VM9412_OM.pdf

Embed Size (px)

Citation preview

  • 8/12/2019 VM9412_OM.pdf

    1/38

    160 D I VWatts PeakWatts enCrteVatios el Mximo

    40Wx4

    VM9412

    VM9412

    Press Audio Enter

    SRC STOPREAR SCNRPT RDM STOPREAR SCNRPT RDM

    PTY

    MUTE

    BAND AS DISP OPENBAND AS DISP OPEN

    BAND CLOSEAS DISP

    PICTUREANGLE / TILT

    Multimedia Receiver

    WIDEWIDE

    Installation and Operation Manual

    video

  • 8/12/2019 VM9412_OM.pdf

    2/38

  • 8/12/2019 VM9412_OM.pdf

    3/38

    i

    CONTENTS

    Thank you for choosing a Jensen product. We hope you will find the instructions in this ownersmanual clear and easy to follow. If you take a few minutes to look through i t, youll learn how touse all the features of your new Jensen VM9412 Mobile Multimedia Receiver for maximum

    enjoyment.Preparation............................................................................................................................ 1Installation ............... ............... ................ ............... ................ ................ ............... ................ . 5

    Anti-Theft Feature ................ ............... ............... ................ ................ ............... ................ .... 6Controls and Indicators ................ ................ ............... ............... ................ ................ ........... 7Remote Control ............... ............... ................. ............... ............... ............... ................ ......... 9Using the TFT Monitor ............... ............... ............... ............... ................ ............... ............. 12Operating Instructions ............... ............... ............... ................ ............... ............... .............. 14Multi-ZONE Operation......................................................................................................... 15Setup Menu......................................................................................................................... 16Tuner Operation ............. ............... ................ ............... ............... ................. ............... ........ 18Satellite Radio Operation ............... ............... ............... ............... ................ ............... ......... 20

    DVD/VCD Video Operation .............. ................ ............... ............... ................ ................ ..... 22DVD/CD Audio Operation ............... ................ ............... ............... ............... ................ ....... 25MP3/WMA/iPod Operation ............. ................ .............. ............... ................ ............... ......... 26Troubleshooting .............. ............... ................. ............... ............... ............... ................ ....... 29Specifications .............. ................. ............... ............... ............... ................. ............... .......... 32

  • 8/12/2019 VM9412_OM.pdf

    4/38

    ii

  • 8/12/2019 VM9412_OM.pdf

    5/38

    1

    VM9412

    PREPARATION

    Congratulations on your purchase of the Jensen VM9412Mobile Multimedia Receiver.

    Its a good idea to read all of the instructions before beginningthe installation. We recommend having your Jensen VM9412installed by a reputable installation shop.

    FeaturesDVD Aspect Ratio - Full, Normal and OFF Fast Forward - 2X, 4X, 8X and 32X Slow Motion - 1/2, 1/4, 1/6 and 1/7 Play, Pause, Stop, Next Chapter and Previous Chapter ESP - 2MB Buffer

    CD / MP3 / WMA ID3 Tag Compatible Directory Search Direct Track Access via Remote control Burn Up To 1500 MP3 / WMA Files onto a DVD+R/RW Audible Forward / Reverse Track Search Random, Repeat and Intro Play, Pause, Stop, Next Track and Previous Track ESP - 2MB Buffer

    AM-FM

    USA/Europe/Latin America/Asia Frequency Spacing 30 Station Presets (18 FM, 12 AM) Auto Stereo/Mono Local/Distance Auto Store/Preview Scan RDS (Radio Data System)Sat Radio Ready Compatible with XM and Sirius Tuners (Sold Separately) Requires XMDJEN100 or JXMC Cables (Sold

    Separately) Satellite Channel Name, Artist, Song and Categories

    Displayed on TFT ScreeniPod jLinkDirect - High Speed Direct Connect Interface to

    Access iPod Playlists, Artists, Albums, Songs, **Photosand **Video (** Requires Photo or Video iPod)

    Power Management Charges iPod while Connected Requires jLinkCable (Sold Separately)

    MediaLink 3

    Under Dash Interface Allows Portable Media Devices tobe Connected

    MediaLink 3 Includes the following connectivity: jLinkDirect 8-pin DIN for iPod 3.5mm Audio Only Input

    RCA Audio/Video InputChassis

    1.0 DIN (Import/ISO-DIN Mountable) Motorized/Swivel Flip-Out/Flip-Up LCD Screen 7" TFT Active Matrix LCD with Anti-Glare Coating Screen Tilt/Angle Adjustment Heat Management System - Forced-Air Cooling to Keep

    the Chip-Sets Operating at Nominal TemperaturesGeneral Navigation Ready (NAV101 Only) 38-Key Infrared Remote Control with 5-Way Joystick Two Composite Video Outputs for Additional Screens Compatible with MZ7TFT Rear Seat Monitors with

    Touch Screen Interface Two Audio/Video Auxiliary Inputs 100-Ohm Preamp Line Output - All Audio Channels 4VRMS Line Output - All Channels Rotary Encoder Audio Control Seven-Band EQ with Eight Preset EQ Curves Spectrum Analyzer Front, Rear, Center and Subwoofer Line Output Subwoofer Crossover and Phase Control Dolby Digital/Pro-Logic ll Programmable Volume Control Rear Camera Input (Normal and Mirror Image View) Auto TFT Dimmer 5-Way JoystickOptional Accessories jLinkCable - iPod interface Cable

  • 8/12/2019 VM9412_OM.pdf

    6/38

  • 8/12/2019 VM9412_OM.pdf

    7/38

  • 8/12/2019 VM9412_OM.pdf

    8/38

    4

    VM9412

    *

    * *

    jLink iPod Cable(Sold Separately)

    iPod NanoiPod MiniiPodiPod Video

    SAT Radio

    SAT L

    SAT R T o H e a d U

    n i t

    VIDEO LEFT RIGHT3.5mm -Audio

    MediaLink

    MEDIALINK AND SATELLITE CONNECTIONS

    *SAT Cable Kit: JXMC or XMDJEN100 (sold separately)

    **XM or Sirius satellite tuner (sold separately)

  • 8/12/2019 VM9412_OM.pdf

    9/38

  • 8/12/2019 VM9412_OM.pdf

    10/38

    6

    VM9412

    ANTI-THEFT FEATURE

    The VM9412 is equipped with an anti-theft feature requiringthe user to enter a password upon initial power on.

    The default user passwor d is 012345 (6 digits).To change the anti-theft and RATINGS protection password,perform the following steps:1. Press the SETUP button (31) on the remote control or

    touch the button on the screen to enter theSETUP menu.

    2. Touch RATINGS to view the RATINGS sub-menu. Thesmall "lock" icon will be unlocked.

    3. Enter a new 6-digit password and press ENTER .

    The "lock" icon will lock and the new anti-theft passwordwill be set, as well as the password for RATINGSprotection (see Rating Sub-menu Features onpage 17).

    NOTE: If you forget your password, contact Custo merService at 1-800-323-4815 for assis tance.

  • 8/12/2019 VM9412_OM.pdf

    11/38

    7

    VM9412

    CONTROLS AND INDICATORS

    Button Operation1. OPEN/CLOSE

    Press to activate the automatic mechanical system andmove the TFT monitor into viewing position. Press again toclose the TFT.2. DISPPress to cycle through information available on the LCDscreen.3. ASPress to automatically store the first six strong stations inpreset memory. Applies to current band only.4. BANDPress the BAND button to change the AM, FM or SATband.5. AUDIORotate to adjust the volume. Press to enter and/or confirmaudio settings.6. SRCPress to select playing mode.7. LCD Display8. MUTE

    Press to silence the receiver. Press again to resume previousvolume level.

    NOTE: The VM9412 features Softmu te, which will allowthe volume to i ncrease or decrease gradually wh en theMUTE function i s activated or deactivated.

    9. IR Remote Control Receiver 10. (left joystic k)DVD/Disc Mode: Press once to play back the previous

    chapter/track.TUNER Mode: Press once to auto-search for the previousavailable radio station.MENU Mode: Press once to move the cursor to the left.11. (down j oystick )DVD/Disc Mode: Press once for slow forward/slow reverse.TUNER Mode: Press to go down one frequency step.MENU Mode: Press once to move the cursor down.12. Reset

    Press to reset system settings to factory default (except thepassword and parental lock setting).

    15

    14

    13

    20

    16

    86 18 199

    VM9412

    s Audio Enter

    SRC STOPREAR SCNRPT RDM

    PTY

    MUTE

    5

    Pres

    2221 1210 11

    BAND AS DISP OPEN

    7 124 3

  • 8/12/2019 VM9412_OM.pdf

    12/38

    8

    VM9412

    7

    15

    14

    13

    20

    16

    86 18 199

    VM9412

    s Audio Enter

    SRC STOPREAR SCNRPT RDM

    PTY

    MUTE

    BAND AS DISP OPENBAND AS DISP OPEN

    BAND CLOSEAS DISP

    PICTUREANGLE / TILT

    Multimedia Receiver

    WIDEWIDE

    17

    124 3

    5

    Pres

    2221 1210 11

    24

    23

    25

    CONTROLS AND INDICATORS

    13.Pause/Play/Enter Press to pause or resume playback or to confirm currentselection.14. (right joystick)DVD/Disc Mode: Press once to enter the next chapter ortrack.TUNER Mode: Press once to auto-search the next availableradio station.MENU Mode: Press once to move the cursor to the right.15. (up joysti ck)DVD/Disc Mode: Press once for fast forward/fast reverse.TUNER Mode: Press to go up one frequency step.MENU Mode: Press once to move the cursor up.16. ( )

    Press once for disc insertion/ejection.Press and hold to reset core mechanism position.17. TFT Displ ay18. REARSelect rear zone source. Allows front passengers to listen tothe radio while rear passengers listen to a CD, MP3, WMA orwatch DVDs.

    19. RPTPress to control repeat playback function.20. SCNPress to initiate Preview Scan.21. RDMPress to control Random playback function.22. STOPRadio Mode: Stop AS/PS/Seek procedure.DVD/Disc Mode: Press the first time to pause playing.

    Press the second time to stop playing and return to the firsttrack/chapter of the disc.23. WIDEPress to adjust the display aspect of the picture to one of twosettings: Full or Normal.24/25. ANGLE/TILT

    Press to activate the tilt function. Use the joystick to makeadjustments while the red tilt icon is flashing. Press once toadjust the downward tilt angle of the screen one step at atime or press and hold to adjust the angle in a continuous

    motion.

  • 8/12/2019 VM9412_OM.pdf

    13/38

    9

    VM9412

    REMOTE CONTROL

    The VM9412 Remote controls both the front and rear zones.To switch from front to rear zone, move the F/R switch (32)located on the right side of the controller.

    29

    3

    4

    5 9

    6

    7

    26

    27

    15

    16

    34

    33

    19

    32

    23

    24

    31

    30

    8

    35

    1

    2

    10

    13

    28

    25

    11

    12

    14

    20

    18

    17

    22

    21

    NOTE: Your remote contro l may differ slightl y from theone pictur ed here. The above diagram is for il lustrativepurposes only.

  • 8/12/2019 VM9412_OM.pdf

    14/38

  • 8/12/2019 VM9412_OM.pdf

    15/38

    11

    VM9412

    PIC 24 Displays Brightness/ContrastControls

    Displays Brightness/ContrastControls

    Displays Brightness/ContrastControls

    Displays Brightness/ContrastControls

    Displays Brightness/ContrastControls

    Displays Brightness/ContrastControls

    OPEN/CLOSE

    25 Opens/c loses the TFT moni-tor

    Opens/closes the TFT moni-tor

    Opens/closes the TFT moni-tor

    Opens/closes the TFT moni-tor

    Opens/closes the TFT monitor Opens/Closes the TFT monitor

    TILT 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle

    TILT 27 Increases monitor til t angle Increases monitor t il t angle Increases monitor ti lt angle Increases monitor t il t angle Increases monitor ti lt angle Increases monitor ti lt angle

    WIDE 28 Selects display mode: CIN-EMA, NORMAL or Standby

    Selects display mode: CIN-EMA, NORMAL or Standby

    Selects display mode: CIN-EMA or Standby

    Selects display mode: CIN-EMA or Standby

    Selects display mode: CIN-EMA or Standby

    Selects display mode: CIN-EMA or Standby

    1, 2, 3, 4, 5,6, 7, 8, 9, 0(NumericKeypad)

    29 Directly accesses chapter 1-6 selects preset for currentband

    Directly accesses track 1-6 selects preset for currentband

    PIP 30 Picture In Picture view ofexisting video

    Picture In Picture view ofexisting video

    Picture In Picture view of exist-ing video

    SETUP 31 Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu

    F/R 32 F controls front zoneR controls rear zone

    F controls front zoneR controls rear zone

    F controls front zoneR controls rear zone

    F controls front zoneR controls rear zone

    F controls front zoneR controls rear zone

    F controls front zoneR controls rear zone

    RDM 33 Plays all chapters in randomorder

    Plays all tracks in randomorder

    Plays all tracks in randomorder

    SCN 34 Preview scan Plays the first ten seconds ofeach track

    Preview scan

    EJECT 35 Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc

    Table 1: Remote Control Funct ions

    Button Function

    Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod

  • 8/12/2019 VM9412_OM.pdf

    16/38

  • 8/12/2019 VM9412_OM.pdf

    17/38

  • 8/12/2019 VM9412_OM.pdf

    18/38

  • 8/12/2019 VM9412_OM.pdf

    19/38

    15

    VM9412

    MULTI-ZONE OPERATION

    Independent sources can be played simultaneously on theVM9412. For example, a video game console can be seen onthe front screen while DVD video is available to rearpassengers.Connecting the Rear Zone Touch Screen

    You can connect up to two additional monitors (soldseparately) for rear passengers, one of which can be a TouchScreen. You can also connect a wireless headphone systemto one of your rear monitors, as il lustrated below.

    Changing th e Rear Zone SourceTo access the SOURCE MENU, touch the TFT screen in thetop left corner of the screen.

    This menu allows you to select a source for the front or rearzone. Touch FRONT or REAR to choose the zone for whichyou would like to specify the source.Controlli ng th e Rear Zone Screen(s)

    If you have a rear touch screen installed, you can touch the

    screen to control most rear zone functions.

    NOTE: The rear zone volume can only b e controll ed fromthe front.

    You can also use the remote control. The VM9412 remotecontrols both the front and rear zones. To switch from front torear zone, move the F/R switch (32) located on the right sideof the remote controller.

    NOTE: You cannot ch ange or contro l the front zonesource from the rear zone video screen.

    Turning the Rear Screen Off Touch the OFF button (on the SOURCE MENU) to suspendoperation of the rear screen. Any operation assignedexclusively to the rear source will be suspended untilreactivated using either the front or rear zone touch screen orthe remote control.

    YELLOW

    BLACK

    MZ7TFTTouch Screen(Sold Separately)

    WHITE

    RED

    Wireless Headphone(OPTIONAL)

    VIDEO OUT 2

    MZ-TFT

    H E A D P H O N E

    M U L T I Z O N E

    YELLOW

    VIDEO OUT 1

    Rear Video Screen(Sold Separately)

    DIS SOURCE MENU

    DISC RADIO NAV

    iPod SAT CAMERA

    AUX 1 AUX 2OFF

    FRONT

    RE AR

  • 8/12/2019 VM9412_OM.pdf

    20/38

  • 8/12/2019 VM9412_OM.pdf

    21/38

  • 8/12/2019 VM9412_OM.pdf

    22/38

    VM9412

  • 8/12/2019 VM9412_OM.pdf

    23/38

    19

    VM9412

    close the menu). The preset number and stationappears highlighted.

    Recalling a Station1. Select a band (if needed).2. Touch an on-screen preset button (6) to select the

    corresponding stored station.

    Auto Store (AS)To select six strong stations and store them in the currentband:1. Select a band (if needed).2. Press the AS button (3) on the control panel or touch AS

    on the screen for 2 seconds to activate the Auto Storefunction.

    The new stations replace stations already stored in that band.

    Preview Scan (PS)To scan the AM or FM band for a preview of available stationsin your particular area, touch the PS button (21) on page twoof the on-screen controls. Touch again to stop preview scan.

    Local Radio Station Seeking (LOC)When the Local function is on, only radio stations with astrong local radio signal are played. To activate the Localfunction in AM/FM tuner mode, touch the 1/2 button to accessthe second screen of menu options, and then touch the on-

    screen LOC button. Touch the LOC button again to turn Localoff. When the Local function is active, the LOC indicator atthe top of the screen is illuminated.

    P1 87.5 MHz

    P2 90.1 MHz

    P3 98.1 MHz

    P4 106.1 MHz

    P5 107.9 MHz

    P6 102.9 MHz

  • 8/12/2019 VM9412_OM.pdf

    24/38

    VM9412

  • 8/12/2019 VM9412_OM.pdf

    25/38

    21

    While in Search Mode, to switch between Channel andCategory search modes, press the CH or CAT buttonson the touch screen.

    Use the scroll bar and arrows on the touch screen toview the next/previous page of stations. Each pagecontains six channels to select from.

    Press the on-screen SCN button to preview each of the6 channels displayed for 10 seconds.

    Press the CG button to return to the Preset Modescreen.

    To select a channel while in Channel Guide mode, touch

    the channel name on the screen. The channel will beginplaying and the unit will return to the Preset Mode.

    Category Guide ModeWhen Category Mode is selected, folder icons appear on thescreen next to category choices. While in Search Mode, to switch between Channel and

    Category search modes, press the CH or CAT buttonson the touch screen.

    Use the scroll bar and arrows on the touch screen toview the next/previous page of categories. Each page

    contains six categories to select from. To select a category, touch the corresponding categoryname or folder icon. The channels in that category willbe displayed on the screen.

    Use the scroll bar and arrows on the touch screen toview the next/previous six stations in the selectedcategory.

    Touch the on-screen SCN button to preview eachchannel in the selected category for 10 seconds.

    Touch the channel name to play that channel. Touch the on-screen CG button to return to the Preset

    Mode screen.

    S T SAT1 CH00101:02

    EQ

    CG

    SCN MEM DIAG

    ########

    001 XM Preview

    004 The 40s

    005 The 50s

    006 The 60s

    007 The 70s

    Title: www.xmradio.com

    XM Preview Preview

    CH

    CAT

  • 8/12/2019 VM9412_OM.pdf

    26/38

  • 8/12/2019 VM9412_OM.pdf

    27/38

  • 8/12/2019 VM9412_OM.pdf

    28/38

  • 8/12/2019 VM9412_OM.pdf

    29/38

  • 8/12/2019 VM9412_OM.pdf

    30/38

  • 8/12/2019 VM9412_OM.pdf

    31/38

  • 8/12/2019 VM9412_OM.pdf

    32/38

  • 8/12/2019 VM9412_OM.pdf

    33/38

    VM9412

  • 8/12/2019 VM9412_OM.pdf

    34/38

    30

    Error Messages

    Disc does not play back Disc is warped or scratched Use disc in good condition

    Disc is dirty or wet Clean disc with soft clothLaser pickup is dirty Clean laser pickup with cleaning disc

    Incompatible disc is used Use compatible disc

    Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction

    Disc region code is not compatible with unit Use disc with proper region code

    Disc is inserted upside down Insert disc with label side up

    Image blurred, distorted, or dark Disc is illegally copied Use original disc

    PBC cannot be used during VCD playback PCB is not available on the disc

    No repeat or searching while playing VCD PCB is on Turn PCB off

    MP3Interruption occurred during playback Disc is dirty or scratched Clean disc or replace

    File is damaged/bad recording Recreate disc with good files

    Incorrect playback message displayed Message is longer than LCD can display

    SAT RADIO

    No Sound Incorrect cable connections Check RCA cables

    Satellite source not available Incorrect cable connections Check Satellite Data cable

    IPOD

    iPod source not available Incorrect cable connections Check jLink and MediaLink cables

    Cannot see video and photo media on TFT screen Wrong iPod Video Settings Change iPod video settings to TV Out = On

    Table 7: Troubleshoot ing

    Problem Cause Corrective Action

    Table 8: Error Messages

    Message Displayed Cause Corrective Action

    Loading Disc is being read

    No Disc Disc is dirty Clean disc with soft cloth

    Disc is upside down Insert disc with label side up

    Disc not present in loading compartment Insert disc

    Bad Disc Disc is dirty Clean disc with soft cloth

    Disc is upside down Insert disc with label side up

    Unknown disc Disc format is not compatible with this unit

    Region Error DVD is not compatible with region code of unit

    Error Illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism

  • 8/12/2019 VM9412_OM.pdf

    35/38

    VM9412

  • 8/12/2019 VM9412_OM.pdf

    36/38

    32

    SPECIFICATIONS

    DVD/CD Player Compatible Disc Media: DVD +/- R/RW (Single and DualLayer) and CD-R / RW

    Compatible Media Formats: CD-DA, MP3, WMA, VCD,SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak picture CD(JPEG).Signal to Noise Ratio: >95dBADynamic Range: >95dBFrequency Response: 20Hz to 20 kHz, -3dBChannel Separation: > 60dB @ 1 kHzD/A Converter: High performance 24-bit / 192 kHz samplerate, Multi-Bit Sigma-Delta ModulatorVideoFormat: NTSC, PAL (auto-detection)Output: 1Vp-p (75-ohm)Input: 1Vp-p (75-ohm)FM Tuner Mono Sensitivity (-30dB): 9dBf Quieting Sensitivity (-50dB): 15dBf

    Alternate Channel Selectivity: 70dBSignal to Noise Ratio @ 1 kHz: 58dBImage Rejection: 80dBStereo Separation @ 1 kHz: >30dBFrequency Response: 30Hz - 15 kHz, -3dB

    AM Tuner Sensitivity (-20dB): 15uVSignal to Noise Ratio @ 1 kHz: 50dBImage Rejection: 60dBFrequency Response: 50Hz - 2 kHz, -3dBMonitor Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen

    6.06" (154.1mm) W X 3.42" (87mm) HScreen Type: TFT Liquid Crystal Display (LCD) active matrixResponse Time: 30mSec rise time, 50mSec fall timeResolution:

    336,960 sub pixels, 1440 (W) X 234 (H)Viewing angle:

    65 degrees left or right 40 degrees up 65 degrees down

    General Auxiliary Input Impedance: 10k-ohmPower Supply: 11 to 16VDC, negative groundPower Antenna (Blue): 500mA max, current limited protection

    Amplifier Remote (Blue/White): 500mA max, current limited

    protectionOperating Temperature: -20C ~ 65C

    Fuse: 15-amp, mini ATM typeDIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x50mm)

    CEA Power Ratings

    Power Output: 13 Watts RMS x 4 channels into 4-Ohms @