Vishay BCcomponents Metallized Polyester Film Capacitors MKT … · 2010. 4. 2. · Document Number: 28106 For technical questi ons contact: filmcaps [email protected] Revision:

Document Number: 28106 For technical questions contact: [email protected] www.vishay.comRevision: 21-Nov-05 89

MKT 468 MKT/MKT 468Vishay BCcomponents

Metallized Polyester Film CapacitorsMKT Radial Epoxy Lacquered Type

APPLICATIONS

Blocking and coupling. Bypass and energy reservoir

MARKING

C-value; tolerance; rated voltage; code for manufacturer; manufacturer’s type designation; manufacturer’s symbol

DIELECTRIC

Polyester film

ELECTRODES

Vacuum deposited aluminum

COATING

Flame retardant epoxy material (UL-class 94 V-0)

CONSTRUCTION

Wound mono construction

LEADS

Tinned wire

CAPACITANCE RANGE (E12 SERIES)

0.001 to 10 µF

FEATURES

Available taped and loose in box

Lead (Pb)-free product

RoHS-compliant product

CAPACITANCE TOLERANCE

± 10 %; ± 5 %

RATED (DC) VOLTAGE

100 V; 250 V; 400 V; 630 V; 1000 V

RATED (AC) VOLTAGE

63 V; 160 V; 220 V; 250 V; 250 V

CLIMATIC CATEGORY

55/105/56

RATED TEMPERATURE

85 °C

MAXIMUM APPLICATION TEMPERATURE

105 °C

REFERENCE SPECIFICATIONS

IEC 60384-2

PERFORMANCE GRADE

Grade 1 (long life)

MATERIALS

Qualified in accordance with UL94 V-0

DETAIL SPECIFICATION

For more detailed data and test requirements contact:[email protected]

168x12(halfpage)

seating plane (1)

α°

(2)

PØdt

wl

h

lt

A

w

h'

l

F'

F(3)

10

Ødt

H

15

Dimensions in mm(1) Hole ∅ 1.3 for dt = 0.8 mm

(2) 0 ≤ α < 50°(3) ⎪F − F’⎪ < 0.3 mm

F = 7.5 + 0.6/− 0.1 mm

(4) A = 2.5 + 1.4/− 0.5 mm

e3

RoHSCOMPLIANT

www.vishay.com For technical questions contact: [email protected] Document Number: 2810690 Revision: 21-Nov-05

MKT 468 MKT/MKT 468Vishay BCcomponents Metallized Polyester Film Capacitors

MKT Radial Epoxy Lacquered Type

COMPOSITION OF CATALOG NUMBER

SPECIFIC REFERENCE DATA

DESCRIPTION VALUE

Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHzC ≤ 0.1 µF ≤ 75 × 10−4 ≤ 120 × 10−4 ≤ 200 × 10−4

0.1 µF < C ≤ 0.47 µF ≤ 75 × 10−4 ≤ 120 × 10−4 ≤ 225 × 10−4

0.47 µF < C ≤ 10 µF ≤ 75 × 10−4 ≤ 120 × 10−4 −Rated voltage pulse slope (dU/dt)R: at 100 V (DC) at 250 V (DC) at 400 V (DC) at 630 V (DC) at 1000 V (DC)lmax = 17.5 mm 20 V/µs 45 V/µs 65 V/µs 90 V/µs 200 V/µslmax = 26.0 mm 10 V/µs 20 V/µs 30 V/µs 35 V/µs 120 V/µslmax = 30.0 mm 15 V/µs 25 V/µs 30 V/µs 100 V/µsR between leads, for C ≤ 0.33 µF:at 100 V; 1 minute > 30000 MΩ > 30000 MΩat 500 V; 1 minute > 30000 MΩ > 30000 MΩRC between leads, for C > 0.33 µF: 1 minuteat 100 V; 1 minute > 5000 s > 10000 s > 10000 sat 500 V; 1 minute >10 000 sR between interconnecting leads and casing; 100 V; 1 minute

> 30000 MΩ > 30000 MΩ > 30000 MΩ > 30000 MΩ > 30000 MΩ

Withstanding (DC) voltage (cut off current 10 mA);rise time 100 V/s

160 V; 1 minute 400 V; 1 minute 640 V; 1 minute 1008 V; 1 minute 1600 V; 1 minute

Withstanding (DC) voltage between leads and case 200 V; 1 minute 500 V; 1 minute 800 V; 1 minute 1260 V; 1 minute 2000 V; 1 minute

2222 468 XX XX XBFC2* 468 XX XX X

TYPE PACKAGING LEAD CONFIGURATIONPREFERRED TYPES

C-TOL 100 V 250 V 400 V 630 V 1000 V

MKT 468

loose in box lead length 3.5 + 1.0/- 0.5 mm± 10 % 04 16 28 40 -± 5 % 05 17 29 41 -

Taped on reel(bent back)

H = 16.0 mm; P0 = 15.0 mm;reel diameter = 500 mm

± 10 % 61 63 65 67 -± 5 % 62 64 66 68 -dimensions of these code numbers stay between brackets

MKT/MKT 468 loose in box lead length 3.5 + 1.0/- 0.5 mm ± 10 % - - - - 60

ON REQUEST

MKT 468loose in box

long leads:19.0 ± 4.0 mm for lead pitch = 15.0 mm25.0 ± 4.0 mm for lead pitch = 22.5 mm24.0 ± 4.0 mm for lead pitch = 27.5 mm

± 10 % 51 53 55 57 -

± 5 % 52 54 56 58 -

taped on reelH = 16.0 mm; P0 = 12.7 mm;reel diameter = 500 mm

± 10 % 06 18 30 42 -± 5 % 07 19 31 43 -

TYPE AND PITCHES

468

15/7.5 mm15.0 mm22.5 mm27.5 mm

MULTIPLIER(nF)

0.1 2

1 3

10 4

100 5

CAPACITANCE

(numerically)

Example:

104 = 10 x 10 = 100 nF

* Use this partnumber for those with access to theVishay’s SAP system and Partners website withinthe Americas


MKT 468Metallized Polyester Film CapacitorsMKT Radial Epoxy Lacquered Type

Vishay BCcomponents

URdc = 100 V; URac = 63 V

URdc = 250 V; URac = 160 V

C(µF)

DIMENSIONSWmax × H (H’)max × Lmax

(mm)

MASS(g)

CATALOG NUMBER 2222 468 ..... AND PACKAGINGLOOSE IN BOX REEL

lt =3.5 ± 0.5 mm

SHORT LEADS

LONG LEADS

ORIGINAL

PITCH

pitch = 7.5 mm(bent back)

C-tol =± 10 %

C-tol =± 5 %

C-tol =± 10 %

C-tol =± 5 %

LAST 5 DIGITS OFCATALOG NUMBER

SPQ SPQ SPQ LAST 5 DIGITS OF

CATALOG NUMBER

SPQ

Pitch = 15.0 ± 0.4 mm; dt = 0.80 ± 0.08 mm pitch = 7.5 mm (bent back)

1.2 5.5 × 14.5 (16.0) × 17.5 0.7 04125 05125 2000 1250 1100 61125 62125 900

1.5 6.0 × 15.0 (16.5) × 17.5 0.9 04155 05155 2000 1250 1000 61155 62155 800

1.8 6.5 × 15.5 (17.0) × 17.5 1.0 04185 05185 1500 1000 900 61185 62185 750

2.2 7.0 × 16.0 (17.5) × 17.5 1.2 04225 05225 1250 1000 800 61225 62225 700

2.7 8.0 × 17.0 (18.5) × 17.5 1.4 04275 05275 1000 1000 750 61275 62275 600

3.3 8.5 × 17.5 (19.0) × 17.5 1.5 04335 05335 1000 1000 700 61335 62335 550


3.9 6.5 × 18.5 × 26.0 2.8 04395 05395 1000 750 650

4.7 7.0 × 19.5 × 26.0 3.2 04475 05475 900 700 550

5.6 7.5 × 20.0 × 26.0 3.5 04565 05565 750 600 500

6.8 8.5 × 21.5 × 26.0 4.1 04685 05685 750 500 450

8.2 9.5 × 22.5 × 26.0 4.8 04825 05825 700 500 400

10.0 10.5 × 23.5 × 26.0 5.5 04106 05106 500 400 350

C(µF)


(mm)

MASS(g)


lt =3.5 ± 0.5 mm

SHORT LEADS

LONG LEADS

ORIGINAL

PITCH


C-tol =± 10 %

C-tol =± 5 %

C-tol =± 10 %

C-tol =± 5 %



CATALOG NUMBER

SPQ


0.27 5.0 × 14.0 (15.5) × 17.5 0.6 16274 17274 2000 1250 1200 63274 64274 1000

0.33 5.5 × 14.5 (16.0) × 17.5 0.7 16334 17334 2000 1250 1100 63334 64334 900

0.39 6.0 × 15.0 (16.5) × 17.5 0.9 16394 17394 2000 1250 1000 63394 64394 800

0.47 6.5 × 15.5 (17.0) × 17.5 1.0 16474 17474 1500 1000 900 63474 64474 750

0.56 7.5 × 16.5 (18.0) × 17.5 1.3 16564 17564 1250 1000 800 63564 64564 650

0.68 8.0 × 17.0 (18.5) × 17.5 1.4 16684 17684 1000 1000 750 63684 64684 600

0.82 8.5 × 17.5 (19.0) × 17.5 1.5 16824 17824 1000 1000 700 63824 64824 550

1.0 8.0 × 20.0 (21.5) × 17.5 1.7 16105 17105 1000 900 750 63105 64105 600


1.2 7.0 × 19.0 × 26.0 3.2 16125 17125 1000 700 550

1.5 8.0 × 21.0 × 26.0 3.8 16155 17155 750 500 500

1.8 9.0 × 22.0 × 26.0 4.1 16185 17185 750 500 450

2.2 9.8 × 23.0 × 26.0 4.8 16225 17225 750 450 400

2.7 11.0 × 24.0 × 26.0 5.9 16275 17275 500 400 350


MKT 468Vishay BCcomponents Metallized Polyester Film Capacitors


URdc = 400 V; URac = 220 V

3.3 12.5 × 25.5 × 26.0 6.9 16335 17335 500 300 350

3.9 13.5 × 26.5 × 26.0 7.5 16395 17395 400 300 300

4.7 14.9 × 28.0 × 26.0 8.6 16475 17475 250 250 250

Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm; A = 2.5 + 1.4/− 0.5 mm pitch = 7.5 mm (bent back)

5.6 15.0 × 28.0 × 30.0 9.1 16565 17565 300 200

C(µF)


(mm)

MASS(g)


lt =3.5 ± 0.5 mm

SHORT LEADS

LONG LEADS

ORIGINAL

PITCH


C-tol =± 10 %

C-tol =± 5 %

C-tol =± 10 %

C-tol =± 5 %



CATALOG NUMBER

SPQ


0.12 5.0 × 14.0 (15.5) × 17.5 0.6 28124 29124 2000 1250 1200 65124 66124 1000

0.15 5.8 × 15.0 (16.5) × 17.5 0.9 28154 29154 1750 1250 1100 65154 66154 850

0.18 6.5 × 15.5 (17.0) × 17.5 1.0 28184 29184 1500 1000 900 65184 66184 750

0.22 7.0 × 15.5 (17.5) × 17.5 1.2 28224 29224 1500 1000 800 65224 66224 700

0.27 7.4 × 16.5 (18.0) × 17.5 1.3 28274 29274 1250 1250 800 65274 66274 650

0.33 8.5 × 17.5 (19.0) × 17.5 1.5 28334 29334 1000 1000 700 65334 66334 550

0.39 7.4 × 19.5 (21.0) × 17.5 1.3 28394 29394 1000 1000 800 65394 66394 650

0.47 8.4 × 20.5 (22.0) × 17.5 1.5 28474 29474 750 850 700 65474 66474 550


0.56 7.5 × 19.5 × 26.0 3.2 28564 29564 1000 650 550

0.68 8.0 × 21.0 × 26.0 3.8 28684 29684 750 500 500

0.82 9.0 × 22.0 × 26.0 4.5 28824 29824 750 500 450

1.0 9.9 × 23.0 × 26.0 5.2 28105 29105 750 450 400

1.2 11.0 × 24.0 × 26.0 5.9 28125 29125 500 400 350

Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm; A = 2.5 + 1.4/− 0.5 mm pitch = 7.5 mm (bent back)

1.5 11.5 × 24.5 × 30.0 6.5 28155 29155 450 300

1.8 12.5 × 25.5 × 30.0 7.1 28185 29185 350 250

2.2 14.0 × 27.0 × 30.0 8.2 28225 29225 300 200

C(µF)


(mm)

MASS(g)


lt =3.5 ± 0.5 mm

SHORT LEADS

LONG LEADS

ORIGINAL

PITCH


C-tol =± 10 %

C-tol =± 5 %

C-tol =± 10 %

C-tol =± 5 %



CATALOG NUMBER

SPQ


MKT/MKT 468Metallized Polyester Film CapacitorsMKT Radial Epoxy Lacquered Type

Vishay BCcomponents

URdc = 630 V; URac = 250 V

URdc = 1000 V; URac = 400 V

C(µF)


(mm)

MASS(g)

CATALOG NUMBER 2222 468 ..... AND PACKAGING

LOOSE IN BOX REEL

lt =3.5 ± 0.5 mm

SHORT LEADS

LONG LEADS

ORIGINAL PITCH


C-tol =± 10 %

C-tol =± 5 %

C-tol =± 10 %

C-tol =± 5 %


SPQ SPQ SPQ LAST 5 DIGITS OFCATALOG

SPQ

Pitch = 15.0 ± 0.4 mm; dt = 0.80 ± 0.08 mm pitch = 7.5 mm (bent back)0.039 5.0 × 14.0 (15.5) × 17.5 0.6 40393 41393 2000 1250 1200 67393 68393 10000.047 5.5 × 14.5 (16.0) × 17.5 0.7 40473 41473 2000 1250 1100 67473 68473 9000.056 5.9 × 15.0 (16.5) × 17.5 0.9 40563 41563 1750 1250 1000 67563 68563 8500.068 6.5 × 16.0 (17.5) × 17.5 1.2 40683 41683 1500 1000 800 67683 68683 7500.082 7.3 × 16.5 (18.0) × 17.5 1.3 40823 41823 1500 1000 800 67823 68823 6500.1 7.9 × 17.0 (18.5) × 17.5 1.4 40104 41104 1250 1000 750 67104 68104 6000.12 7.5 × 19.5 (21.0) × 17.5 1.3 40124 41124 1250 1000 800 67124 68124 6500.15 8.5 × 20.5 (22.0) × 17.5 1.5 40154 41154 1000 850 700 67154 68154 550

Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm pitch = 7.5 mm (bent back)0.18 7.5 × 19.5 × 26.0 3.5 40184 41184 1000 650 5500.22 8.0 × 21.0 × 26.0 3.8 40224 41224 750 500 5000.27 9.0 × 22.0 × 26.0 4.5 40274 41274 750 500 4500.33 10.0 × 23.0 × 26.0 5.2 40334 41334 700 450 4000.39 11.5 × 24.0 × 26.0 5.9 40394 41394 600 400 3500.47 12.5 × 25.5 × 26.0 6.9 40474 41474 500 300 3500.56 13.5 × 26.6 × 26.0 7.5 40564 41564 450 300 3000.68 15.0 × 28.0 × 26.0 8.6 40684 41684 400 250 250

Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm; A = 2.5 + 1.4/− 0.5 mm pitch = 7.5 mm (bent back)0.82 15.0 × 28.0 × 30.0 8.8 40824 41824 300 200

C(µF)


(mm)

MASS(g)

CATALOG NUMBER 2222 468 ..... AND PACKAGING

LOOSE IN BOX

lt = 3.5 ± 0.5 mm

C-tol = ± 10 %

LAST 5 DIGITS OF CATALOG SPQPitch = 15.0 ± 0.4 mm; dt = 0.80 ± 0.08 mm

0.015 6.0 × 15.0 × 17.5 0.6 60153 20000.018 6.5 × 15.5 × 17.5 0.7 60183 15000.022 7.2 × 16.2 × 17.5 0.9 60223 15000.027 8.0 × 17.0 × 17.5 1.0 60273 15000.033 8.8 × 17.8 × 17.5 1.4 60333 10000.039 9.6 × 18.6 × 17.5 1.5 60393 10000.047 10.6 × 19.6 × 17.5 1.8 60473 900

Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm0.056 7.0 × 20.0 × 26.0 3.2 60563 9000.068 8.0 × 21.0 × 26.0 3.8 60683 7500.082 8.5 × 21.5 × 26.0 4.1 60823 7500.1 9.5 × 22.5 × 26.0 4.8 60104 7000.12 10.5 × 23.5 × 26.0 5.5 60124 500

Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm0.15 10.5 × 23.5 × 30.0 5.8 60154 5000.18 11.5 × 24.5 × 30.0 6.5 60184 4500.22 13.0 × 26.0 × 30.0 7.5 60224 350




MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY

Tamb ≤ 85 °C, 100 VDC

AC

vol

tage

(V)

102

10 1

10 0f (Hz)10

210

310

410

510

6

2.2 µF10 µF

1.2 µF

AC

vol

tage

(V)

102

10 1

10 0

f (Hz)101

102

103

104

105

85 °C < Tamb ≤ 105 °C, 100 VDC

2.2 µF10 µF

1.2 µF

AC

vol

tage

(V)

103

10 1

10 0

f (Hz)101

102

103

104

106

10 2

105

Tamb ≤ 85 °C, 250 VDC

270 nF5.6 µF

2.2 µF

AC

vol

tage

(V)

103

10 1

10 0

f (Hz)101

102

103

104

106

10 2

105

85 °C < Tamb ≤ 105 °C, 250 VDC

270 nF5.6 µF

2.2 µF

AC

vol

tage

(V)

103

10 1

10 0f (Hz)10

110

210

310

410

6

10 2

105

Tamb ≤ 85 °C, 400 VDC

120 nF470 nF2.2 µF

AC

vol

tage

(V)

103

10 1

10 0

f (Hz)101

102

103

104

106

10 2

105

85 °C < Tamb ≤ 105 °C, 400 VDC

120 nF470 nF2.2 µF


MKT 468 MKT/MKT 468Metallized Polyester Film CapacitorsMKT Radial Epoxy Lacquered Type

Vishay BCcomponentsA

C v

olta

ge

(V

)

103

10 1

10 0f (Hz)10

110

210

310

410

6

10 2

105

Tamb ≤ 85 °C, 630 VDC

39 nF100 nF820 nF

AC

vol

tage

(V)

103

10 1

10 0

f (Hz)101

102

103

104

106

10 2

105

85 °C < Tamb ≤ 105 °C, 630 VDC

39 nF100 nF820 nF

AC

vol

tage

(V)

103

10 1

10 0

f (Hz)101

102

103

104

106

10 2

105

Tamb ≤ 85 °C, 1000 VDC

15 nF100 nF

220 nF

AC

vol

tage

(V)

103

10 1

10 0

f (Hz)101

102

103

104

106

10 2

105

85 °C < Tamb ≤ 105 °C, 1000 VDC

15 nF100 nF

220 nF

CAPACITANCE

f (Hz)102

103

104

105

∆C/C

(%

)2

0

-1

-2

-3

1

typical

1 kHz, 1 V

-60

C/C

(%

)6

2

0

-2

-4

-6

4

-20 20 60 100Tamb (C)

min.

max. 400 V - 630 V - 1000 V

250 V

100 V




IMPEDANCE

630 V; 150 nF400 V; 1.0 µF100 V; 10 µF

Impe

danc

e

()

102

10 0

f (Hz)106

104

105

107

108

10-1

10-3

10-2

Document Number: 91000 www.vishay.comRevision: 18-Jul-08 1

Disclaimer

Legal Disclaimer NoticeVishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained hereinor in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of anyinformation provided herein to the maximum extent permitted by law. The product specifications do not expand orotherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressedtherein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by thisdocument or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unlessotherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in suchapplications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resultingfrom such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regardingproducts designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 28139 For technical questions, contact: [email protected] www.vishay.comRevision: 02-Jul-08 25

Taping, Special Kinking, Packaging and Labelling InformationVishay BCcomponents

1. TAPING INFORMATION

1.1. RADIAL POTTED FILM CAPACITORS (DIMENSIONS IN mm)

1.1.1. RADIAL POTTED STRAIGHT LEADS

PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H)


6.35 ± 0.20

0.5 ± 0.5

12.0 ± 0.1

12.7 ± 0.2

Ø 4.0 ± 0.2

0.7 ± 0.2

detail A

32 max.

1 max.1 max. 1 max. 1 max.

11 max.9.0 ± 0.5

5.0 + 0.5- 0.1

18.5 ± 0.5

A18.0 ± 0.5

(12.7)

(3.85)

direction of unreeling

6.35 ± 0.20

0.5 ± 0.5

18.0 ± 0.5

12.7 ± 0.5

Ø 4.0 ± 0.2

9.0 ± 0.5

18.5 ± 0.5

5.08

1 max.

32 max.

1 max.1 max. 1 max.

+ 0.50- 0.10

11 max.

A

0.7 ± 0.2

12.0 ± 0.1

(12.7)

(3.81)

direction of unreelingdetail A

www.vishay.com For technical questions, contact: [email protected] Document Number: 2813926 Revision: 02-Jul-08




12.7 ± 0.2

0.5 ± 0.5

12.0 ± 0.118.0 ± 0.5

(8.95)

12.7 ± 0.2

Ø 4.0 ± 0.2

9.0 ± 0.5

0.7 ± 0.2

detail A

18.5 ± 0.5

11 max.

7.5 + 0.5- 0.1

(12.7) 1 max. 1 max. 1 max.

32 max.

A

1 max.


direction of unreelingØ 4.0 ± 0.2 0.7 ± 0.2

9.0 ± 0.5

18.5 ± 0.5

32 max.

1 max.1 max.1 max.(12.7)

(8.89)

12.7 ± 0.2

0.5 ± 0.5

12.0 ± 0.118.0 ± 0.5

12.7 ± 0.2

1 max.

11 max.

A

detail A

7.62 ± 0.30





0.5 ± 0.5

12.0 ± 0.1

15 ± 0.2

Ø 4.0 ± 0.2

0.7 ± 0.2

32 max.

1 max.

1 max.

11 max.9.0 ± 0.5

7.5 + 0.5- 0.1

18.5 ± 0.5

18.0 ± 0.5

(15 ± 0.2 ) (15)

(3.75)


F =

1 max.

1 max.

0.5 ± 0.5

12.0 ± 0.1

15 ± 0.2 Ø 4.0 ± 0.2

0.7 ± 0.2

32 max.

1 max.1 max.

11 max.9.0 ± 0.5

7.62 + 0.5- 0.1

18.5 ± 0.5

18.0 ± 0.5

(15 ± 0.2 )

(3.69)


F = (15)

1 max.

1 max.





direction of unreelingØ 4.0 ± 0.2

9.5 ± 0.5

0.7 ± 0.2

detail A

18.5 ± 0.511 max.

32 max.

A

2 max.2 max.12.7 ± 0.4 (25.4)

0.50 + 1.5- 0.0 10.0+ 0.5

- 0.1

18.0 ± 0.512.0 ± 0.1

(7.7)

12.7 ± 0.2

1.3 max. 1.3 max.

15.0 ± 0.4

0.5 ± 0.5

15.0 ± 0.2 Ø 4.0 ± 0.2(5)

18.0

± 0

.512

.0 ±

0.1

1.0 max.1.0 max.

10.0 + 0.5- 0.1

1.0 max.

32 max.

18.5 ± 0.5

9.0 ± 0.5

0.7 ± 0.2

detail A

A

11 max.

1.0 max.



PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); ONE TAPE

PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); TWO TAPES

(25.4)

12.7 ± 0.4

12.0 ± 0.118.0 ± 0.5

4.0 ± 0.2 12.7 ± 0.2


(5.2)

0.5 + 1.5- 0.0 15.0 + 0.5

- 0.1 18.5 ± 0.5

9.0 ± 0.5

0.7 ± 0.2

detail A

A

1.3 max. 1.3 max. 2 max.

11 max.

35 max.

2 max.


(25.4)

0.5 + 1.5- 0.0 15.0 + 0.5

- 0.1

1.3 max. 1.3 max.

12.7 ± 0.4

6.0 ± 0.1

18.0 ± 0.5

6.0 ± 0.1

12.7 ± 0.2

9.0 ± 0.5

18.5 ± 0.5

0.7 ± 0.2

detail A

A

11 max.

35 max.

2 max. 2 max.

(5.2)

Ø 4.0 ± 0.2





19.05 ± 1.00

18.0 ± 0.5

4.0 ± 0.2

direction ofunreeling

18.5 ± 0.5

0.7 ± 0.2

detail A

A

9.0 ± 0.512.0 ± 0.1

0.5 + 1.5- 0.0 22.5+ 1.5

- 0.1

22.5 + 1.5- 0.0

(38.1)

1.3 max.

40 max.

2 max. 2 max.

11 max.

1.3 max.

(7.8)

12.7 ± 0.2

19.05 ± 0.40

18.0 ± 0.5

6.0 ± 0.1

6.0 ± 0.1

12.7 ± 0.2

Ø 4.0 ± 0.20.7 ± 0.2

9.0 ± 0.5

18.5 ± 0.5

direction ofunreeling

22.5

(38.1)

1.3 max. 1.3 max.

11 max.

40 max.

2 max. 2 max.

A

detail A

7.8

0.5 + 1.5- 0.0

+ 0.5- 0.1



1.1.2. RADIAL POTTED KINKED LEADS


1.1.3. RADIAL POTTED BENT BACK LEADS

PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H)(original pitch = 10.0 mm)

6.35 ± 0.20

0.5 ± 0.1

12.7 ± 0.2

4.0 ± 0.2direction of unreeling

1.7 ± 0.4

18.0 ± 0.112.0 ± 0.1

(12.7)

(3.81)

1.0 max. 1.0 max. 1.0 max.

11 max.

1.0 max.

32 max.

20 ± 0.5

0.7 ± 0.2

detail A

A

(*) distance betweenseating plane andsprocket hole

9.0 ± 0.5

16 ± 0.5 (*)

35° ± 25°5.08 + 0.40

- 0.20

(15) 1.0 max.

0.7 ± 0.2

9.0 ± 0.5

Ø 4.0 ± 0.2

15.5

15 ± 0.2

0.5 ± 0.5

(3.75)7.5 ± 0.4

18.0

± 0

.5

12.0

± 0

.1 10

|F - F’| < 0.3

F = 7.5 + 0.6- 0.1

11 max.

38 max.

16 (*)

1.0 max. 1.0 max.

detail A

A

(*) distance betweenreference plane andsprocket hole

Cummulative pitch error over 20 pitches: ± 1.0direction of unreeling

1.0 max.

+ 2.0- 0.0

F’

F





|F - F’| < 0.3

F = 7.5 + 0.6- 0.1

F’

F

Ø 4.0 ± 0.2

Cummulative pitch error over 20 pitches: ± 1.0direction of unreeling

15.5

(30)

15 ± 0.2

(3.75)7.5 ± 0.4

10

0.5 ± 0.5

18.0

± 0

.5

12.0

± 0

.1

1.0 max.1.0 max. 1.0 max.1.0 max.

38 max.

0.7 ± 0.2

9.0 ± 0.511 max.

16 (*)

detail A

A


+ 2.0- 0.0

Ø 4.0 ± 0.2

(30)

15 ± 0.2

0.5 ± 0.5

18.0

± 0

.5

12.0

± 0

.1

1.3 max.1.3 max. 2.0 max.2.0 max.

37 max.

0.7 ± 0.2

9.0 ± 0.511 max.

16 (*)

detail A

A(*) distance betweenreference plane andsprocket hole

+ 2.0- 0.0




1.2. RADIAL LAQUERED FILM CAPACITORS

1.2.1. RADIAL LAQUERED STRAIGHT LEADS



Ø 4.0 ± 0.2

12.7 ± 0.2

(3.85)

(12.7)6.35 ± 0.20

18.0 ± 0.5

12.0 ± 0.1

1.0 max.1.0 max. 1.0 max.1.0 max.

32 max.

4 max.

0.7 ± 0.2

9.0 ± 0.511 max.

18

detail A

A

+ 2- 0

5 + 0.5- 0.10.5 + 1.5

- 0.0


Ø 4.0 ± 0.2

12.7 ± 0.2

(8.95)

(12.7)12.7 ± 0.4

18.0 ± 0.512.0 ± 0.1

0.5 + 1.5- 0.0 7.5 + 0.5

- 0.1

1.0 max.1.0 max. 1.0 max.1.0 max.

32 max.

0.7 ± 0.2

9.0 ± 0.511 max.

4 max.

detail A

A

18 (*)+ 2- 0







Ø 4.0 ± 0.2

12.7 ± 0.2

(7.7)

(25.4)12.7 ± 0.4

18.0 ± 0.5

6.0 ± 0.1

0.5 + 1.5- 0.0

10 + 0.5- 0.0

1.3 max.1.3 max. 2 max.2 max.

31 max.

0.5 max. 0.7 ± 0.2

9.0 ± 0.511 max.

18 (*)

detail A

+ 2- 0


A(*) distance betweenseating plane andsprocket hole

Ø 4.0 ± 0.2

1.3 max. 1.3 max. 2 max. 2 max.

12.7 ± 0.2

(7.7)

(25.4)12.7 ± 0.4

18.0 ± 0.512.0 ± 0.1

0.5 + 1.5- 0.0

10 + 0.5- 0.1


31 max.

0.7 ± 0.2

9.0 ± 0.511 max.

detail A

A

18 (*)+ 2- 0




1.2.2. RADIAL LAQUERED FILM CAPACITORS



Ø 4.0 ± 0.2

12.7 ± 0.2

(3.85)

(12.7)6.35 ± 0.20

16.0 ± 0.5 (*)

18.0 ± 0.5

12.0 ± 0.1

0.5 + 1.5- 0.0

1 max.1 max.


1 max.1 max.

32 max.

0.7 ± 0.2

9.0 ± 0.511 max.

detail A

A

5+ 0.5- 0.1

(*) distance between seatingplane and sprocket hole

Ø 4.0 ± 0.212.7 ± 0.2

18.0 ± 0.5 12.0 ± 0.1

12.7 ± 0.4 (12.7)

(8.95)

0.5+ 1.5- 0.0 7.5 + 0.5

- 0.1

1 max.1 max.


0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.5 (*)11.0 max.

32 max.

1 max.1 max.

detail A


4 max.





Ø 4.0 ± 0.212.7 ± 0.2

18.0 ± 0.5

6.0 ± 0.1

12.7 ± 0.4 (25.4)

(7.7)

0.5+ 1.5- 0.0 10.0

+ 0.5- 0.1

1.3 max.1.3 max.


0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.5 (*)11 max.

34 max.

2 max.2 max.

detail A


Ø 4.0 ± 0.212.7 ± 0.2

18.0 ± 0.5 12.0 ± 0.1

12.7 ± 0.4 (25.4)

(7.7)

0.5+ 1.5- 0.0 10.0

+ 0.5- 0.1

0.5 max.

1.3 max.1.3 max.

0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.5 (*)11 max.

34 max.

2 max.2 max.

direction of unreeling detail A




PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPE


Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.5

6.0 ± 0.1

12.7 ± 0.4 (25.4)

(5.2)

0.5 + 1.5- 0.0

15.0+ 0.5- 0.1

0.5 max.

1.3 max.1.3 max.

0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.511 max.

34 max.

2 max.2 max.


A

Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.512.0 ± 0.1

12.7 ± 0.4 (25.4)

(5.2)

0.5 + 1.5- 0.0

15.0+ 0.5- 0.1

0.5 max. 0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.511 max.

34 max.

2 max.2 max.1.3 max.1.3 max.


A



1.2.3. RADIAL LAQUERED BENT BACK LEADS

BENT BACK PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); 6 mm TAPE (original pitch = 7.5 mm)


Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.5

0.5 ± 0.5

6.0 ± 0.1

6.35 ± 0.20 (12.7)

(3.85)

5.0+ 0.6- 0.1

0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.5 (*)

4 max.

11 max.

32 max.

2.0 max.2.0 max.1.3 max.1.3 max.


detail A

A(*) distancebetween seatingplane andsprocket hole

0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.5 (*)

Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.5

12.0 ± 0.1

6.35 ± 0.20

0.5

(12.7)

+ 0.5- 0.1

+ 1.5- 0.0

5.0

(3.85)

4 max.

11 max.

32 max.

1.0 max.1.0 max.1.0 max.1.0 max.


(*) distance between seatingplane and sprockethole

detail A

A





Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.5

6.0 ± 0.1

6.35 ± 0.20 (25.4)

(3.85)

0.5+ 1.5- 0.0

0.7 ± 0.2

9.0 ± 0.5

16.0 ± 0.5 (*)5.0

4 max.

11 max.

32 max.

1.0 max.1.0 max.1.3 max.1.3 max.

+ 0.6- 0.1


detail A

A(*) distancebetween seatingplane andsprocket hole

(*) distancebetween seatingplane andsprocket hole


detail A

0.7 ± 0.2

5.0

9.0 ± 0.5

16.0 ± 0.5 (*)

Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.512.0 ± 0.1

0.5

6.35 ± 0.20

4 max.

11 max.

32 max.

1.0 max. 1.0 max.1.3 max.1.3 max.

(3.85)

(25.4)

+ 1.5-0.0

+ 0.6- 0.1

A



BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPES(original pitch = 10.0 mm)

BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE(original pitch = 10.0 mm)

12.7 ± 0.2

6.0 ± 0.1

6.0 ± 0.1

18.0 ± 0.5

12.7 ± 0.2

(8.95)

(25.4)

7.50.5

+ 0.6- 0.1+ 1.5

- 0.0

1.3 max. 1.3 max.

seating plane

Ø 4.0 ± 0.2 0.7 ± 0.2


A

(*) distance between seating plane and sprocket hole

1 max. 1 max.

11 max.

34 max.

16.0 ± 0.5 (*)

9.0 ± 0.2

12.7 ± 0.2

12.0 ± 0.118.0 ± 0.5

12.7 ± 0.2

(8.95)

(25.4)

7.50.5

+ 0.6- 0.1+ 1.5

- 0.0

Ø 4.0 ± 0.2

1.3 max. 1.3 max.

seating plane

0.7 ± 0.2


A(*) distance between seating plane and sprocket hole

1 max. 1 max.

11 max.

34 max.

16.0 ± 0.5 (*)

9.0 ± 0.2



BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H)(original pitch = 10.0 mm)

BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H); NAKED BELLY(original pitch = 10.0 mm)

18.0

± 0

.5

0.5 ± 0.5

1.0 max.1.0 max.(15)

12.0

± 0

.1

(3.75)7.5 ± 0.4

15.0 ± 0.2

F'

F

|F - F'| < 0.3

F = 7.5 + 0.6- 0.1

Ø 4.0 ± 0.2

1015.5

Cummulative pitch error over 20 pitches: ± 1.0


16.011 max.

38 max.

1.0 max.1.0 max.

+ 2.0- 0.0 (*)

9.0 ± 0.5


A

0.7 ± 0.2

detail A

12.0

± 0

.1

18.0

± 0

.5

0.5 ± 0.5

1.0 max.1.0 max.(15)

Ø 4.0 ± 0.2

15.0 ± 0.27.5 ± 0.4

(3.75)

F

F = 7.5F'

+ 0.6- 0.1

|F - F'| < 0.3

15.510



11 max.

36 max.

1.0 max.1.0 max.

16.0+ 2.0- 0.0(*)

9.0 ± 0.5

0.7 ± 0.2

detail A

A(*) distance betweenreference plane andsprocket hole



BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H); NAKED BELLY(original pitch = 15.0 mm)


12.0

± 0

.1

18.0

± 0

.5

0.5 ± 0.5

(30)1.0 max.1.0 max.

Ø 4.0 ± 0.2

15.0 ± 0.27.5 ± 0.4

(3.75)

10

15.5F

F' |F - F'| < 0.3

F = 7.5+ 0.6- 0.1



9.0 ± 0.5

16.0

11 max.

38 max.

1.0 max.1.0 max.

+ 2.0- 0.0(*)


A

detail A

0.7 ± 0.2

7.50.5

12.7 ± 0.2

(8.95)

(25.4)

+ 0.6- 0.1+ 1.5

- 0.0

12.7 ± 0.2

6.0 ± 0.1

18.0 ± 0.5

6.0 ± 0.1

39 max.

2.0 max.2.0 max.1.3 max. 1.3 max.

16.0+ 2.0- 0.0(*)

9.0 ± 0.211 max.

Ø 4.0 ± 0.2


(*) distance between seatingplane and sprocket hole

0.7 ± 0.2

detail A

A





12.7 ± 0.2

18.0 ± 0.512.0 ± 0.1

0.5

(25.4)12.7 ± 0.2

+ 0.6- 0.1+ 1.5

- 0.07.5

(8.95)0.7 ± 0.2Ø 4.0 ± 0.2

9.0 ± 0.2

16.011 max.

39 max.

2.0 max.2.0 max.1.3 max.1.3 max.

+ 2.0- 0.0(*)


A(*) distance between seatingplane and sprocket hole

detail A

F = 7.5

|F - F'| < 0.3

Ø 4.0 ± 0.2

F

F'

10

15.5

1.0 max.1.0 max.(30)

15.0 ± 0.27.5 ± 0.4

(3.75)

0.5 ± 0.5

12.0

± 0

.1

18.0

± 0

.5

+ 0.6- 0.1

Commulative pitch error over 20 pitches: ± 1.0


0.7 ± 0.2

9.0 ± 0.511 max.

16.0

38 max.

1.0 max.1.0 max.

+ 2.0- 0.0 (*)

A

detail A






0.5

1.3 max.1.3 max.(25.4)12.7 ± 0.4

12.7 ± 0.2

(5.2)

10.0

18.0 ± 0.5

6.0 ± 0.1

+ 1.5- 0.0

A

detail A

0.7 ± 0.2

2 max.2 max.

34 max.

16.0 ± 0.511 max.

9.0 ± 0.5

Ø 4.0 ± 0.20.5 max.

+ 0.5- 0.1


0.5

detail A

0.7 ± 0.2

2 max.2 max.

34 max.

16.0 ± 0.511 max.

9.0 ± 0.5

Ø 4.0 ± 0.2

12.7 ± 0.2

18.0 ± 0.512.0 ± 0.1

10.0

1.3 max.1.3 max.(25.4)12.7 ± 0.4

+ 1.5- 0.0

+ 0.5- 0.1

(5.2)


A




1.3. TAPING CHARACTERISTICS FOR RADIAL POTTED AND LACQUERED FILM CAPACITORS

RADIAL LEADS

DESCRIPTION VALUE

Pull-out force of the component ≥ 5 N

Peel-off force of adhesive tape ≥ 6 N

Tearing force of tape ≥ 15 N

Storage conditions

Storage temperature - 25 to + 40 °C

Maximum relative humidity without condensation 80 %

Commulative pitch error over 20 pitches: ± 1.0

F = 10.0

|F - F'| < 0.3

F

F'

15.0 ± 0.2(10)

10

15.5

12.0

± 0

.1

18.0

± 0

.5

4.0 ± 0.2

0.5 ± 0.5

15.0 ± 0.4(30)

1.0 max.1.0 max.

+ 0.6 - 0.1


16.0

38 max.

2.0 max.2.0 max.

+ 2.0- 0.0 (*)

9.0 ± 0.511 max.


A

0.7 ± 0.2

detail A



2. SPECIAL KINKING INFORMATION

RADIAL LACQUERED FILM CAPACITORS WITH DOUBLE KINK

General data

DOUBLE KINK CAPACITORS

The capacitors are usable for radial manual insertion on PCB. The fixation on the board by double kinked leads prevents that thecomponent jumps out of the PCB during transport.

The components with lead diameter of 0.6 mm are usable for being inserted in punched holes with nominal diameter of 0.8 mmand the components with lead diameter of 0.8 mm are usable for being inserted in punched holes with nominal diameter of 1.0 mm.

The pitch is specified on the top of the leads. After manufacturing, the products meet the specification. Although special care istaken to the packaging, deviations may occur due to transport.

PITCH(mm)

LEAD DIAMETER(mm)

10.0 ± 1.0 0.6

15.0 ± 1.0 0.8

22.5 ± 1.0 0.8

27.5 ± 1.0 0.8

1168x12(halfpage)

lt

h

l W

Ø dt> 0.5

1.6

PA A

MAGNIFIED VIEW

DIRECTION A

β β

β ≤ 15°

DOUBLE CONICAL

HOLE

≤ 15°≤ 15°



3. PACKAGING INFORMATION

3.1. LOOSE IN BOX

3.1.1. Lacquered capacitors (all pitches) and potted capacitors (pitch ≤ 15 mm: all; pitch > 15 mm: long leads)“Loose in box” capacitors are packed in carton boxes. For quantities per box see detail specifications.

3.1.2. Potted capacitors (pitch > 15 mm, short leads)“Loose in box” capacitors are packed in tray form. For quantities per box see detail specifications.

1.07 ± 0.1

10Scale ± 10/1Ø 0.6

Ø 1.00 ± 0.05

+ 0.1- 0.0Ø 0.8

1.6

Ø 1.15 ± 0.10

Ø 1.0

Scale ± 10/1

15.0/22.5/27.5

1.6

Ø 0.8

1.07 ± 0.1

Ø 1.20 ± 0.05

+ 1.0 - 0.0

Ø 1.3 ± 0.1



3.2 TAPED ON REEL

3.2.1 SMALL REELS (356 mm)/AMMOPACK

3.2.2 LARGE REELS (500 mm)/AMMOPACK

Ø 77

18

Ø 92Ø 30 Ø 356 max.

250 max.

340 max.52 max.

360

360

W + 31

Direction of unreeling

22.5

Ø 85.6

W + 10

W

Direction of unreeling

18

Ø 30

W + 16

22.5

Ø 92Ø 77Ø 85.6 Ø 500max.

470

47057 max. (6e - 9e)70 max. (11e)

W + 31

465max.

490 max.



W AS A FUNCTION OF PRODUCT HEIGHT

The cumulative pitch error is: 1.0 mm per 20 pitches.The maximum number of empty positions per reel shall not exceed 0.5 %1) of the total number of components per reel, but no more than 2consecutive positions may be vacant provided this gap is followed by 6 consecutive components.

Note1. potted: this 5 % for capacitors in ammopack (exept for capacitors with w = 2.5 or 3.5 mm and l = 7.2 mm)

lacquered for pitches 15 and 22.5 mm: 5 % for capacitors in ammopack (exept for capacitors with w = 2.5 or 3.5 mm and l = 7.2 mm)

4. LABELLING INFORMATION

2D LABEL

EXPLANATION:

h (mm) W ± 2 mm

≤ 9.0 40

10.0 up to and including 15.0 45




31.0 65

LINE

1 2D barcode and manufacturer’s logo2 Type description, Capacitance value, Tolerance Voltage Class (if applicable)3 Batch number Lot number Date code Factory code4 Quantity5 Part number SAP Number RoHs symbols S.L.: Stocking location6 Vishay Catalog Number REGION: Plant number7 Climatic category (if applicable)8 PO: Production order PI: Production item SER.N. box number

Document Number: 28147 For technical questions contact: [email protected] www.vishay.comRevision: 19-Oct-04 3

Film DielectricsUsed in Film Capacitor Products

IntroductionVishay BCcomponents

OVERVIEW

Note

1. According to “EC 60062”: KT = polyethylene terephthalate (PETP); KN = polyethylene naphtalate (PEN);KI = polyphenylene sulfide (PPS) ; KP = polypropylene (PP).

Polyethylene terephthalate (PETP) and polyethylene naphtalate (PEN) films are mostly used in general purpose capacitors.These capacitors are used in applications typically with small bias DC voltages and/or small AC voltages at low frequencies.

Polyethylene terephthalate (PETP) has, as its most important property, high capacitance per volume due to its high dielectricconstant and availability in thin gages.

Polyethylene naphtalate (PEN) is used when a higher temperature resistance is required compared to PET.

Polyphenylene sulfide (KI) film can be used in applications where high temperature is needed in combination with low dissipationfactor.

Polypropylene (KP) films are used in high frequency or high voltage applications due to their very low dissipation factor and highdielectric strength. These films are used in AC and pulse capacitors and interference suppression capacitors for mainsapplications.

Typical properties such as functions of temperature or frequency are illustrated in the following chapters: “Capacitance,””Dissipation factor,” and “Insulation resistance.”

PARAMETERDIELECTRIC(1)

UNITKT KN KI KP

Dielectric constant:

at 1 kHz 3.3 3.0 3.0 2.2 −Dissipation factor

at 1 kHz 50 40 3 1 10−4

at 10 kHz 110 − 6 2 10−4

at 100 kHz 170 − 12 2 10−4

at 1 MHz 200 − 18 4 10−4

Volume resistivity 10+17 10+17 10+17 10+18 Ωcm

Dielectric strength 400 300 250 600 V/µm

Maximum application temperature

125 125 150 105 °C

Power density:

at 10 kHz 50 40 2.5 0.6 W/cm3

Dielectric absorption 0.2 1.2 0.05 0.01 %

www.vishay.com For technical questions contact: [email protected] Document Number: 281474 Revision: 19-Oct-04

Introduction Vishay BCcomponents Film Dielectrics

Used in Film Capacitor Products

CAPACITANCE

1 kHz

-60

∆C/C

(%

)

2

0

-2

-4

4

-20 20 60 100 Tamb (°C)

KT

KN

KI

KP

KT KN

KI

KP

140

∆C/C

(%

)

1

0

-2

-3

2

-1

f (Hz)102

103

104

105

KTKNKIKP

KT

KN

KI

KP

DISSIPATION FACTOR

f (Hz)102

103

104

105

diss

ipat

ion

fact

or (

x 10

-4) 10

3

100

10 1KP

10 2

KI

KN

KT

20°C

diss

ipat

ion

fact

or (

x 10

-4)

103

100

10 1

KP

10-1

KI

KNKT

1 kHz

-60 -20 20 60 100 Tamb (°C)140

INSULATION RESISTANCE

-60 -20 20 100 140

Rin

s (M

Ω)

107

10 5

104

Tamb (°C)6010

3

106

KT

KN

KI

KP


IntroductionFilm Dielectrics

Used in Film Capacitor ProductsVishay BCcomponents

CONSTRUCTION OF THE CAPACITOR CELLThe type of electrode used determines whether the capacitoris a metallized film or film/foil type.

The electrodes used for metallized film capacitors consist ofa thin metal layer with a thickness of approximately30 to 50 nm. The electrodes of film/foil capacitors havediscrete metal foils with thicknesses of approximately5 to 10 µm.

In some programs a double side metallized plastic film isused as an electrode.

Due to their construction, film/foil capacitors can carry highercurrents than metallized ones, but are larger in volume.

Metallized capacitors have a self-healing behavior as anintrinsic characteristic.

Depending on the AC voltage, single or series constructionsare used. Single section capacitors are normally used forproducts with AC ratings up to 275 V (AC). Seriesconstructions are used for higher voltages.

GENERAL DEFINITIONS

Rated DC voltage (URdc)

The maximum DC voltage (in V) that may be continuouslyapplied to a capacitor at any operating ambient temperaturebelow the rated temperature.

Category voltage (UC)

The maximum AC voltage (or DC voltage) that may beapplied continuously to a capacitor at its upper categorytemperature.

Rated AC voltage (URac)

The maximum RMS voltage (in V) at specified frequency(mostly 50 Hz), that may be continuously applied to acapacitor at any operating ambient temperature below therated temperature.

Capacitance

The capacitance of a capacitor is the capacitive part of the equivalent circuit composed of capacitance, series resistance and inductance.

Rated capacitance

The rated capacitance, normally marked on the product, isthe value for which the capacitor has been designed.

Capacitance tolerance

The percentage of the allowed deviation of the capacitancefrom the rated capacitance is measured at a free air ambienttemperature of 23 ± 1 °C and RH of 50 ± 2%.

Tolerance coding in accordance with “IEC 60062”

A letter “A” indicates that the tolerance is defined in the type specification or customer detail specification.

Temperature coefficient and cyclic drift of capacitance

The terms characterizing these two properties apply tocapacitors for which the variations of capacitance as afunction of temperature are linear, or approximately linear,and can be expressed with a certain precision.

Temperature coefficient of capacitance

The rate of capacitance change with temperature, measuredover the specified temperature range. It is normallyexpressed in parts per million per Kelvin (10−6/K).

Temperature cyclic drift of capacitance

The maximum irreversible variation of capacitance observedat room temperature during or after the completion of anumber of specified temperature cycles. It is usuallyexpressed as a percentage of the capacitance related to areference temperature. This is normally 20 °C.

Rated voltage pulse slope (dV/dt)

The maximum voltage pulse slope that the capacitor canwithstand with a pulse voltage equal to the rated voltage. Forpulse voltages other than the rated voltage, the maximumvoltage pulse slope may be multiplied by URdc and divided bythe applied voltage.

The voltage pulse slope multiplied by the capacitance givesthe peak current for the capacitor.

Dissipation factor and equivalent series resistance

The dissipation factor or tangent of loss angle (tan δ) is thepower loss of the capacitor divided by the reactive power ofthe capacitor at a sinusoidal voltage of specified frequency.

The equivalent series resistance (ESR) is the resistive partof the equivalent circuit composed of capacitance, seriesresistance and inductance.

Insulation resistance and time constant

The insulation resistance (Rins) is defined by the applied DCvoltage divided by the leakage current after a well definedminimum time.

The time constant is the product (in seconds) of the nominalcapacitance and the insulation resistance between the leads.

Ambient temperature

The ambient temperature is the temperature of the airsurrounding the component.

Climatic category

144x12(halfpage)144x12(halfpage)

ESR

CL

PERCENTAGE OF DEVIATION

LETTER CODE

±1.0% F±2.0% G±5.0% J±10.0% K±20.0% M


Introduction Vishay BCcomponents Film Dielectrics

Used in Film Capacitor Products

The climatic category code (e.g. 50/100/56) indicates towhich climatic category a film capacitor type belongs.Thecategory is indicated by a series of three sets of digitsseparated by oblique strokes corresponding to the minimumambient temperature of operation, the maximumtemperature of operation, and the number of days ofexposure to damp heat (Steady state - test Ca) respectivelythat they will withstand.

Category temperature range

The range of ambient temperatures for which the capacitorhas been designed to operate continuously. This is definedby the temperature limits of the appropriate category.

Upper category temperature

The maximum ambient temperature for which a capacitorhas been designed to operate continuously at categoryvoltage.

Lower category temperature

The minimum ambient temperature for which a capacitor hasbeen designed to operate continuously.

Rated temperature

The maximum ambient temperature at which the ratedvoltage may be applied continuously.

Maximum application temperature

The equivalent of the upper category temperature.

Self-healing

The process by which the electrical properties of a metallizedcapacitor, after a local breakdown, are rapidly andessentially restored to the values before the breakdown.

Temperature characteristic of capacitance

The term characterizing this property applies mainly tocapacitors for which the variations of capacitance as afunction of temperature (linear or non-linear) cannot beexpressed with precision and certainty.

The temperature characteristic of capacitance is themaximum reversible variation of capacitance, produced overa given temperature range within the category temperaturerange.

It is expressed normally as a percentage of the capacitance related to a reference temperature of 20 °C.

Storage temperature

The temperature range with relative humidity (RH) ofmaximum 80% without condensation at which the initialcharacteristics can be guaranteed for at least 2 years.

Maximum power dissipation

The power dissipated by a capacitor is a function of thevoltage (Uesr) across or the current (I) through the equivalentseries resistance ESR and is expressed by:

Maximum power dissipation (continued)

Given that for film capacitors theformula can be simplified to:

or with

the formula becomes:

For the tan δ we take the typical value found in thespecification, C is in farads and . U or I are assumedto be known.

In applications where sinewaves occur, we have to take forU the RMS-voltage or for I the RMS-current of the sinewave.

In applications where periodic signals occur, the signal hasto be expressed in Fourier terms:

with U0 the DC voltage, Uk and Ik (the voltage and current ofthe k-th harmonic respectively) the formula for the dissipatedpower becomes:

and tan δk is the tan δ at the k-th harmonic.

PUesr

2

ESR--------------=

P ESR I2×=

144x12(halfpage)144x12(halfpage) ESRC

U

I

Uesr

Uesr2 ESR2

ESR2 1 ω2C2⁄+-------------------------------------------- U2×=

δtan ω C ESR 0.1«××=

Uesr2 ESR2 ω2 C2 U2×××=

ESR δ ωC⁄tan=

P ω C×= δ U2×tan×

P δtanω C×-------------- I2×=

ω 2π f=

U U0 Uk kω t Φk+( )sin×k 1=

∞

∑+=

I Ik kω t Φk+( )sin×k 1=

∞

∑=

P k ω C× δk

Uk2

2-------×tan××

k 1=

∞

∑=

Pδktan Ik

2×2 k× ω× C×---------------------------------

k 1=

∞

∑=


IntroductionFilm Dielectrics

Used in Film Capacitor ProductsVishay BCcomponents

TEST INFORMATIONRobustness of leads

Tensile strength of leads (Ua) (load in lead axis direction)

Lead diameter 0.5, 0.6 and 0.8 mm: load 10 N, 10 s.

Bending (Ub)

Lead diameter 0.5, 0.6 and 0.8 mm: load 5 N, 4 x 90°.

Lead diameter 1.0 mm: load 10 N, 4 x 90°.

Torsion (Uc) (for axial capacitors only)

Severity 1: three rotations of 360°.

Severity 2: two rotations of 180°.

Rapid change of temperature (Na)

The rapid change of temperature test is intended todetermine the effect on capacitors of a succession oftemperature changes and consists of 5 cycles of 30 minutesat lower category temperature and 30 minutes at highercategory temperature.

Dry heat (Ba)

This test determines the ability of the capacitors to be usedor stored at high temperature. The standard test is 16 hoursat upper category temperature.

Damp heat cyclic (Db)

This test determines the suitability of capacitors for use andstorage under conditions of high humidity when combinedwith cyclic temperature changes and, in general, producingcondensation on the surface of the capacitor.

One cycle consists of 24 hours exposure to 55 °C and95 to 100% RH.

Cold (Aa)

This test determines the ability of the capacitors to be usedor stored at low temperature. The standard test is 2 hours atthe lower category temperature.

Damp heat steady state (Ca)

This test determines the suitability of capacitors for use andstorage under conditions of high humidity. The test is primarily intended to permit observation of theeffects of high humidity at constant temperature over aspecified period.

The capacitors are exposed to a damp heat environment,which is maintained at a temperature of 40 °C and an RH of90 to 95% for the number of days specified by the third set ofdigits of the climatic category code.

Soldering conditions

With regard to the resistance to soldering heat and thesolderability, our products comply with “IEC 60384-1” andthe additional type specifications.

For our precision capacitors where capacitance stability isimportant, we refer to the paragraph “Soldering conditions” inthe type specification.

In the tables “Quick reference test requirements” anoverview is given for the various soldering parameters perproduct type.

Solvent resistance of components

Soldered capacitors may be cleaned using appropriatecleansing agents, such as alcohol, fluorhydro-carbons ortheir mixtures. Solvents or cleansing agents based onchlorohydrocarbons or ketones should not to be used, asthey may attack the capacitor or the encapsulation.

After cleaning it is always recommended to dry thecomponents carefully.


CapabilitiesVishay BCcomponents

Film Capacitors

CAPABILITIES

“Vishay-BCcomponents” gives an extensive overview of all preferred code numbers available for film capacitors.

Due to our technical capabilities we can offer at short notice on request the following deviating products.

Overview

AVAILABLE ON REQUEST DESCRIPTION SERIES

Intermediate C-values E24 series with ±5% tolerance MKT 303/304

MKT 365/366/367

MKT 467/468/469

MKT/MKT 468

MKT 370/371/372/373

E12 series with ±10% toleranceInterference suppression

E24 series with ±5% tolerance

E48 series with ±1% or ±2% toleranceKP 460 to 464

E96 series with ±1% tolerance

E96 series with ±2% tolerance MKP 416 to 420

Asymmetrical tolerances All series

Other lead lengths for loose products All series

Small reels for <250 pcs All radial series


Special Lead ConfigurationVishay BCcomponents

Radial Lacquered Film Capacitors

BENDING BACK OR BENDING OUT CAPABILITIES FOR RADIAL LACQUERED FILM CAPACITORS.

BENDING CAPABILITIES

MAX. BODY SIZE ORIGINAL PITCH BENT BACK PITCH BENT OUT PITCH PACKING

bending shape (see Fig.a)

10.0 mm 7.5 mm 5.0 mm − loose in box;ammopack, taped on reel

30.0 mm 27.5 mm 22.5 mm − loose in box

bending shape (see Fig.b)

7.3 mm 5.0 mm − 7.5 mm loose in box

− 10.0 mm loose in box

10.0 mm 7.5 mm − 10.0 mm loose in box

− 15.0 mm loose in box

14.0 mm 10.0 mm 7.5 mm 15.0 mm loose in box


10.0 mm 22.5 mm loose in box


20.0 mm 27.5 mm loose in box

30.0 mm 27.5 mm 20.0 mm − loose in box

bending shape (see Fig.c)

14.0 mm 10.0 mm 5.0 mm − taped on reel

7.5 mm − taped on reel

18.5 mm 15.0 mm 7.5 mm − loose in box; taped on reel

10.0 mm − loose in box

93X12(2_column)

93X12(2_column)

93X12(2_column)

a. b. c.


Special Lead ConfigurationRadial Lacquered Film Capacitors Vishay BCcomponents

RADIAL LACQUERED FILM CAPACITORS WITH DOUBLE KINK

GENERAL DATA

DOUBLE KINK CAPACITORS

The capacitors are suitable for radial manual insertion on PCB boards. The fixation on the board by double kinked leads preventsthe component from jumping out of the PCB during transport.

Components with lead diameters of 0.6 mm are suitable for insertion in punched holes with a nominal diameter of 0.8 mm.Components with lead diameters of 0.8 mm are suitable for insertion in punched holes with a nominal diameter of 1.0 mm

The pitch is specified on the top of the leads. After manufacturing, the products meet the specification.Although special care is taken during packaging, deviations may occur due to transport.

PITCH(mm)

LEAD DIAMETER(mm)

10.0 ±1.0 0.6

15.0 ±1.0 0.8

22.5 ±1.0 0.8

27.5 ±1.0 0.8

296x12(full_width)

βϒ

lt

h

l b

Ødt>0.5

1.6

double conical hole

PA

magnified view direction A

A

βϒ

β ≤ 15°


Special Lead ConfigurationVishay BCcomponents Radial Lacquered Film Capacitors

DETAIL OF LOCK LEAD

10

1.6

Ø1.15 ±0.10

Ø0.8 +0.1-0.0

Ø1.00±0.05

Ø0.6 Scale ± 10/1

1.07 ±0.1

296x12(full_width)

Scale ± 10/1

15.0/22.5/27.5Ø 0.8

Ø1.3 ±0.1

Ø1.0+0.1-0.0

Ø1.20 ±0.05

1.07±0.11.6


Selection GuideVishay BCcomponents

Film Capacitors

Maximumoperating temp.

100 °C

YOURAPPLICATION


105 °C

Partiallydipped

low productheight

KT 347100 V - 630 V10 - 22.5 mm

MKT 365-36763 V - 400 V5 - 7.5 mm

MKT 467-469MKT/MKT 468100 V - 1000 V7.5 - 27.5 mm

MKT 370-37363 V - 630 V5 - 27.5 mm

GENERALELECTRONICS

Telecommunication

MKT 303/304250 V - 630 V7.5 - 27.5 mm

Dipped

High dv/dt

Dipped Boxed


105 °C


105 °C

GENERALELECTRONICS

303 / 304312313314338 1338 4338 6339365-367370-373375383385386405416 - 417 - 418 - 419 - 420422 - 422 mini467 - 468 - 469471

1813182018301839171017731778-31840M1841 / 1841M1845

V I S h Ay I N T E R T E C h N o L o G y, I N C .

FILM CAPACITOrS

w w w . v i s h a y . c o m

SE

LE

CT

oR

GU

IdE

CA

PA

CIT

oR

S

Film Capacitors

rFI AC & Pulse Precision CDI

Series 339 1778-3 / (338 4) 1773 338 1 338 6 1710 405 1840M 385 1841 / 1841M 383 1830 375 1839 1845 386416-417-418

419-420422-422 mini 1830 1839 313 314

Applicationsx2 filtering of the mains (230 Vac)

x2 filtering of the mains (230 Vac)


x1 filtering between the lines of a three

phase mains

y2 filtering between line and earth

y2/x1 filtering Automotive RFI filter,

capacitor varistor combination

high-voltage and high-frequency

applications


applications


applications


applications, snubber and resonant cap


applications


applications, unlimited dV/dt, flyback


applications


applicationsSnubber applications

Telecom and AdSL filtering applications



applications


applications

Ignition system for 2 wheelers


Market Segments

Lighting • • • • • • • • • • •

Power Supplies • • • • • • • • • • • • • • • • •

Automotive • • • • •

Telecom • • • • • • • • •

White goods • • • • • • •

Consumer

Max. Temperature 110 °C 100 °C (105 °C) 100 °C 105 °C 105 °C 100 °C 105 °C 100 °C 125 °C 100 °C 105 °C 100 °C 105 °C 100 °C 100 °C 85 °C 85 °C 85 °C 100 °C 100 °C 85 °C 85 °C

Tolerance 20 %, 10 % 20 %, 10 % 20 %, 10 % ±20 %, ±10 %, ±5 % ±20 %, ±10 %, ±5 % 20 %, 10 % 10 % 2.5 %, 5 %, 10 % 2 %, 5 % 5 %, 10 % 1 %, 2 %, 5 %1 %, 2.5 %, 5 %, 10 %

3.5 %, 5 %1 %, 2.5 %, 5 %, 10 %

5 %, 10 %, 20 % 5 %, 10 % 2 %, 5 % 2 %, 5 %1 %, 2.5 %, 5 %, 10 %

1 %, 2.5 %, 5 %, 10 %

10 % 10 %

Technology MKP MKP MKT MKP MKP MKT MKT + varistor MKP MKP MMKP MMKP KP KP/MKP MKP MKP MMKP MKP MKP KP MKP MKP MKT

version Radial boxed Radial boxed Axial Radial boxed Radial boxed Radial boxedRadial boxed /

radial lacqueredRadial boxed Radial boxed Radial boxed Radial boxed Radial boxed Radial boxed Axial Axial Radial boxed Radial boxed Radial boxed Radial boxed Axial Radial lacquered Radial lacquered

voltage 275 Vac (x2) 305 Vac (x2) 253 Vac (x2) 440 Vac (x1) 300 Vac (y2) 305 Vac (y2/x1) 18 - 42 Vdc 250 - 2000 Vdc 1600 - 2000 Vdc 160 - 2000Vdc 250 - 2500 Vdc 63 - 630 Vdc 630 - 2500 Vdc 160 - 800 Vdc 160 - 2000V dc 630 - 2500Vdc 63 - 630 Vdc 630 Vdc 63 - 630 Vdc 160 - 800 Vdc 250- 400 Vdc 250- 400 Vdc

Pulse Slope (dv/dt) 100 V/µs 100 - 200 V/µs 100 - 200 V/µs 100 - 250 V/µs 100 V/µs 100 - 200 V/µs 50 V/µs 30 - 4100 V/µs 2000 - 4000 V/µs 130 - 20000 V/µs 130 - 20000 V/µs 1000 V/µs 1900 - 30000 V/µs 30 - 700 V/µs 140 - 6200 V/µs 75 - 5500 V/µs 20-50 V/µs 50 V/µs 1000 V/µs 30 - 700 V/µs 100 V/µs 10 V/µs

Capacitance/Pitch

1- 68 nF: 7.5 mm 1- 100 nF: 10 mm 10- 680 nF: 15 mm 0.12- 1.5 µF: 22.5 mm0.47- 4.7 µF: 27.5 mm

10- 100 nF: 10 mm 10- 470 nF: 15 mm 0.15- 1 µF: 22.5 mm0.47- 3.3 µF: 27.5 mm 2.2- 10 µF: 37.5 mm 6.8- 10 µF: 55 mm

10 nF - 2.2 µF

10- 100 nF: 7.5 mm (bent back)

10- 100 nF: 15 mm0.1- 0.22 µF: 22.5 mm

0.22- 1 µF: 27.5 mm

1- 56 nF: 7.5 mm 1- 10 nF: 10 mm

6.8- 56 nF: 15 mm 47- 150 nF: 22.5 mm180- 470 nF: 27.5 mm

1- 10 nF: 10 mm 1- 22 nF: 15 mm 27- 68 nF: 22.5 mm82- 100 nF: 27.5 mm

10 nF - 1.0 µF1000 pF - 6.8 µF

5 - 37.5 mm680 pF - 0.033 µF

10 - 15 mm470 pF - 6.8 µF7.5 - 37.5 mm

680 pF - 2.7 µF15 - 27.5 mm

100 pF - 0.033 µF5 mm

100 pF - 0.27 µF10 - 27.5 mm

1000 pF - 10 µF 1000 pF - 4.7 µF 0.1 µF - 4.7 µF 1 nF - 1.1 µF1 - 47 nF

Withstand surge voltage up to 1.5 kV

100 pF - 0.033 µF 5 mm

220 pF - 10.0 µF 0.47 - 2.2 µF27.5 mm

0.47 - 2.2 µF22.5 - 27.5 mm

Technical Information

Approvals: ENEC, UL1414,

UL1283, CSA No.1, CSA No.8, CQC


UL1283, CSA No.1, CSA No.8

Approvals: ENEC, UL1283


UL1283, CSA No.8


UL1283, CSA No.1


UL1283, CSA No.1Small dimensions

Special tab terminals


Series 339 1778-3 / (338 4) 1773 338 1 338 6 1710 405 1840M 385 1841 / 1841M 383 1830 375 1839 1845 386416-417-418

419-420422-422 mini 1830 1839 313 314





phase mains





applications


applications


applications




applications




applications






applications


applications



Market Segments

Lighting • • • • • • • • • • •

Power Supplies • • • • • • • • • • • • • • • • •


Telecom • • • • • • • • •


Consumer


Tolerance 20 %, 10 % 20 %, 10 % 20 %, 10 % ±20 %, ±10 %, ±5 % ±20 %, ±10 %, ±5 % 20 %, 10 % 10 % 2.5 %, 5 %, 10 % 2 %, 5 % 5 %, 10 % 1 %, 2 %, 5 %1 %, 2.5 %, 5 %, 10 %

3.5 %, 5 %1 %, 2.5 %, 5 %, 10 %

5 %, 10 %, 20 % 5 %, 10 % 2 %, 5 % 2 %, 5 %1 %, 2.5 %, 5 %, 10 %

1 %, 2.5 %, 5 %, 10 %

10 % 10 %






Capacitance/Pitch



10 nF - 2.2 µF


10- 100 nF: 15 mm0.1- 0.22 µF: 22.5 mm

0.22- 1 µF: 27.5 mm

1- 56 nF: 7.5 mm 1- 10 nF: 10 mm

6.8- 56 nF: 15 mm 47- 150 nF: 22.5 mm180- 470 nF: 27.5 mm


10 nF - 1.0 µF1000 pF - 6.8 µF

5 - 37.5 mm680 pF - 0.033 µF

10 - 15 mm470 pF - 6.8 µF7.5 - 37.5 mm

680 pF - 2.7 µF15 - 27.5 mm

100 pF - 0.033 µF5 mm

100 pF - 0.27 µF10 - 27.5 mm



100 pF - 0.033 µF 5 mm

220 pF - 10.0 µF 0.47 - 2.2 µF27.5 mm

0.47 - 2.2 µF22.5 - 27.5 mm








UL1283, CSA No.8


UL1283, CSA No.1





Series 339 1778-3 / (338 4) 1773 338 1 338 6 1710 405 1840M 385 1841 / 1841M 383 1830 375 1839 1845 386416-417-418

419-420422-422 mini 1830 1839 313 314





phase mains





applications


applications


applications




applications




applications






applications


applications



Market Segments

Lighting • • • • • • • • • • •

Power Supplies • • • • • • • • • • • • • • • • •


Telecom • • • • • • • • •


Consumer


Tolerance 20 %, 10 % 20 %, 10 % 20 %, 10 % ±20 %, ±10 %, ±5 % ±20 %, ±10 %, ±5 % 20 %, 10 % 10 % 2.5 %, 5 %, 10 % 2 %, 5 % 5 %, 10 % 1 %, 2 %, 5 %1 %, 2.5 %, 5 %, 10 %

3.5 %, 5 %1 %, 2.5 %, 5 %, 10 %

5 %, 10 %, 20 % 5 %, 10 % 2 %, 5 % 2 %, 5 %1 %, 2.5 %, 5 %, 10 %

1 %, 2.5 %, 5 %, 10 %

10 % 10 %






Capacitance/Pitch



10 nF - 2.2 µF


10- 100 nF: 15 mm0.1- 0.22 µF: 22.5 mm

0.22- 1 µF: 27.5 mm

1- 56 nF: 7.5 mm 1- 10 nF: 10 mm

6.8- 56 nF: 15 mm 47- 150 nF: 22.5 mm180- 470 nF: 27.5 mm


10 nF - 1.0 µF1000 pF - 6.8 µF

5 - 37.5 mm680 pF - 0.033 µF

10 - 15 mm470 pF - 6.8 µF7.5 - 37.5 mm

680 pF - 2.7 µF15 - 27.5 mm

100 pF - 0.033 µF5 mm

100 pF - 0.27 µF10 - 27.5 mm



100 pF - 0.033 µF 5 mm

220 pF - 10.0 µF 0.47 - 2.2 µF27.5 mm

0.47 - 2.2 µF22.5 - 27.5 mm








UL1283, CSA No.8


UL1283, CSA No.1




NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay’s terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.

Film Capacitors

DC Applications

370-373 1820 365-367 467-468-469 303 / 304 1813 471 312

General applications

General applications, high

temperature, automotive



General applications,

minimal building height


CFL applications, high temperature

Ignition cap., xenon lamp,

high temperature

• • • • • • •

• • • • •

• • • • • •

• • • • •

• • • • •

100 °C / 105 °C 125 ºC 105 °C 105 °C 105 °C 100 °C 150 °C 175 ºC

5 %, 10 % 5 %, 10 % 5 %, 10 % 5 %, 10 % 5 %, 10 % 5 %, 10 % 5 %, 10 % 5 %, 10 %

MKT MKT MKT MKT MKT MKT MKN MKN

Radial boxed Radial boxed Radial lacquered Radial lacqueredRadial lacquered,

naked bellyAxial Radial lacquered

Radial lacquered, naked belly

63 - 630 Vdc 63 - 1000 Vdc 63 - 400 Vdc 100 - 1000 Vdc 250 - 630 Vdc 63 - 1000 Vdc 700 - 1000 Vdc 1000 Vdc

4 - 630 V/µs 2.5 -130 V/µs 110 - 170 V/µs 10 - 170 V/µs 2 -18 V/µs 2 - 175 V/µs 100 V/µs 6000 V/µs

1 nF - 15 µF5 - 27.5 mm

1 nF - 15 µF5 - 37.5 mm

3.3 nF - 1 µF5 - 7.5 mm

1 nF - 10 µF7.5 - 27.5 mm

0.01 - 10 µF7.5 - 27.5 mm

470 pF - 22 µF2.2 - 8.2 nF

5 mm1 nF - 1 µF

Low building height

w w w . v i s h a y . c o mVMN-SG0042-0804

One of the World’s Largest

of Discrete Semiconductors and Passive ComponentsManufacturers

Wo

RL

dW

IdE

SA

LE

S C

oN

TAC

TS ThE AMErICAS

uNITED STATESVIShAy AMERICAS oNE GREENWICh PLACE ShELToN, CT 06484 UNITEd STATES Ph: +1-402-563-6866 FAx: +1-402-563-6296

ASIA

SINgAPOrEVIShAy INTERTEChNoLoGy ASIA PTE LTd.25 TAMPINES STREET 92 KEPPEL BUILdING #02-00 SINGAPoRE 528877 Ph: +65-6788-6668 FAx: +65-6788-0988

P.r. ChINAVIShAy TRAdING (ShANGhAI) Co., LTd.15d, SUN ToNG INFoPoRT PLAzA55 hUAI hAI WEST RoAdShANGhAI 200030 P.R. ChINAPh: +86-21-5258 5000FAx: +86-21-5258 7979

jAPANVIShAy JAPAN Co., LTd.MG IKENohATA BLdG. 4F 1-2-18, IKENohATA TAITo-KU ToKyo 110-0008 JAPAN Ph: +81-3-5832-6210 FAx: +81-3-5832-6260

EurOPE

gErMANyVIShAy EURoPE SALES GMBhGEhEIMRAT-RoSENThAL-STR. 100 95100 SELB GERMANy Ph: +49-9287-71-0 FAx: +49-9287-70435 FrANCEVIShAy S.A.199, BLVd dE LA MAdELEINE 06003 NICE, CEdEx 1 FRANCE Ph: +33-4-9337-2920 FAx: +33-4-9337-2997 uNITED kINgDOMVIShAy LTd.PALLIoN INdUSTRIAL ESTATE SUNdERLANd SR4 6SU UNITEd KINGdoM Ph: +44-191-514-4155 FAx: +44-191-567-8262

SEMICONDuCTOrS: Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • Zener and Suppressor Diodes • FETs • RF Transistors • Optoelectronics • ICs • Modules and Assemblies

PASSIvE COMPONENTS:Resistive Products • Magnetics • Capacitors • Strain Gage Transducers and Stress Analysis Systems

V I S H Ay I N T E R T E C H N o L o G y, I N C .

LIghTINgAPPLICATIONSFi lm Capacitors

CA

PA

BIL

ITIE

S


CA

PA

CIT

oR

S

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

Film CapacitorsLightingApplications

CFL

Electronic Ballast (Europe)

HID Lamp Automotive

Lamp Dimmer

Electronic Ballast (USA)

HID Lamp Consumer

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

key function Series rangeCapacitance version

C2-C3 Half bridge 467/468 18 – 150 nF Lacquered

4719 18 – 150 nF Lacquered

C4 Lamp capacitor 365/366/367 1,0 – 10 nF Lacquered

3659/3679 1,0 – 10 nF Lacquered

4719 1,0 – 10 nF Lacquered


C1 EMI X2 339/1778 10 – 470 nF Boxed

C2-C3 EMI y2 338.6/1710 2.2 – 8.2 nF Boxed

C4 Decoupling 468/479 100nF – 1.2 µF Lacquered

C6-C7 Half bridge 303/304/468 100 – 470 nF Half lacquered / lacquered

C10 Blocking 479/383/1841M 15 – 220 nF Lacquered / boxed

C11 Striking / lamp cap. 383/385 2.2 – 10 nF Boxed


C1 EMI X2 339/1778 10 – 470 nF Boxed

C2-C3 EMI y2 338.6/1710 2.2 – 8.2 nF Boxed

C4 Decoupling 468/479 100nF – 1.2 µF Lacquered

C6-C7 Half bridge 303/304/468 100 – 470 nF Half lacquered / lacquered

C8-C9 Resonant cap. 383/385 1,0 – 10 nF Boxed


C1/C2 Resonant cap. 383/1841M 47 – 150 nF Boxed


C1 Ignition cap. 312 70 – 120 nF Customised

C2/C3 Half bridge 373/1820 220 – 1000 nF Boxed / customised


C1 Timer 467/468/373 22 – 220 nF Lacquered / boxed

C2 Interference suppression 467/468/373 22 – 220 nF Lacquered / boxed

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

voltagerange Temperaturerange(°C) Tolerance(%) features 365Series

250 Vdc - 55 to 105 10 • Excellent healing

250 Vdc - 55 to 150 10 • High temperature PEN-dielectric

400/630 Vdc - 55 to 105 10 • Extended range

700 Vdc - 55 to 105 10 • Serie-construction

700 Vdc - 55 to 150 10 • High temperature PEN-dielectric

voltagerange Temperaturerange(°C) Tolerance(%) features 303-304Series

275Vac/305 Vac - 55 to 105 20/10 • Smallest dimensions

300Vac/305 Vac - 55 to 105 20/10 • Broad range

400/630 Vdc - 55 to 105 10/5 • Long life

400 Vdc - 55 to 105 20/10 • Slim design

400/630 Vdc - 55 to 105 5 • Low dissipation factor

1000/1400/1600 Vdc - 55 to 105 5 • High pulse load capability

voltagerange Temperaturerange(°C) Tolerance(%) features 339/1778Series

275Vac/305 Vac - 55 to 105 20/10 • Smallest dimensions

300Vac/305 Vac - 55 to 105 20/10 • Broad range

400/630 Vdc - 55 to 105 10/5 • Long life, extended range

400 Vdc - 55 to 105 20/10 • Excellent healing

1600-2000 Vdc - 55 to 105 5 • High pulse load capability


400-1400 Vdc - 55 to 105 5 • High pulse load capability


1000 Vdc - 55 to 170 10 • PEN-dielectric, excellent dv/dt

400 Vdc - 55 to 125 10/5 • High performing DC-cap


250 Vdc - 55 to 105 10 • Long life, excellent stability

630 Vdc - 55 to 105 10 • Good surge voltage handling

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay’s terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.

Film CapacitorsLightingApplications

Vishay offers to design engineers a wide range of high-quality film capacitors for all kinds of lighting applications, including HF ballasts, compact fluorescent lamps, high-intensity discharge lamps, and igniter units for high-pressure lamps. The Vishay product portfolio includes capacitors based on polyester, polypropylene, and high-temperature PEN dielectrics.

The new Vishay BCcomponents MKP 339 series of X2 RFI capacitors features capacitance values from 0.001 µF to 4.7 µF. Quality and reliability approvals include IEC 60384-14 2nd edition and EN 132400, UL, CSA, and CQC. Available capacitance tolerances are ±20% and ±10%. MKP 339 capacitors are offered in case sizes that are smaller than those previously available. In addition, the height profile of products with C-values greater than 100 nF is reduced by 1 mm to 2 mm. As a result, the capacitors are especially useful in applications where board space is limited and mounting height is restricted.

The boxed MMKP 383 series capacitors are based on a double metallized electrode design that utilizes a polypropylene dielectric and meets performance grade 1 (long life standards). These devices are very well suited for electronic lighting ballasts and resonance applications. Features include a capacitance range from 470 pF to 2.7 µF, high pulse load, and high current capabilities with rated voltages up to 2500 Vdc and 900 Vac respectively. The small dimensions and low-profile design of the capacitors make them ideal for electronic ballast applications. MMKP 383 capacitors are available in loose packaging or tape-on-reel in 15 mm, 22.5 mm, and 27.5 mm, as well as 7.5-mm bent back pitch.

In new automotive lighting systems, xenon HID lamps are used to provide enhanced driver safety and comfort. Vishay’s MKN 312 capacitors have the specifications needed to activate xenon bulbs, including capacitance value from 70 nF to 120 nF, rated voltage of 800 Vdc, and pulse load of 25000 V/µs, and operate reliably in high-temperatures up to 150 °C. The capacitors are based on the new PEN film technology that enables exceptional performance at high temperatures.

Increasing emphasis on caring for the environment and reducing energy consumption has resulted in increased usage of compact florescent lamps (CFLs). Vishay offers a dedicated range of MKT 365-367 film capacitors for use in standard CFLs. For high-performance CFLs, Vishay offers the MKN 4719 series of capacitors, which is suitable for usage at temperatures above 125 °C.

Many Vishay products are designed to fulfill the RoHS directives issued by the European Union (Directive 2002/95/EC). The products described in this brochure are completely RoHS-compliant and suitable for usage in lead (Pb)-free soldering processes.

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

OneoftheWorld’sLargest

ofDiscreteSemiconductorsandPassiveComponentsManufacturers


Wo

RL

DW

IDE

SA

LE

S C

oN

TAC

TS ThEAMErICAS

uNITEDSTATESVISHAy AMERICAS oNE GREENWICH PLACE SHELToN, CT 06484 UNITED STATES PH: +1-402-563-6866 FAX: +1-402-563-6296

ASIA

SINgAPOrEVISHAy INTERTECHNoLoGy ASIA PTE LTD.25 TAMPINES STREET 92 KEPPEL BUILDING #02-00 SINGAPoRE 528877 PH: +65-6788-6668 FAX: +65-6788-0988

P.r.ChINAVISHAy TRADING (SHANGHAI) Co., LTD.15D, SUN ToNG INFoPoRT PLAzA55 HUAI HAI WEST RoADSHANGHAI 200030 P.R. CHINAPH: +86-21-5258 5000FAX: +86-21-5258 7979

jAPANVISHAy jAPAN Co., LTD.MG IKENoHATA BLDG. 4F 1-2-18, IKENoHATA TAITo-KU ToKyo 110-0008 jAPAN PH: +81-3-5832-6210 FAX: +81-3-5832-6260

EurOPE

gErMANyVISHAy EURoPE SALES GMBHGEHEIMRAT-RoSENTHAL-STR. 100 95100 SELB GERMANy PH: +49-9287-71-0 FAX: +49-9287-70435 frANCEVISHAy S.A.199, BLVD DE LA MADELEINE06003 NICE, CEDEX 1 FRANCE PH: +33-4-9337-2920 FAX: +33-4-9337-2997 uNITEDkINgDOMVISHAy LTD.PALLIoN INDUSTRIAL ESTATE SUNDERLAND SR4 6SU UNITED KINGDoM PH: +44-191-514-4155 FAX: +44-191-567-8262

SEMICONDuCTOrS:Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • zener and Suppressor Diodes • FETs • RF Transistors • optoelectronics • ICs • Modules and Assemblies

PASSIvECOMPONENTS:Resistive Products • Magnetics • Capacitors • Strain Gage Transducers and Stress Analysis Systems

VMN-PL0003-0711

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

TRIM HERE

Documents

Vishay BCcomponents Metallized Polyester Film Capacitors MKT … · 2010. 4. 2. · Document Number: 28106 For technical questi ons contact: filmcaps [email protected] Revision: