ANYWELDwww.img-us.com

PAUT and TOFD Weld Inspection Solution

PRODUCT CONCEPT

ANYWELDANYWELDMotorized One Axis Weld ScannerMotorized One Axis Weld Scanner

A Truly Modular and Affordable Solution for any PAUT and TOFD Weld InspectionA Truly Modular and Affordable Solution for any PAUT and TOFD Weld Inspection

Modular and Affordable

Anyweld is a magnetic wheeled scanner designed for almost any type of one line inspection of welds. Its design allows a self aligned scan on circumferential welds of pipes from 4" OD up to flat, but can be used on longitudinal welds as well. The scanner can also be used on non magnetic materials with the optional bearing chains and is equipped with IP68, self powered laser liner for maximum scan tracking reliability.

ANYWELDwww.img-us.com

PAUT and TOFD Weld Inspection Solution

A truly modular and affordable solution for anyPAUT and TOFD Weld Inspection

In the pressure equipment manufacturing branch the demand on Automated Ultrasonic Inspection (AUT), Phased Array and/or TOFD solutions is steadily increasing and replacing usual radiographic examination.

Anyweld has been designed to be very compact, robust and adaptive. It can carry from 1 PA probe, with minimized encumbrance, up to 8 probes (10 with dual TOFD IMG probes and wedges).

IMG proprietary design of magnetic wheels provide for unprecedented attractive force and ensure proper traction. The use of the scanner on non magnetic materials is ensured by adding bearing chain, which can also be used for better scan alignment on magnetic materials.

Anyweld embedded or external battery operated electronics, guarantees constant traction and speed control in any position. Speed is step programmable from 2 mm/s to 100 mm/s. Remote control can be wired or wireless (optional).12V auxiliary output is available for external water feeding pumps with on-off commands on the remote control. The scanner can be assembled in at least 14 different configurations

Anyweld used on AUT validation on 10.75" CRA weld; scanner running on one side of the weld joint

Anyweld used on longitudinal weld inspection.

Industry Demand:

IMG Solution:

ANYWELDwww.img-us.com

PAUT and TOFD Weld Inspection Solution

Key Features Diameter Range: 100 mm up to flat Scanner encumbrance: 170 (l) x 106 (w) x 90 (h) Speed adjustment: 12 steps from 2 to 100 mm/s Weight: from 3 to 6 kg according to probes. Up to 8 independent gimbal gimbal spring

loaded probe holders Waterproof and powered led liner with

magnetic on off switch Fast lock fork pin release, dual bearing

attachment Rugged construction for harsh environment

Zipper tube cable organizer for easy umbilical cable opening and replacement

Cable length and zipper tube standard 5 meters, custom length available

Very strong magnetic wheels Bearings chains for scanning on non magnetic

materials

• PAUT and TOFD • Circumferential or longitudinal • Motorized, One Axis• Compatible with any AUT flaw detector• Magnetic or non magnetic materials

• Holds up to 8 probes (10 with dual TOFD IMG wedges)• Programmable Speed • Remote control (wired or wireless)• Up to 14 different configurations

Anyweld has a laser guide for accurate positioning, saving time in inspection.

Main Applications and Use:

Anyweld in 1 PA probe, minimal encumbrance configuration: can scan with 100 mm straight pipe.

IMG watertight Laser liner with direct power supply and magnetic ON/OFF switch.

IMG Dual TOFD wedge for specific customer designed PCSs.

ANYWELDwww.img-us.com

PAUT and TOFD Weld Inspection Solution

Scanner Kit Anyweld main frame with single bar attachment and motor 1 probeholder bar 2 springloaded probe holders 2 forks with different arms length Motor control with 14.4 V Li-Ion Battery 1 Encoder cable (specify AUT flaw detector) 1 easy setup organizer 1 Run off rubber mat Rugged explorer case

Optional Accessories Full range of IMG TOFD probes and wedges Full range of IMG Phased Array probes and

wedges Electric pump with reservoir Spring loaded probeholders

Zipper tube cable organizer Wireless scanner and pump remote control Dual Bar attachment with diameter adjustment External Battery in sealed field case Over the weld configuration attachment

The power unit provides a direct hi resolution encoder output which can be wired to match any AUT flaw detector such as Sonatest (Veo and Prisma), AGR, Zetec, Olympus or any other equipment with encoder input.

Product specification may change without notice.