Embed Size (px)
Citation preview
Course Descriptions for Mechatronics engineering department:
University requirements 24 c.h Mandatory 18 c.h. :
Course Code: 15200106 Title: English 1
Credits: (3, 0 ,3) 3 C.HPrerequisite:
Course Description:
To develop the student for languages skills. It concentrates on vocabulary expressions and grammatical structures. In order to be able to use English as easy as possible with accuracy and confidence.
Books
Course Code: 15200103 Title: Communication Skills
Credits: )2 ,0 ,2 (2 C.HPrerequisite:
Course Description:
This course aims at providing students with the basic of communication process the different definition of communication skills , elements of communication process, factors affecting communication process , types of communication , principles of good communication process , purposes of communication process , barriers of communication process , methods of effective communication process , access communication, how to write a C.V., how to manage a formal meeting , time management , how to write a respond to sales-letters, and case studies in the field , interviews.
Books
Course Code: 15020101 Title: Computer skills applications
Credits: )2 ,3, 3 (3 C.H.Prerequisite:
Course Description:
Introduction to Computer, hard ware and software, number systems (binary, decimal, hexadecimal), input units, output units ,dos commands, introduction to programming (basic),office applications
(word-excel- PowerPoint- access). Internet applications and search engines.
Books
Course Code: 15200104 Title: Social Services
Credits: 1 CreditsPrerequisite:
Course Description:
1 hour of social services is required,students are expected to participate in activities which will help the local community. The activities must be approved by the department
Books
Course Code: 15200101Title: Palestinian Issue
Credits: )3 ,0 ,3 (3 C.H.Prerequisite:
Course Description:
Palestine through time and place , the geography of Palestine, Palestine in old times , Palestine at the cmsaders era , Palestine at the mameluki era , Palestine between the national awareness and foreign avidness, Palestine under the British mandate (1920-1930)Palestine under the British mandate (1931-1939).Palestine under the British mandate (1939-1947).The end of the British Mandate and establishment of the state of Israel (1948-1947) Nakba 1948 , the Palestinian people and Issue (1965 – 1949),
Books
Course Code: 15200107 Title: Islamic Studies
Credits: )3 ,0 ,3 (3 C.H.Prerequisite:
Course Description:
This course includes some reading from Holy Qur'an and Sunnah, this course also deals with modern topics, Moderateness, secularism, Democracy, International, Zionism, Nasonisim , racialism , Human rights , family planning , Islamic banks , Islamic solutions , and Islamic attitudes towards non-Muslims.
University Elective 6 c.h.:
Course Code: 15200108 Title: Problem Solving
Credits: (3,0,3) 3 CHPrerequisite: none
Course Description:
Recognizing problems related to environments and explaining the solutions Recognizing local problems, and solution , explaining the solution of specialized problems , Highlighting simple and complex biological problems and how to deal with them.
Books
Course Code: 15200109 Title: Islamic thought
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200110 Title: Physical Education and First Aid
Credits: (3,0,3) 3 CHPrerequisite:
Course Description:
Books
Course Code: 15200111 Title: Psychology
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200124 Title: Economic Science
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200113 Title: Architectural Arts
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200114 Title: Principles of nutrition
Credits: (3,0,3) 3CH Prerequisite: none
Course Description:
Books
Course Code: 15200115 Title: Al hadith al shareef
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200116 Title: Faith
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200118 Title: Islamic Civilization
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200119 Title: History of Jerusalem
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200120 Title: Bringing Up Children and Family
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200121 Title: Library and Information search
Credits: (3,0,3) 3 CH Prerequisite: none
Course Description:
Books
Course Code: 15200109 Title: Islamic thought
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200122 Title: Fundamentals of astronomy
Credits: (3,0,3) 3CHPrerequisite: none
Course Description:
Books
Course Code: 15200123 Title: Environmental Science & human health
Credits: (3,0,3) 3CH Prerequisite: none
Course Description:
Books
Course Code: 15200123 Title: Environmental Science human health
Credits: (3,0,3) 3CH Prerequisite: none
Course Description:
Books
Faculty Requirements Mandatory: ( 34 C.H )
Course Code: 15200112 Title: English 2
Credits: )3 ,0 ,3 (3 C.H.Prerequisite: 15200106
Course Description:
It helps students to build up a repertoire of the scientific and technical terms used in their own specialization. It also helps them to understand and use vocabulary and expressions of séance and technologic
Books
Course Code: 12210325 Title: Technical Writing and Professional ethics
Credits: )2 ,0, 2 (2 C.H.Prerequisite: 15200112
Course Description:
Nature, types, levels and style of technical writing: Common errors in usage. Formal, informal and laboratory reports. Selection and presentation of graphic aids. Statistics in technical writing , Proposal writing, presentations and CV's. Interview Techniques.
Books
Course Code: 14140412 Title: Engineering Economics
Credits: )3 ,0,3 (3 C.H.Prerequisite: 3 year level
Course Description:
This Course aims at familiarizing students with Engineering Economic Subject . Topics covered are : Introduction to Engineering Economic with some fundamental (economic concepts the behavior of profit maximizing firms of the production process , shorten cost out put decisions , cost out put decision in the long run ,financial )Statements, inventories , depreciation methods ,Economic Feasibility studies. These topics help students to learn to think analytically and to become familiar with expressing these theories graphically where applicable .
Books
Course Code: 15010101 Title: Calculus 1
Credits: )3 ,0 ,3 (3 C.H.Prerequisite:
Course Description:
Preliminaries ( real numbers and the real line, lines, circles, parabolas, functions and graphing). Limits and Continuity, Derivatives and its applications, Differentiation Rules, Definite and indefinite integrals, The Fundamental theorem of calculus
Books<!-- table 5---------------------------------------------------------------------------------------------------->
Course Code: 15010102 Title: Calculus 2
Credits: )3 ,0, 3 (3 C.H.Prerequisite: 15010101
Course Description:
Applications of the Definite integral. Transcendental functions , Techniques of integration, sequences, Infinite series , Conic sections ,
Books
Course Code: 15010229
Title: Engineering mathematics 1(Linear Algebra and Differential Equations ) سابقا
Credits: )3 ,0 ,3 (3 C.H.Prerequisite: 15010102
Course Description:
Systems of linear equations, matrices, determinants, vector spaces and subspaces, linear transformation, Eigen values and eigenvectors, similarity of square matrices, diagonalization. Functions of several variables, Limits and continuity in higher dimensions. Partial differentiation. Classification of differential equations. First order differential equations. Second order differential equations.
Books
Course Code: 15010223 Title: Engineering Mathematics 2
Credits: )3 ,0 ,3 (3 C.H.Prerequisite: 15010229
Course Description:
Higher order differential equations Using Laplace transform in solving differential equations. Power series. Solution of differential equations. Fourier transforms complex numbers and the complex plane, Polar coordinates and graphing in polar coordinates. Multiple integral
Books
Course Code: 15020101 Title: General Physics 1
Credits: )3 ,0 ,3 (3 C.H.Prerequisite:
Course Description:
System of units vectors, plane motion of particles, force presentation analysis. Newton’s laws of motion. Work and energy moments, friction.
Books
Course Code: 15020105 Title: General Physics 1 Lab
Credits: )0, 3 ,1 (1 C.H.Prerequisite: 15020101) co-requisite (
Course Description:
Force table, Acceleration on an Inclined Plane, Newton's second law, Friction, Atwood's Machine, Free falling, conservation of energy, conservation of linear momentum and Moment of inertia.
Books
Course Code: 15020102 Title: General Physics 2
Credits: )3 ,0, 3 (3 C.H.Prerequisite: 15020101
Course Description:
Electric field and Gauss law, electric potentials capacitors, current and DC circuits, magnetic field, magnetic field due to currents, induction, magnetism of matter, Maxwell`s equations, electromagnetic oscillations and AC circuits.
Books
Course Code: 15020106 Title: General Physics 2 Lab
Credits: )0, 3, 1 (1 C.H.Prerequisite: 15020102) co-requisite(
Course Description:
Electric fields and equipotentials, cathode ray Oscilloscope, resistance and Ohms law, potentiometer, Wheatstone bridge, construction of a DC Ammeter and DC Voltmeter, variation of
resistance with temperature, capacitance meter by AC bridge method, R-C circuit, Earth’s magnetic field, current balance, focal length measurement and refractive index.
Books
Course Code: 15050101 Title: General Chemistry 1
Credits: )3 ,0 ,3 (3 C.H.Prerequisite:
Course Description:
Atomic structure, Periodic law periodic table, the chemical bonding, chemical reactions, Acids, Bases and Buffers ,Gases ,Liquid state, Thermo chemistry, Solutions, Ionic equilibrium, Applied chemistry, Electrochemistry, Corrosion of metals ,Water treatment , Chemistry of cements, chemistry of polymers, Fuels combustion, Pollution and its control.
Books
Course Code: 12210136 Title: Engineering Drawing
Credits: )0 ,6 ,2 (2 C.H.Prerequisite:
Course Description:
This course aims to provide students with the principles and Laws of Drawing, drawing principles, operations, engineering isometric, projection and views, computer drawing AutoCAD
Books
Course Code: 12210136 Title: Engineering Drawing
Credits: )0 ,6 ,2 (2 C.H.Prerequisite:
Course Description:
This course aims to provide students with the principles and Laws of Drawing, drawing principles, operations, engineering isometric, projection and views, computer drawing AutoCAD
Books
Course Code: 12210137 Title: Engineering Workshop
Credits: )0 ,3 ,1 (1 C.H.Prerequisite:
Course Description:
This course aims to provide students with Workshop principles basics, safety measures and precautions . Also it aims to provide students with basic manual skills in dealing with measuring equipments, manual sheet cutting operations , manual metal sawing and filing, Riveting process, manual threading ,electrical metal welding, and Lathe cutting processes
Books
Course Code: 12210238 Title: Thermodynamics (1)
Credits: (3,0,3) 3CHPrerequisite: 15020106 - General Physics (2)
Course Description:
Basic concepts and definitions. Types of energy. Properties of pure substances. Ideal gases. Work and heat. The first law of thermodynamics. The second law of thermodynamics, Entropy, irreversibility. Engineering application of the first and second law of Thermodynamics . Principles of fluid mechanics (statics and dynamics )the Zero law of thermodynamics properties of pure substance
Books
Course Code: 1221042 Title: Heat Transfer Fluid Mechanics
Credits: (3,0,3) 3CHPrerequisite: 15020102 - General Physics 2
Course Description:
Basic Concepts; fluid classification; dimensions and units; fluid properties; viscosity. Fluid static’s; fluid pressure; manometers; fluid static forces. Kinematics of fluid flow; velocity and acceleration; continuity equation, Bernoulli’s equation; energy equation; momentum equation. One dimensional conduction; steady analysis. Introduction to convection heat transfer. Forced convection heat transfer in external flows. Radiation heat transfer
Books
Course Code: 12210241 Title: Fluid Mechanics and Thermal Lab
Credits: (0,3,1) 1CHPrerequisite: Thermodynamics 1+ Heat transfer
Course Description:
Experiments applied to heat transfer, thermodynamics and fluid mechanics.
Books
Course Code: 12210238 Title: Thermodynamics (1)
Credits: (3,0,3) 3CHPrerequisite: 15020106 - General Physics (2)
Course Description:
Basic concepts and definitions. Types of energy. Properties of pure substances. Ideal gases. Work and heat. The first law of thermodynamics. The second law of thermodynamics, Entropy, irreversibility. Engineering application of the first and second law of Thermodynamics . Principles of fluid mechanics (statics and dynamics )the Zero law of thermodynamics properties of pure substance
Books
Course Code: 12210243 Title: Statics
Credits: (3,0,3) 3CH Prerequisite: 15020101 - General physics (1)
Course Description:
Fundamental concepts of mechanics, force vectors, equilibrium of particles and rigid bodies. Analysis of simple structures, internal forces, friction, geometric properties of rigid bodies.
Books Vector Mechanics for Engineers (Statics) by: Ferdinand Beer and E. Russell Johnston, JR.
Course Code: 12210244 Title: Dynamics
Credits: (3,0,3) 3 CH Prerequisite: 12210243 - Statics
Course Description:
Dynamics of particles, two- and three-dimensional dynamics of rigid bodies. Force and acceleration, work and energy, impulse and momentum.
Books Vector Mechanics for Engineers (Dynamics) by: Ferdinand Beer and E. Russell Johnston, JR.
Course Code: 12210345 Title: Strength of Materials
Credits: (3,0,3) 3 CH Prerequisite: Engineering Mathematics 2
Course Description:
Application of section method, Stress Components. Strain Components, stress–strain diagrams, Hook’s low. Poisson’s ratio, deformations of an axially loaded member, Thermal stress. Torsion, diagrams of internal forces, Bending stresses in beams, shearing. Stresses in beams. Compound Stress. Deflection of Beams, Buckling of columns.
Books
Course Code: 12210243 Title: Statics
Credits: (3,0,3) 3CH Prerequisite: 15020101 - General physics (1)
Course Description:
Fundamental concepts of mechanics, force vectors, equilibrium of particles and rigid bodies. Analysis of simple structures, internal forces, friction, geometric properties of rigid bodies.
Books Vector Mechanics for Engineers (Statics) by: Ferdinand Beer and E. Russell Johnston, JR.
Course Code: 12210446 Title: Mechanical Vibrations
Credits: (2,3,3) 3 CH Prerequisite: Engineering Mathematics + Dynamics
Course Description:
Properties of oscillatory motion. Derivation of governing differential equations. Free and damped vibrations. Harmonically excited motion, rotating and reciprocating unbalance, support motion. Vibration measurements. Vibration isolation. Transient vibrations. Free and forced vibrations in multi-degrees-of-freedom systems. Vibration absorbers. Continuous systems.
Books
Course Code: 12210347
Title: Theory of Machines Credits: (2,3,3) 3 CH
Prerequisite: 12210244 – DynamicsCourse
Description:Kinematic Analysis of mechanisms, Velocity and acceleration polygons.Static and inertia forces analysis, dynamic analysis of cams, gears, and geartrains, Balancing of machines.
Books
Course Code: 12210348 Title: Machine Element Design (1)
Credits: (3,0,3) 3 CH Prerequisite: 12210345 - Strength of Materials
Course Description:
Introduction to design process. Design considerations. Tolerances, fits and surface finish. Stress analysis and deflection of mechanical elements. Energymethods. Statistical considerations in machine design. Failure of machineelements. Fatigue. Design consideration, Stress analysis, Steady loading,Failure theories, Variable loading, Endurance limit, Fatigue analysis, Thedesign of screws, fasteners, and connections, the design of welded joints,Design of shafts and axles.
Books
Course Code: 12210349 Title: Autocad
Credits: (0,3,1) 1 CH Prerequisite: Engineering drawing
Course Description:
Books
Course Code: 12210350 Title: Engineering Applications Using Matlab
Credits: (2,3,3) 3 CH Prerequisite: Dept Consent
Course Description:
Matlab basics, Simulink Fundamentals, Modeling simulating of Engineering problems through mathematical Eqns, Modeling simulating Eng. Problems Using Real elements
Books
Course Code: 12210355 Title: Control Systems 1
Credits: (3,0,3) 3 CH Prerequisite: Engineering Mathematics 2
Course Description:
Definition of control systems , lap lace transform , mathematical modeling of control systems, Open and closed loops (feedback) control systems. Modeling of physical systems: electrical, Mechanical, hydraulic systems. System representations: System block diagrams and signal flow graphs. State variable models. Feedback control system characteristics. Performance of feedback control systems. Routh-Hurwitz stability. Steady state error coefficient. Rout locus Method.
Books
Course Code: 12210556 Title: Introduction to Graduation Project
Credits: (0,0,1) 1 CH Prerequisite: Not less than 115 C.H + Dep. Consent
Course Description:
Collection of Background scientific material relating to the project which the undergraduate selects for project 2.
Books
Course Code: 12210557 Title: Graduation Project
Credits: (0,0,3) 3 CH Prerequisite: 12210556 - Introduction to Graduation Project
Course Description:
Practical implementation of theoretical and experimental knowledge gained from the course of his study and work carried out in project one.
Books
Course Code: 12210358 Title: Field training 1
Credits:Prerequisite:
Course Description:
Books
Course Code: 12210359 Title: Field training 2
Credits:Prerequisite: Field training 1 coreq
Course Description:
Books
Course Code: 12210467 Title: Sensors, Transducers and Interfacing
Credits: (3,0,3) 3 CH Prerequisite: Electronics
Course Description:
Static, dynamic and statistical characteristics of measurement system elements. Loading effects in measurement systems. Sensing elements: Resistive, capacitive, inductive, electromagnetic, thermoelectric, elastic, piezoelectric and electrochemical sensing elements. Optical and ultrasonic measurement systems. Signal conditioning elements: Deflection bridges and amplifiers. Signal processing elements: Analogue to digital (A/D) conversion. On/ off sensors, temperature, pressure, humidity, position, speed, Acceleration, light, current, voltage, proximity: principles of operation, application, connection.
Books
Course Code: 12210468 Title: Sensors, Transducers and Interfacing Lab
Credits: (0,3,1) 1CH Prerequisite: 12210467 - Transducers and Interfacing
Course Description:
Experiments on transducers and their construction. Experimental identification of static characteristics of sensing elements: Ideal
straight line, non-linearity, sensitivity, hysteresis, resolution, and error bands. Experiments on loading effects in measurement systems. Experiments on deflection bridges and amplifiers. Analogue to digital conversion and data acquisition.
Books
Course Code: 12210472 Title: Control System 2
Credits: (3,0,3) 3 CH Prerequisite: Control system (1)
Course Description:
Frequency response methods. Stability in frequency domain. Design of feedback control systems. Design of state variable feedback systems. Introduction to digital control. Computer control.
Books
Course Code: 12210473 Title: Control Systems Lab.
Credits: (0,3,1) 1 CH Prerequisite: Control system (2) or Digital Control (co-requisites)
Course Description:
Open and closed loop systems. Servomechanism principles. Effect of gain, integral, derivative control, and velocity feedback on system performance. Frequency response measurements. Computer aided design of control systems. Control of flow, liquid level, magnetic, electrical, mechanical and thermal systems.
Books
Course Code: 12210574 Title: Design of Mechatronics Systems
Credits: (3,0,3) 3 CH Prerequisite: 12210472 - Control System 2
Course Description:
Background on mechatronics systems design. Mathematical modeling and computer simulation of mechatronics systems. Control system performance analysis. Comprehensive projects where the students try to combine their skills in electrical, mechanical and computer technologies to produce functional mechatronics systems.
Books
Course Code: 12210575 Title: Pneumatic and Hydraulic Systems
Credits: (2,3,3) 3 CH Prerequisite: Control Systems 1
Course Description:
The objective of this course is to familiarize students with fluid power systems design and operation. Incompressible and compressible flow. The distribution system. Source of hydraulic and pneumatic power: pumps and compressors. Actuators: linear actuators (hydraulic and pneumatic cylinders). Limited rotation actuators. Gear motors, vane motors and piston motors. Hydraulic and pneumatic valves. Design and analysis of hydraulic and pneumatic circuits.
Books
Course Code: 12210106 Title: Pneumatic Hydraulic Control Systems/lab
Credits: (0,3,1) 1 C.H.
Prerequisite: Sensors, Transducers and interfacing lab. +protection control devices lab.
Course Description:
Pneumatic and electro pneumatic components , Hydraulic and electro hydraulic components, pneumatic hydraulic circuits , different applications. Applications through PLC
Books
Course Code: 12210577 Title: Robotics
Credits: (2,3,3) 3 CH Prerequisite: 12210472 - Control System 2
Course Description:
Spatial description and transformation. Manipulator kinematics and inverse manipulator kinematics. Jacobians: Velocities and static forces. Manipulator dynamics. Trajectory generation and linear control of manipulators. Introduction to mobile robot. Laboratory applications.
Books
Course Code: 12210481 Title: Strength of Materials Lab
Credits: (0,3,1) 1CH
Prerequisite: Strength of MaterialCourse
Description:Reactions on beams. Centroide and moment of inertia. Estimating Modulus of Elasticity and Modulus of Rigidity for various materials. Stress-Strain diagram. Torsion in bars. Studying the motion of various mechanisms. Static and dynamic balancing. Simple and compound pendulum. Gears. Governors.
Books
Course Code: 12210583 Title: Digital Control
Credits: (3,0,3) 3 CH Prerequisite: Control 2
Course Description:
Introductory Digital Control, Discrete Systems Analysis, A/D converters, Signal conditioning and Amplifiers discrete time systems Z- transform , open loop and closed loop systems Sampled-Data Systems, Discrete Equivalents, Design Using Transform Techniques, Design Using State-Space Methods. Quantization Effects, Sample Rate Selection, System Identification. Pole placement controllers. closed loop regulation :P,PI, PID. digital controller design, frequency response methods
Books
Course Code: 12210586 Title: Manufacturing Processes 1
Credits: (3,0,3) 3 CH Prerequisite: Strength of Materials
Course Description:
Basic Manufacturing processes. Nature and properties of engineering materials. Production of metals. Foundry processes and special casting processes. Welding. Plastic. Hot and cold forming. Powder metallurgy and special forming processes. Material removal technology. Special material removal processes. Heat treatment of metals. Surface cleaning and finishing processes.
Books
Course Code: 12210587 Title: Manufacturing Processes Lab
Credits: (0,3,1) 1 CH Prerequisite: Manufacturing Process 1
Course Foundry processes and special casting processes. Welding. Plastic.
Description: Hot and cold forming. Powder metallurgy and special forming processes. Material removal technology. Special material removal processes. Heat treatment of metals. Surface cleaning and finishing processes.
Books
Course Code: 12210588 Title: Renewable Energy Systems
Credits: (2,3,3) 3 CH Prerequisite: Heat Transfer
Course Description:
Energy concepts, solar energy, solar systems, wind energy, wind generators, Hydropower, Bio-energy, energy storage and conversion other energy resources
Books
Course Code: 12210589 Title: Special Topics in Mechatronics
Credits: (3,0,3) 3 CH Prerequisite: Dept. Consent
Course Description: Contemporary issues that arise in developing technologies
Books
Course Code: 12210590 Title: Automotive Systems
Credits: (3,0,3) 3 CH Prerequisite: Dept. Consent
Course Description:
Introduction, Analysis of power train, Clutch, Release mechanism, Manual transmission, Transmission, Ratios, Automatic transmission, Drive shafts, Transfer case, Power train of 4WD. Final drive, Differential axles, Wheels, Tires, Suspension system, Automatic leveling suspension system, Brake systems, Anti-lock brake system (ABS), Steering system, Power steering, Wheels alignment, Electronic traction system (ETS).
Books
Course Code: 12210591
Title: Automotive Electricity and Electronics Credits: (3,0,3) 3 CH
Prerequisite: General Physics 2Course
Description:Battery, starting systems, charging systems, vehicle lighting systems, conventional and electronic ignition, instrumentation, vehicle speed control, anti-lock brake systems, air bag systems, electronically controlled automatic transmission, comfort systems .
Books
Course Code: 12210592 Title: Internal Combustion Engine I
Credits: (3,0,3) 3 CH Prerequisite: Heat Transfer
Course Description:
Engine types and their operation ,engine operating parameters,, thermo chemistry of fuel- Air mixtures, ideal models of engine cycles, gas exchange processed, combustion in spark – ignition engines combustion in compression – ignition engines , combustors, and pollutant formation and control.
Books
Course Code: 12210501 Title: Special topics in control systems
Credits: (2,3,3) 3 C.H.Prerequisite: Control systems 2
Course Description:
This course aims to provide students with the necessary computing and analytical knowledge in control engineering and system simulation using Matlab and Simulink. The course includes
modeling and simulated selected topics in modern digitals and analog control systems. Also, the advantages of these systems and
their different application will be analyzed and simulated. Books
Course Code: 12210281 Title: Mechanics for Electrical Engineering
Credits: (3,0,3) 3 C.H.Prerequisite: Calculus II + general physics II
Course Description:
This course aims to provide students with the principles and Laws of Mechanics - Vectors - Vectorial representation of forces and
moments - Vector operations. Statics of particles, equilibrium of rigid bodies. Friction, Elements of rigid body dynamics, Translation and Rotation of Rigid Bodies - Velocity and acceleration - General Plane motion - Moment of Momentum Equations - Rotation of rigid Body - Work energy equation
Books
Course Code: 12210584 Title: Conversion of energy
Credits: (3,0,3) 3 C.H.Prerequisite:
Course Description:
Books
Course Code: 12210585 Title: Digital design for mechatronics
Credits: (3,0,3) 3 CH Prerequisite: Digital logic and digital electronics
Course Description:
Background on mechatronics systems design. Mathematical modeling and computer simulation of mechatronics systems. Control
system performance analysis. Comprehensive projects where the students try to combine their skills in electrical, mechanical and
computer technologies to produce functional mechatronics systems.Books
Course Code: 12210503 Title: Machine design
Credits: (3,0,3) 3 C.H. Prerequisite: Theory of machines
Course Description:
Books
Course Code: 12210504 Title: Advanced Mechanical Machines
Credits: (2,3,3) 3CH
Prerequisite: Theory of machinesCourse
Description:Books
