Embed Size (px)
Citation preview
Version 6.0 ReadMe
1
iNEWS® Newsroom Computer System Version 6.0 ReadMe
Date Revised Changes Made
18 Dec 2016 Added new features & changes for 6.0
20 Nov 2016 Added changes for 5.6.1
27 July 2016 Added new feature info for 5.6
15 June 2016 Added changes for 5.5
21 Feb 2016 Added changes for 5.4.1
14 Dec 2015 Added changes made for v5.4
11 August 2015 Added changes made for v5.3.1
17 June 2015 Added changes made for v5.3
9 April 2015 Added changes made for v5.2.2
28 January 2015 Added changes made for v5.2.1
9 December 2014 Added changes made for v5.2
23 Oct 2014 Added changes made for v5.1.1
17 Sept 2014 Added changes made for v5.1
9 June 2014 Initial v5.0 version (based on v4.7.x doc.)
Important Information Avid recommends that you thoroughly read all of the information in this ReadMe file before installing or using any new software release.
Note: Search the Avid Knowledge Base (http://www.avid.com/onlinesupport) for the most up-to-date ReadMe file, which contains the latest information that might have become available after the documentation was published.
This document describes compatibility issues with previous releases, hardware and software requirements, software installation instructions, and summary information on system and memory requirements, when applicable. This document also lists any hardware and/or software limitations.
Note: Since this release of iNEWS will be more widely distributed than previous versions, some notes on important features and changes have been brought forward from previous ReadMe documents. Notes that
Version 6.0 ReadMe
2
are less important were not brought forward, and users should reference older iNEWS ReadMe files for additional change information not contained in this ReadMe.
Contents Important Information ............................................................................................................................................ 1
Contents ..................................................................................................................................................................... 2
Compatibility Notes and Issues ................................................................................................................................. 5
iNEWS Client ........................................................................................................................................................ 5
iNEWS Server ....................................................................................................................................................... 5
Workstation/Server Compatibility Chart ............................................................................................................... 5
iNEWS Community ............................................................................................................................................... 6 External Users (LDAP).......................................................................................................................................... 6
Fast Text Search .................................................................................................................................................... 6
Media | Index ......................................................................................................................................................... 6
Command .............................................................................................................................................................. 6
MOS Gateway ....................................................................................................................................................... 6 Console Multiplexer .............................................................................................................................................. 7
Data Receiver ........................................................................................................................................................ 7
Instinct ................................................................................................................................................................... 7
NewsCutter ............................................................................................................................................................ 7
Install & Upgrade Notes and Issues ........................................................................................................................... 7
iNEWS v6.0 ........................................................................................................................................................... 7 iNEWS v5.6 ........................................................................................................................................................... 8
Words Dictionary (/site/dict/words) .................................................................................................................. 8
iNEWS v5.5 ........................................................................................................................................................... 9
Upgrade 5.x to 5.5 Limitation ............................................................................................................................ 9
Red Hat Installation ........................................................................................................................................... 9
iNEWS v5.4 ........................................................................................................................................................... 9 Change to iNEWS installer ................................................................................................................................ 9
Fresh installation-single language ..................................................................................................................... 9
Upgrades ............................................................................................................................................................ 9
Silent Installation ............................................................................................................................................. 10
iNEWS v5.3 ......................................................................................................................................................... 10 iNEWS v5.2 ......................................................................................................................................................... 10
iNEWS v5.0 ......................................................................................................................................................... 10
New Features ........................................................................................................................................................... 11
For iNEWS v6.0 .................................................................................................................................................. 11
Version 6.0 ReadMe
3
MediaCentral | UX Integration ........................................................................................................................ 11
MediaCentral Platform Integration .................................................................................................................. 13
Updated Browser Framework .......................................................................................................................... 13 For iNEWS v5.6 .................................................................................................................................................. 13
MOS Integration .............................................................................................................................................. 13
Command Integration ...................................................................................................................................... 14
For iNEWS v5.5 .................................................................................................................................................. 14
Local Printing .................................................................................................................................................. 14
iNEWS CTC .................................................................................................................................................... 15 For iNEWS v5.4 .................................................................................................................................................. 17
File Link .......................................................................................................................................................... 17
For iNEWS v5.3 .................................................................................................................................................. 18
Clear AIR-DATE Column Option ................................................................................................................... 18
For iNEWS v5.2 .................................................................................................................................................. 18
Media | Index Integration ................................................................................................................................. 18 Divehi Support ................................................................................................................................................. 18
For iNEWS v5.1 .................................................................................................................................................. 19
New Form Field Types .................................................................................................................................... 19
For iNEWS v5.0 .................................................................................................................................................. 19
Story Grouping ................................................................................................................................................ 19
Help System and User’s Guide ........................................................................................................................ 19 Messaging Enhancements ................................................................................................................................ 19
Media | c .......................................................................................................................................................... 20
Changes between 5.6.1 and 6.0 ............................................................................................................................... 20
Changes between 5.6 and 5.6.1 ............................................................................................................................... 20
Changes between 5.5 and 5.6 .................................................................................................................................. 20 Changes between 5.4.1 and 5.5 ............................................................................................................................... 20
Changes between 5.4 and 5.4.1 ............................................................................................................................... 20
Changes between 5.3.1 and 5.4 ............................................................................................................................... 20
Changes between 5.3 and 5.3.1 ............................................................................................................................... 21
Changes between 5.2.2 and 5.3 ............................................................................................................................... 21
Media Indexing ................................................................................................................................................ 21 Monitor ............................................................................................................................................................ 23
iNEWS Client .................................................................................................................................................. 23
iNEWS Server ................................................................................................................................................. 23
Changes between 5.2.1 and 5.2.2 ............................................................................................................................ 23
iNEWS Client .................................................................................................................................................. 23
Version 6.0 ReadMe
4
Changes between 5.2 and 5.2.1 ............................................................................................................................... 23
iNEWS Server ................................................................................................................................................. 23
iNEWS Client .................................................................................................................................................. 24 Localizations .................................................................................................................................................... 24
Changes between 5.1.1 and 5.2 ............................................................................................................................... 24
iNEWS Server ................................................................................................................................................. 24
Localization ..................................................................................................................................................... 24
Changes between 5.1 to 5.1.1 .................................................................................................................................. 25
iNEWS Server ................................................................................................................................................. 25 Changes between 5.0 and 5.1 .................................................................................................................................. 25
User Interface .................................................................................................................................................. 25
FTS .................................................................................................................................................................. 25
iNEWS Server ..................................................................................................................................................... 26
Changes between 4.7.1 and 5.0 ............................................................................................................................... 26
User Interface .................................................................................................................................................. 26 Polling Action Servers ..................................................................................................................................... 26
Deko Select Interface ....................................................................................................................................... 26
Changes between 4.7.0 and 4.7.1 ............................................................................................................................ 26
iNEWS Server ..................................................................................................................................................... 26
Qualified Asian Languages and IMEs ..................................................................................................................... 26
Korean ................................................................................................................................................................. 26 Chinese Simplified .............................................................................................................................................. 26
Chinese Traditional .............................................................................................................................................. 27
Japanese ............................................................................................................................................................... 27
Vietnamese .......................................................................................................................................................... 27
Microsoft Windows Critical Updates ...................................................................................................................... 27 Known Issues and Limitations ................................................................................................................................. 27
Divehi Support ..................................................................................................................................................... 27
Chinese Localization Issue .................................................................................................................................. 27
German Localization Issue .................................................................................................................................. 28
Local Database .................................................................................................................................................... 28
Windows 7 and Windows 8 with UAC Enabled ................................................................................................. 28 External Users (LDAP)........................................................................................................................................ 28
Plug-ins ................................................................................................................................................................ 28
UNC Paths ........................................................................................................................................................... 29
iNEWS Web Services API .................................................................................................................................. 29
Multiple Monitors ................................................................................................................................................ 30
Version 6.0 ReadMe
5
Macros and Keystrokes........................................................................................................................................ 30
Technical Support Information ................................................................................................................................ 30
Accessing Online Support ................................................................................................................................... 30
Compatibility Notes and Issues This section contains compatibility information related to the iNEWS 6.0 release or earlier. Specific versions are mentioned when pertinent.
iNEWS Client The iNEWS client software is qualified and supported for use on Windows 10, Windows 8, Windows 7 (32-bit), and Windows 7 64-bit Service Pack 1. This version of iNEWS is not officially supported for use on any other Windows operating system.
iNEWS Server The iNEWS Server is qualified and supported for use with Red Hat Enterprise Linux 7.2, 6.5 & 6.7 64 bit. For instructions on installing Red Hat v7.2, please see the Red Hat Installation Document, included with the iNEWS ISO. See also more information about Red Hat in the Install & Upgrade Notes section later in this ReadMe.Note: Avid recommends the servers be kept up-to-date with the latest patch to avoid any vulnerability issues in the Linux kernel, such as the one known as “Dirty Cow”. For more information on it, see https://access.redhat.com/security/vulnerabilities/DirtyCow.
Workstation/Server Compatibility Chart The following chart shows the compatibility matrix for client/server versions of iNEWS. Typically, older client versions can be used to log in to servers of the same or newer versions. However, newer client versions cannot be used to log in to servers with older versions.
iNEWS
2.8 Server
3.0/1/2 Server
3.3. Server
3.4/5/6 Server
3.7 Server
4.0 Server
4.5/6 Server
4.7 /1 Server
5.0 - 2 Server
5.3 - 6 Server
2.8 Client
Allowed Allowed Allowed Allowed Allowed Allowed Allowed Allowed Allowed Allowed
3.0/1/2 Client
Not allowed
Allowed Allowed Allowed Allowed Allowed Allowed Allowed Allowed Allowed
3.3 Client
Not allowed
Not allowed
Allowed Allowed Allowed Allowed Allowed Allowed Allowed Allowed
3.4/5/6 Client
Not allowed
Not allowed
Not allowed
Allowed Allowed Allowed Allowed Allowed Allowed Allowed
3.7 Client
Not allowed
Not allowed
Not allowed
Not allowed
Allowed Allowed Allowed Allowed Allowed Allowed
4.0 Client
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Allowed Allowed Allowed Allowed Allowed
4.5/6 Client
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Allowed Allowed Allowed Allowed
4.7 /1 Client
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Allowed Allowed Allowed
Version 6.0 ReadMe
6
5.0 - 2 Client
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Allowed Allowed
5.3 - 6 Client
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed*
Allowed
*Note: Due to compatibility issues with a new Clear AIR DATE feature on clients running versions 5.3.x – 5.5.x, these versions are not supported on servers running versions 5.0-5.2 or earlier.
iNEWS Community In a previous version of iNEWS, the iNEWS Community communication protocol was modified to allow databases larger than 16GB. This modification broke compatibility with iNEWS Server version 3.4.4 and earlier. iNEWS 3.4.5 still supports Community communication with either iNEWS 3.4.5 or earlier for systems with a small database, but for those with large databases, Community communication is supported only with iNEWS 3.4.5 and later. Both simultaneously are not supported. All 2.x and 3.x servers should be upgraded to at least 3.4.5 when a large database server is added to the community. And when a community includes a 5.x system, any 3.x or earlier should be upgraded to 3.7 and any 4.x systems should be upgraded to 4.7.
Note: The iNEWS 3.7 and iNEWS 4.7 releases support 50 Community members, up from 24.
The iNEWS 6.0 release supports 255 Community members, up from 50.
External Users (LDAP) • Beginning with version 4.x, Avid iNEWS server allows user authentication via Windows Active Directory;
however, external users are not compatible with the following clients:
• iNEWS Workstations earlier than 4.0.0
• FTP clients: teleprompters, NewsCutter’s NRCS Tool
• COM clients: NewsCutter's NRCS Tool; Instinct; MOS Gateway's roStorySend and mosObj.
• Web Client
• Web Access
• Interplay Central client earlier than 1.3.0
Fast Text Search Version 4.0.3 of Fast Text Search (FTS 4) is required for iNEWS Server version 5.1 and later on both Windows Server 2008 R2 and 2012 R2. The recommended operating system is Windows Server 2012 R2. FTS 4 is not supported on any iNEWS Server versions earlier than 3.5. A full re-index is required with an upgrade to FTS 4.
FTS is qualified in a virtualized environment when the guest OS instance meets the application’s minimum system requirements.
Media | Index Avid iNEWS v5.2 or later is qualified and supported for use with Media | Index.
Command The iNEWS Server is qualified and supported for use with Command 1.0.1 or later. Command v3.2 is required, however, for proper integration with the iNEWS VID-DURATION feature.
MOS Gateway The iNEWS system is qualified and supported for use with MOS Gateway 4.0 or later.
Version 6.0 ReadMe
7
Console Multiplexer The iNEWS Server requires version 2.0 of the console multiplexer (MUX) software, which is on the iNEWS installation CD. The console multiplexer cannot currently display Unicode characters. A terminal emulator that supports Unicode characters can be used if Unicode support is required.
Data Receiver The iNEWS system is qualified and supported for use with Data Receiver 1.8 or later. iNEWS 3.0 Server saves data as well-formed XML. Data Receiver SFCs must be updated to deliver well-formed XML. Also, field tags have changed from <f id=TYPE></f> to <string id=”TYPE”></string>.
Instinct The iNEWS system is qualified and supported for use with Avid Instinct 1.1 and 1.6 or later. After the iNEWS client software is installed on an Instinct computer, manual registration of the Instinct installation’s COM control should be performed: Start > Run > regsvr32 “C:\Program Files\Avid\Avid iNEWS Instinct\iNewsCOMU.dll”.
NewsCutter The iNEWS system is qualified and supported for use with NewsCutter NRCS Tool 6.1.5 or later. After the iNEWS client software is installed on a NewsCutter, manual registration of the NewsCutter installation’s COM control should be performed: Start > Run > regsvr32 “C:\Program Files\Avid\Avid NewsCutter\iNewsCOMU.dll”. If both NewsCutter and Instinct are on the machine, the Instinct COM control should be the one you register.
Install & Upgrade Notes and Issues This section contains information related to upgrading from previous versions of iNEWS.
iNEWS v6.0 • Prior to upgrading the iNEWS software, execute the dbdump command on the server to make a copy of the
database. For instance:
#dbdump Cv -f + |gzip > /tmp/wavd.dbdump.gz
To upgrade a single server A system, follow these steps to convert an iNEWS v5.x database to v6.0.
Note: For dual-server systems, do the conversion for server A first, and then repeat the procedure for server B. Avid also recommends to do some cleanup of the database before the database conversion process. Database size may be increased insignificantly (up to 10%) during the dbrestore.
1. Navigate the directories and install server portion, use WinSCP to move the install script over to the server. You will need target server, root access. Place the files in /home/so directory.
# cd /home/so/<install folder>/linux
2. Take server offline, logout session, and close the database by issuing the following commands:
# offline # logout all # shutdown (say "yes" to prompt) # reboot
3. Log back into PUTTY as the SO user. 4. Navigate to install folder and start installation.
# cd /home/so/<install folder>/linux # sh install upgrade
Version 6.0 ReadMe
8
# reboot (remote session to the server will end)
5. Log back into PUTTY as the SO user, and update dictionary.
# dictionary -update /site/dict # dictionary -update /site/web
6. Switch to super user and execute:
# maketab –i # makemontab –i
7. Reconnect iNEWS disks (This command differs depending on which server configuration you are connecting)
# connect a net=a
8. Look for a valid output like this response:
Post output:
Connect successful for WAVD-A, starting servers...
Performing user added commands (/site/exc/connect.sh)
Starting iNEWS Web Access Service.
A is OFFLINE. ID is WAVD.
System is A. Master is A.
9. Clear and initialize the database on the server by issuing the following commands:
# finit – # dbgen –
10. Restore the database on the server by issuing the dbrestore command to place database onto a clean system.
# gunzip < /tmp/wavd.dbdump.gz | dbrestore dpixv -i –M –f + Starting: Dump(1) Block(0), dumped on 2016-12-15 16:08:15
Dumped by 5.6.1.4 RH6 Ok to do user? (y/n) y Ok to do user blobs? (y/n) y Ok to do message? (y/n) y Ok to do group? (y/n) y Ok to do system-blobs? (y/n) y Ok to do community? (y/n) y Project cd67eeb7-eb0c-47e9-a3e6-9ec34f542415 test
Elapsed time: 0:26
11. Startup system normally and bring the database back online.
# startup
12. Install an iNEWS 6.0 client and log into the server as normal.
iNEWS v5.6
Words Dictionary (/site/dict/words) In this version, /site/dict/words file is updated and the below lines uncommented to avoid generation of a “Missing translation” message from maketab after a dictionary update is run:
W_FILESERVER_USERNAME /
W_FILESERVER_PASSWORD /
Version 6.0 ReadMe
9
iNEWS v5.5
Upgrade 5.x to 5.5 Limitation After upgrading from version 5.x to version 5.5, the Words dictionary (/site/dict/words) does not update with the filelink and iNEWS CTC settings. So, these settings must be added manually. For more information, see the New Features sections “iNEWS CTC” and “File Link” later in this ReadMe.
Red Hat Installation Avid recommends to install security patches recommended by RH: https://access.redhat.com/labs/drown/
• RH7.2 - openssl-1.0.1e-51.el7_2.4.x86_64.rpm • RH6.X - openssl-1.0.1e-42.el6_7.4.x86_64.rpm
For RH7 version, there is no log4cpp rpm to install from RH7.iso, avid recommends to install it manually.
Install script is changed to install rpms with yum utility for both RH6 and RH7, but if customer is not subscribed to RH service, then option to run shell script with mounted ISO is available as well.
RH6.5 openssl package should be updated to the same one from RH6.7 (openssl-1.0.1e-42.el6_7.4x86_64.rpm) in order to have inewsctc service running successfully.
iNEWS v5.4
Change to iNEWS installer The iNEWS installer format has been converted into a multi lingual installer or MSI type file. The MSI installer executable Setup.exe file can perform installations of a single, or up to 17 languages, for fresh installations, upgrades of iNEWS both dynamically and in silent mode. The MSI Installer will install iNEWS clients on Windows 7, and Windows 8 supported platforms. The iNEWSDeploy batch file was designed to be able to be run from a network location. It uses Environment variables to create the path & feature names to install. As written, the batch file will install English Only as the default.
Fresh installation-single language For a fresh installation of iNEWS instance, install shield will provide a new custom setup dialog box with 17 languages to choose from with English Selected as the default. Each language you select will appear on the desktop as a shortcut icon with the language type appended in the title for easy identification. Ex. iNEWS Spanish Latin, iNEWS Danish, iNEWS French Canadian.
To initiate the install process:
1. Double click on the setup executable file. 2. Click Next in the Install Shield Wizard popup box. 3. Click YES radial button to accept the terms of the license agreement and then click Next. 4. On the Custom setup screen, choose the desired check box of the client languages to install and
then Next. 5. On the Ready to install screen, click the Install button to start the process and click Finish to end.
Upgrades The MSI installer will seamlessly upgrade from prior versions of iNEWS. The detection and removal will occur first, as notified by the popup (in English only). Then, the Install shield will move to the installation of the desired languages selected. This is similar to the fresh installation with the exception of the software removal screen, which will be displayed in a banner with the message written in English only.
1. Double click on the setup executable file and then select the language for installation and OK button.
2. After the MSI is extracted, click Next in the Install Shield Wizard popup box. 3. Click YES radial button to accept the terms of the license agreement and then Next. 4. On the Custom setup screen, choose the desired check box of the client languages to install and
then Next.
Version 6.0 ReadMe
10
5. On the Ready to install screen, click the Install button to start the process,
Note: The Uninstall of the previous version will occur first and then the installation will take place.
6. Click Finish radial button to end.
Silent Installation Silent Installations can be performed as well, but require editing detailed understanding of the parameters and need to be setup in an editor program like notepad. Please reference the Silent Install-MSI document in the Docs folder of the iNEWS installation distribution directory or CD.
iNEWS v5.3 • If integrating this version of iNEWS with Media Index, some configuration is required so that Media Index
logging is correctly enabled. The procedure for this is provided in the New Features of this ReadMe. • In a multi-zone Media Index setup with multiple iNEWS systems all iNEWS systems have to be part of an
iNEWS community. • Attempting a network dbdump and restore from an earlier version of iNEWS, such as 5.1 to the latest
version 5.3 could result in a warning about the record size exceeding the transfer block size. Should this occur, conduct dbdumps and restores via file not network. This limitation does not apply when attempting a network dbdump and restore from one v5.3 system to another v5.3 system. IN-1253
iNEWS v5.2 • If integrating this version of iNEWS with Media Index, an additional package, log4cpp, is required from
Redhat. It is necessary for the sync agent in the ftsindex program to function with the Avid Common Services (ACS) bus.
iNEWS v5.0 • Prior to upgrading the iNEWS software, execute the dbdump command on the server to make a copy of the
database. For instance:
#dbdump Cv -f + |gzip > /tmp/wavd.dbdump.gz
To upgrade a single server A system, follow these steps to convert an iNEWS v4.x database to v5.0.
Note: For dual-server systems, do the conversion for server A first, then repeat the procedure for server B.
1. Navigate the directories and install server portion, use WinSCP to move the install script over to the server. You will need target server, root access. Place the files in /home/so directory.
# cd /home/so/<install folder>/linux
2. Take server offline, logout session, and close the database by issuing the following commands:
# offline # logout all # shutdown (say "yes" to prompt) # reboot
3. Log back into PUTTY as the SO user. 4. Navigate to install folder and start installation.
# cd /home/so/<install folder>/linux # sh install upgrade # reboot (remote session to the server will end)
5. Log back into PUTTY as the SO user, and update dictionary.
Version 6.0 ReadMe
11
# dictionary -update /site/dict # dictionary -update /site/web
6. Switch to super user and execute:
# maketab –i # makemontab –i
7. Reconnect iNEWS disks (This command differs depending on which server configuration you are connecting)
# connect a net=a
8. Look for a valid output like this response:
Post output:
Connect successful for WAVD-A, starting servers...
Performing user added commands (/site/exc/connect.sh)
Starting iNEWS Web Access Service.
A is OFFLINE. ID is WAVD.
System is A. Master is A.
9. Clear and initialize the database on the server by issuing the following commands:
# finit – # dbgen –
10. Restore the database on the server by issuing the dbrestore command to place database onto a clean system.
# gunzip < /tmp/wavd.dbdump.gz | dbrestore dpixv -i –M –f + Starting: Dump(1) Block(0), dumped on 2014-02-13 16:08:15
Dumped by 4.7.0.10 RH6 Ok to do user? (y/n) y Ok to do user blobs? (y/n) y Ok to do message? (y/n) y Ok to do group? (y/n) y Ok to do system-blobs? (y/n) y Ok to do community? (y/n) y Project cd67eeb7-eb0c-47e9-a3e6-9ec34f542415 test
Elapsed time: 0:26
11. Startup system normally and bring the database back online.
# startup
12. Install an iNEWS 5.0 client and log into the server as normal.
New Features This section contains a listing of new features.
For iNEWS v6.0
MediaCentral | UX Integration • A new field type called, assignment, has been added in this version of iNEWS to provide a link to the
Assignment pane used to generate the story from MediaCentral.
Version 6.0 ReadMe
12
For users who want to participate in the story-centric workflow initiated from an assignment in MediaCentral | UX, a field called ‘assignment’ must be added to the story forms used in the workflow.
Note: For information on adding fields to story forms, see “Customizing Forms” in the Avid iNEWS Setup & Configuration Guide.
After the assignment field is created and the story is part of an assignment destination queue, users can click the assignment link (the field in the Story Form) a MediaCentral pane opens within iNEWS workspace, and presents the assignment linked to the iNEWS story. You may be required to sign in with your MediaCentral credentials.
The following image shows MediaCentral | UX login screen, hosted in the iNEWS v6.0 window.
The following image shows a linked assignment in MediaCentral | UX, hosted in the iNEWS v6.0 window.
Version 6.0 ReadMe
13
MediaCentral Platform Integration • With MediaCentral Platform v2.7, the W_ACS_GATEWAY_PORT was 9500. That port is changed to
9900 in version 2.8. This port value is located in iNEWS as a token configured in /site/dict/words.
Updated Browser Framework • To enable support of MediaCentral panes, version 6.0 of Avid iNEWS now uses the embedded chromium
framework for its browser.
For iNEWS v5.6
MOS Integration • In iNEWS client software, when the cursor is located in the Story Form panel, a new context (pop-up)
menu option is available upon a right-click. Selecting the new option, called Insert MOS item from Video ID, opens the Create MOS from Video ID dialog box, which allows the user to add or replace a MOS item in the story form.
A MOS item will be created with the video ID you enter assigned to the objID and the itemSlug. This item will be used in the MOS workflow, similar to this example shown:
Version 6.0 ReadMe
14
Command Integration • In iNEWS server, support of “PARTIAL” status that is sent by Command device of v.3.5 is added now and
appears in the Status column in the Queue panel. Also, the following line is added to /site/dict/mcs by iNEWS Server installer: ; Entries added on Tue Jul 26 11:44:47 EEST 2016
;
A_EVPARTIAL /PARTIAL
No additional changes in iNEWS server/client configuration are needed.
For iNEWS v5.5
Local Printing • In iNEWS client software, the Local Printing dialog box offers two new check boxes for additional
functionality for when printing the queue view with Story Preview selected.
Version 6.0 ReadMe
15
o The Production Cues check box enables the printing of production cues. o Previously all stories in a queue would be printed. Now, the Skip Stories check box enables the
system to skip printing stories marked by an asterisk (*) in queues. Stories are marked by putting the asterisk in each story’s PAGE field.
iNEWS CTC • As part of development of APIs for the Connectivity Toolkit Media Suite (CTMS), the iNEWS adapter,
named iNEWS CTC is available as a connector between iNEWS and the platform. CTC stands for Connectivity Toolkit Connector. Note: Notifications service is needed in addition to the standard MediaCentral installation for the platform. Also, some configuration is required on the iNEWS side. This procedure assumes a working knowledge on how to edit site and/or system files in iNEWS; for more information, see the iNEWS Setup Configuration Guide.
To configure the iNEWS CTC:
1. Verify that your licenses on the iNEWS server allow for connections of CTC instances, as shown below:
Version 6.0 ReadMe
16
If your site does not have the proper licenses for CTC connections, contact Avid Support.
2. The following tokens must be configured in /site/dict/words accordingly: o W_ACS_GATEWAY_HOST /10.129.156.98 o W_ACS_GATEWAY_PORT /9500 o W_SERVICE_REALM /<iNEWS system's name>
3. Modify the host section of the configuration file. Two lines are needed, as shown in bold below:
; HOSTS SECTION
;
host a a
servers 101 ; Mail
servers 105 106 ; Keyword
servers 110:112 ; Seek
servers 113 ; FTS index
servers 114 ; FTS search
servers 115 ; mediaindex
servers 200:219 ; Action servers
servers 300:399 ; Monitor servers
servers 400:419 ; Txnet
servers 500:599 ; Rxnet
reslist 620 ; websession
reslist 670 671 ; Console
reslist 680 681 ; com
Version 6.0 ReadMe
17
reslist 800:804 ; inws
reslist 900:901 ; api
reslist 902 ; inewsctc
;
....
api 900:901 - gnews -
;
ctc 902 - inewsctc - ; inewsctc
; END OF FILE
For iNEWS v5.4
File Link This version of iNEWS provides new functionality to support integration with a file server. This new functionality lets users upload small-sized files, such as PDFs, DOCs, or JPGs, to a file server and then include a download link to the file within an iNEWS story. For instance, a download link to something on the file server might look like this: http://fileserver/iNEWS/pressrelease.pdf
Clicking on such a link in a story downloads the file from the file server.
This integration requires configuration of both a file server and iNEWS.
Instructions for setting up a file server—which requires installing CentOS and Apache Tomcat and also configuring Tomcat WebDAV Access—is provided in a PDF, named Tomcat-Installation-FileLink.PDF. The PDF is located in the doc folder of the iNEWS installation distribution directory or CD for upgrading to iNEWS v5.4. Also in that folder is the tomcat script file, needed as part of the procedure.
The procedure required for configuring the iNEWS Server as part of file link integration is provided in this ReadMe.
To configure iNEWS for file linking:
1. Upgrade server software to iNEWS v5.4, which supports file link functionality. 2. The upgrade will add the tokens needed for file link to work in a couple of site dictionaries:
/site/dict/words and /site/dict/queues. However, you should ensure that the token definitions fit your system’s configuration. For instance:
Dictionary Token Description
/site/dict/words W_BINDFILESERVER /filelink-tomcat:8080 ; This setting should mirror settings on the file server (Tomcat)
W_FILESERVER_PATH //webdav/NEW ; This setting should mirror settings on the file server (Tomcat)
W_FILESERVER_TYPE /webdav ; This setting should mirror settings on the file server (Tomcat)
W_FILESERVER_USERNAME /webdavuser ; This setting should mirror settings on the file server (Tomcat)
W_FILESERVER_PASSWORD /webdavuser ; This setting should mirror settings on the file server (Tomcat)
Version 6.0 ReadMe
18
W_MAXFILESINDIR /500
W_MAXFILESIZE /819200
/site/dict/queues Q_FILELINKS /files
Note: For the more secure https connections, set W_BINDFILESERVER to /filelink-tomcat:8443 and W_FILESERVER_TYPE to /webdavs.
3. Verify also that the iNEWS Server(s) and the file server can “ping” each other successfully. 4. Upgrade iNEWS workstations with iNEWS v5.4 client software, which supports file link
functionality. 5. Create a new folder named FILES in the root iNEWS directory. 6. Verify that a new option called Insert File Link to Story appears in the context menu when right-
clicking in the story body.
For iNEWS v5.3
Clear AIR-DATE Column Option • A new Queue context (right-click) menu option, called Clear AIR-DATE column, is now available under
certain circumstances, which will allow users to clear data from the AIR-DATE field in the story form. It is also available as a Tools submenu option. This new menu option is enabled under the following conditions:
• The queue has the Refresh trait and all stories (in very long refresh queues) are finished loading.
• The user has write permission for the queue.
• There is an AIR-DATE field in the story form.
Clear AirDate will not clear locked stories or any stories for which the user does not have write permissions.
For iNEWS v5.2
Media | Index Integration • Beginning with the 5.2 version of iNEWS, integration between iNEWS and Media.Index is possible. Media
Index lets you search using a powerful and fast central index that works across multiple asset management systems, such as iNEWS, Interplay Production, and MAM databases. When integrating iNEWS with Media Index, the iNEWS system relies on the sync agent in the ftsindex program to push stories to Media Index. It must be configured to control what data gets indexed. For instance, the Media Index database trait (added as a new feature in v5.0) must be applied to directories and queues in the iNEWS database. You also must configure iNEWS to specify which Media Index the iNEWS system should use.
Note: All of the steps necessary to set up iNEWS to work with Media Index is provided in a new document called the Avid iNEWS and Media | Index Integration Guide, available as an addendum to the iNEWS v5.2 ReadMe, a downloadable PDF from the Avid website.
• The current implementation of Media Index does not honor iNEWS read permissions when searching and building the search results list. So any story from iNEWS with a read group assigned will be visible in search results to users who do not belong to the read group; however, those users will not be able retrieve the story from iNEWS because read group permission is checked by the iNEWS Server when retrieval is attempted.
Divehi Support • Avid iNEWS now supports Divehi with the new richedit control.
Version 6.0 ReadMe
19
To enable right alignment:
1. Open your “Region and Language” settings. 2. Change your format to Arabic, Divehi or Hebrew.
For iNEWS v5.1
New Form Field Types Field Type Description
VID-DURATION This editable field is required to allow duration data from iNEWS | Command to be included in show timing calculations. Video duration is added to RUNS-TIME by default only if RUNS-TIME is also in the form and does not contain user-entered information. When VID-DURATION included in the form, the duration of the primary video event is displayed when monitor server is loaded. It will appear empty if the monitor server is only turned on. If this field is excluded from the form, then the duration time is neither displayed nor included in show timing calculations. Also, VID-DURATION does not impact TOTAL-TIME if there is no RUNS-TIME field in the rundown.
Note: Avid iNEWS Command version 3.2 or later is required for proper integration with the VID-DURATION feature.
MOS-DEVICE This field is required to allow iNEWS to display the AMCPID of the MOS device. If added to the rundown’s form, when the monitor server is turned on, the status of the MOS item sent to the identified MOS device is displayed in the STATUS field of the rundown—even if the device is not the primary one listed in SYSTEM.MAP. The STATUS field displays either OK or ERROR depending on whether there are any errors in the production cues in stories of the rundown.
Note: For more information on forms and field types, see Chapter 8 entitled “Forms” in the Avid iNEWS Setup and Configuration Guide.
For iNEWS v5.0
Story Grouping • This version of iNEWS provides the ability to create story groups within a queue. For more information,
see the section called “Grouping Stories” in Chapter 8 of the Avid iNEWS User’s Guide.
Help System and User’s Guide • This version of iNEWS provides a new, fully updated help system, available in the Help menu of user
interface. Basic user information is also available via PDF in the new Avid iNEWS User’s Guide.
Messaging Enhancements • In this version of iNEWS, the existing Messaging feature has been enhanced to support longer text
messages and the new ability to recognize Story and URL links. For information, see the “Messages and Mail” chapter in the Avid iNEWS User’s Guide.
Version 6.0 ReadMe
20
Media | c • This version of iNEWS provides a new database trait (+mi | -mi) for queues and directories to be indexed
by the Media Index server, which may be used for search integration with other Avid products. For more information, see the chapter called “The Database: Directories, Queues, and Stories” and the section called “Database Traits Console Command Summary” in Appendix E of the Avid iNEWS Setup and Configuration Guide.
Changes between 5.6.1 and 6.0 • The iNEWS 6.0 release supports 255 Community members, up from 50. • This version now supports NSML 4.0 which has added UUID tags and “assignment” field. • In previous versions, using CTRL+Z or Edit > Undo on an iNEWS client to undo and edit caused all
hyperlinks in the story to lose their properties (and therefore were no longer underlined in blue) until the story was saved. This is fixed now. IN-2187
Changes between 5.6 and 5.6.1 • In previous versions, printing of a story that is last modified by MC|UX with SCRIPT style would hang if
WinBodyFontSize parameter was set to higher than 12. This is fixed now. IN-2225 • In previous iNEWS versions, the iNEWS sync agent did not pass indexes for other languages than EN to
mediaindex database. This is fixed now. IN-2300
Changes between 5.5 and 5.6 • In previous versions of iNEWS, rh6Install_rev_RH6-7.SH missed some rpms. This is fixed now. IN-2037
Changes between 5.4.1 and 5.5 • In previous versions, iNEWS workstation could error when user right click on a search queue in Projects
and try to create new toolbar button. This is fixed. IN-1843 • In previous versions, typing in iNEWS stories containing many, many hyperlinks could result in very
sluggish typing of new text. This is fixed. IN-1828 • In previous versions of iNEWS client, dragging and dropping text containing a production cue and then
using CTRL+E to save the story could sometimes result in removal of the production cue (grommet). This is fixed. IN-1537 and IN-1837
Changes between 5.4 and 5.4.1 • In previous versions, making selections in the Queue panel, using the mouse with the dropdown menu in a
combo box field, would not always be saved, especially in a queue with the Refresh trait. This is fixed. IN-1514
• In previous versions, the FTS index program did not work as it should for long name system (8 characters name). This is fixed. IN-1584
• In previous versions, there was issue with losing text entered in a sorted queue when a refresh happens. IN-1466 and IN-1476
Changes between 5.3.1 and 5.4 • In previous version, user could not copy-paste previous story version if to open it from Story -> Show
Versions menu. This is fixed. IN-1384 • In previous versions, select and then copy and paste of a line with a hard return would not paste the hard
return. This is fixed. IN-1334 • In previous versions, when logging in iNEWS the following random error might appear: "A networking
error occurred while checking the News Server version. Please try another server." This is fixed. IN-1444
Version 6.0 ReadMe
21
• In previous versions, killing stories in a story group caused the iNEWS workstation to crash when the General trait wasn’t assigned to the DEAD queue. This is fixed. IN-1477
• In previous versions, users could not drag and drop stories to Location shortcut buttons. This is fixed. IN-1481
• In previous versions, the iNEWS workstation could stop when local printing occurred in the following way: print an iNEWS story to a non-default Windows printer and then print the same or another iNEWS story to the default Windows printer by clicking on the Default button in the local print dialog. This is fixed. IN-1482
• In previous versions, iNEWS workstation could stop when a user was changing the Video ID in some story and selected the NO option when asked to confirm saving the story. This is fixed. IN-1484
• In previous versions, copying and pasting multi-byte, unicode characters from an iNEWS workstation to other Word processing applications could garble the characters. This is fixed. IN-1479
• In previous versions, when the Queue Reorder confirmation preference was enabled, and a user attempted to order a story group by clicking on a story in the group column, a “Can’t reorder queue” error would occur after the Reorder confirmation. This is fixed. IN-1519
• In previous versions, the Subject of an email message generated by an action server was limited to the first 20 characters of a queue's sort field (or quick index of the queue record) for the story being emailed. This has been changed so that the entire contents of the sort field are now used. IN-961
• Beginning in previous versions of iNEWS (v5.2.x and later), when \\localhost was put into an iNEWS story, it was no longer converted to a URL link. This is fixed. IN-1391
• In 5.x versions of iNEWS, the color vibrancy of toolbar buttons was lost compared to earlier versions. This is fixed. IN-1522
• In previous versions, the first attempt to paste copied text into a field in the Queue panel would not work if attempted immediately after login. This is fixed. IN-1518
Changes between 5.3 and 5.3.1 • In previous versions, FTSSEEK server could terminate while a user did raw query searches with Chinese
words and paragraph returns. This is fixed. IN-1268 • In previous versions, the mouse pointer flickered when opening a story with many production cues. This is
fixed. IN-1275 • In previous versions, a search would result in a communication error if the FTSSEEK server failed to
reconnect after the ftssearch service was restarted. This is fixed. IN-1331 • In previous versions, unloading and then reloading the monitor resulted in a delay of up to 20 seconds.
Now the reload occurs immediately. IN-1300 • The story form is now used when importing stories, previously exported using version of NSML prior to
NSML 3, to properly determine the field type of custom fields. IN-1302 • The delay interval for sending notifications via the msg server is now less than a second. IN-1328
Changes between 5.2.2 and 5.3 • LanguagesIn previous versions of iNEWS, there were semantic translation errors (Swedish) in client
software. This is fixed. IN-1744 • In previous versions of iNEWS, localized for Chinese, the client software would terminate on a double-
click of the search queue. This is fixed. IN-1752 • iNEWS now supports Ethopian Amharic Unicode font character font faces. Amharic is the national
language of Ethiopia which includes Arabic, Hebrew and Assyrian. Using a Keyman keyboard, can allow the user to maintain input in several local languages.
• Some additional French Canadian translation modifications were incorporated into this release. IN-1182
Media Indexing • In previous versions of iNEWS, Media Index logging was disabled when no FTS indexing was configured
and logging is redirected to a file. This has been fixed. IN-1112 and IN-1139
Version 6.0 ReadMe
22
In the new implementation, Media Index was decoupled from the FTS server agent, so that Media Index and FTS indexing operate independently; however, there is some configuration required to allow the Media Index server to function with iNEWS v5.3.
To configure iNEWS for Media Index with logging:
1. Edit the /site/config file. a. Add a media index server and its device number in the host section. b. Add the media index server and its device number to the SEEK and FTS SERVERS section.
For instance, add lines like what appears below in bold:
host abc b <section>
servers 105 ; keyword = 2
servers 113:115 ; seek = 5
servers 120 ; fts = 2
servers 122 ; media-index = 1
servers 200:207 ; action, distribution = 20
; SEEK & FTS SERVERS
;
server 113 seek 110 - ; seek server
server 114 seek 110 - ; seek server
server 115 seek 110 - ; seek server
server 120 ftsindex 120 - ; Fast Text Indexing
server 121 ftsseek 121 - ; Fast Text Search
server 122 mediaindex 122 - ; Media-Index
2. (Optional) Create the file to be written in the /tmp directory, which is needed for Media Index logging. a. Create the file /site/env/mediaindex. b. Add the following lines to the file you created:
DEBUG=7 DEBUGFILE=/tmp/mediaindex
3. Reconfigure the system. a. Select the master computer, which is typically server A. b. Enter superuser mode, using the current password. c. Take the system offline by typing: NRCS-A# offline d. Reconfigure the system by typing: NRCS-A# configure e. When the prompt reappears, bring the system back online by typing:
NRCS-A# online 4. Start the Media Index server.
a. Type: NRCS-A# start 122 b. Press Ctrl+D to leave superuser mode.
The pound sign (#) at the end of the console’s server prompt will change to a dollarsign ($). 5. Use the list command to check the device number by typing: NRCS-A# list c mediaindex
DEV DEVICE_TYPE COMPUTER NOTIFY OPTIONS DEVNAME
S122 mediaindex A 122
Note: Ensure the notify value of mediaindex is an unused device number.
Version 6.0 ReadMe
23
6. Create queue SYSTEM.MEDIA-INDEX and change this queues’ mailbox attribute; this attribute is usually a numerical value that matches the server’s device number. For instance, in this example, that number would be 122.
7. Apply the Media Index trait to every queue that must be indexed by Media Index service.
Monitor • Enhancements were made to this version of iNEWS to improve the start-up time for the monitor server,
reducing the time between turning monitor on and seeing the status reported on the Status bar at the workstation. Now, when you right click on the monitor status, the same dialog as the one invoked through the menu option will be displayed, allowing you to turn on, off, or load any device instead of only showing the status.
• Also, enhancement was made to the Monitor dialog to update the status if status changes while the dialog box is open.
iNEWS Client • In previous versions of iNEWS, some Combobox form fields would not retain selections. This has been
fixed. IN-1065 • In previous versions of iNEWS, the spell checker was able to modify production cues containing MOS
items, which could result in misspelled words on character-generated graphics. This has been fixed so that now, if MOS items are present in production cues, the spell checker is prevented from making modifications. IN-1012
• In previous versions of iNEWS, holding down SHIFT and ENTER while entering multiple MCS items in a production cue causes an unwanted asterisk (*) to appear in the NSML, which prevents the next MCS item after the asterisk from loading to the CG device. This has been fixed. IN-1201
• In 5.2.x versions of iNEWS, there were possible memory leaks relating to the Text Timing bar. This has been fixed. IN-1249
iNEWS Server • Previously, Event List and Composite List queues might not automatically refresh on users’ workstations.
This has been fixed. IN-1250 and IN-1247 • Previously, upgrading to iNEWS v5.x from earlier versions might cause problems with sending intersystem
messages because of added support in v5.x for long messages. This has been fixed. IN-1144
Changes between 5.2.1 and 5.2.2 iNEWS Client
• In previous 5.2.x versions of iNEWS, if the user preference “Confirmations / Delete / Production Cue” was turned on, some unrelated actions like cursor movement, selecting text could cause the system to prompt for confirmation of deleting a production cue. Also some macros with such actions could cause the client to lock up. This has been fixed. IN-1113
• In previous versions of iNEWS, if the user preference “Save Story Confirmation” is not turned on, modifying the date or time in a Calendar field of the story form isn’t retained if user leaves the story form before saving the story. This has been fixed. IN-1114
• Some additional French Canadian translation modifications were incorporated into this release. IN-1115
Changes between 5.2 and 5.2.1 iNEWS Server
• In previous versions of iNEWS, stopping or restarting a server (utility program) by its device number when it was not actually running would result in a T/U Index error. This has been fixed.
Version 6.0 ReadMe
24
• In previous versions of iNEWS, the SYSTEM.MAP stories were filtered by read permissions. This would result in inability to open the Titling dialog box by normal users. This has been fixed.
iNEWS Client • In previous versions of iNEWS, the client would stop if a non-superuser clicked the Display button in the
Manage User Accounts dialog box. This has been fixed.
• In previous versions of iNEWS, the client might crash if no dbmanager or umanager accounts existed and normal user opens User Preferences or the Queue Properties dialog box. This has been fixed.
• In previous versions of iNEWS, an error message would appear when attempting to assign the first field of a queue some field property other than editbox or checkbox. This has been fixed.
Localizations • In previous versions of iNEWS, there were problems with shortcuts in English, Finnish, and Swedish
localized versions. This has been fixed.
• Additional translation issues were addressed in this version localized to French Canadian.
Changes between 5.1.1 and 5.2 iNEWS Server
• In previous versions of iNEWS, corrupt UTF-8 sequence in a story could cause problems with FTS and the iNEWS workstation. This has been fixed.
• In previous versions of iNEWS, modifying stories with video items could cause adverse issue with the clip while the show is loaded, like advancing the timing bar. This has been fixed.
• Output format for list q-m and list q-dm has changed and now includes the modified-time column and another one formerly titled username, now called modified-by.
• The list c command has new options: list [options] configuration[-(-|r)] [<termid | name>...]
Use the list c-r command to view a list of devices/servers that are configured and should be running. Only devices configured on the iNEWS Server the command is entered on will be included in the list. If the device/server is running, it will include the process ID in the output. If you include any device numbers or names, such as list c-r fts, then the output will include all matching devices even if they are not on the iNEWS Server where the command was entered. For example:
NRCS-B# list c-r fts
DEV DEVICE_TYPE COMPUTER NOTIFY OPTIONS DEVNAME
S120 ftsindex B 120 running(6081)
S121 ftsseek A 121
Localization • In previous versions of iNEWS localized to French Canadian, there were several inaccurate translations in
the user interface. They have been fixed.
Version 6.0 ReadMe
25
Changes between 5.1 to 5.1.1 iNEWS Server
• In previous versions of iNEWS, when the video duration changed, the RUNS-TIME field would display the wrong value. This has been fixed so that all affected fields accurately reflect updates in duration.
Changes between 5.0 and 5.1 User Interface
• In previous versions of iNEWS, copying a selection of text would result in pasting the full body of text instead of the selected block of text. This has been fixed.
FTS • Enabling .Net Framework v3.5 is required prior to FTS installation on Server 2012 R2. You will need
Internet access or the Windows Install Medium to complete this procedure. Use the following procedure to turn on .Net Framework v3.5: 1. Navigate to Control Panels > Programs > Programs and Features.
2. Select the .NET Framework 3.5 as shown in the following illustration.
3. Click OK. Now .NET Framework v3.5 is enabled.
Version 6.0 ReadMe
26
iNEWS Server • In previous versions of iNEWS, following a software upgrade, users might experience sluggishness while
conducting standard editing tasks at the iNEWS Workstation. This has been fixed with new environment variable GBUFFERLIMIT set to a value of 4. The environment variable GBUFFERLIMIT can be added to the /site/env/gnews file to control how many buffers to allow. This can range from 1 to 4. If GBUFFERLIMIT is not present in /site.env.gnews, then 4 buffers are used. If GBUFFERLIMIT=0 or any numerical value not 1, 2, 3, or 4, then 4 buffers are used. Having GBUFFERLIMIT=1 results in using a single buffer which was the case prior to this change.
Changes between 4.7.1 and 5.0 User Interface
• In previous versions of iNEWS 4.x, right-click in body of new email did not pop up context menu offering copy or paste options. This has been fixed.
• In previous versions of iNEWS 3.x and 4.x, modifying manually entered CGs with 5-digit address ranges would sometimes alter graphics. This has been fixed.
• In previous versions of iNEWS, changes made to the duration field via Active-X or third-party server (such as GVG video server) while an iNEWS user was editing the story could result in displays of inaccurate time values when monitor is loaded or unloaded. This has been fixed.
Polling Action Servers • If an edit-locked story is inserted into a queue polled by an action server, and the lock is not released prior
to being polled, the story is deferred until the next poll. However, in iNEWS v4.7, if the lock was released between polls, the story would not be properly ordered into the same location as the story in the polled queue. This has been fixed.
Deko Select Interface • In iNEWS v4.7, copying part of a production cue and pasting it into Deko Select would result in the entire
production cue being pasted instead of only the selected part. This has been fixed.
Changes between 4.7.0 and 4.7.1 iNEWS Server
• The handling of invalid UTF8 sequences in a story was broken when the iNEWS Server was converted to a 64-bit application in iNEWS 4.7. This has been fixed.
• In previous versions of iNEWS, the dblock program was not functional; it always produced the message, “locatable coding error” and exited. This has been fixed.
Qualified Asian Languages and IMEs Korean
The following Korean IME (standard Windows IME) is tested and qualified:
• Korean Input System (IME 2002)
Known Issue – While the Korean-text queue navigation works correctly, the Go To > Destination menu option does not allow direct navigation to folders with Korean-text names.
Chinese Simplified The following Chinese Simplified (PRC) IME (standard Windows IMEs) is tested and qualified:
Version 6.0 ReadMe
27
• Microsoft Pinyin IME 3.0
• WangMa Wubi 86
• WangMa Wubi 98
Chinese Traditional The following Chinese Traditional IMEs (standard Windows IMEs) are tested and qualified:
• New ChangJie
• New Phonetic
• ChangJie
• Phonetic
• DaYi
The following Chinese Traditional IMEs (3rd party IMEs) have had minimal testing done and are not yet qualified or supported:
• Boshamy (WuXiaMi)
• Natural Input
Japanese The following Japanese IME (standard Windows IME) was tested and qualified:
• Microsoft Standard IME 2002 version 8.1
Vietnamese The standard Windows IMEs for Vietnamese (in Windows 7 and 8) are tested and qualified.
Microsoft Windows Critical Updates Avid recognizes that it is very important to be able to deploy Microsoft security patches to our Windows-based products as quickly as possible. We recommend that systems be kept up to date in order to maintain the highest level of security and encourage you to install all critical operating system updates provided by Microsoft.
In the unlikely event that one of these updates causes an issue, it is recommended that you uninstall the update and contact Avid customer support as soon as possible. Avid will investigate the incompatibility and if necessary, will provide a software update or work around to allow our products to properly function with the Microsoft update in question.
Known Issues and Limitations Divehi Support
• With the new richedit control, sometimes the last line of text will align to the left for a right-aligned story.
Chinese Localization Issue • Chinese input method DaYi cannot be used to create new queues or folders.
Version 6.0 ReadMe
28
German Localization Issue • Using Ctrl+Shift+Right Arrow incorrectly marks a word if that word begins with a German Umlaut (ä, Ä,
ö, Ö, etc.) a diacritic symbol over vowels, regardless of case.
Local Database • To download print styles and story forms to your local computer for use when working offline, you must
have Read Access to the iNEWS System directories where styles and forms are located. This is by design.
Windows 7 and Windows 8 with UAC Enabled • When User Access Control (UAC) is turned on, users cannot drag-and-drop text from an outside
application, such as Microsoft Word, into iNEWS. Workaround:
• Use Ctrl+C and Ctrl+V to copy and paste the text between applications.
External Users (LDAP) • Beginning with version 4.x, Avid iNEWS server allows user authentication via Windows Active Directory;
however, external users are not compatible with the following clients:
• iNEWS Workstations earlier than 4.0.0
• FTP clients: teleprompters, NewsCutter’s NRCS Tool
• COM clients: NewsCutter's NRCS Tool; Instinct; MOS Gateway's roStorySend and mosObj.
• Web Client
• Web Access
• Interplay Central client earlier than 1.3.0
Plug-ins • Some plug-ins, such as AMG Journalist, will not paint correctly in iNEWS.
Workaround:
To resolve the painting problem issue, use the following procedure.
Note: AMG Journalist is used in the procedure as a plug-in example.
1. In the iNEWS executable directory, create a new text file named ActiveXRedraw.txt. • For 64 bit workstations, the directory is located at: C:\Program Files (x86)\Avid\iNEWS\ • For 32 bit workstations, the directory is located at: C:\Program Files\Avid\iNEWS\
2. Open the registry editor, using regedit in the Run dialog box. 3. Select Edit > Find > AMG Journalist and locate the CLSID for the plug-in.
• For 64 bit workstations, the CLSID is located at: Computer\HKEY_CLASSES_ROOT\Wow6432Node\CLSID\
• For 32 bit workstations, the CLSID is located at: Computer\HKEY_CLASSES_ROOT\CLSID\
Version 6.0 ReadMe
29
4. Take the CLSID, which is the folder name, and put it into the ActiveXRedraw.txt file.
5. Save the file. 6. Reload iNEWS. The painting problem for plug-ins like AMG Journalist will be resolved.
UNC Paths • As a result of the server-side URL changes in iNEWS 3.4.2, UNC paths with spaces no longer work
correctly in the iNEWS client software. In a future version of the iNEWS client software, these links will be client-only, allowing a user to launch them from the iNEWS Workstation without saving them as URLs on the iNEWS Server.
• iNEWS integration with Intelliscribe printing should be configured at 300 DPI with "Enhanced Features" disabled. Setting a higher DPI or enabling enhanced features can cause long delays in printing.
• There are screen painting issues when the Vertigo Xmedia plug-in and the Aurora Assignment List plug-in (version 7 or later) are both installed on the same client. The Xmedia splash screen can cause the Xmedia tree to be inaccessible. Workaround: When this issue occurs, the workaround is to rename or remove skinCrafter3_vs2008.dll from the Assignment List installation directory.
iNEWS Web Services API • The iNEWS Web Service API cannot be undeployed via the Tomcat management interface when Tomcat is
running on a Windows host.
To undeploy in Windows:
1. Stop the Tomcat service
2. Delete the inewswebservice file and folder from the Tomcat webapps directory.
3. Place the new .war file into the webapps directory.
Version 6.0 ReadMe
30
4. Start the Tomcat service.
Note:Undeployment through the management interface works correctly if the Tomcat service is running on a Linux host.
Multiple Monitors • If running the iNEWS client software on a dual monitor workstation, there are some key issues you could
encounter:
• If the application is maximized when closed, it will be maximized on the primary monitor when it is reopened, regardless of which monitor it was on when closed.
• Moving a user from a dual monitor machine to a single monitor machine, such as an undocked laptop, could result in the application opening to a screen that no longer exists. Workaround: Right click on iNEWS in the Windows taskbar and select Move. Then press one of the arrow keys on the keyboard; this will lock the application’s window to the mouse. You can then move the mouse pointer onto the screen and the iNEWS main window will move with it.
Macros and Keystrokes • Some PCs, when upgraded from Internet Explorer 6 to Internet Explorer 7 or 8, will experience issues with
macros that perform several functions in rapid succession; the macros might not complete all assigned activity in iNEWS. Avid is working with Microsoft on this issue, which is most apparent with macros that trigger the Local Print dialog box or the User Preferences dialog box.
Workaround: Place the name of the dialog box after the K_WINDOW token value immediately following the keystroke that opens the dialog box. For instance, instead of just {ctrl p} to open the Local Print dialog, the macro should be: {ctrl p}{window Local Printing}. The text following ‘window’ must match exactly the name of the dialog box as it appears in the title bar. The ‘K_WINDOW /window’ token can be changed in /site/dict/keymacros.
Another available workaround is to add {pause <#>} statements of one or two seconds to problem macros at the point in the macro where activity ceases. In the example of the Local Printing macros, the pauses are likely needed when typing a name of a printer or changing a print style.
Technical Support Information Most products feature a number of coverage options. Avid Assurance service offerings are designed to facilitate your use of Avid solutions. Service options include extended telephone coverage, automatic software maintenance, extended hardware warranty, and preferred pricing on replacement parts. Offerings and options may vary by product and are not available for all products.
For more information regarding Avid service offerings, visit www.avid.com/support or call Avid Sales at 800-949-AVID (800-949-2843).
Program availability and details might vary depending on geographic location and are subject to change without notice. Contact your local Avid office or your local Avid Reseller for complete program information and pricing. However, if you need help locating an Avid office or Avid Reseller near you, please visit www.avid.com or call in North America 800-949-AVID (800-949-2843). International users call 978-275-2480.
Accessing Online Support Avid Online Support is available 24 hours per day, 7 days per week. Search the Knowledge Base to find answers, to view error messages, to access troubleshooting tips, to download updates, and to read/join online message-board discussions.
Version 6.0 ReadMe
31
To access Avid Online Support:
Go to www.support.avid.com .
Note: Supplemental documentation for this release, if available, is provided on the Knowledge Base. For the latest up-to-date information, browse the Knowledge Base at Avid Online Support.
Version 6.0 ReadMe
32
Copyright and Disclaimer
Product specifications are subject to change without notice and do not represent a commitment on the part of
Avid Technology, Inc.
The software described in this document is furnished under a license agreement. You can obtain a copy of that
license by visiting Avid's Web site at www.avid.com. The terms of that license are also available in the
product in the same directory as the software. The software may not be reverse assembled and may be used or
copied only in accordance with the terms of the license agreement. It is against the law to copy the software
on any medium except as specifically allowed in the license agreement.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose without the express written permission of
Avid Technology, Inc.
Copyright © 2016 Avid Technology, Inc. and its licensors. All rights reserved.
Attn. Government User(s). Restricted Rights Legend
U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or
“commercial computer software documentation.” In the event that such Software or documentation is acquired by
or on behalf of a unit or agency of the U.S. Government, all rights with respect to this Software and
documentation are subject to the terms of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS
§227.7202-1(a), as applicable.
Trademarks
Adrenaline, AirSpeed, ALEX, Alienbrain, Archive, Archive II, Assistant Avid, Avid Unity, Avid Unity ISIS, Avid
VideoRAID, CaptureManager, CountDown, Deko, DekoCast, FastBreak, Flexevent, FXDeko, iNEWS, iNEWS Assign, iNEWS
ControlAir, Instinct, IntelliRender, Intelli-Sat, Intelli-sat Broadcasting Recording Manager, Interplay, ISIS,
IsoSync, LaunchPad, LeaderPlus, ListSync, MachineControl, make manage move | media, Media Composer, NewsCutter,
NewsView, OMF, OMF Interchange, Open Media Framework, Open Media Management, SIDON, SimulPlay, SimulRecord,
SPACE, SPACEShift, Sundance Digital, Sundance, Symphony, Thunder, Titansync, Titan, UnityRAID, Video the Web
Way, VideoRAID, VideoSPACE, VideoSpin, and Xdeck are either registered trademarks or trademarks of Avid
Technology, Inc. in the United States and/or other countries.
All other trademarks contained herein are the property of their respective owners.
Avid iNEWS v6.0 ReadMe • 9329-65312-04_F • 21 December 2016
This document is distributed by Avid in online (electronic) form only, and is not available in printed form.
![Readme [EN]](https://img.pdfslide.us/doc/110x75/5695cfc81a28ab9b028f82a1/readme-en-56d9ceec2a6b8.jpg)
