Embed Size (px)
Citation preview
v e n t i l a t e d f a c a d e
ROOM fOR iMaGinatiOn
The technical performances of the gigantic sized RAK Ceramics Maximus slabs are the perfect solution for the external cladding of buildings. High resistance, light weight, easy to install and maintain, with a high aesthetic and energy value that enhance the building industry.
Our designers and engineers have worked on some of the most iconic projects in the world, giving priority to client requirements to ensure maximum architectural flexibility and cost-efficiency. We bring forth latest and the best trends in the facade design industry with the definitive aim to change the way buildings are viewed, both aesthetically and technologically.
We design and supply personalized facade systems accommodating everything from the edge of the building to the exterior face of the facade panels.
We offer complete and approved facade systems including all the substructure, fixing and sealing components.
v e n t i l a t e d f a c a d e
Facade: Uni Hyper White and Uni Dark black
76 RAK CERAMICS | 2019
Facade: Behind Grey
98 RAK CERAMICS | 2019
Facade: Portovenere Marble
1110 RAK CERAMICS | 2019
Facade: Basaltina Grey
1312 RAK CERAMICS | 2019
A ventilated curtain wall is a facade system composed of several layers, in which the supporting external wall is provided with a layer (cladding) that offers protection against the weather. The cladding can be made from a wide variety of materials: ceramic, metal, fibre cement, composite panels, natural stone etc. The substructure attaches this façade cladding to the solid outer wall of a building while leaving a gap between the two.
Ventilated Curtain Walls are acknowledged as one of the most sustainable, cost-effective, and technologically advanced facade systems. On top of their outstanding structural and physical advantages, VCWS offer architects a virtually unlimited range of possibilities for creating striking designs.
The Ventilated Curtain Walls System (VCWS)
f a c a d e S U B S t R U c t U R e S Y S t e M S a n d c O M P O n e n t S .
1514 RAK CERAMICS | 2019
This section presents two VECO Facade Substructure Systems used as fastening options for Ceramic Panels.
VECO-A-2000 - Invisible Fastening with Under-cut Anchors
VECO-A-1020 - Visible Fastening with Stainless Steel Clips
1716 RAK CERAMICS | 2019
System: This system is used as a horizontal mounting system for invisible facade fastenings in
combination with under-cut anchors.
Type of cladding: Large and small format Ceramic panels
Type of fastening: Invisible fixation with under-cut anchor
1
2
3
4
5
7
9
8
10
6
Thermo-stops Wall Bracket Fixed Point
Wall Bracket Sliding Point Wall Anchors
Vertical Profiles
Self drilling screws Agraffe + Horizontal Profile
Agraffe with Fixing &
Adjusting Screw
KEIL Undercut Anchors
1 2
3 4
5
7 8
9 10
Spring clip for brackets
6
Mockup of Ceramic Panels installed using GIP VECO-A-2000 Substructure System
Vertical Aluminium Substructure with L-Profiles and Horizontal Agraffe Profile
This system is used as a horizontal mounting system for invisible facade fastenings in combination with under-cut anchors.
VECO-A-2000 system components are made from an aluminium alloy of the type EN-AW-6063T66 and are sup-plied in a variety of sizes to meet the specific static and structural requirements of the project.
ventilated
facadeS VeCO-a-2000 Invis ible Fastening with Under-cut Anchors
1918 RAK CERAMICS | 2019
1 - Thermo-Stop plates are placed to prevent contact between the brackets and the wall of the building.
2 & 3 - VECO-A system brackets are made from an aluminium alloy of type EN-AW-6063T66 and are supplied in a variety of sizes to meet the specific static and structural requirements of the project. The brackets can be used universally as fixed point or sliding point fastenings. Using the corresponding components, the length of the bracket is also infinitely adjustable and can therefore be adapted to the tolerances of the external wall of the building.
4 - Wall Anchors: Mechanical Anchor to fix the brackets to the wall substrate.
5 - Vertical Profiles :
L-Profile from Extruded Aluminium Alloy EN AW-6063T66 (used in central supports &
connection applications)
T-Profile from extruded Aluminium Alloy EN AW-6063T66 (used in area of joints)
6 - Spring clip made from spring steel 1.4310 used to aid installation
7 - Self Drilling Screws: Self drilling screws made from stainless steel A2 and A4 for fastening of horizontal profiles to brackets and vertical profiles
8 & 9 - There are 3 types of Agraffes: (Rigid)/ (Adjustable)/(Adjusting +Fixed). The components used with them are adjusting screws, self drilling screws and self-adhesive foam rubber.
10 - The KEIL undercut anchor for the hidden attachment of thin panels is made from stainless steel. Its geometry which matches the KEIL undercut drill hole, guarantees a positive locking attachment free from expansion pressure in all panel materials from a panel thickness of 6mm onwards. Different insertion depths are possible depending on the thickness of the panel.
Substructure Components aluminium Substructure with Vertical Profiles and Horizontal agraffe Profile
Thermo-stops Wall Bracket Fixed Point Wall Bracket Sliding Point Wall Anchors Vertical Profiles
Self drilling screw Agraffe + Horizontal Profil KEIL Undercut Anchors
1 2 3 4 5
7 8 9 10
Spring clip for brackets
6
Agraffe with Fixing &Adjusting Screw
1 Thermo-stop
2a Wall Bracket Fixed Point
2b Wall Bracket Sliding Point
3 Wall Anchor
4 Thermal Insulation
5 Vertical Profile
6 Horizontal Channel
7 Agraffe incl. foam rubber (adjustable / rigid) + adjusting screw
8 KEIL Under-cut Anchor
9 Ceramic Cladding
VERTICAL SECTION
1 2 3 4 5 6 87 9
1
2
3 4
5 67 89
4
1
2b
5
3
7
6
8
9
2a
HORIZONTAL SECTION1
2a
3
4
5
7
8
6
9
ventilated
facadeS VeCO-a-2000 Invis ible Fastening with Under-cut Anchors
2120 RAK CERAMICS | 2019
Corner Details
INNER CORNEROUTER CORNER
Exploded Axonometric
Typical Fixing Detail of Ceramic Panels with giP-VeCO-a-2000 System using Under-cut Anchors
Date:
Sheet
Drawing No:
Scale
Notes:
Tel: +971 4 2773772Fax: +971 4 3683473
www.fapinex.comP.O. Box 336558, DubaiMotor City, Detroit House 9th Floor, Office 912
DESIGNED BY:
DRAWN BY:
B B
A
AELEVATION SCALE 1:12
SECTION A-A SCALE 1:12
SCALE 1:12SECTION B-B
Detail 1SCALE 1:4
Detail 1Fix Point BracketAdjusting Screw
GIP-Profile Agraffe
KEIL Under-Cut Anchor
Horizontal Channel GIP-Profile
Detail 2SCALE 1:4
1200
6
1200
600
660
06
600
660
0
Slide Point Bracket
Typical Fixing Detail ofUnder-Cut with GIP- VECO
2000 System
1 Thermo-stop
2 Fixed/Sliding Point Brackets
3 Wedge Anchor BZ 10/30 M10 A4
4 Spring Clip For Bracket
5 Veco L-Profile
6 Self-Drilling Screw
7 GIP Profile Agraffe
8 GIP Profile Agraffe with Fixing Screw
9 GIP Profile Agraffe with Adjust ment Screw
10 KEIL Under-cut Anchor Type KHAA
11 Ceramic Cladding
VeCO-a-2000 Invis ible Fastening with Under-cut Anchors
ventilated
facadeS
2322 RAK CERAMICS | 2019
giP VeCO-a-1020 Vis ible Fastening with Stainless Steel Cl ips
System: Vertical Aluminium substructure with L-and T-profiles and ceramic clips
Type of cladding: Large and small format Ceramic panels
Type of fastening: Visible fixation with clips
Mockup of Ceramic Panels installed using GIP VECO-A-1020 substructure system
Vertical Aluminium Substructure with L and T-Profiles and ceramic clips
This system is used as a vertical mounting system for visible facade fastenings with ceramic clips.
VECO-A-1020 system components are made from an aluminium alloy of the type EN-AW-6063T66 and are supplied in a variety of sizes to meet the specific static and structural requirements of the project.
Thermo-stops Wall Bracket Fixed Point
Wall Bracket Sliding Point Wall Anchors
Vertical Profiles
Self drilling screws Ceramic Clips with accessories
Spring clip for brackets
1 2
3 4
5
7 8
6
Thermo-stops Wall Bracket Fixed Point Wall Anchors
1 2
Wall Bracket Sliding Point
3 4
Self drilling screws Ceramic Clips with AccessoriesVertical Profiles
5 7 8
Spring clip for brackets
6
1 - Thermo-Stop plates are placed to prevent contact between the brackets and the wall of the building.
2 & 3 - VECO-A system brackets are made from an aluminium alloy of type EN-AW-6063T66 and are supplied in a variety of sizes to meet the specific static and structural requirements of the project. The brackets can be used universally as fixed point or sliding point fastenings. Using the corresponding components, the length of the bracket is also infinitely adjustable and can therefore be adapted to the tolerances of the external wall of the building.
4 - Wall Anchors: Mechanical Anchor to fix the brackets to the wall substrate.
5 - Vertical Profiles :
L-Profile from Extruded Aluminium Alloy EN AW-6063T66 (used in central supports &
connection applications)
T-Profile from extruded Aluminium Alloy EN AW-6063T66 (used in area of joints)
6 - Spring clip made from spring steel 1.4310 used to aid installation.
7 - Self Drilling Screws: Self drilling screws made from stainless steel A2 and A4 for fastening of horizontal profiles to brackets and vertical profiles.
8 - Stainless Steel Coated Ceramic Clips / Ceramic Clips Accessories including ceramic clips plate, rivets and rubber.
ventilated
facadeS
1
2
3
5
7
8
6
4
2524 RAK CERAMICS | 2019
Vertical Aluminium Substructure with L- and T-profiles and ceramic clips
1 Thermo-stop
2a Wall Bracket Fixed Point
2b Wall Bracket Sliding Point
3 Wall Anchor
4 Thermal Insulation
5 Vertical Profile
6 Ceramic Clips with Accessories
7 Ceramic Cladding
1
5
3 2
76
4
5
3
2a
1
6
7
4
HORIZONTAL SECTION
1 2 3 4 5 6
VERTICAL SECTION
1
2a
3
4
5
6
7
2b
Corner Details
INNER CORNER
OUTER CORNER
giP VeCO-a-1020 Vis ible Fastening with Stainless Steel Cl ips
ventilated
facadeS
RAK CERAMICS
P.O. Box 4714, Ras Al Khaimah,
United Arab Emirates (U.A.E.)
Tel.: +971 7 2467000
Fax: +971 7 2445270
Email : [email protected]
RAK CERAMICS
RECOMMEnDED PARTnER
FOR VEnTILATED FACADE :
rAkCErAmiCS.COm
RakceRaMicS.cOM
RE
F: V
En
TIL
AT
ED
FA
CA
DE
6/2
019
V 1
.0
