VARIOUS MANUAL GUN MODELS AVAILABLE. POSSIBLE TO CHOOSE A PRODUCT TO MEET THE NEED.

MANUAL POWDER COATING EQUIPMENTS

ELECTRO STATIC POWDER COATING EQUIPMENT

GX8500 SERIES MANUAL GUN MODEL

IONICS DEPT.

GX8500CS　Cup Stand Unit

GX8500C　Cup Gun Unit

GX8500S-TTwin Hand Gun Unit（GX8500B-T and GX8500K-T Available.）

GX8500SStandard Unit of Manual Type

GX8500B　Unit for Multicolor Powder

GX8500K　Agitator Type Unit（Small Output Available.）

Unit Type GX8500S/GX8500S-T GX8500B/GX8500B-T GX8500K/GX8500K-T GX8500CS/GX8500C

Equipped Gun GX131 GX131 GX131 GX131

Powder Feeder Fluidized Bed Hopper Powder Box Agitator Hopper Cup

Hopper Capacity 60 Lit. - 30 Lit 380cc/500cc

Gun Cable Length 7 m （Connectors on both sides） 7 m （Connectors on both sides） 7 m （Connectors on both sides） 7 m （Connectors on both sides）

Max. 250 g/min. （Hose I.D. 9.5 mm） Max. 250 g/min. （Hose I.D. 9.5 mm） Max. 250 g/min. （Hose I.D. 9.5 mm） Max. 250 g/min. （Hose I.D. 9.5 mm） Max. 450 g/min. （Hose I.D. 12mm） Max. 450 g/min. (Hose I.D. 12mm） Max. 450 g/min. (Hose I.D. 12mm） Max. 450 g/min. （Hose I.D. 12mm）

Dimensions （W × L × H） 600 × 743 × 1070（mm） 600 × 743 × 1070（mm） 685 × 500 × 1110（mm） 200 × 200 × 250（mm）Equip. Weight 45 kg/ 51 kg 47 kg/ 53 kg 56 kg / 62 kg 10 kg / 8 kg

Power Consumption 90 VA 120 VA 140 VA 90 VA

100VAC - 240 VAC, 50/60 Hz 100VAC - 240 VAC, 50/60 Hz 100VAC - 240 VAC, 50/60 Hz 100VAC - 240 VAC, 50/60 Hz

180 Nlit/min, 0.5 MPa 150 Nlit/min, 0.5 MPa 140 Nlit/min, 0.5 MPa CS: 200 Nlit/min, 0.5 MPa,

C: 140 Nlit/min., 0.5 MPa

Maximum PowderOutput

Power Requirements

Air Consumption/Pressure

NIHON PARKERIZING CO., LTD. IONICS DEPT.● Informations in this catalogue is subject to change without notice.　● Please read the manual before using the equipment and use the equipment properly.

IONICS DEPT.14-6, Sakaecho 2 chome, Funabashi-shi, Chiba, 273-0018, Japan TEL. +81-47-434-5008 FAX. +81-47-434-3732HIGASHI NIHON SALES - IONICS TESTING LABORATORY14-6, Sakaecho 2 chome, Funabashi-shi, Chiba, 273-0018, Japan TEL. +81-47-434-3745 FAX. +81-47-434-3732NISHI NIHON SALESHiroshibacho 11-41, Suita-shi, Osaka, 564-0052, Japan TEL. +81-6-6386-3584 FAX. +81-6-6386-3340CHUKYO BRANCHMomozonocho 4-18, Mizuho-ku, Nagoya-shi, Aichi, 467-0855, Japan TEL. +81-52-388-7013 FAX. +81-52-824-1803OVERSEAS MARKETING14-6, Sakaecho 2 chome, Funabashi-shi, Chiba, 273-0018, Japan TEL. +81-47-434-5061 FAX. +81-47-434-3732

1205500EX

Design for preventing puffing. Simple construction makes easy cleaning.

High Performance Injector

Easy to replace gun cable due to having a connector at the both ends.

Gun Cable

StandardPinch Valve

Adjusting powder output on hand.

Remote Control Switch

Option

It improves the response of ON/OFF and makes Air Cleanig quick.

GX8500 SERIES

Comparison of Charge to mass ratio

Pulse Ⅱ charge

Continuously charge (other company method)

Powder Output （g/min.）

Charge to mass ratio（uC/g）

35025015050 3002001000

400

250

100

350

200

50

300

150

0

GX385 DIGITAL CONTROLLER

Clear LED Indicator, Excellent operability.

Current / pressure feedback control comes true the stable coating.

New software makes max. 50 recipes, stable operation and speed-up possible.

Pulse Power Ⅱ makes Excellent Penetration possible.

Easy to operate withdirect switch

One touch programselect switch

Pulse Power/Standard Corona select switch

Built-in Pressure Sensor

Switchable Flow rate control / Pressure control

With Ion trap (option) makes coating decorative

< Pulse PowerPatent is registered.>

High Voltage Source Generator built in gun main body

Input Voltage Max. 24V （Effective Value）Applied Voltage Max. 100kV （Polarity : Negative）

Short Circuit Current 100μAWeight 520g Bottom of the gun

Gun Grip 2 sizes availble to choose

Excellent penetration for corner of inside box.

Less powder blowing off even if spraying from close position.

Less powder accumulation on the Bottom of inside box.

Easy to replace gun cable due to having a connector at the both ends.

GX131 ELECTRO STATIC POWDER COATING GUN

K type Nozzle

Long Barrel Nozzle

Option Nozzle

It is suitable for painting narrow parts due to the fixed pattern.

Slit Nozzle （ET） Spray pattern looks like fan shape. Excellent Penetration.

Adjustable spray pattern with moving the ring position.

Slit Nozzle

Pattern Ring （option）

Diffuser （option）

Round spray pattern is formed. Diameter of spray pattern can be adjusted with the different diffuser (option).

Diffuser Nozzle

GX131 Nozzles

Standard : O.D. 16mm

φ22φ20φ10

116L300L500L

1000L

It is possible to spray close toa part due to soft spray.

It is suitable for coating for inside of boxes, inside of pipes.

Connecting Position for Gun Cable and Powder Hose

Gun NozzleSlit Nozzle, Diffuser NozzleOption : Long Barrel Nozzle

※ in case of output 100% when the primary air pressure is 0.5 MPa

Primary Air Pressue（MPa）

Output（%）

0.60.50.4 0.650.550.450.35

120

105

90

115

100

85

110

95

80

Total Air Volume Control

PowderFM + FS

SettingIndicator feedback control

FM Motor Valve

FS Motor Valve

FM + FS = Fixed

controller

FS Pressure Sensor

FM Pressure Sensor

Primary Pressure Variation and OutputGX385 Pressure Control

Tipical Regulator