)    CREATION OF CHARECTERSTICCharecterstic ZBAG Created . 

 All Combination are maintained here as values for charecterstic. 

  Now Variant Charecterstic ZPRICE created 

In additional data Tab maintain Table name SDCOM field VKOND 

    2) CREATION OF CLASS

In varient configuration we use class to group the charecterstic that describe the configuirable material. We need to links class to configurable material so that we allow material to be configured by using charectersitc of classes. Class have different types here class type 300 ( Varients) supports Variant configuration.Create Class T code CL01Enter Class name, class type as 300 

 then assign Both charecterstic to class ZSA 

3)    CREATION OF CONFIGURABLE MATERIAL Material with different charecterstic or feature and option is know n as Configurable material.

 Configurable material either created in material type KMAT or they are given indicator configurable material in material master basic data-2. Item catagory Group will be 0002Class type 300 Create material and assign class type 300 to it, then assign class ZSA to material. Material Code – TEST-VC 

   4.CREATION OF CONFIGURATION PROFILE. T CODE CU41 Each configurable object must have configuration profile, it controls the configuration process in sales order.

We maintain the configuration profile for the configuration object to define the central setting for the configuring the object, we can control all the option display object and scope of charecterstic on the value of assignmenet screen.  

Enter priority , profile name, class typeselect profile click on go to --- profile detail then config intital screen select process as SALES ORDER (SET) AND BOM APPLICATION ASSD01 DEPENDENCY It describe the inter dependency between charecterstic and its value and it control which componenet are to be selected from bill of material. Use- In VC , we use dependency to control combination of varinets. This prevent combination of varinets whihc are not allowded.Dependency also select exactly the right BOM component and operation to produce variant.  There are 2 ways to create dependency

1)    T code CU012)    we can directly create dependency in charectersitc it self

Go to transection CT04—select value-- Extra--- Object dependency—editor.

DEPENDENCY EDITOR.

Repeat procedure for all above values if required.    4)PRICING AND CONDITION RECORD. In  T Code VK11 we need to maintain condition record for basci price of the material  for the condition type PR00. Same here VK11 we need to maintain condition record for all charectersticsvalues . In the condition type VA00.  Maintain pricing for each varient.

 

5)    CREATION OF SALE BOM. Create Material master for each componenet required.T Code -CS01enter Material – TEST-VC, Plant , and BOM usage as 5in initial screen enter BOM componenet and quantities. 

 Select Component go to Extra--- Object Dependency--- Editor select dependecny type Selection Conditionand Enter Syntax

 

          

6)    SALES ORDER CREATIONT CODE-VA01

CHARECTERSTIC VALUE ASSIGNMENT. 

  For Charecterstic BAG SA value 1 selected which is liner so system picked variant condition as 1. 

system will pick item catagory as TAC and shedule line catagory CP.As per varient value selection system explodes the sales order BOM and picksBOM componenet which will be used. 

 Price Calculation. 

7)    CONSUMPTION OF COMPONENT.      T CODE -MB1A 

 9)    DELIVERY CREATION

 

PGI done.