Valves - Conex Banninger Media - Press...10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510 Lever Handle Version: 1260 - 1/2" - 2" Valves Range 1260 QT

Valves

Material Specification

No Component Material Specification 1 End Connector Brass - Chrome Plate BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body Brass - Chrome Plate BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N - DW 9 Lever Handle Steel +PVC EN 24T + PVC 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510

Lever Handle Version: 1260 - 1/2" - 2"

Valves Range 1260 QT Ball Valve PN25 – Red Lever – Short Series

Valves Valves Range: 1260 QT Ball Valve PN25 – Red Lever – Short Series

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1260 x 3 3 3 3 x x x x

Valve Suitability

1260 Temp (°C) Bar psi Water -10°C to + 120°C PN25

Max. working parameters

Specification Clause:

Brass Body, Stem and Cap suitable for potable water.

Chrome plated Brass ball.

PTFE seats and stem seal.

Quarter Turn, Tight Shut-off.

Lever operated.

This valve is not suitable for use on Group 1 Gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.

End connections to BSEN 10226.

This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.

Features and Benefits:• Full bore quarter turn ball valve.

• Blow out proof stem.

• Thread connections to BS EN 10226 (ISO7).

• Approved for drinking water applications.

Ball Valve - 1260

Lever Handle Order Code

BS EN 10226 (ISO 7) threadSize DN A B C

Weight (kg)

126013RRR250404 1/2" 15 50 48 95 0.186126013RRR250606 3/4" 20 58 52 95 0.264126013RRR250808 1" 25 69 65 130 0.462126013RRR251010 1 1/4" 32 81 69 130 0.614126013RRR251212 1 1/2" 40 89 80 160 0.938126013RRR251616 2" 50 110 88 160 1.450

Valves


No Component Material Specification 1 End Connector Brass - Chrome Plate BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body Brass - Chrome Plate BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N 9 Tee Handle Aluminium EN 1706 LM6 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510

Tee Handle Version: 1265 - 1/2" - 1"

Valves Range 1265 QT Ball Valve PN25 – Red Tee – Short Series

Valves Valves Range: 1265 QT Ball Valve PN25 – Red Tee – Short Series

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)

1265 x 3 3 3 3 x x x x

Valve Suitability








Tee operated.






• Thread connections to BS EN 10226 (ISO7).


Ball Valve - 1265

Tee Handle Order Code


Weight (kg)

126513RRT250404 1/2" 15 50 38 95 0.162126513RRT250606 3/4" 20 58 42 95 0.244126513RRT250808 1" 25 69 50 130 0.420

Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N - DW 9 Lever Handle Steel EN 24T + Polyethylene HD 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1200 QT Ball Valve PN25 – DZR Red Lever

Valves Valves Range: 1200 QT Ball Valve PN25 –DZR Red Lever Tee


1200 3 3 3 3 3 x x x x

Valve Suitability

1200 Temp (°C) Bar psi

Water -10 to 120°C PN25



DZR Brass Body, Stem and Cap suitable for potable water, LTHW and chilled systems.




Lever operated.






• Full DZR construction.

• Threads to BS EN 10226 (ISO7).


• Unique Conex Bänninger lever handle.

• Suitable for LTHW and chilled systems.

Ball Valve - 1200



Weight (kg)

120050RRR250404 1/2" 15 55 48 95 0.208120050RRR250606 ¾" 20 65 52 95 0.332120050RRR250808 1" 25 78 65 13 0.602120050RRR251010 1 ¼" 32 91 69 130 0.927120050RRR251212 1 ½" 40 99 80 160 1.362120050RRR251616 2" 50 119 88 160 2.224

Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N 9 Tee Handle Aluminium EN 1706 LM6 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1205 QT Ball Valve PN25 – DZR Red Tee

Valves Valves Range: 1205 QT Ball Valve PN25 –DZR Red Tee


1205 3 3 3 3 3 x x x x

Valve Suitability

1205 Temp (°C) Bar psi Water -10 to 120°C PN25







Tee operated.










Ball Valve - 1205



Weight (kg)

120550RRT250404 1/2" 15 55 38 95 0.187120550RRT250606 ¾" 20 65 42 95 0.332120550RRT250808 1" 25 78 50 13 0.590

Valves


No Component Material Specification 1 End Connector Brass BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body Brass BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N - DW 9 Lever Handle Steel EN 24T + Polyethylene HD 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1210 QT Ball Valve PN40 – Red Lever

Valves Valves Range: 1210 QT Ball Valve PN40 – Brass Red Lever


1210 3 3 3 3 3 x x x x

Valve Suitability








Lever operated.









Ball Valve - 1210



Weight (kg)


Valves


No Component Material Specification 1 End Connector Brass BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body Brass BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N 9 Tee Handle Aluminium EN 1706 LM6 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1215 QT Ball Valve PN40 – Red Tee

Valves Valves Range: 1215 QT Ball Valve PN40 – Red Tee


1215 3 3 3 3 3 x x x x

Valve Suitability








Tee operated.








Ball Valve - 1215



Weight (kg)

121510RRT400404 1/2" 15 55 38 95 0.226121510RRT400606 3/4" 20 65 42 95 0.400121510RRT400808 1" 25 78 50 130 0.648

Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N - DW 9 Lever Handle Steel EN 24T + Polyethylene HD 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1220 QT Ball Valve PN40 – DZR Red Lever

Valves Valves Range: 1220 QT Ball Valve PN40 – DZR Red Lever


1220 3 3 3 3 3 x x x x

Valve Suitability




DZR Brass Body, Stem and Cap suitable for potable water.




Lever operated.

This valve is not suitable for use on Group 1 Gases or unstable fluids,as defined by the Pressure Equipment Directive 97/23/EC.










Ball Valve - 1220



Weight (kg)


Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N 9 Tee Handle Aluminium EN 1706 LM6 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1225 QT Ball Valve PN40 – DZR Red Tee

Valves Valves Range: 1225 QT Ball Valve PN40 – DZR Red Tee


1225 3 3 3 3 3 x x x x

Valve Suitability


Water -10 to 120°C PN40







Tee operated.

This valve is not suitable for use on Group 1 Gases or unstable fluids,as defined by the Pressure Equipment Directive 97/23/EC.









Ball Valve - 1225



Weight (kg)

122550RRT400404 1/2" 15 55 38 95 0.210122550RRT400606 3/4" 20 65 42 95 0.342122550RRT400808 1" 25 78 50 130 0.604

Valves


No Component Material Specification 1 End Connector Brass - Chrome Plate BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body Brass - Chrome Plate BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N - DW 9 Lever Handle Steel EN 24T + Polyethylene HD 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1230 QT Ball Valve PN25 - Red Lever – Long Series

Valves Valves Range: 1230 QT Ball Valve PN25 - Red Lever – Long Series


1230 x 3 3 3 3 x x x x

Valve Suitability


Water -10°C to + 80°C PN25





PTFE seats and NBR stem seal to EN549.


Lever operated.






• BS EN 10226 (ISO7) threads or ISO 228.


Ball Valve - 1230



Weight (kg)

123013RRR250404 1/2" 15 55 48 38 95123013RRR250606 3/4" 20 65 52 42 95123013RRR250808 1" 25 78 65 50 130123013RRR251010 1 1/4" 32 91 69 55 130123013RRR251212 1 1/2" 40 99 80 65 160123013RRR251616 2" 50 119 88 72 160

Valves


A

C

B

2-R

C1/

2"

4

11

9

8

5

2

7

6

3

10

1



Valves Range 1231 QT Ball Valve M x F PN25 - Red Lever – Long Series

Valves Valves Range: 1231 QT Ball Valve M x F PN25 - Red Lever – Long Series


1231 x 3 3 3 3 x x x x

Valve Suitability





Male x Female ISO 7 threads.


PTFE seats.


Lever operated.




Features and Benefits:• Full bore quarter turn ball valve

• Blow out proof stem

• BS EN 10226 (ISO7) threads

• Approved for drinking water applications

• Unique Conex Bänninger lever handle

Ball Valve - 1231



Weight (kg)

123113TRR250404 1/2" 15 55 48 95 0.208123113TRR250606 3/4" 20 65 52 95 0.312123113TRR250808 1" 25 78 65 130 0.602123113TRR251010 1 1/4" 32 91 69 130 0.924123113TRR251212 1 1/2" 40 99 80 160 1.362123113TRR251616 2" 50 119 88 160 2.224

Valves


Ø

15

A

C

B

4

11

9

8

5

2

7

6

3

10

1



Valves Range 1232 QT Ball Valve M x M PN25 - Red Lever – Long Series

Valves Valves Range: 1232 QT Ball Valve M x M PN25 - Red Lever – Long Series


1232 x 3 3 3 3 x x x x

Valve Suitability






Male x Male ISO 7 threads.


PTFE seats.


Lever operated.






• BS EN 10226 (ISO7) threads.



Ball Valve - 1232



Weight (kg)

123213TTR250404 1/2" 15 55 48 95 0.208123213TTR250606 3/4" 20 65 52 95 0.312123213TTR250808 1" 25 78 65 130 0.602123213TTR251010 1 1/4" 32 91 69 130 0.924123213TTR251212 1 1/2" 40 99 80 160 1.362123213TTR251616 2" 50 119 88 160 2.224

Valves


No Component Material Specification 1 End Connector Brass - Chrome Plate BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body Brass - Chrome Plate BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring EPDM EN 2430:1995 7 Gland PTFE PTFE 8 Packing Nut Brass BS EN 12165 CW617N 9 Tee Handle Aluminium EN 1706 LM6 10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1235 QT Ball Valve PN25 - Red Tee – Long Series

Valves Valves Range: 1235 QT Ball Valve PN25 - Red Tee – Long Series


1235 x 3 3 3 3 x x x x

Valve Suitability







PTFE seats.


Tee operated.





• Full thread depth.




Ball Valve - 1235



Weight (kg)

123513RRT250404 1/2" 15 55 38 95 0.208123513RRT250606 3/4" 20 65 42 95 0.312123513RRT250808 1" 25 78 50 130 0.602

Valves


No Component Material Specification 1 End Connector Brass - Chrome Plate BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body Brass - Chrome Plate BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring NBR EN549 7 Packing Nut Brass BS EN 12165 CW617N - DW 8 Lever Handle Steel +PVC EN 24T + PVC 9 Washer Stainless Steel BS.ISO.15510 10 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1270 QT Gas Ball Valve PN25 – Yellow Lever – Short Series

EN 331

Valves Valves Range: 1270 QT Gas Ball Valve PN25 – Yellow Lever – Short Series


1270 x 3 x 3 3 3 3 3 x

Valve Suitability


Gas -20°C to + 60°C MOP5



Gas Applications:

Class 1 – Inert – Air, Argon, CO2, Helium, Nitrogen

Class 2 – Combustable – Hydrogen, Methane, Natural Gas

Class 3 – Corrosive – Chlorine

Class 4 – Oxygen


Brass Body, Stem and Cap.


PTFE seats and stem seal to EN549.


Lever operated.


EN 331 Approved.

Independently tested by BSI Loughborough to comply with the essential requirements of BS EN 331.



• Designed in accordance with EN331 requirement.

• Threads to BS EN 10226 ( ISO 7).

• Independently tested by BSI Loughborough to meet all the essential requirement of BS EN 331

Ball Valve - 1270



Weight (kg)

127013RRY250404 1/2" 15 50 48 95 0.186127013RRY250606 3/4" 20 58 52 95 0.244127013RRY250808 1" 25 69 65 130 0.462127013RRY251010 1 1/4" 32 81 69 130 0.614127013RRY251212 1 1/2" 40 89 80 160 0.938127013RRY251616 2" 50 110 88 160 1.436

NBR Seals are generally applicable for Natural Gas, Gasoline, Oils, Air, Water, Seawater and Hydrocarbons. This material is not recommended for use with Benzene, Solvents and Xylol.

Valves


No Component Material Specification 1 End Connector Brass - Chrome Plate BS EN 12165 CW617N - DW 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body Brass - Chrome Plate BS EN 12165 CW617N - DW 5 Stem Brass BS EN 12165 CW617N - DW 6 Stem O Ring NBR EN549 7 Packing Nut Brass BS EN 12165 CW617N 8 Tee Handle Aluminium EN 1706 LM6 9 Washer Stainless Steel BS.ISO.15510 10 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1275 QT Gas Ball Valve PN25 – Yellow Tee – Short Series

EN 331

Valves Valves Range: 1275 QT Gas Ball Valve PN25 – Yellow Tee – Short Series


1275 x 3 x 3 3 3 3 3 x

Valve Suitability

1275 Temp (°C) Bar psi Non Gas -20°C to + 80°C PN25




Gas Applications:

Class 1 – Inert – Air, Argon, CO2, Helium, Nitrogen.

Class 2 – Combustable – Hydrogen, Methane, Natural Gas.

Class 3 – Corrosive – Chlorine.

Class 4 – Oxygen.


Brass Body, Stem and Cap.


PTFE seats and stem seal to EN549.


Tee operated.


EN 331 Approved.





• Threads to BS EN 10226 (ISO 7).

Ball Valve - 1275



Weight (kg)

127513RRJ250404 1/2" 15 50 38 95 0.186127513RRJ250606 3/4" 20 58 42 95 0.244127513RRJ250808 1" 25 69 50 130 0.462


Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring NBR EN549 7 Packing Nut Brass BS EN 12165 CW617N - DW 8 Lever Handle Steel EN 24T + Polyethylene HD 9 Washer Stainless Steel BS.ISO.15510 10 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1240 QT Gas Ball Valve PN25 – DZR Yellow Lever

EN 331

Valves Valves Range: 1240 QT Gas Ball Valve PN25 – DZR Yellow Lever


1240 x 3 x 3 3 3 3 3 x

Valve Suitability

1240 Temp (°C) Bar psi Non Gas -20°C to + 80°C PN25




Gas Applications:




Class 4 – Oxygen.


DZR Brass Body, Stem and Cap.


PTFE seats and NBR stem seal to EN549


Lever operated.


EN 331 Approved.


Features and Benefits:• Full bore quarter turn ball valve

• Blow out proof stem

• Designed in accordance with EN331 requirement

• BS EN 10226 (ISO7) threads

• Unique Conex Bänninger lever handle

Ball Valve - 1240



Weight (kg)



Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring NBR EN549 7 Packing Nut Brass BS EN 12165 CW617N 8 Tee Handle Aluminium EN 1706 LM6 9 Washer Stainless Steel BS.ISO.15510 10 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1245 QT Gas Ball Valve PN25 – DZR Yellow Tee

EN 331

Valves Valves Range: 1245 QT Gas Ball Valve PN25 – DZR Yellow Tee


1245 x 3 x 3 3 3 3 3 x

Valve Suitability


Non Gas -20°C to + 80°C PN25




Gas Applications:




Class 4 – Oxygen.




PTFE seats and NBR stem seal to EN549


Tee operated.


EN 331 Approved.






Ball Valve - 1245



Weight (kg)

124550RRJ250404 1/2" 15 48 38 95 0.208124550RRJ250606 3/4" 20 52 42 95 0.312124550RRJ250808 1" 25 65 50 130 0.602


Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N - DW 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring NBR EN549 7 Packing Nut Brass - Chrome Plate BS EN 12165 CW617N - DW 8 Lever Handle Steel EN 24T + Polyethylene HD 9 Washer Stainless Steel BS.ISO.15510 10 Lever Nut Stainless Steel BS.ISO.15510


Valves Range 1290 QT Gas Ball Valve PN40 – DZR Yellow Lever

EN 331

Valves Valves Range: 1290 QT Gas Ball Valve PN40 – DZR Yellow Lever


1290 x 3 x 3 3 3 3 3 x

Valve Suitability

1290 Temp (°C) Bar psi Non Gas -20 to 80°C PN40

Gas -20 to 60°C MOP1




Gas Applications:




Class 4 – Oxygen.






Lever operated.


EN 331 Approved.





• Full Thread depth.



• Available with ISO228 thread.


Ball Valve - 1290



Weight (kg)


Valves


No Component Material Specification 1 End Connector DZR Brass BS EN 12164 CW602N 2 Ball Brass - Chrome Plate BS EN 12165 CW617N 3 Ball Seal PTFE PTFE 4 Body DZR Brass BS EN 12164 CW602N 5 Stem DZR Brass BS EN 12164 CW602N 6 Stem O Ring NBR EN549 7 Packing Nut Brass - Chrome Plate BS EN 12165 CW617N - DW 8 Tee Handle Aluminium EN 1706 LM6 9 Washer Stainless steel BS.ISO.15510 10 Lever Nut Stainless steel BS.ISO.15510


Valves Range 1295 QT Gas Ball Valve PN40 – DZR Yellow Tee

EN 331

Valves Valves Range: 1295 QT Gas Ball Valve PN40 – DZR Yellow Tee


1295 x 3 x 3 3 3 3 3 x

Valve Suitability

1295 Temp (°C) Bar psi Non Gas -20 to 80°C PN40

Gas -20 to 60°C MOP1




Gas Applications:




Class 4 – Oxygen.






Tee handle operated.


EN 331 Approved.





• Full Thread depth.




Ball Valve - 1295



Weight (kg)

129550RRJ400404 1/2" 15 55 38 95 0.226129550RRJ400606 3/4" 20 65 42 95 0.4129550RRJ400808 1" 25 78 50 130 0.648

Valves


1

2

3

5

6

7

8

B

C

A

9

10

11

1213

14 15

4

16

No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 End Cap DZR Brass BS EN 12164 CW602N 3 Dust cap Brass BS EN 12165 CW617N 4 Retaining strap EPDM EN 2430:1995 5 Ball DZR Brass BS EN 12164 CW602N 6 Stem DZR Brass BS EN 12164 CW602N 7 Stem nut DZR Brass BS EN 12164 CW602N 8 Nut Stainless steel BS.ISO.15510 9 Spring washer Stainless steel BS.ISO.15510 10 Tee handle Aluminium EN 1706 LM6 11 Gland PTFE PTFE 12 O-ring EPDM EN 2430:1995 13 Hose union Brass BS EN 12165 CW617N 14 Retaining cap Brass BS EN 12165 CW617N 15 O-ring EPDM EN 2430:1995 16 Ball seat PTFE PTFE

Tee Handle Version: 1256 - 1/2" - 3/4"

Valves Range 1256 QT Ball Valve PN16 – DZR Hose Union Drain Tap

Valves Valves Range: 1256 QT Ball Valve PN16 – DZR Hose Union Drain Tap




PTFE seats.


Tee handle operated.




1256 x 3 3 3 3 x x x x

Valve Suitability







• Supplied with hose union and dust cap.

Ball Valve - 1256



Weight (kg)

125650MHT160404 1/2" 15 93.4 38.3 55125650MHT160606 3/4" 20 97.4 41.8 55

Valves

Valves Range 1340 Double Check Valves PN16


1340 - 1/2" - 2"

No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon Nylon 66 4 Clip Stainless steel BS.ISO.15510 5 O Ring EPDM EN 2430:1995 6 Drain Screw DZR Brass BS EN 1982 CC491K

Valves Valves Range: 1340 Double Check Valves PN16


1340 x 3 3 x x x x x x

Valve Suitability




Features and Benefits:• Designed in accordance with WRAS requirement

and BS 6282-1 Standards.

• ISO 228 parallel female ends.

• PN 16 from -10° to 85°C.

• Specifically designed to be used with water.

• Prevents back siphonage.

• Manufactured in accordance with BS EN 13959.

Double Check Valve - 1340

Order Code

ISO 288 threadSize DN A B

Weight (kg)

134050FF0160404 1/2" 15 70 17.3 0.10134050FF0160606 3/4" 20 85 19.8 0.17134050FF0160808 1" 25 100 22.8 0.27134050FF0161010 1 1/4" 32 120 26.1 0.40134050FF0161212 1 1/2" 40 138.5 30.3 0.58134050FF0161616 2" 50 183.2 35.8 1.30

Valves

Valves Range 1360 Horizontal Lift Check Valves PN32


1360 - 1/2" - 2"

No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Disc Bronze BS EN 1982 CC491K 4 Gasket Seal PTFE PTFE 5 ID Disc Aluminium EN 1706 LM6

Valves Valves Range: 1360 Horizontal Lift Check Valves PN32


1360 3 3 3 3 3 x x x x

Valve Suitability

1360 Temp (°C) Bar psi Water -10°C to + 100°C PN 32

Water at 200°C PN16


Specification:Valves are manufactured in accordance with BS 5154.

Disc is spherical shaped guided in the cap. Body seat is integral.

Connecting threads are in accordance with BS EN 10266 (ISO7) or ISO228.

This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

0 40 80 120 160 200 240


Features and Benefits:• Suitable for water and steam service.

• Metal to metal seat.

• Designed in accordance with BS 5154 and WRAS requirements.



Horizontal Lift Check Valve - 1360

Order Code

BS EN 10226 (ISO 7) threadSize DN A B

Weight (kg)

136020RR0320404 1/2" 15 60 34 0.28136020RR0320606 3/4" 20 75 42 0.44136020RR0320808 1" 25 85 46 0.60136020RR0321010 1 1/4" 32 100 51 1.14136020RR0321212 1 1/2" 40 110 54 1.46136020RR0321616 2" 50 120 72 2.57

Valves

1451 - 1/2" - 2"

No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW

Valves Range 1451 Spring Check Non Return Valve


Valves Valves Range: 1451 Spring Check Non Return Valve


1451 x 3 3 x 3* x x x x

Valve Suitability

1451 Temp (°C) Bar psi Water -10°C to + 100°C PN 12/10 Min Operating Pressure

1/2" - 1" 12 bar @ 90°C -0.002 bar to + 0.04 bar

1/4" - 2" 10 bar @ 90°C Not suitable for hot working


* Limited to 5 bar max


Features and Benefits:• Designed in accordance with WRAS requirement.

• Brass core for improved strength and performance .

• PN12 up to 1", PN10 above 1".

• Threads to ISO228.

Non-Return Valve - 1451

Order Code

ISO228 ThreadSize DN A B

Weight (kg)

145110FF0120404 1/2" 15 12 47.5 33145110FF0120606 3/4" 20 12 51 42145110FF0120808 1" 25 12 58 47145110FF0101010 1 1/4" 32 10 72 59145110FF0101212 1 1/2" 40 10 83 67145110FF0101616 2" 50 10 91 83

Valves

Valves Range 1461 Foot Valve


1461 - 1/2" - 2"

No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW 7 Strainer Stainless Steel BS.ISO.15510 8 Strainer Adaptor Acetal Acetal

Valves Valves Range: 1461 Foot Valve


1461 x 3 x 3 3* x x x x

Valve Suitability

1461 Temp (°C) Bar psi Water -10°C to + 100°C PN 12/10 Min Operating Pressure

1/2" - 1" 12 bar @ 90°C Not Suitable for Hot working Pressure

1/4" - 2" 10 bar @ 90°C


* Limited to 5 bar max



• Stainless steel mesh strainer.

• Brass core for improved strength and performance.

• PN12 up to 1", PN10 above 1".

• Threads to ISO228.

Non-Return Valve - 1461

Order Code


Weight (kg)

146110FF0120404 1/2" 15 12 65 33146110FF0120606 3/4" 20 12 86 42146110FF0120808 1" 25 12 103.5 47146110FF0101010 1 1/4" 32 10 119 59146110FF0101212 1 1/2" 40 10 141.5 67146110FF0101616 2" 50 10 159 83

Valves

Valves Range 1470 Swing Check Valve PN25 (Brass)


1470 - 1/2" - 2"

No Component Material Specification 1 Body Brass BS EN 112165 CW617N 2 Cap Brass BS EN 112165 CW617N 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Brass BS EN 112165 CW617N 6 Seat Brass BS EN 112165 CW617N 7 Retaining Nut Brass BS EN 112165 CW617N

Valves Valves Range: 1470 Swing Check Valve PN25 (Brass)

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1470 3 3 3 3 x x x x x

Valve Suitability


at 186°C PN10.5


Specification:Brass Body.

Metal Disc, Screwed in Cap.

Operation is automatic using a swing type check.

Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.

Connecting threads are to BS EN 10226.

This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

0 30 60 90 120 150 180 210

186100

10.5

25



• Suitable for water and other liquids.


• Horizontal swing check design.

• Choice of alternative disc material.

• Threads to BS EN 10226 (ISO 7).

• Threads to ISO228 available to order.

Swing Check Valve - 1470

Order Code


Weight (kg)

147010RR0250404 1/2" 15 60 42 0.26147010RR0250606 3/4" 20 70 48 0.37147010RR0250808 1" 25 80 54 0.64147010RR0251010 1 1/4" 32 90 60 0.92147010RR0251212 1 1/2" 40 100 70 1.26147010RR0251616 2" 50 110 80 1.95

Valves

Valves Range 1470 Swing Check Valve PN25 (Bronze)


1470 - 1/2" - 2"

No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Bronze BS EN 1982 CC491K 6 Seat Bronze BS EN 1982 CC491K 7 Retaining Nut Bronze BS EN 1982 CC491K

Valves Valves Range: 1470 Swing Check Valve PN25 (Bronze)


1470 3 3 3 3 3 x x x x

Valve Suitability


at 186°C PN10.5


Specification:Bronze Body

Metal Disc, Screwed in Cap.

Operation is automatic using a swing type check.

Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.

This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.



• Suitable for water and other liquids.


• Horizontal swing check design.

• Choice of alternative disc material.

• Threads to BS EN 10226 ( ISO7).


36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

0 30 60 90 120 150 180 210

186100

10.5

25

Swing Check Valve - 1470

Order Code


Weight (kg)

147020RR0250404 1/2" 15 60 42 0.36147020RR0250606 3/4" 20 70 48 0.44147020RR0250808 1" 25 80 54 0.69147020RR0251010 1 1/4" 32 90 60 0.97147020RR0251212 1 1/2" 40 100 70 1.38147020RR0251616 2" 50 110 80 2.01

Valves

Valves Range S746 Drain Tap


S746 - 1/2" No Component Material Specification 1 Body DZR BS EN12165 CW602N 2 Seat Washer NBR NBR 3 Washer Plate Brass BS EN12165 CW617N-DW 4 Spindle Brass BS EN12165 CW617N-DW 5 O Ring NBR NBR 6 Gland Nut Brass BS EN 12164 CW614N


2

Valves Valves Range: S746 Drain Tap

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) S746 x 3 3 x x x x x x

Valve Suitability

S746 Temp (°C) Bar psi Non Gas -30°C to + 110°C PN16/PN5



Designed and manufactured to BS 2879 Type 2

Dezincification Resistant

WRAS Approved

Pressure rating PN 16 at 30°C : PN 5 at 110°C

Operating Temperature Range 0 to 110°C

Loose key operation

This valve is excluded from the requirements of the Pressure Equipment Directive PED 97/23/EC Article 1 - 3.20


Features and Benefits:


Drain tap - S746

Order Code Size DN A B CWeight

(kg)

N746015000000 1/2” 15

Valves

Valves Range 1120 Gate Valve Handwheel – PN20 Light Pattern

Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.

Handwheel version: 1120 - 1/2" - 2" No Component Material Specification

1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6


Valves Valves Range: 1120 Gate Valve Handwheel – PN20 Light Pattern

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1120 x 3 3 3 x x x x x

Valve Suitability

Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.

Non-rising stem.

Handwheel operated.

Threaded bonnet.

One piece wedge.

Taper threaded BS EN 10226 (ISO 7-1) or parallel threaded to ISO228.

Approved for potable water systems.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC100

0 30 60 90 120 150 180 210

1120 Temp (°C) bar psi





• Inside screw pattern with non rising stem.

• Designed in accordance with WRAS requirements .

• Designed in accordance with BS EN 12288.

• High quality brass construction.

• Not suitable for high temperature working.


• Available with ISO228 thread to order.

• Unique Conex handwheel.

Gate Valve - 1120

Order Code


Weight (kg)

112010RRW200404 1/2" 15 48 70 0.25112010RRW200606 3/4" 20 50 80 0.39 112010RRW200808 1" 25 60 90 0.58 112010RRW201010 11/4" 32 64 115 0.98 112010RRW201212 11/2" 40 69 125 1.10 112010RRW201616 2" 50 81 155 1.80

Valves

B

121110293481756

1413


Handwheel version: 1001 - 15-54mm No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6 13 Compression Ring Brass BS 2872 CZ107 14 Compression nut Brass BS EN 12165 CW617N-DW

Valves Range 1001 Gate Valve Handwheel PN16 – Compression Material Specification


Valves Valves Range: 1001 Gate Valve Handwheel PN16 – Compression

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1001 x 3 3 x x x x x x

Valve Suitability


Non-rising stem.

Handwheel operated.

Threaded bonnet.

One piece wedge.


36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC100

0 30 60 90 120 150 180 210

1001 Temp (°C) bar psi Water -10°C to + 100°C PN16




• Designed in accordance with WRAS requirements.



• Not suitable for high temperature working.

• Unique Conex handwheel.

Gate Valve - 1001

Order Code Size DN A BWeight

(kg)

100110CCW16E-E- 15 48 85100110CCW16G-G- 22 53 98100110CCW16H-H- 28 66 105100110CCW16J-J- 35 68 122.5100110CCW16K-K- 42 72 145.7100110CCW16N-N- 54 92 170

Valves


Lock Shield version: 1001 - 15-54mm 1121 - 1/2" - 4" No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW602N 9 Ferrule Brass BS EN 12164 CW614N

Valves Range 1121 Gate Valve Lock Shield PN20 (Bronze)


Valves Valves Range: 1121 Gate Valve Lock Shield PN20 (Bronze)


Valve Suitability

1121 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9


Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.

Bronze non-rising stem.

Lockshield key operated.

Bronze threaded bonnet.

Bronze one piece wedge.

Taper threaded BS EN 10226 (ISO 7-1).


Suitable for use with LTHW and chilled systems.

Kite marked.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC100 186

0 30 60 90 120 150 180 210

9




• Designed in accordance with DIN 50930-6 CC499K.

• Lock shield key available.

• Threads in accordance with BS EN 10226 (ISO7).

• Suitable for use with LTHW and chilled systems.

Gate Valve - 1121

Order Code


Weight (kg)

112120RRK200404 1/2" 15 55 85 0.32112120RRK200606 3/4" 20 60 95 0.414112120RRK200808 1" 25 65 110 0.63112120RRK201010 1 1/4" 32 75 125 1.03112120RRK201212 1 1/2" 40 80 145 1.40112120RRK201616 2" 50 90 170 1.94112120RRK202020 2 1/2" 65 100 - -112120RRK202424 3" 80 115 - -112120RRK203232 4" 100 135 - -

Valves

Valves Range 1121 Gate Valve Handwheel PN20 (Bronze)


Handwheel version: 1121 - 1/2" - 4" No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6


Valves Valves Range: 1121 Gate Valve Handwheel PN20 (Bronze)


Valve Suitability





Handwheel operated.





Kite marked.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar


0 30 60 90 120 150 180 210

9



• Robust Construction ensures reliable in-process service.





Gate Valve - 1121

Order Code


Weight (kg)

112120RRW200404 1/2" 15 55 85 0.28112120RRW200606 3/4" 20 60 95 0.41112120RRW200808 1" 25 70 115 0.60112120RRW201010 1 1/4" 32 75 125 1.01112120RRW201212 1 1/2" 40 80 145 1.35112120RRW201616 2" 50 90 165 1.90112120RRW202020 2 1/2" 65 100 210 -112120RRW202424 3" 80 115 240 -112120RRW203232 4" 100 135 290 -

Valves


Valves Range 1122 Gate Valve Handwheel PN20 (Brass)


Handwheel version: 1122 - 1/2" - 4" No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6

Valves Valves Range: 1122 Gate Valve Handwheel PN20 (Brass)


Valve Suitability




Non-rising stem.

Handwheel operated.

Threaded bonnet.

One piece wedge.



Kite marked.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar


0 30 60 90 120 150 180 210

9






• Robust design minimising pressure drop.




Gate Valve - 1122

Order Code


Weight (kg)

112210RRW200404 1/2" 15 55 85 0.26

112210RRW200606 3/4" 20 60 95 0.40

112210RRW200808 1" 25 70 115 0.57112210RRW201010 1 1/4 32 75 125 0.96112210RRW201212 1 1/2" 40 80 145 1.13112210RRW201616 2" 50 90 165 1.81112210RRW202020 2 1/2" 65 100 210112210RRW202424 3" 80 115 240112210RRW203232 4" 100 135 290

Valves


Valves Range 1122 Gate Valve Lock Shield PN20 (Brass)


Lock Shield version: 1122 - 1/2" - 4" No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer Brass BS EN 12165 CW617N-DW 9 Ferrule Brass BS EN 12164 CW614N

Valves Valves Range: 1122 Gate Valve Lock Shield PN20 (Brass)


Valve Suitability




Brass non-rising stem.


Brass threaded bonnet.

Brass one piece wedge.



Kite marked.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar


0 30 60 90 120 150 180 210

9




• Inside screen pattern with non rising stem.




Gate Valve - 1122

Order Code


Weight (kg)

112210RRK200404 1/2" 15 55 85 0.26112210RRK200606 3/4" 20 60 95 0.40112210RRK200808 1" 25 65 110 0.57112210RRK201010 1 1/4" 32 75 125 0.95112210RRK201212 1 1/2" 40 80 145 1.12112210RRK201616 2" 50 90 170 1.80112210RRK202020 2 1/2" 65 100112210RRK202424 3" 80 115112210RRK203232 4" 100 135

Valves


Valves Range 1124 Gate Valve Handwheel PN20 (DZR)


Handwheel version: 1124 - 1/2" - 4" No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW617N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6

Valves Valves Range: 1124 Gate Valve Handwheel PN20 (DZR)


Valve Suitability



Specification Clause:DZR Brass Gate Valve designed in accordance with BS EN 12288.

DZR non-rising stem.

Handwheel operated.

DZR Brass threaded bonnet.

DZR Brass one piece wedge.



36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar


0 30 60 90 120 150 180 210

9




• Dezincification resistant brass construction .


• Limits fungal growth and reduces system corrosion.




Gate Valve - 1124

Order Code


Weight (kg)

112450RRW200404 1/2" 15 55 85 0.28112450RRW200606 3/4" 20 60 95 0.41112450RRW20080 1" 25 65 115 0.61

112450RRW201010 11/4" 32 75 125 1.01112450RRW201212 11/2" 40 80 145 1.16112450RRW201616 2" 50 90 165 1.90112450RRW202020 2 ½" 65 100 210 -112450RRW202424 3" 80 115 240 -112450RRW203232 4" 100 135 290 -

Valves


Valves Range 1124 Gate Valve Lock Shield PN20 (DZR)


Lock Shield version: 1124- 1/2" - 4" No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW602N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Ferrule Brass BS EN 12164 CW614N

Valves Valves Range: 1124 Gate Valve Lock Shield PN20 (DZR)


Valve Suitability



Specification Clause:DZR Brass Gate Valve designed in accordance with BS EN 12288.

DZR Brass non-rising stem.


DZR threaded bonnet.

DZR one piece wedge.



36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar


0 30 60 90 120 150 180 210

9



• Non-rising stem design.



• Dezincification resistant brass prevents system corrosion and reduces fungal growth.



Gate Valve - 1124

Order Code

BS EN 10226 (ISO 7) taper thread

Size DN A BWeight

(kg)

112450RRK200404 1/2" 15 55 85 0.26112450RRK200606 3/4" 20 60 95 0.40112450RRK200808 1" 25 65 110 0.57112450RRK201010 11/4" 32 75 125 0.96112450RRK201212 11/2" 40 80 145 1.13112450RRK201616 2" 50 90 170 1.81112450RRK202020 2 ½" 65 100 - -112450RRK202424 3" 80 115 - -112450RRK203232 4" 100 135 - -

Valves


Valves Range 1126 Gate Valve Handwheel PN32 (Bronze)


Handwheel version: 1126 - 1/2" - 4" No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6

Valves Valves Range: 1126 Gate Valve Handwheel PN32 (Bronze)


Valve Suitability





Handwheel operated.





36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar


0 30 60 90 120 150 180 210

14




• High quality bronze construction suitable for pressure of up to 32 bar.


• Threads according to BS EN 10226.


Gate Valve - 1126

Order Code


Weight (kg)

112620RRW320404 1/2" 15 55 85 0.36112620RRW320606 3/4" 20 60 95 0.69112620RRW320808 1" 25 70 115 1.02112620RRW321010 1 1/4" 32 75 125 1.57112620RRW321212 1 1/2" 40 80 145 2.44112620RRW321616 2" 50 90 165 3.43112620RRW322020 2 1/2" 65 100 210 -112620RRW322424 3" 80 115 240 -112620RRW323232 4" 100 135 290 -

Valves


Valves Range 1130 Globe Valve Resilient Seat PN32


Handwheel version: 1130 - 1/2" - 4" No Component Material Specification 1 Handwheel Aluminium EN 1706 LM6 2 Rating Disc Aluminium EN 1706 LM6 3 Handwheel Nut Brass BS EN 12165 CW617N-DW 4 Stem Bronze BS EN 1982 CC491K 5 Packing Nut Bronze BS EN 12165 CW617N-DW 6 Packing PTFE PTFE 7 Bonnet Bronze BS EN 1982 CC491K 8 Core DZR Brass BS EN 12164 CW602N 9 Bonnet Washer Brass BS EN 12165 CW617N-DW 10 Body Bronze BS EN 1982 CC491K 11 Seat PTFE PTFE 12 Core retention Nut Brass BS EN 12165 CW617N-DW 13 Seat Nut Brass BS EN 12165 CW617N-DW


Valves Valves Range: 1130 Globe Valve Resilient Seat PN32

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1130 3 3 3 3 3* 3* 3* 3* x*Limited to 10 bar.

Valve Suitability



Gas -10°C to + 60°C PN5


Specification Clause:Globe Valve manufactured in accordance with BS 5154: 1991 Series B, PN32.

End Connections are Taper threaded to BS EN 10226-2 (ISO 7-1).

Design incorporates a replacable resilient seat disc retained on the stem by a nut.

Body seat is integral to the body.

Handwheel operated.


36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Sat

urat

ed s

team


0 30 60 90 120 150 180 210

14




• Provides accurate regulations and control of flow.

• Rising stem design.

• High quality bronze construction.

• Robust and compact design.



Globe Valve - 1130

Order Code


Weight (kg)

113020RRW320404 1/2" 15 60 95 0.30113020RRW320606 3/4" 20 65 100 0.54113020RRW320808 1" 25 80 115 0.84113020RRW321010 1 1/4" 32 90 135 1.36113020RRW321212 1 1/2" 40 100 155 1.76113020RRW321616 2" 50 120 174 2.97113020RRW322020 2 1/2" 65 145 - 4.14113020RRW322424 3" 80 200 - 5.68113020RRW323232 4" 100 - - -

Valves


Valves Range 1131 Globe Valve – Metal to Metal Seat PN32


Handwheel version: 1131 - 1/2" - 4" No Component Material Specification 1 Handwheel Aluminium EN 1706 LM6 2 Rating Disc Aluminium EN 1706 LM6 3 Handwheel Nut Brass BS EN 12165 CW617N-DW 4 Stem Bronze BS EN 1982 CC491K 5 Packing Nut Bronze BS EN 12165 CW617N-DW 6 Packing PTFE PTFE 7 Bonnet Bronze BS EN 1982 CC491K 8 Core DZR Brass BS EN 12164 CW602N 9 Bonnet Washer PTFE PTFE 10 Body Bronze BS EN 1982 CC491K


Valves Valves Range: 1131 Globe Valve – Metal to Metal Seat PN32

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1131 3 3 3 3 3 x x x x

Valve Suitability




Specification Clause:Globe Valve manufactured in accordance with BS 5154: 1991 Series B, PN32.

End Connections are Taper threaded to BS EN 10226-2 (ISO 7-1).

Design incorporates a metal seat disc retained on the stem.

Body seat is integral to the body.

Handwheel operated.


36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Sat

urat

ed s

team


0 30 60 90 120 150 180 210

14



• Designed in accordance with BS 5154.


• Provides accurate regulations and control of flow using a rising stem design.



Globe Valve - 1131

Order Code


Weight (kg)

113120RRW320404 1/2" 15 60 95 0.31113120RRW320606 3/4" 20 65 100 0.54113120RRW320808 1" 25 80 115 0.84113120RRW321010 1 1/4" 32 90 135 1.36113120RRW321212 1 1/2" 40 100 155 1.76113120RRW321616 2" 50 120 174 2.62113120RRW322020 2 1/2" 65 145 - 4.14113120RRW322424 3" 80 200 - 5.68113120RRW323232 4" 100 - - -

Valves

Scale and dirt can cause problems and damage to equipment installed in pipe systems. The installation of Conex Strainers will assist in reducing problems which might occur due to extraneous matter in pipe runs. Conex Strainers are a low cost investment ensuring a rapid return as they will assist in reducing system downtime and lowering maintenance costs.

1802 - 1/2" - 4"

No Component Material Specification 1 O - Ring EPDM EN 2430:1995 2 Blanking Plug DZR Brass BS EN 12164 CW602N 3 Rating Disc Aluminium EN 1706 LM6 4 Washer PTFE PTFE 5 Cap Brass BS EN 12165 CW617N-DW 6 Filter Screen Stainless Steel BS.ISO.15510 7 Body Brass BS EN 12165 CW617N-DW

Valves Range 1802 Y Pattern Strainer PN16 (Brass)

Y Pattern Strainer - 1802

Order Code


Weight (kg)

180210RR0160404 1/2" 15 65 42 0.152180210RR0160606 3/4" 20 75 50 0.246180210RR0160808 1" 25 90 56 0.358180210RR0161010 1 1/4" 32 110 65 0.584180210RR0161212 1 1/2" 40 120 75 0.868180210RR0161616 2" 50 135 90 1.270180210RR0162020 2 1/2" 65180210RR0162424 3" 80180210RR0163232 4" 100

Valves Valves Range: 1802 Y Pattern Strainer PN16 (Brass)


1802 x 3 3 3 3 x x x x

Valve Suitability



Specification:Brass Body.

Stainless Steel SS304 Screen.

Brass screw in Cap.

End connections to BS EN 10226 (ISO7) or to ISO228.

Pressure rating PN16 16 bar -10 to +100 degrees C. 7 bar At 170 degrees C.

Test pressure 24 bar hydraulic.

• The fluid to be transported is limited to Group 2 liquids i.e. non-hazardous and on no account should these valves be used for any Group 2 Gases, Group 1 Liquids or Group1 Gases.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

7

100 170

0 30 60 90 120 150 180 210



• Streamlined design in order to minimise pressure drop.

• Stainless steel mesh.

• Robust and compact design.

• Drilled and tapped for test point bosses available to order.


Valves

Scale and dirt can cause problems and damage to equipment installed in pipe systems. The installation of Conex Strainers will assist in reducing problems which might occur due to extraneous matter in pipe runs. Conex Strainers are a low cost investment ensuring a rapid return as they will assist in reducing system downtime and lowering maintenance costs.

1804 - 1/2" - 4"

No Component Material Specification 1 O - Ring EPDM EN 2430:1995 2 Balancing Plugs DZR Brass BS EN 12164 CW602N 3 Rating Disc Aluminium EN 1706 LM6 4 Washer PTFE PTFE 5 Cap Bronze BS EN 1982 CC491K 6 Screen Stainless Steel BS.ISO.15510

7 Body Bronze BS EN 1982 CC491K

Valves Range 1804 Y Pattern Strainer PN16 (Bronze)

Y Pattern Strainer - 1802

Order Code


Weight (kg)

180420RR0160404 1/2" 15 65 42 0.21180420RR0160606 3/4" 20 75 50 0.32180420RR0160808 1" 25 90 56 0.48180420RR0161010 11/4" 32 110 65 0.76180420RR0161212 11/2" 40 120 75 1.00180420RR0161616 2" 50 135 90 1.61180420RR0162020 2 1/2" 65180420RR0162424 3" 80180420RR0163232 4" 100

Valves Valves Range: 1804 Y Pattern Strainer PN16 (Bronze)


1804 x 3 3 3 3 x x x x

Valve Suitability



Specification:Bronze Body.

Stainless Steel SS304 Screen.

Bronze screw in Cap.

End connections to BS EN 10226 (ISO7).

Pressure rating PN16 16 bar -10 to +100 degrees C. 7 bar At 170 degrees C.

Test pressure 24 bar hydraulic.

• The fluid to be transported is limited to Group 2 liquids i.e. non-hazardous and on no account should these valves be used for any Group 2 Gases, Group 1 Liquids or Group1 Gases.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

7

100 170

0 30 60 90 120 150 180 210



• Integral test bosses allows for measurement of flow.


• Available with drilled and tapped bosses to order.

• Bronze body with streamlined internal contour to minimise pressure drop across valve.

• Stainless steel screen.


Documents

Valves - Conex Banninger Media - Press...10 Washer Stainless Steel BS.ISO.15510 11 Lever Nut Stainless Steel BS.ISO.15510 Lever Handle Version: 1260 - 1/2" - 2" Valves Range 1260 QT