Valve Automa-

wolseleyindustrial.ca

Valve AutomationR A P I D R E S P O N S E

• Scotch yoke mechanisms generate powerful opening and closing output torques.

• Accessory mounting pad for control panels.

• Output Torques match or exceed the required valve operating torques.

• Spring cartridge is fully enclosed to prevent environmental contamination while providing additional operational safety.

• Dual travel stops accommodate accurate valve alignment in both the open and closed positions.

• Temperature rating ranging from -47C to +80C with special applications down to -60C.

• Supply pressure ranges of 40 PSI to 174 PSI pneumatic pressure, 725 PSI to 3000 PSI hydraulic pressure.

• Available in spring return fail closed, fail open and double acting configurations.

PNEUMATIC & HYDRAULIC SCOTCH YOKE

SCOTCH YOKE CONTINUED

PRODUCTS

• Self Contained Hydraulic units are designed to operate in challenging environments where pneumatic pressure is unavailable.

• Engineered to automate all types of quarter turn valves including: ball valves, butterfly valves, plug valves & choke valves.

• Electro-less nickel plated and polished cylinder provides maximum corrosion resistance and reduces friction.

• Dual travels stops accommodate accurate valve alignment in both the open and closed positions.

• Temperature rating ranging from -50C to +80C • Supply pressure ranges of 30 PSI to 100 PSI

pneumatic pressure.• Engineered to automate all types of quarter

turn valves including: ball valves, butterfly valves, plug valves and choke valves.

• Available in spring return fail closed, fail open and double acting configurations.

• Top mounted position indication. • Compact design – high cycle and repeatability.

RACK & PINION

ELECTRIC

• Automating and sizing choke valve packages• Quarter turn, multi-turn and linear actuation • Quick closing HIPPS ( High-Integrity Pressure

Protection System ) application • Partial stroke testing – mechanical or through

controls• Full documentation team• High pressure pipeline actuation – Gas over

Oil and Direct Gas actuators

CAPABILITIES

• Utilizes electricity to operate• 24 VDC, 120, 240, 480 & 600 VAC• electric actuators.• On/Off - Fail Last Position.• Power to open & close.• Spring return option available ( sizing on

this is very limited )• Modulating 4 – 20 mA available.

VALVE AUTOMATION RAPID RESPONSE

SUPPORT & MAINTENANCE

STOCK MANUFACTURERS

LOCATIONS

VALVES & VALVE AUTOMATION

• Capabilities to automate valves up to 36” 600 class.

• Full inventory of soft goods repair kits for pneumatic and hydraulic actuators.

• Assembly and testing.• After-market support for Pneumatic /

Hydraulic actuators: − 24 Hour on Call service − Field assessment on failures − Field replacement of existing

problematic equipment − In house failure analysis and quick

turnaround repair − Flat Deck w/ picker truck available

wolseleyindustrial.ca 1.800.661.6997 Canada Wide

TM

TM

TM

SARNIA

MONTREAL

BURLINGTON

SAINT JOHN

RICHMOND

FORT ST JOHN

GRAND PRAIRIE

CALGARY SASKATOON

ESTERHAZY

RIMBEY

OYEN

EDMONTON

SUDBURY

WICI ActBro Rev 1 2019