V-Belts · 2011. 5. 12. · V-Belts Super HC® Molded Notch PowerBand® V-Belts by Gates The PowerBand construction allows multiple belts to function as a single unit, with even

��

www.bobdeansupply.comV-Belts

Super HC® Molded Notch PowerBand® V-Belts by Gates

The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.

Construction•Wrapped construction. •Polychloroprene compound.•Flex-Weave cover provides greater flexibility.•Flex-Bonded tensile cords. •Static conductive to ISO 1813 or RMA IP33-1985. •Non-self igniting.•Concave sidewalls straighten out in the pulley grooves to give full grip and better contact with the sides of the pulleys. •Arched top prevents “dishing” and distortion of the tensile section, thus uniformly distributing the tension on the cords.

Features/Advantages•Meets RMA oil and heat resistant standards and static conductivity standards.•The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.•Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves.•Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and absorbtion of bending stress without cord deterioration.

Markets/ApplicationsRecommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive.

Size Belt O.C. Lbs. Per Strand Part No.

3VX250 25.0 .10 -3VX265 26.0 .14 -3VX280 28.0 .16 -3VX300 30.0 .18 B06133VX315 31.5 .20 B06143VX335 33.5 .20 B06153VX355 35.5 .20 B06163VX375 37.5 .22 B06173VX400 40.0 .24 B06183VX425 42.5 .26 B06193VX450 45.0 .28 B0620

Product No. Series 9388 - 3VX Section3VX PowerBand Belts are available up to 22 strands. Belts in stock at Bob Dean Supply, Inc. are single strand unless otherwise noted.


5VX450 B06625VX500 50.0 .70 B06425VX530 53.0 .80 B06435VX560 56.0 .86 B06445VX580 B06775VX590 B06765VX600 60.0 .96 B06855VX630 63.0 1.00 B06455VX650 B06605VX670 67.0 1.04 B06475VX6905VX710 71.0 1.18 B06465VX750 75.0 1.21 B06485VX800 80.0 1.25 B06495VX850 85.0 1.36 B0650

Product No. Series 9389 - 5VX Section5VX PowerBand Belts are available up to 13 strands. Belts in stock at Bob Dean Supply, Inc. are single strand unless otherwise noted.


5VX900 90.0 1.39 B06515VX950 95.0 1.50 B0652

5VX1000 100.0 1.57 B06535VX1060 106.0 1.71 B06545VX1120 112.0 1.79 B06555VX1180 118.0 1.86 B06565VX1250 125.0 2.00 B06575VX1320 132.0 2.11 B06585VX1400 140.0 2.25 B06595VX1500 150.0 2.39 B06725VX1600 160.0 2.57 B06615VX1700 170.0 2.75 -5VX1800 180.0 2.89 B06635VX1900 190.0 3.07 B06645VX2000 200.0 3.25 -


3VX475 47.5 .29 B06213VX500 50.0 .30 B06223VX530 53.0 .33 B06233VX560 56.0 .34 B06243VX600 60.0 .37 B06253VX630 63.0 .40 B06263VX670 67.0 .41 B06273VX710 71.0 .44 B06283VX750 75.0 .46 B06293VX800 80.0 .50 B06303VX850 85.0 .53 B0631


3VX900 90.0 .56 B06323VX950 95.0 .60 B0633

3VX1000 100.0 .63 B06343VX1060 106.0 .66 B06353VX1120 112.0 .70 B06363VX1180 118.0 .74 B06373VX1250 125.0 .79 B06383VX1320 132.0 .83 B06403VX1400 140.0 .88 B0641

1-800-282-8378

��

V-Belts


8V1000 100.0 3.90 B06928V1060 106.0 4.15 -8V1120 112.0 4.42 -8V1180 118.0 4.67 -8V1250 125.0 5.00 -8V1320 132.0 5.25 -8V1400 140.0 5.58 B06968V1500 150.0 6.00 -8V1600 160.0 6.33 -8V1700 170.0 6.75 -8V1800 180.0 7.25 -8V1900 190.0 7.67 -

Product No. Series 9387 - 8V Section8V PowerBand Belts are available up to 11 strands. Belts in stock at Bob Dean Supply, Inc. are single strand unless noted.


8V2000 200.0 8.00 B06908V2120 212.0 8.50 B06978V2240 224.0 9.00 B06958V2360 236.0 9.42 -8V2500 250.0 10.00 B06948V2650 265.0 10.58 B07028V2800 280.0 11.33 -8V3000 300.0 12.08 -8V3150 315.0 12.75 -8V3350 335.0 13.58 -8V3550 355.0 14.33 B06988V3750 375.0 15.08 B0700


8V4000 400.0 16.08 B07018V4250 425.0 17.08 B07048V4500 450.0 18.08 -8V4750 475.0 19.17 -8V5000 500.0 20.17 -8V5600 560.0 22.75 -8V6000 600.0 24.42 -

Hi-Power® II V-Belts by Gates

The classical section V-belt, that performs better than any other classical belt on heavy-duty industrial drives. Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging.

Features/Advantages•Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life.•Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.•The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended proptection to the belt core from oil, dirt and heat.•Meets RMA oil and heat resistant standards.•Meets RMA static conductivity requirements.

Construction•Wrapped construction.•Rounded bottom corners relieve internal stress and offer high resistance to corner wear.•Flex-Weave polychloroprene impregated cover provides greater flexibility.•Flex-Bonded tensile cords.•Static conductive to RMA IP33-1985.•Non-self igniting.•Concave sidewalls straighten out to the exact shape of the groove, ensuring uniform contact.•Arched top prevents “dishing” and distortion of the tensile section, uniformly distributing the tension on the cords.

Markets/ApplicationsSuitable for all industrial applications, including v-flat drives.

IdentificationDurable orange marking indicating type and dimensions.

NoteGates Hi-Power belts are available in A, B, C, D and E cross sections.

��


Size Belt O.C. Wt. Ea. Part No.

A24 26.0 .17 Lbs B0001A25 27.0 .18 -A26 28.0 .20 B0002A27 29.0 .21 B0083A28 30.0 .22 B0084A29 31.0 .22 B0003

A29.8 31.8 .23 -A30 32.0 .23 B0085A31 33.0 .24 B0004A32 34.0 .24 B0005A33 35.0 .28 B0006A34 36.0 .29 B0007A35 37.0 .30 B0008A36 38.0 .30 B0009A37 39.0 .31 B0010A38 40.0 .31 B0011A39 41.0 .31 B0012A40 42.0 .32 B0086A41 43.0 .32 B0013A42 44.0 .33 B0014A43 45.0 .34 B0015A44 46.0 .34 B0016A45 47.0 .35 B0017A46 48.0 .35 B0018A47 49.0 .36 B0019A48 50.0 .37 B0020A49 51.0 .37 Lbs B0021A50 52.0 .42 B0022A51 53.0 .42 B0023A52 54.0 .43 B0024A53 55.0 .43 B0025A54 56.0 .44 B0026A55 57.0 .45 B0027A56 58.0 .45 B0028A57 59.0 .46 B0029A58 60.0 .47 B0030A59 61.0 .47 B0031A60 62.0 .48 B0032A61 63.0 .49 B0033A62 64.0 .49 B0034A63 65.0 .50 B0035A64 66.0 .50 B0036A65 67.0 .50 B0037A66 68.0 .51 B0038A67 69.0 .51 B0039A68 70.0 .51 B0040A69 71.0 .53 B0041A70 72.0 .53 B0042A71 73.0 .53 B0043

Product No. Series 9002 - A Section


A72 74.0 .53 B0044A73 75.0 .54 B0045A74 76.0 .54 B0046A75 77.0 .54 Lbs B0047A76 78.0 .54 B0048A77 79.0 .54 B0049A78 80.0 .54 B0050A79 81.0 .56 B0051A80 82.0 .56 B0052A81 83.0 .56 B0053A82 84.0 .57 B0054A83 85.0 B0055A84 86.0 B0056A85 87.0 B0057A86 88.0 B0058A87 89.0 B0059A88 90.0 B0060A89 91.0 B0061A90 92.0 B0062A91 93.0 .64 B0063A92 94.0 .64 B0064A93 95.0 .65 B0065A94 96.0 .65 B0066A95 97.0 .66 B0067A96 98.0 .67 B0068A97 99.0 .66 B0069A98 100.0 .68 B0070A99 101.0 .69 -

A100 102.0 .70 B0071A101 103.0 .71 Lbs -A102 104.0 .72 -A103 105.0 .72 B0072A104 106.0 .74 -A105 107.0 .74 B0073A106 108.0 .75 -A107 109.0 .75 -A108 110.0 .76 -A110 112.0 .76 B0074A112 114.0 .78 B0075A113 115.0 .79 -A114 116.0 .80 -A115 117.0 .80 Lbs -A116 118.0 .81 -A117 119.0 .82 -A118 120.0 .83 -A120 122.0 .84 B0076A124 126.0 .85 -A125 127.0 .87 -A128 130.0 .87 B0077


A130 132.0 .87 -A132 134.0 .87 -A133 135.0 .94 -A134 136.0 .94 -A136 138.0 .96 Lbs B0078A137 139.0 .98 -A144 146.0 1.02 B0079A152 154.0 1.02 -A156 158.0 1.03 -A157 159.0 1.03 -A158 160.0 1.05 -A162 164.0 1.06 -A167 169.0 1.09 -A173 175.0 1.20 B0081A180 182.0 1.30 B0082A200 202.0 1.40 -

Hi-Power® II V-Belts by Gates (continued)

1-800-282-8378

��

V-Belts

Product No. Series 9003 - B Section


B28 31.0 .35 Lbs B0164B29 32.0 .36 -B30 33.0 .37 B0366B31 34.0 .38 -B32 35.0 .40 B0215B33 36.0 .41 -B34 37.0 .42 B0217B35 38.0 .46 B0177B36 39.0 .47 B0087B37 40.0 .48 -B38 41.0 .48 B0088B39 42.0 .49 B0175B40 43.0 .49 B0089B41 44.0 .50 B0090B42 45.0 .51 B0091B43 46.0 .52 B0092B44 47.0 .53 B0093B45 48.0 .54 B0094B46 49.0 .55 B0095B47 50.0 .56 B0096B48 51.0 .57 B0097B49 52.0 .58 B0098B50 53.0 .65 B0099B51 54.0 .66 B0100B52 55.0 .67 B0101B53 56.0 .67 B0102B54 57.0 .69 B0103B55 58.0 .69 B0104B56 59.0 .69 B0106B57 60.0 .70 B0107B58 61.0 .70 B0108B59 62.0 .70 B0109B60 63.0 .72 B0110B61 64.0 .72 B0111B62 65.0 .73 B0112B63 66.0 .74 B0113B64 67.0 .75 B0114B65 68.0 .76 B0115B66 69.0 .77 B0116B67 70.0 .78 B0117B68 71.0 .79 B0118B69 72.0 .80 B0119B70 73.0 .81 B0120B71 74.0 .82 B0121B72 75.0 .83 B0122B73 76.0 .84 B0123B74 77.0 .85 B0124B75 78.0 .86 B0125B76 79.0 .88 B0126B77 80.0 .88 B0127B78 81.0 .88 B0128


B79 82.0 .88 B0129B80 83.0 .91 B0130B81 84.0 .92 B0131B82 85.0 .93 B0132B83 86.0 .94 B0133B84 87.0 .95 B0134B85 88.0 .96 B0135B86 89.0 .96 B0136B87 90.0 .99 B0137B88 91.0 1.00 B0138B89 92.0 1.01 B0139B90 93.0 1.01 B0140B91 94.0 1.02 B0141B92 95.0 1.03 B0142B93 96.0 1.04 B0143B94 97.0 1.05 B0144B95 98.0 1.06 B0145B96 99.0 1.07 B0146B97 100.0 1.08 B0147B98 101.0 1.09 B0148B99 102.0 1.10 B0149

B100 103.0 1.11 B0150B101 104.0 1.13 B0151B102 105.0 1.14 B0152B103 106.0 1.14 -B104 107.0 1.16 -B105 108.0 1.16 -B106 109.0 1.18 -B107 110.0 1.19 -B108 111.0 1.20 B0153B109 112.0 1.21 -B110 113.0 1.22 -B111 114.0 1.23 -B112 115.0 1.24 B0154B113 116.0 1.24 -B114 117.0 1.26 -B115 118.0 1.27 B0225B116 119.0 1.28 B0155B117 120.0 1.29 -B118 121.0 1.30 B0229B119 122.0 1.32 -B120 123.0 1.35 B0156B122 125.0 1.36 -B123 126.0 1.37 -B124 127.0 1.38 B0157B125 128.0 1.39 -B126 129.0 1.40 -B127 130.0 1.40 -B128 131.0 1.43 B0158B130 133.0 1.62 -B131 134.0 1.63 -


B132 135.0 1.64 -B133 136.0 1.65 B0159B134 137.0 1.66 -B135 138.0 1.67 -B136 139.0 1.68 B0160B137 140.0 1.69 -B138 141.0 1.70 -B139 140.0 1.72 -B140 143.0 1.73 B0161B141 144.0 1.74 -B142 145.0 1.75 -B143 146.0 1.76 -B144 147.0 1.76 B0162B145 148.0 1.79 -B146 149.0 1.79 -B147 150.0 1.80 -B148 151.0 1.80 -B149 152.0 1.81 -B150 153.0 1.81 B0163B151 154.0 1.81 -B152 155.0 1.82 -B153 156.0 1.82 -B154 157.0 1.83 B0226B156 159.0 1.84 -B157 160.0 1.84 -B158 161.0 1.84 B0165B160 163.0 1.85 -B161 164.0 1.85B162 165.0 1.85 B0166B164 167.0 1.86 -B165 168.0 1.86 -B166 169.0 1.86 -B168 171.0 1.87 -B169 172.0 1.88 -B170 173.0 1.89B173 176.0 1.92 -B174 177.0 1.93 -B175 178.0 1.95 -B177 180.0 1.97 -B178 181.0 1.98 -B180 183.0 2.00 B0168B182 185.0 2.02 -B184 187.0 2.04 -B185 188.0 2.05 -B186 189.0 2.06 -B187 190.0 2.07 -B188 191.0 2.08 -B190 193.0 2.11 -

��


Hi-Power® II V-Belts by Gates (continued)


B192 195.0 2.13 -B195 198.0 2.16 B0169B199 202.0 2.21 -B200 203.0 2.22 -B201 204.0 2.23 -B204 207.0 2.27 -B205 208.0 2.27 -B210 213.0 2.36 B0170B212 213.0 2.37 -B215 216.0 2.40 -B217 218.0 2.43 -B218 219.0 2.44 -B221 222.0 2.47 -


B223 224.0 2.49 -B225 226.0 2.51 B0171B228 229.0 2.55 -B230 231.0 2.57 -B234 235.0 2.52 -B235 236.0 2.63 -B236 237.0 2.64 -B240 241.0 2.68 B0172B248 249.0 2.77 -B255 256.0 2.85 B0173B265 266.0 2.96 -B270 271.0 3.02 B0174B276 277.0 3.09 -

Product No. Series 9003 - B Section (continued)


B279 280.0 3.12 -B285 286.0 3.18 -B290 291.0 3.24 -B292 295.0 3.26 -B300 301.0 3.58 -B310 311.0 3.70 -B315 316.0 3.76 -B330 331.0 4.60 -B340 341.0 4.69 -B345 346.0 4.74 -B355 356.0 4.77 -B360 361.0 4.83 -

Product No. Series 9004 - C Section


C44 48.0 .98 Lbs -C46 50.0 1.02 -C47 51.0 1.04 -C48 52.0 1.06 -C50 54.0 1.10 -C51 55.0 1.11 B0179C52 56.0 1.13 -C53 57.0 1.17 -C54 58.0 1.21 -C55 59.0 1.23 B0223C56 60.0 1.27 -C57 61.0 1.29 -C58 62.0 1.31 -C59 63.0 1.33 -C60 64.0 1.35 B0180C61 65.0 1.37 -C62 66.0 1.41 -C63 67.0 1.44 -C64 68.0 1.45 -C65 69.0 1.47 -C66 70.0 1.50 -C67 71.0 1.50 -C68 72.0 1.52 B0181C69 73.0 1.52 -C70 74.0 1.54 -C71 75.0 1.56 -C72 76.0 1.58 B0182C73 77.0 1.57 -C74 78.0 1.58 -C75 79.0 1.58 B0183C76 80.0 1.59 -C78 82.0 1.59 -C79 83.0 1.60 -C80 84.0 1.60 -


C81 85.0 1.62 B0184C82 86.0 1.64 -C83 87.0 1.66 -C84 88.0 1.68 -C85 89.0 1.70 B0185C86 90.0 1.72 -C87 91.0 1.74 B0178C88 92.0 1.76 -C90 94.0 1.79 B0186C91 95.0 1.82 -C92 96.0 1.84 -C93 97.0 1.85 -C94 98.0 1.88 -C95 99.0 1.89 -C96 100.0 1.92 B0187C97 101.0 1.93 -C98 102.0 1.95 -C99 103.0 1.97 -

C100 104.0 B0188C101 105.0 2.01 -C102 106.0 2.03 -C103 107.0 2.05 -C104 108.0 2.07 -C105 109.0 2.09 B0189C106 110.0 2.11 -C107 111.0 2.13 -C108 112.0 2.14 -C109 113.0 2.16 B0190C110 114.0 2.19 -C111 115.0 2.21 -C112 116.0 2.23 B0191C114 118.0 2.26 -C115 119.0 2.28 B0192C116 120.0 2.30 -


C117 121.0 2.32 -C118 122.0 2.34 -C120 124.0 2.38 B0193C122 126.0 2.42 -C124 128.0 2.45 -C126 130.0 2.50 -C128 132.0 2.53 B0194C130 134.0 2.59 -C131 135.0 2.63 -C132 136.0 2.65 -C134 138.0 2.67 -C135 139.0 2.75 -C136 140.0 2.79 B0195C137 141.0 2.79 -C138 142.0 2.80 -C139 143.0 2.80 -C140 144.0 2.81 -C141 145.0 2.81 -C142 146.0 2.82 -C143 147.0 2.83 -C144 148.0 2.85 B0196C146 150.0 2.89 -C147 151.0 2.90 -C148 152.0 2.92 -C150 154.0 2.96 B0197C151 155.0 2.98 -C152 156.0 3.00 -C153 157.0 3.02 -C154 158.0 3.04 -

1-800-282-8378

��

V-Belts


C155 159.0 3.06 -C156 160.0 3.08 -C158 162.0 3.12 B0198C160 164.0 3.16 -C162 166.0 3.20 B0199C164 168.0 3.23 -C165 169.0 3.25 -C166 170.0 3.27 -C168 172.0 3.31 -C169 173.0 3.33 -C170 174.0 3.35 -C173 177.0 3.41 B0200C175 179.0 3.45 -C177 181.0 3.50 -C180 184.0 3.54 B0201C181 185.0 3.57 -C183 187.0 3.94 -C185 189.0 3.98 -C188 192.0 4.03 -

Product No. Series 9004 - C Section (continued)


C190 194.0 4.07 -C195 199.0 4.17 B0202C197 201.0 4.23 -C200 204.0 4.27 -C202 206.0 4.31 -C204 208.0 4.39 -C207 211.0 4.37 -C210 214.0 4.81 B0203C214 216.0 4.85 -C218 220.0 4.92 -C220 222.0 4.97 -C221 223.0 5.01 -C225 227.0 5.08 B0204C228 230.0 5.13 -C229 231.0 5.19 -C235 237.0 5.28 -C240 242.0 5.39 B0205C245 247.0 5.49 -C246 248.0 5.52 -


C248 250.0 5.60 -C255 257.0 5.70 B0206C265 267.0 6.02 -C270 272.0 6.09 B0207C276 278.0 6.14 -C280 282.0 6.22 -C285 287.0 6.62 -C290 292.0 6.68 -C295 297.0 6.73 -C297 299.0 6.85 -C300 302.0 6.93 B0209C315 317.0 7.23 -C320 322.0 7.41 -C330 332.0 7.55 B0211C345 347.0 7.86 -C360 362.0 8.17 B0213C390 392.0 8.80 B0218C420 422.0 10.35 B0214

Size Belt O.C. Wt. Ea. (Lbs.)

D105 110.0 5.30D107 112.0 5.41D112 117.0 5.56D120 125.0 5.86D128 133.0 6.14D136 141.0 6.43D140 145.0 6.59D144 149.0 6.73D158 163.0 7.24D162 167.0 7.38D165 170.0 7.49D167 172.0 7.59D171 176.0 7.46D173 178.0 7.50D180 185.0 7.76D195 200.0 8.31D205 210.0 9.10D210 215.0 9.46


D225 228.0 10.34D240 243.0 10.92D255 258.0 11.50D270 273.0 12.07D285 288.0 12.65D300 303.0 13.22D315 318.0 14.08D330 333.0 14.66D345 348.0 15.23D360 363.0 15.81D390 393.0 16.96D420 423.0 18.11D450 453.0 19.31D480 483.0 20.42D540 543.0 23.04D600 603.0 25.87D660 663.0 28.24E180 187.0 11.66

Product No. Series 9005 - D Section


E195 202.0 12.46E210 217.0 13.27E240 244.0 15.31E270 274.0 16.91E300 304.0 18.53E330 334.0 19.82E360 364.0 21.44E390 394.0 23.05E420 424.0 24.75E480 484.0 27.89E540 544.0 32.02E600 604.0 35.28E660 664.0 38.14

Fort Myers Branch Clewiston Branch2624 Hanson Street 1310 Evercane RoadFort Myers, FL 33901 Clewiston, FL 33440(800) 282-8378 (800) 282-5186(239) 332-1131 (863) 983-6131(239) 332-7746 Fax (863) 983-9775 [email protected] [email protected]

Check item availability and make secure online purchases with Bob Dean Supply’s eCatalog at

www.bobdeansupply.com

��


Hi-Power® II PowerBand® V-Belts by Gates

The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.

Features/Advantages•The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.•Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and absorbtion of bending stress without cord deterioration.•Concave Sidewalls provide proper cord support and full contact with the sheave-groove for equal loading and uniform wear.•Reliability and efficiency.•Meets RMA oil & heat resistant standards,static conductivity requirements.

Construction•Wrapped construction.•Concave sidewalls straighten out to the exact shape of the groove, ensuring uniform contact.•Rounded bottom corners relieve internal stress and offer high resistance to corner wear.•Flex-Weave polychloroprene impregated cover provides greater flexibility.•Flex-Bonded tensile cords.•Static conductive to RMA IP33-1985.•Non-self igniting.•Arched top prevents “dishing” and distortion of the tensile section, uniformly distributing the tension on the cords.

Markets/ApplicationsRecommended for drives where single belts vibrate, turn over or jump off the drive.

IdentificationDurable orange marking indicating type and dimensions.

NoteGates Hi-Power II PowerBand belts are available in A, B, C, and D cross sections.


A42 44.0 .36A43 45.0 .37A44 46.0 .38A47 49.0 .40A46 48.0 .40A48 50.0 .40A49 51.0 .42A51 53.0 .44A53 55.0 .46A54 56.0 .46A55 57.0 .47A56 58.0 .48A57 59.0 .50A58 60.0 .50A60 62.0 .52

Product No. Series 9092 - A Section“A” section PowerBand Belts are available up to 20 strands.


A62 64.0 .54A64 66.0 .56A65 67.0 .56A66 68.0 .57A68 70.0 .58A70 72.0 .61A71 73.0 .61A74 76.0 .64A75 77.0 .66A77 79.0 .66A78 80.0 .67A80 82.0 .70A81 83.0 .70A83 85.0 .71A85 87.0 .74


A90 92.0 .77A92 94.0 .80A96 98.0 .84

A100 102.0 .86A105 107.0 .90A110 112.0 .96A112 114.0 .96A120 122.0 1.04A128 130.0 1.10A136 138.0 1.17A144 146.0 1.24A158 160.0 1.36A173 175.0 1.50A180 182.0 1.56

1-800-282-8378

��

V-Belts

Product No. Series 9093 - B Section“B” section PowerBand Belts are available up to 16 strands.


B35 38.0 .52B38 41.0 .56B42 45.0 .62B43 46.0 .64B46 49.0 .68B47 50.0 .70B48 51.0 .71B50 53.0 .74B51 54.0 .76B52 55.0 .77B53 56.0 .78B54 57.0 .80B55 58.0 .81B56 59.0 .84B57 60.0 .84B58 61.0 .86B59 62.0 .87B60 63.0 .90B61 64.0 .90B62 65.0 .92B63 66.0 .94B64 67.0 .96B65 68.0 .96B66 69.0 .98B67 70.0 1.00B68 71.0 1.00B70 73.0 1.04B71 74.0 1.06B72 75.0 1.06B73 76.0 1.08B74 77.0 1.10B75 78.0 1.11


B77 80.0 1.14B78 81.0 1.16B79 82.0 1.17B80 83.0 1.18B81 84.0 1.20B82 85.0 1.21B83 86.0 1.24B84 87.0 1.25B85 88.0 1.26B86 89.0 1.28B87 90.0 1.30B88 91.0 1.30B90 93.0 1.34B92 95.0 1.36B93 96.0 1.37B95 98.0 1.41B96 99.0 1.42B97 100.0 1.44B99 102.0 1.47

B100 103.0 1.48B103 106.0 1.52B104 107.0 1.59B105 108.0 1.66B108 111.0 1.60B109 112.0 1.62B110 113.0 1.63B112 115.0 1.66B113 116.0 1.68B114 117.0 1.70B115 118.0 1.71B116 119.0 1.72B118 121.0 1.75


B120 123.0 1.78B124 127.0 1.84B128 131.0 1.90B130 133.0 1.93B133 136.0 1.97B136 139.0 2.00B138 141.0 2.04B139 142.0 2.05B141 144.0 2.09B144 147.0 2.14B148 151.0 2.20B150 153.0 2.22B154 157.0 2.28B158 161.0 2.34B160 163.0 2.37B162 165.0 2.40B168 171.0 2.49B173 176.0 2.56B180 183.0 2.66B185 188.0 2.74B190 193.0 2.82B195 198.0 2.90B210 213.0 3.11B218 219.0 3.23B225 226.0 3.34B240 241.0 3.55B255 256.0 3.77B270 271.0 4.00B300 301.0 4.44B315 316.0 4.66




�00


Hi-Power® II PowerBand® V-Belts by Gates (continued)

Product No. Series 9095 - D Section“D” section PowerBand Belts are available up to 7 strands in sizes up to and including 180”; Available up to 8 strands for belts longer than 180”.


D144 149.0 6.75D158 163.0 7.40D173 178.0 8.10D180 185.0 8.44D195 200.0 9.09D210 215.0 9.84D225 228.0 10.56D240 243.0 11.26D255 258.0 11.96D270 273.0 12.66D285 288.0 13.37D300 303.0 14.07


D315 318.0 14.77D330 333.0 15.48D345 348.0 16.18D360 363.0 16.88D390 393.0 18.29D420 423.0 19.70D450 453.0 21.10D480 483.0 22.50D540 543.0 25.33D600 603.0 28.14D660 663.0 31.13

Product No. Series 9094 - C Section“C” section PowerBand Belts are available up to 12 strands.


C60 64.0 1.56C68 72.0 1.77C72 76.0 1.88C75 79.0 1.96C78 82.0 2.04C80 84.0 2.09C81 85.0 2.11C85 89.0 2.21C87 91.0 2.26C90 94.0 2.34C96 100.0 2.50C99 103.0 2.57

C100 104.0 2.60C105 109.0 2.74C108 112.0 2.81C109 113.0 2.84


C112 116.0 2.91C120 124.0 3.12C124 128.0 3.22C126 130.0 3.28C128 132.0 3.34C136 140.0 3.54C144 148.0 3.74C146 150.0 3.79C151 155.0 3.92C158 162.0 4.11C162 166.0 4.21C173 177.0 4.50C180 184.0 4.68C185 189.0 4.81C190 194.0 4.88C195 199.0 5.07


C204 208.0 5.30C210 214.0 5.46C225 227.0 5.86C240 242.0 6.24C255 257.0 6.64C270 272.0 7.01C285 287.0 7.41C300 302.0 7.80C315 317.0 8.20C330 332.0 8.58C345 347.0 8.97C360 362.0 9.36C390 392.0 10.14C420 422.0 10.92




1-800-282-8378

�0�

V-Belts

tri-Power® V-Belts By Gates

Constructed with Gates proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.

Features/Advantages•Notched molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves.•Belt Edge is machined for even sheave groove contact resulting in less slip and wear.•Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorbtion of bending stress without cord deterioration.•Meets RMA oil and heat resistant standards,static conductivity requirements.

Markets/ApplicationsSuitable for all industrial applications, particularly where small or subminimal sheave diameters are required.

Note Tri-Power belts are available in AX, BX and CX sizes.

Product No. Series 9012 - AX Section

Size Belt O.C. Lbs. Each Part No.

AX21 23.0 .15 -AX22 24.0 .16 -AX23 25.0 .16 -AX24 26.0 .17 -AX25 27.0 .17 -AX26 28.0 .19 B0255AX27 29.0 .19 B0245AX28 30.0 .20 B0246AX29 31.0 .20 B0247AX30 32.0 .23 B0249AX31 33.0 .23 B0250AX32 34.0 .25 B0251AX33 35.0 .27 B0252AX34 36.0 .27 B0254AX35 37.0 .28 B0253AX36 38.0 .28 -AX37 39.0 .29 B0257AX38 40.0 .30 B0256AX39 41.0 .30 -AX40 42.0 .30 -AX41 43.0 .32 -AX42 44.0 .32 B0259AX43 45.0 .33 B0260AX44 46.0 .33 B0261AX45 47.0 .33 B0262AX46 48.0 .34 B0263AX47 49.0 .34 B0272AX48 50.0 .35 B0273AX49 51.0 .35 B0275


AX50 52.0 .36 B0265AX51 53.0 .36 B0266AX52 54.0 .36 B0276AX53 55.0 .37 B0277AX54 56.0 .37 B0279AX55 57.0 .37 B0280AX56 58.0 .38 -AX57 59.0 .38 B0281AX58 60.0 .39 B0282AX59 61.0 .40 B0283AX60 62.0 .40 B0270AX61 63.0 .41 B0284AX62 64.0 .41 B0286AX63 65.0 .42 B0293AX64 66.0 .42 B0271AX65 67.0 .43 -AX66 68.0 .44 -AX67 69.0 .44 -AX68 70.0 .45 -AX69 71.0 .45 -AX70 72.0 .46 -AX71 73.0 .46 -AX72 74.0 .47 -AX73 75.0 .48 -AX74 76.0 .48 B0274AX75 77.0 .49 -AX76 78.0 .49 -AX77 79.0 .49 -AX78 80.0 .50 -


AX79 81.0 .51 -AX80 82.0 .52 -AX81 83.0 .52 -AX82 84.0 .53 -AX83 85.0 .53 -AX84 86.0 .53 -AX85 87.0 .54 -AX86 88.0 .55 -AX87 89.0 .56 -AX88 90.0 .56 -AX89 91.0 .56 -AX90 92.0 .57 -AX91 93.0 .57 -AX92 94.0 .57 -AX93 95.0 .58 -AX94 96.0 .59 -AX96 98.0 .60 -AX97 99.0 .61 -AX98 100.0 .62 -

AX103 105.0 .64 -AX105 107.0 .64 -AX110 112.0 .68 -AX112 114.0 .70 -AX120 122.0 .74 -AX128 130.0 .79 -AX144 146.0 .91 -AX173 175.0 1.13 -

�0�


Tri-Power® V-Belts by Gates (continued)

Product No. Series 9013 - BX Section


BX24 27.0 .30 -BX25 28.0 .31 -BX26 29.0 .32 -BX27 30.0 .33 -BX28 31.0 .34 B0278BX29 32.0 .35 -BX30 33.0 .35 -BX31 34.0 .35 -BX32 35.0 .36 -BX33 36.0 .37 -BX34 37.0 .38 B0291BX35 38.0 .39 B0356BX36 39.0 .40 B0357BX37 40.0 .43 B0358BX38 41.0 .45 B0292BX39 42.0 .47 B0359BX40 43.0 .47 B0360BX41 44.0 .47 B0361BX42 45.0 .50 B0287BX43 46.0 .51 B0338BX44 47.0 .52 B0290BX45 48.0 .53 B0289BX46 49.0 .53 B0294BX47 50.0 .53 B0318BX48 51.0 .54 B0285BX49 52.0 .55 B0319BX50 53.0 .64 B0288BX51 54.0 .65 B0320BX52 55.0 .66 B0296BX53 56.0 .67 B0321BX54 57.0 .63 B0325BX55 58.0 .69 B0295BX56 59.0 .69 B0298BX57 60.0 .70 B0326BX58 61.0 .71 B0328BX59 62.0 .73 B0297


BX60 63.0 .74 B0301BX61 64.0 .75 B0300BX62 65.0 .76 B0299BX63 66.0 .77 B0329BX64 67.0 .78 B0302BX65 68.0 .79 B0330BX66 69.0 .80 B0304BX67 70.0 .81 B0331BX68 71.0 .82 B0305BX69 72.0 .83 B0307BX70 73.0 .83 B0332BX71 74.0 .84 B0306BX72 75.0 .84 B0333BX73 76.0 .85 B0334BX74 77.0 .85 B0335BX75 78.0 .86 B0310BX76 79.0 .87 B0303BX77 80.0 .87 B0308BX78 81.0 .88 B0309BX79 82.0 .89 B0311BX80 83.0 .90 B0313BX81 84.0 .91 B0312BX82 85.0 .92 B0315BX83 86.0 .93 B0314BX84 87.0 .94 B0316BX85 88.0 .95 B0317BX86 89.0 .96 B0342BX87 90.0 .97 B0343BX88 91.0 .97 B0344BX89 92.0 .98 B0345BX90 93.0 .99 B0322BX91 94.0 1.00 B0323BX92 95.0 1.01 -BX93 96.0 1.01 -BX94 97.0 1.02 -BX95 98.0 1.03 -


BX96 99.0 1.04 -BX97 100.0 1.05 -BX98 101.0 1.06 -BX99 102.0 1.07 -

BX100 103.0 1.08 -BX103 106.0 1.11 B0324BX105 108.0 1.14 -BX106 109.0 1.17 -BX108 111.0 1.18 -BX110 113.0 1.20 -BX112 115.0 1.24 -BX113 116.0 1.24 -BX115 118.0 1.25 -BX116 119.0 1.27 -BX120 123.0 1.30 B0327BX124 127.0 1.37 -BX128 131.0 1.38 -BX133 136.0 1.38 -BX136 139.0 1.42 -BX140 143.0 1.42 -BX144 147.0 1.46 -BX150 153.0 1.48 -BX158 161.0 1.56 -BX162 165.0 1.60 -BX173 176.0 1.71 -BX180 183.0 1.77 -BX195 198.0 1.92 -BX205 208.0 2.31 -BX210 213.0 2.51 -BX225 227.0 2.74 -BX255 257.0 2.85 -BX270 272.0 3.02 -BX300 302.0 4.02 -

Size Belt O.C. Lbs. Each

CX51 55.0 1.02CX60 64.0 1.07CX68 72.0 1.29CX75 79.0 1.35CX81 85.0 1.41CX85 89.0 1.47CX90 94.0 1.55CX96 100.0 1.65

CX100 104.0 1.72CX101 105.0 1.74CX105 109.0 1.80CX106 110.0 1.82


CX109 113.0 1.87CX112 116.0 1.92CX115 119.0 1.97CX120 124.0 2.07CX123 127.0 2.10CX128 132.0 2.18CX133 137.0 2.26CX136 140.0 2.31CX144 148.0 2.44CX150 154.0 2.56CX158 162.0 2.67CX162 166.0 2.74


CX173 177.0 2.92CX180 184.0 3.04CX187 191.0 3.15CX190 194.0 3.20CX195 199.0 3.29CX210 214.0 3.53CX225 227.0 5.33CX240 242.0 5.64CX255 257.0 5.95CX270 272.0 6.26CX300 302.0 6.88CX330 332.0 6.90CX360 362.0 8.55

Product No. Series 9014 - CX Section

1-800-282-8378

�0�

V-Belts

Truflex® Light Duty V-Belts by Gates

Truflex gives optimum service on fractional horsepower V belt drives including back idler applications.Truflex belts feature superior length stability for minimal take-up requirements.

Features•Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life.•Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.•The Flex-Weave® Cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat.•Meets RMA oil and heat resistant standards and RMA static conductivity requirements.

Advantages•Thanks to its thin profile, Truflex is recommended for smaller diameter drives.•Ideal for back idler applications.•Extremely flexible.•Smooth, quiet operation.•Economical drives.•Superior length stability.

Markets/ApplicationsSuitable for all industrial light duty applications, usually using fractional horsepower (FHP) motors, such as powered cultivators, lawn mowers, electrical household appliances and HVAC equipment.

Identification - Durable molded label indicating size and type.

Note - Truflex belts are offered in cross sections 2L (0), 3L (1), 4L (2), 5L (3).


2L100 10.0 .022L110 11.0 .022L120 12.0 .022L130 13.0 .032L140 14.0 .032L150 15.0 .032L160 16.0 .032L170 17.0 .032L180 18.0 .03

Product No. Series 8400 - 0 or 2L Section


2L190 19.0 .032L200 20.0 .042L210 21.0 .042L230 23.0 .042L240 24.0 .042L250 25.0 .042L260 26.0 .042L270 27.0 .042L280 28.0 .05


2L290 29.0 .052L310 31.0 .052L340 34.0 .062L350 35.0 .062L360 36.0 .062L380 38.0 .062L460 46.0 .07




�0�


Truflex® V-Belts by Gates (continued)


3L110 11.0 .04 B03953L120 12.0 .05 -3L130 13.0 .05 -3L140 14.0 .05 -3L150 15.0 .06 -3L160 16.0 .06 B03963L170 17.0 .07 -3L180 18.0 .07 B04023L190 19.0 .07 B04033L200 20.0 .07 B04043L210 21.0 .08 B04053L220 22.0 .08 B04063L230 23.0 .08 B04073L240 24.0 .08 B04083L245 24.5 .09 -3L250 25.0 .09 B04093L255 25.5 .09 -3L260 26.0 .09 B04103L265 26.5 .09 -3L270 27.0 .09 B04113L275 27.5 .10 -3L280 28.0 .10 B04123L285 28.5 .10 -3L290 29.0 .10 B04133L293 29.3 .10 -


3L300 30.0 .10 B04143L310 31.0 .11 B04153L320 32.0 .11 B04163L330 33.0 .11 B04173L340 34.0 .12 B04183L345 34.5 .12 -3L350 35.0 .12 B04193L360 36.0 .13 B04203L370 37.0 .14 B04213L380 38.0 .13 B04223L390 39.0 .14 B04233L400 40.0 .14 B04243L410 41.0 .15 B04253L415 41.5 .15 -3L420 42.0 .15 B04263L430 43.0 .16 B04273L440 44.0 .16 B04283L450 45.0 .16 B04293L460 46.0 .17 B04303L470 47.0 .17 B04313L480 48.0 .17 B04323L490 49.0 .18 B04333L500 50.0 .18 -3L510 51.0 .18 B04353L520 52.0 .18 B0436


3L530 53.0 .19 B04373L540 54.0 .19 B04383L550 55.0 .19 B04393L560 56.0 .19 B04403L570 57.0 .20 -3L580 58.0 .20 -3L590 59.0 .20 B04433L600 60.0 .21 -3L610 61.0 .21 -3L620 62.0 .21 -3L630 63.0 .22 -3L640 64.0 .22 -3L650 65.0 .22 -3L660 66.0 .23 -3L670 67.0 .23 -3L675 67.5 .23 -3L680 68.0 .23 -3L690 69.0 .23 -3L700 70.0 .23 -3L710 71.0 .23 -3L730 73.0 .24 -3L740 74.0 .26 -

Product No. Series 8400 - 1 OR 3L Section


4L150 15.0 .08 -4L160 16.0 .09 -4L170 17.0 .10 B04484L180 18.0 .10 B04494L188 18.8 .11 -4L190 19.0 .11 -4L200 20.0 .11 B04514L210 21.0 .11 B04524L215 21.5 .12 -4L220 22.0 .12 B04534L230 23.0 .13 B04544L235 23.5 .13 -4L240 24.0 .13 B04554L250 25.0 .14 B04574L255 25.5 .14 -4L260 26.0 .14 B04584L270 27.0 .15 B04594L275 27.5 .15 -4L280 28.0 .15 B04604L285 28.5 .16 -4L290 29.0 .16 B0461


4L295 29.5 .17 -4L300 30.0 .17 B04624L310 31.0 .17 B04634L318 31.8 .18 -4L320 32.0 .18 B04644L328 32.8 .18 -4L330 33.0 .18 B04654L333 33.3 .19 -4L338 33.8 .19 -4L340 34.0 .18 B04664L346 34.5 .19 -4L350 35.0 .19 B04674L360 36.0 .20 B04684L370 37.0 .20 B04694L380 38.0 .21 B04704L390 39.0 .21 B04714L400 40.0 .23 B04724L405 40.5 .24 -4L410 41.0 .23 B04734L420 42.0 .24 B04744L430 43.0 .24 B0475


4L440 44.0 .25 B04764L450 45.0 .25 B04774L460 46.0 .26 B04784L470 47.0 .26 B04794L475 47.5 .27 -4L480 48.0 .27 B04804L490 49.0 .27 B04814L500 50.0 .28 B04824L510 51.0 .28 B04834L520 52.0 .28 -4L530 53.0 .29 B04854L540 54.0 .29 B04864L550 55.0 .30 B04874L560 56.0 .30 B04884L570 57.0 .31 B04894L580 58.0 .31 -4L590 59.0 .32 B04914L600 60.0 .32 B04924L610 61.0 .33 B04934L620 62.0 .34 -4L630 63.0 .34 B0495


1-800-282-8378

�0�

V-Belts

Product No. Series 8400 - 2 OR 4L Section (continued)


4L640 64.0 .35 -4L650 65.0 .36 -4L660 66.0 .36 -4L670 67.0 .37 B04994L680 68.0 .37 -4L690 69.0 .37 -4L700 70.0 .38 B05024L710 71.0 .38 -4L720 72.0 .42 -4L730 73.0 .42 -4L740 74.0 .43 -4L750 75.0 .43 -4L760 76.0 .43 -


4L770 77.0 .43 -4L780 78.0 .43 -4L790 79.0 .43 -4L800 80.0 .44 -4L810 81.0 .45 -4L820 82.0 .45 -4L830 83.0 .46 -4L840 84.0 .47 -4L850 85.0 .47 -4L860 86.0 .47 -4L870 87.0 .48 -4L880 88.0 .50 -4L890 89.0 .50 -


4L900 90.0 .51 -4L910 91.0 .51 -4L920 92.0 .52 -4L930 93.0 .52 -4L940 94.0 .52 -4L950 95.0 .53 -4L960 96.0 .54 -4L970 97.0 .54 -4L980 98.0 .55 -4L990 99.0 .55 -

4L1000 100.0 .56 -


5L230 23.0 .21 -5L240 24.0 .22 -5L250 25.0 .22 -5L260 26.0 .23 -5L265 26.5 .24 -5L270 27.0 .24 -5L280 28.0 .26 -5L290 29.0 .26 -5L300 30.0 .27 -5L310 31.0 .28 -5L320 32.0 .30 -5L330 33.0 .30 B05435L340 34.0 .31 -5L350 35.0 .32 -5L355 35.5 .32 -5L360 36.0 .33 B05465L370 37.0 .34 -5L380 38.0 .35 B05485L390 39.0 .35 B05495L400 40.0 .36 -5L410 41.0 .38 B05515L420 42.0 .38 B05525L430 43.0 .39 B05535L440 44.0 .40 B05545L450 45.0 .41 B05555L460 46.0 .42 B05565L470 47.0 .43 B0557


5L480 48.0 .43 B05585L490 49.0 .44 B05595L500 50.0 .45 -5L510 51.0 .47 B05615L520 52.0 .47 B05625L530 53.0 .47 B05635L540 54.0 .48 B05645L550 55.0 .49 B05655L560 56.0 .50 B05665L570 57.0 .50 B05675L580 58.0 .51 B05685L590 59.0 .52 B05695L600 60.0 .53 -5L610 61.0 .54 -5L620 62.0 .55 -5L630 63.0 .56 B05735L640 64.0 .61 -5L650 65.0 .61 -5L660 66.0 .62 -5L670 67.0 .63 -5L680 68.0 .63 -5L690 69.0 .63 -5L700 70.0 .63 -5L710 71.0 .66 -5L720 72.0 .67 -5L730 73.0 .68 -5L740 74.0 .68 -


5L750 75.0 .68 -5L760 76.0 .68 -5L770 77.0 .69 -5L780 78.0 .69 -5L790 79.0 .72 -5L800 80.0 .72 -5L810 81.0 .72 -5L820 82.0 .73 -5L830 83.0 .73 -5L840 84.0 .76 -5L850 85.0 .77 -5L860 86.0 .78 -5L870 87.0 .79 -5L880 88.0 .80 -5L890 89.0 .81 -5L900 90.0 .81 -5L910 91.0 .82 -5L920 92.0 .83 -5L930 93.0 .83 -5L940 94.0 .84 -5L950 95.0 .85 -5L960 96.0 .85 -5L970 97.0 .86 -5L980 98.0 .87 -5L990 99.0 .88 -

5L1000 100.0 .89 -


�0�


Predator® Powerband® V-Belts by Gates

Specifically designed for aggressive applications, this extra heavy-duty belt construction provides extraordinary high impact strength, capacity, and wear resistance. This is the best belt on the market today for extra tough and high horsepower applications. Predator belts are well suited as replacement belts for applications exposed to pulsating loads or heavy shock loads, such as mining, agriculture, wood processing, oil field equipment, heavy construction and sand/gravel operations.

Features•Aramid Tensile Cords combine limited stretch with extraordinary strength and durability that is pound-for-pound stronger than steel•Bareback Cover resists debris and allows the belt to slip under extreme shock load conditions, reducing heat buildup and prolonging belt life•Multiple layer Tie Band provides excellent lateral rigidity to prevent belts from turning over or from coming off the drive•Gates Curves provide proper cord support and full contact with the sheave-groove for equal loading, uniform wear, and increased belt life•Meets RMA oil and heat resistant standards

Note - The part number is constructed by placing the number of strands required, followed by a slash ( / ) in front of the belt size. For example 5/8VP3000 represents an 8VP3000 with 5 strands.

Model Belt O.C. Lbs. Each

3/CP85 89.0 7.143/CP90 94.0 7.473/CP99 103.0 8.06

Product No. Series 9184 - Section CP


3VP450 45.0 .283VP475 47.5 .293VP500 50.0 .303VP530 53.0 .333VP560 56.0 .343VP600 60.0 .373VP630 63.0 .403VP670 67.0 .413VP710 71.0 .443VP750 75.0 .463VP800 80.0 .503VP850 85.0 .533VP900 90.0 .563VP950 95.0 .60

3VP1000 100.0 .633VP1060 106.0 .663VP1120 112.0 .703VP1180 118.0 .743VP1250 125.0 .793VP1320 132.0 .833VP1400 140.0 .88

Product No. Series 9180 - Section 3VP


5VP600 60 .965VP630 63 1.005VP670 67 1.045VP710 71 1.185VP750 75 1.215VP800 80 1.255VP850 85 1.365VP870 87 1.405VP900 90 1.395VP950 95 1.50

5VP1000 100 1.575VP1060 106 1.685VP1120 112 1.795VP1180 118 1.865VP1250 125 2.005VP1320 132 2.115VP1400 140 2.255VP1500 150 2.395VP1600 160 2.575VP1700 170 2.755VP1800 180 2.895VP1900 190 3.075VP2000 200 3.255VP2030 203 3.305VP2120 212 3.465VP2240 224 3.685VP2360 236 3.895VP2500 250 4.075VP2650 265 4.325VP2800 280 4.575VP3000 300 4.895VP3150 315 5.185VP3350 335 5.505VP3550 355 5.79



8VP1000 100 3.908VP1060 106 4.158VP1120 112 4.428VP1180 118 4.678VP1250 125 5.008VP1320 132 5.258VP1400 140 5.588VP1500 150 6.008VP1600 160 6.338VP1700 170 6.758VP1800 180 7.258VP1900 190 7.658VP2000 200 8.008VP2120 212 8.508VP2240 224 9.008VP2360 236 9.428VP2500 250 10.008VP2650 265 10.588VP2800 280 11.338VP3000 300 12.088VP3150 315 12.758VP3350 335 13.588VP3550 355 14.338VP3750 375 15.088VP4000 400 16.088VP4250 425 17.088VP4500 450 18.088VP4750 475 19.178VP5000 500 20.178VP5600 560 22.758VP6000 660 24.42


1-800-282-8378

�0�

V-BeltSelection

Super HC® Super HC® Molded Notch PowerBand®

Predator® PowerBand®

Hi-Power® II PowerBand®

Tri-Power®

Truflex® V-Belts

Power Curve® PowerBack™ BladeRunner® Round Endless Belts

Micro-V® Belts PowerRated® V-Belts Polyflex® Belts Polyflex® JB® Belts

Multi-Speed Belts Tubewinder Belts Powercord® Belts Speed Flex® Belts

Carry Band® Belts Nu-T-Link® Easy Splice V-Belting

Super HC® PowerBand®

Super HC® Molded Notch

Hi-Power® II

Predator® Single Hi-Power® II Dubl-V Belts

Metric Power V-Belts

Poly Chain® GT® Carbon™

Long-Length Poly Chain® GT® 2 Belting

Poly Chain® GT® Belts - 8M Short Length

Poly Chain® HTD®

Poly Chain® GT® Belts - 5M

PowerGrip® GT® 2 Belts -

8M and 14M

PowerGrip® GT® 2 Twin Power ® Belts - 8M and

14M

PowerGrip® GT® 2 Belts -

2MR and 3MR

PowerGrip® GT® 2 Belts - 5MR

PowerGrip® GT® 2 Twin Power® - 3MR and 5MR

Long-Length PowerGrip® GT® 2

Belting

PowerGrip® HTD® Belts

PowerGrip® HTD®Twin Power® Belts

Long-LengthPowerGrip®

HTD Belting

PowerGrip® Timing Belts

PowerGrip® GT® TruMotion™ Belts

PowerGrip® Twin Power® Timing Belts

Long-Length PowerGrip®

Timing Belts

PowerGrip® HTD®TruMotion™ Belts

PowerGrip® TimingTruMotion™ Belts

Cotton Cleaner Belts Curve Saw Poly Chain® GT® 2 Belts

Eliminator® Belts Synchro-Power® Polyurethane

Blue Belts

Synchro-Power® Polyurethane

Twin-Power® Blue Belts

V-Belt Selection Guide




Documents

V-Belts · 2011. 5. 12. · V-Belts Super HC® Molded Notch PowerBand® V-Belts by Gates The PowerBand construction allows multiple belts to function as a single unit, with even