The Utility System is the most versatile utility mounting solution on the market.

The

right

way

to a

ttach

alm

ost a

nyth

ing

to m

etal

roof

s!

S-5!

® U

tility

Sys

tem

888-

825-

3432

| w

ww

.S-5

.com

|

S-5!® Utility SystemThe new S-5!® Utility System is the most versatile utility mounting solution for standing seam metal roofs, and is exclusively from S-5!

The Utility System enables easy attachment of almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, and more.

The Utility System utilizes round-point setscrews to ensure a non-penetrating attachment. The setscrews will slightly dimple the metal seam material without piercing it, leaving roof manufacturers' warranties intact.

All included hardware is stainless steel. Please visit www.S-5.com for more information including CAD details, metallurgical compatibilities and specifications. The S-5! Utility System has been tested for load-to-failure results on most major brands and profiles of standing seam roofing.

S-5! mini clamps are not compatible with, and should not be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow retention systems.

0.43" x 0.71"(10.92 x 18.03 mm)

1.18"(29.97 mm)

0.59"(15.01 mm)

2.50"(63.50 mm)

0.16"(4.06 mm)

0.49"(12.45 mm)

0.55"(13.97 mm)0.47"

(11.94 mm)

0.48"(12.19 mm)

1.34"(34.04 mm)

1.00"(25.40 mm)

Utility System Components(sold separately)

Flanged Mini ClampsWith a selection of three uniquely designed flanged mini clamps, the Utility System can be mounted to every major standing seam metal roof profile. The S-5-USF Mini fits 85% of U.S. standing seam profiles including most snap together and machine folded seams. The S-5-EF Mini is specifically for double-fold standing seams, while the S-5-ZF Mini fits bulb-shaped profiles.

Clamp installation is simple. Just place the flanged mini clamp on the seam and tighten the round-point setscrew. Go to www.S-5.com/tools for information about properly attaching S-5!® clamps.

S-5-FAIf the metal roof profile isn't compatible with the three flanged clamps mentioned above, the Utility System can utilize the S-5-FA to quickly provide a flanged component to any of the other S-5! mini clamps, such as the S-5-N Mini for 1" nail-strip profiles, the S-5-T Mini for T-shaped profiles, the S-5-Q Mini for large bulb-shaped profiles, and S-5-K Grip Mini for bulb snap-together profiles.

Dual Grip StrutThe Dual Grip Strut* conveniently comes in 3.00" and 27.00" lengths, enabling a wide variety of attachment needs. Custom lengths are also available. It can be easily rotated 360° on the mini clamps for orientation versatility only S-5! can provide!*Not for use with solar rails. US Patent D639,143S

1.71"(43.43 mm)

0.84"(21.34 mm)

0.55"(13.97 mm)

1.08"(27.43 mm)

1.38"(35.05 mm)

0.34" x 1.10"(8.64 x 27.94 mm)

0.52"(13.21 mm)

1.50"(38.10 mm)

0.43" x 1.00"(10.92 x 25.40 mm)

TITLE

DRAWING NO. DRAWN BY

Universal Flanged Clamp

USF81-A-0-A CCD DMMH 05/29/2013DATE

MATERIAL:

SUPPLIED HARDWARE:

OTHER:

6061 T6

NA

The Right Way!

METAL ROOF INNOVATIONS, LTD.8655 TABLE BUTTE RD

COLORADO SPRINGS, CO 80908719-495-0518

719-495-0045 (FAX)

EST ASSEMBLY WEIGHT :

SCALE:

3/8-24 x .8" Round Point Setcrew

S-5!® PRODUCTS ARE PROTECTED BY MULTIPLE U.S. PATENTS INCLUDING 5,228,248, 5,983,588 AND6,164,033 (OTHERS ISSUED AND PENDING). EUROPEAN PATENTS ARE ALSO APPLIED FOR AND PENDING

UNDER THE PATENT COOPERATION TREATY WITH DIVISIONAL FILING RIGHTS RETAINED. METAL ROOFINNOVATIONS, LTD. (LICENSOR OF S-5!® TECHNOLOGY) AGGRESSIVELY PROSECUTES PATENT

INFRINGEMENT.

Example ApplicationsAdditional Clamp Options

S-5-EF MiniVisit www.S-5.com for dimensions.

S-5-ZF Mini

S-5-USF Mini

Dual Grip Strut

S-5-FA

3.00", 27.00" and custom lengths

are available

Distributed byS-5!® Warning! Please use this product responsibly!Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for complete information on patents and trademarks. For maximum holding strength, setscrews should be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be verified using a calibrated torque wrench between 160 and 180 inch pounds when used on 22ga steel, and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5! website at www.S-5.com for published data regarding holding strength.

Copyright 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected. S-5! aggressively protects its patents, trademarks, and copyrights. Version 032017.

Attach almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, and more.