UPS-X - Solar Stik · 2016. 9. 21. · Solar Stik PRO-Verters are selected based on power demands of the intended load. Multiple PRO-Verters and energy storage banks can be used in

UPS-X

[email protected] IN USA

© 2016 Solar Stik, Inc. All Rights Reserved. Solar Stik is a registered trademark of Solar Stik, Inc. SS20160824

Features• Seamless power—16 ms transfer time • Scalable—support any load for any length of time • Expeditionary—extremely compact • Plug & Play• Transportable by land, sea, and aircraft• Durable and weather resistant

X-TENDED | X-PANDED

Power failure is NOT an optionIt’s more than just keeping the lights on. The Solar Stik Uninterruptible Power

Supply (UPS)-X keeps people alive in the field, keeps communication

networks online, and is a reliable energy supply solution adaptable to all

situations and continuous power needs.

Real-world situations are dynamic—even when a primary power source is

working, there can be unexpected power interruptions and fluctuations. The

UPS-X is a scalable system that can be configured to:

• Secure silent operation periods

• Reduce generator fuel consumption

• Ensure continuity of power during interruptions

The UPS-X is a rugged solution that enhances power for any operational

setting, weather element, or punishing climatic condition.

X-tended Energy StorageHours to days...not minutes, or seconds. Using proven Advanced

Rechargeable Energy Storage (ARES) battery technology, the Solar Stik

UPS-X will support ALL operations for the duration—not just the minimum

or critical loads for minutes—of primary power source outages. The battery

chemistry of the Solar Stik UPS-X can be tailored for any application, be it

expeditionary or a permanent fixture. The UPS-X architecture is designed for

ease of use. Should more energy storage capacity become necessary, ARES

modules can be added to the UPS-X while it’s in the field with simple Plug &

Play connections.

X-panded Power ManagementPower management for the Solar Stik UPS-X is handled through the Portable

Remote Operation-Inverter/Charger (PRO-Verter), which manages all incoming

and outgoing grid, utility, or generator power, ensuring clean, continuous

power to the load. PRO-Verters are made to fit user requirements, and include

choices for maximum required power processing, generator type, number

and type of AC output connections. Multiple PRO-Verters can be added to

increase functionality of a single Solar Stik UPS-X.

X-perience in the FieldSolar Stik has provided modular, scalable portable power systems to meet

users’ critical operation needs for more than 10 years. The UPS-X is the

union of experience and ongoing communication with operators in the field to

produce a superior uninterruptible power supply solution.

Power Source

Power Management Load

Energy Storage

X-pandedPower Management

X-tendedEnergy Storage

UPS-X



Hours of Battery Back-up



Number of LF-1300s (LFP)

SteadyLoad 2 4 6 8 10 12

500 W 5.2 10.4 15.6 20.8 26.0 31.2

1000 W 2.6 5.2 7.8 10.4 13.0 15.6

1500 W 1.7 3.5 5.2 6.9 8.7 10.4

2000 W 1.3 2.6 3.9 5.2 6.5 7.8

4000 W 0.7 1.3 1.9 2.6 3.3 3.9

Number of Li Expander Pak 2400s (LFP)


500 W 9.6 19.2 28.8 38.4 48.0 57.6

1000 W 4.8 9.6 14.4 19.2 24.0 28.8

1500 W 3.2 6.4 9.6 12.8 16.0 19.2

2000 W 2.4 4.8 7.2 9.6 12.0 14.4

4000 W 1.2 2.4 3.6 4.8 6.0 7.2

Number of Expander Pak 1000s (VRLA)


500 W 4.0 8.0 12.0 16.0 20.0 24.0

1000 W 2.0 4.0 6.0 8.0 10.0 12.0

1500 W 1.3 2.7 4.0 5.3 6.7 8.0

2000 W 1.0 2.0 3.0 4.0 5.0 6.0

4000 W 0.5 1.0 1.5 2.0 2.5 3.0

ATTENTION:

DO NOT MIX DIFFERENT BATTERY CHEMISTRIES IN THE SAME

CONFIGURATION.

DIFFERENT CHEMISTRIES ALSO HAVE DIFFERENT TRANSPORT

RESTRICTIONS. CONSULT DOT REGULATIONS FOR SPECIFIC

BATTERY TRANSPORT RULES.

LF-1300

Expander Pak 1000

Li Expander Pak 2400

Configuring Energy StorageThe heart of every Solar Stik UPS-X system is its energy storage—

the battery bank. The configuration of the energy storage modules

(ESMs) for the UPS-X depends directly on the hours of battery

runtime needed to support the given load and the application of

the system, whether expeditionary or permanent.

Solar Stik offers durable, field-tested, proven lithium and lead-acid,

rechargeable ESMs. Each type of ESM affords its own advantages

based on the application.

The tables to the right are matrices for determining the number of

ESMs (of each chemistry type) required to support a given load for

various amounts of time.

Note: Adding more load to any UPS-X will result in a shorter

battery-only runtime, while adding modules to the ESM bank will

increase battery-only runtime.

• Lithium iron phosphate (LiFePO4)

• Lead-acid

Energy Storage Module (ESM)

UPS-X



Step #4 - AC Input (Check one) *Refer to Port Types for more info

Step #5 - AC Output (Check one) *Refer to Port Types for more info

Step #3 - Generator Type (Check one)

Step #6- Number of AC Output Connections (Check one)

Step #1 - Maximum power processing (Input/Output Watts-AC Voltage)

24VDC 3000-120 5000-120 5000-230 5000-240 5000-120/208 7000-120

Step #2 - Auto Generator Start/Stop capability

Yes AGS

No Leave blank

PRO-Verter SelectionThe PRO-Verter manages all incoming and outgoing power and can be customized to fit

your power requirements. Follow the steps below to configure a PRO-Verter. The feature or

capability chosen in each step becomes part of the PRO-Verter name reading left to right.

24VDC PRO-Verter 3000 120 AGS-

*Port Types (AC Input and Output)

ACInput

5-15P 5-20P

W

GB

L5-30P

W

G

B

L5-50P

X

Y G

Z

L15-20P

X

GW

Y

L14-30P

ACOutput

5-15R 5-20R

W

G B

L5-30R

X

G W

Y

L5-50R

X

G W

Y

L15-20R

X

YG

Z

L14-30R

Amps 15A 20A 30A 50A 20A 30A

Voltage 125VAC 125VAC 125VAC 125VAC 250VAC 125/250VAC

MEP-831A or Yanmar MEP-802A Honda EU3000 INI AMMPS No Generator Other:

5-15P 5-20P L5-30P L5-50P L15-20P L14-30P Other:

5-15R 5-20R L5-30R L5-50R L15-20R L14-30R Other:

1 2 3

UPS-X



24VDC LF-1300 (x5) *Stacked

X-tended

24VDC PRO-Verter 5000-120

GRID POWER

24VDC LF-1300 (x5) *Stacked

Inter-Connect Strip

EXTRA

Example using lithium iron phosphate 24VDC LF-1300s

LOAD120VAC

ARES 24VDC ExpanderPak 1000 (x8)


GRID POWER

Example using lead-acid ARES 24VDC Expander Pak 1000s, can be used with or without the Inter-Connect Strip

LOAD120VAC

UPS-X



LOAD120VAC

LOAD120VAC

LOAD240VAC

LOAD240VAC



24VDC Power Hub 2400

*Option 1120V Gen

*Option 2240V Gen



FUEL GENPOWER

POWERGENERATION

EXTRA

EXTRA

EXTRA

Solar Stik PRO-Verters are selected based on power demands of the intended load.Multiple PRO-Verters and energy storage banks can be used in concert when high power is required.

Solar Stik UPS-X can be configured or adapted to multiple conditions.It is compatible with all Solar Stik architecture and components, such as Power Hubs.

Inter-Connect Strip

Inter-Connect Strip

Inter-Connect Strip

*Connection depends on

Option 1 or 2

*ESM (x5)

*ESM (x5)

*ESM (x5)

*ESM (x5)

Solar Wind Hydro Grid Fuel Gen

RenewablePower Generation

OptionsOther Power

Generation Options

*Depending on AC Output

X-panded



24VDC LF-1300

Safety

Over Voltage Limit 3.9 V (per cell)

Under Voltage Limit 2.0 V (per cell)

Over Current Protection 70 A

Over Temp Protection Activates @ 91 ºC +4 ºC (196 ºF +39 ºF)

Environmental

Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)

Storage Temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF)

Weights and Dimensions

Dimensions 18.2 x 17.6 x 3.9 in (46.3 x 44.7 x 9.91 cm)

Weight 38 lb (17.3 kg)

General

Energy Storage 1.3 kWh

Energy Density 75 Wh/kg

Battery Nominal 26 V Lithium Iron Phosphate (LiFePO4)

Amp Hour 1 Sections of 54 Ah

Operating Voltage 26 VDC

Max Discharge 50 A Continuous (Thermally Protected)

Max Pulse Discharge 300 A for 5 Seconds

User Interface- LCD State-of-charge (SOC) Indicator

- LCD State-of-health (SOH) Indicator

Cycle Life 2000 (80% Depth of Discharge)

Memory No Memory Effect

Transport Class 9 Transport by Ground or Air Cargo Only

Case Hard Plastic / Over Mold

Warranty TBD

Features• 1.3 kWh of energy

• Configured for 24V operation

• State-of-Charge and State-of-Health indicator

• One-person transport

• Waterproof – IP-67 compliant

• Ruggedized construction

• Integrated stacking and strapping features

• Highest energy density of any battery in its class

• Capable of cycling up to 2000 Cycles

• 19 inch rack compatible



24VDC Li Expander Pak 2400

Case Color Options

Tan* Black* Indicates standard color

Features• 2.4 kWh of energy storage

• Scalable system architecture

• Transportable by land, sea and cargo aircraft

• Capable of over 3000 cycles

• Durable and weather resistant

• Plug & Play

Connections

DC24 VDC Lithium Inter-Connect port (cable storage on faceplate

inside case)

Battery Data External RJ-45 Ethernet port

Safety

Master Breaker 50 A Master circuit breaker supports max load & charge rate of 1200 W

Over Voltage 29.2 V

Under Voltage 21.6 V

Over Temp Protection Activates @ 71 °C (+158 °F)

General

Energy Storage 2.4 kWh reserve capacity (100 amp-hour at 24 VDC)

Energy Density 73 Wh/Kg

Batteries Lithium Iron Phosphate (LiFePO4)

Operating Voltage 24.0–28.8VDC

Average Voltage 25.6 VDC

Max Discharge 100 A continuous

Self-Discharge <5% per month

Cycle Life 3000 at 1C to 80% of initial capacity

Memory No Memory Effect

Controls Automatic battery management system (BMS)

Construction- Pelican 1620 case

- Built to MIL-810G standards

Certifications CE testing is pending

Warranty 1-year limited warranty of materials and workmanship




Environmental


Storage Temperature -30 °C to +70 °C (-22 °F to +158 °F)



24VDC Expander Pak 1000

Connections

Post Terminal (1) Interior 24 V Post Terminals with ergonomic twist knobs

Inter-Connect Port (2) Exterior 24 VDC

Safety

Breakers - 100 A master circuit breaker

General

Energy Storage 1.0 kWh

Energy Density 31.25 Wh/Kg

Battery (2) 12 V Lead-acid AGM (Series connection)

Amp Hour 40 Ah

Operating Voltage 21.0–29.0 VDC

Cycle Life 500 (80% Depth of Discharge)

Features- State-of-charge (SOC) LED indicator

- Cycle life indicator display

User Interface LCD and push-button menu controls

Case Pelican 1440 case with lid organizer

Warranty 1-year materials and workmanship


Dimensions 19.70 x 12.00 x 18.00 in (50 x 30.5 x 45.7 cm)


Environmental


Storage Temperature +10 °C to +40 °C (+50 °F to +104 °F)

Features• 1.0 kWh of energy storage

• Scalable system architecture

• Transportable by land, sea, and cargo aircraft

• State-of-Charge and cycle life indicator

• Durable and weather-proof

• Plug & Play

Case Color Options




24VDC Power Hub 2400

General

Solar Charge Control 2.4 kW (max) MPPT (3 x 800 W - 12/24 VDC)

Normal Operating Voltage 24 VDC

Case Pelican 1600 case

Cooling - (2) Internal Fan and Case Brow Venting

Warranty 1-year materials and workmanship




Environmental

Operating Temperature -50 °C to + 75 °C (-58 °F to +167 °F)

Connections

Solar Port - (6) 24 VDC

Wind Port - (3) 24 VDC

NATO - (1) NATO 24 V Slave

Inter-Connect- (1) 24VDC PRO-VERTER / BATTERY

- (2) 24VDC LOAD / BUS

Features• Fully automatic operation

• Input up to 2.4 kW of PV

• LCD Display

• Plug & Play

• Scalable system

• Remote monitoring capability (Optional)

• Optimized for PAM Panels and Solar Stik 200/400

Case Color Options


PowerManagement

Load

Solar Wind Hydro Grid Fuel Gen

EnergyStorage

Power Source

Lead-acid

Li-ionphosphate

Energy Storage Options

Power Generation Options



Customer Equipment Outline

Voltage Requirements / Equipment 1 (Check all that apply):

12 VDC 24 VDC 120 VAC 240 VAC Other:

Load (Amps) (Peak/Average): Load (Watts) (Peak/Average):

Voltage Requirements / Equipment 2 (Check all that apply):

12 VDC 24 VDC 120 VAC 240 VAC Other:

Load (Amps) (Peak/Average): Load (Watts) (Peak/Average):

What needs power?

Company:

Phone:

Location

City: State: Country:

Other (e.g. Boat, RV):

Average Temperature

High (ºF) : Low (ºF):

General Weather Conditions (e.g. Windy, Sunny):

Run Time: 24/7 Other (please specify):

Sound Restrictions: Yes No Remote Monitoring: Yes No

Personnel: Manned Unmanned Mobility: Permanent Temporary

Transport Restrictions: Yes No

Lead-acid Lithium-ion Yes No

1 Man 2 Man 4 Man Fork Lift

POC Name:

E-mail:

Application

Operation Parameters (Run time / Environment / Special needs i.e. Remote monitoring)

Power Storage Option (Check one) Hybrid Power Option (DC or AC Generator capable)

Maximum Allowable Mobility/Lift (Check one)

Other

DC

DC

AC

AC



NOTES



Documents

UPS-X - Solar Stik · 2016. 9. 21. · Solar Stik PRO-Verters are selected based on power demands of the intended load. Multiple PRO-Verters and energy storage banks can be used in