Uponor Radiant Heating/Cooling katalog UFH-C 2012 eng.pdf · 6 EEI-Int-RHC-01.12 Radiant heating and cooling systems - for all areas of application the right system Radiant heating

I N D O O R C L I M AT E S O LU T I O N S

P R O D U C T C ATA LO G 2 0 1 2

Uponor Radiant Heating/Cooling

Uponor Renovationsystem Minitec

Uponor Minitec - System components and accessories ·························································· 8

Uponor lightweight panel Siccus

Uponor Siccus - System components and accessories ···························································· 11

Uponor pipe positioning panel Tecto

Uponor Tecto - System components and accessories ······························································ 14

Uponor self attaching system

Uponor self attaching system - System components and accessories ····································· 19

Uponor stapler and clamp track

Uponor stapler and clamp track - System components and accessories ·································· 22

Uponor pipe positioning panel

Uponor pipe positioning panel - System components and accessories ··································· 27

Uponor steel mesh Classic

Uponor Classic - System components and accessories ···························································· 32

Uponor Plaster Ceiling Cooling

Uponor Plaster Wall/Ceiling H/C - System components and accessories ······························· 35

Uponor heat emission plate ······························································································· 38

Uponor Radiant Heating/Cooling > List of content

List of content

Abbreviations ······················································································································ 4

EEI-Int-RHC-01.12 3

Uponor underfloor heating accessories

Uponor underfloor heating accessories ·················································································· 39

Uponor underfloor heating manifolds

Uponor modular plastic manifolds ·························································································· 42

Uponor accessories for plastic manifolds ················································································ 43

Uponor stainless steel manifolds ···························································································· 45

Uponor manifold accessories ·································································································· 46

Uponor pipe bend support ····································································································· 48

Uponor manifold cabinets ······································································································ 48

A/F [mm] across flats

A [m²] square measure

c/c [mm] centre - centre distance

c/c1 [mm] centre - centre distance 1

colour [-] colour

Con. [l/m²] consumption

d [mm] diameter

d1 [mm] diameter 1

d2 [mm] diameter 2

d3 [mm] diameter 3

di [mm] diameter inside

DN [mm] diameter nominal

DT [d] drying time in days

EP/a [W] effective power per actuator

FT ["] female thread

FT m [-] female thread (metric)

G [kN/m²] load bearing capacity

h [mm] height

h1 [mm] height 1

h2 [mm] height 2

l [mm] length

l [m] length in meter

l1 [mm] length 1

MT ["] male thread

outlets [-] Number of outlets

OV [V] operating voltage

p [bar] pressure

P [W] effective power

Q [kW] nominal power

r [mm] radius

R-value [m²K/W] thermal resistance

s [mm] strength / wall thickness

sd [mm] side distance

stroke [mm] stroke

Type [-] Type

V [l/m] volume

w [mm] width

w [m] width in meter

w1 [mm] width 1

w2 [mm] width 2

z [mm] z-value

Δ Lw [dB] impact noise improvement

Uponor Radiant Heating/Cooling > Abbreviations

Abbreviations

EEI-Int-RHC-01.124

Shortcut unit Description

Uponor controls

Uponor Radio control ············································································································· 50

Uponor outdoor sensor ·········································································································· 54

Uponor wired control ············································································································· 55

Uponor control accessories 24 V ···························································································· 59

Uponor wired control 230 V ··································································································· 60

Uponor control accessories 230 V ·························································································· 61

Uponor climate controller ······································································································· 63

Uponor control stations ·········································································································· 67

Uponor industrial underfloor heating

Uponor industrial floor heating PE-Xa pipes ·········································································· 71

Uponor PE-Xa Q&E fittings ···································································································· 72

Uponor industrial floor heating fixation and accessories ························································ 73

Uponor industrial floor heating manifold and accessories ······················································ 75

Uponor snow and ice melting

Uponor snow and ice melting pipes························································································ 77

Uponor snow and ice melting manifold and accessories ························································· 78

Uponor sport floor heating

Uponor sport floor PE-Xa pipes ······························································································ 83

Uponor sport floor PE-Xa Q&E fittings ·················································································· 84

Uponor sport floor fixation and accessories ··········································································· 85

Uponor comfort panel

Uponor comfort panel ············································································································ 88

Uponor comfort panel - accessories ······················································································· 90

Uponor gypsum panel

Uponor gypsum panel ············································································································ 96

Uponor gypsum panel - accessories ······················································································· 97

Uponor tools

Uponor tools ·························································································································· 99

Uponor Radiant Heating/Cooling > List of content

List of content

EEI-Int-RHC-01.12 5

International sales and delivery terms ············································································· 105

Item search register ············································································································ 107

How to contact us ··············································································································· 111

6 EEI-Int-RHC-01.12

Radiant heating and cooling systems - for all areas of application the right system

Radiant heating and

cooling systems

Accessory systems

Floor – Renovation

Floor – new build, SFH, MFH, public

buildings

Wall/Ceiling - new build and

renovation

Minitec

Minimum height, maxi-

mum comfort

Fittings

For each pipe a save

connection

Siccus

The lightweight for

renovation

UFH accessories

To have the right

accessories is what

matters

Tecto

For fast and accurate

laying

Manifolds

Balanced distribution of

heat into the last corner

Self attaching system

Micro interlocking for

maximum holding force

Cabinets

For surface and fl ush

installation

Special Applications

Industrial UFH

Heating/Cooling of

productions halls,

warehouses or logistic

centers

Snow & ice melting

Keeping areas snow &

ice free

Sports fl oor heating

Sports fl oor heating for

surface elastic fl oors

Comfort panel

Ceiling cooling for

suspended ceilings

x

x

x

x

x x

x

x

x

x

x

x

x

x

7EEI-Int-RHC-01.12

Stapler and clamp track

Versatile through

fl exible pipe laying

Pipe positioning panel

14 – 16


laying

Classic

Proven for years, precise

laying

Controls

Wired or wireless

controlled, sensitive and

comfortable

20,5

Control stations

Energy effi cient supply

temperature control

Tools

which makes the work

easier

Plaster Wall/Ceiling

Multifunctional for wall

and ceiling

Ceiling cooling

systems

Gypsum panel

Ceiling cooling for

gypsum board ceilings

Contec

The storable concrete

core activation

Contec ON

The highly effi cient

surface close building

part activation

Stapler and clamp track

Versatile through

fl exible pipe laying

Pipe positioning panel

14 – 16


laying

Classic

Proven for years, precise

laying

Controls

Wired or wireless

controlled, sensitive and

comfortable

20,5

Control stations

Energy effi cient supply

temperature control

Tools

which makes the work

easier

Plaster Wall/Ceiling

Multifunctional for wall

and ceiling

Ceiling cooling

systems

Gypsum panel

Ceiling cooling for

gypsum board ceilings

Contec

The storable concrete

core activation

Contec ON

The highly effi cient

surface close building

part activation

x

x

x

x

x

x

x

x x

x

x

x

Uponor Radiant Heating/Cooling > Uponor Renovationsystem Minitec

EEI-Int-RHC-01.128

Fast installation, short heat-up

time: the Uponor renovation-

system Minitec off ers you a

range of advantages. The

Uponor minitec foil element for

the laying of the PE-Xa pipes

measures 9.9 x 1.1 mm and

can be installed on any existing

screed, timber of tiled fl oor. Thanks to this small element height of

around one centimetre, the system is particularly suitable for inte-

gration into existing buildings.

Your advantages Ideal for retrofi tting in existing buildings during renovations

Suitable for direct installation on screed or tiled fl oors

Elements height only 12 milimeter

Low-cost installation of foil elements and pipe

Foil elements can be walked over immediately aft er installa-

tion

Short heat-up times

Low heating water temperatures

Can be connected directly to existing radiant heating sys-

tems

System components

Uponor high performance panel

Room controls

Uponor radio controlUponor wired control 24 V230 V components

Control stations

Uponor control stations - overview

System pipe/fi ttings

Uponor PE-Xapipe 9,9 x 1,1

Additional components

Uponor Minitecedging strip

Manifold/Cabinets

Uponor PE-Xa Q&E coupling

Uponor Minitecjoint profi le

Uponor Minitecclamp track 9.9

Uponor PE-Xa conversion nipple

Uponor renovationsystem Minitec

Uponor Minitecjoint protection

Uponor pipe connection PE-Xa 9.9

Uponor PE-Xa Pipe 9.9x1.1 expander

20,5

Uponor cabinet

Uponor manifold connection valve set G 1/Rp 1

Uponor manifold

e.g. can be used with Knauf Levelling Screed 425


Uponor Minitec - System components and accessories

Uponor Minitec high-performance panelDesigned as sturdy pipe fixing panel of minimum height, with integrated

pipe laying channels for correct pipe laying distances; designed for Uponor

Minitec PE-Xa pipes 9.9 x 1.1 mm; allowing for straight and diagonal

pipe laying; with undercut, deep pipe fixing studs; overlap on both sides

with triangular studs; perforated panel for installation between levelling

compound and substructure; with self-adhesive back for proper fixture to

screed and tiled floors

Material: Polystyrene

DIN 4102 building material class: B2

Pipe spacing: Vz 5, 10, 15

Colour: traffic black (near RAL 9017)

Item no. h [mm] l [mm] w [mm] A [m²] Description unit

1005261 12 1120 720 0.77Uponor Minitec high performance panelwith,self-adhesive layer for pipes 9.9mm 15.4 m²

Uponor PE-Xa pipesPE-Xa pipe with an oxygen diffusion barrier manufactured from peroxide

cross-linked polyethylene (PE-Xa) using the Engel method complying

with e.g. prENISO 15875 “Plastics piping systems for hot and cold water

installations - Cross-linked polyethylene” with an oxygen diffusion barrier

of EVOH (ethyl vinyl alcohol). Uponor pipes fulfil the requirements for

oxygen diffusion resistance as per DIN 4726. Malfunction temperature

95°C. Design pressure 8,8 bar (at 70°C).

Item no. d [mm] s [mm] l [m] V [l/m] Description unit

1033024 9.9 1.1 120 0.047Uponor eval PE-Xa pipe 9.9x1.1

120 m


480 m


240 m

Uponor PE-Xa Q&E coupling 9.9For Uponor PE-Xa pipe 9.9 x 1.1 mm, consisting of:

- 1 coupling

- 2 PEX Q&E rings for secure connection

Material: Coupling made in brass; PEX Q&E rings made in high-pressure

cross-linked polyethylene

Item no. d [mm] s [mm] l [mm] z [mm] Description unit

1005264 9.9 1.1 34 4Uponor PE-Xa Q&E coupling 9.9-9.9with two PEX rings 10 pcs

Uponor PE-X ring for PE-Xa pipesFor Uponor Minitec PE-Xa pipe 9.9 x 1.1 mm; to secure fixing to Minitec

fittings

Material: High-pressure cross-linked polyethylene (PE-Xa)

Item no. d [mm] Description unit

1005263 9.9Uponor PE-X ring for PE-Xa pipes9.9 x 1.1 10 pcs

Uponor PE-Xa conversion nippleFor Uponor PE-Xa pipes 9.9 x 1.1 mm, made of brass.

Item no. d [mm] MT ["] l [mm] z [mm] A/F [mm] Description unit

1005265 9.9 R 1/2 39 14 22Uponor PE-Xa conversion nipple9.9 - 1/2 with one PEX ring 10 pcs

EEI-Int-RHC-01.12 9


Uponor Minitec - System components and accessories

Uponor edging strip, 80x8Edging strip for high performance panel conforming to DIN 18560, made

of polyethylene with self-adhesive backing, self-adhesive strip on outer

face provides tight seal between edging strip and insulation;

Length of roll: 20 m

Item no. h [mm] l1 [mm] s [mm] l [m] Description unit

1005267 80 70 8 20Uponor Minitec edging strip, 80 x 8in length of 20 m 200 m

Uponor joint profile 40x10Self-adhesive clamp-on profile element for high performance panel made

of hard PVC with polyethylene foam expansion strip, for the reliable

separation of screed sections (e.g. in doorways), and to absorb expansion

of screed. For expansion joints as per DIN 18560-2.

Height: 40 mm

Material thickness: 10 mm

Length: 1,8 m

Item no. l [mm] s [mm] w [mm] h [mm] Description unit

1005268 1800 10 50 40Uponor Minitec joint profile40 x 10, length 1.8 m 18 m

l

b

s

Uponor joint protection 9.9mmMade of PE-LD, with slit opening, for protection of pipes up to 9.9 mm in

areas of expansion joints.

Length: 300 mm

Item no. l [mm] s [mm] w [mm] Description unit

1005269 300 2 35Uponor joint protection tube forPE-Xa pipes 9.9 x 1.1, length 300 mm 30 pcs

ra

d

h

l b

Uponor clamp track 9.9Self-adhesive U-profile strip made of recycled material, with integrated

pipe holder for 9.9 x 1.1 mm Uponor PE-Xa pipes.

Length of track: 2.5 m

Width of track: 24 mm

Space between pipe holders: 20 mm c/c

Installation height with pipe: 13 mm

Item no. l [mm] w [mm] h [mm] d [mm] c/c [mm] Description unit

1005274 2500 24 13 10 20Uponor clamp track 9.9 mm

25 m

EEI-Int-RHC-01.1210

Uponor Radiant Heating/Cooling > Uponor lightweight panel Siccus

EEI-Int-RHC-01.12 11

e.g. can be used with Knauf Brio Pre-fab Floor Screed Elements

Uponor lightweight panel Siccus

The Uponor lightweight panel

Siccus has been specially

designed as a universal solu-

tion for the restoration of old

buildings where a low con-

struction height and low

weight are very important.

The panels are installed on the

fl oor below the load distribution layer consisting of dry screed

panels or heating screeds.

Your advantages Minimum fl oor construction height from 50 mm

Short installation time, immediately accessible if installed

with dry screed

Low static weight from 25 kg/m² Last with dry screed

panels

Specially devised installation panel for universal use

System components

Uponor Siccus lightweight panel

Uponor Siccusheat emission plate

Uponor PE Foil 0.2mmPE-type 200

Room controls

Uponor radio controlUponor wired control 24 V230 V components

Control stations


20,5


Uponor edging strip

Manifold/Cabinets

Uponor manifold

Uponor joint profi le 100x10

Uponor compression adapter PE-Xa and MLCP

Uponor joint protection 20mm

Uponor marking set

Uponor screed additive

Uponor PE foil 0.2 mm

Uponor cabinet

Uponor manifold connection valve set G 1/Rp 1

Systempipe/-Fittings

PE-Xa pipe 14x2

Uponor MLCP 14 pipe

MLC press coupling14x2



Uponor Siccus - System components and accessories

Uponor Siccus lightweight panel

Pipe fixing panel for butt joint installation; with pipe channels for the

installation of heat emission plates or Uponor PE-Xa pipes

14 x 2 mm and Uponor MLCP pipes 14 mm

Material: Expanded polystyrene rigid foam according to DIN EN 13163


Application type according to DIN 4108-10: DEO

Compressive strength: = 150 kPa

Technical data

Plate size: 1197 x 1050 mm

Plate thickness: 25 mm

Thermal resistance: 0.622 m2 K/W

Payload: 7.5 kN/m2

Pipe spacing: 15 cm, 22.5 cm or 30 cm

Item no. l [mm] w [mm] h [mm] A [m²] Description unit

1005485 1197 1050 25 1.25Uponor Siccus lightweight panel

12.5 m²

l

b

Uponor heat emission plate 14 mm

For installation on Uponor lightweight panel; ensures uniform heat

distribution and proper fixture of Uponor PE-Xa pipes 14 x 2 mm and

Uponor MLCP RED radiant heating pipes 14 x 1.6 mm; with double

perforations for easy cutting to size.

Material: Aluminium

Plate size: 120 x 1180 mm

Plate thickness: 0.45 mm

Material requirement:

Pipe spacing Va 15 = 5.6 plates/m2

Pipe spacing Va 22.5 = 3.7 plates/m2

Pipe spacing Va 30 = 2.8 plates/m2

Item no. l [mm] w [mm] Description unit

1005486 1180 120Uponor Siccus heat emission plate 14 mmfor lightweight panel, 1180 x 120 mm 48 pcs

Uponor PE foil 0.2mm

For installation on Uponor insulation or on standardised insulating material

approved for the intended purpose for areas without stud foil. Prevents

screed penetrating the underlying insulation.

Dimensions: 4 m x 2.5 m

Thickness: 0.2 mm

Item no. l [m] w [m] s [mm] Description unit

1005049 60 1.25 ~0.2Uponor PE foil 0.2 mm thickness60 x 1.25 m 75 m²

Uponor PE-Xa pipe

as coil, for use as radiant heating pipe, connected by Q&E, press or clamp

fittings.

Material: Uponor PE-Xa pipe made in high-pressure cross-linked

polyethylene (Engel method), conforming to DIN 16892 and DIN ISO

15875, oxygen-tight according to DIN 4726

Colour: white with black and red longitudinal stripes

Uponor PE-Xa pipe

Max. operating temperature: 90°C

Max. operating pressure: 6 bar at 70 °C

Application class: 4 / 6 bar

Item no. d [mm] s [mm] l [m] Description unit

1048290 14 2 240Uponor eval PE-Xa Q&E pipe 14x2.0240 m coil 240 m


EEI-Int-RHC-01.1212


Uponor Siccus - System components and accessories

Uponor MLCP white in coils

Diffusion-tight multi-layer composite pipe (PE-RT - adhesive -

longitudinally welded aluminium - adhesive - PE-RT) for distribution

conduits, rising mains and connection lines for plumbing, radiator

connection and fancoil connection. Fire classification E according to DIN

EN 13501-1. Pipe end caps as hygienic seal according EN 806.

Resistance of temperature:

Tap water: The maximum permanent operating temperature exists between

0°C and 70°C at a maximum permanent operating pressure of 10 bars. The

short-term malfunction temperature is 95°C of a maximum of 100 hours in

the operating lifetime.

Heating: The maximum permanent operating temperature is 80°C at

a maximum permanent operating pressure of 10 bars. The short-term

malfunction temperature is 95°C of a maximum of 150 hours in the

operating time per year.


1013366 14 2.0 200Uponor MLCP 14x2white in coils 200m 200 m

Uponor Q&E Coupling

for Uponor PEXa pipe consisting of:

1 Coupling / Brass

2 PEX-Rings for secure connection / cross linked Polyethylene


1058659 14Uponor Q&E Coupling 14with two eval Rings, nature 10 pcs

Uponor Q&E Ring natural

Made of PE-X. Uponor rings natural intended for Uponor Q&E fittings.

Item no. d [mm] colour [-] Description unit

1058428 14 naturalUponor Q&E ring eval without stop edgenature 14 20 pcs

Uponor press coupling MLC up to 32

Made of tin-plated brass, with fixed press sleeve, stop ring, pressed

identification, colour code and test safety. Press without bevel.


1015154 14Uponor press coupling MLC 14-14

10 pcs


Uponor Radiant Heating/Cooling > Uponor pipe positioning panel Tecto

EEI-Int-RHC-01.1214

Uponor pipe positioning panel Tecto

The Uponor Tecto pipe posi-

tioning panel has been spe-

cially developed for the instal-

lation of underfl oor heating/

cooling systems in residential

and non-residential buildings.

The panels are installed in the

fl oor below the cement or

anhydrite screed load distribution layer. Uponor Tecto panels are

available in two diff erent thicknesses (ND 30-2 and ND 11),

catering for various fl oor constructions and load-bearing require-

ments.

Your advantages

Cost-effi cient one-man installation

Easy laying thanks to large panels (1450 x 850 mm)

Compensation elements for doors, movements joints and

wall joints available

Double-sided strips for easy connection of element cut-off s

with minimum waste

Diagonal pipe fi xture for installation at 45° angles

Suitable pipe sizes from 14 to 17 mm

Ensures standardised pipe spacing due to forced pipe paths

Proper covering of the insulating layer thanks to integrated

sturdy deep-drawn foil

Suitable for a wide range of applications thanks to high

strength properties (ND 30-2: 500 kg/m²; ND 11: 3.0 t/

m²)

System components

Uponor Tecto pipe

positioning panel

ND 11 + 30-2

Uponor Tecto double sided

strips

Uponor Tecto pipe fi xation

element

Uponor Tecto PE foil for

compensation

element

Uponor Tecto PE foil for

compensation

element in 45°

14 — 1714 — 17

Room controls

Uponor radio control

Uponor wired control 24 V

230 V components

Control stations


20,5


Uponor edging strip

Manifold/Cabinets

Uponor manifold

Uponor joint profi le

100x10

Uponor compression adapter

PE-Xa and MLCP

Uponor joint protection

20mm

Uponor marking set

Uponor screed

additive


Uponor cabinet

Uponor manifold connection

valve set G 1/Rp 1


PE-Xa pipe

14 + 17


MLC press coupling

14x2 + 16x2

MLCP pipe

14 + 16


Uponor Tecto - System components and accessories

Uponor pipe positioning panel with insulation

ND 30-2

Pipe fixing panel ND 30-2 for pipes 14 - 17 mm with heat and sound

insulation. Made of expanded polystyrene insulation covered by a black

polystyrene foil acc. to DIN EN 13163. DIN EN 13501-1 fire classification:

class E. Building-material class B2 conforming to DIN 4102. Approved for

moving loads of up to 5.0 kN/m².

Thermal resistance: 0.75 m²K/W.

For pipe spacing in cm: 10, 15, 20, 25, 30.

Dimensions: 1.45 m x 0,85 m

Panel height: 52 mm

Item no. h1 [mm] h2 [mm] l [mm] w [mm] A [m²] Δ Lw [dB] Description unit

1005478 52/50 30-2 1450 850 1.12 28Uponor Tecto pipe positioning panel incl.Insulation for dim. 14-17, thickness 30mm 8.96 m²

Uponor pipe positioning panel with insulation ND 11

Pipe fixing panel ND 11 for pipes 14 - 17 mm with heat insulation. Made

of expanded polystyrene insulation covered by a black polystyrene foil acc.

to DIN EN 13163. DIN EN 13501-1 fire classification: class E. Building-

material class B2 conforming to DIN 4102. Approved for moving loads of

up to 30 kN/m². Thermal resistance: 0.275 m²K/W. For pipe spacing in

cm: 10, 15, 20, 25, 30.

Dimensions: 1.45 m x 0,85 m

Panel height: 33 mm


1005477 33 11 1450 850 1.12 0Uponor Tecto pipe positioning panel incl.Insulation for dim. 14-17, thickness 11mm 15.68 m²

> PS-E <b

l h

Uponor compensation insulation element ND 30-2

as heat-/sound insulation for use with the compensation element covering

foil in door or wall area.

Material: Expanded polystyrene hard foam acc. to DIN EN 13163

Building class according to DIN 4102: B2


Approved for moving loads of up to 5.0 kN/m².

Item no. h [mm] l [mm] w [mm] Δ Lw [dB] A [m²] Description unit

1005480 30-2 1400 150 28 0.21Uponor Tecto compensationinsulation element - thickness 30-2mm 8.4 m

l h

b

> PS

Uponor compensation insulation element ND 11

as heat-/sound insulation for use with the compensation element covering

foil in door or wall area.

Material: Expanded polystyrene hard foam acc. to DIN EN 13163



Approved for moving loads of up to 30 kN/m².

Item no. h [mm] l [mm] w [mm] Δ Lw [dB] A [m²] Description unit

1005479 11 1400 150 0 0.21Uponor Tecto compensationinsulation element - thickness 11mm 22.4 m




> PS <

bb

1

l

l1

Uponor PE-foil for compensation element

For use with compensation-insulation ND 11 or ND 30-2 in door or wall

area, consists of:

- covering foil with cutter raster, single overlapping, pipe fixing foil for

secure connection of compensation elements on the Tecto elements

Material: PS-foil


Colour of leveling foil: black, approx. RAL 9017

Item no. l [mm] l1 [mm] w [mm] w1 [mm] A [m²] Description unit

1005481 1400 1450 200 150 0.21 Uponor Tecto PE-foil forcompensation insulation element 28 m

b

> PS <

Uponor pipe fixation element 45°

Consist of 2 pipe fixing naps connected with one pipe fixation element as

stripe with 3 fixations for diagonal installation of Uponor pipes on Uponor

Tecto pipe positioning panel. Each stripe is separable in 3 fixation elements.

Material: Black deep drawing PS foil. Building-material class B2 conforming

to DIN 4102.

Item no. w [mm] Description unit

1005482 75Uponor Tecto pipe fixation elementfor diagonal installation 10 pcs

Uponor PE-foil for compensation element in 45°

Covering foil in 45° version for use with compensation-insulation ND 11 or

ND 30-2 in door or wall area, consists of:

- covering foil with cutter raster, single overlapping, pipe fixing foil for

secure connection of compensation elements on the Tecto elements

Material: PS-foil


Colour of leveling foil: black, aprox. RAL 9017

Item no. l [mm] l1 [mm] w [mm] w1 [mm] A [m²] Description unit

1005483 1343 1414 225 150 0.2Uponor Tecto PE-foil forcompensation insulation element in 45° 26.8 m

> PS <

l

h

b

l1

Uponor double-sided strip

Foil strips with pipe fixing studs in two rows for the proper connection of

Tecto elements ND 11 or ND 30-2 (butt joints)

Material: Deep drawn PS foil


Colour of cover foil: traffic black (near RAL 9017)

Item no. l [mm] l1 [mm] w [mm] h [mm] Description unit

1005484 1350 1400 100 22Uponor Tecto double sided stripsto connect panels 33.75 m

EEI-Int-RHC-01.1216



Uponor PE-Xa pipe


fittings.





Uponor PE-Xa pipe







Uponor eval PE-Xa Q&E pipe in coils

Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using

the Engel method, complying with e.g. EN ISO 15875 ”Plastics piping

systems for hot and cold water installations - Cross-linked polyethylene”.

Includes an ethylene vinyl alcohol (EVOH) oxygen barrier layer, complying

with DIN 4726, to prevent corrosion of system components. This barrier

has been specially developed to work together with Uponor Q&E fitting

technology. Classification of service conditions (including typical field of

application): Application class 4 - Underfloor heating and low temperature

radiators, malfunction temperature 95 °C. Design pressure 6 bar.

Application class 5 - high temperature radiators, malfunction temperature

95 °C. Design pressure 6 bar.

Item no. d [mm] s [mm] l [m] p [bar] Description unit

1047610 16 2.0 120 6Uponor eval PE-Xa Q&E pipe16x2.0 mm in coils of 120 m 120 m



Uponor PE-Xa pipes

PE-Xa pipe with an oxygen diffusion barrier manufactured from peroxide








1034535 17 2.0 120 0.13Uponor pe PE-Xa Q&E pipe 17x2.0120 m coil 120 m


























Uponor Q&E Coupling


1 Coupling / Brass










1042389 16 naturalUponor Q&E Ring eval with stop edgenature 16 20 pcs







10 pcs


10 pcs

EEI-Int-RHC-01.1218

Uponor Radiant Heating/Cooling > Uponor self attaching system


Uponor self attaching system

With its self attaching system,

Uponor off ers installers an

innovating pipe laying system

for underfl oor heating pipes. At

the factory, hook fasting tape

is wound around the oxygen-

tight pipes conforming to

DIN 4726. The system insulat-

ing panel, which can also be used as a stapler panel, is completely

covered with the matching laminated loop foil. The pipe can be

reeled off and laid on the fl oor as usual and only needs to be

pressed at the correct position against the laminated insulating

panel. The hooks on the tape around the pipe catch the loops on

the foil and thus secure the pipe to the surface. Both the hook

take and the loop foil are designed to guarantee maximum fi xture.

Your advantages

Easy pipe laying without any special tools

For cost-effi cient one-man installation

Installed pipes can be repositioned at any time

System panels available in various thicknesses to suit indi-

vidual insulation needs

Roll-out insulation for fast installation

Ideal for fl exible pipe spacing in rooms of any shape

Thanks to the large number of fastening points, the pipe is

fi rmly placed against the surface along its entire length

System components

Uponor self attaching

insulation roll panel


Uponor PE-Xa

self attaching

pipe 16 x 1.8

Uponor MLCP

self attaching

pipe 16x2.0

Uponor self attaching

insulation fold panel

Uponor tape

Room controls



230 V components

Control stations


20,5


Uponor edging strip

Manifold/Cabinets

Uponor manifold


PE-Xa and MLCP


100x10


20mm

Uponor marking set

Uponor screed

additive


Uponor cabinet


valve set G 1/Rp 1

MLC press coupling

16x2



Uponor self attaching system - System components and accessories

Uponor self attaching insulation roll panel

Pipe fixing panel in roll form, for thermal and impact noise insulation

according to DIN EN 13163 and DIN 4108-10; made from EPS rigid foam

with laminated textile adhesive foil for overlap installation; foil extending

on one side to cover insulating layer according to DIN 18560.

Foil raster: 100 x 100 mm

DIN EN 13501-1 fire classification: class E

Item no. Description unit

1007226Uponor self attaching insulation roll panel 25-2EPS 045 DES SM 12 m²

1007228Uponor self attaching insulation roll panel 30-3EPS 045 DES SM 12 m²

Uponor self attaching insulation fold panel

Pipe fixing panel , for thermal and impact noise insulation according to DIN

EN 13163 and DIN 4108-10; made from EPS rigid foam with laminated

textile adhesive foil for overlap installation; foil extending on one side to

cover insulating layer according to DIN 18560.




1007232Uponor self attaching insulation fold panel 30-3

10 m²

Uponor self attaching insulation fold panel 15mm

Pipe fixing panel , for thermal insulation according to DIN EN 13163 and

DIN 4108-10; made from EPS rigid foam with laminated textile adhesive

foil for overlap installation; foil extending on one side to cover insulating

layer according to DIN 18560.




1007234Uponor self attaching insulation fold panel 15mmEPS 040 DEO 20 m²

Uponor tape

Tape for the sealed joining of Uponor insulation, applied with hand-held

roll device. Roll length 66m.

Item no. l [m] Description unit

1000012 66Uponor tape 50 mm

1 pcs

EEI-Int-RHC-01.1220

h [mm] l [mm] w [mm] G [kN/m²] R-value [m²K/W] Δ Lw [dB]

25-2 12000 1000 4 0.56 28

30-3 12000 1000 4 0.67 29


30-3 2000 1000 4 0.67 29


15 2000 1000 30 0.38 -


Uponor self attaching system - System components and accessories

Uponor PE-Xa self attaching pipes

PE-Xa pipe with an oxygen diffusion barrier of EVOH manufactured from

peroxide cross-linked polyethylene (PE-Xa) using the Engel method

complying with DIN 16892 and DIN ISO 15875, oxygen tight according to

DIN 4726.


Application class 4 / 6 bar.


1047624 16 1.8 240Uponor self attaching eval PE-Xa pipe 16x1.8240 m coil 240 m

1047625 16 1.8 640Uponor self attaching eval PE-Xa pipe 16x1.8640 m coil 640 m

Uponor MLCP UFH/C self attaching pipes

Diffusion-tight multi layer composite pipe (PE-RT - adhesive agent

- longitudinally welded aluminium - adhesive agent - PE-RT) for

radiant heating / cooling applications. Normally inflammable, materials

classification B2 according to DIN 4102. Max. continuous operation

pressure: 4 bar at continuous operating temperature 60°C.


1048249 16 2 200Uponor MLCP self attaching red heating UFH/C 16x2.0200m pipe with oxygen barrier 200 m

1048395 16 2 500Uponor MLCP self attaching red heating UFH/C 16x2.0500m pipe with oxygen barrier 500 m

Uponor Q&E Coupling


1 Coupling / Brass













10 pcs


Uponor Radiant Heating/Cooling > Uponor stapler and clamp track

EEI-Int-RHC-01.1222

Uponor stapler and clamp track system

All components of the Uponor

stapler and clamp track system

are designed to perfectly match

each other.

The panels with thermal and

impact noise insulation are

equipped with a tear-proof sur-

face and a printed installation

grid. They allow for easy installation of the system pipe. These and

all other components are designed to ensure optimum safety and

reliable operation of the system.

Your advantages

Flexible pipe laying

Available as composite panels or rolls with a range of diff er-

ent thermal and impact noise insulation layers

Suitable for all types of screeds

Large pipe coils reel for minimum cut-off s and twist-fee

installation

Fast to install thanks to the integrated insulation layer

cover

Universal staple nail for pipe thickness of 14 – 20 mm

Easy installation with ergonomically designed Uponor

system stapler

System components

Uponor insulation

roll


Uponor PE-Xa

pipe

Uponor MLCP

pipe

Uponor pipe staple nail

Uponor tape

Uponor clamp

track

Uponor fastening nail

Uponor stapler

Room controls



230 V components

Control stations


20,5


Uponor edging strip

Manifold/Cabinets

Uponor manifold


PE-Xa and MLCP


100x10


20mm

Uponor marking set

Uponor screed

additive


Uponor cabinet


valve set G 1/Rp 1


MLC press coupling

14x2 + 16x2

+ 20x2,25


Uponor stapler and clamp track - System components and accessories

Uponor insulation roll panel with texture foil

Ready-to-lay heat/sound insulation roll, consisting of: tear-resistant

texture foil laminated onto 25-2 EPS 045 DES sm as per DIN EN 13163

and DIN V 4108-10 (WLG 045). DIN EN 13501-1 fire classification: class

E. Standard flammability, building-material class B2, conforming to DIN

4102. Suitable for use in area between floors, where rooms on either side

are heated to same level. With printed-on grid pattern for ease of cutting

and alignment. Approved for moving loads of up to 4.0 kN/m². Thermal

resistance: 0,56 (m² x K/W).


1000002Uponor insulation roll panel with texture foiltyp 30-2 12 m²

1000003Uponor insulation roll panel with texture foiltyp 30-3 12 m²

Uponor PE pattern foil 0.25mm

0,25 mm-thick foil with printed on pattern 100 x 100 mm for laying over

existing heat/sound insulation and fixation of clamp tracks. Prevents

screed from flowing down into the insulating layer.



1000015 100 1.03 0.25Uponor PE pattern foil 0.25mm thicknessfor clamp track fixation 103 m²

Uponor pipe fixing foil

Multi-layer reflection and impact foil, designed to improve thermal

insulation and distribution; also serving as

damping course. With printed raster.

Load capacity: 15 kN/m2

Roll width: 1 m

Roll length: 60 m

Foil height: 4 mm

Item no. l [m] w [m] s [mm] G [kN/m²] Description unit

1000017 60 1 4 15Uponor pipe fixing foil 4 mm

60 m²

Uponor Pipe Clip standard

Pipe staple "Standard" in blue, loaded into magazine for securing heating-

system pipes onto insulation. For Uponor pipes 14 - 20 mm.


1002296 14-20Uponor Pipe Clip standardØ: 14-20 mm, H = 40 mm 1000 pcs

Uponor Pipe Clip long

Pipe staple "Long" in grey, loaded into magazine for securing heating-

system pipes onto insulation. For Uponor pipes 14 - 20 mm.


1002297 14-20Uponor Pipe Clip longØ: 14-20 mm, H = 55 mm 300 pcs



30-2 12000 1000 5 0.75 28

30-3 12000 1000 4 0.67 29



ra

d

h

l b

Uponor clamp track 14

Self-adhesive U-profile strip made of recycled material, with integrated

pipe holder for 14 x 2 mm Uponor pipes. Rated break points are provided

every 100 mm for easy separation.






1005498 2500 38 17 14 50Uponor clamp track 14 mm

25 m

ra

d

h

l b

Uponor clamp track 16


pipe holder for 16 x 2 mm Uponor pipes. Rated break points are provided

every 100 mm for easy separation.

Length of track: 2 m





1013127 2000 40 25 16 25Uponor clamp track 16 mm

100 m

Uponor clamp track 14-20


pipe holder for Uponor pipes 14-20 mm.

Length of track: 1 m




Item no. l [mm] w [mm] h [mm] c/c [mm] Description unit

1000018 1000 50 27 50Uponor clamp track 14 - 20 mm

100 m


The purpose of the fastening nail is to fix the Uponor clamp track and

the fixing-foil or the pipe positioning panel to the underlaying layer of

insulation. Can also be used for additional manual fastening of Uponor

MLC and PE-Xa pipes.


1000019Uponor fastening nail

500 pcs

EEI-Int-RHC-01.1224



Uponor PE-Xa pipe


fittings.





Uponor PE-Xa pipe























Uponor PE-Xa pipes






































1013392 20 2.25 200Uponor MLCP 20x2,25white in coils 200m 200 m

Uponor Q&E Coupling


1 Coupling / Brass



















10 pcs


10 pcs


10 pcs

EEI-Int-RHC-01.1226

Uponor Radiant Heating/Cooling > Uponor pipe positioning panel


Uponor pipe positioning panel 14-16

The Uponor installation panel

has been specially developed

for the installation of under-

fl oor heating/cooling systems

in residential and non-residen-

tial buildings. The panels are

installed in the fl oor below the

cement or anhydrite screed

load distribution layer. Uponor installation panels are available in

two diff erent thicknesses with insulation (ND30-2) and without

insulation (ND11), catering for various fl oor constructions and

load-bearing requirements.

Your advantages

Cost-effi cient one-man installation

Easy laying thanks to large panels (1447 x 900 mm)

Compensation elements for doors, movements joints and

wall joints available

Suitable pipe sizes from 14 to 16 mm

Ensures standardised pipe spacing due to forced pipe paths

Proper covering of the insulating layer thanks to integrated

sturdy deep-drawn foil

Suitable for a wide range of applications thanks to high

strength properties (ND 30-2: 5 kN/m²; ND 11: 30 kN/

m²)

System components Systempipe/-Fittings

Uponor PE-Xa

pipe

Room controls



230 V components

Control stations


20,5


Uponor edging strip

Manifold/Cabinets

Uponor manifold


PE-Xa and MLCP


100x10


20mm

Uponor marking set

Uponor screed

additive


Uponor cabinet


valve set G 1/Rp 1

Uponor Q&E coupling

MLCP pipe

14 + 16

MLC press coupling

14x2 + 16x2

Uponor installation panel

14-16 ND11

Uponor installation panel

14-16 ND

Uponor pipe positioning

panel


Uponor pipe positioning panel - System components and accessories

Uponor installation foil 14-16

Foil element without foamed back panel. Vacuum-formed PS deep-drawn

foil made of impact-proof polystyrene with integrated pipe fixing studs for

proper pipe spacing and exact installation of the Uponor system pipes at

the required height. The deep-drawn foil overlaps on two sides; when laid

in a staggered pattern, the foil layer is thus continuous. For installation on

top of insulation layer.

Right-angled: RA 5.5 – 11 – 16,5 – 22 – 27.5 – 33 cm

Diagonal: RA 7.5 – 15 – 22.5 – 30 cm

Dimensions of element foil: 1447 x 900 m

Item no. h1 [mm] l [mm] w [mm] A [m²] Δ Lw [dB] Description unit

1016703 18 1447 900 1.2 0Uponor pipe positioning panel14 - 16 mm 10 m²

Uponor installation panel 14-16 / 30-2

For cement and self-levelling cement screeds; allows for right-angled or

diagonal pipe installation at 6 plus 4 different pipe distances; for optimised

heating pipe installation based on actual room geometry with minimum

cut-offs thanks to sophisticated system technology; allows for fast and

easy installation of the hard/soft PS rigid foam panels with overlapping

foil edges. Meets the requirements for standard impact noise insulation

(DIN 4109), thermal insulation (DIN EN1264), DIN EN 13501-1 fire

classification: class E, fire safety (DIN 4102) B2 and heat output (DIN EN

1264), irrespective of the pipe spacing; the height and distance of the

sturdy pipe holders (DIN EN 1264) are fixed to prevent shifting of the

pipes; the overlapping application foil acts as a damp-proofing course and

eliminates sound bridges (DIN 18560); protects the environment thanks to

use of environmentally friendly PS. Properties subject to continuous RAL

quality monitoring.

Pipe spacing with right-angle installation: RA 5.5 - 11 - 16.5 - 22 - 27.5

- 33 cm

Pipe spacing with diagonal installation: RA 7.5 - 15 - 22.5 - 30 cm

Type: 30-2 mm, for universal use in

residential and commercial buildings up to 5 kN/m2

EPS 040 DES sg

Dimensions: 1447 x 900 mm


Impact noise insulation: 28 dB

Application range: up to 5 kN/m2

Thermal resistance: R� = 0.75 m2K/W


1016699 50/48 30-2 1447 900 1.2 28Uponor nap panel 14-16mm incl.Insulation, thickness 30mm 10 m²

EEI-Int-RHC-01.1228



Uponor installation panel 14-16 / 11

For cement and self-levelling cement screeds; allows for right-angled or

diagonal pipe installation at 6 plus 4 different pipe distances; for optimised

heating pipe installation based on actual room geometry with minimum

cut-offs thanks to sophisticated system technology; allows for fast and

easy installation of the hard/soft PS rigid foam panels with overlapping

foil edges. Meets the requirements for standard impact noise insulation

(DIN 4109), thermal insulation (DIN EN1264), DIN EN 13501-1 fire

classification: class E, fire safety (DIN 4102) B2 and heat output (DIN EN

1264), irrespective of the pipe spacing; the height and distance of the

sturdy pipe holders (DIN EN 1264) are fixed to prevent shifting of the

pipes; the overlapping application foil acts as a damp-proofing course and

eliminates sound bridges (DIN 18560); protects the environment thanks to

use of environmentally friendly PS. Properties subject to continuous RAL

quality monitoring.

Pipe spacing with right-angle installation: RA 5.5 - 11 - 16.5 - 22 - 27.5

- 33 cm

Pipe spacing with diagonal installation: RA 7.5 - 15 - 22.5 - 30 cm

Type: 11 mm, for universal use in

residential and commercial buildings up to 30 kN/m2

EPS 035 DE0 dm (100kPa)





1016700 29 11 1447 900 1.2 0Uponor nap panel 14-16mm incl.Insulation, thickness 11mm 10 m²

Uponor installation panel 14-16 manifold/door kit

30-2

For universal use, facilitating pipe laying near manifolds thanks to special

manifold element. Stud overlap allows for easy integration into element

structure. Door element designed for straight door openings; can be cut

into customised door element strips. Per panel, you can cut 10 strips

catering for 5 doors. Universal use of element thanks to easy adjustment

to complex

room geometries including angled door openings.

Type: 30-2 VT

EPS 040 DES sg



consisting of:

2.5 m2 manifold element foil (2 panels)

2.5 m2 door element foil (2 panels)

5 m2 30-2 mm thermal and impact noise insulation (4 panels)


1016701 50/48 30-2 1420 900 1.2 28Uponor manifold-/door set for nap panel 14-16mmthickness 30mm 5 m²




For universal use, facilitating pipe laying near manifolds thanks to special

manifold element. Stud overlap allows for easy integration into element

structure. Door element designed for straight door openings; can be cut

into customised door element strips. Per panel, you can cut 10 strips

catering for 5 doors. Universal use of element thanks to easy adjustment

to complex

room geometries including angled door openings.

Type: 11 VT

EPS 035 DEO dm (100 kPa)



consisting of:

2.5 m2 manifold element foil (2 panels)

2.5 m2 door element foil (2 panels)

5 m2 11mm thermal insulation (4 panels)


1016702 29 11 1420 900 1.2 0Uponor manifold-/door set for nap panel 14-16mmthickness 11mm 5 m²

Uponor PE-Xa pipe


fittings.





Uponor PE-Xa pipe























EEI-Int-RHC-01.1230

Uponor installation panel 14-16 manifold/door kit

11























Uponor Q&E Coupling


1 Coupling / Brass















10 pcs


10 pcs


Uponor Radiant Heating/Cooling > Uponor steel mesh Classic

EEI-Int-RHC-01.1232

Uponor steel mesh system Classic

The Uponor steel mesh system

Classic is the ideal solution for

underfl oor heating/cooling

systems on virtually all fl oors

in new residential and com-

mercial buildings.

Available in three raster sizes,

Uponor Classic allows you to

optimise the pipe spacing to meet the actual heating needs. As

the heating layer is separated from the insulation layer(s), the

system, in combination with high-payload insulation, is also ide-

ally suited for areas with high traffi c and payload, such as garage

showrooms, production halls, retail outlets, etc.

Your advantages

Exact pipe laying: the steel mesh and pipe holders ensure

standardized pipe distances – along both horizontal and

vertical.

Sturdy clamping: the pipe clips secure the pipe fi rmly on

the carrier element.

No damage to insulation covering

Free hand when choosing your insulating material.

Cost-effi cient one-man installation: fl exible, fast and easy

to install, saving you time and money.

System components

Uponor steel mesh


Uponor PE-Xa pipe

17x2,0 + 20x2,0

Uponor Q&E couplingUponor PE Foil 0.2mm

PE-type 200

Uponor calbe tie

Uponor tying wire

Uponor pipe holder clip

Room controls



230 V components

Control stations


20,5


Uponor edging strip

Manifold/Cabinets

Uponor manifold


100x10


PE-Xa and MLCP


20mm

Uponor marking set

Uponor screed

additive


Uponor cabinet


valve set G 1/Rp 1

e.g. can be used with Knauf Floor Screed FE 80


Uponor Classic - System components and accessories

Uponor Classic steel mesh

For stable attachment of pipe fixations and standard installation of

underfloor heating pipes. Dim. 2100mm x 1200mm.

Material: corrosion protected steel.

Item no. l [mm] w [mm] d [mm] r [mm] A [m²] Description unit

1005084 2100 1200 3 100 2.5Uponor Classic element 10cmgrid 10 and 20, corrosion protected 25 m²

1005087 2100 1200 3 150 2.5Uponor Classic element 15cmgrid 15 and 30, corrosion protected 25 m²






Thickness: 0.2 mm



Uponor pipe fixing foil

Multi-layer reflection and impact foil, designed to improve thermal

insulation and distribution; also serving as

damping course. With printed raster.

Load capacity: 15 kN/m2

Roll width: 1 m

Roll length: 60 m

Foil height: 4 mm

Item no. l [m] w [m] s [mm] G [kN/m²] Description unit

1000017 60 1 4 15Uponor pipe fixing foil 4 mm

60 m²

Uponor pipe holder clip

Plastic clip for fixation of 15-20mm pipes on steel mesh below or equal

6mm.

Item no. Description

1044181Uponor pipe holder clip for pipes 15-20mmon steel mesh below or equal 6mm 100 pcs

Uponor tying wire

For fastening Uponor pipes on reinforcement steel meshes. Made of steel.

250 pcs per bag.


1009222Uponor tying wire, 150 x 1.25

250 pcs

Uponor cable tie

For fastening Uponor pipes on reinforcement steel meshed.

Made of polyamide.

Item no. w [mm] l [mm] Description unit

1005287 5 200Uponor cable ties, length 200 mmfor the pipe assembly on support mats 100 pcs



Uponor Classic - System components and accessories

Uponor PE-Xa pipes















Uponor Q&E Coupling


1 Coupling / Brass










EEI-Int-RHC-01.1234

Uponor Radiant Heating/Cooling > Uponor Plaster Ceiling Cooling


When it comes to managing

room temperature with comfort

and cost in mind, the Uponor

plaster system is truly multital-

ented as it can be used in ceil-

ings or walls and for cooling as

well as heating.

Your advantages

Minimum installation height

A universal system for ceilings and walls mounting

Very few, optimally interacting system components

Choice of preference for decades Uponor PE-Xa pipe

9,9 x 1,1 mm

Q&E fi tting system for fast,economical installation

Quick reaction time thanks to slim plaster coverage

Saves energy thanks to optimum operating temperatures

Uponor

clamp track

Uponor

PE-Xa pipe

9,9 x 1,1

Uponor PE-Xa pipe

20x2

Uponor Q&E

T-reducer 20/9,9/20

Uponor Q&E

jointing reducer 9,9/20

Uponor plaster ceiling cooling system

Systempipe/-Fittings Additional componentsSystem components

Uponor Minitec

coupling 9,9

Uponor Minitec expander

tool

Room controls



230 V components

Control stations


20,5

Manifold/Cabinets

Uponor manifold


PE-Xa and MLCP

Uponor cabinet


valve set G 1/Rp 1

e.g. can be used with Knauf MP 75 Projection Plaster


Uponor Plaster Wall/Ceiling H/C - System components and accessories

ra

d

h

l b

Uponor clamp track 9.9


pipe holder for 9.9 x 1.1 mm Uponor PE-Xa pipes.






1005274 2500 24 13 10 20Uponor clamp track 9.9 mm

25 m

Uponor PE-Xa pipes










120 m


240 m


480 m

Uponor PE-Xa pipes












Uponor PE-Xa Q&E coupling 9.9

For Uponor PE-Xa pipe 9.9 x 1.1 mm, consisting of:

- 1 coupling






EEI-Int-RHC-01.1236


Uponor Plaster Wall/Ceiling H/C - System components and accessories

Uponor PE-Xa Q&E jointing reducer 20x9.9

For connection of Uponor PE-Xa pipes, made of brass.

Item no. d [mm] d1 [mm] Description unit

1020518 9.9 20Uponor PE-Xa Q&E jointing reducer 20 x 9.9incl. 1 PEX ring 9.9 and 1 PEX ring 20 5 pcs

Uponor PE-Xa Q&E tee reducer 20x9.9x20


Item no. d [mm] d1 [mm] d2 [mm] Description unit

1020524 20 9.9 20Uponor PE-Xa Q&E tee reducer 20 X 9.9 X 9.9incl. 1 PEX ring 9.9 and 2 PEX rings 20 5 pcs


For Uponor PE-Xa pipes 9.9 x 1.1 mm, made of brass.







Uponor PE-X ring for PE-Xa pipes

For Uponor Minitec PE-Xa pipe 9.9 x 1.1 mm; to secure fixing to Minitec

fittings





Uponor Radiant Heating/Cooling > Uponor heat emission plate

Uponor heat emission plate

Uponor heat emission plate 17mm

Made of aluminium for use with timber suspended floors, with joists at

200mm centres. For support of Uponor PE-Xa pipes 17x2mm.


1009129 1150 190Uponor heat emission plate 17 mm1150 x 190 mm 60 pcs

Uponor heat emission plate 20mm

Made of aluminium for use with timber suspended floors, with joists at

300mm centres. For support of Uponor PE-Xa pipes 20x2mm. Each pack of

40 plates covers 16m² (based on 80% floor coverage).


1009132 1150 280Uponor heat emission plate 20 mm1150 x 280 mm 40 pcs

EEI-Int-RHC-01.1238

Uponor Radiant Heating/Cooling > Uponor underfloor heating accessories

Uponor under� oor heating accessories

Uponor edging strip 150x8

Edging strip conforming to DIN 18560, made of polyethylene with self-

adhesive strip on outer face provides tight seal between edging strip and

insulation. Length of roll: 50 m

Item no. h [mm] s [mm] l [m] Description unit

1000079 150 8 50Uponor edging strip 150x8in length of 50 m 200 m

Uponor edging strip 150x10

For installation between screed and adjacent building parts for floor

constructions according to DIN 18560 and DIN EN 1264; with multiple

tear perforation, laminated PE foil, self-adhesive sealing strips, particularly

suitable for self-levelling screeds; bottom side adhesive for attachment to

wall and exact installation in wall corners

Material: Closed-cell polyethylene PE-LD

Building material class: B2

Colour: blue

Item no. h [mm] s [mm] l [m] colour [-] Description unit

1000080 150 10 50 blueUponor edging strip 150x10in length of 50 m 200 m

Uponor joint profile 100x10

Self-adhesive clamp-on profile element made of hard PVC with

polyethylene foam expansion strip, 10 mm thick, for the reliable separation

of screed sections (e.g. in doorways), and to absorb expansion of screed.

For expansion joints as per DIN 18560-2.

Height: 100 mm

Material thickness: 10 mm

Length: 2 m

Item no. h [mm] s [mm] l [m] Description unit

1000081 100 10 2Uponor joint profile/self-adhesive striplength 2 m, height 100mm, thickness 10mm 30 m

Uponor joint protection 20mm

Made of PE-LD, with slit opening, for protection of pipes up to 20 mm in


Length: 300 mm

Item no. l [mm] w [mm] s [mm] Description unit

1000082 300 80 5Uponor joint protection tube for pipesup to 20 mm 30 pcs




l

b

s

Uponor joint protection 9.9mm

Made of PE-LD, with slit opening, for protection of pipes up to 9.9 mm in


Length: 300 mm

Item no. l [mm] s [mm] w [mm] Description unit

1005269 300 2 35Uponor joint protection tube forPE-Xa pipes 9.9 x 1.1, length 300 mm 30 pcs






Thickness: 0.2 mm



Uponor foil plug

For fixing the foil on insulation. Lenght: 25 mm

Item no. l [mm] Description unit

1000016 25Uponor foil plug l=25mm

100 pcs

Uponor marking kit

For the marking of a measuring point for dampness measurement in screed,

with red marker end. The marker is secured according to DIN 18560 with

adhesive tape to the cover layer. The cover layer is not destroyed by the

marker. A minimum distance from the measuring point to the nearest

heating pipe of 10 cm must be observed.

Material requirement: 1 marker per room; for areas larger than 50 m2, more

markers are required.

Material: Rubber round rod; base made in plastic, with adhesive strip

Item no. h [mm] Description unit

1000083 100Uponor marking setheight 100 mm 10 pcs

Uponor screed additive VD 450

For use as screed and mortar bed additive; improves screed quality thanks

to enhanced plasticization and better water retention.

Do not use in conjunction with levelling or anhydrite screed!

Use for 7 cm screed thickness: approx. 0.2 l/m2

Minimum screed covering: 30 mm at 2 kN/m2 or 45 mm at 5 kN/m2 in

conjunction with Uponor insulation/system board for 5 kN/m2

Curing time: 21 days

Item no. DT [d] Con. [l/m²] Description unit

1000084 21Uponor screed additive for betterheat conductivity, type VD 450 20 l

EEI-Int-RHC-01.1240

approx. 0.2



Uponor screed additive VD 550

For use as screed and mortar bed additive; improves screed quality thanks

to enhanced plasticization and better water retention.

VD 550 N also ensures that the screed dries faster ((high early strength).

Do not use in conjunction with levelling or anhydrite screed!

Use for 7 cm screed thickness: approx. 0.2 l/m2

Minimum screed covering: 30 mm at 2 kN/m2 or 45 mm at 5 kN/m2 in

conjunction with Uponor insulation/system board for 5 kN/m2

Curing time: 8 days

Item no. DT [d] Con. [l/m²] Description unit

1000085 8Uponor screed additive for faster dryingVD 550 N 25 l

Uponor NF anti-freeze agent

Ethylene glycol-based anti-freeze agent, for use as additive in radiant

heating systems with Uponor pipes and standard heating system sealing

materials.

Vol. concentration to -20°C: 35%



Water volume in pipes (for calculation of mixing ratio):

14 x 2: 0.079 l/m

17 x 2: 0.13 l/m

20 x 2.3: 0.19 l/m

25 x 2.3: 0.33 l/m


1005066Uponor antifreezer up to - 30°Ctype NF 20 l


approx. 0.2

Uponor Radiant Heating/Cooling > Uponor underfloor heating manifolds

EEI-Int-RHC-01.1242

Uponor modular plastic manifold

1009214

1042420

1009215

1005233 14x2 100516816x2 100516917x2 100517020x2 1005171

1034524

1005100

1032702

1042471

1009217

1005605 (230 V)1000138 (24 V)

1006288

Number Item no. Item no. L

loops A B [mm]

3 1030580“ 1030583 150

4 1030581 1035084 200

6 1030582 1030585 300

A

With

balancing

screw

B

With

fl ow

meter

Manifold loops 2 3 4 5 6 7 8 9 10 11 12

1042420 Uponor plastic manifold single segment 2 1 1

1030580 Uponor plastic manifold 3 way 1 1 1

1030581 Uponor plastic manifold 4 way 1 1 1 2 1 1

1030582 Uponor plastic manifold 6 way 1 1 1 1 2

1009209 Uponor plastic manifold basic kit 1 1 1 1 1 1 1 1 1 1 1

1009209 (Uponor plastic manifold Basic Kit)


Uponor modular plastic manifolds

Uponor modular plastic manifold with balancing screw

Pack includes supply and return manifolds made of fibreglass reinforced

polyamid. Heating loop connections 3/4 MT euro-cone compatible with

Uponor compression adapters. Spacing of individual outlets 50 mm.

Manifolds can be joined to make the required number of ports. Uponor

actuators can be mounted on the return manifold. In each flow manifold

there are balancing valves for adjusting the supply in each loop.

Max. operating temperature: 60°C; Max. operating pressure: 6 bar.

Item no. outlets [-] l [mm] Description unit

1030580 3 150Uponor modular plastic manifoldwith balancing srew, 3 way 1 pcs



Uponor modular plastic manifold with flow meter

Pack includes supply and return manifolds made of fibreglass reinforced

polyamid. Heating loop connections 3/4 MT euro-cone compatible with

Uponor compression adapters. Spacing of individual outlets 50 mm.

Manifolds can be joined to make the required number of ports. Uponor

actuators can be mounted on the return manifold. Supply manifold with

adjustable and shut-off inserts (flow meter inspection window with scale of

0 – 4 l/min) for flow adjustment of individual heating loops.



1030583 3 150Uponor modular plastic manifoldwith flow meter, 3 way 1 pcs



Uponor accessories for plastic manifolds

Uponor plastic manifold single segment set

For Uponor plastic manifold with balancing screw for additional heating

loop extension. Supply segment with regulating valve, return segment

with thermostat upper section incl. cap for locking. Made of fibreglass

reinforced polyamid.


Item no. MT ["] Description unit

1042420 G 3/4Uponor plastic manifold single segmentset with balancing screw 1 set

Uponor plastic manifold single segment set with

topmeter

For Uponor modular plastic manifold with topmeter for additional heating

loop extension. Supply segment with adjustable and shut-off inserts

(topmeter inspection window with scale of 0 – 4 l/min) for flow adjustment

of individual heating loops. Return segment with thermostat upper section

incl. cap for locking. Made of fibre-glass reinforced polyamid. Max.

operating temperature: 60°C; Max. operating pressure: 6 bar.


1042471 G 3/4Uponor plastic manifold single segmentwith flow meter 1 set



Uponor accessories for plastic manifolds

Uponor plastic manifold basic kit

For Uponor modular plastic manifold including brackets, flat sealing screw

connection pieces with swivel nut, thermometer and end pieces with air

vent, filling and draining tap and a by-pass.

Item no. l [mm] Description unit

1009209 150Uponor Plastic manifold Basic kitG1" 1 set

Uponor plastic manifold elbow connection set

For connection of supply/return pipes to Uponor modular plastic manifold

from the bottom. Made of fibreglass reinforced polyamid. Max. operating

temperature: 60°C; Max. operating pressure: 6 bar.


1032702Uponor plastic manifold elbow connectionset for connection from below 1 set

Uponor hose connection for plastic manifold

For connection of refill/drainage hose 1/2" to Uponor plastic manifold.


1009214Uponor hose connection for plasticmanifold to refill and drainage valve 1 set

Uponor plastic manifold retaining ring set

For connection of Uponor plastic manifold single segments to the manifold

in case of heating loop connection from top and bottom.


1009215Uponor plastic manifold retaining ring set

1 set

Uponor flow meter for plastic manifold

For adjusting the water quantity of the individual heating loops in a range

of 0 -4 l/min. Water quantity is indicated in the inspection window. With

shut-off function. Made of fibre-glass reinforced polyamid.


1009217Uponor flow meter 0-4l/minfor Uponor plastic manifolds 1 pcs

EEI-Int-RHC-01.1244


Uponor stainless steel manifolds

Uponor stainless steel manifold with flow meter

Manifold bar with flat-sealing screw connection and 1" FT with flat gasket,

one side with air vent, filling and drain tap, revolvable for pipe connection

and a 3/4" stop at the end. Heating loop connections 3/4" MT eurocone

according to DIN V 3838 compatible with all Uponor compression adapters

eurocone.

Spacing of individual outlets 50 mm.

Supply manifold with adjustable and shut-off inserts (flow meter inspection

window with scale of 0 – 4 l/min) for flow adjustment of individual heating

loops. Return manifold with valves incl. cap for locking. Uponor actuators

can be screwed directly on the return valves.

Fastener with sound-absorbing element included. Without ball valves and

Uponor compression adapters.

Made of stainless steel.


Max. operating pressure: 6 bar.


1013051 2 195Uponor stainless steel UFH-manifold 1"with flow meter, 2 way 1 pcs











Uponor stainless steel manifold with balancing screw

Manifold bar with flat-sealing screw connection and 1" FT with flat gasket,

one side with air vent, filling and drain tap, revolvable for pipe connection

and a 3/4" stop at the end. Heating loop connections 3/4" MT eurocone

according to DIN V 3838 compatible with all Uponor compression adapters

eurocone.

Spacing of individual outlets 50 mm.

Supply manifold with control valves, manual screws for preadjustment of

valves by an allen key.

Return manifold with valves incl. cap for locking. Uponor actuators can be

screwed directly on the return valves.

Fastener with sound-absorbing element included. Without ball valves and

Uponor compression adapters.

Made of stainless steel.


Max. operating pressure: 6 bar.


1013062 2 195Uponor stainless steel UFH-manifold 1"with balancing screw, 2 way 1 pcs













Uponor manifold accessories

Uponor plastic manifold connection valve kit

For the hydraulic balancing and shut-off of the Uponor plastic manifold,

consisting of:

- G 1/Rp 1 inlet control valve for the hydraulic balancing and independent

shutt-off of the manifold, including hand wheel and display for settings/

closing

kvs value: 5.4 m3/h

- G 1/Rp 1 return valve for the shut-off of the manifold, including hand

wheel and display for closing; adaptable for Uponor plastic manifold

actuators.

kvs value: 6.4 m3/h

In conjunction with Uponor plastic manifold actuators, the

kvs value is 4.8 m3/h.

The connecting valve can be used to control individual zones.

Material: Housing made in brass, hand wheels made in polyamide

Max. testy pressure: 10 bar (water)

Item no. l [mm] h1 [mm] z [mm] MT ["] FT ["] A/F [mm] Description unit

1005100 80 50 45 G 1 Rp 1 38Uponor plastic manifold connection valveG-1/Rp 1 1 set

Uponor ball valve

Made of plated brass. With flat-sealing vertical screw connection 1 MT.

Length: 60 mm.


1032701Uponor ball valve 1 MT x 1 FTflat sealing 1 set

Uponor coupling nipple

Made of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.


1006641 3/4Uponor eurocone nipple MLC 3/4MT-3/4MT

10 pcs

l

d IG

SW

Uponor pipe connection PE-Xa 9.9

For connection of Uponor PE-Xa pipes 9.9 x 1.1 mm to Uponor manifolds

and Uponor connection box, made of brass.

Item no. d [mm] FT ["] l [mm] A/F [mm] Description unit

1005266 9.9 G 3/4 39 30Uponor PE-Xa pipe connection9.9 - 3/4 FT eurocone and one PE-X ring 10 pcs

EEI-Int-RHC-01.1246


Uponor manifold accessories


Compression adapter made of brass, for connection of Uponor PE-Xa pipes

to manifolds. Female thread 3/4"" eurocone acc. to DIN EN ISO 228-1.

Material: Brass

Item no. d [mm] s [mm] FT ["] A/F [mm] Description unit

1005168 14 2.0 G 3/4 30Uponor PE-Xa compression adapter witheurocone, 14x2.0 x 3/4 FT 10 pcs

1057368 16 1.8/2.0 G 3/4 30Uponor PE-Xa compression adapter witheurocone, 16x1.8/2.0 x 3/4 FT 10 pcs

1005170 17 2.0 G 3/4 30Uponor PE-Xa compression adapter witheurocone, 17x2.0 x 3/4 FT 10 pcs

1057370 20 1.9/2.0 G 3/4 30Uponor PE-Xa compression adapter witheurocone, 20x1.9/2.0x3/4 FT 10 pcs

SW

18

5

d

IG

Uponor plated compression adapter

Made of plated brass, for connection of Uponor PE-Xa pipes to manifolds.

Female thread 3/4" eurocone acc. to DIN EN ISO 228-1.

Item no. d [mm] FT ["] A/F [mm] p [bar] Description unit

1057441 16 G 3/4 30 6Uponor compression adapter S5.016x1.8/2.0x3/4 Eurocone plated 10 pcs

1057442 20 G 3/4 30 6Uponor compression adapter S5.020x1.9/2.0x3/4 Eurocone plated 10 pcs

Uponor compression adapter MLC 3/4" eurocone

Compression adapter made of brass, union nut and inner sleeve plated. For

connection of Uponor MLC pipes to manifolds (eg. Uponor manifold H).

Female thread 3/4" eurocone according to DIN EN ISO 228-1. Test safety

and no bevelling.

Item no. d [mm] FT ["] Description unit

1058089 14 3/4Uponor compression adapter MLC 14-3/4FTeurocone metal version 1 pcs




Uponor manifold H cap

Made of coated brass, with eurocone sealing insert.

Item no. FT ["] Description unit

1014122 G 3/4Uponor manifold H cap 3/4FT eurocone

10 pcs



Uponor pipe bend support

Uponor pipe bend support plastic

Made of impact resistant plastic to support 90° bends.


1047000 9.9Uponor pipe bend support plastic9.9 mm 50 pcs


Made of galvanized steel as bend support for the pipes in the manifold

area.


1009004 16Uponor pipe bend support14-16 mm 50 pcs

1033975 17-18Uponor pipe bend support17-18 mm 50 pcs

1009233 20Uponor pipe bend support20 mm 50 pcs

Uponor manifold cabinets

Manifold cabinet concealed version

For attachment of Uponor manifolds, Uponor controller and Uponor

pump control stations on universal rail fixation incl. fixation set. Made of

galvanized steel. All visible parts are powder coated in white colour (RAL

9010).

Cabinet width (with frame): 555-950mm

Cabinet installation depth: 120-180mm

Cabinet installation high: 820-910mm

Item no. w [mm] h [mm] Description

1046991 555 820-910Uponor cabinet concealed version, UFH1width 555mm, colour white 1 pcs




EEI-Int-RHC-01.1248


Uponor manifold cabinets

Manifold cabinet on-wall version

For attachment of Uponor manifolds, Uponor controller and Uponor

pump control stations on universal rail fixation incl. fixation set. Made of

galvanized steel. All visible parts are powder coated in white colour (RAL

9010).

Cabinet width (with frame): 555-950mm

Cabinet installation depth: 160mm

Cabinet installation high: 820mm

Item no. w [mm] h [mm] Description

1046996 555 820Uponor cabinet on-wall version, UFH1width 555mm, colour white 1 pcs





Uponor Radiant Heating/Cooling > Uponor controls

EEI-Int-RHC-01.1250

Uponor individual radio room temperature control with Dynamic Energy Management (DEM)

The Uponor individual radio room

temperature control system with

DEM has been developed on the

basis of the existing individual radio

room temperature control. Apart

from the colour of the controller

(previously white, now grey), there

are many more diff erences between

the two versions. The advanced sys-

tem comes with a range of features

that make installation even easier.

Apart from the great energy effi -

ciency during operation, fast instal-

lation and user-friendly operation

that are standard features of all

Uponor systems, the new individual

room temperature control makes

heating and cooling even more

comfortable.

The automatic balancing function

does away with time-consuming

manual hydraulic balancing. In most

cases, there is no need for recalcu-

lation of the valve settings, which is

normally required aft er a change of

the room layout or the fl oor cover-

ing. The heat distribution in the

room is evaluated by a bespoke

soft ware solution. The relevant val-

ues are stored and the system is

automatically balanced at regular

intervals. This guarantees optimum

energy distribution!

The comfort setting prevents that

heating surfaces become too cool

when the room is heated with an

alternative source (e.g. open fi re-

place). The supply diagnosis moni-

tors the heat performance in all

rooms and signals any insuffi cient

or excess supply to the I-76 inter-

face. The room bypass function is

particularly suitable for systems

with specifi c minimum fl ow require-

ments. Incorrectly assigned thermo-

stats are automatically detected and

rectifi ed by the room check func-

tion.

Your benefi t

Energy savings up to 12 %

thanks to greater effi ciency

No need for manual hydrau-

lic balancing

High time saving during

installation

More accurate and faster

control, up to 25% faster

response time

Higher comfort through

improved heat distribution

Easy to operate

Reliable operation with

minimum support

No need for recalculation af-

ter change to heating circuit

layout/size

System not aff ected by

subsequent change of fl oor

covering

Easy troubleshooting

"Clean solution" for renova-

tion

Remote control via SMS con-

nection possible

Easy, well-tried handling

Optional automatic switch

over to heating-/ or cooling

mode with the Uponor heat-

ing/cooling controller C-46

Operation of up to three

controller C-56 from one

interface I-76

Uponor radio controller

(consisting of controller and interface)

Item no. 1045562

Uponor radio thermostat

T-75

Item no. 1000502 (white)

Item no. 1000504 (silver)

Item no. 1046114 (grey)

Uponor radio controller C-56

(for system extension)

Item no. 1045565

Uponor thermostat T-54

Item no. 1045572

Uponor SMS-module

R-56

Item no. 1045570

Uponor interface I-76

Item no. 1045568

20,5

20,5


Uponor Radio control

Uponor controller with interface C-56+I-76 radio

For receiving and transforming of radio signals from the thermostats,

with integrated DEM functions

consisting of:

Controller C-56 with

- Electronic control

- Reception of max. 12 room-thermostats

- Connection of max. 14 actuators 24 Volt

- Heating/Cooling function switched by external contact

- Pump relay

- Valve exercise, pump exercise

Interface I-76 with

- Display, back lighted, new look, blue full dot matrix

- Menu in English,

Integrated functions:

- Five temperature setback progams,

- Max/min temperature limitations,

- Holiday temperature

- Automatic summer/wintertime change

- Auto adapt function

- Room check function

- Room bypass function

- The Interface can control up to 3 controllers

Accessories

External Antenna, cables for connections, mounting material

Mark of conformity: CE

Operational voltage: 230 V / 50 Hz

Max. power input per actuator: 0,2 A

Protection class: IP 30 (EN 60 529)

Colour: grey (RAL 7015)

Item no. OV [V] P [W] EP/a [W] colour [-] Description unit

1045562 230 1 >2 greyUponor controller with interfaceC-56+I-76 radio, grey 1 set

316 60

110

50 20

24 V

Uponor controller C-56 radio

For receiving and transforming of radio signals from the thermostats,

to use the DEM function with the I-76.

consisting of:

Controller C-56 with

- Electronic control

- Reception of max. 12 room-thermostats

- Connection of max. 14 actuators 24 Volt

- Heating/Cooling function switched by external contact

- Pump relay

- Valve exercise, pump exercise

- Plastic color grey (RAL 7015)

- Protection rating IP 30

Accessories

External Antenna, cables for connections, mounting material

Item no. OV [V] P [W] EP/a [W] colour [-] Description unit

1045565 230 1 >2 greyUponor controller C-56 radiogrey 1 pcs




Uponor interface I-76

For combination with the controller C-56 to use the DEM function

Interface I-76 with

- Display, back lighted, new look, blue full dot matrix

- Menu in English,

Integrated functions:

- Five temperature setback progams,

- Max/min temperature limitations,

- Holiday modus


- Auto adapt function

- Room check function

- Room bypass function

- For controling of up to 3 controllers

Protection class: IP 30 (EN 60 529)

Colour: grey (RAL 7015)

Item no. l [mm] w [mm] h [mm] Description unit

1045568 110 110 30Uponor interface I-76grey 1 pcs

Uponor thermostat display T-75 radio

Designed as a wireless single room temperature sensor, measuring the

perceived room temperature and transmitting the values to the wireless

base unit or wireless control module, with display showing the set and

measured room temperature, consisting of:

Housing with

- Temperature programming buttons

- Control electronics

Signal range: max. 30 m

Signal frequency: 868 MHz

Power supply: Alkaline battery, service life approx. 5 years, size AAA

Transmission power: approx. 1 mW

Set temperature range: 5 - 30 °C

Colour: pure white (near RAL 9010) or silver (near RAL 9006)

Item no. l [mm] w [mm] h [mm] colour [-] Description unit

1000502 124 66 16 whiteUponor thermostat display T-75 radiowhite 1 pcs

1000504 124 66 16 silverUponor thermostat display T-75 radiosilver 1 pcs

1046114 124 66 16 greyUponor thermostat display T-75 radiogrey 1 pcs

Uponor thermostat mounting kit

Accessory for wireless room sensor; use this kit to position and/or secure

the room sensor anywhere in the room on the wall; with removal/child

safety device, consisting of:

- Mounting plate with clip

- Bracket

- Adhesive pads for fixture to smooth surfaces (tiles, etc.)

Colour: pure white (near RAL 9010) or silver (near RAL 9006) or grey

Item no. colour [-] Description unit

1000503 whiteUponor thermostat mounting kitfor T-75 radio, white 1 pcs

1000505 silverUponor thermostat mounting kitfor T-75 radio, silver 1 pcs

1046115 greyUponor thermostat mounting kitfor T-75 radio, grey 1 pcs

EEI-Int-RHC-01.1252



Uponor thermostat T-55 radio

Radio thermostat, including batteries and screws for mounting. Operating

distance: max. 30 m. Set point range 6 – 30°C.


1000527 72 72 21Uponor thermostatT-55 Radio 1 pcs

Uponor thermostat public T-54

Radio thermostat with inside setting, including batteries and screws for

mounting. Operating distance: max. 30 m. Set point range 6 – 30°C.

SMS module R-56 can be connected.

Floor sensor for min/max limitation of floor temperature can be connected.


1045572 72 72 21Thermostat PublicT-54 Radio 1 pcs

Uponor SMS module R-56

For connection with the thermostat T-54, to activate and control the

system settings and monitor the actual room temperature in a reference

room via SMS.


1045570 185 75 28Uponor SMS moduleR-56 1 pcs

Uponor floor sensor

Floor sensor for connection to the thermostats (radio and wired) with

external input with sensor attached to 4m cable.

Item no. d [mm] l [mm] l1 [mm] Description unit

1000538 5 4000 25Uponor floor sensorfor T-33, T-37 1 pcs



Uponor outdoor sensor

Uponor outdoor sensor

Outdoor sensor

for connection to the Thermostats with external input

with Sensor box and seperate 5 m cable

Has to be connected to thermostat T-54 in a system with

Interface I-76 to display outdoor temperature.

- IP65

- Plastic color 7035

Item no. colour [-] Description unit

1000529Uponor outdoor sensorfor T-33, T-37, T-53 1 pcs

Uponor installation cable

Twisted pairs cable to connect:

- Interface to Controller

- Controller to Controller

- Extension for Antenna cable

Item no. l [m] Description unit

1000515 15Uponor installation cable15m 1 pcs

Uponor repeater

To solve problems with radio transmission, for on-wall mounting.

Item no. OV [V] P [W] l [mm] w [mm] h [mm] Description unit

1000518 230 < 1 160 75 26Uponor repeater230 V 1 pcs

Uponor KNX media coupler R-76

can connected the C-56 Radio to a standard KNX bus. This device will act

as a interface between the C-56 Radio and the KNX wired bus.

Conformity: CE

Protection Class: IP 30


1045571 203 75 26.5KNX Media CouplerR-76 1 pcs

EEI-Int-RHC-01.1254

light grey



Uponor 24 V individual room climate control system

Wired individual room tempera-

ture control system with wide

range of components.

The Uponor 24 V individual room

climate control system consists of

electronic components that have

been specially devised for combina-

tion with each other (3 thermostat

models, 2 controllers and optional

timer). As soon as a thermostat

detects that heating or cooling in a

room must be adjusted, the con-

troller operates the 24 V thermo

drives accordingly. The three ther-

mostat models available for this

system can be freely combined with

each other and are connected to

the controllers through non-polari-

ty 2-core cables (6-12 V) that can-

not be confused.

Choose between two controller

types

Depending on the size of the heat-

ing system and the specifi c require-

ments, you can install a 6-channel

(C-33) or 12-channel (C-35) con-

troller.

The 12-channel controller caters for

maximum 12 thermostats and 14

thermal actuators plus an optional

timer I-36. The 12-channel C-35

controller also provides the option to

switch over between heating and

cooling.

The device is wired in such a way that

several thermal actuators can be com-

bined with a single thermostat with-

out the need for wired bridges. Ther-

mostats and thermal actuators are

connected to the controller through

easy-to-use plug-in wiring terminals.

Your benefi t

Low-cost and safe thermo-

stat wiring (6-12 V)

Choice of three thermostat

models

Connection of optional fl oor

sensors

Room temperature lowering

with Uponor timer and two

timer zones

Optional limitation of set

point temperature settings

Also suitable for surface

cooling systems with dew

point monitoring

Optional automatic switch-

ing over between heating/

cooling with Uponor heat-

ing/cooling controller C-46

Important:

The Uponor 24 V individual

room climate control system

is a stand-alone system of

tailor-made components that

cannot be replaced with

third-party devices.


Uponor wired control

Uponor controller C-33, 6 channels

Controller C-33 with electronic control, connection of max. 6 Thermostats,

connection of max. 8 actuators 24 Volt, pump relay, pump / valve exercise,

power LED, plastic color RAL 9010, protection rating IP 30, accessories,

mounting material.

Item no. OV [V] l [mm] w [mm] h [mm] Description unit

1000531 24 315 110 58Uponor controller, 6 channelsC-33 wired 1 pcs

Uponor controller C-35, 12 channels

For the power supply of max. 12 room sensors (models T-33,T-35, T-37)

and max. 14 thermo drives (models TA/TR),24 V. Preassembled unit,

consisting of:

- Housing including mounting accessories

- Control electronics with microprocessor

- Pump logics

- Valve interval

- Overload protection

- Connecting cable with Euro standard plug

- Floating heating/cooling switching by external signal

- Connection port for Uponor I-35 timer with 2 temperature lowering

programs and for Uponor dew point converter

Conformity: CE

Colour: pure white (near RAL 9010)

Protection class: IP 30 (EN 60529)

Max. power consumption per TA 24: 0.2 A (switching peak)

Effective power per TA 24: <2 W


1000533 24 315 110 58Uponor controller, 12 channelsC-35 wired 1 pcs

Uponor Thermostat T-34

Wired flush mounted thermostat for room temperature control

Consisting of:

- Flush thermostat T34 with

- Dial for settings

- Sensor for air temperature

- LED for indication

- Two wires

- Plastic color RAL 9010

General functions

- Setpoint range 6-30°C

- Setting range can be limited mechanically by moving pins under the dial


1048010 81 81 14.7Uponor thermostat flush T-34 wired

1 pcs

EEI-Int-RHC-01.1256



Uponor thermostat T-35

For connection to Uponor controller C-33 or C-35 with:

- Dial for settings



- Two wires


Functions

- Setpoint range 6-30°C, mark at 21°C



1000535 72 72 21Uponor thermostatT-35 wired 1 pcs

Uponor thermostat T-37 for external sensor


- Dial for settings



- Terminal for Floor Sensor

- Two wires


Functions



- Internal setting for the Floor Senor, range print on circuit board


1000536 72 72 21Uponor thermostat f. external sensorT-37 wired 1 pcs

Uponor wall frame

Wall frame to cover standard wall boxes or in case of renovation shades of

old thermostats, size 90*90, plastic color RAL 9010


1000539 90 90 8Uponor wall framefor T-33, T-35, T-37 1 pcs




Uponor digital thermostat T-36

Consisting of:

- Digital thermostat T36

Options:

- Floor sensor (1000538) (sold seperately)

General functions

- Room temperature regulation with internal sensor

- Room or remote temperature display

- Room temperature, Room and max/min floor temp (heating/cooling) ,

remote sensor regulation selectable. - Automatic or Manual balancing

- Comfort / ECO mode.

- Lock indication

- Standby/OFF mode

- Modes displayed on LCD: Heating, Cooling, ECO, Lock, Standby,

Comfort/ECO, Auto/Man balancing.

- Displayed temperature calibration

- Window open function

- 3 button keyboard +/-/OK

- Hidden reset


1048011 85 83 25Uponor digital thermostat T-36 wired

1 pcs

Uponor programmable digital thermostat T-38

Consisting of:

- Programmable digital thermostat T38

Options:

- Floor sensor (1000538) (sold seperately)

General functions

- Room or remote temperature display.

- Room temperature, Room and max/min floor temp (heating/cooling) ,

remote sensor regulation selectable.

- Automatic or Manual balancing

- Comfort / ECO mode.

- Lock indication.

- Standby/OFF mode

- 4 Pre pre-recorded modifiable programs for working days / week-end /

week

- Date and time, with summer/winter change, power failure proof

- Hidden reset

- Temporary or permanent override mode

- Modes displayed on LCD: Heating, Cooling, Lock, Standby, Holiday,

Comfort/ECO

- Displayed temperature calibration

- Window open function

- Powered by base unit (no batteries)


1048012 85 83 25Uponor programmable digital thermostat T-38 wired

1 pcs

EEI-Int-RHC-01.1258



Uponor thermostat Public T-33


- Plain cover

- Internal setting


- Terminal for Floor Sensor

- Two wires


Functions


- Internal setting for the Floor Senor

- Room sensor

- Max/min limitation with floor sensor


1000537 72 72 21Uponor thermostat publicT-33 wired 1 pcs

Uponor timer I-36

Consisting of:

- Programmable digital timer I36

General functions

- 2 zones programming comfort / ECO

- Display of zone status and time

- Pre-recorded modifiable programs for working days / week-end / week

- Date and time, with summer/winter change, power failure proof

- Lock mode, standby OFF mode

- Hidden reset

- Temporary or permanent override mode

- Dry contact input for forced ECO mode.

- Example: Signal from Uponor R-56 SMS module for remote control

- Powered by base unit (no batteries)


1048013 85 83 25Uponor timer I-36 for C-35

1 pcs

Uponor control accessories 24 V

Uponor actuator 24V

24 V, with open/closed indicator, suitable for use with Uponor plastic

manifolds in connection with Uponor radio or wired control system. Closes

when idle. With all-round shower protection (IP 54). Suitable for operation

at ambient temperature of up to 60°C.

Threaded connector M 30 x 1.5 mm MT.

Height: 54 mm.

Item no. MT [-] d [mm] h [mm] OV [V] P [W] Description unit

1000138 30x1.5 40 54 24 < 2Uponor actuator 24V for plasticmanifold, 30 x 1,5 MT 1 pcs

Uponor actuator 24V

24 V, with open/closed indicator, suitable for use with Uponor stainless

steel manifolds in connection with Uponor control system. Closes when

idle. With all-round shower protection (IP 54). Suitable for operation at

ambient temperature of up to 60°C.

Threaded connector M 30 x 1.5 mm FT.

Height: 56 mm

Item no. FT m [-] d [mm] h [mm] OV [V] P [W] Description unit

1013008 30x1.5 40 56 24 ~ 2Uponor actuator 24V for stainlesssteel manifold, 30 x 1,5 FT 1 pcs




Uponor return temperature limiter

For use in low-temperature range for combined underfloor/ radiator

heating systems respectively wall-radiator heating systems for the

regulation of the return temperature of small heating areas up to max. 15

m2. Consists of installation casing with cover, fast-action air vent valve,

thermostat for return temperature limiting set between 25 and 65 °C.

Factory-made limitation of return temperature approx. 50°C. Suitable for

Uponor compression adapter with 3/4" eurocone.

Dimensions: (H x W x D) 150 x 122 x 65 mm

D after installation: 5 mm


1013005Uponor return temperature limiter

1 pcs


Uponor Controller C-23

Uponor Controller C-23 for wiring up to 6 room thermostats and max. 14

actuators. Up to 4 actuators per channel are possible.

Optional: pump relay. IP43.

Item no. l [mm] w [mm] h [mm] OV [V] Description unit

1058426 310 90 65 230Uponor Controller C-23230V, WIRED 1 pcs

Uponor Pump Relay for Controller C-23

Pump relay for C-23 6 room Controller


1058427 310 90Uponor Pump Relay for Controller C-23230V, WIRED 1 pcs

Uponor Thermostat T-23

Standard Thermostat 230 V, with on/off contact


1058422Uponor Thermostat T-23230V, WIRED 1 pcs

Uponor Thermostat Flush T-24

Flush Mounted Thermostat 230 V. On/off contact, insulated cover,

protective cap, frame (neutral), 50 x 50 mm cover, pure white , glossy


1058423Uponor Thermostat Flush T-24230V, WIRED 1 pcs

EEI-Int-RHC-01.1260



Uponor Thermostat H/C T-25

Heating/Cooling Thermostat 230 V with a change over contact for

maximum 5 actuators and a heating / cooling switch. For 2 pipe

installation, specially for heatpump.


1058424Uponor Thermostat H/C T-25230V, WIRED 1 pcs

Uponor Thermostat Prog. Digital T-26

Digital Programmable Thermostat 230V. Energy saving feature calculates

heat up time of system. Includes holiday mode, temporary over-ride and

specified duration, 5/2 or 7 day programme, floor temperature control,

lock facility, status display on current thermostat mode.


1058425Uponor Thermostat Prog. Digital T-26230V, WIRED 1 pcs


Uponor actuator 230 V

230 V, with open/closed indicator, suitable for use with Uponor plastic

manifolds. Closes when idle. With all-round shower protection (IP 54).

Suitable for operation at ambient temperature of up to 60°C.

Threaded connector M 30 x 1.5 mm MT.

Height: 54 mm.

Item no. MT [-] d [mm] h [mm] OV [V] P [W] Description unit

1005605 30x1.5 40 54 230 < 3Uponor actuator 230V for plasticmanifold, 30 x 1.5 MT 1 pcs

Uponor actuator 230 V

230 V, with open/closed indicator, suitable for use with Uponor stainless

steel manifolds. Closes when idle. With all-round shower protection (IP 54).

Suitable for operation at ambient temperature of up to 60°C.

Threaded connector M 30 x 1.5 mm FT.

Height: 56 mm

Item no. FT m [-] d [mm] h [mm] OV [V] P [W] Description unit

1013006 30x1.5 40 56 230 ~ 3Uponor actuator 230V for stainlesssteel manifold, 30 x 1,5 FT 1 pcs



EEI-Int-RHC-01.1262

Uponor Controls

Heating-supply temperature control with radio individual room

temperature control

Functional description

The wireless room temperature sensor measures the

operative room temperature. Through the wireless con-

troller, the thermal actuators and manifold valves, it

controls the heat release from the respective room heat-

ing surface. The wireless basic control unit allows for

The diagram shows a simplifi ed illustration of the key control components. For detailed instruc-

tions regarding the installation and operation of the system, refer to the manuals shipped with the

components or download the relevant documents from www.uponor.com.

Components

1 Radio controller C-56 with interface I-76

2 Radio controller C-56

3 Antenna

4 Wireless thermostat

5 Climate controller C-46

6 Supply/return sensor

7 Outdoor sensor

8 Manifold

9 heating source

4

6 6 5

1

4

2 x 0,5 mm2

max. 20 m(je Verbindung)

4

2

2 x 0,4 mm2

max. 50 m

7

23 3

9

3

M

99

8

individual room temperature control. It is thus for exam-

ple possible to assign diff erent temperature lowering

times to diff erent rooms. Together with the remote con-

trol system, the C-46 heating controller adjusts the sup-

ply temperature depending on the actual weather con-

ditions and the programmed heating times.



heating/cooling - supply temperature control with automatic H/C

switchover valve powerd by boiler and chiller

Functional description

Depending on the outdoor and room temperature, the

C-46 heating/cooling controller switches the switch-

over valve installed by the operator from the heating to

the cooling source. The H/C switching module switches

the C55/C56 wireless controller from heating to cooling

mode, as the manifold valves must be opened as the

room temperature increases (reverse operation of ther-

mal actuators). For cooling, the relative air humidity in

the room must also be measured, in addition to the

room temperature. This is done through the humidity

sensor H-56. It is important to prevent that the temper-

The diagram shows a simplifi ed illustration of the key control components. For detailed instruc-

tions regarding the installation and operation of the system, refer to the manuals shipped with the

components or download the relevant documents from www.uponor.com.

Components

1 Radio controller C-56 with interface I-76

2 Radio controller C-56

3 Antenna

4 Wireless thermostat

5 H/C relay

6 Climate controller C-46

7 Supply/return sensor

8 Outdoor sensor

9 Chiller

10 Switch-over valve

ature drops below the dew point, as this would lead to

condensation on cold system components. The C-46

heating/cooling controller regulates the cooling water

supply temperature through the control valve to keep it

above the dew point temperature. This ensures that the

system components from the control valve downwards

are protected against damage from condensation that

tends to occur when the actual temperature drops

below the dew point. Depending on the cooling water

temperature, the system components from the chiller to

the control valve must be insulated with diff usion-tight

material.

4

7

9

7 6

1

4

2 x 0,5 mm2

max. 20 m

2 x 0,5 mm2

max. 20 m(je Verbindung)

4

2

2 x 0,4 mm2

max. 50 m

8

23 3

10

3

M

100 m (vom Elektrofach-betrieb zu prüfen)


Uponor climate controller

Uponor climate controller C-46

Weather compensator controlling supply water in heating.

Can be integrated in the C-56 system via bus connection.

Consisting of:

- Climate Controller C-46

- Wired Outdoor sensor

- Wired Supply sensor

Options:

- Antenna Module for connection to wireless Thermostats

- Wired Indoor sensor

- Wired Return sensor.

General functions

- Installation wizard gives easy and fast installation & set-up

- Quick menu system gives easy access to basic settings

- Integration with C-56 system via bus gives CC access to zone data from

C-56.

- System information, H/C-state, ECO-mode etc are also shared on the

bus.


- ECO/Comfort timer in CC if no I-76 in the system.

- Clock backup 8 hours

- Alarm at disturbance

- Pumpmanagement with internal fuse

- Supports 24V Thermal Actuator

or 0-10V controlled rotating mixer motor,

or variable speed pump

- General purpose input for Heating+Cooling switch

or Snow detection

- General purpose output for Heating+Cooling command

or Dehumidification command

or Error signalling

- Input indoor sensor

- Input outdoor sensor

- Input Supply Sensor

- Input Return Sensor

Accessories

Outdoor sensor (5m cable), Supply sensor (4m cable), mounting material


1047844 174 106 80Uponor climate controller C-46

1 pcs

EEI-Int-RHC-01.1264



Uponor climate controller C-46 extended

Weather compensator controlling supply water in heating + cooling

Can be integrated in the C-56 system via bus connection.

Consisting of:

- Climate Controller C-46

- Antenna

- Wireless Humidity Sensor H-56

- Wired Outdoor sensor

- Wired Supply sensor

Options:

- Wired Indoor sensor

- Wired Return sensor

- Additional 5 RH-sensors

General functions

- Installation wizard gives easy and fast installation & set-up

- Quick menu system gives easy access to basic settings

- Integration with C-56 system via bus gives CC access to zone data from

C-56.

- System information, H/C-state, ECO-mode etc are also shared on the

bus.


- ECO/Comfort timer in CC if no I-76 in the system.

- Clock backup 8 hours

- Alarm at disturbance

- Pumpmanagement with internal fuse

- Supports 24V Thermal Actuator

or 0-10V controlled rotating mixer motor,

or variable speed pump

- General purpose input for Heating+Cooling switch

or Snow detection

- General purpose output for Heating+Cooling command

or Dehumidification command

or Error signalling

- Input indoor sensor

- Input outdoor sensor

- Input supply sensor

- Input return sensor

Humidity Sensor H-56:

- Wireless RH sensor with battery alarm

- incl Batteries and mounting kit

- Connects to C-46 with antenna or via C-56

Accessories

Outdoor sensor (5m cable), Supply sensor (4m cable), mounting material ,

3m Antenna cable


1047845 174 106 80Uponor climate controller C-46 extended

1 pcs

Uponor humidity sensor H-56

- Wireless RH sensor with battery alarm

- incl Batteries and mounting kit

- Connects to C-46 with antenna or via C-56


1047846 72 72 21Uponor humidity sensor H-56

1 pcs




Uponor supply or return sensor for C-46

- For connection directly to C-46

- Sensor with 4m wire.

Note: Return sensor only needed for average temperature control


1047847Uponor supply or return sensor for C-46

1 pcs

Uponor outdoor or indoor sensor for C-46

- For connection directly to C-46

- Additional connection wire needed.


1047848Uponor outdoor or indoor sensor

1 pcs

Uponor relay H/C, 24 V

For automatic heating/cooling switchover on external signal.


1000516 24 160 50 95Uponor relay H/C24 V 1 pcs

1000517 230 160 50 95Uponor relay H/C230 V 1 pcs

Uponor Mixer Motor

For mounting on a mixing valve and used in combination with the C-46.

Externally powerd.


1002356Uponor Mixer motor 24Vwith 0-10V signal 1 pcs

1002357Uponor Mixer motor 230V / 3PT

1 pcs

Uponor Wall Power Supply

230V/24V Power supply with Euro-plug for 0-10V controlled mixer motor.


1048763Uponor Power supply 230V/24Vfor C-46 mixer motor 1 pcs

EEI-Int-RHC-01.1266



Uponor control stations for heating/cooling

UFH systems

RS2

Uponor room control

station

RS 2 up to 2 kW

Unit set 6

Uponor constant tempera-

ture control unit set 6

up to 6 kW

Push 23

Uponor pump group

up to 10 kW

MPG 10

Uponor pump group

3 to 10 kW

with controller

Unit set type 1

Uponor pump group

up to 12 kW

CPG 15

Uponor central pump group

3 to 15 kW

with controller

Control stations

Minitec

Siccus

Tecto

Self attach-

ing system

Tacker &

Clamp track

Pipe positi-

oning panel

Classic


Uponor control stations

Uponor room control station RS 2

Pumpgroup for control of UFH in single rooms, with

brass-housing, bracket for front-or backside installation, integrated pump

grundfos UP15-14B, venting screw, secondary max.- limiter 25-55°C,

balancing valve, actuator 230V,

1-3 kW

max. 90° primary, max. 55° secondary, max. 10 bar

valve kvs 1,25 m³/h

Pump 15-40 for 0,1-0,45 ³/h 1,2-03, m, 230V, 30W,

connection:

secondary loop 3/4"" eurocone

primary valves with clampconnection for CU-Pipe 15mm

Pump needs 230V pump power supply with external switch.

connectible to electrical thermostats no. 1000132

calculation example for Rl,B 0,05m²K/W (tiles)

pipe 9,9x1,1 100mm 2 loops a' 60m, =2x 6m² 0,96kW

pipe 14x2 150mm 2loops a' 60m = 2x 9m² 1,8 kW

pipe 17x2 150mm 2loops a' 90m = 2x14m² 2,8 kW

pipe 20x2,0 150mm 2loops a' 105m = 2x16m² 3,2 kW

Item no. Q [kW] l [mm] w [mm] h [mm] c/c [mm] c/c1 [mm] Description unit

1005576 2 360 145 80 60 40Uponor Room control unit RS 2up to 2 kW with actuator 230V FT 1 pcs

G 3/4

G 3/4 G 3/4

ra

l

Uponor branch connection

For extension of RS 2 room control station to 2 heating circuits; direct

connection of heating circuit G 3/4 fitting with Euro cone

Each kit includes 2 fittings.

Material: Brass

Item no. l [mm] c/c [mm] Description unit

1005675 50 40Uponor branch connection for connectionof two loops to Uponor RS 2 1 set

Uponor Push 23

Pumpgroup with thermostat and pump energy efficiency class A,

Thermostat with capillary sensor 20-55°C for supply temp.,

Pump Grundfos Alpha2L 15-60 0,1-2,4 m³/h, H: 4-0,9 m

supply thermostat valve kvs 0,9 m³/h

return balancing valve kvs 2,0 m³/h

secondary connections G1A for connection to uponor UFHC manifolds,

10 kW



1046870Uponor push 23 A, pump and mixing groupfor constant temperature control 1 pcs

EEI-Int-RHC-01.1268



Uponor Manifold Pump Group MPG 10

Pumpgroup for connection to Uponor UFHC-manifolds,

installation with manifolds on-wall or in cabinets,

pre-mounted with supply temperature control C-46 with integrated

interface to uponor single room control C-56

3-way-mixing valve, motor drive

kvs 4,0

pump energy efficiency class A (Grundfos alpha2L 25-60)

0,1 - 2,5 m³/h H: 6,0-1 m

proportional pressure control

primary ballvalves, connection Rp1 (FT)

secondary connection G1A (MT)

supplytemperature sensor

outdoor temperature sensor (install. on buildingsite)

3-10 kW



1048780Uponor Manifold Pump Group MPG 10with controller 1 pcs

Uponor Manifold Pump Group MPG 10 without

controller

to connect to uponor UFHC-manifolds,

installation with manifolds on-wall or in cabinets,

without actuator, without control ,

for connection to external boiler control or connection to Uponor climate

controller C-46 heating/cooling,

requires Motor 1002356 or 1002357

3-way-valve mixing

kvs 4,3


Q: 0,1-2,5 m³/h, H: 6-2,4 m


connection G1A secondary

ball valve+balancing valve primary

for installation left or right of manifold

3-10 kW

max. 90° primary, max. 60° secondary


1048781Uponor Manifold Pumpgroup MPG 10without controller 1 pcs




Uponor Central Pump group CPG 15

Pumpgroup for installation in boiler rooms or on-wall with Uponor UFHC-

manifolds, pre-mounted with supply temperature control C-46 with

integrated interface to Uponor single room control C-56

3-way-mixing valve, motor drive

kvs 6,3


0,1 - 2,5 m³/h H: 6,0-1 m


primary ball valves, connection Rp1 (FT)

secondary connection G1A (MT)

supply temperature sensor

outdoor temperature sensor (install. on buildingsite)

3-15 kW



1048782Uponor Central Pump group CPG 15with controller 1 pcs

Uponor Central Pump group CPG 15 without

controller

installation in boiler rooms ,

without actuator, without control ,

for connection to external boiler control or connection to Uponor climate

controller C-46 heating/cooling,

requires Motor 1002356 or 1002357

3-way-mixing valve, for motor drive 1002356 or 1002357

kvs 6,3


Q: 0,1-2,5 m³/h, H: 6-2,4 m


primary connection Rp1 (FT)

secondary ballvalves, connection Rp1 (FT)

3-15 kW



1048783Uponor Central Pumpgroup CPG 15without controller 1 pcs

EEI-Int-RHC-01.1270

Uponor Radiant Heating/Cooling > Uponor industrial underfloor heating


Uponor Industrial Under� oor Heating

Uponor industrial underfl oor

heating is a low-temperature

heat distribution system for

heating industrial spaces. The

system is built directly into the

concrete fl oor slab. It is even

possible to make use of the

standard steel reinforcement

for the concrete slab as a support structure for the heating pipes.

Heat can be supplied by any conventional warm water heating

system designed for use in the type of building being in question.

Your advantages

Rapid return on investment

Total design space freedom

Optimal building space utilisation

Uniform temperature profi le

Low air speeds

No dust circulation

Stimulating working environment

No maintenance costs

Proven technology

Extensive declaration of liability

System components

Uponor industrial

clamp track

Systempipe / -Fittings Additional components Manifold / Cabinets

Uponor industrial

manifold 25-G 11/2

Uponor cable tie Uponor Q&E PPSU coupling

Uponor pipe clips Uponor Q&E brass

connection with male thread

Uponor PE-Xa pipe 25x2.3

or 20x2.0

150

/2

D

Uponor tying wire

Uponor pipe bend suport

Uponor conduit


Uponor industrial � oor heating PE-Xa pipes

Uponor PE-Xa pipes
























1023448 25 2.3 205 6Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 205 m 205 m



Uponor PE-Xa Q&E � ttings

Uponor Q&E PPSU coupling equal

Made of PPSU.

Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] p [bar] Description unit

1008932 20 6+10Uponor Q&E PPSU coupling 20-20

5 pcs


5 pcs

l

d

SWSW1

z

IG

l

d

SWSW1

z

AG


Compression adapter made of brass, for connection of Uponor PE-X pipes

with 3/4" female thread.

Item no. d [mm] MT ["] FT ["] l [mm] A/F [mm] z [mm] Description unit

1005295 25 R 3/4 50 37/27 15Uponor compression adapter 25x2.3-3/4"MT

10 pcs

1005296 25 Rp 1 40 37/38 8Uponor compression adapter 25x2.3-1" FT

10 pcs

1005297 25 Rp 3/4 35 37/31 8Uponor compression adapter 25x2.3-3/4 FT

10 pcs

1005298 25 R 1 53 37/34 20Uponor compression adapter 25x2.3-1" MT

10 pcs

EEI-Int-RHC-01.1272


Uponor PE-Xa Q&E � ttings

Uponor Q&E brass connection with male thread

Made of DR brass. Male thread acc.to DIN EN 10226-1 for sealing in.


Item no. d [mm] MT ["] p [bar] Description unit

1023006 20 R 3/4 6+10Uponor Q&E connection with male threadtaper, 20-3/4 5 pcs


1023008 25 R1 6+10Uponor Q&E connection with male threadtaper, 25-1 5 pcs

Uponor Q&E brass connection with female thread

Made of DR brass. Female thread acc. to DIN EN 10226-1.


Item no. d [mm] FT ["] p [bar] Description unit

1023011 20 Rp 3/4 6+10Uponor Q&E connection with female thread20-3/4 5 pcs


1023013 25 Rp 1 6+10Uponor Q&E connection with female thread25-1 5 pcs

Uponor Q&E ring natural

Made of PE-X. Uponor Q&E rings natural intended for Uponor Q&E

fittings. For PE-Xa pipe dimensions 16, 20, 25, 32, 40, 50 and 63 mm.

Item no. d [mm] colour [-] p [bar] Description unit

1042836 20 natural 6+10Uponor Q&E ring natural with stop edgeUponor PE-Xa dim 20 mm 20 pcs

1042840 25 natural 6+10Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 25 mm 20 pcs

Uponor industrial � oor heating � xation and accessories

ra

d

h

l b

Uponor industrial clamp track

Uponor clamp track for fixation of Uponor PEX pipes.

Item no. w [mm] h [mm] d [mm] c/c [mm] l [mm] Description unit

1005290 50 34 25 50 3000Uponor clamp track for 25 mm pipes

30 m


30 m


For fastening the Uponor clamp track 25

Item no. w [mm] h [mm] Description unit

1005291 36 50Uponor fastening nail forindustrial floor heating clamp track 500 pcs



Uponor industrial � oor heating � xation and accessories

Uponor pipe clips

For fastening Uponor pipes on reinforcement steel meshes.

Item no. h [mm] h1 [mm] w [mm] d [mm] d1 [mm] Description unit

1005289 57 27 38 25 3-8Uponor pipe clipsfor PE-Xa pipe 25x2.3 250 pcs

Uponor cable tie


Made of polyamide.




Uponor tying wire


250 pcs per bag.



250 pcs



area.


1009233 20Uponor pipe bend support20 mm 50 pcs


Uponor conduit

Corrugated, fire classification E conforming to DIN EN 13501-1. Supplied

in coils.

Item no. d [mm] d1 [mm] d2 [mm] colour [-] Description unit

1012869 35/29 25 blackUponor conduit black 35/29 MLC 25

50 m

EEI-Int-RHC-01.1274


Uponor industrial � oor heating manifold and accessories

Uponor industrial manifold 25-G 11/2

Uponor Industrial Manifold 25-G 11/2

as supply / return for Industrialheating, made of:

- supply-segment, with control valves for preadjustment, heating loop

connection for PE-Xa Pipe 25x2,3 with compression adapter.

- return-segment with thermostat upper section incl. cap for locking,

Uponor actuator can be mounted directly on the return manifold , heating

loop connection for PE-Xa Pipe 25x2,3 with compression adapter

Spacing of outlet: 100 mm

Material: fibreglass reinforced Polyamid

max. operating temperatur: 60 °C

max. operating pressure 6 bar

induvidual combination up to 20 loops max.

Number of needed brackets

loops 2-5 6-9 10-14 15-19 20

bracket 2 3 4 5 6


1045813Uponor industrial manifold 25-G 1 1/2"

1 set

Uponor industrial manifold G3/4 Eurcone

as supply / return for Industrialheating, made of:

- supply-segment, with control valves for preadjustment, heating loop

connection for G3/4 eurocone.

- return-segment with thermostat upper section incl. cap for locking,

Uponor actuator can be mouinted directly on the return manifold , heating

loop connection for G3/4 eurocone.

Spacing of outlet: 100 mm


max. operating temperatur: 60 °C

max. operating pressure: 6 bar

induvidual combination up to 20 loops max.

Quantity necesary bracket

loops 2-5 6-9 10-14 15-19 20

bracket 2 3 4 5 6


1045814Uponor industrial manifold G3/4 eurocone

1 set

Uponor industrial manifold basic kit

Uponor Industrial Manifold Basic Kit

for mounting the industrial manifold, made of:

- 2 St. brackets short

- 2 St. brackets long

- 2 St. filling valve brass

- 2 St. thermometer 0 - 60°C

- 1 St. manometer

- 2 St. endcap

- 2 St. flat sealing screw connection piece with swivel nut

- 1 St. mounting material: 8x screws 6x60mm

8x plastic anchor 8x40mm

2x flat sealing 44x32x2


1045815Uponor industrial manifold basic kit

1 set



Uponor industrial � oor heating manifold and accessories

Uponor industrial manifold bracket kit

Uponor Industrial Manifold Bracket Kit

for mounting the Industrial manifold, made of:

- 2 St. brackets short

- 2 St. brackets long

- 1 St. mounting material: 8x screws 6x60mm

8x plastic anchor 8x40mm


1045816Uponor industrial manifold bracket kit

1 set

Uponor industrial flowmeter

Uponor Industrial Flowmeter

For adjusting the water quantity of the individual heating loops in a range

of 4 -20 l/min. Water quantity is indicated in the inspection window. With

shut-off function. Made of fibre-glass reinforced polyamid.



1030134Uponor industial flowmeter

1 pcs

Uponor industrial ball valve G 11/2

Uponor Industrial Ball Valve G 11/2

for use with the Uponor Industrial manifold G 11/2

connection:

- G 11/2 FT

- G 11/2 MT

Material: brass


1030135Uponor industrial ball valve G 1 1/2"

1 set

EEI-Int-RHC-01.1276

Uponor Radiant Heating/Cooling > Uponor snow and ice melting




system is best suitable for all

outside surfaces which are

provided with a solid covering.

It will be especially used for

driveways, ramps, fi re

department or hospital

approach roads, helicopter

landing zones, sidewalks, football pitches, etc..

Your advantages

System ensures a maximum of security - round the clock

Automatically deicing, no more shoveling of snow

Avoids environmental stress and damage through de-icing

salt

Usage of industrial waste heat possible

Fast and easy installation with robust Uponor PE-X pipes

Complete system with all components available

Reduces slip and fall liability

System components Systempipe / -Fittings Additional components Manifold / Cabinets

Uponor compression

adapter

PE-X

Uponor industrial clamp

track

Uponor Manifolds


Uponor Supply pipes

Uponor tying wire

Uponor supply accessories

Uponor electrofusion

fi tting


pipe 25x2.3

D

Uponor cable tie Uponor pipe bend suport

Uponor conduit


Uponor snow and ice melting pipes

Uponor snow and ice melting pipe

Uponor snow and ice melting pipes manufactured from cross-linked

polyethylene, complying with e.g. EN ISO 15875 ”Plastics piping


Application for underfloor heating up to 50 °C water temperature

Design pressure 4 bar.


1022341Uponor Meltaway PE-X pipe 25x2.3920 m 920 m

1033625Uponor Meltaway PE-X pipe 25x2.31020 m 1020 m

1033626Uponor Meltaway PE-X pipe 25x2.3other lengths <1000m 1 m

Uponor snow and ice melting manifold and accessories

Uponor manifolds

Uponor snow and ice melting single manifold made of high density

polyethylene (HDPE) pipe and equipped with compact-welded couplings.

Couplings between centres are 500mm.


1033637Uponor Meltaway manifold 10 waysingle outlet, C/C 600 75 6m 1 pcs









Uponor manifolds

Uponor snow and ice melting single manifold made of high density

polyethylene (HDPE) pipe and equipped with compact-welded couplings.

Couplings between centres are 500mm.





EEI-Int-RHC-01.1278



Uponor manifolds

Uponor snow and ice melting double manifold made of high density

polyethylene (HDPE) pipe and equipped with compact-welded couplings

oriented in two directions with an angle of 120° between them.


1033634Uponor Meltaway manifold 12 waydouble outlet, C/C 500 75 6m 1 pcs





Uponor coupling

Uponor straight couplings for snow and ice melting PE-X pipes 25x2.3

Made of HDPE.


1033672Uponor Meltaway coupling 25x2.3 mmshort, 145 mm 1 pcs

1033678Uponor Meltaway coupling 25x2.3 mmlong, 290 mm 1 pcs

Uponor supply pipes

Uponor snow and ice melting supply pipes made of HDPE.


1033628Uponor HDPE supply pipe 75x6.8 mmL=6000 mm 1 m



Uponor supply pipes tees

Uponor snow and ice melting tees made of HDPE.


1033648Uponor tee 75

1 pcs


1 pcs


1 pcs




Uponor supply pipes elbows

Uponor snow and ice melting elbows made of HDPE.


1033652Uponor elbow 75 x 90°

1 pcs


1 pcs


1 pcs

Uponor supply pipes reducer

Uponor snow and ice melting reducer made of HDPE.


1056656Uponor reducer 110-75

1 pcs

1033657Uponor reducer 160 - 110

1 pcs

Uponor supply pipes end cap

Uponor snow and ice melting end cap made of HDPE.


1033659Uponor end cap 75

1 pcs


1 pcs


1 pcs

Uponor flange support

Uponor snow and ice melting flange support for connection of Uponor

flange to supply/return pipes. Made of HDPE.


1033662Uponor flange support 75

1 pcs


1 pcs


1 pcs

EEI-Int-RHC-01.1280



Uponor flange

Uponor snow and ice melting flange made of HDPE.


1033666Uponor flange 75x6.8 mm

1 pcs


1 pcs


1 pcs

Uponor electrofusion fitting

Uponor snow and ice melting electrofusion fittings made of HDPE.


1033673Uponor electrofusion fittingfor pipe 75x6.8 mm 1 pcs



ra

d

h

l b

Uponor industrial clamp track

Uponor clamp track for fixation of Uponor PEX pipes.

Item no. w [mm] h [mm] d [mm] c/c [mm] l [mm] Description unit


30 m


For fastening the Uponor clamp track 25

Item no. w [mm] h [mm] Description unit

1005291 36 50Uponor fastening nail forindustrial floor heating clamp track 500 pcs

Uponor cable tie


Made of polyamide.







Uponor tying wire


250 pcs per bag.



250 pcs



area.



Uponor conduit


in coils.



50 m

l

d

SWSW1

z

IG

l

d

SWSW1

z

AG


Compression adapter made of brass, for connection of Uponor PE-X pipes

with 3/4" female thread.

Item no. d [mm] MT ["] FT ["] l [mm] A/F [mm] z [mm] Description unit

1005297 25 Rp 3/4 35 37/31 8Uponor compression adapter 25x2.3-3/4 FT

10 pcs

1005296 25 Rp 1 40 37/38 8Uponor compression adapter 25x2.3-1" FT

10 pcs

1005295 25 R 3/4 50 37/27 15Uponor compression adapter 25x2.3-3/4"MT

10 pcs

1005298 25 R 1 53 37/34 20Uponor compression adapter 25x2.3-1" MT

10 pcs

Uponor chamfering tool

For de-studding the Uponor snow and ice melting pipe.


1033689Uponor Meltaway chamfering toolfor Uponor Meltaway 25 mm pipe 1 pcs

EEI-Int-RHC-01.1282

Uponor Radiant Heating/Cooling > Uponor sport floor heating


Uponor sports � oor heating

Uponor radiant heating system

for surface elastic fl oors. These

fl oors are a synthesis of woo-

den swing fl oors with elastic

layer made of PVC or linoleum.

The heating registers runs in

pipe holders (Patent Uponor)

directly under the blind fl oor.

The pipes are to be connected to distribute- /collector pipes.

Uponor sports fl oor heating systems are quick installed. First due

to the fl exible and at the same time robust PE-Xa pipe material.

Secondly due to the patented mounting principle for swing fl oor

constructions.

Your advantages

Sports fl oor heating systems off er high thermal comfort

Provides mild radiant heat and an even temperature

distribution with low air speed

Gives athletes and architectures all freedom, because the

system is invisible

Takes all hygienic and physiologic requirements of sports

halls into consideration

Energy saving due to operation with low heating water

temperatures

System components

Uponor pipe fi xation

Systempipe / -Fittings

Uponor eval PE-Xa pipe in

coils

Additional components Manifold / Cabinets

Uponor Q&E tichelmann

manifold for sportsfl oor UFH

Uponor pipe fi xation

double

sprung fl oors

Uponor pipe bend suport

Uponor conduit


Uponor sport � oor PE-Xa pipes

















Uponor sport � oor PE-Xa Q&E � ttings


Made of PPSU.




5 pcs

Uponor Q&E brass connection with male thread

Made of DR brass. Male thread acc.to DIN EN 10226-1 for sealing in.


Item no. d [mm] MT ["] p [bar] Description unit


1023008 25 R1 6+10Uponor Q&E connection with male threadtaper, 25-1 5 pcs






1023013 25 Rp 1 6+10Uponor Q&E connection with female thread25-1 5 pcs





1042840 25 natural 6+10Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 25 mm 20 pcs

EEI-Int-RHC-01.1284


Uponor sport � oor � xation and accessories

Uponor pipe fixation

For exact leading of pipes inside the channels of sport floor

Material: Polyamid

Item no. l [mm] sd [mm] c/c [mm] l1 [mm] h [mm] Description unit

1005286 290 45 100 145 50Uponor pipe clip trackfor floors in gyms. Polyamid 25 pcs

Uponor pipe fixation double

For exact leading of pipes in the bending zone of chanels of sport floor

Material: galvanised steel

Item no. l1 [mm] c/c [mm] l [mm] Description unit

1005284 105 100 975Uponor double pipe clip track for floorsin gyms. galvanised steel 1 pcs

Q&E tichelmann manifold 2 circuits for sportsfloor

UFH

as manifold for the use in sportsfl oor UFH systems according to

theTichelmann principle. For connection of Uponor PE-Xa pipes

25x2.3mmwith Uponor Q&E connection technology consisting of:-

1 manifold (distributor & collector)- 4 Q&E rings 25- 2 Q&E rings

40Material: Uponor eval PE-Xa pipes + Uponor PPSU fittings.

Item no. d [mm] l [mm] c/c [mm] Description unit

1046747 40 2084 150Uponor Q&E tichelmann manifold2 circuits for sportsfloor UFH 1 set

Q&E tichelmann manifold for sportsfloor UFH

as manifold for the use in sportsfloor UFH systems according to the

Tichelmann principle. For connection of Uponor PE-Xa pipes 25x2.3mm

with Uponor Q&E connection technology consisting of:

- 1 manifold (distributor & collector)

- 6 Q&E rings 25

- 2 Q&E rings 40

Material: Uponor eval PE-Xa pipes + Uponor PPSU fittings


1046748 40 2084 150Q&E tichelmann manifold for sportsfloor UFH

1 set

Q&E tichelmann manifold end segment for

sportsfloor UFH

as manifold for the use in sportsfloor UFH systems according to the

Tichelmann principle. For connection of Uponor PE-Xa pipes 25x2.3mm

with Uponor Q&E connection technology consisting of:

- 1 manifold (distributor & collector)

- 6 Q&E rings 25

Material: Uponor eval PE-Xa pipes + Uponor PPSU fittings


1046749 40 2036 150Q&E tichelmann manifold end segmentfor sportsfloor UFH 1 set




Uponor eval PE-Xa pipes in straight lengths






has been specially developed to work together with Q&E fitting technology.

Classification of service conditions (including typical field of application):

Application class 4 - Underfloor heating and low temperature radiators,

malfunction temperature 95 °C. Design pressure 6 bar. Application class

5 - High temperature radiators, malfunction temperature 95 °C. Design

pressure 6 bar.


1008939 40 3.7 6 6Uponor eval PE-Xa Q&E pipe40x3.7 mm in straight lengths of 6 m 6 m


Made of PPSU.



1008673 40 6Uponor Q&E PPSU coupling 40-40

1 pcs

Uponor Q&E PPSU elbow 90°

Made of PPSU.



1008683 40 6Uponor Q&E PPSU elbow 90° 40-40

1 pcs





1045464 40 natural 6Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 40 mm 5 pcs





1047867 40 Rp 1 1/4 6Uponor Q&E connection with female thread40-1 1/4 1 pcs

EEI-Int-RHC-01.1286





area.



Uponor conduit


in coils.



50 m


Uponor Radiant Heating/Cooling > Uponor comfort panel

EEI-Int-RHC-01.1288

Uponor Comfort Panel

Your advantages

cooling power up to 92.5 W/m² with 10K under

temperature

Heating power up to 82.5 W/m² with 15 K under

temperature

Compatible with existing metal rail constructions

easy to install

quick installation

concealed installation/integrated in the ceiling structure

easily retrofi tted into existing ceiling structure

excellent for both new buildings and refurbishment

easy to operate

maintenance-free.

System components

Uponor Comfort Panel


Uponor PE-X Pipe 10x1.5


Uponor Dynamic volume fl ow

controller

Manifold / Cabinets

Uponor Slip ConnectorUponor blind panel

Uponor connection MLC

Uponor connection with

female threat

The Uponor comfort panel is a

suspended ceiling system which

can be used for heating and

cooling. The system consist of

thermally activated ceiling

panels which can be installed

fast and easy into conventional

suspended ceiling grids.



b

l h


For cooling and heating of buildings with suspended raster frame ceiling.

For already existing or new raster frames under the ceiling. With optically

sophisticated surface from fleece coated steel sheet. High performance due

to optimised thermal conductivity between surface and integrated pipes,

made of PE-X, with thermal insulation made of mineral fibres.

Cooling capacity 74 W/m² by 8 K temperature difference complies with

EN 14240

Heating capacity 103 W/m² by 15 K temperature difference complies with

EN 14037


1045315 1240 615 23Uponor comfort panel 1250 x 625

1 pcs


1 pcs

b

l h


For cooling and heating of buildings with suspended raster frame ceiling.

For already existing or new raster frames under the ceiling. With optically

sophisticated surface from fleece coated steel sheet. High performance due

to optimised thermal conductivity between surface and integrated pipes,

made of PE-X, with thermal insulation made of mineral fibres.

Cooling capacity 74 W/m² by 8 K temperature difference complies with

EN 14240

Heating capacity 103 W/m² by 15 K temperature difference complies with

EN 14037



1 pcs


1 pcs



Uponor comfort panel - accessories

b

l h

Uponor blind panel

For use in on-site installed suspended raster ceilings. With optically

sophisticated surface from fleece coated mineral faser board, optically fits

exactly to comfort panel.

Colour from below: white

Acoustical absorption (alpha w): 1,00

Acoustical absorption (NRC): 0,95

Building material class according to DIN 4102: A1

Item no. l [mm] w [mm] h [mm] A [m²] Weight [kg] Description unit

1022983 1242 617 18 0.76 2.08Uponor Blind Panel 625dimension 617 x 1242 x 18 16 pcs

1022984 1195 595 18 0.71 1.93Uponor Blind Panel 600dimension 595 x 1195 x 18 16 pcs

b

l h

Uponor blind panel

For use in on-site installed suspended raster ceilings. With optically

sophisticated surface from fleece coated mineral faser board, optically fits

exactly to comfort panel.

Colour from below: white

Acoustical absorption (alpha w): 1,00

Acoustical absorption (NRC): 0,95

Building material class according to DIN 4102: A1


1045319 615 615 18Uponor Blind Panel 625 x 625

32 pcs

1045320 590 590 20Uponor Blind Panel 600 x 600

32 pcs

l

b Uponor blind frame

For use in existing suspended ceiling constructions for optical devision into

a quadratic raster.

Item no. l [mm] w [mm] colour [-] Description unit

1045323 625 24 whiteUponor blind frame 625, white

1 pcs

1045324 600 24 whiteUponor blind frame 600, white

1 pcs

EEI-Int-RHC-01.1290



Uponor PE-X pipe 10 x 1,5 mm

As pipe in coils for connection or extension between 2 comfort panels.

Material: Uponor PEX pipe from high pressure cross-linked polyethylene

Medium: heating/cooling water acc. to VDI 2035 or water-glycol up to

50%

Temperature range: 0 to 60°C

Pressure range: 0 to 6 bar by max. 65 °C

0 to 12 bar by max. 20 °C

Surrounding humidity: up to 90%

Material: plastic


1045327 10 1.5 100Uponor PE-X pipe 10 x 1,5 mm, in coilsbarrier, 10x1,5 coil 100m, 6bar 100 m

b

d

Uponor pipe insert, for 10x1,5 PE-X pipe

Pipe sleeve made of plastic, for plug in PE-X pipe ends,

dimension 10 x 1,5 mm, for stiffening of a pipe in connection area with

Uponor slip-connector.

Item no. w [mm] d [mm] Description unit

1045328 5 7Uponor support sleeve, 10 x 1,5 mm

10 pcs

l

d

Uponor slip-connector

Push-in fitting for connection of more comfort panels together into one

control circuit or to one ceiling panel area.


50%

Temperature range: 0 to 60 °C



Material: plastic

Item no. l [mm] d [mm] Description unit

1045325 45 22Uponor slip-connector equal 10 mm

100 pcs

1022987 60 15Uponor slip connector equal 15 mm

10 pcs

l

d3 d2d1

Uponor slip-connector reduced 15-10 mm

Push-in fitting for connection of more comfort panels together into one

control circuit or to one ceiling panel area.


50%

Temperature range: 0 to 60 °C



Material: plastic

Item no. l [mm] d1 [mm] d2 [mm] d3 [mm] Description unit

1045326 56 32 10 15Uponor slip-connector reduced 15-10 mm

100 pcs

l

d

Uponor Stop plug 15

as end plug 15 mm, for closing of capillary mats ends

Material: nickel-plated brass

Item no. d [mm] l [mm] Description unit

1000296 15 35Uponor stop plug 15

10 pcs




63,9

ø 51

,4

Uponor Diversion Fitting Dim Cu 22 – 4x Dim 10

push-in (CPII Manifold)

Uponor Diversion Fitting Dim Cu 22 – 4x Dim 10 push-in allows the

connection of four series of panels to a MLC 20 mm pipe using an Uponor

Press Adapter MLC 20-22CU (item number 1014558).

Temperature range: 0 – 60°C

Pressure range: 0-6 bar

Material: plastic


1048684Uponor Diversion Fitting Dim. Cu 224x Dim 10 push-in 1 pcs

35

18

ø 10

ø 10

± 0

,1

Uponor Endplug Dim 10 push-in

Uponor Endplug Dim 10 push-in to close an open distribution line from the

Uponor diversion fitting Cu 22 – 4x 10 mm push-in (1048684)

Temperature range: 1 – 60°C

Pressure range: 0-6 bar

Material: plastic


1048685Uponor Endplug Dim 10 push-in

1 pcs

l

d d1

Uponor connection MLC

For connection of 15 mm push-in system to Uponor MLC pipe.

Material: nickel-plated brass, press sleeve

Item no. d [mm] d1 [mm] l [mm] Description unit

1000297 15 16x2.0 70Uponor connectionto MLCP 15-16x2 6 pcs

1000298 15 20x2.25 70Uponor connectionto MLCP 15-20x2.25 6 pcs

d

l

AG

Uponor connection with male threat

for connection of 15 mm push-in system to male threat.


Item no. d [mm] MT ["] l [mm] Description unit

1000299 15 R 1/2 57Uponor connectionwith male threat 15-1/2 MT 6 pcs

1000300 15 R 3/4 57Uponor connectionwith male threat 15-3/4 MT 6 pcs

AG

l

d

Uponor push-in compression adapter

for connection of 15 mm push-in system to female threat.


Item no. d [mm] MT ["] l [mm] Description unit

1000301 15 R 1/2 41Uponor push-in compressionadapter15-1/2 FT 6 pcs

d

l

l1

d1

Uponor connection elbow

for connection of 15 mm push-in system to Uponor MLC pipe, in 90°

version.

Material: nickel-plated brass, press sleeve

Item no. d [mm] d1 [mm] l [mm] l1 [mm] Description unit

1000303 15 16x2 45 48Uponor connection elbow to UponorMLC pipes, 15-16x2 6 pcs

1000304 15 20x2.25 45 48Uponor connection elbow to UponorMLC pipes, 15-20x2,25 6 pcs

EEI-Int-RHC-01.1292



Uponor locking ring 15

for capillary pipe 15 mm push-in fitting. Ensures the coupling against

unintended (unbeabsichtigtes) solutions of push-in connection.

Material: polypropylene


1000310 15Uponor locking ring 15

10 pcs

Uponor ball valve

For closing of cooling and heating areas and supply pipes.


50%

Temperature range: -10 to + 110 °C

Pressure range: 0 to 10 bar



Item no. l [mm] FT ["] Description unit

1022985 50 G 1Uponor ball valvedimension 1 FT - 1 FT 1 pcs

1022986 50 G 3/4Uponor ball valvedimension 3/4 FT - 3/4 FT 1 pcs

Uponor reduction

Reducer from 3/4 MT to 1/2 FT by use of tees for supply and return MLC

pipes from dimension 40 x 4 mm

Material: brass

Item no. FT ["] MT ["] Description unit

1022988 Rp 1/2 G 3/4Uponor reductiondimension 1/2 FT - 3/4 MT 10 pcs

Dynamic volume flow controller

For hydraulic control of heating and cooling loops, or zones and indvidual

control over integrated valve insert in combination with thermla actuator.

Item no. DN [mm] Description unit

1042942 15Dynamic volume flow controllerAB-QM DN 15, flow rate 55 - 275 L/H 1 pcs

1042943 20Dynamic volume flow controllerAB-QM DN 20, flow rate 180 - 900 L/H 1 pcs

1042944 25Dynamic volume flow controllerAB-QM DN 25, flow rate 340 - 1700L/H 1 pcs

1042945 32Dynamic volume flow controllerAB-QM DN 32, flow rate 640 - 3200L/H 1 pcs

Screw connection for AB-QM

Screw connection Inclusively flat sealing

Item no. Type [-] Description unit

1044809 15Screw connection for AB-QM 3/4 MT

1 pcs

1044810 20Screw connection for AB-QM 1 MT

1 pcs

1044811 25Screw connection for AB-QM 1 1/4 MT

1 pcs

1044812 32Screw connection for AB-QM 1 1/2 MT

1 pcs


[l/h] stroke [mm] [-]

90-450 2.25 G 3/4" A

180-900 2.25 G 1" A

340-1700 2.25 G 1 1/4" A

640-3200 2.25 G 1 1/2" A

FT ["] MT ["]

Rp 3/4" R 1/2"

Rp 1" R 3/4"

Rp 1 1/4" R 1"

Rp 1 1/2" R 1 1/4"



Thermal actuator TWA -Z NO

For control of pressure indipendent volume flow controller - openes when

idle.

Item no. Type [-] [-] Description unit

1042946 TWA-Z NOThermal actuator TWA -Z NO

1 pcs

Thermal actuator TWA -Z NC

For control of pressure indipendent volume flow controller - closes when

idle.

Item no. Type [-] [-] Description unit

1042947 TWA-Z NCThermal actuator TWA -Z NC

1 pcs

l

l1

h

Uponor room temperature controller H/C

Concealed device, protects cooling surface from condensation. The TR

2/3 (concealed device) can both to control one valve (heating or cooling)

and also be switched over internally to control thus 2 valves (heating

and cooling). With an option of external setpoint remove access will it

be introduced in two-line (heating and cooling) and three-line systems

(heating and cooling). The actual operation status (heating/cooling/

dew point warning) will be show on device by means of light diods. For

simplification of wiring and installation of room temperature are switch

boxes shall be provided.

Operational voltage: 24 V / 50-60 Hz

Control range: 5-30 °C

Switching hysteresis: 1 K

Temperature sensor: NTC

Switch outlet: Triac, 24 V/1 A, short-term up to 2,5 A

Functions:

Heating or cooling

Heating or cooling with switchover

Heating and/or cooling with setpoint remot access

Installation site: concealed under plaster, fits into UP-Doses acc. to

DIN 49073

Installation depth: 28 mm

Colour: RAL 9010, pure white

Item no. l [mm] l1 [mm] h [mm] Description unit

1000311 71 70 28Uponor room thermostatTR 2/3 1 pcs

EEI-Int-RHC-01.1294



Uponor dew point sensor

For plastered ceilings or walls / pipe installation, detects a potential

condensation arising on the pipe or in the immediate vicinity by changing

its electrical resistance. This change of resistance in the sensor is detected

by room thermostat TR 2/3, which closes control valve and effectively

protects the cooling surface from condense damage.

The dew point sensor TF 3 PR is designed for installation in plastered

ceilings (P) and for cold-water pipe conduits (R).

Installation site: plastered ceilings/walls or pipe installations


1000312 70 20 7Uponor dew point sensorTF 3 PR 1 pcs

Uponor dew point sensor

For gypsum plasterboard ceilings / suspended metal ceilings, detects a

potential condensation arising on the pipe or in the immediate vicinity by

changing its electrical resistance. This change of resistance in the sensor

is detected by room thermostat TR2/3, which closes control valve and

effectively protects the cooling surface from condense damage.

The dew point sensor TF 3 GM is designed for installation in gypsum

plasterboard ceilings/walls (G) and for suspended metal ceilings (M).

Installation site: gypsum plasterboard ceilings/walls or suspended metal

ceiling


1000313 70 20 7Uponor dew point sensorTF 3 GM 1 pcs

l

b h Uponor dew point converter

Evaluates the information received from the corresponding dew point

sensor. The integrated contact is activated when the dew point is reached.

This information can be used, for example, for remote communications with

an onsite central building control system or similar device. Up to five dew

point sensors can be assigned to each converter.

Operating voltage: 24 V / 50-60 Hz

Switch outlet: potential free switch over contact max. load capacity of the

outlet: 48 V~/60 V DC

Installation site: automation cabinet or electric manifold installation


1000314 85 36 60Uponor dew-point converterTK 1 PF 1 pcs


Uponor Radiant Heating/Cooling > Uponor gypsum panel

EEI-Int-RHC-01.1296

Uponor Gypsum Panel is the

ideal system for heating and

cooling. The moderate temper-

ature of the water feeds the

radiant system makes it partic-

ularly suitable to be combined

with condensing boilers, heat

pumps, solar panels and other

alternative sources of energy.

Your advantages

quick and easy to install

for new buildings and renovation

high comfort

fast response time

completely silent (no fan noise).

System components

Uponor Gypsum Panel


Uponor PE-Xa

pipe

9,9 x 1,1


Uponor PE-Xa pipe

20x2

Manifold / Cabinets

Uponor compression

Adapter

Uponor PE-Xa Q&E

Coupling

Uponor PE-Xa Q&E tee

reducer 20x9.9x20

Uponor PE-Xa Pipe 9.9x1.1

expander

Uponor PE-Xa Q&E jointing

reducer 20x9.9

Uponor Gypsum Panel

Uponor Gypsum panel

passive

velta P�-�

a


Uponor gypsum panel

Uponor gypsum panel

Radiant panel for heating and cooling applications. Consisting of a gypsum

board (15mm), Uponor eval PE-Xa pipe 9.9x1.1 mm and 27mm of EPS

200 (30 kg/m³).

Uponor gypsum passive panel has the same layout as the active panels but

consists no pipes.

Sizes: 2000x1200mm, 1000x1200mm, 500x1200mm.


1047319 42 2000 1200 2.40Uponor gypsum panel 2000x1200 Type 2

1 pcs


1 pcs


1 pcs

Uponor gypsum panel passive

Uponor gypsum panel passive has the same layout as the active gypsum

panels (item no. 1047319-21) but contains no pipes.

Size: 2000x1200mm


1020506 42 2000 1200 2.40Uponor gypsum panel passive 2000x1200

1 pcs

Uponor gypsum panel - accessories

Uponor PE-Xa pipes











Uponor PE-Xa Q&E coupling 9.9

For Uponor PE-Xa pipe 9.9 x 1.1 mm, consisting of:

- 1 coupling







For Uponor PE-Xa pipes 9.9 x 1.1 mm, made of brass.





Uponor gypsum panel - accessories

Uponor PE-Xa Q&E jointing reducer 20x9.9


Item no. d [mm] d1 [mm] Description unit

1020518 9.9 20Uponor PE-Xa Q&E jointing reducer 20 x 9.9incl. 1 PEX ring 9.9 and 1 PEX ring 20 5 pcs

Uponor PE-Xa Q&E tee reducer 20x9.9x20


Item no. d [mm] d1 [mm] d2 [mm] Description unit

1020524 20 9.9 20Uponor PE-Xa Q&E tee reducer 20 X 9.9 X 9.9incl. 1 PEX ring 9.9 and 2 PEX rings 20 5 pcs





1042836 20 natural 6+10Uponor Q&E ring natural with stop edgeUponor PE-Xa dim 20 mm 20 pcs

Uponor PE-X ring for PE-Xa pipes

For Uponor Minitec PE-Xa pipe 9.9 x 1.1 mm; to secure fixing to Minitec

fittings




EEI-Int-RHC-01.1298

Uponor Radiant Heating/Cooling > Uponor tools

Uponor tools

Uponor pipe cutter up to 25 mm

For Uponor pipes, outside diameter up to 25 mm.


1001369 - 25Uponor pipe cutter for PEX14-25mm 1 pcs

Uponor pipe cutter up to 20

For Uponor pipes, outside diameter up to 20 mm with corrugated pipe

cutting device.


1006636 - 20Uponor pipe cutter 14-20 mm

1 pcs

1006637Uponor spare bladefor pipe cutter 1006636 1 pcs

Uponor cutting aid

For the easy cutting of Uponor pipe fixing system panels.


1016724Uponor cutting tool for pipe positioning panel 14-16mmwith insulation 1 pcs

Uponor polystyrene cutter tool for lightweight system

For cutting of individual pipe curves and guides. And also for the smooth

cutting to size of polystyrene items. 230 V connection.

Item no. OV [V] Description unit

1006290 230Uponor polystyrene cutting toolfor lightweight system 1 pcs

Uponor outside bending spring MLC

Special bending spring for Uponor MLC pipe.


1006639 14Uponor bending spring outside MLC 14

1 pcs

1006640 16Uponor bending spring outside MLC 16

1 pcs



Uponor tools

Uponor manual pressing tool MLC

For pressing of Uponor press fittings MLC 14-20 mm in conjunction with

exchangeable inserts. Supplied in case without exchangeable inserts.


1015764 14-20Uponor manual press tool MLC 14-20incl. case without pressing inserts 1 pcs

Uponor manual pressing tool inserts MLC

For inserting into the manual pressing tool for pressing the Uponor press

fittings MLCP 14/16/18/20 mm.


1015776 14Uponor manual press tool insert MLC 14

1 set


1 set


1 set

Uponor press tool electric UP 75

Supplied in plastic case for the 230 V mains connection, without pressing

jaws. Range of application up to 110 mm.

Technical Specifications:

Weight of the pressing tool: 3.30 kg

Nominal voltage: 230 V DC / 50 Hz

Nominal capacity: 200 Watt

For dimensions: up to 110 mm

Press power: ca. 32 kN

Press duration: ca. 7 sec.

Item no. d [mm] OV [V] Description unit

1007082 - 110 230Uponor electric pressing tool UP 75 ELwithout pressing jaws 1 pcs

Uponor PE-Xa pipe 9.9x1.1 expander

Hand tool for the easy expansion of Uponor PE-Xa pipes 9.9 x 1.1 mm,

consisting of:

- 1 hand expander

- 1 expander head for PE-Xa pipe 9.9 x 1.1 mm

- 1 tube of lubricant

- 1 case


1006247Uponor PE-Xa pipe 9.9 x 1.1 expandertool 1 set

EEI-Int-RHC-01.12100


Uponor tools

Uponor Q&E battery tool M12

Battery powered expander tool for 6 bar pipes up to dimension 32mm and

for 10 bar pipes up to 28 mm.

Auto-rotating with M12 expander heads.

< 10seconds full expansion onto a joint

< 2.2kg with head and battery

Steel gear and integrated metal frame

LED work light, fuel gauge, Tool free head change

incl. 2 Li-ion 1.5 Ah batteries, charger 220-240V/50-60Hz and grease

(Mo)


1057166Uponor Q&E M12 expanderwith 6 bar heads 16-20-25 1 set

Uponor Q&E battery tool M18

Battery powered expander tool for 6 bar pipes up to dimension 40mm and

for 10 bar pipes up to 32 mm.

Auto-rotating with M18 expander heads.

< 10seconds full expansion onto a joint.

< 2.2kg with head and battery

Steel gear and integrated metal frame

LED work light, fuel gauge, Tool free head change

incl. 2 Li-ion 1.5 Ah batteries, charger 220-240V/50-60Hz and grease

(Mo)


1057169Uponor Q&E M18 expanderwith 6 bar heads H20-H25-H32 1 set

Uponor Q&E M12 expander heads

Q&E head for NKB fittings, for M12 and M18 tools.

Expander head packed screw pack

Item no. d [mm] stroke [mm] p [bar] Description unit

1057184 15 14 10Uponor Q&E M12 expander head14/15x2.5 mm 1 pcs

1057185 18 14 10Uponor Q&E M12 expander head17/18x2.5 mm 1 pcs


Q&E head for S5 fittings, for M12 and M18 tools.



1057172 16 14 6+10Uponor Q&E M12 expander head16x1.8/2.0/2.2 mm 1 pcs

1057173 20 14 6Uponor Q&E M12 expander head20x1.9/2.0 mm 1 pcs

1057175 25 14 6Uponor Q&E M12 expander head25x2.3 mm 1 pcs


stroke [mm] p [bar]

14 6

stroke [mm] p [bar]

25 6


Uponor tools


Q&E head for S5 fittings, for M18 tools.



1057178 20 25 6Uponor Q&E M18 expander headH20x1.9/2.0 mm 1 pcs

1057180 25 25 6Uponor Q&E M18 expander headH25x2.3 mm 1 pcs

1057183 40 25 6Uponor Q&E M18 expander headH40x3.7 mm 1 pcs

Uponor Q&E M12 battery

Q&E M12 rechargeable Li-ion battery for M12 tool.

Battery 1.5 AH


1057409Uponor Q&E battery M121.5 AH 1 pcs

Uponor Q&E M12 charger

Q&E M12 charger for M12 tool

Charger 220-240V / 50-60Hz

Item no. OV [V] Description unit

1057410 230Uponor Q&E charger M12220-240V 1 pcs

Uponor Clip Stapler

High-precision, wear-proof tool for pinning with staples in magazines, with

curved magazine.


1002295Uponor Clip stapler

1 pcs



Uponor tools

Uponor manual roller

For sticking down of insulation sections and edges, takes a roll of tape.


1000142Uponor manual roller

1 pcs

Uponor Q&E head graphite paste

Colloidal graphite paste. For Uponor Q&E Tools.


1008334Uponor graphite paste for Uponor plierscolloidal graphite paste, 30 g/tube 20 pcs

Uponor Twisting tool

For twisting of the tying wires while fixing the pipe on steel meshes.


1006243Twisting tool for tying wire

1 pcs

Uponor cutter knife

Cutter knife for polystyrene insulation.


1006263Uponor polystyrene cutter knife

1 pcs

Uponor ring spanner wrench

For swivel nut of the Uponor compression adapters

Item no. A/F [mm] Description unit

1006265 30Uponor ring spanner wrenchfor wrench size 30 mm 1 pcs

Uponor door pipe duct

Expansion rod with pipe laying mount


1007179Uponor door pipe guide

1 pcs



Uponor tools

Uponor plastic manifold valve tool

For mounting and de-mounting the valves of the plastic manifold.


1009216Uponor plastic manifold valve tool

1 pcs

Uponor Tying tool


1034533Twisting tool for tying wire

1 pcs

Uponor pipe uncoiler with pipe guide

For laying of all Uponor pipes up to dimension 25 mm. Suits different pipe

coils with 300 mm and 600 mm internal diameter.


1035807Uponor pipe uncoiler with pipe guide

1 pcs

Uponor snow and ice decoiler

Uponor snow and ice melting, pipe decoiler.


1033691Uponor Meltaway decoilerfor 25 x 2,3 mm pipe 1 pcs


International sales and delivery terms

Uponor Radiant Heating/Cooling > International sales and delivery terms

1 Interpretation

2 Basis of the sale

3 Orders and specifications

4 Price of Goods

5 Terms of payment

6 Delivery and Performance


International sales and delivery terms

Uponor Radiant Heating/Cooling > International sales and delivery terms

7 Risk and property

8 Liability

9 Insolvency of Buyer

10 Packing

11 General


Uponor Radiant Heating/Cooling > Item search register

Item search register

Item no. unit Page

1000002 m² 23

1000003 m² 23

1000012 pcs 20

1000015 m² 23

1000016 pcs 40

1000017 m² 23, 33

1000018 m 24

1000019 pcs 24

1000079 m 39

1000080 m 39

1000081 m 39

1000082 pcs 39

1000083 pcs 40

1000084 l 40

1000085 l 41

1000138 pcs 59

1000142 pcs 103

1000296 pcs 91

1000297 pcs 92

1000298 pcs 92

1000299 pcs 92

1000300 pcs 92

1000301 pcs 92

1000303 pcs 92

1000304 pcs 92

1000310 pcs 93

1000311 pcs 94

1000312 pcs 95

1000313 pcs 95

1000314 pcs 95

1000502 pcs 52

1000503 pcs 52

1000504 pcs 52

1000505 pcs 52

1000515 pcs 54

1000516 pcs 66

1000517 pcs 66

1000518 pcs 54

1000527 pcs 53

1000529 pcs 54

1000531 pcs 56

1000533 pcs 56

1000535 pcs 57

1000536 pcs 57

1000537 pcs 59

1000538 pcs 53

1000539 pcs 57

1001369 pcs 99

1002295 pcs 102

1002296 pcs 23

1002297 pcs 23

1002356 pcs 66

1002357 pcs 66

1005049 m² 12, 33, 40

1005066 l 41

Item no. unit Page

1005084 m² 33

1005087 m² 33

1005100 set 46

1005168 pcs 47

1005170 pcs 47

1005261 m² 9

1005263 pcs 9, 37, 98

1005264 pcs 9, 36, 97

1005265 pcs 9, 37, 97

1005266 pcs 46

1005267 m 10

1005268 m 10

1005269 pcs 10, 40

1005274 m 10, 36

1005284 pcs 85

1005286 pcs 85

1005287 pcs 33, 74, 81

1005289 pcs 74

1005290 m 73, 81

1005291 pcs 73, 81

1005295 pcs 72, 82

1005296 pcs 72, 82

1005297 pcs 72, 82

1005298 pcs 72, 82

1005358 m 73

1005372 pcs 74, 81

1005477 m² 15

1005478 m² 15

1005479 m 15

1005480 m 15

1005481 m 16

1005482 pcs 16

1005483 m 16

1005484 m 16

1005485 m² 12

1005486 pcs 12

1005498 m 24

1005576 pcs 68

1005605 pcs 61

1005675 set 68

1006243 pcs 103

1006247 set 100

1006263 pcs 103

1006265 pcs 103

1006290 pcs 99

1006636 pcs 99

1006637 pcs 99

1006639 pcs 99

1006640 pcs 99

1006641 pcs 46

1007082 pcs 100

1007179 pcs 103

1007226 m² 20

1007228 m² 20

1007232 m² 20

Item no. unit Page

1007234 m² 20

1008334 pcs 103

1008671 pcs 72, 84

1008673 pcs 86

1008683 pcs 86

1008932 pcs 72

1008939 m 86

1009004 pcs 48

1009006 pcs 74, 82, 87

1009129 pcs 38

1009132 pcs 38

1009209 set 44

1009214 set 44

1009215 set 44

1009216 pcs 104

1009217 pcs 44

1009222 pcs 33, 74, 82

1009226 m 17, 25, 34

1009227 m 17, 25, 34

1009228 m 25, 34, 36

1009230 m 25,34,36,72,97

1009231 m 25,34,36,72,97

1009233 pcs 48, 74

1012869 m 74, 82, 87

1013005 pcs 60

1013006 pcs 61

1013008 pcs 59

1013051 pcs 45

1013052 pcs 45

1013053 pcs 45

1013054 pcs 45

1013055 pcs 45

1013056 pcs 45

1013057 pcs 45

1013058 pcs 45

1013059 pcs 45

1013060 pcs 45

1013061 pcs 45

1013062 pcs 45

1013063 pcs 45

1013064 pcs 45

1013065 pcs 45

1013066 pcs 45

1013067 pcs 45

1013068 pcs 45

1013069 pcs 45

1013070 pcs 45

1013071 pcs 45

1013072 pcs 45

1013127 m 24

1013366 m 13, 18, 26, 31

1013371 m 18, 26, 31

1013378 m 18, 26, 31

1013380 m 18, 26, 31

1013392 m 26




Item no. unit Page

1014122 pcs 47

1015154 pcs 13, 18, 26, 31

1015164 pcs 18, 21, 26, 31

1015187 pcs 26

1015764 pcs 100

1015776 set 100

1015777 set 100

1015780 set 100

1016699 m² 28

1016700 m² 29

1016701 m² 29

1016702 m² 30

1016703 m² 28

1016724 pcs 99

1020506 pcs 97

1020518 pcs 37, 98

1020524 pcs 37, 98

1022341 m 78

1022983 pcs 90

1022984 pcs 90

1022985 pcs 93

1022986 pcs 93

1022987 pcs 91

1022988 pcs 93

1023006 pcs 73

1023007 pcs 73, 84

1023008 pcs 73, 84

1023011 pcs 73

1023012 pcs 73, 84

1023013 pcs 73, 84

1023448 m 72, 84

1030134 pcs 76

1030135 set 76

1030580 pcs 43

1030581 pcs 43

1030582 pcs 43

1030583 pcs 43

1030584 pcs 43

1030585 pcs 43

1032701 set 46

1032702 set 44

1033024 m 9, 36

1033025 m 9, 36

1033026 m 9, 36

1033625 m 78

1033626 m 78

1033628 m 79

1033629 m 79

1033630 m 79

1033631 pcs 78

1033632 pcs 78

1033633 pcs 78

1033634 pcs 79

1033635 pcs 79

1033636 pcs 79

Item no. unit Page

1033637 pcs 78

1033638 pcs 78

1033639 pcs 78

1033640 pcs 78

1033641 pcs 78

1033642 pcs 78

1033643 pcs 78

1033644 pcs 79

1033645 pcs 78

1033646 pcs 79

1033647 pcs 78

1033648 pcs 79

1033649 pcs 79

1033650 pcs 79

1033652 pcs 80

1033653 pcs 80

1033654 pcs 80

1033657 pcs 80

1033659 pcs 80

1033660 pcs 80

1033661 pcs 80

1033662 pcs 80

1033663 pcs 80

1033666 pcs 81

1033667 pcs 81

1033668 pcs 81

1033672 pcs 79

1033673 pcs 81

1033675 pcs 81

1033676 pcs 81

1033678 pcs 79

1033689 pcs 82

1033691 pcs 104

1033975 pcs 48

1034533 pcs 104

1034535 m 17, 25, 34

1035807 pcs 104

1042389 pcs 18, 21, 26, 31

1042420 set 43

1042471 set 43

1042836 pcs 79, 98

1042837 pcs 26, 34, 37

1042840 pcs 73, 84

1042942 pcs 93

1042943 pcs 93

1042944 pcs 93

1042945 pcs 93

1042946 pcs 94

1042947 pcs 94

1044181 pcs 33

1044809 pcs 93

1044810 pcs 93

1044811 pcs 93

1044812 pcs 93

1045315 pcs 89

Item no. unit Page

1045316 pcs 89

1045317 pcs 89

1045318 pcs 89

1045319 pcs 90

1045320 pcs 90

1045323 pcs 90

1045324 pcs 90

1045325 pcs 91

1045326 pcs 91

1045327 m 91

1045328 pcs 91

1045464 pcs 86

1045562 set 51

1045565 pcs 51

1045568 pcs 52

1045570 pcs 53

1045571 pcs 54

1045572 pcs 53

1045813 set 75

1045814 set 75

1045815 set 75

1045816 set 76

1046114 pcs 52

1046115 pcs 52

1046747 set 85

1046748 set 85

1046749 set 85

1046870 pcs 68

1046991 pcs 48

1046992 pcs 48

1046993 pcs 48

1046994 pcs 48

1046996 pcs 49

1046997 pcs 49

1046998 pcs 49

1046999 pcs 49

1047000 pcs 48

1047319 pcs 97

1047320 pcs 97

1047321 pcs 97

1047610 m 17, 25, 30

1047611 m 17, 25, 30

1047612 m 17, 25, 30

1047615 m 72, 84

1047618 m 72, 84

1047624 m 21

1047625 m 21

1047844 pcs 64

1047845 pcs 65

1047846 pcs 65

1047847 pcs 66

1047848 pcs 66

1047867 pcs 86

1048010 pcs 56

1048011 pcs 58




Item no. unit Page

1048012 pcs 58

1048013 pcs 59

1048249 m 21

1048290 m 12, 17, 25, 30

1048291 m 12, 17, 25, 30

1048395 m 21

1048684 pcs 92

1048685 pcs 92

1048763 pcs 66

1048780 pcs 69

1048781 pcs 69

1048782 pcs 70

1048783 pcs 70

1052123 pcs 80

1056656 pcs 80

1057166 set 101

1057169 set 101

1057172 pcs 101

1057173 pcs 101

1057175 pcs 101

1057178 pcs 102

1057180 pcs 102

1057183 pcs 102

1057184 pcs 101

1057185 pcs 101

1057368 pcs 47

1057370 pcs 47

1057409 pcs 102

1057410 pcs 102

1057441 pcs 47

1057442 pcs 47

1058089 pcs 47

1058090 pcs 47

1058091 pcs 47

1058092 pcs 47

1058422 pcs 60

1058423 pcs 60

1058424 pcs 61

1058425 pcs 61

1058426 pcs 60

1058427 pcs 60

1058428 pcs 13, 18, 26, 31

1058429 pcs 18, 26, 34

1058659 pcs 13, 18, 26, 31

1058660 pcs 18, 21, 26, 31

1058661 pcs 18, 26, 34

1058668 pcs 26, 34



Notes

How to contact us


Customer Service Center T + 49 (0)9521-690-370

F + 49 (0)9521-690-750

E [email protected]

Technical assistance T +49 (0)9521-690-739 or 834

F +49 (0)9521-690-750

E [email protected]

Export Department T +49 (0)9521-690-370

F +49 (0)9521-690-750

E [email protected]

We reserve the right to make technical amendments and carry out updates.

Uponor – partnering with professionals

Uponor is a leading supplier of plumbing and heating systems for the

residential and commercial building markets across Europe and North

America, and a market leader in municipal infrastructure pipe systems in

the Nordic countries. Uponor's key applications include indoor climate

and plumbing systems.

Uponor International Sales takes care of all business activities in the

Balkans, Western, Central and East Asia, Africa and Latin America.

Uponor. Simply more.

01/

20

12

– S

ub

ject

to

mo

difi c

ati

on

s

Uponor GmbH

P.O. Box 1641

97433 Hassfurt

Germany

T +49-(0)9521 690 0

F +49-(0)9521 690 750

E [email protected]

W www.uponor.com/international

Documents

Uponor Radiant Heating/Cooling katalog UFH-C 2012 eng.pdf · 6 EEI-Int-RHC-01.12 Radiant heating and cooling systems - for all areas of application the right system Radiant heating