4040 SE International Way, Suite 204, Portland, OR 97222-8864(971) 206-0017 Fax (971) 206-0019 www.pahlindustrial.com

AMEA & USPAP Certified Appraisers

UPON INSTRUCTIONS FROM THE SECURED CREDITOR

Infeedwestern pneumatIcs fInger joInter - Lyons

payout tabLe

2 AUCTIONS Voluntary Liquidation

SHERIDAN

TUES. DEC. 4-11AM

LYONS

THURS. DEC. 6-8AMSHERIDAN

TUES. DEC. 4-11AM

LYONS

THURS. DEC. 6-8AM

mId VaLLey forest products, LLcsHerIdan, oregon (pages 2-3) Lyons, oregon (pages 4-8)

• CHIP PLANT • SAWMILL • PLANER MILL • RE-MAN • FINGER JOINTER •

cat 988b

SHERIDAN, OREGON • DECEMBER 4TH - 11 AM

De-Barker: 1988 Nicholson A-5 22” ring debarker s/n 5762

Chippers: Nicholson 6 knife 96” diameter horizontal infeed drop discharge whole log chipper p/w twin 400hp 1170 RPM ODP motors s/n 52655R

Chip Screen: BM & M 8’ X 16’ double deck chip screen

Chip Bins: twin 30 unit chip bins c/w top distribution auger c/w common hydraulic power pack • 30 unit hog bin on stand c/w hydraulic power pack • 10 unit chip surge bin c/w dual auger conveyor on stand

Hogs: Williams 24 X 36 hammer hog p/w 200hp 1170RPM motor s/n 13640 • Schutte knife hog p/w 50hp motorElectrical: All electrical wiring throughout plant • Main disconnect • 6 bank MCC

TERMS OF SalE

Payment: Full Payment for Buyers must be made by Friday December 7, 2012 at 5:00 PM. A 25% deposit must be made by close of business the day of sale. We accept Visa, Mastercard, Cash, Cashiers Check, Wire Transfer, or Company Check accompa-nied with a Bank Letter of Reference. Absentee bids require a 25% deposit.

Removal: No removal of any item until paid in full. No removal of equipment on auction day unless otherwise announced by the auctioneer on auction day. Final removal to be made no later than Monday, December 31, 2012 at 5:00 PM, or by previous arrangement with Pahl Industrial.

General: Announcements made by the auctioneer on auction day take precedence over all printed matter. Auctioneer reserves the right to sell accessories, parts or attachments on a separate or aggregate basis. The auction brochure and lot by lot catalogs are a guide only, assets are subject to additions or deletions Auctioneer has attempted to describe the equipment as accurately as possible. Please inspect equipment prior to bidding. All items sold “as is, where is”. A 10% Buyers Premium will apply on all purchases, 14% Buyers Premium on credit card purchases.

nIcHoLson debarKer

MID VALLEY FOREST PRODUCTS22111 NW Chip Yard RoadSheridan, Oregon 97378

TUESDAY, DECEMBER 4TH 11AMPREVIEW AND INSPECTION

8AM TO SALE TIME DAY OF SALE

SITE PHONES208-741-1743 • 503-807-6380

Main St.

Salmon River Hwy

18

From: McMinville (20 miles)and Portland (50 miles)

From: Lincoln City& Oregon Coast (40 miles)

From: Salem (34 miles)22

2211 NW Chip Yard RoadSheridan, OR 97378

18

N

for onLIne Internet bIddIng go to www.paHLonLIne.com

d 8 catnIcHoLson cHIpper

SHERIDAN, OREGON • DECEMBER 4TH - 11 AM

Loaders: Cat 988B log loader c/w weldco grapple s/n 50W614 • Cat 988B log loader c/w grapple s/n 87A 2968 • Terex 72-71B log loader c/w grapple s/n 67016 • Koehring log loader with Pierce Pacific boom • John Deere 892 DLC log loader c/w Young heel boom

Dozer: Cat D8H crawler tractor bare back u blade s/n 46A 28981 Crane: Pettibone 12.5 ton ton crane

Compressors: Quincy QS1 245 compressor, 24,486hrs s/n 99586

Transfers/Conveyors/Rollcases: 6 chain X 40’ transfer deck frame c/w steel support structure and chain conveyor frame • 6 chain X 30’ HD82 transfer deck c/w SKK drive • Chain conveyors: 2 - H110 X 100’, H110 X 75’, H110X 50’, H110X 30’, H78 X 75’ incline, H480 X 50’, H480 X 35’ • Belt conveyors - 54” X 40’, 30” X 60’ incline, 48” X 25’, 36” X 60’, 36” X 30’, 18” X 30’ • 12” X 30’ radial stacking conveyor

Miscellaneous Equipment: Hydraulic Power Packs: Quad 50hp power pack • B & T twin 60hp • log trailer loader • Hydraulic log splitter c/w 4 chain X 10’ H78 transfer deck on stand • Kenworth t/a dump truck • White t/a tractor 10 speed • Operators booth • air receivers • Steel sub structure of mill • Rite Lite portable light tower on S/A carrier • Allis Chalmers, Perkins & Cummins engines • 2 – large tanks • Spare pulleys, gear boxes, fuel tanks, etc.

U BLADEU BLADE

12.5 TON12.5 TON

cHIp bIns cHIp screen wILLIams Hog

KoeHrIng LoaderpettIbone crane

QuIncy compressor

HItacHI eX270 Lc-5 Log Loader

LYONS, OREGON • DECEMBER 6TH - 8 AM

dismantled sawmill equipment: Newnes ED-04-29 optimizing edger 4” X 36”, top arbor, 4 saw, 21’, s/n 92-449 c/w 20’ overhead positioning infeed table w/ drop skid, sharp chain, press rolls, pin stops & 25’ angled ending roll-case • Newnes TA-24RH-34 optimizing line shaft trimmer, 12 - saw, 40 HP, 23’ pass through 20’ cut, s/n 88-246-P • 2 – Newnes Automation 24’ scan-ners, unscramblers, transfer decks, conveyors, spiral rolls, electrical/motors/reducers, etc. • Irvington-Moore 30 bin J-bar carrier lumber sorting system c/w frame, decking, hydraulics, etc. • Newnes 24’ sticker stacker w/ 6 maga-zine automatic stick placer c/w lumber unscramble, rollcase, etc. • Acrowood 6120 slant disc chipper • Nicholson 48” chipper, 8 knife • Can Car 54” horizontal infeed vertical discharge chipper • 40 HP chipper (Blueprints available for all dismantled equipment please call for more info.)sawmill: Klamath 6’ twin band mill log processor line c/w twin slabber heads p/w 150hp motors, ASM sharp chain infeed system, control booth, sub struc-ture, etc. (partially installed) • 4 - saw scrag line w/ 2 chipping heads p/w 75hp chipping, 100hp saws, linear positioned sharp chain infeed c/w operator cab, outfeed auto tailing rollcase, etc. • Salem 6” X 36” edger, 4 saw, bottom arbor, p/w 150hp motor, linear positioned, c/w jump chain infeed & spiral outfeed roll-case • Powell 6” X 18” top arbor gang edger p/w 150 hp motor c/w infeed & outfeed rollcases • Ukiah 8” X 30” bottom arbor gang edger p/w 2-200hp mo-tors c/w jump chain infeed rollcase & moveable line bar and outfeed rollcase • Morgan trimmer, 7 – chain, 2 – saw, c/w transfer to electro mechanical tilt

TERMS OF SalE

Payment: Full Payment for Buyers must be made by Friday December 7, 2012 at 5:00 PM. A 25% deposit must be made by close of business the day of sale. We accept Visa, Mastercard, Cash, Cashiers Check, Wire Transfer, or Company Check accompa-nied with a Bank Letter of Reference. Absentee bids require a 25% deposit.

Removal: No removal of any item until paid in full. No removal of equipment on auction day unless otherwise announced by the auctioneer on auction day. Final removal to be made no later than Monday, December 31, 2012 at 5:00 PM, or by previous arrangement with Pahl Industrial.

General: Announcements made by the auctioneer on auction day take precedence over all printed matter. Auctioneer reserves the right to sell accessories, parts or attachments on a separate or aggregate basis. The auction brochure and lot by lot catalogs are a guide only, assets are subject to additions or deletions Auctioneer has attempted to describe the equipment as accurately as possible. Please inspect equipment prior to bidding. All items sold “as is, where is”. A 10% Buyers Premium will apply on all purchases, 14% Buyers Premium on credit card purchases. For online internet bidding go to www.pahlonline.com.

poweLL 6” X 10” gang edger

MID VALLEY FOREST PRODUCTS171 18th St

Lyons, Oregon 97358

THURSDAY, DECEMBER 6TH 8AMPREVIEW AND INSPECTIONWED DEC 5TH 9AM-5PM

(or by appointment)

SITE PHONES208-741-1743 • 503-807-6380

Main St.

N. Santiam Hwy

From: Detroit Lake (26 miles)and Sisters (86 miles)

From: I-5 & Salem (25 miles)

From: Albany (33 miles)

22

171 18th StreetLyons, Oregon 97358

N

22

226

newman m712 pLanerHyster H250H forKLIft

hoist & 3 - chain X 7’ infeed • Irvington Moore 62 precision end trimmer • Murco 58” horizontal in drop discharge p/w 250 hp motor • 6’ X 6’ suspended vibratory chip screen • Sticker Stacker consisting of 5 chain X 30’ H82 transfer, 4 ARM electro mechanical tilt hoist, infeed transfers, 6 magazine auto feed stick placer, 5 chain X 30’ H82 outfeed transfer, etc.

Planer Mill / Re-Man: Newman M712 planer, 12 – knife, 8” X 16” c/w profile heads, 70hp top head / 25 side / 35 profile heads c/w M455 infeed table & 2 - slow down belts • Albany 24’ me-chanical lift trimmer • Large quantity of planer & profile heads, knives, spare parts, etc. • Packaging building c/w 4 chain X 30’ jump transfer w/ 6 roll rollcase, 8 roll infeed rollcase c/w adjust-able end squeeze frame, USS wire tie, 9 roll outfeed rollcase, etc. • End squeeze for packaging machine c/w 17 - roll rollcase • Stud end c/w ending rolls, 2 chain transfer to 2 arm stacker w/ outfeed rollcase • McDonough 54” resaw p/w 75hp motor, c/w feed rolls, infeed rollcase & outfeed belt conveyor • Weinig R936 profile grinder • Wadkin profile grinder s/n NH404 • Han-chet DN40 knife grinder s/n 9017P

Finger Joint Plant: (2) - Western Pneumatics fully hydraulic short block conversion finger jointers - 1 – Model: FJ 1542-2SD c/w 30” X 10’ infeed belt conveyor, press rolls, cutter heads & 30’ – 4 - saw payout table s/n FJ19229 & - 1 – Model: FJ 1430-25D c/w press rolls, cutter heads, flying cut off, 35’ – 5 - saw payout table & off bearing table to 12” X 35’ belt conveyor • Industrial long block conversion finger jointer c/w 4 chain X 20’ infeed, 20’ long block orienting conveyor, 30’ payout conveyor & crowder press (Partially Installed) • Over 20 – Finger joint heads & spare knives • 1997 RFS hi frequency beam gluing machine c/w 2 – RFSN40505A0200PC power supplies & COE 1000 genset • L & L 4’ X 6’ hi frequency glue press • Mereen

Johnson 312 DC multi rip saw • Western Pneumatics 800 Series finger joint grinder • Woods 134BM molder, 6 - head c/w infeed belt conveyor, large assortment of profile heads , knives, etc.

Chip Bins & Silos: Western Pneumatics 40 unit chip bin • 2 – Western Pneumatics 24 unit shavings bins c/w 2 – hydraulic power packs • 2 – 24 unit chip bins • 2 - Peerless 22 unit chip bins c/w common hydraulic power pack • A-21-15 Silo 21’ dia. X 15’ tall, 25’ conical bottom c/w twin auger conveyor • Assorted cyclones, feeders, augers, etc.

Boilers: 1999 Cleaver Brooks CEW 200-600 package boiler, 600 HP, 25,000,000 BTU • Erie City Type VL wood waste fired boiler, 300 HP 1 – single track kiln rails, controls, motors, etc. • 332 - 4’ X 9’ kiln carts • Over 70,000 kiln sticks

scragg LIne

aLLen bradLey mcc

mereen joHnson rIp saw

LYONS, OREGON • DECEMBER 6TH - 8 AM

1 OF 15

FORKLIFTS

PROFILE

HEADS

1 OF 15

FORKLIFTS

PROFILE

HEADS

2000 ford serVIce trucKuKIaH edger

Rolling Stock: John Deere 544B rubber tired loader, 3,569 Hours, s/n 2164671 • Hitachi Forester EX 270 LC-5 tracked log loader, s/n 13V1604v c/w WBM XG-600 hydraulic grapple w/ sorting jaws and v-outriggers • Allis Chalmers crawler tractor, diesel, c/w hydraulic winch • (Hyster) - H250H forklift, 182” lift, diesel, sideshift s/n C7P-28212 - 2 - H180H forklifts side shift, diesel, pneumatic tires - H110XL forklift, gas, pneumatic tires s/n 3890H - H60BCS forklift LPG cushion tires, side shift - H50XL forklift, LPG, cushion tires, side shift - H200 forklift, s/n 2575G • (Caterpillar) - V130B forklift, diesel, 218” lift, pneumatic tires, s/n 13V1604 - 3 - V180B forklifts, 18,000 lb, pneumatic tires, diesel, (1-parts only) • Toyota 42 forklift, LPG, cushion tires s/n 66202 • 2 - Yale 6000 lb forklifts, LPG, cushion tires, side shift s/n 6391 & 2416 • Clark GPX 30 forklift, LPG, cushion tires, 6,265hrs s/n 00187170KDF • 2000 Ford F550 service truck, V8 diesel, 4 speed manual, c/w Auto Crane electric crane/box, welder/generator, air compressor, etc. • International 4700 12’ flatdeck truck, S/A, p/w Detroit DT466 diesel • Freightliner FLD 120 daycab tractor, T/A

• 40’ log trailer, T/A • Mack RL700 T/A daycab tractor • Reli-ance 7.5 unit solid aluminum dump box • 1977 Chevrolet pickup truck • Portable truck loading ramp, S/A • Tenant 385 sweeper • Cat Grapple & loader bucket • 15 - sets of spare forklift forks • 50 - forklift/loader/truck tires • 3 – Forklift masts

Saw Filing & Grinding: (Armstrong) – Model: 360C stretcher roll – Models: 6LH, 4LH & 4RH bandsaw sharpeners – No. 25 circular saw sharpener, s/n 12615 - 2 - No. 17 circular saw sharpeners – No. 16 circular saw sharpener – No. 58 clamp – & 2 – stretcher rolls • Montana Machine hydraulic tensile test stand • Burton E3 round saw stretcher

Compressors: (Quincy)- QNW650G rotary screw air compres-sor p/w 150 HP motor, s/n 72796 - QNW241-D/A rotary screw,

mcdonougH resaw

LYONS, OREGON • DECEMBER 6TH - 8 AM

weInIg grInder jeffrey Hog

cHIp bInscLeaVer brooKs

toyota forKLIft

Our staff’s 50 plus years of experience in selling assets by auction or private negotiation can benefit you. Let our experience help you sell your assets.

We offer a confidential, no cost and in depth proposal for the sale of you assets, and we offer cash buyouts, guaranteed minimums, or straight commission sales.

Contact: Dan Pahl Cell 503-860-1866 or Chris Low Cell 503-807-6380

or our office 971-206-0017

InternatIonaL 4700 fLat decKnIcHoLson cHIpper

- QNW 360-B1 rotary screw, hrs s/n 870513 • 10 - assorted Quincy, Premair & Ingersoll Rand tank mounted air compressors ● Assorted air dryers/receiver tanks

Conveying Equipment: Vibrating conveyors - 48” X 40’ , 36” X 50’, 18” X 40’, 18” X 25’ • 54 - assorted transfer decks, from 2 to 11 chain • 46 - belt conveyors • 9 - rollcases • 2 - 4 chain H78 green chains,120’ & 80’ • 6 - electro mechanical tilt hoists • 5 – lumber unscramblers • Assorted screw conveyors, jump chains/rollcases, etc.

Miscellaneous Equipment: L & L 4’ X 6’ hi frequency glue press • QM 2ED73 gang rip saw p/w 60 HP motor s/n 7994 • 2 – Optimizer Series III high speed chop saws • 3 – saw cut stock station w/ length stops • 2 - Akhurst Furnimate CS-18 (L&R) upswing chop saws • Timesaver 2030 single top head sander, 30”, s/n 4455 • Sandmaster 37” single top head sander • Yasu-tora 6700 T-W diesel welder/generator • AIRCO CV-450 welder • Parker hydraulic hose crimper c/w dies • Over 15 complete banding kits w/ pneumatic cincher/crimpers • 30 ton hydraulic shop press • Lincoln/Miller welder/generators, TIG & MIG weld-ers, wire feeds, etc. • Ridgid threaders/dies • Oxy/Acetylene carts w/ hoses, torches & gauges • Large assortment of spare Cat/Hyster/Deere starters, bearings/seals, alternators, filters, joints, etc. • Assorted hydraulic/pneumatic/electrical fittings, hose, hardware • Large Quantity of fiberglass step/extension ladders

Hogs: Jeffrey 44WB hammer hog p/w 150hp motor s/n 11264 • 24” X 30” hammer hog p/w 125 HP motor • WSM 4032B ham-mer hog s/n 26283

Electrical: All wiring & conduit on site • 16 – assorted PLC’s • Over 150 motor control center sections, mostly Allen Bradley w/

size 1 – 6 starters, VFD’s, soft starts, adjustable breakers etc. • Over 30 pallets & large quantity of shelving w/ spare electrical parts including switches, buttons, lights, sensors, relays, coils, controls, conduit, starters, breakers, inverters, capacitors, buck-ets, etc. • 7 -Main disconnects • 15 - Transformers

Fire Suppression: (Dismantled) Fire system including Cum-mins N-855-F diesel pump engine, 215 HP, 2,186 hours – GE 200 HP ODP motor w/ right angle gear box – 2 - Franklin 30 HP submersible motors – 2 - Worthington 125 PSI centrifugal pumps, vertical shaft – 3 - Metron control units - large quantity of ball/gate valves, pipe, etc.

Miscellaneous: Steel substructure in mill, catwalks and stairs • Approximately 150 pneumatic/150 hydraulic spare cylinders • Hundreds of motors, reducers & gear boxes including SKK, Euro, Rex, etc. • 10 blowers to 150 HP • 12 - pallets of interior/exterior lighting • 30 - lumber carts • (Dismantled) FT Crowe 50’ single weigh bridge Crane w/ 3 ton hoist • 3 – 10,000 gallon fuel tanks, 2 – c/w pumps • 8 - diesel tanks on stands • Assorted oil/waste/hydraulic fluid/lubricant tanks • 4 - Electric forklift chargers • Large assortment of rigging/safety supplies including safety falls, harness’, chains, nylon slings, truck tie downs, etc. • Over 80 - 6’ X 4’ X 4’ steel cut stock bins • 70 – sticker racks • 12 - Self dumping scrap buckets • 7 – assorted scissor lift hoists • 8 – green chain carts ● 30’ span weigh bridge c/w Coffing 3 ton & CM hoists • Assorted A-frames, Jib cranes & mono-rails c/w electric & chain hoists/sheaves/trolleys • Large quantity of shop carts, pallet trucks, engine hoists, hand trucks, pallet racking, steel storage racks, steel tables, lockers, etc. • Lumber inventory • Office equipment including computers, desks, printers, etc.

QuIncy compressorsaLem edger

LYONS, OREGON • DECEMBER 6TH - 8 AM

1 of 31 of 3

LYONS, OREGON • DECEMBER 6TH - 8 AM

4040 SE International Way, Suite 204, Portland, OR 97222-8864(971) 206-0017 • Fax (971) 206-0019 • www.pahlindustrial.comAMEA & USPAP Certified Appraisers

joHn deere 544b Loader

PRESORTED

FIRST-CLASS MAIL

U.S. POSTAGE PAID

PERMIT NO. 106

BLAINE, WA

2 AUCTIONSVoluntary Liquidation MID VallEY FOREST PRODUCTS, llC

dec 4 - sHerIdan, ordec 6 - Lyons, or

newnes optImIzIng trImmer

newnes optImIzIng edger

newnes automatIon scanner

newnes Lumber stacKer

OPTIMIZING

LINEOPTIMIZING

LINE

DISMANTLED BLUEPRINTS AVAILABLE

DISMANTLED BLUEPRINTS AVAILABLE

1 OF 21 OF 2