Updated E- SeriesElectric

Proportioners

Markets Served

• Reactor E-20/E-30– Roofing– Residential Insulation– In-plant OEM– Rim & Band Joists

• Reactor E-XP1/E-XP2– Waterproofing– Tank coatings– Potable water– Wastewater treatment– Line striping– Manhole & sewer linings– In-plant OEM

Optional Data Reporting• Increases knowledge of

processed material

NEW! – Modular Heater Electronics• Increase performance

and reliability

Energy efficient DC motor

Quick Knockdown Fluid Sections

Reactor® E-series Key Features

NEW! – Circulation Valves• Redesigned for

isocyanate materials

NEW! Hybrid Heater Design• Utilizes direct and mass

heating for increased T

Digital User Controls

Reactor® E-20/E-30 for Foam

Specification Reactor® E-20 Reactor® E-30

Output @ 1,000 psi 16 lbs/min (7.3 kg/min) 24 lbs/min (10.9 kg/min)

Maximum Fluid Pressure

2,000 psi (13.8 MPa) 2,000 psi (13.8 MPa)

Heater Wattage 6 kW 10.2 and 15.3 kW

Max. Hose Length 210 ft (64 m) 310 ft (95 m)

Power Requirement Refer to Sales Literature 300615

Refer to Sales Literature 300615

Dimensions(H x W x D)

46 in x 31 in x 32 in(117 cm x 79 cm x 81 cm)

Preliminary Weight 340 lbs (154 kg) 400 lbs (181 kg)

Reactor® E-XP1/E-XP2 for Coating

Specification Reactor® E-XP1 Reactor® E-XP2

Output @ 1,750 psi .9 gpm (3.4 l/min) 1.8 gpm (6.8 l/min)

Maximum Fluid Pressure

2,500 psi (17.2 MPa) 3,500 psi (24.0 MPa)

Heater Wattage 10.2 kW 15.3 kW

Max. Hose Length 210 ft (64 m) 310 ft (95 m)

Power Requirement Refer to Sales Literature 300615

Refer to Sales Literature 300615

Dimensions(H x W x D)

46 in x 31 in x 32 in(117 cm x 79 cm x 81 cm)

Preliminary Weight 342 lbs (155 kg) 438 lbs (199 kg)

Reactor® System Components Select a Reactor

Select Heated Hose

Select Heated Whip Hose

Select a Fusion Gun

Select Supply Processing Components

• Supply Pump

• Agitator

REACTOR® E- series

• Sinusoidal motion smoothes pump changeover found in traditional vertical pumping systems

Proportioning Pump

Fill Stroke Discharge Stroke

Low Pressure

High Pressure

Proportioning Pump Linkage

Iso Pump Lube System

Minimizes Iso build-up on pump shaft

Can be mounted up to 300 ft. from Reactor®

Temperature Controls Pressure/Motor Control

Common Error Codes

Stop

Digital User Controls

Temperature Controls

Pressure/Motor Controls

• System diagnostics with error codes• Automatic system shutdown when user

defined pressure imbalance is detected• Data Reporting Kit (optional)

– Reports spray application data

Digital User Controls

Hybrid Heater• Combines high mass and

direct contact designs for increased Heater efficiency

Less time required to reach spray temperatures

Increased efficiency in colder ambient temperature climates

Direct Contact

High Mass Hybrid

Communication Board

Iso, Resin and Hose Heat Boards

LED Lights – indicate system status

NEW – Electronic Controls

• New electronics increases control and accuracy

• New electronics design – Increased reliability – Reduced downtime

• Heater Board divided into four components– 1 Communication Board– 3 identical Heat Boards

• Control Iso, Resin and Hose Heating zones– Each Heat Board is

interchangeable with the other

NEW – Circulation Valves

• Specifically designed for use with Isocyanate materials– Increased product

performance and reliability• Increased response when

balancing material pressures• Color coded for easy

identification– Red valve for Isocyanate or

“A” materials– Blue valve for Resin or “B”

materials

Grease fitting lubricates seals to prevent Iso crystallization

Simplified design incorporates seal into valve body

Thank you!