UMODPC 612-702-031

REDEPLOYMENTREDEPLOYMENT

UMODPC 612-702-03UMODPC 612-702-03

TOBC 500-500-20TOBC 500-500-20

REDEPLOYMENTREDEPLOYMENT

UMODPC 612-702-03UMODPC 612-702-03

TOBC 500-500-20TOBC 500-500-20

UMODPC 612-702-032

ReferencesReferencesReferencesReferences

FM 4-01.011: FM 4-01.011: Unit Movement OperationsUnit Movement Operations

FM 100-17: FM 100-17: Mobilization, Deployment, Mobilization, Deployment, Redeployment, DemobilizationRedeployment, Demobilization

FM 100-17-5: FM 100-17-5: RedeploymentRedeployment

UMODPC 612-702-033

Redeployment DefinedRedeployment Defined

- to home stationto home station

• The transfer of a unit deployed in one location:The transfer of a unit deployed in one location:

- to another area for employmentto another area for employment

UMODPC 612-702-034

• Ph I.Ph I. Recovery and Reconstitution, and Recovery and Reconstitution, and Predeployment ActivitiesPredeployment Activities

Redeployment PhasesRedeployment Phases

• Ph II.Ph II. Movement to and Movement to and Activities at POEActivities at POE

• Ph III.Ph III. Movement to Movement to PODsPODs

• Ph IV.Ph IV. Reception, Staging, Onward Reception, Staging, Onward Movement & IntegrationMovement & Integration

UMODPC 612-702-035

Ph I. Recovery,Reconstitution Ph I. Recovery,Reconstitution and Predeployment Activitiesand Predeployment Activities

- Equipment accountability and cross leveling of Equipment accountability and cross leveling of equipment and personnelequipment and personnel

• After completing military operations, units move After completing military operations, units move to assembly areas to prepare for redeploymentto assembly areas to prepare for redeployment

• Redeployment reconstitution focuses on:Redeployment reconstitution focuses on:

- Attaining required unit readiness levelsAttaining required unit readiness levels

UMODPC 612-702-036

Redeployment PlanningRedeployment Planning

• Units develop their redeployment movement Units develop their redeployment movement plans based on higher hqs plansplans based on higher hqs plans

• Redeployment OPLAN is key document. Redeployment OPLAN is key document. Normally contains guidance on:Normally contains guidance on:

- Recovery and reconstitution activitiesRecovery and reconstitution activities

- Movement of units, individuals and materielMovement of units, individuals and materiel

- Re-establishment of APS stocks that Re-establishment of APS stocks that were drawn during deploymentwere drawn during deployment

UMODPC 612-702-037

Key Redeployment Key Redeployment OrganizationsOrganizations

Identifies organizations responsible for Identifies organizations responsible for supporting redeployment supporting redeployment

- Army Service Component Command (ASCC) or Army ForcesForces (ARFOR) commander:- Plan reconstitution and redeployment of Army Plan reconstitution and redeployment of Army forces based on Joint Force Commanderforces based on Joint Force Commander (JFC) guidance(JFC) guidance

UMODPC 612-702-038

Key Redeployment Key Redeployment Organizations (Cont)Organizations (Cont)

• Theater Support Command:Theater Support Command:

- Coordinates logistics support for redeployingCoordinates logistics support for redeploying units including:units including:

+ Field services (laundry bath)Field services (laundry bath)

+ Maintenance and customs requirementsMaintenance and customs requirements

+ BBPCT needsBBPCT needs

UMODPC 612-702-039

Key Redeployment Key Redeployment Organizations (Cont)Organizations (Cont)

• InstallationsInstallations

- Receive redeploying units at PODReceive redeploying units at POD

- Coordinate and support unit movements from Coordinate and support unit movements from POD to home station or demobilization stationPOD to home station or demobilization station

UMODPC 612-702-0310

Redeployment Transit Redeployment Transit AreasAreas

Redeployment Transit Redeployment Transit AreasAreas

• Areas designated to support redeployment Areas designated to support redeployment movement from AO to final destinationmovement from AO to final destination Includes:Includes:

- Assembly Area (AA)Assembly Area (AA)- Redeployment Assembly Area (RAA)Redeployment Assembly Area (RAA)- Marshaling Areas & Staging AreasMarshaling Areas & Staging Areas- ASCC/ARFOR will designate transit areasASCC/ARFOR will designate transit areas

UMODPC 612-702-0311

Assembly AreaAssembly Area

• Assembly Area (AA):Assembly Area (AA):- Designated for units to assemble in afterDesignated for units to assemble in after completion of operational mission completion of operational mission

- Unit moves to AA for initial redeployment Unit moves to AA for initial redeployment preparationpreparation

- AA activities include reorganization, cross AA activities include reorganization, cross leveling of supplies, and preparation for leveling of supplies, and preparation for movement to RAA or port area.movement to RAA or port area.

UMODPC 612-702-0312

Assembly Area (notional)Assembly Area (notional)Assembly Area (notional)Assembly Area (notional)

ENTRANCE

UnitAssembly

Area

UnitAssembly

Area

UnitAssembly

Area

PARKING

EquipmentReconstitution

and Cross leveling

ToPOE

or RAA

HazardousMaterialArea

• Remove• Inventory• Package

Admin • Update AUEL• Coordinate Customs and

Agriculture Inspections• Identify 463L Pallet

Requirements• Request Theater Movement

UnitConvoys

UnitConvoys

UnitConvoys

Equipment Preparation • Repairing• Cleaning• Marking• Securing Internal Loads

UMODPC 612-702-0313

Redeployment Assembly Redeployment Assembly AreaArea

• Redeployment Assembly Area (RAA):Redeployment Assembly Area (RAA):

- RAA focus is preparation for move to POERAA focus is preparation for move to POE

- Normally located in COMMZNormally located in COMMZ

- RAA may be established due to securityRAA may be established due to security concerns, or when AA support is not adequateconcerns, or when AA support is not adequate for redeployment preparationfor redeployment preparation

UMODPC 612-702-0314

Redeployment Assembly Redeployment Assembly Area (notional)Area (notional)

Redeployment Assembly Redeployment Assembly Area (notional)Area (notional)

ENTRANCE

UnitAssembly

Area

UnitAssembly

Area

UnitAssembly

Area

PARKING

Customsand

AgricultureInspections

ToPOE

VehicleWashArea

Host Nation/ContractorEquipment

Turn-In

UnitConvoys

UnitConvoys

UnitConvoys

Final Preparation

andSterile

EquipmentArea

CONVOY

READY

LINEADMIN

UMODPC 612-702-0315

Theater Staging Base Theater Staging Base (TSB)(TSB)

Theater Staging Base Theater Staging Base (TSB)(TSB)

• Theater Staging Base:Theater Staging Base:

- Established to support movements over Established to support movements over long lines of communication (LOC)long lines of communication (LOC)

- May be required for redeployment of largeMay be required for redeployment of large forcesforces

UMODPC 612-702-0316

Marshalling AreasMarshalling Areas

• Marshaling Areas at POEs:Marshaling Areas at POEs:

- Final unit preparation area prior to moving toFinal unit preparation area prior to moving to POE operations areaPOE operations area

- Personnel and equipment separatedPersonnel and equipment separated- Equipment configured for shipmentEquipment configured for shipment- Generally includes call forward areas (CFA)Generally includes call forward areas (CFA) and sterile areas. and sterile areas.

UMODPC 612-702-0317

Redeployment RoutingRedeployment Routing

• Redeployment plan identifies redeploying Redeployment plan identifies redeploying unit routingunit routing

• Routing considerations include:Routing considerations include:

- Size of redeploying forceSize of redeploying force

- Distance to POEDistance to POE

- Time availableTime available

- Enemy activityEnemy activity

UMODPC 612-702-0318

Redeployment RoutingRedeployment RoutingScenariosScenarios

Redeployment RoutingRedeployment RoutingScenariosScenarios

UNIT

RedeploymentAssembly

Area

AssemblyArea

TSB POD

Area ofOperation

HomeStation

POE

UMODPC 612-702-0319

SUMMARYSUMMARYSUMMARYSUMMARY

UMODPC 612-702-0320

OnOnLearninLearnin

gg

UMODPC 612-702-0321

OnOnLearningLearning

QUESTION 1: QUESTION 1: What theater level command is What theater level command is responsible for coordinating & monitoring theaterresponsible for coordinating & monitoring theaterlogistics support for redeploying units duringlogistics support for redeploying units duringmovement from assembly areas to POEs?movement from assembly areas to POEs?

Answer 1: Answer 1: The Theater Support Command (TSC)The Theater Support Command (TSC)coordinates theater logistics activities to support coordinates theater logistics activities to support redeploying unit movement from AAs to POEs.redeploying unit movement from AAs to POEs.

UMODPC 612-702-0322

OnOnLearningLearning

Answer 2: Answer 2: Redeployment Assembly Areas Redeployment Assembly Areas (RAA) .(RAA) .

QUESTION 2: QUESTION 2: What transit area is normallyWhat transit area is normallyestablished to prepare a unit for redeployment established to prepare a unit for redeployment when threat of attack or insufficient supportwhen threat of attack or insufficient supportstructure prevents the unit from completingstructure prevents the unit from completingredeployment preparation in the Assembly Area.redeployment preparation in the Assembly Area.

UMODPC 612-702-0323

Supporting Commands,Unit & UMO Supporting Commands,Unit & UMO Redeployment Activities -- Redeployment Activities --

Phases II through IVPhases II through IV

Phase II.Phase II. Movement to & Activities at POE Movement to & Activities at POE

Phase III.Phase III. Movement to POD Movement to POD

Phase IV.Phase IV. RSO&I RSO&I

UMODPC 612-702-0324

Ph II. Movement to POE Ph II. Movement to POE Activities -- ASCC/ARFORActivities -- ASCC/ARFOR

• ASCC/ARFORASCC/ARFOR Actions: Actions:

Develop OPORD for redeployment -- Provide Develop OPORD for redeployment -- Provide info for redeployment requirements and info for redeployment requirements and proceduresprocedures

- Develop redeployment timelinesDevelop redeployment timelines

- Verify unit movement and readiness dataVerify unit movement and readiness data

UMODPC 612-702-0325

Ph II. Movement to POE Ph II. Movement to POE Activities -- TSCActivities -- TSC

Ph II. Movement to POE Ph II. Movement to POE Activities -- TSCActivities -- TSC

- Control unit movements to POEControl unit movements to POE

• Theater Support CommandTheater Support Command (TSC) Actions: (TSC) Actions:

- Establish procedures to process APS & excessEstablish procedures to process APS & excess materielmateriel- Establish & operate convoy support centersEstablish & operate convoy support centers and POE marshaling areasand POE marshaling areas

UMODPC 612-702-0326

Phase II. Movement to POE Phase II. Movement to POE Activities -- Redeploying UnitActivities -- Redeploying Unit

• Unit & UMOUnit & UMO Movement Activities in AA or RAA: Movement Activities in AA or RAA:

- Develop and refine the UDLDevelop and refine the UDL

- Pack and load containers -- must comply withPack and load containers -- must comply with agriculture and customs requirementsagriculture and customs requirements

- Identify BBPCT, container, flatrack and 463LIdentify BBPCT, container, flatrack and 463L pallet requirementspallet requirements

UMODPC 612-702-0327

Phase II. Movement to POE Phase II. Movement to POE Activities -- Unit (Cont)Activities -- Unit (Cont)

Phase II. Movement to POE Phase II. Movement to POE Activities -- Unit (Cont)Activities -- Unit (Cont)

• UMO & UnitUMO & Unit Movement Activities in AA or RAA: Movement Activities in AA or RAA: (Cont’)(Cont’)

- Conduct wash-down and customs inspectionConduct wash-down and customs inspection

- Prepare to provide load teams & drivers to POEPrepare to provide load teams & drivers to POE- Process excess equipment for turn-inProcess excess equipment for turn-in

- If deploying to new theater for operations, drawIf deploying to new theater for operations, draw and receive required equipment and receive required equipment

UMODPC 612-702-0328

Phase II. Movement to POE Phase II. Movement to POE Activities -- Unit (Cont)Activities -- Unit (Cont)

Configure equipment for transport (e.g., Configure equipment for transport (e.g., convoy, rail)convoy, rail)

• UMO & UnitUMO & Unit Movement Activities in AA or Movement Activities in AA or RAA: (Cont’)RAA: (Cont’)

- Load equipment, containers, flatracks Load equipment, containers, flatracks and 463L pallets -- Coordinate with customsand 463L pallets -- Coordinate with customs prior to loading containers & military vansprior to loading containers & military vans (MILVANS)(MILVANS)

UMODPC 612-702-0329

Phase II. Activities at the Phase II. Activities at the POEPOE

Phase II. Activities at the Phase II. Activities at the POEPOE

• Units redeploy through APOEs and SPOEsUnits redeploy through APOEs and SPOEs Could also redeploy via rail and roadCould also redeploy via rail and road

• POE procedures are same for redeployment to POE procedures are same for redeployment to home station & redeployment to second theater home station & redeployment to second theater of operationsof operations

UMODPC 612-702-0330

Phase II. Activities at the Phase II. Activities at the POE -- TSCPOE -- TSC

Provide or coordinate DACG & PSA Provide or coordinate DACG & PSA support, as requiredsupport, as required

• TSCTSC Activities: Activities:

- Control unit moves from combat zone to POEControl unit moves from combat zone to POE

- Operate marshaling area/equipment turn-in Operate marshaling area/equipment turn-in sitessites

UMODPC 612-702-0331

Phase II. Activities at the Phase II. Activities at the POE-- Redeploying UnitPOE-- Redeploying UnitPhase II. Activities at the Phase II. Activities at the POE-- Redeploying UnitPOE-- Redeploying Unit

Send liaison officer to POE operations area Send liaison officer to POE operations area and equipment turn-in/issue sitesand equipment turn-in/issue sites

• UMO & UnitUMO & Unit Movement Activities upon arrival Movement Activities upon arrival at POEat POE

- Unit normally moves to POE marshaling areaUnit normally moves to POE marshaling area

- Unit prepares unit equipment & personnel forUnit prepares unit equipment & personnel for processing through POE operations areasprocessing through POE operations areas

UMODPC 612-702-0332

Phase II. Activities at the POE Phase II. Activities at the POE -- Redeploying Unit (Cont)-- Redeploying Unit (Cont)

• UMO & UnitUMO & Unit Movement Activities upon arrival at Movement Activities upon arrival at POE (Cont’)POE (Cont’)

- Move equipment to turn-in sites, as requiredMove equipment to turn-in sites, as required

- Move load teams to APOE/SPOE operating Move load teams to APOE/SPOE operating areas, as requiredareas, as required

- Load containers that were not stuffed in Load containers that were not stuffed in assembly areasassembly areas

UMODPC 612-702-0333

Phase II. Activities at the POE Phase II. Activities at the POE -- Redeploying Unit (Cont)-- Redeploying Unit (Cont)

• UMO & UnitUMO & Unit Movement Activities upon arrival Movement Activities upon arrival at POE (Cont’) at POE (Cont’)

- Finalize movement documentationFinalize movement documentation (UDLs, HAZMAT, cargo load plans, MSLs, AIT (UDLs, HAZMAT, cargo load plans, MSLs, AIT storage devices)storage devices)

- Conduct customs (if not previously completedConduct customs (if not previously completed in AA or RAA)in AA or RAA)

- Conduct final wash-downConduct final wash-down

UMODPC 612-702-0334

Phase II. Activities at the POE Phase II. Activities at the POE Redeploying Unit (Cont)Redeploying Unit (Cont)

• UMO & UnitUMO & Unit Movement Activities in POE Movement Activities in POE staging/operating areas:staging/operating areas:

- Unit responsibilities & procedures for Unit responsibilities & procedures for POE processing essentially same as deployment POE processing essentially same as deployment

- APOE (marshaling area, alert holding area, call APOE (marshaling area, alert holding area, call forward area, ready line)forward area, ready line)

- SPOE (marshaling area, staging area, vessel SPOE (marshaling area, staging area, vessel loading area)loading area)

UMODPC 612-702-0335

Customs and Agricultural Customs and Agricultural Clearance ProceduresClearance Procedures

• Inspections can occur at any Inspections can occur at any redeployment node (AA, RAA, POE, POD)redeployment node (AA, RAA, POE, POD)

• Redeploying units coordinate inspection timesRedeploying units coordinate inspection times with US Customs officials.with US Customs officials.

• Equipment inspection must be completed Equipment inspection must be completed NLT 24 hours prior to departing POENLT 24 hours prior to departing POE

UMODPC 612-702-0336

Customs and Agricultural Customs and Agricultural Clearance Procedures (Cont)Clearance Procedures (Cont)

After passing inspection, equipment moves After passing inspection, equipment moves to sterile areato sterile area

• Unit equipment cleaned and laid out priorUnit equipment cleaned and laid out prior to inspectionto inspection

- Must meet USDA standards - 100% free of soil, Must meet USDA standards - 100% free of soil, vegetation, pestsvegetation, pests- Requires wash racks and steam cleanersRequires wash racks and steam cleaners- Customs normally checks equipment atCustoms normally checks equipment at wash rack areawash rack area

UMODPC 612-702-0337

Customs and Agricultural Customs and Agricultural Clearance Procedures (Cont)Clearance Procedures (Cont)

• Containers, pallets, crates inspected by customsContainers, pallets, crates inspected by customs as they are loaded / builtas they are loaded / built

- Units inspect all baggage for cleanliness Units inspect all baggage for cleanliness & prohibited items before moving to customs& prohibited items before moving to customs inspection point.inspection point.- Customs inspects 24 hrs before departureCustoms inspects 24 hrs before departure- After inspection, baggage placed in sterile areaAfter inspection, baggage placed in sterile area

• Unit baggage:Unit baggage:

UMODPC 612-702-0338

Customs and Agricultural Customs and Agricultural Clearance Procedures (Cont)Clearance Procedures (Cont)

• Redeploying Soldiers:Redeploying Soldiers:

- Soldiers and carry-on baggage process throughSoldiers and carry-on baggage process through customs 4-6 hrs prior to departurecustoms 4-6 hrs prior to departure- When cleared by customs, soldiers remainWhen cleared by customs, soldiers remain in sterile area until departure. in sterile area until departure.

UMODPC 612-702-0339

Ph III. Movement to POD Ph III. Movement to POD

• From boarding at POE to offload at POD, From boarding at POE to offload at POD, passengers & cargo under USTRANSCOM passengers & cargo under USTRANSCOM authority authority • Redeploying unit may provide supercargoesRedeploying unit may provide supercargoes aboard shipsaboard ships

- Supercargoes secure and maintain unit cargo Supercargoes secure and maintain unit cargo during transitduring transit- Perform as unit liaison during discharge Perform as unit liaison during discharge operations at SPOD operations at SPOD

UMODPC 612-702-0340

Ph IV. RSO&IPh IV. RSO&IPh IV. RSO&IPh IV. RSO&I

• As RSO&I covered in previous lesson, focus is As RSO&I covered in previous lesson, focus is on redeployment to home/demobilization station on redeployment to home/demobilization station

• Units redeploying to another overseas locationUnits redeploying to another overseas location for operations -- for operations --

- Begin RSO&I processes at POD Begin RSO&I processes at POD • Units redeploying to home/demobilizationUnits redeploying to home/demobilization stations --stations --

- Undergo reception and onward movement Undergo reception and onward movement activitiesactivities

UMODPC 612-702-0341

ReceptionReceptionReceptionReception

• Reception process consists of:Reception process consists of:

- Offloading personnel and equipment from Offloading personnel and equipment from strategic or operational transportstrategic or operational transport

- Marshaling local transportationMarshaling local transportation

• Reception and onward movement plan Reception and onward movement plan developed by Supporting Installation (SI) developed by Supporting Installation (SI) and Commander receiving the forcesand Commander receiving the forces

UMODPC 612-702-0342

Reception (Cont)Reception (Cont)Reception (Cont)Reception (Cont)

• Supporting Installation functionsSupporting Installation functions

- Plans / executes return of units from Plans / executes return of units from POD -- processes convoy requests & obtains POD -- processes convoy requests & obtains commercial transportationcommercial transportation

- Establishes enroute support sites required by Establishes enroute support sites required by redeployment planredeployment plan

UMODPC 612-702-0343

Reception (Cont)Reception (Cont)Reception (Cont)Reception (Cont)

• Redeploying Unit & UMO Functions at PODRedeploying Unit & UMO Functions at POD

- Provide download teams and drivers to move Provide download teams and drivers to move equipment to marshaling areaequipment to marshaling area- Coordinate required customs and USDA Coordinate required customs and USDA clearance inspection with port operatorclearance inspection with port operator

- Perform equipment inspections & process Perform equipment inspections & process movement documentationmovement documentation

- UMO coordinates return of all equipment and UMO coordinates return of all equipment and soldiers with SI reps or ITO soldiers with SI reps or ITO

UMODPC 612-702-0344

Onward MovementOnward MovementOnward MovementOnward Movement

• UMO coordinates with SI and ITO for UMO coordinates with SI and ITO for appropriate convoy clearances, railhead appropriate convoy clearances, railhead support, and enroute movement supportsupport, and enroute movement support

• Defined as process of moving personnel andDefined as process of moving personnel and accompanying materiel from reception accompanying materiel from reception marshaling / staging areas to their destinationsmarshaling / staging areas to their destinations

• Onward movement mode is typically the same as Onward movement mode is typically the same as deployment fort to POE move (e.g., convoy,deployment fort to POE move (e.g., convoy, rail, bus)rail, bus)

UMODPC 612-702-0345

Activities at Destination Activities at Destination InstallationsInstallations

• Supporting Installation:Supporting Installation:- Provides transportation & MHE/CHE as required Provides transportation & MHE/CHE as required to assist unit unloadingto assist unit unloading

• Redeploying Unit Functions:Redeploying Unit Functions:

- Unload and turn-in equipment, as requiredUnload and turn-in equipment, as required

- UMO updates AUEL and processes throughUMO updates AUEL and processes through UMC, and prepares for next possible deploymentUMC, and prepares for next possible deployment

UMODPC 612-702-0346

SUMMARYSUMMARYSUMMARYSUMMARY

UMODPC 612-702-0347

OnOnLearninLearnin

gg

UMODPC 612-702-0348

OnOnLearningLearning

QUESTION 1: QUESTION 1: What redeployment specificWhat redeployment specificUS Government clearance processes mustUS Government clearance processes must the unit plan for and undergo in theater prior to the unit plan for and undergo in theater prior to departing the POE for CONUS locations?departing the POE for CONUS locations?

Answer 1: Answer 1: Prior to departing POD: Prior to departing POD: All DoD equipment/cargo is inspected by All DoD equipment/cargo is inspected by Customs & USDA Customs & USDA Soldiers and their baggage clear customsSoldiers and their baggage clear customs

UMODPC 612-702-0349

OnOnLearningLearning

Answer 2: Answer 2: UMOs coordinate with supporting UMOs coordinate with supporting installation ITO reps to arrange/finalize onward installation ITO reps to arrange/finalize onward movement to home stationmovement to home station

QUESTION 2: QUESTION 2: For units redeploying to homeFor units redeploying to homestation in CONUS, who does the UMO station in CONUS, who does the UMO coordinate with at the POD for onwardcoordinate with at the POD for onwardmovement of personnel and equipmentmovement of personnel and equipment

UMODPC 612-702-0350

UMODPC 612-702-0351

OnReview

OnReview

UMODPC 612-702-0352

OnOnReviewReview

Answer 1: Answer 1: The JFC or ASCC/ARFOR The JFC or ASCC/ARFOR redeployment operations plan or order identifies redeployment operations plan or order identifies transit areas. Specific redeploying unit areas are transit areas. Specific redeploying unit areas are normally identified in the unit’s higher hqs normally identified in the unit’s higher hqs movement plans and ordersmovement plans and orders

Question 1: Question 1: How does the UMO determineHow does the UMO determinethe various transit areas in theater that the unitthe various transit areas in theater that the unitwill use during redeployment?will use during redeployment?

UMODPC 612-702-0353

Answer 2: Answer 2: The unit sends liaison personnel to The unit sends liaison personnel to POE operations area for coordination with port POE operations area for coordination with port operations staff, DACG, and the PSA, and to operations staff, DACG, and the PSA, and to equipment turn-in sites (as required).equipment turn-in sites (as required).

Question 2: Question 2: When arriving at the redeployment When arriving at the redeployment POE marshaling area, the redeploying unit should POE marshaling area, the redeploying unit should provide liaison officers to what organizations?provide liaison officers to what organizations?

OnOnReviewReview

UMODPC 612-702-0354

Answer 3: Answer 3: During Ph IV, (RSO&I), supportingDuring Ph IV, (RSO&I), supportinginstallations normally have responsibility for installations normally have responsibility for supporting unit arrival at POD, and onward supporting unit arrival at POD, and onward movement to destination.movement to destination.

Question 3: Question 3: In what redeployment phaseIn what redeployment phasedoes the installation have primary responsibilitydoes the installation have primary responsibilityfor providing support to units that are redeployingfor providing support to units that are redeployingto home station?to home station?

OnOnReviewReview

UMODPC 612-702-0355

Answer 4: Answer 4: The UMO updates the AUEL and The UMO updates the AUEL and processes changes with the installation UMC. processes changes with the installation UMC.

QUESTION 4: QUESTION 4: After the redeploying unit After the redeploying unit arrives at home station, what are UMOarrives at home station, what are UMOresponsibilities for unit movement data?responsibilities for unit movement data?

OnOnReviewReview

UMODPC 612-702-0356

QUESTIONS ???

QUESTIONS ???

UMODPC 612-702-0357

UMODPC 612-702-0358

BreakBreakBreakBreak

10 mins10 mins10 mins10 mins

U M O D P CU M O D P CU M O D P CU M O D P C