ULTRASOUND AND EDDY CURRENT ARRAY · 2013. 2. 21. · ULTRASOUND AND EDDY CURRENT ARRAY > Product Catalogue. With over 40 years of experience in supporting power plant inspections

2009ULTRASOUND AND EDDY CURRENT ARRAY

> Product Catalogue

With over 40 years of experience in supporting power plant inspections around

the world, Zetec knows that the cost of an inspection is determined by much more than

just the cost of tools. Other major factors include time, available and qualifi ed manpower,

proven technology and performing instruments. By taking all these factors into account,

Zetec has set the standard for cost-effective inspections of power plants worldwide,

ensuring their safe operation and longer, more productive lifetime.

Zetec is one of the world’s leading suppliers of NDE solutions for power

plants. Customers rely heavily on our equipment to assess the condition of their critical

infrastructure. Zetec also has the resources, personnel, and expertise to develop custom

inspection solutions and methods.

Zetec can provide carefully integrated acquisition systems, which include

control hardware, ultrasonic testers, and proprietary standard-setting data analysis

software for seamless fi eld deployments.

CATALOGUE > INTRODUCTION

UT INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

UT SYSTEMS

DYNARAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Tomoscan III PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Z-Scan PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

OmniScan PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tomoscan III UT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Z-Scan UT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

OmniScan UT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

UT SOFTWARE

UltraVision 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

UltraVision 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Zetec Advanced PA Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

UltraVision Software Upgrades and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

UT SCANNERS AND MOTOR CONTROLLERS

Manual Pipe Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Mouse Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Automated Pipe Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Phased Array Tube Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Motor Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

PA PROBES AND WEDGES

Generic PA Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

OmniScan PA Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Integrated Dual 2D PA Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

PA Wedges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

> TABLE OF CONTENTS

Table of Contents > i

PDI-QUALIFIED PROCEDURES & EQUIPMENT

PDI CS and SS Piping Welds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

PDI DMW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

TOFD INSPECTIONS

TOFD UT Probes and Wedges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

TOFD Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

TOFD Inspection Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

GENERIC ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

EDDY CURRENT ARRAY INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

ECA SYSTEMS

MS5800-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

TC7700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Multiplexers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

ECA SOFTWARE

ECVision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

ECA PROBES

For Weld Inspections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

For Turbine Inspections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

SERVICES INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

UT Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Calibration Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Warranty and Quality Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

> TABLE OF CONTENTS

ii > Table of Contents

Zetec is the leading supplier of phased array UT systems for the power generation industry.

Using software control, our phased array UT systems allow for the electronic modifi cation

of the acoustic characteristics of phased array probes. Phased array probes are made of multiple

elements. Those elements are excited at slightly different times, allowing the generation of

ultrasound beams of various angles, shapes and focal depths from a single phased array probe.

Also, by multiplexing probe elements, the active aperture can be scanned along the

probe axis without any mechanical movements along that axis.

All these characteristics mean using fewer probes and performing more effective inspections,

for instance by allowing for the replacement of two-axis scan patterns with a single axis scan,

typically improving inspection speed by a factor 5 to 10, and often considerably simplifying the

scanning mechanisms used.

Other benefi ts of phased array UT inspection technologies include better coverage and optimal

focusing throughout the full thickness range of the component, and easier adjustment to actual

fi eld conditions due to software controlled beam angles and profi les.

UT > INTRODUCTION

UT > Introduction > 1

UT > SYSTEMS

DYNARAY®

Innovative, high-performance phased array system > for remote controlled data acquisition

Up to 256 simultaneously active channels>

Position dependant focal laws, for superior inspection > quality on complex surfaces

Up to 4,096 different focal laws>

Drives low-frequency array probes (down to 0.5 MHz)>

High data throughput, up to 20 MB/s>

PC-controlled through UltraVision® 3, offering a > 3-D work environment for component creation and data visualization

Zetec’s innovative DYNARAY system completely redefi nes the potential of phased array UT technology by enabling highly effi cient and more fl exible inspection solutions. This extremely powerful phased array UT data acquisition system can be confi gured with up to 256 simultaneously active channels to fully benefi t from the versatility of 2-D matrix array probes.

The DYNARAY system offers superior inspection capabilities on rough and wavy surfaces. Owing to its raw processing power, the system supports position dependant focal laws sent to the phased array probe during the inspection sequence as a function of the probe position.

2 > UT > Systems > DYNARAY

10024414 ZPA-RDT-DYNARAY-64/64PR DYNARAY 64/64PR – Innovative phased array system, up to 64 simult. active channels – Can use the same 64 channels as transmitters and receivers or 64 channels as transmitters and 64 others as receivers – 2 Hypertronics and 16 Lemo00 connectors



10024415 ZPA-RDT-DYNARAY-64/256PR DYNARAY 64/256PR – Innovative phased array system, up to 64 simult. active channels and 256 in total – Can use same 64 channels as transmitters and receivers or 64 channels as transm. and 64 others as receivers – 4 Hypertronics and 16 Lemo00 connectors

Ordering Information > DYNARAY

UT > SYSTEMS

UT > Systems > DYNARAY > 3

10024815 ZPA-RDT-DYNARAY-128/128PR-UPG64 DYNARAY 128/128PR – Upgrade from DYNARAY 64/64PR – Includes Manufacturing Verifi cation and Calibration



10024419 ZPA-ACC-DYNARAY-UTADAPT1-16CH Adapter box with 16 UT channels (LEMO00 connectors) and 1 Hypertronics connector, to connect to Hypertronics connector of DYNARAY 64/256PR, 128/128PR and 256/256PR – This item is also included with each of the mentioned DYNARAY systems

10024420 ZPA-ACC-DYNARAY-UTADAPT2-16CH Adapter box with 16 UT channels (LEMO00 connectors) and 1 Hypertronics connector, to connect to Hypertronics connector of DYNARAY 64/64PR – This item is also included with the DYNARAY 64/64PR

10024816 ZPA-RDT-DYNARAY-BOGEY Foldable transportation bogey for DYNARAY – Fits in transportation case

10024429 ZPA-RDT-DYNARAY-DOC-EN DYNARAY User's Manual – English

Ordering Information > DYNARAY

Accessories and documentation > DYNARAY

UT > SYSTEMS

Tomoscan III PA

High-performance phased array system for remote > controlled data acquisition

Setup, data acquisition and data analysis using > UltraVision® 1 running on PC

Allows for connection to 6 encoders, with 2 encoders > simultaneously active

The Tomoscan III PA system has a world-wide reputation of reliability, performance and fl exibility for high-end phased array UT applications. It interfaces with all Zetec scanners, and is second only to the DYNARAY in terms of fl exibility and power available of any automated inspection system on the market.

Flexible hardware allows the Tomoscan III PA to interface with virtually any manipulator used in typical in-service inspections on reactor pressure vessels, CRDM head penetrations, and pipe welds.

In many applications, phased array systems can drastically increase inspection speeds compared to conventional techniques.

1320-00-6410 ZPA-RDT-TOMO3-32/64PR-PIM351 Tomoscan III PA system, 32/64, PIM351- 32 simultaneously active channels and 64 channels in total – PIM 351 (1 Hypertronics phased array connector + 8 Lemo00 UT connectors) – Includes encoder adapter cable T3-Cable-ADP-ENC

1320-00-6411 ZPA-RDT-TOMO3-32/64PR-PIM351-DDF Tomoscan III PA system, 32/64, PIM351, with Dynamic Depth Focusing option – 32 simult. active channels and 64 in total – PIM 351 (1 Hypertronics PA connector + 8 Lemo00 UT connectors) – includes encoder adapter cable T3-Cable-ADP-ENC

1320-00-12810 ZPA-RDT-TOMO3-32/128PR-PIM351 Tomoscan III PA system, 32/128, PIM351 – 32 simultaneously active channels and 128 channels in total – PIM 351 (1 Hypertronics phased array connector + 8 Lemo00 UT connectors) – Includes encoder adapter cable T3-Cable-ADP-ENC

1320-00-12811 ZPA-RDT-TOMO3-32/128PR-PIM351-DDF Tomoscan III PA system, 32/128, PIM351, with Dynamic Depth Focusing option – 32 simult. active channels and 128 in total – PIM 351 (1 Hypertronics PA connector + 8 Lemo00 UT connectors) – Includes encoder adapter cable T3-Cable-ADP-ENC

1320-00-12820 ZPA-RDT-TOMO3-32/128PR-PIM352 Tomoscan III PA system, 32/128, PIM352 – 32 simultaneously active channels and 128 channels in total – PIM 352 (2 Hypertronics phased array connectors + 8 Lemo00 UT connectors) – Includes encoder adapter cable T3-Cable-ADP-ENC

1320-00-12821 ZPA-RDT-TOMO3-32/128PR-PIM352-DDF Tomoscan III PA system, 32/128, PIM352, with Dynamic Depth Focusing option – 32 simult. active channels and 128 in total – PIM 352 (2 Hypertronics PA connectors + 8 Lemo00 UT connectors) – Includes encoder adapter cable T3-Cable-ADP-ENC

Ordering Information > Tomoscan III PA

4 > UT > Systems > Tomoscan III PA

UT > SYSTEMS

UT > Systems > Tomoscan III PA > 5

1320-08-0001 ZPA-RDT-TOMO3-DOC-EN Tomoscan III PA User's Manual – English

1320-60-0030 ZGN-ACC-TOMO3-VORTEX OPTX377A – Air-driven cooling unit (Vortex-based) that evacuates heat using pressurized air feed: 100 PSI (6.9 bar) at 25 SCFM (710 SLPM) evacuates 1500 BTUH (440 W)

1320-30-0010 ZGN-ACC-TOMO3-ENCCBL EWUX1166A – Encoder adapter cable for Tomoscan III PA – interfaces to encoder inputs compatible with μTomoscan and Tomoscan FOCUS equipments

1320-60-0010 ZPA-ACC-TOMO3-TESTCONN1 BQUS002A – Phased array test connector for Tomoscan III PA system with PIM 351 (1 Hypertronics), includes software setup

1320-60-0020 ZPA-ACC-TOMO3-TESTCONN2 BQUS009A – Phased array test connector for Tomoscan III PA system with PIM 352 (dual Hypertronics connector), includes software setup

Accessories and documentation > Tomoscan III PA

UT > SYSTEMS

Z-Scan® PA

Compact and lightweight PA system>

Up to 64 simultaneously active PA channels, > 128 in total

4 conventional UT channels>

Linear amplifi ers>

8-bit or 10-bit 100 MHz A/D converter>

High pulsing rate (up to 20 kHz)>

Data throughput 4 MB/sec>

2 simultaneous position encoder inputs>

Zetec’s Z-Scan PA is a powerful, fl exible, and compact phased array UT system for remote controlled data acquisition. It features real-time data compression, signal averaging, and Dynamic Depth Focusing (DDF). This acquisition system interfaces with Zetec scanners and standard PCs through the UltraVision® 1 software, for excellent data acquisition and analysis capabilities.

1350-00-0161 ZPA-RDT-ZSCAN-16/128 Z-Scan PA 16/128, up to 16 simultaneously active channels and 128 in total – OmniScan PA connector + 4 Lemo00 UT connectors

1350-00-0162 ZPA-RDT-ZSCAN-16/128PR Z-Scan PA 16/128PR, up to 16 simultaneously active channels and 128 in total – Can use the same 16 channels as transmitters and receivers or 16 channels as transmitters and 16 others as receivers – OmniScan PA connector + 4 Lemo00 UT connectors

1350-00-0321 ZPA-RDT-ZSCAN-32/32 Z-Scan PA 32/32, up to 32 simultaneously active channels and 32 in total – Can use the same 32 channels as transmitters and receivers or 16 channels as transmitters and 16 others as receivers – OmniScan PA connector



1350-00-1285 ZPA-RDT-ZSCAN-64/64 Z-Scan PA 64/64, up to 64 simultaneously active channels and 64 in total – Can use the same 64 channels as transmitters and receivers or 32 channels as transmitters and 32 others as receivers – OmniScan PA connector

Ordering Information > Z-Scan PA

6 > UT > Systems > Z-Scan PA

UT > SYSTEMS

UT > Systems > Z-Scan PA > 7



1350-60-0001 ZPA-ACC-ZSCAN-EXTBATT External battery for Z-Scan PA

10024388 ZPA-RDT-ZSCAN-DOC-EN Z-Scan PA User's Manual – English

Ordering Information > Z-Scan PA

Accessories and documentation > Z-Scan PA

UT > SYSTEMS

OmniScan® PA

Battery operated phased array system>

Splash proof, shockproof, and easy to clean>

Multi-channel PA operation>

On-board analysis capabilities>

UltraVision® 1 remote control and data > analysis support

Zetec’s OmniScan meets a wide range of NDE inspection requirements. It offers high acquisition rates and powerful software features in a portable, modular mainframe. It effi ciently performs manual as well as fully-automated PA inspections.

The OmniScan’s solid casing and rubber bumpers make it a rugged instrument that withstands drops and shocks. It can be carried easily and used in harsh fi eld conditions, indoors or outdoors, and operates during six hours on its two Li-ion batteries.

The 8.4-inch display has a SVGA resolution of 800 × 600. A scroll knob and function keys make it easy to browse through and select functions. Mouse and keyboard support is included.

The OmniScan offers the standard PC ports: USB, RS-232, SVGA out, and Ethernet™. It offers data storage capability via a CF (CompactFlash®) card slots or USB devices.

(OmniScan is a trademark of R/D Tech.)

1343-01-0005 ZPA-UIT-OMNISCAN-16/128-MOD OmniScan PA 16/128 Module – Up to 16 simult. active channels and 128 in total – OmniScan PA connector + 2 BNC

1343-01-0010 ZPA-UIT-OMNISCAN-16/128PR-MOD OmniScan PA 16/128PR Module – Up to 16 simult. active channels and 128 in total – Can use the same 16 ch. as T and R or 16 ch. as T and 16 others as R – OmniScan PA connector + 2 BNC

1343-01-0015 ZPA-UIT-OMNISCAN-32/128-MOD OmniScan PA 32/128 Module – Up to 32 simult. active channels and 128 in total – OmniScan PA connector

1343-01-0020 ZPA-UIT-OMNISCAN-32/128PR-MOD OmniScan PA 32/128PR Module – Up to 32 simult. active channels and 128 in total – Can use the same 32 ch. as T and R or 32 ch. as T and 32 others as R – OmniScan PA connector

Ordering Information > OmniScan PA

8 > UT > Systems > OmniScan PA

UT > SYSTEMS

UT > Systems > OmniScan PA > 9

1340-00-1610 ZPA-UIT-OMNISCAN-16/128-KIT OmniScan PA System Kit with 16/128 Module – Up to 16 simult. active channels and 128 in total – OmniScan PA connector + 2 BNC – includes accessory kit OMNI-A-ACC1

1340-00-1620 ZPA-UIT-OMNISCAN-16/128PR-KIT OmniScan PA System Kit with 16/128PR module – Up to 16 simult. active channels and 128 in total – Can use the same 16 ch. as T and R or 16 ch. as T and 16 others as R – OmniScan PA connector + 2 BNC – includes accessory kit OMNI-A-ACC1

1340-00-3210 ZPA-UIT-OMNISCAN-32/128-KIT OmniScan PA System Kit with 32/128 Module – Up to 32 simult. active channels and 128 in total – OmniScan PA connector – includes accessory kit OMNI-A-ACC1

1340-00-3220 ZPA-UIT-OMNISCAN-32/128PR-KIT OmniScan PA System Kit with 32/128PR Module – Up to 32 simult. active channels and 128 in total – Can use the same 32 ch. as T and R or 32 ch. as T and 32 others as R – OmniScan PA connector – includes accessory kit OMNI-A-ACC1

10021834 ZPA-UIT-OMNISCAN-16/16-MAN-KIT1 OmniScan PA System Kit 1, with 16/16 Module for manual inspection (no encoder capability), 5L16-A10 PA probe and wedge SA10-N55S – includes: AC Adapter, 1 battery, small carrying case, 1GB CompactFlash card and reader


New item ZPA-UIT-OMNISCAN-16/16-MAN-KITW1 OmniScan PA System Kit W1, with 16/16 Module for manual inspection (no encoder capability), with 1 UT channel, 5L16-A10 PA probe, SA10-N55S wedge, weld software option, AC adapter, 1 battery, small carrying case, 2GB CompactFlash

New item ZPA-UIT-OMNISCAN-16/16-MAN-KITW2 OmniScan PA System Kit W2, with 16/16 Module for manual inspection (no encoder capability), with 1 UT channel, 2L8-DGS PA probe, weld software option, AC adapter, 1 battery, small carrying case, 2GB CompactFlash


New item ZPA-UIT-OMNISCAN-16/16-MAN-KITW4 OmniScan PA System Kit W4, with 16/16 Module for manual inspection (no encoder capability), with 1 UT channel, 2.25L16-AWS PA probe, AWS wedge, weld software option, AC adapter, 1 battery, small carrying case, 2GB CompactFlash


New item ZPA-UIT-OMNISCAN-16/64-MAN-KITW1 OmniScan PA System Kit W1, with 16/64 Module for manual inspection (no encoder capability), with 1 UT channel, 5L16-A10 PA probe, SA10-N55S wedge, weld software option, AC adapter, 1 battery, small carrying case, 2GB CompactFlash




1340-60-0030 ZGN-ACC-OMNISCAN-AC OmniScan AC adapter

10024396 ZGN-ACC-OMNISCAN-ACC1 OMNI-A-ACC1 - OmniScan accessory kit, including: 1 extra battery, 1 battery charger, 1 USB fl exible keyboard, 1 USB optical mouse, 1 backstrap

1340-60-0010 ZGN-ACC-OMNISCAN-BATT OmniScan extra battery pack

1340-60-0060 ZGN-ACC-OMNISCAN-BST Backstrap for OmniScan systems

Accessories and documentation > OmniScan PA

UT > SYSTEMS

10 > UT > Systems > OmniScan PA

New item ZPA-UIT-OMNISCAN-16/64-MAN-KITW4 OmniScan PA System Kit W4, with 16/64 Module for manual inspection (no encoder capability), with 1 UT channel, 2.25L16-AWS PA probe, AWS wedge, weld software option, AC adapter, 1 battery, small carrying case, 2GB CompactFlash

10024409 ZPA-UIT-OMNISCAN-16/16-MAN-MOD OmniScan PA 16/16 Module for manual inspection (no encoder capability)

New item ZPA-UIT-OMNISCAN-16/16-MAN-W-MOD OmniScan PA 16/16 Module for manual inspection (no encoder capability), with weld software option

10024402 ZPA-UIT-OMNISCAN-16/64-MAN-MOD OmniScan PA 16/64 Module for manual inspection (no encoder capability)

New item ZPA-UIT-OMNISCAN-16/64-MAN-W-MOD OmniScan PA 16/64 Module for manual inspection (no encoder capability), with weld software option

10021833 ZPA-UIT-OMNISCAN-16/16-MAN OmniScan PA System with 16/16 Module for manual inspection (no encoder capability) – OmniScan PA connector + 2 BNC – includes: AC Adapter, 1 battery, small carrying case, 2GB CompactFlash card and reader

New item ZPA-UIT-OMNISCAN-16/16-MAN-W OmniScan PA System with 16/16 Module for manual inspection (no encoder capability) – OmniScan PA connector + 2 BNC – with weld software option – includes: AC Adapter, 1 battery, small carrying case, 2GB CompactFlash card and reader

10021836 ZPA-UIT-OMNISCAN-16/64-MAN OmniScan PA System with 16/64 Module for manual inspection (no encoder capability) – OmniScan PA connector + 2 BNC – includes: AC Adapter, 1 battery, small carrying case, 2GB CompactFlash card and reader

New item ZPA-UIT-OMNISCAN-16/64-MAN-W OmniScan PA System with 16/64 Module for manual inspection (no encoder capability) – OmniScan PA connector + 2 BNC – with weld software option – includes: AC Adapter, 1 battery, small carrying case, 2GB CompactFlash card and reader

10024403 ZPA-UIT-OMNISCAN-16/64PR-MAN-MOD OmniScan PA 16/64PR Module for manual inspection (no encoder capability) – Can use the same 16 ch. as T and R or 16 ch. as T and 16 others as R

10024404 ZPA-UIT-OMNISCAN-16/64PR-MAN OmniScan PA System with 16/64PR Module for manual inspection (no encoder capability) – Can use same 16 ch. as T/R, or 16 ch. T and 16 others R – OmniScan PA connector + 2 BNC – includes AC Adapter, 1 battery, small carrying case, 2GB Flash card and reader

1343-01-0001 ZPA-UIT-OMNISCAN-MX OmniScan MX Basic Mainframe Confi guration – includes 1 AC Adapter, 1 battery, Ethernet 100BaseT cable, small carrying case, 1GB CompactFlash card, CompactFlash Reader


UT > SYSTEMS

UT > Systems > OmniScan PA > 11

1340-92-0030 ZGN-ACC-OMNISCAN-CFM-2GB Flash card 2 GB, Lexar Media Professional, high quality, high speed

1340-91-0010 ZGN-ACC-OMNISCAN-CFR Flash card reader

1340-60-0020 ZGN-ACC-OMNISCAN-CHRG OmniScan external battery charger

New item ZGN-ACC-OMNISCAN-DEMOBLK-AL Phased array demonstration block in Aluminum with various types kinds of refl ectors (MESX183B)

10024390 ZGN-ACC-OMNISCAN-EXHD80GB External hard drive storage device, 80 GB – Compatible with OmniScan systems

1340-93-0020 ZGN-ACC-OMNISCAN-KEYB USB fl exible keyboard (virtually indestructible: splash proof and shockproof) – Compatible with OmniScan systems

10030852 ZGN-ACC-OMNISCAN-LHCASE Large black hard carrying case (24-9/16 in. × 19-5/16 in. × 11-15/16 in. / 62.4 cm × 49 cm × 30.3 cm) – Case is large enough to carry the OmniScan PA Unit, its accessories and some probes

1340-93-0010 ZGN-ACC-OMNISCAN-OMSE USB optical mouse – Compatible with OmniScan systems

1340-93-0030 ZGN-ACC-OMNISCAN-PRINTBATT HP small portable battery-operated color ink jet printer – Compatible with OmniScan systems

1340-96-0010 ZGN-ACC-OMNISCAN-SHCASE Small black hard carrying case (19-1/8 in. × 15-7/16 in. × 7-9/16 in. / 48.6 cm × 39.2 cm × 19.2 cm) – is included in all OmniScan PA System Kits

10024393 ZGN-ACC-OMNISCAN-EXTM02 Extended memory option (RAM) from 128 MB to 256 MB on OmniScan mainframe OMNI-MX (for systems sold at this time, this option is already included)

1340-60-0040 ZPA-ACC-OMNISCAN-TESTCONN Phased array test connector for OmniScan PA – Includes software setup

1340-08-0001 ZPA-RDT-OMNISCAN-MX-DOC-EN OmniScan MX User's Manual – English

1340-08-0004 ZPA-RDT-OMNISCAN-PA-DOC-EN OmniScan PA Software User's Manual – English

1340-30-0010 ZPA-ACC-OMNISCAN-ADP01 Adapter Cable for Encoders (OmniScan to Z-Scan UT) – Bendix 18 pins to DE15 – Compatible with Tomoscan III system when used with T3-Cable-ADP-ENC

1340-30-0020 ZPA-ACC-OMNISCAN-ADP03 Adapter Box – Connect one Hypertronics PA probe connector (128 con.) to the OmniScan

1340-30-0030 ZPA-ACC-OMNISCAN-ADP04 Adapter Box – Connect OmniScan connector of phased array probe to a Tomoscan III PA Hypertronics connector

10024398 ZPA-ACC-OMNISCAN-ADP05 Y adapter with OmniScan PA connector support 2 phased array probes with OmniScan PA connector – Required for multiple probe capability with OmniScan PA or Z-Scan PA systems

10024391 ZGN-ACC-OMNISCAN-ADP09 Encoder cable adapter (10 m) from MCDU-02 Encoder OUT to OmniScan equipment

10024401 ZPA-ACC-OMNISCAN-MGROUP Multigroup option for OmniScan phased array software versions 1.4 or 2.0

1343-03-0001 ZUT-ACC-OMNISCAN-TOFD OmniScan TOFD acquisition and analysis software option – Includes calibration tools, cursors, sizing, hyperbolic cursors, and lateral wave synchronization.

New item ZPA-ACC-OMNISCAN-WELD Weld software option for OmniScan phased array

Accessories and documentation > OmniScan PA

UT > SYSTEMS

Tomoscan III UT

High-performance multi-channel conventional > UT system for remote controlled data acquisition

Setup, data acquisition and data analysis using > UltraVision® 1 running on PC

Allows for connection to 6 encoders, with 2 encoders > simultaneously active

The Tomoscan III UT system has a world-wide reputation of reliability, performance and fl exibility for high-end conventional UT applications. It interfaces with virtually any manipulator used in typical in-service inspections such as on reactor pressure vessels, CRDM head penetrations, and pipe welds.

1330-00-0810 ZUT-RDT-TOMO3-8CH-PIM301 Tomoscan III UT system, 8 UT channels, 1 processor board – Lemo00 connectors – includes encoder adapter cable T3-Cable-ADP-ENC

1330-00-0811 ZUT-RDT-TOMO3-8CH-ECT-PIM304 Tomoscan III UT system, 8 UT channels, 1 processor board – Lemo00 connectors – Eddy current option: 4 hardware ECT input channels, up to 8 ECT frequencies, up to 16 timeslots and standard 41-pin ECT connector – includes encoder cable T3-Cable-ADP-ENC

1330-00-1610 ZUT-RDT-TOMO3-16CH-1P-PIM302 Tomoscan III UT system, 16 UT channels, 1 processor board – Lemo00 connectors – includes encoder adapter cable T3-Cable-ADP-ENC

1330-00-1611 ZUT-RDT-TOMO3-16CH-2P-PIM302 Tomoscan III UT system, 16 UT channels, 2 processor board – Lemo00 connectors – includes encoder adapter cableT3-Cable-ADP-ENC

1330-001620 ZUT-RDT-TOMO3-16CH-1P-ECT-PIM305 Tomoscan III UT system, 16 UT channels, 1 processor board – Lemo00 connectors – Eddy current option: 4 hardware ECT input channels, up to 8 ECT frequencies, up to 16 timeslots and standard 41-pin ECT connector – includes encoder cable T3-Cable-ADP-ENC

1330-00-1621 ZUT-RDT-TOMO3-16CH-2P-ECT-PIM305 Tomoscan III UT system, 16 UT channels, 2 processor board – Lemo00 connectors – Eddy current option: 4 hardware ECT input channels, up to 8 ECT frequencies, up to 16 timeslots and standard 41-pin ECT connector – includes encoder cable T3-Cable-ADP-ENC

1330-00-3210 ZUT-RDT-TOMO3-32CH-2P-PIM303 Tomoscan III UT system, 32 UT channels, 2 processor board – Lemo00 connectors – includes encoder adapter cable T3-Cable-ADP-ENC

Ordering Information > Tomoscan III UT

12 > UT > Systems > Tomoscan III UT

UT > SYSTEMS

UT > Systems > Tomoscan III UT > 13

1330-08-0001 ZUT-RDT-TOMO3-DOC-EN Tomoscan III UT User's Manual – English

Accessories and documentation > Tomoscan III UT

1330-00-3211 ZUT-RDT-TOMO3-32CH-2P-ECT-PIM306 Tomoscan III UT system, 32 UT channels, 2 processor board – Lemo00 connectors – Eddy current option: 4 hardware ECT input channels, up to 8 ECT frequencies, up to 16 timeslots and standard 41-pin ECT connector – includes encoder cable T3-Cable-ADP-ENC

Ordering Information > Tomoscan III UT

UT > SYSTEMS

Z-Scan® UT

Flexible, high performance multi-channel UT system > for remote controlled data acquisition

Supports pulse-echo and/or TOFD inspections>

High pulsing rate and data throughput>

Linear and logarithmic amplifi ers>

Supports 2 encoders simultaneously>

Sealed enclosure for easier use and maintenance > in contaminated areas

Zetec’s Z-Scan UT is a powerful, fl exible, and compact multi-channel conventional UT system for remote controlled data acquisition. This high-end acquisition system interfaces with Zetec scanners and standard PCs through the UltraVision® 1 software, for excellent data acquisition and analysis capabilities.

1350-00-2021 ZUT-RDT-ZSCAN-2CH-LEMO Z-Scan UT system, 2 conventional UT channels – 2 pulsers and 2 receivers – with Lemo00 connectors – includes transport case

1350-00-2022 ZUT-RDT-ZSCAN-2CH-BNC Z-Scan UT system, 2 conventional UT channels – 2 pulsers and 2 receivers – with BNC connectors – includes transport case


1350-00-0042 ZUT-RDT-ZSCAN-4CH-LEMO-R Z-Scan UT system, 4 conventional UT channels – 8 pulsers and 8 receivers – with Lemo00 connectors – includes transport case – compatible with remote P/R of Tomo S/V


1350-00-0044 ZUT-RDT-ZSCAN-4CH-BNC-R Z-Scan UT system, 4 conventional UT channels – 8 pulsers and 8 receivers – with BNC connectors – includes transport case – compatible with remote P/R of Tomo S/V


1350-00-0082 ZUT-RDT-ZSCAN-8CH-LEMO-R Z-Scan UT system, 8 conventional UT channels – 8 pulsers and 8 receivers – with Lemo00 connectors – includes transport case – compatible with remote P/R of Tomo S/V


Ordering Information > Z-Scan UT

14 > UT > Systems > Z-Scan UT

UT > SYSTEMS

UT > Systems > Z-Scan UT > 15

1350-00-0084 ZUT-RDT-ZSCAN-8CH-BNC-R Z-Scan UT system, 8 conventional UT channels – 8 pulsers and 8 receivers – with BNC connectors – includes transport case – compatible with remote P/R of Tomo S/V

10024389 ZUT-RDT-ZSCAN-DOC-EN Z-Scan UT User's Manual – English

Ordering Information > Z-Scan UT

Accessories and documentation > Z-Scan UT

UT > SYSTEMS

OmniScan® UT

Battery operated multi-channel system for > pulse-echo and TOFD inspections

Splash proof, shockproof, and easy to clean>

Multi-channel UT operation>

On-board analysis capabilities>

UltraVision® 1 data analysis support>

The OmniScan UT offers fairly high acquisition rates and interesting software features in a portable, modular mainframe. It effi ciently performs manual as well as fully-automated conventional UT inspections.

The OmniScan’s solid casing and rubber bumpers make it a rugged instrument that withstands drops and shocks. It can be carried easily and used in harsh fi eld conditions, indoors or outdoors, and operates during eight hours on its two Li-ion batteries.

The 8.4-inch display has a SVGA resolution of 800 × 600. A scroll knob and function keys make it easy to browse through and select functions. This display is clearly legible and allows you to see defects and details under any light conditions. Mouse and keyboard support is included.

The OmniScan offers the standard PC ports: USB, RS-232, SVGA out, and Ethernet™. It offers data storage capability via a CF (CompactFlash®) card slot or USB devices.

(OmniScan is a trademark of R/D Tech.)

1343-01-0025 ZUT-UIT-OMNISCAN-2CH-MOD OmniScan UT Module – 2 conventional UT channels – 2 Lemo00 UT connectors – includes basic UT software but not the TOFD package

10021840 ZUT-UIT-OMNISCAN-4CH-MOD OmniScan UT Module – 4 conventional UT channels – 4 Lemo00 UT connectors – includes basic UT software but not the TOFD package

10021841 ZUT-UIT-OMNISCAN-8CH-MOD OmniScan UT Module – 8 conventional UT channels – 8 Lemo00 UT connectors – includes basic UT software but not the TOFD package

1342-00-0021 ZUT-UIT-OMNISCAN-2CH OmniScan UT system, 2 conventional UT channels – 2 Lemo00 UT connectors – includes basic UT software but not the dedicated TOFD package – includes accessory kit OMNI-A-ACC1

Ordering Information > OmniScan UT

16 > UT > Systems > OmniScan UT

UT > SYSTEMS

UT > Systems > OmniScan UT > 17

10021838 ZUT-UIT-OMNISCAN-4CH OmniScan UT system, 4 conventional UT channels – 4 Lemo00 UT connectors – includes basic UT software but not the dedicated TOFD package – includes accessory kit OMNI-A-ACC1

10021839 ZUT-UIT-OMNISCAN-8CH OmniScan UT system, 8 conventional UT channels – 8 Lemo00 UT connectors – includes basic UT software but not the dedicated TOFD package – includes accessory kit OMNI-A-ACC1


1340-60-0030 ZGN-ACC-OMNISCAN-AC OmniScan AC adapter

10024396 ZGN-ACC-OMNISCAN-ACC1 OMNI-A-ACC1 – OmniScan accessory kit, including: 1 extra battery, 1 battery charger, 1 USB fl exible keyboard, 1 USB optical mouse, 1 backstrap

1340-60-0010 ZGN-ACC-OMNISCAN-BATT OmniScan extra battery pack

1340-60-0060 ZGN-ACC-OMNISCAN-BST Backstrap for OmniScan systems


1340-91-0010 ZGN-ACC-OMNISCAN-CFR Flash card reader

1340-60-0020 ZGN-ACC-OMNISCAN-CHRG OmniScan external battery charger

10024390 ZGN-ACC-OMNISCAN-EXHD80GB External hard drive storage device, 80 GB – Compatible with OmniScan systems

1340-93-0020 ZGN-ACC-OMNISCAN-KEYB USB fl exible keyboard (virtually indestructible: splash proof and shockproof) – Compatible with OmniScan systems

10030852 ZGN-ACC-OMNISCAN-LHCASE Large black hard carrying case (24-9/16 in. × 19-5/16 in. × 11-15/16 in. / 62.4 cm × 49 cm × 30.3 cm) – Case is large enough to carry the OmniScan PA Unit, its accessories and some probes

1340-93-0010 ZGN-ACC-OMNISCAN-OMSE USB optical mouse – Compatible with OmniScan systems

1340-93-0030 ZGN-ACC-OMNISCAN-PRINTBATT HP small portable battery-operated color ink jet printer – Compatible with OmniScan systems

1340-96-0010 ZGN-ACC-OMNISCAN-SHCASE Small black hard carrying case (19-1/8 in. × 15-7/16 in. × 7-9/16 in. / 48.6 cm × 39.2 cm × 19.2 cm) – is included in all OmniScan PA System Kits

10024393 ZGN-ACC-OMNISCAN-EXTM02 Extended memory option (RAM) from 128 MB to 256 MB on OmniScan mainframe OMNI-MX (for systems sold at this time, this option is already included)

1340-08-0001 ZPA-RDT-OMNISCAN-MX-DOC-EN OmniScan MX User's Manual – English

1340-30-0010 ZPA-ACC-OMNISCAN-ADP01 Adapter Cable for Encoders (OmniScan to Z-Scan UT) – Bendix 18 pins to DE15 – Compatible with Tomoscan III system when used with T3-Cable-ADP-ENC

Ordering Information > OmniScan UT

Accessories and documentation > OmniScan UT

UT > SYSTEMS

18 > UT > Systems > OmniScan UT

10024391 ZGN-ACC-OMNISCAN-ADP09 Encoder cable adapter (10 m) from MCDU-02 Encoder OUT to OmniScan equipment


Accessories and documentation > OmniScan UT

UT > SOFTWARE

UltraVision® 3

User interface similar to UltraVision® 1>

3D work environment, with native support of > complex components

Online and offl ine analysis capabilities>

Support for both DYNARAY (*.UVData) and legacy > fi le formats (*.DAT, *.RDT, *.OPD)

Support for data fi les up to 20 GB>

Open architecture>

Zetec’s new UltraVision 3 software is a comprehensive ultrasound testing (UT) inspection management package.

UltraVision 3 allows you to design conventional and phased array UT probes, and to effi ciently evaluate their acoustic beam characteristics. It supports the development of inspection techniques, and the assessment of global inspection coverage.

During inspections, UltraVision 3 manages UT signal acquisition from the DYNARAY® phased array system. The new 3-D features include the creation and import of complex components, as well as the visualization of acoustic fi eld data and the actual examination data from those components.

The graphical and numerical features made available in UltraVision 3 allow for fast and reliable interpretation of the acquired phased array UT signals. UltraVision 3 also provides tools to accurately measure the length and through-wall size of fl aws, even in challenging inspection confi gurations.

After analysis, UltraVision 3 provides all the necessary tools to perform effi cient and thorough reporting of inspection parameters and analysis results. UltraVision 3 is fully compatible with previous versions of UltraVision and will generate the same analysis results.

An ideal tool for either challenging onsite inspections or innovative lab work, UltraVision 3 runs on both Microsoft® Windows® XP Professional and Windows Vista. It performs effi ciently on laptop computers and on high-end desktop workstations.

10024700 ZPA-SWS-UV-3-BASIC-USB UltraVision 3 Software – Basic Version – USB Hard Key – Ultrasound data acquisition and analysis software, supports basic phased array applications with DYNARAY system

10024701 ZPA-SWS-UV-3-ADV-USB UltraVision 3 Software – Advanced Version – USB Hard Key – Ultrasound data acquisition and analysis software, supports advanced phased array applications with DYNARAY system

Ordering Information > UltraVision 3

UT > Software > UltraVision 3 > 19

UT > SOFTWARE

20 > UT > Software > UltraVision 3

10024702 ZPA-SWS-UV-3-D-USB UltraVision 3 Software – 3D Version – USB Hard Key – Ultrasound data acquisition and analysis software, supports advanced phased array applications and 3D data visualization with DYNARAY system

10024712 ZPA-SWS-UV-3-DOC1-EN UltraVision 3.0 Reference Manual – Volume 1: Installation Guide – English

10024713 ZPA-SWS-UV-3-DOC2-EN UltraVision 3.0 Reference Manual – Volume 2: Getting Started – English

10024714 ZPA-SWS-UV-3-DOC3-EN UltraVision 3.0 Reference Manual – Volume 3: Setup & Inspecton – English

10024715 ZPA-SWS-UV-3-DOC4-EN UltraVision 3.0 Reference Manual – Volume 4: Analysis & Reporting – English

10024720 ZPA-SWS-ZADPAC-3-DOC1-EN Zetec Advanced PA Calculator 3.0 Reference Manual – Volume 1: Installation Guide – English

10024721 ZPA-SWS-ZADPAC-3-DOC2-EN Zetec Advanced PA Calculator 3.0 Reference Manual – Volume 2: User Guide – English


Documentation > UltraVision 3

UT > SOFTWARE

UltraVision® 1

Drives ALL Zetec UT & PA equipments, except DYNARAY>

Compatible with *.DAT and *.RDT fi les, back to 1992>

Evolution of TomoView 2.2 (equivalency demonstrated > & documented in white paper)

Zetec’s UltraVision 1 software is a powerful and versatile software package that manages acquisition of phased array and conventional UT signals combined with real-time imaging of these signals, as well as offl ine analysis of previously acquired data fi les.

UltraVision 1 software drives the phased array units (Tomoscan III PA, Tomoscan FOCUS, OmniScan* PA, and Z-Scan PA) as well as the conventional UT systems (μTomoscan, Tomoscan III UT and Z-Scan UT), and it supports every fi le format generated by these systems. It is fully compatible with previous TomoView versions and will generate the same analysis results.

An ideal tool for either onsite inspections or lab work, it operates with Microsoft® Windows® 2000, Windows XP, and Windows Vista. UltraVision operates effi ciently on small laptop computers as well as high-end desktop workstations.

Two versions are available. The Basic version, destined for generic applications, and the Full version that includes advanced features such as assisted analysis, geometrical echo removal, probe characterization, and the Advanced phased array calculator with acoustic beam simulation.

10031071 ZPA-SWS-UV-1-BASIC-USB UltraVision 1 Software – Basic Version – USB Hard Key-Ultrasound data acquisition and analysis software, supports all phased array and conventional UT applications

10031072 ZPA-SWS-UV-1-FULL-USB UltraVision 1 Software – Full Version – USB Hard Key-Ultrasound data acquisition and analysis software, supports all phased array and conventional UT applications

10024724 ZPA-SWS-UV-1-DOC1-EN UltraVision 1 Reference Manual – Volume 1: General Features, Setup and Data Acquisition – English

10024725 ZPA-SWS-UV-1-DOC2-EN UltraVision 1 Reference manual – Volume 2: Analysis and Reporting – English

10024728 ZPA-SWS-ZADPAC-1-DOC-EN Zetec Advanced PA Calculator 1 Reference Manual – English


Documentation > UltraVision 1

UT > Software > UltraVision 1 > 21

UT > SOFTWARE

Zetec Advanced PA Calculator

Generates focal law fi les (*.law) compatible with all > Zetec PA systems, including DYNARAY

Facilitates the design and implementation of phased > array examination techniques

Performs acoustic beam simulations for various array > probe types

PC-based software, runs under Windows 2000, XP, > or Vista

Available standalone or integrated in UltraVision® Full>

The Zetec Advanced PA Calculator simplifi es the design and implementation of phased array applications with tools for rapid and effi cient generation, visualization and optimization of focal laws. It supports 1D linear arrays as well as 2D matrix arrays on fl at and cylindrical specimens in both pulse-echo and transmit-receive confi gurations.

This Advanced PA Calculator allows you to generate focal law delays. The graphical display of probe confi gurations enables you to verify and validate the inputs and resulting focal laws for any of the supported types of arrays. Detailed numerical information for each of the created delay laws includes position of beam exit point and focal point, beam refracted angle, and skew angle.

10027949 ZPA-SWS-ZADPAC-1-USB Zetec Advanced PA Calculator 1 – USB Hard Key – Focal law generation, acoustic beam simulation and visualization tool – Supports 1D linear arrays, 2D matrix arrays, 1D circular arrays, 1D Annular arrays, Tandem confi guration, weld overlays

10024710 ZPA-SWS-ZADPAC-MAINT Yearly maintenance fee for Zetec Advanced PA Calculator – includes software upgrades, documentation upgrades, remote support

10024728 ZPA-SWS-ZADPAC-1-DOC-EN Zetec Advanced PA Calculator 1 Reference Manual – English

10024721 ZPA-SWS-ZADPAC-3-DOC2-EN Zetec Advanced PA Calculator 3.0 Reference Manual – Volume 2: User Guide – English

Ordering Information > Zetec Advanced PA Calculator

Documentation > Zetec Advanced PA Calculator

22 > UT > Software > Zetec Advanced PA Calculator

UT > SOFTWARE

UltraVision Software Upgrades and Maintenance

Zetec is committed to improving the reliability of the UltraVision software and introducing new features that will help you perform better and more effi cient UT and Phased Array inspections.

The UltraVision Software Service Program (SSP) has been introduced to allow you to continuously benefi t from the evolution of the software. The program includes:

> Free access to all minor and major releases for the product version currently owned (Basic, Full/Advanced or 3D)

> Free access to all documentation updates, including user manuals, information concerning limitations and remaining anomalies (via our website), and specifi c Product Bulletins that notify you if any software problems are identifi ed that might affect the validity of examination results

> Free and unlimited remote support by phone or e-mail, related to the use of the software and to investigation of potential anomalies and workarounds. Typically this includes reproducing an inspection setup or analysis confi guration to investigate a specifi c diffi culty, documenting a specifi c operation or workaround, including a customer confi guration in the generic test program, etc. This does not include inspection technique development with the software.

The purchase of any new UltraVision license automatically gives access to a 12 month SSP, free of charge.

10029457 ZPA-SWS-UV-1-BASIC-SSP Annual fee for Software Service Program for UltraVision 1 – Basic Version – includes software upgrades, documentation upgrades, remote support

10027661 ZPA-SWS-UV-1-FULL-SSP Annual fee for Software Service Program for UltraVision 1 – Full Version – includes software upgrades, documentation upgrades, remote support

10024703 ZPA-SWS-UV-1-BASIC-USB-UPG TV Upgrade from TomoView 1.4 or 2.2 to UltraVision 1 – Basic Version – includes annual fee for Software Service Program for UltraVision 1 – Basic Version

10024704 ZPA-SWS-UV-1-FULL-USB-UPG TV Upgrade from TomoView 1.4 or 2.2 to UltraVision 1 – Full Version – includes annual fee for Software Service Program for UltraVision 1 – Full Version

10024707 ZPA-SWS-UV-1-FULL-USB-UPG BASIC Upgrade from UltraVision 1 – Basic Version to UltraVision 1 – Full Version

10030505 ZPA-SWS-UV-3-BASIC-SSP Annual fee for Software Service Program for UltraVision 3 – Basic Version – includes software upgrades, documentation upgrades, remote support

10030506 ZPA-SWS-UV-3-ADV-SSP Annual fee for Software Service Program for UltraVision 3 – Advanced Version – includes software upgrades, documentation upgrades, remote support

10030507 ZPA-SWS-UV-3-D-SSP Annual fee for Software Service Program for UltraVision 3 – 3D Version – includes software upgrades, documentation upgrades, remote support

10027360 ZPA-SWS-UV-3-BASIC-USB-UPG TV Upgrade from TomoView 1.4 or 2.2 to UltraVision 3 – Basic Version – includes annual fee for Software Service Program for UltraVision 3 – Basic Version

Ordering Information > UltraVision Software Upgrades and Maintenance

UT > Software > UltraVision Software Upgrades and Maintenance > 23

UT > SOFTWARE

24 > UT > Software > UltraVision Software Upgrades and Maintenance

10027361 ZPA-SWS-UV-3-ADV-USB-UPG TV Upgrade from TomoView 1.4 or 2.2 to UltraVision 3 – Advanced Version – includes annual fee for Software Service Program for UltraVision 3 – Advanced Version

10027362 ZPA-SWS-UV-3-D-USB-UPG TV Upgrade from TomoView 1.4 or 2.2 to UltraVision 3 – 3D Version – includes annual fee for Software Service Program for UltraVision 3 – 3D Version

10027368 ZPA-SWS-UV-3-ADV-USB-UPG BASIC Upgrade from UltraVision 3 – Basic version to UltraVision 3 – Advanced Version

10027369 ZPA-SWS-UV-3-D-USB-UPG BASIC Upgrade from UltraVision 3 – Basic version to UltraVision 3 – 3D Version

10027370 ZPA-SWS-UV-3-D-USB-UPG ADV Upgrade from UltraVision 3 – Advanced version to UltraVision 3 – 3D Version

Ordering Information > UltraVision Software Upgrades and Maintenance

UT > SCANNERS AND MOTOR CONTROLLERS

Manual Pipe Scanner

Manually driven pipe scanner>

Lightweight device (<7 lbs)>

Rapid installation by a single operator, requiring > no tools

Multiple link design, compatible with pipe diameters > from 4” NPS and up

Spring-loaded probe interface>

Two encoders, for both one-line and bidirectional scans>

Adjustable extension, compatible with > conical geometry

Bubble level for circumferential referencing>

The Manual Pipe Scanner is a mechanism for rapid ultrasonic examination of various pipe weld confi gurations with either phased array or conventional UT techniques. It is compatible with all Zetec UT and Phased Array equipments.

1372-00-0001 ZGN-SCN-MPS-KIT4-16IN Manual Pipe Scanner – standard kit – lightweight, modular, easy to use – 2 encoders for bidirectional scanning – compatible with pipe diameters from 4" to 16"

1372-70-0010 ZGN-SCN-MPS-XLL16-26IN Manual Pipe Scanner – Extra Long Links Set – 16 to 26 inches


10024441 ZGN-SCN-MPS-ROD330MM Manual Pipe Scanner – Long Translation Rod Set (330 mm)

10024442 ZGN-SCN-MPS-ROD200MM Manual Pipe Scanner – Nominal Translation Rod Set (200 mm)

1372-70-0020 ZGN-SCN-MPS-ROD100MM Manual Pipe Scanner – Short Translation Rod Set (100 mm)

1372-70-0021 ZGN-SCN-MPS-ROD0MM Manual Pipe Scanner – Extra Short Translation Rod Set (0 mm) for one-line circumferential scanning – maximum width of scanner is less than 102 mm

1372-70-0030 ZGN-SCN-MPS-MAGWHEELS Manual Pipe Scanner – Set of Six Magnetic Wheels – add on to actual wheels and allow the scanner to function on fl at surface

1372-70-0035 ZGN-SCN-MPS-LASERHOLD Manual Pipe Scanner – Laser Holder – for axial positioning

1372-70-0040 ZGN-SCN-MPS-EXT100MM Manual Pipe Scanner – 100 mm Extension – increases the axial range and allow inspections on conical geometries (15 degrees)

Ordering Information > Manual Pipe Scanner

UT > Scanners and Motor Controllers > Manual Pipe Scanner > 25


26 > UT > Scanners and Motor Controllers > Manual Pipe Scanner

10024443 ZGN-SCN-MPS-FIXT90DEG Manual Pipe Scanner – 90 degree fi xture – allows to mechanically skew the phased array probe by 90 degrees

10030493 ZGN-SCN-MPS-UNIVERSALFORK Manual Pipe Scanner – Universal fork

10024445 ZGN-SCN-MPS-TOFDLINK Manual Pipe Scanner – dedicated carriage for TOFD inspections using one-line scanning

10027221 ZGN-SCN-MPS-CIRC-MOT Manual Pipe Scanner – dedicated motorized link for circumferential movement – can be controlled by MPSU-01

10028483 ZGN-SCN-MPS-CIRC-GUIDE Manual Pipe Scanner – modular chain guide set (pipe diameters from 4" to 36") and guiding link – highly recommended for more accurate scanner movement on all vertical pipes and large horizontal pipes

New item ZGN-SCN-MPS-ENC Manual Pipe Scanner – Spare encoder

1372-70-0050 ZGN-SCN-MPS-CBLZSCAN Manual Pipe Scanner – Encoder Cable – compatible with Z-Scan, Tomoscan III and DYNARAY systems

1372-70-0051 ZGN-SCN-MPS-CBLOMNI Manual Pipe Scanner – Encoder Cable- compatible with OmniScan

10024446 ZUT-SCN-MPS-SPARE-KIT1 Manual Pipe Scanner – Screw spare kit

10024447 ZUT-SCN-MPS-SPARE-KIT2 Manual Pipe Scanner – Ball plunger spare kit

10024448 ZUT-SCN-MPS-SPARE-KIT3 Manual Pipe Scanner – Gear spare kit

10024449 ZUT-SCN-MPS-SPARE-KIT4 Manual Pipe Scanner – Bearing spare kit

10024450 ZUT-SCN-MPS-SPARE-KIT5 Manual Pipe Scanner – O-Ring spare kit (10 units)

Ordering Information > Manual Pipe Scanner


Mouse Scanner

Manually driven wheel encoder>

Very lightweight device>

Spring-loaded probe interface >

Extremely suited for “expertise” type examination > (fl aw sizing and/or characterization), where encoded scanning is required

The Mouse Scanner is a miniature scanning mechanism specifi cally designed for one-line phased array inspection sequences in various confi gurations with limited access.

1373-00-0001 ZGN-SCN-MOUSE-KIT-OMNI Mouse Scanner – Standard Kit – Small hand-held mouse-like scanner – Including universal fork – encoder cable compatible with OmniScan

10024467 ZGN-SCN-MOUSE-DYN Mouse Scanner – Standard Kit – Small hand-held mouse-like scanner – Including universal fork – encoder cable compatible with Z-Scan UT, Z-Scan PA, DYNARAY

Ordering Information > Mouse Scanner

UT > Scanners and Motor Controllers > Mouse Scanner > 27


Automated Pipe Scanner (APS)

For pipe diameters from 4” to 20” NPS>

Rapid installation by a single operator, requiring > no tools

“Static” arm can carry two PA probes for > circumferential scanning

“Motorized arm” for bidirectional scanning sequences>

Umbilical cable for motor and encoder signals, video > and audio connections, water coupling

Robust spring-loaded probe interface >

The APS is designed for rapid ultrasonic examination of various pipe weld confi gurations with either phased array or conventional UT techniques. This scanning mechanism is well suited for inspections in high-radiation environment such as reactor coolant piping and auxiliary piping in nuclear power plants. It is compatible with all Zetec UT and phased array equipments. Optional low-power laser and video camera are available for remote reference setting and position monitoring.

1374-00-0001 ZGN-SCN-APS-1AXIS Automated UT Pipe Scanner – Single Axis (Static Arm for 2 PA probes) – Motorized and encoded – Includes control box for electrical connections – Track and Umbilical cable not included – Compatible with tracks for pipe inspection from 4" to 26" OD

1374-00-0002 ZGN-SCN-APS-2AXIS Automated UT Pipe Scanner – Two Axis (Scanning Arm for 1 PA probe) – Motorized and encoded – Includes control box for electrical connections – Track and Umbilical cable not included – Compatible with tracks for pipe inspection from 4" to 26" OD

1374-70-0001 ZGN-SCN-APS-TRACK4-7IN Automated UT Pipe Scanner – Track D1 – Stainless Steel Track and Ring, diameter range 4 to 7 inches





Ordering Information > Automated Pipe Scanner (APS)

28 > UT > Scanners and Motor Controllers > Automated Pipe Scanner (APS)


UT > Scanners and Motor Controllers > Automated Pipe Scanner (APS) > 29

1374-70-0010 ZGN-SCN-APS-UMBILICAL10M Automated UT Pipe Scanner – Umbilical Cable – 10 m long – Compatible with both AUT-PipeScanners – Connection for 2 motors, 2 encoders, video, couplant, but NOT for phased array probes

1374-70-0015 ZGN-SCN-APS-UMBILICAL40M Automated UT Pipe Scanner – Umbilical Cable – 40 m long – Compatible with both AUT-PipeScanners – Connection for 2 motors, 2 encoders, video, couplant, but NOT for phased array probes

Ordering Information > Automated Pipe Scanner (APS)


Phased Array Tube (PAT) Scanners

For pipe diameters from 2” to 4”>

Lightweight device (<9 lbs, including probes)>

Single encoder, for one-line circumferential sequences>

Servomotors for circumferential scanning, and axial > probe position adjustments (<20 mm)

The PAT (Phased Array Tube) Scanner is a miniature motorized scanner for rapid, fully automated phased array examination of small diameter horizontal or vertical pipes in a tight environment. It can carry either two probes (e.g., for weld inspection), or one large probe (e.g., for corrosion mapping). It is compatible with all Zetec Phased Array equipments.

10021689 ZGN-SCN-PAT-1AXIS-2IN PA Tube Scanner – Single Axis Scanning Mechanism for 1.75" & 2.0" tubes, controlled by MPSU-01 – motorized axial probe arm adjustment – fi ts in tight radial clearance – quick clamping – includes remote control and cabling

Ordering Information > Phased Array Tube (PAT) Scanners

30 > UT > Scanners and Motor Controllers > Phased Array Tube (PAT) Scanners


UT > Scanners and Motor Controllers > Motor Controllers > 31

Motor Controllers

Drive various types of commercial servo motors in > open-loop (slave) mode (MPSU or MCDU) and feedback (master) mode (MCDU)

Small, lightweight, and versatile>

Encoder information output compatible with all Zetec > UT and PA equipment

Zetec also supplies motor control units to drive mechanical scanners and provide accurate encoding of probe data position. One- and two-axis scanner control units are available.

10024505 ZGN-CTR-MPSU01 Motor Power Supply Unit for 1-Axis Scanners

10029447 ZGN-CTR-MCDU02 Motor Control Drive Unit for 1 or 2-Axis Scanner with Servo Motors – Versatile 2-axis servomotor drive unit with built-in controller – Capable of single-axis and dual-axis scans (comb, raster, or helicoidal)

Ordering Information > Motor Controllers

UT > PA PROBES AND WEDGES

Phased Array Probes and Wedges

Generic 1-D linear and 2-D matrix array probes>

Standard OmniScan PA compatible phased > array probes

Integrated low-frequency dual 2-D array probes > for inspection of attenuating materials

Zetec does not manufacture phased array probes, but through solid partnerships with leading phased array probe suppliers in Europe and North America, we can provide a wide range of phased array probes for various applications.

Zetec also provides engineering services for design, fabrication and validation of custom phased array probes and wedges for special applications.

780-1001-000 ZPA-PB1D-2.25L32E32-15-REX-5M-HYP 2.25L32E32-15, 1-D Linear Array Probe – 2.25 MHz – 32 elements – active surface of 1.26 in × 0.47 in (32 mm × 15 mm) – Hypertronics connector – 16.4 ft (5 m) cable – Compatible with OmniScan PA system with the use of Omni-A-ADP03 adapter

780-1005-000 ZPA-PB1D-2.25L32E45-22-REX-5M-HYP 2.25L32E45-22, 1-D Linear Array Probe – 2.25 MHz – 32 elements – active surface of 1.77 in × 0.87 in (45 mm × 22 mm) – Hypertronics connector – 16.4 ft (5 m) cable – Compatible with OmniScan PA system with the use of Omni-A-ADP03 adapter

780-1010-000 ZPA-PB1D-5L32E32-10-REX-5M-HYP 5L32E32-10, 1-D Linear Array Probe – 5 MHz – 32 elements – active surface of 1.26 in × 0.39 in (32 mm × 10 mm) – Hypertronics connector – 16.4 ft (5 m) cable – Compatible with OmniScan PA system with the use of Omni-A-ADP03 adapter

780-1015-000 ZPA-PB1D-5L32E32-15-REX-5M-HYP 5L32E32-15, 1-D Linear Array Probe- 5 MHz – 32 elements – active surface of 1.26 in × 0.59 in (32 mm × 15 mm) – Hypertronics connector – 16.4 ft (5 m) cable – Compatible with OmniScan PA system with the use of Omni-A-ADP03 adapter



Ordering Information > Generic Phased Array Probes

32 > UT > PA Probes and Wedges > Generic Phased Array Probes


UT > PA Probes and Wedges > Generic Phased Array Probes > 33

10024508 ZPA-PB1D-7.5L32E16-5-R-STL-7M-HYP 7.5L32E16-5-IW31-R, 1-D Linear Array Probe – 7.5 MHz – 32 elements -active surface of 0.63 in × 0.20 in (16 mm × 5 mm) – integrated wedge – Hypertronics connector – 23 ft (7 m) cable – compatible with PAT scanner

10024509 ZPA-PB1D-7.5L32E16-5-L-STL-7M-HYP 7.5L32E16-5-IW31-L, 1-D Linear Array Probe – 7.5 MHz – 32 elements -active surface of 0.63 in × 0.20 in (16 mm × 5 mm) – integrated wedge – Hypertronics connector – 23 ft (7 m) cable – compatible with PAT scanner



10024521 ZPA-PB2D-0.5M4x8A6A-REX-5M-HYP_2 0.5M4x8A6A, 2-D Matrix Array Probe – 0.5 MHz – 32 elements – active surface of 1.81 in × 0.83 in or 46 mm × 21 mm – Hypertronics connector – 5 m cable (price for 2 probes)


10024523 ZPA-PB2D-0.8M10x5E44-22-REX-5M-HYP 0.8M10x5E44-22 – 2-D Matrix Array Probe – 0.80 MHz – 50 elements – active surface of 1.73 in × 0.87 in or 44 mm × 22 mm – Hypertronics connector – 5 m cable

10024524 ZPA-PB2D-1M4x8A6A-REX-5M-HYP_2 1M4x8A6A, 2-D Matrix Array Probe – 1 MHz – 32 elements – active surface of 1.81 in × 0.83 in or 46 mm × 21 mm – Hypertronics connector – 5 m cable (price for 2 probes)

10024529 ZPA-PB2D1.5M5x3E17.5-9-REX-5M-HYP_1 1.5M5x3E17.5-9, 2-D Matrix Array Probe – 1.5 MHz – 15 elements – active surface of 0.69 in × 0.35 in or 18 mm × 9 mm – Hypertronics connector – 5 m cable

10024528 ZPA-PB2D1.5M8x4E28-16-REX-5M-HYP_1 1.5M8x4E28-16, 2-D Matrix Array Probe – 1.5 MHz – 32 elements – active surface of 1.10 in × 0.63 in or 28 mm × 16 mm – Hypertronics connector – 5 m cable




Ordering Information > Generic Phased Array Probes


34 > UT > PA Probes and Wedges > OmniScan Compatible Phased Array Probes

10030093 ZPA-PB1D-1.5L16-A4-REX-2.5M-OMNI Phased array angle beam, A4 casing, Deep penetration application, 1.5 MHz, 16 elements, XX m cable with YY connector type.

10030094 ZPA-PB1D-1.5L16-A4-REX-2.5MP-OMNI XAAB-0030: Phased-Array Angle Beam, 1.5 MHz, 16 elements, 2.8 mm pitch, 26 mm elevation, A4 housing, 2.5 meter PVC cable, OmniScan connector

10024517 ZPA-PB1D-10L10A0SIDE-REX-2.5M-OMNI 10L10_A0-SIDE, 1-D Linear Array Probe – 10 MHz – 10 elements – A0 probe casing with cable exit on side – active surface of 0.24 in × 0.24 in (6 mm × 6 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10024518 ZPA-PB1D-10L10A0TOP-REX-2.5M-OMNI 10L10_A0-TOP, 1-D Linear Array Probe – 10 MHz – 10 elements – A0 probe casing with cable exit on top – active surface of 0.24 in × 0.24 in (6 mm × 6 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10024520 ZPA-PB1D-10L128-I2-H2O-2.5M-OMNI 10L128-I2, 1-D Linear Array Probe – 10 MHz – 128 elements – I2 probe casing – active surface of 1.26 in × 0.28 in (64 mm × 7 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable – acoustic matching for water

10030095 ZPA-PB1D-10L16-A00BK-REX-2.5MP-OMNI XAAB-0174: Phased-Array Angle Beam, 10.0 MHz, 16 Element, 0.3 mm Pitch, 5 mm Elevation, A00 Angle Beam Housing, PVC Cable, 2.5 m Length, OmniScan Connector, Back Exit

10024516 ZPA-PB1D-10L16-A00-REX-2.5M-OMNI 10L16-A00, 1-D Linear Array Probe – 10 MHz – 16 elements – A00 probe casing – active surface of 0.20 in × 0.20 in (5 mm × 5 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030096 ZPA-PB1D-10L16-A00-REX-2.5MP-OMNI XAAB-0077: Phased-Array Angle Beam, 10 MHz, 16 Elements, 0.31 mm Pitch, 5 mm Elevation, A00 Angle Beam Housing, PVC Cable, 2.5 m Length, OmniScan Connector

10030097 ZPA-PB1D-10L16-B-REX-2.5M-OMNI Special 10 MHz 16 element Phased Array Transducer with OmniScan connector.

10030098 ZPA-PB1D-10L16-REX-2.5M-OMNI Phased array angle beam, 10 MHz, 16 elements, 8 × 8 mm footprint, 5 × 5 mm active surface, 2.5 m cable length, OmniScan connector type

10030080 ZPA-PB1D-10L32-A10-REX-2.5M-OMNI Phased-array angle beam, A10 housing, 10 MHz, 32 elements, 2.5 m cable length, OmniScan connector type

780-2030-000 ZPA-PB1D-10L32-A1-REX-2.5M-OMNI 10L32-A1, 1-D Linear Array Probe – 10 MHz – 32 elements – A1 probe casing – active surface of 0.39 in × 0.28 in (10 mm × 7 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030099 ZPA-PB1D-10L32-PWZ3-REX-2.5M-OMNI Phased-Array probe, 10 MHz, linear, 32 elements, 1 mm pitch, 10 mm elevation, suitable with PWZ3 wedge type, 2.5 m cable length, OmniScan connector type

10030100 ZPA-PB1D-10L64-A2-REX-2.5M-OMNI Phased array angle beam, 10 MHz, 64 elements, A2 type casing, 38.4 × 7 mm active surface, 2.5 m cable length, OmniScan connector type

10030101 ZPA-PB1D-10L64-AL-REX-2.5M-OMNI 10 MHz linear probe with 64 elements for lateral inspection. Active area is 19.8 × 5 mm. Pitch is 0.31 mm. Matching layer for Rexolite. PVC jacket. 2.5 m long cable with OmniScan connector. 3rd layer crack

10030102 ZPA-PB1D-10L64-FSW-H2O-2.5M-OMNI Phased-Array probe, 10 MHz, linear, 64 elements, 0.5 mm pitch, 5 mm elevation, Immersion, suitable with FSW wedge type, 2.5 m cable length, OmniScan connector type

10024519 ZPA-PB1D-10L64-I1-H2O-2.5M-OMNI 10L64-I1, 1-D Linear Array Probe – 10 MHz – 64 elements – I1 probe casing – active surface of 1.26 in × 0.39 in (32 mm × 10 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable – acoustic matching for water

Ordering Information > OmniScan Compatible Phased Array Probes


UT > PA Probes and Wedges > OmniScan Compatible Phased Array Probes > 35

10030103 ZPA-PB1D-1L64-H2O-2.5MP-OMNI 1L64-96x22-I – 1 MHz, 64 elements phased array immersion probe. Elevation of 22 mm. Active aperture of 96 mm. Pitch of 1.5 mm. 2.5 m PVC cable with OmniScan connector.

10024511 ZPA-PB1D-2.25L128-I3-H2O-2.5M-OMNI 2L128-I3, 1-D Linear Array Probe – 2.25 MHz – 128 elements – I3 probe casing – active surface of 3.78 in × 0.47 in (96 mm × 12 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable – acoustic matching for water

10030105 ZPA-PB1D-2.25L16-45LW1-STL-2.5M-OMNI Phased-array probe, 2.25 MHz with 16 elements, 45-degree L-wave internal wedge, 2.5 m cable length, OmniScan connector type

10030106 ZPA-PB1D-2.25L16-45SW1-STL-2.5M-OMNI Phased-array probe, 2.25 MHz with 16 elements, 45-degree shear wave internal wedge, 2.5 m cable length, OmniScan connector type

10027442 ZPA-PB1D-2.25L16-A1-REX-2.5M-OMNI 2L16-A1, 1-D Linear Array Probe – 2.25 MHz – 16 elements – A1 probe casing – active surface of 0.47 in × 0.47 in (12 mm × 12 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030107 ZPA-PB1D-2.25L16-A1-REX-2.5MP-OMNI XAAB-0006: Phased-Array Angle Beam Probe, 2.25 MHz, 16 Elements, 0.75 mm Pitch, 12 mm Elevation, A1 Angle Beam Housing, PVC Cable, 2.5 m Length, OmniScan Connector

780-2002-000 ZPA-PB1D-2.25L16-A4-REX-2.5M-OMNI 2L16-A4, 1-D Linear Array Probe – 2.25 MHz – 16 elements – A4 probe casing – active surface of 1.26 in × 1.26 in (32 mm × 32 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030108 ZPA-PB1D-2.25L16-AWS-REX-2.5M-OMNI Phased-Array probe, 2 MHz, linear, 16 elements, 1.25 mm pitch, 20 mm elevation, suitable with AWS wedge type, 2.5 m cable length, OmniScan connector type

780-2003-000 ZPA-PB1D-2.25L32-A5-REX-2.5M-OMNI 2L32-A5, 1-D Linear Array Probe – 2.25 MHz – 32 elements – A5 probe casing – active surface of 0.95 in × 0.95 in (24 mm × 24 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

780-2005-000 ZPA-PB1D-2.25L64-A2-REX-2.5M-OMNI 2L64-A2, 1-D Linear Array Probe – 2.25 MHz – 64 elements – A2 probe casing – active surface of 1.89 in × 0.47 in (48 mm × 12 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable

10030111 ZPA-PB1D-2L8-DGS-REX-2.5M-OMNI Phased-array probe, DGS1 housing, 2 MHz, 8 elements, â€“40 to 70 degree shear wave internal wedge, 2.5 m cable length, OmniScan connector type

780-2006-000 ZPA-PB1D-3.5L16-A3-REX-2.5M-OMNI2 3L16-A3, 1-D Linear Array Probe – 3.5 MHz – 16 elements – A3 probe casing – active surface of 1.01 in × 1.01 in (26 mm × 26 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030112 ZPA-PB1D-3.5L64-NW1-REX-2.5M-OMNI Phased-Array probe, 3.5 MHz, linear, 64 elements, 1 mm pitch, 7 mm elevation, suitable with NW1 wedge type, 2.5 m cable length, OmniScan connector type

10024512 ZPA-PB1D-5L10A0SIDE-REX-2.5M-OMNI 5L10_A0-SIDE, 1-D Linear Array Probe – 5 MHz – 10 elements – A0 probe casing with cable exit on side – active surface of 0.24 in × 0.24 in (6 mm × 6 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10024513 ZPA-PB1D-5L10A0TOP-REX-2.5M-OMNI 5L10_A0-TOP, 1-D Linear Array Probe – 5 MHz – 10 elements – A0 probe casing with cable exit on top – active surface of 0.24 in × 0.24 in (6 mm × 6 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030114 ZPA-PB1D-5L10A0TOP-REX-2.5MP-OMNI XAAB-0007: Phased-Array Angle Beam Probe, 5.0 MHz, 10 Elements, 0.6 mm Pitch, 6 mm Elevation, A0 Angle Beam Housing, PVC Cable, 2.5 m Length, OmniScan Connector, Cable Top Exit



36 > UT > PA Probes and Wedges > OmniScan Compatible Phased Array Probes

10024514 ZPA-PB1D-5L128-I2-H20-2.5M-OMNI 5L128-I2, 1-D Linear Array Probe – 5 MHz – 128 elements – I2 probe casing – active surface of 3.07 in × 0.39 in (77 mm × 10 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable – acoustic matching for water

10024515 ZPA-PB1D-5L128-I3-H20-2.5M-OMNI 5L128-I3, 1-D Linear Array Probe – 5 MHz – 128 elements – I3 probe casing – active surface of 3.78 in × 0.39 in (96 mm × 10 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable – acoustic matching for water

10030115 ZPA-PB1D-5L16-45LW1-STL-2.5M-OMNI Phased-array probe, 5 MHz with 16 elements, 45-degree L-wave internal wedge, 2.5 m cable length, OmniScan connector type

10027286 ZPA-PB1D-5L16-45SW1-STL-2.5M-OMNI 5L16-45SW1, 1-D Linear Array Probe with integrated wedge – 5 MHz – 16 elements – W1 probe casing – active surface of 0.39 in × 0.39 in (10 mm × 10 mm) – OmniScan PA compatible connector – 8.2 ft (2.5 m) cable

10030084 ZPA-PB1D-5L16-A10-REX-2.5M-OMNI Phased-array angle beam, A10 housing, 5 MHz, 16 elements, XX m cable with YY connector type

10030117 ZPA-PB1D-5L16-A10-REX-2.5MP-OMNI XAAB-0184: Phased-Array Angle Beam Probe, 5 MHz, 16 Elements, 0.6 mm pitch, 10 mm elevation, A10 housing, PVC Cable, 2.5 m Length, OmniScan Connector


10030118 ZPA-PB1D-5L16-A1TOP-REX-2.5MP-OMNI XAAB-0091: Phased-Array Angle Beam Probe, 5 MHz, 16 Elements, 0.6 mm pitch, 10 mm elevation, A1 housing, PVC Cable, 2.5 m Length, OmniScan Connector, Top Exit


10030119 ZPA-PB1D-5L24-NW2-REX-2.5M-OMNI Phased-Array probe, 5 MHz, linear, 24 elements, 1 mm pitch, 7 mm elevation, suitable with NW2 wedge type, 2.5 m cable length, OmniScan connector type



10030120 ZPA-PB1D-5L32-B-A11-REX-2.5M-OMNI XAAB-0207: Phased-Array Angle Beam Probe, 5 MHz, 32 Elements, 0.6 mm pitch, 10 mm elevation, A11 housing, PVC Cable, 2.5 m Length, OmniScan Connector

10030121 ZPA-PB1D-5L32-C-NW-REX-2.5M-OMNI XAAB-0328 Phased -Array Angle Beam Probe, 32 elements, 1 mm pitch, 7 mm elevation, Custom NW housing, PVC cable, 2.5 meter length, OmniScan connector






UT > PA Probes and Wedges > OmniScan Compatible Phased Array Probes > 37


780-2015-000 ZPA-PB1D-5L64-A2-REX-2.5M-OMNI 5L64-A2, 1-D Linear Array Probe – 5 MHz – 64 elements – A2 probe casing – active surface of 1.49 in × 0.39 in (38 mm × 10 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable

10030125 ZPA-PB1D-5L64-B-A12-REX-2.5M-OMNI XAAB-0213: Phased-Array Angle Beam Probe, 5 MHz, 64 Elements, 0.6 mm pitch, 10 mm elevation, A12 housing, PVC Cable, 2.5 m Length, OmniScan Connector

10030126 ZPA-PB1D-5L64-B-A2-P-REX-0.6M-OMNI XAAB-0177: Phased- Array Angle Beam, 5 MHz, 64 elements, 0.6 mm pitch, 10 mm elevation, A2 housing, 0.6 meter PVC cable

10030127 ZPA-PB1D-5L64-B-A2-P-REX-30.5M-OMNI XAAB-0117: Phased-Array Angle Beam Probe, 5.0 MHz, 64 Elements, 0.6 mm Pitch, 10 mm Elevation, A2 Angle Beam Housing, PVC Cable, 30.5 m Length, OmniScan Connector

780-2020-000 ZPA-PB1D-5L64-I1-H20-2.5M-OMNI 5L64-I1, 1-D Linear Array Probe – 5 MHz – 64 elements – I1 probe casing – active surface of 1.49 in × 0.39 in (38 mm × 10 mm ) – OmniScan PA compatible – 8.2 ft (2.5 m) cable – acoustic matching for water

10030129 ZPA-PB1D-7.5L32-PWZ3-REX-2.5M-OMNI Phased-Array probe, 7.5 MHz, linear, 32 elements, 1 mm pitch, 10 mm elevation, suitable with PWZ3 wedge type, 2.5 m cable length, OmniScan connector type



Custom order # ZPA-PB1D-OPT-C128 OmniScan connector type option with one UT channel Lemo 00 connector on pin number #128 (-OL)

Custom order # ZPA-PB1D-OPT-CBL-10M Cable length option for OmniScan type probe with 10 to 128 elements – 33 ft (10 m) instead of 8.2 ft (2.5 m)

Custom order # ZPA-PB1D-OPT-CBL-5M Cable length option for OmniScan type probe with 10 to 128 elements – 16 ft (5 m) instead of 8.2 ft (2.5 m)

10024540 ZPA-PB1D-OPT-HYP Hypertronics connector option for OmniScan type probe



38 > UT > PA Probes and Wedges > Integrated Dual 2-D Phased Array Probes

780-3060-000 ZPA-PB2D-TS45056M2A-STL-5M-HYP TS45 0.5 6M2A, Dual 2-D Matrix Array Probe, 1 MHz, 2 × (2 × 16) elements – Inspection of cast SS welds from 40 to 90 mm thickness – L × W = 2.13 × 2.13 in. or 54 × 54 mm – Hypertronics connector

780-3055-000 ZPA-PB2D-TS450756M3A-STL-5M-HYP TS45 0.75 6M3A, Dual 2-D Matrix Array Probe, 0.75 MHz, 2 × (3 × 11) elements – Inspection of cast SS welds from 40 to 90 mm thickness – L × W = 2.13 × 2.13 in. or 54 × 54 mm – Hypertronics connector

780-3045-000 ZPA-PB2D-TS4516M2A-STL-5M-HYP TS45 1 6M2A, Dual 2-D Matrix Array Probe, 1 MHz, 2 × (2 × 11) elements – Inspection of cast SS and dissimilar metal welds from 40 to 70 mm thickness – L × W = 2.13 × 2.13 in. or 54 × 54 mm – Hypertronics connector

780-3050-000 ZPA-PB2D-TS4516M3A-STL-5M-HYP TS45 1 6M3A, Dual 2-D Matrix Array Probe, 1 MHz, 2 × (3 × 11) elements – Inspection of cast SS and dissimilar metal welds from 40 to 70 mm thickness – L × W = 2.13 × 2.13 in. or 54 × 54 mm – Hypertronics connector

780-3030-000 ZPA-PB2D-TS50156M2A-STL-5M-HYP TS50 1.5 6M2A, Dual 2-D Matrix Array Probe, 1.5 MHz, 2 × (2 × 16) elements – Inspection of wrought SS and dissimilar metal welds up to 70 mm thickness – L × W = 2.13 × 2.13 in. or 54 × 54 mm – Hypertronics connector



780-3010-000 ZPA-PB2D-TS4522M2A-STL-5M-HYP TS45 2 2M2A, Dual 2-D Matrix Array Probe, 2.25 MHz, 2 × (2 × 14) elements – Inspection of wrought SS and dissimilar metal welds up to 35 mm thickness – L × W = 1.00 × 1.00 in. or 25 mm × 25 mm – Hypertronics connector

780-3015-000 ZPA-PB2D-TS4522M3A-STL-5M-HYP TS45 2 2M3A, Dual 2-D Matrix Array Probe, 2.25 MHz, 2 × (3 × 11) elements – Inspection of wrought SS and dissimilar metal welds up to 35 mm thickness – L × W = 1.00 × 1.00 in. or 25 × 25 mm – Hypertronics connector

780-3020-000 ZPA-PB2D-TS5023M2A-STL-5M-HYP TS50 2 3M2A, Dual 2-D Matrix Array Probe, 2 MHz, 2 × (2 × 16) elements – Inspection of wrought SS and dissimilar metal welds up to 50 mm thickness – L × W = 1.34 × 1.34 in. or 34 × 34 mm – Hypertronics connector

780-3025-000 ZPA-PB2D-TS5023M3A-STL-5M-HYP TS50 2 3M3A, Dual 2-D Matrix Array Probe, 2 MHz, 2 × (3 × 11) elements – Inspection of wrought SS and dissimilar metal welds up to 50 mm thickness – L × W = 1.34 × 1.34 in. or 34 × 34 mm – Hypertronics connector

780-3001-000 ZPA-PB2D-TS502251M2A-STL-5M-HYP TS50 2.25 1M2A, Dual 2-D Matrix Array Probe, 2.25 MHz, 2 × (2 × 14) elements – Inspection of wrought SS welds up to 20 mm thickness – L × W = 0.55 × 0.95 in. or 14 × 24 mm – Hypertronics connector

780-3005-000 ZPA-PB2D-TS502251M4A-STL-5M-HYP TS50 2.25 1M4A, Dual 2-D Matrix Array Probe, 2.25 MHz, 2 × (4 × 8) elements – Inspection of wrought SS welds up to 20 mm thickness – L × W = 0.55 × 0.95 in. or 14 × 24 mm – Hypertronics connector

Ordering Information > Integrated Dual 2-D Phased Array Probes


UT > PA Probes and Wedges > Phased Array Wedges > 39

10024583 ZPA-ACC-W-SA00-0L-FL Standard wedge for A00 type phased array probe – normal scan – nominal 0-degree longitudinal wave – plain wedge (no irrigation, holes or carbides).


10024584 ZPA-ACC-W-SA00-N45S-FL Standard wedge for A00 type phased array probe – normal scan – nominal 45-degree shear wave – plain wedge (no irrigation, holes or carbides).


10030132 ZPA-ACC-W-SA00-N60S-IHC-FL WDGE-0176: Standard Wedge for Angle Beam Phased-Array Probe A00, Normal Scan, 60-Degree Shear Wave with Irrigation Holes and Carbides

10024587 ZPA-ACC-W-SA0-N45L-FL Standard wedge for A0 type phased array probe – normal scan – nominal 45-degree longitudinal wave – plain wedge (no irrigation, holes or carbides).



New item ZPA-ACC-W-SA10-0L-FL Standard wedge for angle beam phased array probe A10, normal scan, 0-degree longitudinal wave, plain wedge (without irrigation, holes, carbides).


10024547 ZPA-ACC-W-SA1-0L-IHC-AOD10 Standard wedge for A1 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 10 in. (254 mm) for circumferential fl aw detection


10024549 ZPA-ACC-W-SA1-0L-IHC-AOD16 Standard wedge for A1 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 12 in. (305 mm ) for circumferential fl aw detection


10024551 ZPA-ACC-W-SA1-0L-IHC-AOD2.25 Standard wedge for A1 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 2.25 in. (57 mm) for circumferential fl aw detection



Ordering Information > Phased Array Wedges


40 > UT > PA Probes and Wedges > Phased Array Wedges












10024590 ZPA-ACC-W-SA1-0L-IHC-FL Standard wedge for A1 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides)

New item ZPA-ACC-W-SA10-N55S-AOD10.75 Standard wedge for angle beam phased array probe A10, normal scan, 55-degree shear wave, plain wedge (without irrigation holes and carbides).footprint curvature OD 10.75 in. for circumferential fl aw detection

New item ZPA-ACC-W-SA10-N55S-AOD12.75 Standard wedge for angle beam phased array probe A10, normal scan, 55-degree shear wave, plain wedge (without irrigation holes and carbides), footprint curvature OD 12.75 in. for circumferential fl aw detection









New item ZPA-ACC-W-SA10-N55S-FL Standard wedge for angle beam phased array probe A10, normal scan, 55-degree shear wave, plain wedge (without irrigation holes and carbides).

New item ZPA-ACC-W-SA10-N60L-FL Standard wedge for angle beam phased array probe A10, normal scan, 60-degree longitudinal wave, plain wedge (without irrigation holes and carbides).


New item ZPA-ACC-W-SA11-N55S-FL Standard wedge for angle beam phased array probe A11, normal scan, 55-degree shear wave, plain wedge (without irrigation holes and carbides)



New item ZPA-ACC-W-SA12-N55S-FL Standard wedge for angle beam phased array probe A12, normal scan, 55-degree shear wave, plain wedge (without irrigation holes and carbides).


10024591 ZPA-ACC-W-SA1-L45L-FL Standard wedge for A1 type phased array probe – lateral scan – nominal 45-degree longitudinal wave – plain wedge (no irrigation, holes or carbides).

10024592 ZPA-ACC-W-SA1-L45L-IHC-FL Standard wedge for A1 type phased array probe – lateral scan – nominal 45-degree longitudinal wave – IHC option (irrigation, holes and carbides)

10024593 ZPA-ACC-W-SA1-L45S-FL Standard wedge for A1 type phased array probe – lateral scan – nominal 45-degree longitudinal wave – plain wedge (no irrigation, holes or carbides).

10024594 ZPA-ACC-W-SA1-L45S-IHC-FL Standard wedge for A1 type phased array probe – lateral scan – nominal 45-degree shear wave – IHC option (irrigation, holes and carbides)




10024595 ZPA-ACC-W-SA1-N45L-FL Standard wedge for A1 type phased array probe – normal scan – nominal 45-degree longitudinal wave – plain wedge (no irrigation, holes or carbides)

10024596 ZPA-ACC-W-SA1-N45L-IHC-FL Standard wedge for A1 type phased array probe – normal scan – nominal 45-degree longitudinal wave – IHC option (irrigation, holes and carbides)



10024621 ZPA-ACC-W-SA1-N60S-FL Standard wedge for A1 type phased array probe – normal scan – nominal 60-degree shear wave – plain wedge (no irrigation, holes or carbides)

10024616 ZPA-ACC-W-SA1-N60S-IHC-AOD10 Standard wedge for A1 type phased array probe – normal scan – nominal 60-degree shear wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 10 in. (254 mm) for circumferential fl aw detection

10024617 ZPA-ACC-W-SA1-N60S-IHC-AOD12 Standard wedge for A1 type phased array probe – normal scan – nominal 60-degree shear wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 12 in. (305 mm ) for circumferential fl aw detection



10024604 ZPA-ACC-W-SA1-N60S-IHC-AOD2.25 Standard wedge for A1 type phased array probe – normal scan – nominal 60-degree shear wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 2.25 in. (57 mm) for circumferential fl aw detection

















10024601 ZPA-ACC-W-SA1-N60S-IHC-FL Standard wedge for A1 type phased array probe – normal scan – nominal 60-degree shear wave – IHC option (irrigation, holes and carbides)

10030163 ZPA-ACC-W-SA1-N60S-IHC-FL-SA SA1-N60S-IHC-SA -Wedge for angle beam phased array probe A1, lateral scan, 60-degree shear wave short approach, plain wedge (without irrigation, holes, carbides).

10030164 ZPA-ACC-W-SA1-N60S-IHC-SA-AOD10.750 Wedge for angle beam Phased Array Probe A1, normal scan, 60-degree shear wave with irrigation, holes. The wedge features a curvature matching 10.75 in. outside diameter (OD) pipe for inspection of circumferential welds.

10030166 ZPA-ACC-W-SA1-N60S-IHC-SA-AOD2 Wedge for angle beam Phased Array Probe A1, normal scan, 60-degree shear wave with irrigation, holes, carbides and Short Approach option. The wedge features a curvature matching 2 in. outside diameter (OD) pipe for inspection of circumferential welds.

10030167 ZPA-ACC-W-SA1-N60S-IHC-SA-AOD8.625 Wedge for angle beam Phased Array Probe A1, normal scan, 60-degree shear wave with irrigation, holes. The wedge features a curvature matching 8.625 in. outside diameter (OD) pipe for inspection of circumferential welds.







10024567 ZPA-ACC-W-SA2-0L-IHC-AOD16 Standard wedge for A2 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 12 in. (305 mm ) for circumferential fl aw detection
























10024644 ZPA-ACC-W-SA2-N55S-IHC-AOD12 Standard wedge for A2 type phased array probe – normal scan – nominal 55-degree shear wave – IHC option (irrigation, holes and carbides) – footprint curvature OD 12 in. (305 mm ) for circumferential fl aw detection



























































10030186 ZPA-ACC-W-SA-MINI Mini-wedge for Helix scanner

10030187 ZPA-ACC-W-SA-MINI-AOD0.84 Mini-wedge for Helix scanner featuring a curvature matching 0.84 in. outside diameter (OD) pipe for inspection of circumferential welds.










10030199 ZPA-ACC-W-SAWS-N60S Standard wedge for angle beam phased array probe AWS, normal scan, 60-degree shear wave, plain wedge (without irrigation holes and carbides)




10024684 ZPA-ACC-W-SI1-0L-FL Standard wedge for I1 type phased array probe – normal scan – nominal 0-degree longitudinal wave – plain wedge (no irrigation, holes or carbides).

10024685 ZPA-ACC-W-SI1-0L-IHC-FL Standard wedge for I1 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides)

10024686 ZPA-ACC-W-SI1-N45S-FL Standard wedge for I1 type phased array probe – normal scan – nominal 45-degree shear wave – plain wedge (no irrigation, holes or carbides)

10024687 ZPA-ACC-W-SI1-N45S-IHC-FL Standard wedge for I1 type phased array probe – normal scan – nominal 45-degree shear wave – IHC option (irrigation, holes and carbides)


10024689 ZPA-ACC-W-SI2-0L-IHC-FL Standard wedge for I2 type phased array probe – normal scan – nominal 0-degree longitudinal wave – IHC option (irrigation, holes and carbides)

10024690 ZPA-ACC-W-SI2-N45S-FL Standard wedge for I2 type phased array probe – normal scan – nominal 45-degree shear wave – plain wedge (no irrigation, holes or carbides)

10024691 ZPA-ACC-W-SI2-N45S-IHC-FL Standard wedge for I2 type phased array probe – normal scan – nominal 45-degree shear wave – IHC option (irrigation, holes and carbides)


10030200 ZPA-ACC-W-SNW1-0L-IHC Standard wedge for phased array probe Near Wall (NW) casing type, normal scan, 0-degree longitudinal wave with IHC option (irrigation, holes and carbides)

10030202 ZPA-ACC-W-SNW1-0L-IHC-C Standard wedge for phased array probe NWI and NWA casing type, normal scan, 0-degree longitudinal wave with IHC option (irrigation, holes and carbides). With Nylon wear pins for composite inspection.

10030203 ZPA-ACC-W-SNW1-0L-WATERBOX Water box for phased array probe near wall NW1 casing type, normal scan, 0-degree longitudinal wave, plain wedge (without irrigation, holes, carbides) include 5 degree aqualene membrane.

10030204 ZPA-ACC-W-SNW1-0L-WP5 Wedge 0 deg Longitudinal Wave for NW1 probe 20 mm thick with irrigation and water chamber of 0.005

10030205 ZPA-ACC-W-SNW2-0L Standard wedge for phased array probe NW2 casing type, normal scan, 0-degree longitudinal wave, plain wedge (without irrigation, holes, carbides).

10030206 ZPA-ACC-W-SNW2-0L-IHC Standard wedge for phased array probe NW2 casing type, normal scan, 0-degree longitudinal wave, plain wedge with irrigation, holes, carbides).

10030207 ZPA-ACC-W-SNW2-0L-WP5 Wedge 0 deg Longitudinal Wave for NW2 probe 20 mm thick with irrigation and water chamber of 0.005.

10030208 ZPA-ACC-W-SNW3-0L-IHC-C Standard wedge for phased array probe NW3 casing type, normal scan, 0-degree longitudinal wave with IHC option (irrigation, holes and carbides). With Nylon wear pins for composite inspection

10030209 ZPA-ACC-W-SPWZ1-0L Standard wedge for angle beam phased array probe PWZ1, normal scan, 0-degree longitudinal wave, plain wedge (without irrigation holes and carbides).




10030210 ZPA-ACC-W-SPWZ1-0L-IHC Standard wedge for angle beam phased array probe SPWZ1, normal scan, 0-degree longitudinal wave with IHC option (irrigation, holes and carbides).

10030211 ZPA-ACC-W-SPWZ1-N55S 55 Degree wedge for Pipe Wizard Phased Array Probes

10030212 ZPA-ACC-W-SPWZ1-N55S-IHC Standard wedge for angle beam phased array probe SPWZ1, normal scan, 55-degree shear wave with IHC option (irrigation, holes and carbides).

10030213 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD10 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 7.6 in. (192 mm) to 10 in. (254 mm) outside diameter (OD)

10030214 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD12 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation, holes and carbides). The wedge features a curvature matching 8.7 in. (220 mm) to 12 in. (304.8 mm) outside diameter (OD)


10030216 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD2 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 1.8 in. (46 mm) to 2 in. (50.8 mm) outside diameter (OD)

10030217 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD2.25 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD)

10030218 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD2.5 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD)

10030219 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD2.75 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.5 in. (63 mm) to 2.75 in. (69.85 mm) outside diameter (OD)



10030222 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD3.25 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.9 in. (74 mm) to 3.25 in. (84 mm) outside diameter (OD)






10030225 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD4 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 3.5 in. (88.5 mm) to 4 in. (101.6 mm) outside diameter (OD)



10030228 ZPA-ACC-W-SPWZ1-N55S-IHC-AOD6 Standard wedge for angle beam phased array probe SPWZ1 type, normal scan, 55-degree shear wave with IHC option (irrigation holes and carbides). The wedge features a curvature matching 5 in. (127 mm) to 6 in. (152.4 mm) outside diameter (OD)



10030231 ZPA-ACC-W-SPWZ1-N60L-IHC Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).

10030232 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD10 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 7.6 in. (192 mm) to 10 in. (254 mm) outside diameter (OD)

10030233 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD12 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 8.7 in. (220 mm) to 12 in. (304.8 mm) outside diameter (OD)



10030236 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD2.25 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD)

10030237 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD2.5 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 2.3 in. (57.15 mm) to 2.5 in. (63.5 mm) outside diameter (OD)

10030238 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD2.75 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 2.5 in. (63 mm) to 2.75 in. (69.85 mm) outside diameter (OD)






10030241 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD3.25 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 2.9 in. (74 mm) to 3.25 in. (84 mm) outside diameter (OD)


10030243 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD30 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 19.7 in. (500 mm) to 30 in. (762 mm) outside diameter (OD) pipe fo

10030244 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD4 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 3.5 in. (88.5 mm) to 4 in. (101.6 mm) outside diameter (OD)



10030247 ZPA-ACC-W-SPWZ1-N60L-IHC-AOD6 Standard wedge for angle beam phased array probe SPWZ1, normal scan, 60-degree longitudinal wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 5 in. (127 mm) to 6 in. (152.4 mm) outside diameter (OD)





10030252 ZPA-ACC-W-SPWZ2-N55S Standard wedge for angle beam phased array probe SPWZ2, normal scan, 55-degree shear wave plain wedge ( without irrigation holes carbides)







10030257 ZPA-ACC-W-SPWZ3-N45S Standard wedge for angle beam phased array probe SPWZ3, normal scan, 45-degree shear wave plain wedge (without irrigation holes and carbides).



10030260 ZPA-ACC-W-SPWZ3-N55S-IHC-AOD2 Standard wedge for angle beam phased array probe SPWZ3, normal scan, 55-degree shear wave with IHC option (irrigation, holes and carbides).The wedge features a curvature matching 1.8 in. (46 mm) to 2 in. (50.8 mm) outside diameter (OD)


UT > PDI-QUALIFIED PROCEDURES & EQUIPMENT

Detection and characterization of IGSCC (Inter Granular Stress Corrosion Cracking) in austenitic piping welds has been a challenge for BWR-type nuclear power plants for over a decade. Dissimilar metal (DM) welds have also recently become a major concern since PWSCC (Primary Water Stress Corrosion Cracking) was found in nozzle-to-pipe welds in PWR-type nuclear plants worldwide. Nuclear regulatory bodies, including the NRC in the United States, have mandated the use of qualifi ed procedures for in-service inspections (ISI) of piping welds susceptible to IGSCC and PWSCC.

To address these regulations, Zetec has developed qualifi ed solutions for encoded, manually driven, phased array, UT examination for homogeneous (carbon steel and stainless steel) and DM piping welds.

The qualifi cation for austenitic and ferritic piping welds (obtained at PDI according to ASME Code Section XI, Appendix VIII, Supplements 2 and 3) covers detection and length sizing in ferritic and austenitic piping welds, from 12” to 36” NPS, and for wall thicknesses from 0.6” to 3.0”.

The qualifi cation for DM welds (obtained at PDI according to ASME Code Section XI, Appendix VIII, Supplement 10) covers detection, length sizing and through-wall sizing of circumferential and axial cracks in dissimilar metal piping welds from the outside surface, for diameters 1.5” NPS and up, and for wall thicknesses from 0.210” to 6.50“ (5.3 to 165.1 mm). The procedure is applicable for DM welds in both PWR and BWR nuclear plants and was the fi rst one qualifi ed for Supplement 10 that uses phased array UT technology.

Zetec offers complete equipment kits (phased array equipment, software, scanner, probes, wedges, cabling) to conduct in-service inspections according to the qualifi ed procedures. Both procedures were developed in collaboration with EPRI, and are commercially available to our customers. We also offer basic training about the hardware and software, as well as dedicated analysis training in preparation of a PDI qualifi cation.



Ordering Information > PDI CS and SS Piping Welds

54 > UT > PDI-Qualifi ed Procedures & Equipment > PDI CS and SS Piping Welds

.


UT > PDI-Qualifi ed Procedures & Equipment > PDI CS and SS Piping Welds > 55





1340-30-0050 ZPA-ACC-SPLTCBL-OMNIT2HYP64 Splitter cable for AS probes (EWUXE075A) – takes 2 × 64 channel connections of the OmniScan PA male connector into 2 Hypertronics connectors (1-64 and 65-128)

10024529 (3 units required)

ZPA-PB2D1.5M5x3E17.5-9-REX-5M-HYP_1 1.5M5x3E17.5-9, 2-D Matrix Array Probe – 1.5 MHz – 15 elements – active surface of 0.69 in. × 0.35 in. or 18 mm × 9 mm – Hypertronics connector – 5 m cable

780-2025-050 ZPA-ACC-FORKKIT-CS&SS Fork set to interface any of the CS & SS piping wedge assemblies with MPS

780-2025-098 ZPA-ACC-W-CS&SS-KIT6TO8 Wedge assembly set for pipes from 6" to 8" (excluded) – NOT FORMALLY QUALIFIED



780-2025-101 ZPA-ACC-W-CS&SS-KIT12TO16 Wedge assembly set for pipes from 12" to 16" (included)

780-2025-102 ZPA-ACC-W-CS&SS-KIT16TO36 Wedge assembly set for pipes larger than 16" and up to 36"

950-8001 ZGN-ACC-CALBLK-SS-28 Dedicated Zetec Phased Array Calibration Block: 28", SS

950-8002 ZGN-ACC-CALBLK-SS-16 Dedicated Zetec Phased Array Calibration Block: 16", SS

950-8005 ZGN-ACC-CALBLK-SS-12 Dedicated Zetec Phased Array Calibration Block: 12", SS – NOT FORMALLY QUALIFIED




950-8003 ZGN-ACC-CALBLK-CS-28 Dedicated Zetec Phased Array Calibration Block: 28", CS

950-8004 ZGN-ACC-CALBLK-CS-16 Dedicated Zetec Phased Array Calibration Block: 16", CS

950-8020 ZGN-ACC-CALBLK-REX Rexolite Reference Block

Ordering Information > PDI CS and SS Piping Welds


56 > UT > PDI-Qualifi ed Procedures & Equipment > PDI DMW





1372-70-0011 ZGN-SCN-MPS-XLL16-36IN Manual Pipe Scanner – Extra Long Links Set – 16 to 36 in.


10027561 ZPA-ACC-SPLTCBL-OMNIT2HYP64-CL1 Dedicated splitter cable for CL probes (EWUXE082A) – takes 2 × 64 channel connections of the OmniScan PA male connector into 2 Hypertronics connectors (1 -64 and 65-128)

1340-30-0065 ZPA-ACC-SPLTCBL-OMNIT2HYP64-CL2 Dedicated splitter cable for CL probes on pipe diameter > 40 in. (EWUXE109A) – takes 2 × 64 channel connections of the OmniScan male connector into 2 Hypertronics connectors (1-64 and 65-128)

1340-30-0070 ZPA-ACC-SPLTCBL-OMNIT2HYP32-CS Dedicated splitter cable for CS probes (EWUXE083A) – takes 2 × 32 channel connections of the OmniScan PA male connector into 2 Hypertronics connectors (1-32 and 65-96)

10027562 ZPA-ACC-SPLTCBL-OMNIT2HYP32-AL Dedicated splitter cable for AL probes (EWUXE084A) – 2 × 32 channel connections of the OmniScan PA male connector into 2 Hypertronics connectors (1-32 and 65-96)

1340-30-0050 ZPA-ACC-SPLTCBL-OMNIT2HYP64 Splitter cable for AS probes (EWUXE075A) – takes 2 × 64 channel connections of the OmniScan PA male connector into 2 Hypertronics connectors (1-64 and 65-128)


ZPA-PB2D1.5M32x2E64-15-REX-5M-HYP_1 1.5M32x2E64-15, 2-D Matrix Array Probe – 1.5 MHz – 64 elements – active surface of 2.52 in. × 0.59 in or 64 mm × 15 mm – Hypertronics connector – 5 m cable


ZPA-PB2D1.5M16x2E32-7-REX-5M-HYP_1 1.5M16x2E32-7, 2-D Matrix Array Probe – 1.5 MHz – 32 elements – active surface of 1.26 in. × 0.28 in. or 32 mm × 7 mm – Hypertronics connector – 5 m cable


ZPA-PB2D1.5M8x4E28-16-REX-5M-HYP_1 1.5M8x4E28-16, 2-D Matrix Array Probe – 1.5 MHz – 32 elements – active surface of 1.10 in × 0.63 in or 28 mm × 16 mm – Hypertronics connector – 5 m cable (price for 2 probes)


ZPA-PB2D1.5M5x3E17.5-9-REX-5M-HYP_1 1.5M5x3E17.5-9, 2-D Matrix Array Probe – 1.5 MHz – 15 elements – active surface of 0.69 in × 0.35 in or 18 mm × 9 mm – Hypertronics connector – 5 m cable

780-2025-055 ZPA-ACC-FORK-CL1 Fork to interface any wedge assembly with CL probes (for circ. Flaws) with MPS

780-2025-060 ZPA-ACC-FORK-CL2 Fork to interface any wedge assembly with CL probes (only for axial fl aws in confi gurations with diameters > 40") with MPS

780-2025-065 ZPA-ACC-FORK-CS Fork to interface any wedge assembly with CS probes with MPS

780-2025-070 ZPA-ACC-FORK-AL Fork to interface any wedge assembly with AL probes with MPS

780-2025-075 ZPA-ACC-FORK-AS Fork to interface any wedge assembly with AS probes with MPS

Ordering Information > PDI DMW


UT > PDI-Qualifi ed Procedures & Equipment > PDI DMW > 57

780-2025-121 ZPA-ACC-W-DMW-KITU2 Wedge assembly set for weld confi gurations with diameters 2" or less

780-2025-122 ZPA-ACC-W-DMW-KIT4TO6 Wedge assembly set for weld confi gurations from 4” to 6” (inclusive)

780-2025-123 ZPA-ACC-W-DMW-KIT8TO12 Wedge assembly set for weld confi gurations from 8” (inclusive) to 12” (exclusive)

780-2025-124 ZPA-ACC-W-DMW-KIT12TO16 Wedge assembly set for weld confi gurations from 12” to 16” (inclusive)

780-2025-125 ZPA-ACC-W-DMW-KIT16TO40 Wedge assembly set for weld confi gurations from 16” (exclusive) to 40” (exclusive)

780-2025-126 ZPA-ACC-W-DMW-KITO40 Wedge assembly set for weld confi gurations larger than 40” (inclusive)

10022362 ZGN-ACC-CALBLK-DMW-CIRC-U2 Calibration block EPRI, type 2-AXIAL, for circ. fl aw techniques on confi gurations with diameters 2" or less

10022363 ZGN-ACC-CALBLK-DMW-CIRC-4TO6 Calibration block EPRI, type 4-AXIAL, for circ. fl aw techniques on confi gurations from 4” to 6” (inclusive)

10022364 ZGN-ACC-CALBLK-DMW-CIRC-8TO12 Calibration block EPRI, type 8-AXIAL, for circ. fl aw techniques on confi gurations from 8” (inclusive) to 12” (exclusive)

10022365 ZGN-ACC-CALBLK-DMW-CIRC-12TO16 Calibration block EPRI, type 12-AXIAL, for circ. fl aw techniques on confi gurations from 12” to 16” (inclusive)

10022367 ZGN-ACC-CALBLK-DMW-CIRC-16TO40 Calibration block EPRI, type 24-AXIAL, for circ. fl aw techniques on confi gurations from 16” (exclusive) to 40” (inclusive)

10022368 ZGN-ACC-CALBLK-DMW-AX-U2 Calibration block EPRI, type 2-CIRC, for axial fl aw techniques on confi gurations with diameters 2" or less

10022369 ZGN-ACC-CALBLK-DMW-AX-4TO6 Calibration block EPRI, type 4-CIRC, for axial fl aw techniques on confi gurations from 4” to 6” (inclusive)

10022370 ZGN-ACC-CALBLK-DMW-AX-8TO12 Calibration block EPRI, type 8-CIRC, for axial fl aw techniques on confi gurations from 8” (inclusive) to 12” (exclusive)

10022371 ZGN-ACC-CALBLK-DMW-AX-12TO16 Calibration block EPRI, type 12-CIRC, for axial fl aw techniques on confi gurations from 12” to 16” (inclusive)

10022372 ZGN-ACC-CALBLK-DMW-AX-16TO40 Calibration block EPRI, type 24-CIRC, for axial fl aw techniques on confi gurations from 16” (exclusive) to 40” (inclusive)

950-8050 ZGN-ACC-CALBLK-DMW-O40 Calibration block, type Zetec fl at T=120 mm, for circ. and axial fl aw techniques on confi gurations larger than 40” (inclusive)

950-8020 ZGN-ACC-CALBLK-REX Rexolite Reference Block

1898-05-19-1 ZPA-ACC-PROC-DMW PDI qualifi ed phased array procedure on DM piping welds: includes all focal law fi les, OmniScan setup fi les and Scanplans for qualifi ed confi gurations, and use of existing data fi les at PDI for up to 4 personnel qualifi cations

Ordering Information > PDI DMW

UT > TOFD INSPECTIONS

Zetec offers a limited product line of high-quality UT probes and dedicated wedges for TOFD.

In addition, we offer a complete equipment kit (portable UT equipment, scanner, probes, wedges) for performing semi-automated TOFD inspections on various carbon steel welds.

10024531 ZUT-PB-TOF5-3-LEMO00 TOF5-3, Conventional UT probe for TOFD inspection – 5 MHz – active surface diameter 3 mm – Lemo00 connector – no cable – price for 2 probes


10024533 ZUT-PB-TOF7.5-3-LEMO00 TOF7.5-3, Conventional UT probe for TOFD inspection – 7.5 MHz – active surface diameter 3 mm – Lemo00 connector – no cable – price for 2 probes

10024534 ZUT-PB-TOF7.5-6-LEMO00 TOF7.5-6, Conventional UT probe for TOFD inspection – 7.5 MHz – active surface diameter 6 mm – Lemo00 connector – no cable – price for 2 probes




10024693 ZUT-ACC-W-TOF-30LW Wedge for UT probe of type ZUT-PB-TOFX-Y-LEMO00 – nominal 30-degree longitudinal wave – interfaces with scanner ZUT-SCN-TOFDMAN-8IN – with irrigation – price for 2 wedges




Ordering Information > TOFD Probes and Wedges

58 > UT > TOFD Inspections > TOFD Probes and Wedges

UT > TOFD INSPECTIONS

UT > TOFD Inspections > TOFD Scanner / TOFD Inspection Kit > 59

10024431 ZUT-SCN-TOFDMAN-8IN Manual single-axis TOFD scanner for one set of probes – Length 8 inches – Encoder with 5 m cable

1342-00-0021 ZUT-UIT-OMNISCAN-2CH OmniScan UT system, 2 conventional UT channels – 2 Lemo00 UT connectors – includes basic UT software but not the dedicated TOFD package – includes accessory kit OMNI-A-ACC1


10024431 ZUT-SCN-TOFDMAN-8IN Manual single-axis TOFD scanner for one set of probes – Length 8 inches – Encoder with 5 m cable




Ordering Information > TOFD Scanner

Ordering Information > TOFD Inspection Kit

UT > GENERIC ACCESSORIES

On top of its class-leading products, Zetec also provides various accessories for these products.

You will fi nd below a few of those accessories, but do not hesitate to contact Zetec for more information on our wide variety of accessories.

1390-40-0010 ZPA-ACC-SPLTBOX-HYPT4HYP Breakout box (4:1) and 2 m PA cable (128 micro-coax) – Connects 4 phased array probes to the Tomoscan III PA – also compatible with OmniScan PA and Z-Scan PA with the use of OMNI-A-ADP03 – channel distribution 1-32 / 33-64 / 65-96 / 97-128

1390-40-0020 ZPA-ACC-SPLTBOX-HYPT6HYP Breakout box (6:1) and 2m PA cable (128 micro-coax) – Connects 6 phased array probes to Tomoscan III PA – also compatible with OmniScan PA and Z-Scan PA with the use of OMNI-A-ADP03 – channel distribution 1-32 / 33-48 / 49-64 / 65-96 / 97-112 / 113-128

1390-30-0020 ZPA-ACC-SPLTCBL-HYPT16BNC-1FT Dedicated cable with 1 Hypertronics to 16 BNC – 1 ft (0.3 m) long -compatible with Tomoscan FOCUS system, Tomoscan III PA system and OmniScan PA system when using the Omni-A-ADP03

1390-30-0030 ZPA-ACC-SPLTCBL-HYPT16LEMO-1FT Dedicated cable with 1 Hypertronics to 16 Lemo00 – 1 ft (0.3 m) long -compatible with Tomoscan FOCUS system, Tomoscan III PA system and OmniScan PA system when using the Omni-A-ADP03

10021914 ZPA-ACC-SPLTCBL-OMNIT16LEMO Dedicated splitter cable that takes OmniScan PA male connector into 16 Lemo – compatible with OmniScan PA and Z-Scan PA system

1390-30-0040 ZPA-ACC-SPLTCBL-HYPT2HYP64 Dedicated Splitter Cable (1 Hyp. male to 2 Hyp. female) – takes 128 channel channels of the Hyp. male connector splits them into 2 Hyp. Connectors (1 to 64, and 65 to 128)

1390-30-0050 ZPA-ACC-SPLTCBL-HYPT2HYP4LEMO Dedicated Splitter Cable (1 Hyp. male to 2 Hyp. female and 4 Lemo00) – takes 128 channels of the Hyp. male connector splits them into 2 Hyp. connectors (3 to 64, and 67 to 128) and 4 Lemo00 (channels 1, 2, 64 and 65)

10027814 ZUT-ACC-RPR2-5810-KIT Ultrasonic pulser and preamplifi er kit for TOFD applications – Can support one or two pairs of TOFD probes – Features: 200 Volts, 40dB gain, 12V DC input operation, 500KHz-30MHz bandwidth – Includes 5 m power supply cable for linking to OmniScan

Ordering Information > Generic UT Accessories

60 > UT > Generic Accessories

Surface Inspections with ECA Probes

> Reduce inspection time

> Improve fl aw detection

> Simplifi ed inspections of rough or irregular surfaces

> Computer-based data records and reports

ECA probes use a number of individual coils grouped together in one assembly. The coils work

together to scan a wider inspection area than conventional probes. Data from ECA probes is

transmitted directly from the probe to computer memory for record keeping and graphic, color-

coded reports.

Coils can be mounted on fl exible substrates that adapt to irregular surfaces. These probes

can be used to inspect critical surfaces and surface junctions on pipes, pressure vessels, turbines,

and other mission-critical infrastructure. In many applications, ECA testing can replace liquid dye

penetrant or magnetic particle testing and eliminate the time and effort of surface preparation.

ECA probes eliminate one axis of motion by using multiple coils to cover a wider area

and increase the inspection rate. In many cases, a simpler, lower-cost, one-axis manual scanner

can replace two-axis automated scanners. ECAs can be built in the exact shape of a particular

part for simplifi ed, one-pass inspections.

Zetec can customize probes for your specifi c inspection application.

ECA > Introduction > 61

EDDY CURRENT ARRAY > INTRODUCTION

ECA > SYSTEMS

62 > ECA > Systems > MS 5800 MultiScan

MS 5800 MultiScan™

Handles ECT arrays with up to 64 channels>

4-frequency Eddy Current operation>

Electronic probe balancing: External reference probe > is unnecessary for absolute channel operation

Options for Remote Field Eddy Current (RFT), > Magnetic Flux Leakage (MFL), and UT for corrosion mapping of tubes

The MS 5800 also handles Eddy Current Array Probes with up to 64 channels. This technology allows fast and effi cient inspection of surfaces with Eddy Current. Encoder inputs record the probe position for accurate imaging of the inspections in C-scan displays.

Acquisition and analysis are both performed from a standard computer using Zetec’s ECVision or MultiView software. Both software packages allow for high volume data storage on any PC-compatible media.

Zetec’s MultiScan MS 5800 is a portable, multitechnology NDE (nondestructive evaluation) instrument. It’s suitable for many applications, including tube inspection with standard ECT bobbins or rotating probes (MRPC®). In addition to ECT, the MS 5800 also has options for Remote Field Eddy Current (RFT), Magnetic Flux Leakage (MFL), and UT for corrosion mapping of tubes. Each one of these technologies provides unique capabilities that allow using the best technology for the inspection situation. For automated inspections, the MS 5800 is compatible with probe pushers and scanners. Two built-in encoder inputs record probe position for accurate location of detected fl aws.

10023591 ZEC-RDT-MS5800-1U MultiScan MS5800 with 1 UT channel (BNC); including user's manuals, carrying case, Ethernet link, power cord and coaxial cable. Data analysis software programs not included.

10023594 ZEC-RDT-MS5800-E MultiScan MS5800 with ECT; including user's manuals, carrying case, Ethernet link, power cord and ECT probe adapters. Data analysis software programs not included.

10023596 ZEC-RDT-MS5800-E1U MultiScan MS5800 with ECT and 1 UT channel (BNC); including user's manuals, carrying case, Ethernet link, power cord, ECT probe adapters and coaxial cable. Data analysis software programs not included.

Ordering Information > MS 5800 MultiScan

ECA > SYSTEMS

ECA > Systems > MS 5800 MultiScan > 63

10023599 ZEC-RDT-MS5800-ER MultiScan MS5800 with ECT, RFT, and MFL; including user's manuals, carrying case, Ethernet link, power cord ECT and RFT probe adapters. Data analysis software programs not included.

10023600 ZEC-RDT-MS5800-ER1U MultiScan MS5800 with ECT, RFT, MFL and 1 UT channel (BNC); including user's manuals, carrying case, Ethernet link, power cord ECT, RFT probe adapters and coaxial cable. Data analysis software programs not included.

10023603 ZEC-RDT-MS5800-R MultiScan MS5800 with RFT and MFL; including user's manuals, carrying case, Ethernet link, power cord and RFT probe adapter. Data analysis software programs not included.

10023604 ZEC-RDT-MS5800-R1U MultiScan MS5800 with RFT, MFL and 1 UT channel (BNC); including user's manuals, carrying case, Ethernet link, power cord, RFT probe adapter and coaxial cable. Data analysis software programs not included.

Ordering Information > MS 5800 MultiScan

ECA > SYSTEMS

64 > ECA > Systems > TC7700

TC7700™

Up to 256 Eddy Current channels>

Up to 8 frequencies>

Encoder-based data acquisition>

Supports X-Probe® and other eddy current > array probes

Zetec’s TC7700 is an advanced eddy current instrument designed for inspecting components using eddy current array probes.

Eddy Current Array probes have a large number of coils and can generate from 10 to 50 times more data than standard ET probes. The TC7700 generates the complex time-multiplexed coil drives that array probes can require and has enough on-board processing power to demodulate and process the large numbers of data channels that these probes produce.

10023631 ZEC-RDT-TC7700-12D_M11_P700 TC7700 ECT RDAU – base model – includes MIM11 and PIM700. Used for ECT applications, up to 2 ABS/DIFF bobbin probes, 2 multicoil RPCs or 1 X-probe. 4 generator outputs, 8 receive inputs, 128 multiplexed coils, and 512 EC channels.

Ordering Information > TC7700

ECA > SYSTEMS

ECA > Systems > Eddy Current Array Multiplexers > 65

Eddy Current Array Multiplexers

Use array probes with the MS5800 or TC7700>

Can be used as a repeater>

Supports 16 time slots>

Multiplexers permit a large number of eddy current channels to be input to an eddy current tester possessing a limited number of physical inputs. This makes eddy current array probes possible and is accomplished by time multiplexing the large number of eddy current signals generated from the probe.

The 64-channel multiplexer allows the MS5800 or TC7700 instruments to operate up to 64 channels while using only 4 physical inputs.

The 128-channel multiplexer allows the TC7700 instrument to operate up to 128 channels while using 8 physical inputs.

10024126 ZES-ACC-MUX-64-001-TR-001 Multiplexer 64 TR channels (4×16 inputs)

10028215 ZES-ACC-MUX-64-001-ABS-001 Multiplexer 64 ABS channels (4×16 inputs)

10028216 ZES-ACC-MUX-64-001-TR/ABS-001 Multiplexer 64 ABS/TR channels (4×16 inputs)

10028217 ZES-ACC-MUX-64-001-DIFF-001 Multiplexer 32 DIFF channels (2×16 inputs)

10028218 ZES-ACC-MUX-64-001-DIFF-002 Multiplexer 32 DIFF channels (4×8 inputs)

10024134 ZES-ACC-MUX-128 Multiplexer 128 channels with Control Sequence

10024148 ZES-ACC-MUX-128-CBL-RGD-6m Cable (orange ruggedized) for ZEC-ACC-MUX-128, 6m total length.

10030923 ZES-ACC-MUX-128-CBL-10m Cable (spiral regular) for ZEC-ACC-MUX-128, 10m total length.

10024149 ZES-ACC-MUX-64-CBL-10m Cable for ZEC-ACC-MUX-64, 10m total length.




Ordering Information > Eddy Current Array Multiplexers

ECA > SOFTWARE

66 > ECA > Software > ECVision

ECVision®

Advanced analysis software

for eddy current array probes

Display of false color and 3D C-scans>

Editable depth curves>

Scalable high resolution lissajous and strip > chart displays

Defect sizing with cursors and rulers>

Unlimited screen combinations>

ECVision is an advanced data acquisition and analysis program specifi cally designed for surface inspections with eddy current array (ECA) probes. ECA probes are used in lieu of magnetic particle, liquid-penetrant, and single-element ET because they signifi cantly shorten inspection times and greatly improve fl aw detection. ECVision is the engine of choice to drive fast and effective inspections with ECA probes.

ECVision combines data analysis, display, and reporting in a user-friendly Windows-based environment. The program offers innovative features for sizing and locating fl aws, and numerous ways of displaying data: lissajous, strips charts, C-scans, etc.

10024168 ZES-SWS-ECV-1-ADV-USB ECVision 1 Software License for Advanced Version – USB Hard Key – Eddy current data analysis and reporting software. Supports C-Scan analysis when using eddy current array probes. Data acquisition and read-back for MS5800 and TC7700 instruments.

Ordering Information > ECVision

ECA > PROBES

ECA > Probes > Flexible ECA Probe for Weld Inspections > 67

Flexible ECA Probe for Weld Inspections

Reduce inspection time>

Improve fl aw detection>

Detect axial and transverse cracks, pitting > and surface material voids

Flexible surface for reduced lift-off>

Easy inspection of rough irregular surfaces>

“One-pass” inspection of weld bead, transition zone, > and heat affected zone

For weld surfaces, Zetec’s eddy current array (ECA) probes allow you to reduce inspection time and improve fl aw detection, all the while providing you with a full record of inspection.

Zetec’s array probes offer many advantages when used in lieu of magnetic particle, liquid penetrant, or single-element ET probes. They offer simple “one-pass” inspections of the weld bead, transition zone, and heat-affected zone. Their proprietary fl exible design allows them to conform to the weld surface where they can detect pitting and surface cracks in any orientation.

ECA probes transmit their data directly to an acquisition system, where they are analyzed and stored. Zetec offers a complete line of eddy current inspection instruments as well as advanced eddy current analysis software.

10029442 ZES-P-FLEX-WELD-5-002 Flexible TR Probe for weld inspection (high resolution). 40mm coverage with maximum height fl exibility of 5 mm. Defect detection in axial and perpendicular orientations.

10029440 ZES-P-FLEX-WELD-5-003 Flexible TR Probe for weld inspection. 55 mm coverage with maximum height fl exibility of 5 mm. Defect detection in all orientations.

10023759 ZES-P-FLEX-WELD-10-001 Flexible TR Probe for weld inspection. 58mm coverage with maximum height fl exibility of 10 mm. Defect detection in axial and perpendicular orientations.

Ordering Information > Flexible ECA Probe for Weld Inspections

ECA > PROBES

68 > ECA > Probes > Flexible ECA Probe for Turbine Inspections

Flexible ECA Probe for Turbine Inspections

Reduce inspection time>

Improve fl aw detection>

Detect axial and transverse cracks, pitting > and surface material voids

Flexible surface for reduced lift-off>

“One-pass” inspection of weld bead, transition zone, > and heat affected zone

For turbine surfaces, Zetec’s eddy current array (ECA) probes allow you to reduce inspection time and improve fl aw detection, all the while providing you with a full record of inspection.

Zetec’s array probes offer many advantages when used in lieu of magnetic particle, liquid penetrant, or single-element ET probes. They offer simple “one-pass” inspections on blades, wheels, or any other smooth surface. Their proprietary fl exible design allows them to conform to arbitrary convex and concave surfaces where they can detect pitting, fi ssures and surface cracks in any orientation.

ECA probes transmit their data directly to an acquisition system, where they are analyzed and stored. Zetec offers a complete line of eddy current inspection instruments as well as advanced eddy current analysis software.

10023756 ZES-P-S_FLEX-CVX_CCV-140-001 Semi-fl exible TR Probe. Max convex/concave radius 140 mm. Defect detection in axial and perpendicular orientations.

10023757 ZES-P-S_FLEX-CVX-65-TWIST-001 Semi-fl exible TR Probe with 120mm coverage. Max convex radius 65 mm. Supports axial twist. Defect detection in axial and perpendicular orientations.

Ordering Information > Flexible ECA Probe for Turbine Inspections

Zetec distinguishes itself from the competition by providing industry-leading training

in advanced UT and surface inspection ECT techniques. Various inspection techniques in use today

were developed with the help of Zetec during the course of our training sessions.

Moreover, Zetec provides calibration services compliant with the ISO 17025 calibration

laboratory standards. This ensures that our calibration procedures are reproducible and traceable

to international standards.

Our experience in training and dedication to standard-setting objectives sets Zetec apart

in a world where most NDE equipment vendors simply “ship and forget.” We put our knowledge

in your hands every day so that you can become more profi cient and effective when time is of

the essence.

SERVICES > INTRODUCTION

Services > Introduction > 69

SERVICES > UT TRAINING

70 > Services > UT Training

To go with its class-leading products, Zetec also provides various trainings.

You will fi nd below a few of those trainings, but do not hesitate to contact Zetec for more information.

10027888 ZPA-ACC-TRAINING-STDPA Standard training (1 week) on OmniScan PA and UltraVision 1

10027887 ZPA-ACC-TRAINING-CS&SS Dedicated training (1 week) on phased array procedure for CS & SS piping welds, including preparation of focal laws with Advanced PA Calculator and dedicated data analysis training

10027889 ZPA-ACC-TRAINING-DMW Dedicated training (1 week) on phased array procedure for DM piping welds, including preparation of focal laws with Advanced PA Calculator and dedicated data analysis training

Ordering Information > UT Training

SERVICES > CALIBRATION

Services > Calibration > 71

Zetec offers calibration services on all its UT and surface inspection instruments.

To take advantage from these services, simply refer to the ordering information indicated in the following pages.

10024421 ZPA-RDT-DYNARAY-64/64PR-CAL DYNARAY 64/64PR – Calibration Certifi cation




10024425 ZPA-RDT-DYNARAY-64/64PR-ASFAL ASFAL DYNARAY 64/64PR – Calibration Certifi cation




1320-07-0064 ZPA-RDT-TOMO3-32/64PR-CAL TOMOSCAN III PA, 32/64 CALIBRATION CERTIFICATION

1320-07-0128 ZPA-RDT-TOMO3-32/128PR-CAL TOMOSCAN III PA, 32/128 CALIBRATION CERTIFICATION

1320-07-1064 ZPA-RDT-TOMO3-32/64PR-ASFAL ASFAL TOMOSCAN III PA, 32/64 CALIBRATION CERTIFICATION

1320-07-1128 ZPA-RDT-TOMO3-32/128PR-ASFAL ASFAL TOMOSCAN III PA, 32/128 CALIBRATION CERTIFICATION

1320-07-1000 ZPA-RDT-TOMO3-32/128PR-CODE Tomoscan III PA Code-Related Tests

10021842 ZPA-RDT-ZSCAN-16/128-CAL Z-Scan-PA 16/128 CALIBRATION CERTIFICATION

10021843 ZPA-RDT-ZSCAN-16/128PR-CAL Z-Scan-PA 16/128 PR CALIBRATION CERTIFICATION





Ordering Information > DYNARAY Calibration

Ordering Information > Tomoscan III PA Calibration

Ordering Information > Z-Scan PA Calibration

10024405 ZPA-UIT-OMNISCAN-16/64-CAL OmniScan PA 16/64 for manual inspection – CALIBRATION CERTIFICATION

10024406 ZPA-UIT-OMNISCAN-16/64PR-CAL OmniScan PA 16/64 PR for manual inspection – CALIBRATION CERTIFICATION

10021856 ZPA-UIT-OMNISCAN-16/16-CAL OmniScan PA 16/16 for manual inspection – CALIBRATION CERTIFICATION

1340-07-0128 ZPA-UIT-OMNISCAN-16/128-CAL OmniScan PA 16/128 CALIBRATION CERTIFICATION

10021857 ZPA-UIT-OMNISCAN-32/32-CAL OmniScan PA 32/32 CALIBRATION CERTIFICATION

10021858 ZPA-UIT-OMNISCAN-32/128-CAL OmniScan PA 32/128 CALIBRATION CERTIFICATION

1340-07-0016 ZPA-UIT-OMNISCAN-16/128PR-CAL OmniScan PA 16/128 PR CALIBRATION CERTIFICATION

10021859 ZPA-UIT-OMNISCAN-32/128PR-CAL OmniScan PA 32/128 PR CALIBRATION CERTIFICATION

10024407 ZPA-UIT-OMNISCAN-16/64-MOD-CAL OmniScan PA 16/64 for manual inspection (Module Only) – CALIBRATION CERTIFICATION

10024408 ZPA-UIT-OMNISCAN-16/64PR-MOD-CAL OmniScan PA 16/64PR for manual inspection (Module Only) – CALIBRATION CERTIFICATION

10021865 ZPA-UIT-OMNISCAN-16/16-MOD-CAL OmniScan PA 16/16 for manual inspection (Module Only) – CALIBRATION CERTIFICATION

10021866 ZPA-UIT-OMNISCAN-16/128-MOD-CAL OmniScan PA 16/128 (Module Only) CALIBRATION CERTIFICATION



10021867 ZPA-UIT-OMNISCAN-16/128PR-MOD-CAL OmniScan PA 16/128 PR (Module Only) CALIBRATION CERTIFICATION

Ordering Information > OmniScan PA Calibration


72 > Services > Calibration



10021879 ZPA-RDT-ZSCAN-16/128-ASFAL ASFAL Z-Scan-PA 16/128 CALIBRATION CERTIFICATION

10021880 ZPA-RDT-ZSCAN-16/128PR-ASFAL ASFAL Z-Scan-PA 16/128 PR CALIBRATION CERTIFICATION







Ordering Information > Z-Scan PA Calibration



1330-07-0008 ZUT-RDT-TOMO3-8CH-CAL TOMOSCAN III UT-8 CHANNEL CALIBRATION CERTIFICATION

1330-07-0016 ZUT-RDT-TOMO3-16CH-CAL TOMOSCAN III UT-16 CHANNEL CALIBRATION CERTIFICATION

1330-07-1108 ZUT-RDT-TOMO3-8CH-ASFAL ASFAL TOMOSCAN III UT-8 CHANNEL CALIBRATION CERTIFICATION

1330-07-1116 ZUT-RDT-TOMO3-16CH-ASFAL ASFAL TOMOSCAN III UT-16 CHANNEL CALIBRATION CERTIFICATION

1330-07-1008 ZUT-RDT-TOMO3-8CH-CRT Tomoscan III UT 8-ch Code-Related Tests

1330-07-1016 ZUT-RDT-TOMO3-16CH-CRT Tomoscan III UT 16-ch Code-Related Tests

10021870 ZPA-UIT-OMNISCAN-32/128PR-MOD-CAL OmniScan PA 32/128 PR (Module Only) CALIBRATION CERTIFICATION

10024410 ZPA-UIT-OMNISCAN-16/64-ASFAL ASFAL OmniScan PA 16/64 for manual inspection – CALIBRATION CERTIFICATION

10024411 ZPA-UIT-OMNISCAN-16/64PR-ASFAL ASFAL OmniScan PA 16/64 PR for manual inspection – CALIBRATION CERTIFICATION

10021893 ZPA-UIT-OMNISCAN-16/16-ASFAL ASFAL OmniScan PA 16/16 for manual inspection – CALIBRATION CERTIFICATION

1340-07-1128 ZPA-UIT-OMNISCAN-16/128-ASFAL ASFAL OmniScan PA 16/128 CALIBRATION CERTIFICATION

10021894 ZPA-UIT-OMNISCAN-32/32-ASFAL ASFAL OmniScan PA 32/32 CALIBRATION CERTIFICATION

10021895 ZPA-UIT-OMNISCAN-32/128-ASFAL ASFAL OmniScan PA 32/128 CALIBRATION CERTIFICATION

1340-07-1016 ZPA-UIT-OMNISCAN-16/128PR-ASFAL ASFAL OmniScan PA 16/128 PR CALIBRATION CERTIFICATION

10021896 ZPA-UIT-OMNISCAN-32/128PR-ASFAL ASFAL OmniScan PA 32/128 PR CALIBRATION CERTIFICATION

10024412 ZPA-UIT-OMNISCAN-16/64-MOD-ASFAL ASFAL OmniScan PA 16/64 for manual inspection (Module Only) – CALIBRATION CERTIFICATION

10024413 ZPA-UIT-OMNISCAN-16/64PR-MOD-ASFAL ASFAL OmniScan PA 16/64PR for manual inspection (Module Only) – CALIBRATION CERTIFICATION

10021902 ZPA-UIT-OMNISCAN-16/16-MOD-ASFAL ASFAL OmniScan PA 16/16 for manual inspection (Module Only) – CALIBRATION CERTIFICATION

10021903 ZPA-UIT-OMNISCAN-16/128-MOD-ASFAL ASFAL OmniScan PA 16/128 (Module Only) CALIBRATION CERTIFICATION



10021904 ZPA-UIT-OMNISCAN-16/128PR-MOD-ASFAL ASFAL OmniScan PA 16/128 PR (Module Only) CALIBRATION CERTIFICATION

10021907 ZPA-UIT-OMNISCAN-32/128PR-MOD-ASFAL ASFAL OmniScan PA 32/128 PR (Module Only) CALIBRATION CERTIFICATION

10021864 ZUT-UIT-OMNISCAN-MX-CAL OmniScan Main Frame (OMNI-MX only) CALIBRATION CERTIFICATION

Ordering Information > Tomoscan III UT Calibration

Ordering Information > OmniScan PA Calibration



10021850 ZUT-RDT-ZSCAN-2CH-CAL Z-Scan UT 2ch CALIBRATION CERTIFICATION

10021853 ZUT-RDT-ZSCAN-2CH-R-CAL Z-Scan UT 2ch with Remote Option CALIBRATION CERTIFICATION





10021887 ZUT-RDT-ZSCAN-2CH-ASFAL ASFAL Z-Scan UT 2ch CALIBRATION CERTIFICATION

10021890 ZUT-RDT-ZSCAN-2CH-R-ASFAL ASFAL Z-Scan UT 2ch with Remote Option CALIBRATION CERTIFICATION





10021860 ZUT-UIT-OMNISCAN-2CH-CAL OmniScan UT 2 ch CALIBRATION CERTIFICATION



10021871 ZUT-UIT-OMNISCAN-2CH-MOD-CAL OmniScan UT 2 ch (Module Only) CALIBRATION CERTIFICATION



10021897 ZUT-UIT-OMNISCAN-2CH-ASFAL ASFAL OmniScan UT 2 ch CALIBRATION CERTIFICATION



10021908 ZUT-UIT-OMNISCAN-2CH-MOD-ASFAL ASFAL OmniScan UT 2 ch (Module Only) CALIBRATION CERTIFICATION



Ordering Information > Z-Scan UT Calibration

Ordering Information > OmniScan UT Calibration



10023655 ZEC-RDT-MS5800-E-CAL MS5800-E CALIBRATION CERTIFICATION

10023656 ZEC-RDT-MS5800-ES-CAL MS5800-ES CALIBRATION CERTIFICATION

10023657 ZEC-RDT-MS5800-R-CAL MS5800-R CALIBRATION CERTIFICATION

10023658 ZEC-RDT-MS5800-1U-CAL MS5800-1U CALIBRATION CERTIFICATION



10023661 ZEC-RDT-MS5800-ER-CAL MS5800-ER CALIBRATION CERTIFICATION

10023662 ZEC-RDT-MS5800-E1U-CAL MS5800-E1U CALIBRATION CERTIFICATION



10023665 ZEC-RDT-MS5800-R1U-CAL MS5800-R1U CALIBRATION CERTIFICATION



10023668 ZEC-RDT-MS5800-ER1U-CAL MS5800-ER1U CALIBRATION CERTIFICATION



10023671 ZEC-RDT-MS5800-E-ASFAL ASFAL MS5800-E CALIBRATION CERTIFICATION

10023672 ZEC-RDT-MS5800-ES-ASFAL ASFAL MS5800-ES CALIBRATION CERTIFICATION

10023673 ZEC-RDT-MS5800-R-ASFAL ASFAL MS5800-R CALIBRATION CERTIFICATION

10023674 ZEC-RDT-MS5800-1U-ASFAL ASFAL MS5800-1U CALIBRATION CERTIFICATION



10023677 ZEC-RDT-MS5800-ER-ASFAL ASFAL MS5800-ER CALIBRATION CERTIFICATION

10023678 ZEC-RDT-MS5800-E1U-ASFAL ASFAL MS5800-E1U CALIBRATION CERTIFICATION



10023681 ZEC-RDT-MS5800-R1U-ASFAL ASFAL MS5800-R1U CALIBRATION CERTIFICATION



10023684 ZEC-RDT-MS5800-ER1U-ASFAL ASFAL MS5800-ER1U CALIBRATION CERTIFICATION

Ordering Information > MS 5800 Calibration





10023687 ZEC-RDT-TC7700-CAL TC7700 CALIBRATION CERTIFICATION

10023688 ZEC-RDT-TC7700R-CAL TC7700R CALIBRATION CERTIFICATION

10023700 ZEC-RDT-TC7700-ASFAL ASFAL TC7700 CALIBRATION CERTIFICATION

10023701 ZEC-RDT-TC7700R-ASFAL ASFAL TC7700R CALIBRATION CERTIFICATION

Ordering Information > MS 5800 Calibration

Ordering Information > TC 7700 Calibration

SERVICES > WARRANTY & QUALITY INFORMATION

Services > Warranty & Quality Information > 77

Quality Information

Maintaining a high level of quality for our products and services is of utmost importance to Zetec. Our quality system is designed to ensure that we consistently provide you with the highest quality products and services. Zetec’s quality system has been ISO 9001 compliant since 1994. We currently maintain an ISO 9001 registration covering our hardware and software products in addition to our inspection services. We also maintain an ISO/IEC 17025 accreditation for nondestructive testing services and our Quality System meets the 10CFR50 Appendix B quality assurance criteria for the nuclear power industry.

Product Warranties

All Zetec products, including consumables, are delivered with Zetec’s promise to provide goods that are manufactured to be suitable for their intended purpose, functional and free from defects as per the agreed conditions of sale.

Major electronic and mechanical equipment is warranted to the original purchaser against defects in material and workmanship for a period of one year from the date of shipment.

Probes, cables and spare parts are considered consumables and are therefore warranted to the original purchaser at delivery to be free of defects in material, workmanship and to meet the specifi c design requirements and pass the specifi c quality checks at time of manufacture.

Customer paid equipment repair will be warranted for 90 days (parts and labor). This warranty is limited to failures in the areas related to the subject repair. The customer is responsible and will be charged for the recalibration of equipment where the calibration has been voided by the repair activity.

O.E.M. equipment not manufactured by Zetec will be covered by the original manufacturer’s warranty.

Zetec does not warrant against defects caused by damage, misuse, abnormal operating conditions, alterations or conditions of nature such as fi re, fl ood, wind and lightning.

Any non-conforming item shall be subject to repair, replacement or refund at Zetec’s option if such conditions are identifi ed within 30 days of the initial shipment.

Equipment warranty does not include periodic calibration or normal maintenance as described in the Zetec operating manuals. All returned merchandise must be sent freight prepaid by buyer, properly boxed to prevent damage in transit and be accompanied by a Zetec issued Return Merchandise Authorization (RMA) number.

© Zetec inc., 2009

ZETEC INC.

875 Charest Ouest Blvd., suite 100Québec, QC G1N 2C9CANADA

Toll-free: 800-643-1771 (North America only)Phone: +1 418-266-3020Fax: +1 418-263-3742

[email protected]

For more information about our regional offi ces, sales representatives, and distributors, please go to www.zetec.com/contact.html or send a request to [email protected]

CONTACT INFORMATION

Documents

ULTRASOUND AND EDDY CURRENT ARRAY · 2013. 2. 21. · ULTRASOUND AND EDDY CURRENT ARRAY > Product Catalogue. With over 40 years of experience in supporting power plant inspections