ULMA General Catalogue [en]

GEN

ERA

L CA

TALO

GU

E

02

FGV

02

Cata

logu

e pr

inte

d on

PEF

C ce

rtifi

ed p

aper

From the beginning of your projectsGENERAL CATALOGUE

Ps. Otadui, 3 - P.O. Box 1320560 OATI, SpainT. +34 943 034 900F. +34 943 034 920

www.ulmaconstruction.com

2 3

IMPORTANT

Any safety provisions as directed by the appropriate governing agencies must be observed when using our products.

All rights reserved.

The pictures in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the purpose of safety, they should not be deemed as definitive.

Neither all nor part of this document may be reproduced or transmitted in any way by any electronic or mechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval system without the written permission.

Copyright by ULMA C y E, S. Coop.

All of the indications regarding safety and operations contained in this document, and the data on stress and loads should be respected. ULMA Construccins Technical Department must be consulted anytime that field changes alter our equipment installation drawings.

The loads featured in this document, related to the basic elements of the product, are approximate.

Our equipment is designed to work with accessories and elements made by our company only. Combining such equipment with other systems is not only dangerous but also voids any or all our warrantees.

The company reserves the right to introduce any modifications deemed necessary for the technical development of the product.

4 5

LETS DRAW YOUR SUCCESS TOGETHER

FROM THE VERY FIRST LINE OF A SKETCH, TO A COMPLETED PROJECT. THERE IS A COMPANY LOOKING AFTER ALL THE DETAILS.

6 76 7

01 02 03

Poaniec Power Plant, Poaniec, Poland

Renovation of the Vizcaya Bridge, Bilbao, Spain

EP Certified Steel Prop

Beams and Plywood

BRIO Modular Scaffolding

ATR Self-Climbing Systems

CC-4 Aluminium Slab Formwork

ENKOFORM HMK Slab Formwork for Civil Engineering Projects

Kallpa Thermal Power Plant, Chilca - Lima, Peru

Blanka Tunnel, Prague, Czech Republic

Restoration of the Palace of Communications, Madrid, Spain

T-500 High Load Capacity Shoring

KSP Platform for The Support of Formwork in Shafts

High Load Capacity Truss Systems

Jirau Hydroelectric Power Plant, Porto Velho, Rondonia, Brazil

Bypass Tunnel EN - 101 Ponte da Barca - Arcos de Valdevez, Portugal

Restoration of the Palace of Versailles, France

SP Steel Prop

Wall and Faade Retention

BMK Climbing Bracket with MK System

CVS Cantilever Form Carrier

Konin Power Plant, Poland

T-60 Robust Shoring

Perimeter Working Platforms Diagonal Zero Zero Tower, Barcelona, Spain

Anchoring System for Climbing Systems Coast at Lakeshore East Building, Chicago, USA

Processing Plant for The Classification of Rocks, Retzstadt, Germany Villamuriel de Cerrato Tunnel, Valladolid, Spain

Maintenance of Offshore Platforms, Gran Canaria, Spain

ALUPROP Aluminium Prop

EVERMAX Composite Board

DORPA Frame Scaffolding

HWS Hydraulic Windshield System

VR TABLE Pre - assembled Slab Formwork

MK FORM CARRIERS

Taishan Nuclear Plant, Guandong, China

Wiggins Island Coal Export Terminal, Gladstone, Australia

Restoration of Villa Louis, Monaco

MK SHORING SYSTEMS Multipurpose Shoring System

BF-170 Folding Climbing Bracket

High Load Bearing Brackets

Bayovar Project, Piura Region, Peru Rome Metro Line C, Italy

Terniums Pesquera Plant, Monterrey, Mexico

CR-250 Conventional Climbing Bracket

CA-55 Launching Truss

Penjuru Road, Singapore

BRIO SHORING SYSTEM

G SHORING TOWER

Single-Sided Climbing Systems Upsite Tower, Brussels, Belgium

Four Seasons Building, Toronto / Ontario, Canada

COMPANY PRODUCTS PROJECTS

ULMA and the future ORMA Panel Formwork 28

86

90

ENKOFLEX Timber Beam Formwork 94

RAPID Recoverable Slab Formwork 96

RECUB Recoverable Waffle Formwork 98

BTM Metal Beam Formwork 100

102

106

112

Multi - purpose Palace of Gran Canaria, Las Palmas de Gran Canaria, Spain 162

210 Cut - and - Cover Tunnel, Extension of Railway Line, Terrassa, Spain 264

212 266

268

270

272

274

Lican Hydroelectric Plant, Commune of Rio Bueno, Chile 283

La Higuera Hydropower Plant, San Fernando, Chile 284

Main Sewage Pumping Station, Jebel Ali, Dubai, UAE 285

286

288

290

292

294

295

296

Baixo Sabor Dam, Bragana, Portugal 276

Changuinola I Hydroelectric Project, Panama 278

Hydroelectric Plant, Ingula, South Africa 280

Shipyard and Naval Base, Itaguai - RJ, Brazil 282

214

216

218

220

222

223

Gabaundi Viaduct, Mondragon, Spain 224

Bridge Over the Las Llamas River Bed, Santander, Spain 226

Bypass Road in Las Palmas de Gran Canaria, Spain 228

Narcea Viaduct, Asturias, Spain 230

Expressway S - 69 Bielsko Biaa - ywiec - Zwardo, Poland 232

Maria Skodowska - Curie Bridge, Warsaw, Poland 234

Intersection of A1 and A2 Motorways, Strykow, Poland 236

Motorway A4, Overpass E118, Tarnw - Dbica, Poland 238

Bridge on Motorway S3, Midzyrzecz, Poland 240

Bridge Over the Rudavoi River, Belluno, Italy 242

Plati Viaduct, Calabria, Italy 244

Pylon on Bucharest Ring Road, Romania 246

Bridge Over the Grand River, Ontario, Canada 248

Bypass Road and Motorway Port Of El Salvador, Brazil 250

Mario Covas Ring Road, Sao Paulo - SP, Brazil 252

El Salto Viaduct, Santiago, Chile 254

Electric Train, Lima, Peru 256

Tingo Bridge, Northern Interoceanic Highway, Peru 258

Salinas Bridge, Amazonas, Peru 260

Bridge Over the Napo River, Orellana, Ecuador 262

European Solidarity Center, Gdask, Poland 164

Lookout Tower of the Trade Fair and Congress Center, Kielce, Poland 166

ECE Thier Areal, Dortmund, Germany 168

Sport City, Rome, Italy 170

172MaRs Centre, Toronto, Canada

174Tower Bridge Shopping Centre, Sao Paulo, Brazil

176National Stadium, Brasilia, Brazil

178Renovation of Governor Magalhes Pinto Stadium, Belo Horizonte-MG, Brazil

180National Confederation of Commerce and Tourism, Brasilia, Brazil

182360 Building, Sao Paulo, Brazil

184Altezza Business Center, Mexico City, Mexico

186Renovation of the National Stadium, Lima, Peru

188University of the Pacific, Lima, Peru

190Princess Noura University, Riyadh, Saudi Arabia

192

Prestige Trade Tower, Bangalore, India

196

Control tower at Dakar International Airport, Senegal

194

Lucca Hospital, Italy

197Materik Shopping Centre, Kiev, Ukraine

198Posadas Hospital, Morn, Argentina

199Cardinal Tower, Cordoba, Argentina

200uoa Clinic, Santiago, Chile

201Palace of Youth , Astana, Kazakhstan

202

204

206

208

116

114

120

68

74

78

80

81

82

83

84

85

MEGAFORM Panel Formwork in Imperial Sizes 36

NEVI Medium Duty Panel Formwork 40

MEGALITE Medium Duty Panel Formwork in Imperial Sizes 44

COMAIN Lighweight Panel Formwork 48

ENKOFORM V-100 Timber Beam Wall Formwork 50

BIRA Circular Steel Formwork 54

FLECTOR Timber Beam Circular Formwork 56

LGR Light Column Formwork 58

F-4 MAX Articulated Column Formwork 60

CLR Circular Column Formwork 62

Single-Sided Formwork System 64

Common Accessories 66

10

12

13

14

15

16

18

19

20

20

21

22

How we are

ULMA Construccin Worldwide

About ULMA

ULMA Group

CSR

ULMA Service

Manufacture

Staff training

Safety Reliability

From the beginningof your projects

Project management

Vertical Formworks

Climbing Systems

Horizontal Formworks

Civil Engineering Systems

Props and Shoring Systems

122

124

128

130

134

138

142

144

146

148

150

156

158

Timber Beams and Plywood

Scaffolding

Building Construction

Highrise Buildings

Industrial and Energy Constructions

Bridges

Tunnels

Hydraulic Construction and Sewage Treatment Plants

Restoration and Maintenance

ULMA Construccin Worldwide

98

ULMA AND THE FUTURE

ABOUT ULMA

ULMA SERVICE

FROM THE BEGINNING OF YOUR PROJECTS

COMPANY01

10 11

ULMAAND THE FUTURE

Great construction projects reflect the change and development of our societies. They show the desire of the human being to improve and excel. By challenging the future and making impossible dreams into reality. Building higher and higher, planning traffic routes and roads to link communities, increasing power generation These and many others are the demanding tasks that we - the construction industry takes on to tackle the one great challenge: to build a better future.

Striving for success is demanding. Many factors come into play in such complex and magnificent projects requiring a leader to coordinate and offer an excellent solution for the mode of operation and deadlines. Only then, the project will be a success. ULMAs top priority is the joint success with our customers. This is best done by always offering an optimal solution in both systems development and application; because our sole purpose is to obtain the most cost-effective, efficient, reliable and safe result. The Best.

//

131312

ABOUT ULMA HOW WE ARE

We offer complete formwork, climbing, shoring and scaffolding solutions - for sale and rental - in residential and non-residential construction, civil engineering and restoration.

A unique range of top products perfectly adaptable to any terrain, environment and type of construction is well prepared to give solutions to any construction project.

All of this, with a dedication to complete service: technical advice and on-site supervision. We examine and address the specific problems in each case to solve them under strict criteria of reliability, quality, safety and efficiency.

We are committed to continuous improvement; an added value that ensures the success of each project, and is based on the knowledge and mastery of design and application technology.

We place all our potential and commitment - technical and human at the disposal of our customers.

We respond to complex problems with simple solutions.

We develop the projects together with our customers to meet their needs and make it a real joint project.

We offer a personalised and continuous service, from project conception to final delivery.

We rely on the quality of our products, with workers safety being a top priority.

More than 50 years in business have enabled us to accumulate knowledge and experience. Operating on a base of know-how that allows us to offer our customers the best service. We deliver high added value to each project with effective cutting-edge solutions.

With a self-management model, ULMA opts for internationalisation. More than 25 branches strategically spread around the world and 2,000 employees confirm our effort and ability to adapt to all markets.

From the idea to the solution. Throughout the entire process, we accompany the customer in the management and solution of his requirements. Identity:

Personality and involvement:

To be 100% committed to society and the environment is part of our DNA. We act according to sustainability criteria and assume as our own the principles of Corporate Social Responsibility. 10% of our profits are spent on social work and public welfare purposes.

Right from the beginning, we pursue the best solution. And this is what sets us apart. We break down problems that seem unsolvable, and get the best result.

We care about our employees as the main asset for economic success. This is the only way to prepare ourselves for the new challenges awaiting us.

They are part of the team, setting the pace and way to follow. Thanks to them, we are as we are. The mutual understanding between ULMA and the customer is a cornerstone throughout the process that marks the success of each project.

ULMA is part of the ULMA Group, and a member of the MONDRAGON Corporation. We are in business since 1961, which endorses our experience and quality of services.

Our philosophy is based on one important premise: the involvement of our staff. Beyond mere declarations of intent, customer proximity is a central feature of our corporate policy. Be it with suppliers or with our customers, we all are a team.

Simple solutions to complex projects:

Human capital: Our customers:

Close to our environment:

WE ARE ONE OF THE BEST. WE ARE WORLD LEADER IN THE DESIGN AND MANUFACTURE OF FORMWORK AND SCAFFOLDING SYSTEMS.

THE TRAITS THAT DESCRIBE AND DISTINGUISH US, MAKE US UNIQUE.

ULMA DRIVES A CONTINUOUS R&D&I PROGRAMME THAT ENABLES US TO DELIVER TOP-QUALITY PRODUCTS AND SERVICES.

Company

// //

14 15

We are supported by more than 50 years of market presence and by a clear commitment to Innovation, Employment and Added Value. ULMA is a conglomerate of eight companies engaged in different businesses.

In constant expansion and growth, our philosophy is based on human and social values. About 4,300 employees work in the Group, with total sales exceeding 700 million Euro.

We are present in different countries in Europe, America, Africa, Asia and Oceania. Wherever we are, our products and services are always tailored to the requirements of each country and market.

ULMA IS ONE OF THE LARGEST BUSINESS GROUPS IN NORTHERN SPAIN.

PRESENT:

of all continents

INTERNATIONALISATION IS ONE OF OUR AXES, WE ARE ONE OF THE LARGEST COMPANIES OF THE SECTOR WORLDWIDE.

80

Turnover700

Countries

work in the ULMA Group

4300Employees

ULMA GROUP ULMA CONSTRUCCIN WORLDWIDE

Benefiting

entities

125

Million Euros

+ than

Business

units 8

Spain Argentina

Saudi Arabia

AlgeriaTunisiaMorocco

Australia

Poland USA KazakhstanSingapore

Romania

France Canada UAE

Czech Republic Peru

Russia

Germany BrazilPeoples Republic of China

Portugal Mexico

Lithuania

Italy Chile India

Slovak Republic

UkraineHollandTurkey

Asia AfricaEurope America

Oceania

Company

//

16 17

It is calling - part of our identity, our principles and our culture. Since 1961, we actively work with social organisations. This makes ULMA a business group 100% dedicated to social work and solidarity.

WE UNDERSTAND SOLIDARITY AS AN INTEREST IN THE NEEDS OF OTHERS.

We accompany people and groups to full development. we provide the means, and above all, we invest in the training of the most disadvantaged in our society, so as to give them a future.

CORPORATE SOCIAL RESPONSIBILITY

We develop a sustainable manufacturing process with minimum consumption of raw materials and energy. In our fight against environmental impact, we rely on inert waste and ban the generation of waste that is hazardous and contributes to air pollution.

All our processes follow minimal impact criteria for noise pollution, pollution originating from transport, land occupation, dust generation etc.

Design and manufacture of products with clean technologies (ISO 14001 certified environmental management system).

Products, whose use prevent negative impacts.

Reusable, durable products which require minimal maintenance.

Largely recyclable products.

ENVIRONMENTAL MANAGEMENT

The system is based on the risk and environmental management in manufacturing and design processes:

Along with various foundations and NGOs, we contribute to the development of our towns and communities. Moreover, we promote university scholarship schemes and give support to disabled children.

Social work and solidarity:

We work together with several local, cultural, educational and developmental institutions with the aim of contributing to the transformation and development of societies.

Education and Culture:

In ULMA, we acquire the necessary knowledge and skills to respond to strategic challenges. With programs that enhance the effectiveness and efficiency of our workers in skills development. We design professional trainings tailored to the needs of our staff. The ongoing acquisition of new knowledge makes up our human capital.

Staff training:

We focus on a proactive management of health and safety in the area of business and in aspects related to the prevention of occupational risks.

Health:

Our priority is to minimise the environmental impact of our products throughout their life cycle.

Company

//

//

18 19

Only then, it is possible to more quickly offer a solution to each construction, and maintain at all times and in each section the established standards of flexibility, safety, reliability and quality.

For the application of our products in construction projects, be it on rental or sales basis, our best project engineers carry out the necessary studies and analyse along with the customer the optimal implementation.

Our technology surprises through its dedication: to bring maximum innovation to customers. Be it for formwork, shoring, scaffolding, or any other specialised application, we are the experts in product design and construction processes.

Guided by the requirements of the customer, we chose in each case the most efficient execution of works by optimising the necessary material. We ease erection, maintenance and handling and reduce risks. The versatility of our products aims to offer the customer maximum safety, efficiency and cost-effectiveness for his construction project.

The effectiveness of our system is based on management and inspection techniques applied to the manufacture, which ensures maximum and ongoing product and service quality.

ULMA designs, produces and merchandises industrial formwork and scaffolding systems for the construction industry. We have one of the largest manufacturing plants in Europe with fully automated and robotised processes.

Process control, together with the measurement and monitoring of each production stage makes traceability an example of safety and total quality. Our highly qualified production team works every day to provide our customers with the best product.

We also offer additional assurance to our customers by obtaining certification of our products from authorised external institutions. An endorsement that shows our constant concern for excellence and puts us at the forefront of new trends in business management. The result of this effort is the certificate of ISO 9001 Registered Company since 1994, among others.

WE SEEK PERFECTION IN THE PERFORMANCE AND EFFICIENCY OF OUR SYSTEMS. WITH CUTTING-EDGE TECHNOLOGY AND OPTIMAL ENGINEERING SOLUTIONS.

ULMA SERVICE

LATEST-GENERATION ENGINEERING

Thanks to the experience gained all along the years and thanks to the co-operation with customers and third parties, ULMA is today a company specialised in a wide range of products.

EXCELLENCE IS OUR MAXIM.

MANUFACTURE

Company

//

//

20 21

ULMAs philosophy departs from the idea of team work, because it is the promotion of staff coaching that encourages the personal and professional development of workers.

This is how we contribute to the progress of the enterprise and improve internal knowledge management. We devote significant resources to the training of different areas of the company, which translates into a high specialisation of our teams.

This occurs inside but also outside of ULMA for the benefit of other companies and groups, because the knowledge acquired in the application of our own particular technologies in projects is passed on to others in courses and seminars hold by ULMA.

Safety is one of ULMAs main foundations. Construction work is inherently dangerous and, as part of our commitment, we design systems which ensure workers safety in the handling of our products and their erection on the building site.

Our every day ambition is to ensure full personal and collective protection of the worker and third parties. The extensive use of safety measures both at the planning stage and during work is given as advice to all customers.

All our systems are equipped with safety features for both assembly and use on the building site. We study, design and develop all formwork, scaffolding and shoring systems as well as any other products of our range with respect to two fundamental criteria:

Costs and performance.

Highest safety standards.

STAFF TRAINING

SAFETY RELIABILITY

SAFETY IN CONSTRUCTION WORK ENSURES THE HEALTH AND PHYSICAL INTEGRITY OF ALL.

FROM THE BEGINNING OF YOUR PROJECTS

This is how we are in ULMA. Professionals and people. A group of companies that wants to participate, in front line, in the transformation the world is experiencing today.

We want to contribute to this change by offering solutions and knowledge with our products and by providing state-of-the-art technology. And we want to do it in a manner which is sustainable and respectful.

With the environment and with the people. Because only if we join a vision of the future to responsibility, we will succeed.

Company

//

22 2322 23

PROJECT MANAGEMENT

We get involved right from the beginning. We sit down with you and seek the best solution for your project. The goal is clear: to offer, at the lowest cost, the maximum product performance for your project. In short, optimise your results.

We have the most qualified team and the best software for engineering solutions to the most complex projects. On the basis of a specific and profound technical study, we obtain the best combination of suitable products to optimise performance and efficiency.

Our technical department studies the specific requirements of the project, materials and their rotation, according to the time of each construction stage. We design an optimal solution and limit your costs to a minimum.

ULMAs Technical Department is capable of offering a solution to any issues regarding the project, be it for vertical or horizontal structures. In short, by simply entering the desired geometry of the structure, we get the best solution for each case.

The technical team gets the best planning, saving time and labour. The studies give the team of engineers an accurate view of the entire project.

Together with the customer, we analyse and define the most appropriate material supply sequence and on-site assistance for optimal project execution at all stages.

Grafsystem, a software developed by ULMA, offers all possible solutions for projects in the application of all products of our range. Fast and easy to use, this system produces assembly drawings, calculates an optimised budget and determines the required material for each stage.

Even the most complex projects have a simple start, the moment when the ideas come up in your mind. In ULMA, we work with our customers right from the start, so the project solution is jointly managed and evolved during its implementation.

It is the idea expressed by those pencil strokes that we draw on a piece of paper, which outlines the solution, that solution that simplifies all problems.

WE LISTEN TO YOU THE PROJECT

SIMPLE SOLUTIONS TO COMPLEX PROJECTS

To make your idea into realityIn-depth study of the project

Because thorough planning saves money

The beginning, with pencil and paper

01 03

02

Company

//

24 25

In addition to defining and developing the project with the customer, we give on-site advice and assistance. We organise the layout and assembly of all products to ensure the reliability and effectiveness with which they have been designed. We also provide the necessary documentation for application and assembly of all products. Involvement is our great added value.

It is a key element of our service. In each project, the proximity of ULMA professional staff ensures the application of all the know-how generated by our teams. From technical advice over assembly supervision to the job completion, the monitoring of works is absolute.

ULMA products work well at all times. Because, in addition to being strong and durable, all rental materials undergo continuous servicing and repair in our maintenance centres. This way, we offer to all our customers best material performance.

ON-SITE ASSISTANCE

We are right there, on-siteAlways ready

04 06

We have big strategic centres all over the world. One of them is the Toledo Logistics Centre (220,000 m2) in Spain, starting point for all major deliveries. Equipped with large operation facilities, its advanced means and IT system ensure best management and control of the service given to each job.

The products are arranged as palletised modules and in boxes. This eases storage, loading, transport and shipping. This task is carried out by the big logistic centres or from the local warehouses of the country where ULMA is present. From the latter, we supply all immediate material requirements of the projects of our customers, be it for rental or sales.

The analysis and evaluation of the entire process enables us to grow and apply the learnt in future projects. We always want to provide service at its best.

So we seek continuous improvement of our equipment and processes. We are totally committed to provide you with the best solution for your project from the beginning on.

By having a great goal: the design of solutions in response to the new demands of our customers and of society in general, worldwide.

LOGISTICS CONTINUOUS IMPROVEMENT

CLEANING AND MAINTENANCE

Timely equipment supply of components is essential for project success

Learning and applying

05 07

We are demanding in our work. Supply of pre-assembled equipment according to agreed deadlines backed by our high logistics capabilities, and ad-hoc services for any unforeseen circunstances makes us a powerful service provider to our customers.

Taken together infrastructure, professional staff, logistics and stocks - material delivery in the shortest possible time is ensured.

PROJECT MANAGEMENT

Company

2726

PRODUCTS02

VERTICAL FORMWORKS

CLIMBING SYSTEMS

HORIZONTAL FORMWORKS

CIVIL ENGINEERING SYSTEMS

PROPS AND SHORING SYSTEMS

TIMBER BEAMS AND PLYWOOD

SCAFFOLDING

292828

HIGHLY EFFICIENT HEAVY-DUTY ALL-ROUNDER

ORMA on climbing systems

Steel frame reinforced

Panel fast connection

Excellent finishing

ORMA Clamp.

Excellent concrete finishing

Panel Formwork

Perfect for the construction of all kinds of vertical concrete structures, both in building construction and civil works (walls, columns, abutments, footings). With effective and safe accessories in any type of application.

Highly efficient with minimum labour costs and erection time.

Consisting of panels that are joined with clamps to make sets.

Very versatile: lateral holes for fast erection of standard solutions (bulkheads, corners, columns, etc.). Minimum work on infillings and compensations.

Excellent finishing due to high-quality phenolic birch plywood.Robust panel with steel frame and reinforced corners.

Connection of wall panel to universal panel

Panel connection with clamps and a single hammer blow.

Connecting element between panels and corners.

Three basic functions:JoinAlignStiffen

FEATURES

Designed to withstand high concrete pressures (certified by GSV*).

- 3.3 m range: 80 kN/m2

- 2.7 m range: 74 kN/m2

Maximum deflection:

- For 60 kN/m2: line 7, tab. 3 DIN 18202

- For 80 kN/m2: line 6, tab. 3 DIN 18202

For pouring heights 3.3 m, 2 rows of anchors in height are required.

For pouring heights > 3.3 m, 3 rows of anchors in height are required.

Permissible concrete pressure:

BENEFITS

BENEFITS

Versatility with lateral holes

Connection between panels and corners

ORMA

Profile of adjustable clamp

Products Vertical Formworks

30 31

APPLICATIONS AND SOLUTIONSBENEFITS

1 Climbing systems

5 Corners at 90

3 Columns

2 Single-sided formwork support

6 Corners not 90

7 Bulkheads

8 90 wall intersections

9 Fillers

10 ORMA-BRIO working bracket

11 Working bracket

12 ORMA platform

13 Front handrail

4 Pilaster

1

13

7

6

4

6

12

5

11

5

2

3

13

8

9

Panels are compatible and can be placed vertically or horizontally.

Wide height range of panels: 3.3 m; 2.7 m, 1.2 m and up to 3.3 x 2.4 m (7.92 m2).

It is possible to assemble sets every 15 cm lengthwise and every 30 cm vertically.

2400

27002400

2700

Safety items for easy application to panels. Guaranteed safety.

Walkway brackets and push-pull props

10

7


32 3332 33

Stripping corner panel for inside of shafts

Stripping corner panel in stripping position

APPLICATIONS AND SOLUTIONS

Columns

Wide range of column panels for columns of 30 x 30 cm up to 120 x 120 cm (adjustment interval every 5 cm).

Panel heights: 2.7 m; 1.2 m; 0.6 m.

Widths of Column panel: 0.72 m; 0.92 m and 1.32 m.

Up to 80 kN/m2 permissible concrete pressure.

Panel connection with Universal Panel Bolt and Plate Washer Nut 15 through holes in panels every 5 cm.

Universal panels

With outside corner panel

With panel at edge Inner part with inside corner panel

Construction of columns with ORMA formwork ORMA column panels joint in height with clamp

90 corner solutionCompensation between panels

Adjustment of clamp enables compensations of up to 10 cm


34 3534 35

BASIC COMPONENTS

Column panel 2.7x1.32 (3.56m2) 1900341 213

Column panel 2.7x0.92 (2.48m2) 1900509 159

Column panel 2.7x0.72 (1.94m2) 1900354 134

Column panel 1.2x1.32 (1.58m2) 1900344 100

Column panel 1.2x0.92 (1.1m2) 1900515 74

Column panel 1.2x0.72 (0.86m2) 1900357 62

Column panel 0.6x1.32 (0.79m2) 1900347 58

Column panel 0.6x0.92 (0.55m2) 1900518 43.3

Column panel 0.6x0.72 (0.43m2) 1900360 35

ORMA inside corner 3.3 (1.98m2) 1908271 123


ORMA inside corner 1.2 (0.72m2) 1900156 48.7


ORMA outside corner 3.3 1908273 60

ORMA outside corner 2.7 1900932 51

ORMA outside corner 1.2 1900936 22.9

ORMA hinged inside corner 3.3 1908346 145



ORMA hinged outside corner 3.3 1908357 93

ORMA hinged outside corner 2.7 1900110 77

ORMA hinged outside corner 1.2 1900194 34.8

ORMA stripping corner 3.3 1908770 194

ORMA stripping corner 2.7 1908771 162

ORMA stripping corner 1.2 1908772 79.6

ORMA clamp 1900170 5.5

ORMA fixed clamp 1900894 2.9

ORMA lifting hook 1900179 10.6

Panel 3.3x2.4 (7.92m2) 1908247 451

Panel 3.3x1.2 (3.96m2) 1908250 208

Panel 3.3x0.9 (2.97m2) 1908253 167

Panel 3.3x0.75 (2.475m2) 1908256 149

Panel 3.3x0.6 (1.98m2) 1908259 130

Panel 3.3x0.45 (1.485m2) 1908262 107

Panel 3.3x0.3 (0.99m2) 1908265 88

Panel 2.7x2.4 (6.48m2) 1900002 363

Panel 2.7x1.2 (3.24m2) 1900005 167

Panel 2.7x0.9 (2.43m2) 1900008 134

Panel 2.7x0.75 (2.03m2) 1900487 120

Panel 2.7x0.6 (1.62m2) 1900011 105

Panel 2.7x0.45 (1.21m2) 1900020 86

Panel 2.7x0.3 (0.81m2) 1900029 69

Panel 1.2x2.4 (2.88m2) 1908680 188

Panel 1.2x1.2 (1.44m2) 1900032 89

Panel 1.2x0.9 (1.08m2) 1900035 70

Panel 1.2x0.75 (0.9m2) 1900490 62

Panel 1.2x0.6 (0.72m2) 1900038 54

Panel 1.2x0.45 (0.54m2) 1900047 42

Panel 1.2x0.3 (0.36m2) 1900056 35

Panel 0.6x0.9 (0.54m2) 1908695 41

Panel 0.6x0.45 (0.27m2) 1908691 24

Panel 0.6x0.3 (0.18m2) 1908687 19

Universal panel 3.3x0.92 1908268 184



kg kg kg

ORMA-BRIO walkway bracket

Bulkhead

With walers With universal panel

Safe working platforms


Connection at upper profileIntermediate connection between panel profiles

2

1

1 2


373736

EFFECTIVE, EFFICIENT, ROBUST

Construction of very high walls with MEGAFORM MEGAFORM formwork in single-sided walls

Panel Formwork in Imperial Sizes

Modular wall and column formwork in imperial measurements. Perfect for the construction of walls and columns in building construction or civil engineering. APPLICATIONS AND SOLUTIONS

BENEFITS

Erection of large MEGAFORM gangs. Lifting of these gangs with Mega Lifting Hook.

Panels with lateral holes that can be combined with universal panels and can thus offer solutions for all kinds of geometries.

High-quality phenolic plywood: excellent concrete finishing.

Holes in ribs to tie accessories to.

Integrated safety handles for works at height.

Indent for panel positioning and stripping.Anchor types taper tie or she-bolt, without requiring plastic tube for their recovery.

Connections between panels with adjustable clamp. One hammer blow is enough. Fillers between panels of up to 10 cm are possible.

FEATURES / COMPONENTS

Designed in imperial measurements.

Panels can be combined, heights: h=10, h=8, h=4 and h=2

Universal panel: widths of 55 and 31

Large panel 10 x 8 with 4 rows of anchors in height:- hpouring 10, with 2 rows of anchors- hpouring > 10, with 4 rows of anchors

Panel 8 x 8 with 2 rows of anchors in height

Universal panels, maximum column section: 48 x 48

MEGAFORM range of panels

Permissible concrete pressure:- Panels: 1650 psf- Universal panel, concrete pressure: 1850 psf

1 Assembly of large gangs

5 Corners not 90

3 Working platforms

2 Lifting

6 Wall intersections

7 Bulkhead

8 Pilasters

9 Columns

10 Fillers

4 Corners at 90

MEGAFORM

1

2

5

4

6

10

3

9 8

7


393938

BASIC COMPONENTSAPPLICATIONS AND SOLUTIONS

Inside corner 10 1904626 278



Inside corner 2 1904212 63.1

Inside hinged corner 10 1904632 315



Inside hinged corner 2 1904313 70.5

Outside hinged corner 10 1904639 194

Outside hinged corner 8 1904165 146

Outside hinged corner 4 1904166 81.6

Outside hinged corner 2 1904314 44.1

Universal corner 10 1904649 159

Universal corner 8 1904240 121

Universal corner 4 1904241 67.7

Universal corner 2 1904242 38.4

Universal hinged corner 10 1904653 390







Taper tie 1 (41) 1904416 8.8

Taper tie 1.3 (50) 1904417 11.5

Taper tie 1.5 (59) 1904418 13.9

She-bolt tie 0.35 (14 1/4) 1904420 4.6

She-bolt tie 0.5 (20) 1904419 5.7

MEGAFORM univ. panel 10x55 1904606 591







MEGAFORM univ. panel 2x31 1904049 89.3

Universal corner clamp 1904230 6.6

ORMA lifting hook 1900179 23.4

Mega lifting hook 1904220 81.6

MEGAFORM panel 10x8 1904600 946




MEGAFORM panel 10x1.5 1904605 297






MEGAFORM panel 8x1.5 1904005 183





MEGAFORM panel 4x1.5 1904045 100.3

MEGAFORM panel 4x1 1904041 83.8



MEGAFORM panel 2x1.5 1904225 72.3


ORMA clamp 1900170 12.1

lb lb lb

Inside of shafts

Other solutions

Polygonal walls

Climbing solution

Foundations

Inclined walls

Tight solutions

Overhanging wall

Hinged universal corner solution for pilasters

Single-sided walls

Pouring of concrete wall, climbing formwork Construction of columns and walls with MEGAFORM

Inside of shafts

Double-sided 16 wall formwork

Retractable corner panel in formwork erection/stripping of inside of shafts


414140

PERFECT COMBINATION: STRONG, VERSATILE AND HANDLED WITHOUT CRANE

NEVI panel with EVERMAX composite board in double-sided walls

Panel perpendicular connection with panel bolt

Manual erection and dismantling

Medium Duty Panel Formwork

Light panels: enable manual formwork erection and dismantling.

Robust panel with steel frame and reinforced corners.

Very versatile: lateral holes for fast shuttering of standard solutions (bulkheads, corners, columns, etc.) Use of universal panel.

Excellent finishing due to high-quality plywood: phenolic birch or EVERMAX composite plywood.

Innovative range of panels and accessories for the shuttering of all kinds of wall and column geometries in building construction.

Light and high-quality materials: manual erection or with crane. Guaranteed efficiency.

Easy-to-use and strong. High-quality materials for an optimal balance between weight and strength. Quick lock clamp for the jointing of panels and assembly of formwork sets.

BENEFITS


Quick jointing of panels with clamps.

Adjustment of clamp enables fillers of up to 12 cm between panels.

Tying of panel profiles with adjustable clamp.

Accessories shared with other ULMA wall and column formwork systems.

Safety items for easy application to panels. Guaranteed safety.

FEATURES

Designed to withstand high concrete pressure:

- Maximum pressure: For heights above 2.7 m: 60 kN/m2.

- With 2.7 m panel: for wall heights below 2.7 m, hydrostatic pressure of 67.5 kN/m2 (does not require speed control during concrete pouring).

- With 3 m panel: for wall heights below 3 m, hydrostatic pressure of 75 kN/m2 with two rows of anchors.

- Maximum deflection: For 60 kN/m2: line 6, according to DIN 18202.

Width interval every 15 cm by combining different panels

The Universal panel gives solution to different column sizes:

- From 10 x10 cm to 65 x 65 cm; adjustment every 5 cm possible. Bigger column sections are solved with two universal panels.

- Panel heights: 2.7 m; 2.4 m; 1.2 m.

- Up to 60 kN/m2 permissible concrete pressure.

- Panels connection with bulkhead hook and plate washer nut 15. Lateral holes and multi-punched rib in panels every 5 cm.

Wide panel range:

- Four height ranges, fully compatible (3 m; 2.7 m; 2.4 m and 1.2 m), in vertical or horizontal.- Width range: 0.9 m; 0.6 m; 0.45 m; 0.3 m.

1 Climbing systems

5 Corners at 90

3 Columns


6 Corners not 90

7 Bulkheads

8 90 wall intersections

9 Fillers

10 Walkway bracket

11 Front handrail

4 Pilaster

Lifting of sets Universal panel in pilaster Includable safety components

BENEFITS

1

4

6

7

8

9

5

10

11 2

3

NEVI


42 43


NEVI inside corner 3 (1,8m2) 1920750 70

NEVI inside corner 2.7 (1,62m2) 1920881 57



NEVI outside corner 2.7 1920930 29.3

NEVI outside corner 2.4 1920932 26

NEVI outside corner 1.2 1920935 13.1

NEVI hinged corner 2.7 1920943 41.4

NEVI hinged corner 2.4 1920947 37

NEVI hinged corner 1.2 1920951 19.2

NEVI clamp 1920851 4

MEGALITE clamp 1920818 1

NEVI lifting hook 1920835 8

NEVI panel 3x0,9(2.7m2) 1920725 95

NEVI panel 3x0,3(0.9m2) 1920735 48

NEVI panel 2.7x0.9(2.43m2) 1920645 86

NEVI panel 2.7x0.6(1.62m2) 1920651 64

NEVI panel 2.7x0.45(1.215m2) 1920654 55

NEVI panel 2.7x0.3(0.81m2) 1920657 42.9

NEVI panel 2.4x0.9(2.16m2) 1920646 77

NEVI panel 2.4x0.6(1.44m2) 1920652 58

NEVI panel 2.4x0.45(1.08m2) 1920655 49.2

NEVI panel 2.4x0.3(0.72m2) 1920658 38.5

NEVI panel 1.2x0.9(1.08m2) 1920647 43.5

NEVI panel 1.2x0.6(0.72m2) 1920653 32.2

NEVI panel 1.2x0.45(0.54m2) 1920656 27.4

NEVI panel 1.2x0.3(0.36m2) 1920659 20.7

NEVI universal panel 3x0.75 1920730 96

NEVI universal panel 2.7x0.75 1920648 85

NEVI universal panel 2.4x0.75 1920649 81

NEVI universal panel 1.2x0.75 1920650 42.4

With inside corner panel

Construction of columns and walls

kgkg

90 corner solution Fillers with NEVI clamp

Short walls Foundations and footings

With outside corner panel

With universal panel


44 45

LIGHT, DURABLE, HANDLED WITHOUT CRANE

Lifting hook for gang lifting

Construction of walls in residential building

Medium Duty Panel Formwork in Imperial Sizes

Lifting hook for the assembly of gangs and formwork lifting.

Light panels for easy handling.

Quick and easy connection with MEGALITE Clamp.

Versatile. All kind of solutions combining in perpendicular connection wall panels with lateral holes and universal panel with multipunched ribs.

Light modular wall and column formwork in imperial measurements. Perfect for any vertical concrete structure in building construction (walls, columns, pilasters, wall intersections, foundations).

Manual erection or with crane.

Designed in imperial measurements.

BENEFITS

Long-lasting resistant steel frames with reinforced corners.

FEATURES

Permissible concrete pressure:

- Walls higher than 8: Uniform pressure of 1250 psf.

- Walls up to 8: Hydrostatic pressure (does not require speed control during concrete pouring).

Strong steel frames Columns with universal panel

- Panels of 36 width: Uniform pressure of 1000 psf.

2 rows of tie rods in height up to 8

Height range of panels: 8, 6 and 4

Columns with universal panel

- Column solution with panels of 6x6 to 36x36, adjustment interval every 2.

- Wider columns are possible by joining panels longitudinally.

- Concrete pressure: 1650 psf.

MEGALITE


46 47


ML inside corner 8x8 8 1920242 84.4



ML outside corner 8 1920082 48.7



ML hinged inside corner 8 1920130 121

ML hinged inside corner 6 1920146 90.6

ML hinged inside corner 4 1920158 60.6

ML hinged outside corner 8 1920128 80

ML hinged outside corner 6 1920140 60

ML hinged outside corner 4 1920152 40.1

ML universal hinged corner 8 1920098 143

ML universal hinged corner 6 1920100 105.4

ML universal hinged corner 4 1920110 81.6

MEGALITE clamp 1920818 2.2

NEVI clamp 1920851 8.8

NEVI lifting hook 1920835 17.6

ML panel 8x30 1920340 125

ML panel 6x30 1920350 97

ML panel 4x30 1920360 67.5

ML panel 8x24 1920455 108

ML panel 6x24 1920456 83.8

ML panel 4x24 1920457 57.8

ML panel 8x18 1920473 91.3

ML panel 6x18 1920458 70.5

ML panel 4x18 1920459 48.5

ML panel 8x12 1920474 72.8

ML panel 6x12 1920460 56

ML panel 4x12 1920461 37.9

ML panel 8x6 1920475 54

ML panel 6x6 1920462 41

ML panel 4x6 1920463 27.8

ML universal panel 8x30 1920480 146

ML universal panel 6x30 1920490 109.8

ML universal panel 4x30 1920500 80.2

lb lb

Pilaster with hinged universal corner panel

Fillers

Wall intersections

Corners with corner panels

Bulkhead

Filler with waler

Corners with universal panel

Filler with NEVI Clamp up to 4.72


494948

Lightweight Panel FormworkLIGHT AND SIMPLE ALL-ROUNDER

BENEFITS

Perfect for vertical structures in small or large areas: walls, foundations, beam sides, columns.

Wide range of panels (including universal and corner panels) to adapt to any geometry.

Bolt fastening.

Light formwork for walls and foundations. Can be handled by a single worker without requiring a crane.


Permissible concrete pressure: 40 kN/m2

Panels of 3 different heights: 2.4 m; 1.5 m; 1.2 m

kgBolt 1850134 0.29

COMAIN waler 3 1850433 18.2

COMAIN waler 1.6 1850159 9,8

COMAIN waler 0.75 1850162 4.8

Hook 1850164 0.45

Long hook 1850183 0.71

Plate nut 15 7238000 0.73

COMAIN lifting hook 1850322 4.6

kg

COMAIN Panel 2.4x0.6 (1.44 m2) 1850188 46.9

COMAIN Panel 2.4x0.45 (1.08 m2) 1850197 40.6

COMAIN Panel 2.4x0.3 (0.72 m2) 1850202 28.3

COMAIN Panel 2.4x0.2 (0.48 m2) 1850207 24.1

COMAIN Panel 1.5x0.9 (1.35 m2) 1850372 42.1

COMAIN Panel 1.5x0.6 (0.9 m2) 1850378 30

COMAIN Panel 1.5x0.45 (0.675 m2) 1850382 25.9

COMAIN Panel 1.5x0.3 (0.45 m2) 1850386 17.9

COMAIN Panel 1.2x0.9 (1.08 m2) 1850100 34.4

COMAIN Panel 1.2x0.6 (0.72 m2) 1850113 24.4

COMAIN Panel 1.2x0.45 (0.54 m2) 1850118 21

COMAIN Panel 1.2x0.3 (0.36 m2) 1850124 14.4

COMAIN Panel 1.2x0.2 (0.24 m2) 1850129 12.2

COMAIN inside corner 2.4m 1850220 61

COMAIN inside corner 1.5m 1850390 38.1

COMAIN inside corner 1.2m 1850145 31.2

COMAIN outside corner 2.4m 1850223 14.6




COMAIN int hinged corner 2.4m 1850212 47.4



COMAIN out hinged corner 2.4m 1850319 17.6

COMAIN out hinged corner 1.5m 1850411 11

COMAIN out hinged corner 1.2m 1850316 8.8

kg

BASIC COMPONENTS

Foundation formwork

Wall formwork

COMAIN lightweight panel formwork

Beam formwork

Column formwork

APPLICATIONS

Simple jointing of panels with bolt (consisting of bolt and captive wedge).

COMAIN


50 5150 51

FLEXIBLE, VERSATILE, COMPLETE

Connection between walers and timber beams Panel connector With Waler 90 With t connectorSafety components

Vertical structure with ENKOFORM VMK

Timber Beam Wall Formwork

Versatile and flexible for any geometry.

Optimised formwork with regard to defined concrete pressure.

Excellent concrete finishing. Easy arrangement to obtain the wall pattern defined by the architect.

Easily replaceable plywood in case of damage.

Great efficiency and excellent concrete finishing for any vertical structure in building construction and civil works: walls, piers, abutments, columns, etc.

Requires pre-assembly of panels (steel walers and timber beams which hold the plywood). The panels are made to measure depending on requirements.

BENEFITS

Minimum number of fillers between panels.

Easy jointing of walers and timber beams.

Guaranteed safety. Easy-to-assemble safety items.

Simple and tight panel joints with Panel Connectors.

Exerts a correcting function by absorbing possible deviations during assembly.

Less panel edge damage due to the design of the Panel Connector and Pin (its conical part brings the panels closer together and its cylindrical part fixes their position).

ENKOFORM VMK. Timber beam wall formwork based on MK system. The difference is the use of MK walers in the latter.

Common standard accessories shared with other ULMA formwork systems: push-pull props, climbing brackets, anchors, etc.

Lower transport volume when moving the items in dismantled state.

1 Climbing systems

Formwork solution for all geometries of vertical concrete structures.

5 Corners at 90

3 Columns


6 Corners not 90

7 Bulkheads

8 Fillers

9 Beam VM20 Connection Plate

10 Working bracket

11 Lifting

12 Stabilisation

4 Pilaster - 90 wall intersections

90 corners - inside

1

3

11

2 7 8

12

5

4 6

9

10

ENKOFORM V-100



BENEFITS

52 5352 53

BASIC COMPONENTS


Waler connector 1960009 4.2

Adjustable connector 0.8 1960018 5.1

Panel connector 1960000 6

T connector 1960270 8.1

Articulated connector 1960027 7.5

Column connector 1960365 11.5

Articulated connector-strut 1960500 14.2

Timber beam VM 20/1.45 1940191 7.3

Timber beam VM 20/1.9 1940172 9.5

Timber beam VM 20/2.15 1940197 10.8

Timber beam VM 20/2.45 1950129 12.3

Timber beam VM 20/2.65 1940196 13.3

Timber beam VM 20/2.9 1940144 14.5

Timber beam VM 20/3.3 1950130 16.5

Timber beam VM 20/3.6 1940146 18

Timber beam VM 20/3.9 1950112 19.5

Timber beam VM 20/4.5 1940178 22.5

Timber beam VM 20/4.9 1950113 24.5

Timber beam VM 20/5.9 1940149 29.5

Waler-VM20 clamp 2T 1960375 0.81

Waler-VM20 angular clamp 1960345 1.3

Lifting bracket E V-100 1960220 10.2

Pin E20x190 1960003 0.4

Cotter pin R/5 0250000 0.03

Waler DU-100/0.5 1960005 10.2

Waler DU-100/0.75 1960007 15.4

Waler DU-100/1 1960010 20.5

Waler DU-100/1.25 1960012 25.6

Waler DU-100/1.5 1960015 31.1

Waler DU-100/2 1960020 41.3

Waler DU-100/2.5 1960025 52

Waler DU-100/3 1960030 63

Waler DU-100/3.75 1960037 78

Waler DU-100/5 1960050 103

Waler DU-100/6 1960060 125

Waler 90 550 1960355 19.7

Waler 90 550x1050 1960360 30.3

Circular walls

Columns with Column connector

90 corners - outside

Bulkheads

Pilasters - 90 wall intersections

With Compensation Plate With Adjustable Connector

kg kgkg

Corners not 90


54 55

EFFICIENT, LONG-LASTING, ADjUSTABLE

BENEFITS

BIRA Formwork in curved walls

Compatible with ORMA formwork.

Circular Steel Formwork

High-strength steel shuttering face.

Wide range of panel heights (intervals of 25 cm are possible).

Panels with only 2 rows of anchors.

One width per model (inside, outside).

Simple curvature blocking.

Built-in components for lifting, vertical panel connection and levelling.

Reduced number of accessories.

Safe assembly.

Quick jointing of panels with clamps.

Vertical and horizontal panel connection

Racks for the curving of panels

Designed for the forming of curved walls. Simple mechanism for the adjustment to the required curvature.


Tanks

Compatibility with ORMA formwork

Continuity for curved walls

Side wall solution

FEATURES Permissible concrete pressure

- 60 kN/m2 with tie rod 15 mm- 80 kN/m2 with tie rod 20 mm

BIRA Formwork is available in imperial measurements.- Concrete pressure: 1650 psf

Minimum curvature radius: 2.2 m

BASIC COMPONENTS


Compensation clamp 1905142 5.6

Outside panel 3x2.25(6.75m2) 1905001 629

Inside panel 3x2.2(6.6m2) 1905009 616

Outside panel 2x2.25(4.5m2) 1905003 502

Inside panel 2x2.2(4.4m2) 1905011 490

Outside panel 1.5x2.25(3.37m2) 1905005 420

Inside panel 1.5x2.2(3.3m2) 1905013 409

Outside panel 0.5x2.25(1.12m2) 1905016 80

Inside panel 0.5x2.2(1.1m2) 1905017 79

Outside panel 0.25x2.25(0.5m2) 1905007 45.5

Inside panel 0.25x2.2(0.55m2) 1905015 45

Outside 10 1905501 1402

Inside 10 1905509 1371

Outside 8 1905503 1228

Inside 8 1905511 1199

Outside 6 1905505 1034

Inside 6 1905513 1012

Outside 4 1905507 705

Inside 4 1905515 699

kg kg

lb

BIRA


56 57

Lifting, safe working platforms and stabilisation

INEXPENSIVE, RELIABLE, ADjUSTABLE

BENEFITS

Panel vertical connection for walls of great height.

Compatible with ORMA Modular Formwork.

Minimal accessories, common to ORMA and ENKOFORM V-100.

Lifting bracket built-in in the panel.

Safe working platforms and push-pull props common to other vertical formwork systems of ULMA.

Racks with templates for the curving of panels.

Quick and easy panel jointing with ORMA Clamp.

Timber Beam Circular Formwork

Shuttering face of phenolic plywood. Easily replaceable and suitable for the nailing of other wood parts.

Wide height range of panels: 1.5 m; 3 m; 4 m and 5 m.

A single width for each type: inside 2.4 m and outside 2.5 m.

Developed for the construction of circular walls. Panels consisting of main steel beams, secondary timber beams and phenolic plywood. The

requested radius of curvature is obtained by adjusting the push-pull props that join the main beams.


FLECTOR Conventional Circular Formwork

Phenolic board for excellent wall finishing

Configuration of tying through walers

Configuration of panel joint with FLECTOR Connector

Climbing system in circular walls of great height

FEATURES


Minimum inside radius: 4 m

Anchoring:

- Configuration of tying through walers- Configuration of panel joint with FLECTOR Connector

BASIC COMPONENTS

FLECTOR Int Panel 5m (12m2) 1950500 822

FLECTOR Ext Panel 5m (12.5m2) 1950501 829

FLECTOR Int Panel 4m (9.6m2) 1950400 662

FLECTOR Ext Panel 4m (10m2) 1950401 667

FLECTOR Int Panel 3m (7.2m2) 1950300 519

FLECTOR Ext Panel 3m (7.5m2) 1950301 523

FLECTOR Int Panel 1.5m (3.6m2) 1950150 300

FLECTOR Ext Panel 1.5m (3.75m2) 1950151 302

kg


Push-pull prop 1,5 0,44-0,66 0212125 6.2

Push-pull prop 1 0,36-0,52 0212100 2.4

FLECTOR waler 1950208 16.4

kg

FLECTOR


595958

Built-in connecting elements Panel lifting

Reinforced corners

Chamfered column edges with chamfer strips


DURABLE, COST-EFFECTIVE

BENEFITS

Efficiency of panels (long-lasting plastic shuttering face).

Special panel stabilisation system.

Lifting of gang.

Columns in residential construction

Built-in and captive connecting elements in panels.

Wide range of panels that can be handled without crane.

Few components.

Chamfered column edges with chamfer strips (between two panels, without nails).

Panels jointing on top of each other with NEVI Clamp. Maximum column height 5 m, small panels located at bottom.

Light Column Formwork

Designed for square or rectangular cross-sections of columns in residential construction.

Panels handled without crane


High permissible concrete pressure: 80 kN/m2.

Possibility to construct short walls. Lateral panel joint with clamp (maximum columns dimension 1.3 x 1.3 m).

Panel range:- Heights: 3 m; 1 m and 0.5 m.- Widths: 0.7 m and 0.5 m.

Robust system. Steel frame with reinforced corners ensures a longer life of the panel.

Panel width Panel 0.7 m Panel 0.5 m

Smallest column (mm) 300x300 150x150

Largest column (mm) 600x600 400x400

LGR panel 3x0.7 1856050 74

LGR panel 3x0.5 1856065 58

LGR panel 1x0.7 1856060 29.5

LGR panel 1x0.5 1856070 22.6

LGR panel 0,5x0.7 1856075 16.9

LGR panel 0,5x0.5 1856080 12.9

NEVI clamp 1920851 4

NEVI lifting hook 1920835 8

Chamfer strip LGR 3m (16 units) 1856061 0.45

Push-pull prop head 1856140 1.5

Push-pull prop 2.5-3.85 1856120 19.8

Push-pull prop 1.55-2.5 1856130 9.2

kg

BASIC COMPONENTSLGR


60 61

FAST, EASY-TO-USE, LIGHT

BENEFITS

Hinged system: Very fast erection and dismantling.

Guaranteed safety: easy-to-integrate working platforms and access ladders.

High quality concrete finishing (plywood screwing from the back).

Holes for fixing of push-pull props.

Easy and safe for the construction of square and rectangular columns of many dimensions.

The built-in wheels allow the movement without crane.

Plywood built-in into the frame.

Chamfered column edges with chamfer strips (between two panels, without nails).

Panel joints on top of each other.

Space-saving transport: folding system.

Fast and safe lifting and moving (with lifting ring and wheel).

Articulated Column Formwork APPLICATIONS AND SOLUTIONS

Detail of F-4 MAX Column formwork

Lifting and placing of F-4 MAX panels

FEATURES

Column width: between 20 and 60 cm

Panel height: 3.5 m; 2.75 m; 1 m; 0.5 m

Adjustment interval every 5 cm


Square and rectangular columns with F-4 MAX Column Formwork

BASIC COMPONENTS

Panel F-4 MAX 3500 1857350 216

Panel F-4 MAX 2750 1857275 165

Panel F-4 MAX 1000 1857100 71

Panel F-4 MAX 500 1857050 40

Locking hook F-4 MAX 1857120 1.3

Wheel bracket F-4 MAX 1857025 8.4

Castor 200 2127961 11.8

kg

F-4 MAX


636362

Access with BRIO towersCLR Column Formwork

BASIC COMPONENTS

1.20 m pier

Lifting and stabilisation

Compatible with ORMA

Excellent concrete finishing

APPLICATIONS

QUICK, SIMPLE, HEAVY-DUTY

BENEFITS

Wide range of diameters: 0.3 m to 1 m every 5 cm (in addition, there is a version of 1.20 m).

Lifting points and stabilisation built-in in the panel.

Excellent concrete finishing.

Simple jointing of panels with bolts (consisting of bolt and captive wedge).

Circular Column Formwork

Semi-circular steel panels fastened with bolts make up the circular mould.

FEATURES


Panels of 3 different heights:

- H = 0.5 m

- H = 1 m- H = 2 m

Circular panel 2/1.2 1855351 242

Circular panel 1/1.2 1855352 129

Circular panel 0.5/1.2 1855383 69

Bolt 1850134 0.29

ORMA-CLR connection 1m 1855198 17.3

ORMA-CLR connection 2m 1855197 33.5

kg

CLR panel 2/1(3.14m2) 1855053 157

CLR panel 2/0.95(2.98m2) 1855052 150

CLR panel 2/0.9(2.83m2) 1855051 143

CLR panel 2/0.85(2.67m2) 1855033 136

CLR panel 2/0.8(2.51m2) 1855032 128

CLR panel 2/0.75(2.36m2) 1855031 121

CLR panel 2/0.7(2.2m2) 1855030 114

CLR panel 2/0.65(2.04m2) 1855029 88

CLR panel 2/0.6(1.88m2) 1855016 83

CLR panel 2/0.55(1.73m2) 1855015 79

CLR panel 2/0.5(1.57m2) 1855014 73

CLR panel 2/0.45(1.41m2) 1855013 67

CLR panel 2/0.4(1.26m2) 1855002 61

CLR panel 2/0.35(1.1m2) 1855001 54

CLR panel 2/0.3(0.94m2) 1855000 48.2

CLR panel 2/0.25(0.79m2) 1855094 42.5

CLR panel 1/1(1.57m2) 1855093 80

CLR panel 1/0.95(1.49m2) 1855092 76

CLR panel 1/0.9(1.42m2) 1855091 73

CLR panel 1/0.85(1.33m2) 1855085 69

CLR panel 1/0.8(1.26m2) 1855084 65

CLR panel 1/0.75(1.18m2) 1855083 61

CLR panel 1/0.7(1.1m2) 1855082 58

CLR panel 1/0.65(1.02m2) 1855081 45.7

CLR panel 1/0.6(0.94m2) 1855076 43

CLR panel 1/0.55(0.86m2) 1855075 40.7

CLR panel 1/0.5(0.78m2) 1855074 38

CLR panel 1/0.45(0.71m2) 1855073 34.7

CLR panel 1/0.4(0.63m2) 1855068 31.7

CLR panel 1/0.35(0.55m2) 1855067 28

CLR panel 1/0.3(0.47m2) 1855066 25

CLR panel 1/0.25(0.39m2) 1855127 21.9

CLR panel 0.5/1(0.78m2) 1855126 36.6

CLR panel 0.5/0.95(0.74m2) 1855125 35

CLR panel 0.5/0.9(0.71m2) 1855124 33.2

CLR panel 0.5/0.85(0.66m2) 1855118 31.6

CLR panel 0.5/0.8(0.63m2) 1855117 29.5

CLR panel 0.5/0.75(0.59m2) 1855116 27.6

CLR panel 0.5/0.7(0.55m2) 1855115 26

CLR panel 0.5/0.65(0.51m2) 1855114 24.5

CLR panel 0.5/0.6(0.47m2) 1855109 22.9

CLR panel 0.5/0.55(0.43m2) 1855108 22

CLR panel 0.5/0.5(0.39m2) 1855107 20.5

CLR panel 0.5/0.45(0.36m2) 1855107 19

CLR panel 0.5/0.4(0.32m2) 1855106 17.5

CLR panel 0.5/0.35(0.28m2) 1855101 15

CLR panel 0.5/0.3(0.23m2) 1855100 13.5

CLR panel 0.5/0.25(0.2m2) 1855099 11.7

kg

CLR


656564

SIMPLE, ROBUST, RELIABLE

BENEFITS

BASIC COMPONENTS

EUC 5.4 with ORMA

Loop anchor configuration

Fix anchor configuration

Anchor to the concrete floor

SMK system

APPLICATIONS

There are two systems available depending on the wall height: UCAB Walers and EUC Frames.

UCAB Frames: for wall heights up to 3.3 m. EUC Frames: for wall heights up to 7.2 m

Compatible with all ULMA wall formwork systems.

Quick and easy fixing to panels with heads. Fixing to the ground with lost anchors left in the previously built concrete floor; the concrete pressure is transferred to these anchors and to the ground through the structure.

UCAB-EUC FRAMES

EUC Base Frame 7.2 with MEGAFORM

The structures are moved together with the formwork panels to subsequent pouring stages.

Built-in working platforms: guaranteed safety for handling at height.

UCAB push-pull prop 2.4-3.3 1907140 38.5

UCAB push-pull prop 2-2.85 1907090 34

DW-15 Anchor

Loop anchor DW15 1861847 2.1

Fix anchor DW15 0230005 0.56

Tie rod 15/1.2 0230120 2

Hexagonal coupler 15 30x100 7238003 0.3

Plate nut 15 7238000 0.73

DW-20 y DW-26 Anchors

Loop anchor DW20 1907175 4

Loop anchor DW26 1907176 8.9

Fix anchor DW20 0238025 0.97

Plate washer nut 20 1905160 1.2

Tie rod 20/1.2 0234120 3.1

Fix anchor DW26 0238036 1.9

Tie rod 26/1.15 1907131 5.4

Base plate 150x150x15 (D31) 1861854 2.6

kg

SMK FRAMESSingle-sided formwork solution with truss structure consisting of MK walers up to 10.5 m height.

EUC base frame 1907007 325

EUC top frame 1907006 54

EUC intermediate frame 1907005 350

UCAB frame 3.3 1907003 123

UCAB frame 2.7 1907001 110

kg

Single-Sided Formwork Systems

UCAB Frame 3.3 with ENKOFORM V-100

Structures designed to withstand concrete pressure without anchors passing through the wall to be build.


676666

Common AccessoriesSAFE, COMPATIBLE, RESISTANT

ORMA stabilisation Anchoring system section

BENEFITS

Compatible with different column formwork systems of ULMA: ORMA, LGR, NEVI, MEGA-FORM, MEGALITE, F-4 MAX and CLR.

Direct fixing to formwork panels (without lower support structure).

Simple and easy to erect and dismantle on the ground as formwork panels.

Fixing brackets for different access ladders.Guaranteed safety for the pouring of columns.

Entire platform perimeter protected with inside handrails.

One platform per column for complete safety.

Adaptable to any column size.

Folding outside handrails (minimum volume of transport).

Built-in lifting elements.

Platform on F-4 MAX Platform on LGR

Platform on CLR

Platform on ORMA


Dimensions: 165 x 75 cm.

Platform (main structure and outside handrails).

Maximum load: 1.5 kN/m2, class 2, according to standard EN-12811.

Inside handrails.

Ladder with protection.

PUSH-PULL PROPS

UNIVERSAL COLUMN PLATFORM

Wide range for the plumbing and stabilisation of formwork.

ANCHORAGESReusable elements of high resistance to withstand concrete pressure.

Safety item for the pouring works of concrete columns.

Universal column platform 1908600 125

Fixing bolt 1908608 1.3

Ladder C2,1 0333008 14.1

Ladder C3 0333009 19.4

Ladder protection 0333012 13.1

Ladder protection ring 0333025 2.3

BASIC COMPONENTSkg

Push-pull prop 1.1-1.7 1900134 7.8

Push-pull prop 2.4-3.5 1900123 24.2

Push-pull prop 3.6-4.8 1908168 43.3

Push-pull prop 5-6 1900147 51

Push-pull prop 6-10 1900207 99

Push-pull prop 1.55-2.55 1856130 9.2

Push-pull prop 2.5-3.85 1856120 19.8

Push pull prop E 0.51-0.75 1960210 10.6

Push pull prop E 0.75-1.05 1960100 14.1

Push pull prop E 1-1.55 1960110 18.8

Push pull prop E 1.51-2.2 1960115 24.1

Push pull prop E 2.15-2.75 1960130 33.2

Push pull prop E 2.7-3.3 1960125 37.8

Push pull prop E 3.25-4 1960410 44.6

Push-pull prop E shoe 2 D20x48 1960545 6.8

Push pull prop TR63X6 1.52-2.2 1991514 41.7

Push pull prop TR63X6 2.04-2.72 0333014 46.6

Push pull prop shoe TR63 0333055 7

kg

BASIC COMPONENTSBASIC COMPONENTS

Tie rod 15/1 0230100 1.7

Tie rod 15/1.2 0230120 2

Tie rod 15/1.5 0230150 2.2

Tie rod 15/2 0230200 3.3

Tie rod 15/6 0230600 8.6

Tie rod 20/0.15 0234100 2.6

Tie rod 20/1 0234120 3.1

Tie rod 20/1.2 0234150 3.8

Tie rod 20/1.5 0234200 5.1

Tie rod 20/6 0234600 15.4



Plate nut D15 200x150 1908158 2.6

Spacer tube 22/25(75ml) 7230455 0.16

Spacer tube 22/26 (100ml) 7238047 0.23

Spacer tube 22/29 (50ml) 1905814 0.19

Spacer tube 32/36 (50ml) 9371968 0.30

Cone 22 (250 units) 7230264 0.006

Cone 26 (250 units) 7238048 0.007

Cone 32 (250 units) 9371967 0.03

kg


696968

Self-Climbing SystemsAUTOMATIC, SAFE AND RELIABLE

Formwork support structure for the construction of walls and other vertical structures without crane (hydraulic and mechanical mechanisms).

The climbing process consists of the successive elevation of the mast and the climbing bracket-formwork-set erection along the wall surface.

Self-Climbing Bracket ATR

Self-Climbing Bracket ATR-B

1

1

Mast

Control platform

3

3

Self-Climbing Bracket Shoe

Main platform

2

2

Cylinder

Cone recovery platform

4

4

Upper Climbing Head

Pouring platform

5

5

Lower Climbing Head

Upper intermediate platform

6

6

Support block

Roll-Back Carriage ATR

7

7

Anchor Bracket

Push-Pull Props TR

Formwork

Formwork

8

8

9

9

COMPONENTS

COMPONENTS

Flexible and versatile for all types of requirement in the construction of high-rise buildings.

Easy to adapt due to MK System components: closures, installation of platforms, safety and cone recovery.

Hydraulic push: superior performance compared to conventional climbing with crane. Very fast construction pace.

Almost complete autonomy from crane assistance. Formwork, working platforms and concrete placing boom can be simultaneous lifted.

Operational even in adverse weather conditions.

High load capacity.

Hydraulic power unit Operates up to 12 cylinders simultaneously. Large formwork sets can be easily lifted.

Roll-back carriages for works between formwork panels.

Safety in lifting and handling at great heights.

The working load of each cylinder can be controlled separately.

Climbing brackets are anchored to the wall with cones embedded in the concrete (absorption of horizontal and vertical loads).

Main accessories are common throughout the product range.

Compatible with all vertical formwork systems and with MK System.

Adaptable to complex wall geometries.

Large and protected working platforms. Safe access.

Self-climbing bracket configuration. Formwork panel moving with roll-back carriages (70 cm) on the bracket itself. Components for the horizontal and vertical plumbing and positioning of the formwork. Two platforms: main working platform (2.5 m width) and control platform for the operation of the hydraulic system. 3 optional platforms for pouring, items recovery and other tasks.

SELF-CLIMBING BRACKET ATR-B

BENEFITS

8

9

5

4

6

3

2

7

5

9

6

7

8

2

1

3

4

Construction of core with ATR Self-Climbing system

1

ATR

Products Climbing Systems

70 7170 71

Self-Climbing Narrow Bracket ATR-N

Concrete pouring

1

1

1

Control platform3

Main platform

Stripping

2

2

2

Cone recovery platform4

Placing of anchors

- Lifting of mast

- Recovery of lower anchors

3

3

Structure elevation4

4

Outrigger structure5

Adjustable hanging panel6

Fixed hanging panel7

Pouring platform

Push-pull props

Formwork

8

9

10

COMPONENTSUsed in narrow shafts between walls Widths between 1.75 and 2.5 m where the ATR-B bracket cannot be used. Formwork hanging from upper structure for stripping, panel backward moving and positioning works.

Used in shafts where for reasons of dimensions, loads or geometry, a platform system performs better than self-climbing brackets.

Structure using MK profiles. It can adjust to different geometries and be fitted with different formwork stripping systems (carriages or outrigger structures). Structures for concrete placing booms can be assembled on this system.

SELF-CLIMBING NARROW BRACKET ATR-N

SELF-CLIMBING PLATFORM ATR-P

SEQUENCE OF LIFTING OF THE SELF-CLIMBING SYSTEM ATR

5

76

8

10

9

2

1

3

4

Self-Climbing Platform ATR-P


72 7372 73

APPLICATIONS AND SOLUTIONS BASIC COMPONENTS

Selfclimbing bracket shoe NV 0335130 61

Telescopic head ATR-P 0336000 218

Beams DU-240 ATR-P

Upper climbing head NV 0338002 30.3

Lower climbing head NV 0338071 27.9

Anchor bracket NC 0339002 21

Double anchor bracket 0339030 23.5

Double cone NC wall anchor 0339024 18

Double cone NC positioner 0339026 1.7

Cylinder ATR 100kN 0338100 45

Cylinder ATR 100kN signal 0338150 53

6P, 4P and 2P auto hydraulic power units

ATR-B bracket 0335240 379

ATR-B bracket body 0335245 262

ATR-N narrow bracket 0335250 206

Roll-back carriage ATR 0335066 65

Roll-back rack 0335048 7.3

Gear device 0335126 5.7

Gear device handle 0335166 0.74

kg kgkg


74 75

Hydraulic Windshield SystemTOTAL SAFETY AND PROTECTION AT HEIGHT

Based on MK System (standard walers with simple connecting elements). Adaptable to different geometries and configurations according to requirements.

Safety item for the perimeter of buildings at great height. Covers the floor under construction and the floors immediately below.

Mast1

Slab Bracket HWS3

Vertical waler2

Head HWS4

Cylinder HWS5

Climbing Head HWS6

COMPONENTS

Prevents falls from the slab edge.

Excellent protection against the inclemency of the weather.

Platform for works at the slab edge.

Protects against the visual height effect.

Hydraulic self-climbing elevation, without crane.

1. Anchoring system in slab

3. Anchoring system in wall

Can be anchored to slab or wall.

ANCHORAGE OF HWS TO SLAB OR WALL:

2. Anchoring system on slab edge

Adapts well to the geometry of irregular slabs.

Material lifting platforms can be part of the windshield panels.

STANDARD HWS WINDSHIELD CONFIGURATIONS

Type A: standard section

Type B: standard section with working platform

Type C: simple section with platform

Type D: debris section Type E: straight section

BENEFITS


2

1

3

3

3

6

5

4

4

Self-climbing system, hydraulic power unit and cylinders

HWS Hydraulic Windshield System. Platforms for the deposit and lifting of material

HWS


76 7776 77

BASIC COMPONENTS

Climbing head HWS 1991300 13.9

Cylinder HWS 1991350 28.4

Hydraulic power unit HWS 1991310 130

Self-climbing block HWS 1991370 4.1

Mast hinge HWS 1991205 36.5

Waler MK-120 (from 1.125 m to 5.625 m)

Profile MK-180 ( from 0.5 m to 6.625 m)

Spacer tube MK-120/52 1990200 0.46

Bolt M16x90 DIN-931-8.8 0241690 0.17

Nut M16 DIN-934-8.8 0241600 0.03

RKS

Main support RKS 1991260 15.8

Additional profile RKS 1991270 14

Head HWS 1991100 26.1

Slab-end bracket HWS 1991105 16.8

Wall bracket HWS 1991115 9.7

Slab bracket HWS 1991110 39.1

kg kgkg

Main platform1

Pouring platform3

Cone recovery platform2

Mast4

Anchors5

Roll-back carriage6

Push-pull prop7

Formwork8

COMPONENTS

It enables the panel climbing without separating the structure from the wall. This makes lifting operations safe under any weather conditions.

Lifting of the entire structure by crane with the option of incorporating a hydraulic system for lifting without crane.

Benefits

Safe climbing to great heights.

Versatile and adaptable (MK profiles).

Formwork stripping distance: 70 cm. Large and secure platforms.

Hydraulic lifting possible.

RKS - RAIL CLIMBING SySTEM

3

7

6

1

2

5

4

8


797978

Climbing bracket BMK-240 1991424 231

Climbing bracket BMK-170 1991417 163

Waler screw TR53x6 0302020 10.8

Connector MK screw waler base 1991517 15.1

Waler MK-120 screw bracket 1991570 13.5

kg

BASIC COMPONENTS

Construction of piers with BMK

APPLICATIONSClimbing Bracket with MK SystemVERSATILE, ROBUST AND DISMOUNTABLE

BENEFITS

High flexibility guaranteed with few components.

Fully dismountable due to its independent walers joined with bolts. Minimum transport volume.

Completely adaptable even to inclined and circular walls.

Several standard configurations for both sides of the wall.

For Building Construction and Civil Works.

For Building Construction and Civil Works.

For Civil Works.

Platform width: 170 cm.

Platform width: 170 cm

35 m2 formwork surface per pair of climbing brackets.

Anchorage to wall: DW20

Anchorage to wall: DW15, DW20.

Formwork stripping distance: 5 cm to 15 cm with tilt-back system.

Formwork stripping distance: 5 cm to 15 cm with tilt-back system.

Adaptable to inclined walls.


Platform width: 240 cm. 35 m2 formwork surface per pair of climbing brackets. Anchorage to wall: DW15, DW20. Formwork stripping distance: 70 cm with roll-back carriage, or 5 cm to 15 cm with tilt-back system. Adaptable to inclined walls.

It consists of standard MK Walers, specific BMK accessories and other items of the MK system.

1

3

2

4

5

6

7

8

9


CLIMBING BRACKET BMK-240:

CLIMBING BRACKET BMK-170:

Climbing Bracket BMK

Main platform

Pouring platform


Stripping system

Push-pull prop

Vertical waler

Anchor

Formwork

Single-sided BMK head 1991590 34.4

Waler MK-120 (from 1.125 m to 5.625 m)

Push-pull prop TR63 2.04-2.72 0333014 46.6

Push-pull prop TR63 1.52-2.2 1991514 41.7

Push-pull props E (from 2.15 m to 4 m)

kg

Single-Sided Climbing bracket

Roll-back system of climbing bracket

BMK SINGLE-SIDED CLIMBING BRACKET:

3

2

1

4

5

6

9

8

7

BMK


8080

CR-250 climbing brackets in pier construction

Conventional Climbing BracketROBUST, DESIGNED FOR LARGE FORMWORK GANGS

FEATURES

Application: Civil Works and Building Construction.

Up to 35 m2 formwork surface per pair of climbing brackets.


Anchorage to wall: DW20 (DW15 possible).

Formwork stripping distance: 70 cm with roll-back carriage; 5 cm with tilt-back system.

Formwork height adjustment with levelling screw jacks without releasing the clamps between formwork and vertical waler.

COMPONENTS

1

3

2

4

5

6

7

8

9

10

Climbing Bracket CR-250

Main platform

Pouring platform

Intermediate platform


Stripping system

Push-pull prop

Vertical waler

Anchor

Formwork

CR-250 bracket roll-back 0331000 210

Waler screw TR53x6 0302020 10.8

Waler screw bracket TR53x6 0302022 12.3

Tilt-back base 0332022 18.8

Connector screw TR-waler base 0332030 18

Waler base connector 0331008 11.4

Waler DU-120 (from 1 m to 6 m)

Push-pull prop TR63 2.04-2.72 0333014 46.6

kg

BASIC COMPONENTS

3

4

7

2

1

5

6

9

10

8

CR-250

Certified product:


8181

Used for lift and staircase shafts, hollow piers or other types of gaps where it is necessary to support formwork panels.

Combined use with conventional climbing systems at the outside of the wall.

Certified product

Platform for The Support of Formwork in ShaftsVERSATILE AND ADjUSTABLE

BENEFITS

Covers any distance with completely standard and modular material, mainly walers and timber beams.

Easy adjustment of all kinds of formwork.

Two solutions depending on anchor type:

Gravity Pawl Bracket with GP Box-Out: used in Civil Engineering projects, in solutions for hollow piers and gaps between walls. The bracket rests on the bottom side of the cavity made while pouring the previous stage.

Folding Bracket with adjustable bracket: commonly used in building construction, especially for fair-faced con crete walls. No holes are required in the wall. The adjustable bracket rests on the folding bracket, fixed to the wall with DW15 cone.

Versatile Gravity Pawl Bracket Adaptable to all waler types and different lengths.

Gravity pawl bracket 0306032 22.2

Short gravity pawl 0306054 15.1

Gp box-out 0306001 1.5

Gp retrievable box-out 0306002 6.2

Folding bracket M24 0306020 13.6

Adjustable bracket 0306072 8.7

Walers DU-100 (from 0.5 m to 6 m)

Walers DU-120 (from 1 m to 6 m)

Walers MK-120 (from 1.125 m to 5.625 m)

Profiles MK-180 (from 1.125 m to 5.625 m)

Timber beam VM 20 (from 1.45 m to 5.9 m)

Waler-VM20 clamp 2T 1960375 0.81

kg

BASIC COMPONENTS

Platform support on GP Box-Out with gravity pawl bracket Platform support on folding bracket

KSP

8282

BF-170 climbing brackets with ENKOFORM V-100 formwork

Folding Climbing BracketLIGHTWEIGHT ALL-ROUND TALENT

FEATURES

Suitable for any type of building construction.

20 m2 formwork surface per pair of climbing brackets.


Anchorage to wall: AWF, DW15.

Roll-back carriage for formwork panel stripping.

BF-170 with sockets for handrail and supports for beams for working platform.

COMPONENTS

1

3

2

4

5

6

7

8

9

Climbing Bracket BF-170

Main platform

Pouring platform


Stripping system

Push-pull prop

Vertical waler

Anchor

Formwork

Climbing bracket BF-170 body 1901701 63

Tilt back base BF-170 1901743 13.5

Push pull prop head 1901757 2.8

Waler clamp BF-170 1901781 22.5

Waler DU-100 (from 1 m to 6 m)

Push-pull props E (from 2.15 m to 4 m)

kg

BASIC COMPONENTS

3

6

2

1

7

9

8

4

BF-170


5

83

They are located on the perimeter of the building. They are moved from one floor to the next as the building grows in height.

Perimeter Working PlatformsSTABLE AND SAFE WORK AT HEIGHT

They work as formwork support and for subsequent tasks (closing walls or repair works on walls).

Formwork lifting separate from platform lifting.

ORMA PLATFORM

PERIMETER PLATFORM BF-170

Features

Features

For building construction.

Ensures safety for works at height having incorporated all necessary elements.

Application: Building Construction.

Platform width: 1.3 m

Platform width: 1.7 m.

Maximum formwork height: 3.9 m.

Maximum formwork height: 3.9 m.

Load capacity class 2 (1.5 kN/m2) according to standard EN-12811.

Load capacity class 5 (4.5 kN/m2) according to standard EN-12811.

Anchorage to wall with AWF or DW15 cones.

Anchorage to wall with AWF or DW15 cones.

Overcoming window openings is possible.

Foldable working platform for easier transport.

ORMA climbing bracket 1900386 36.5

kg

BASIC COMPONENTS

Folding platform 3x1.70 1901800 370

Corner folding platform 1901834 230

BASIC COMPONENTSkg

8484

Very effective for the construction of straight or inclined single-sided walls: dams, canals, floodgates, cooling towers, galleries, tunnels, etc.

Single-Sided Climbing SystemsSTRAIGHT OR INCLINED SINGLE-SIDED CLIMBING

They are capable to bear heavy loads originating from concrete pressure They consist of welded tubes and profiles of great resistance which combine with accessories from the BMK climbing and MK system.

Working platform and formwork can be lifted simultaneously to the next pouring stage.

Designed to build walls with great inclinations and working platforms in horizontal position fulfilling any safety requirement.

CLIMBING BRACKET SBF-185

CLIMBING BRACKET SBM-240

CLIMBING BRACKET SBD-170

Features Features Features

Application: Civil Works (dams) and Building Construction.

Application: Civil Works and Building Construction.

Application: dam construction.

Maximum formwork height: 4 m. Maximum formwork height: 4 m. Maximum formwork height: 3 m.

Platform width: 185 cm. Platform width: 240 cm. Platform width: 170 cm.

Anchorage to wall: DW20 - DW26. Anchorage to wall: DW20 - DW26.

Standard MK walers can be used as vertical walers.

Anchorage to wall: DW20.

Roll-back carriage for formwork panel stripping. Formwork stripping distance: 65 cm with roll-back carriages.


Roll-back carriage for formwork panel stripping.

Standard MK walers can be used as vertical walers.




85

Embedded in the concrete, these anchorages hold the different brackets for the construction of walls with climbing systems or for the installation of working platforms.

Anchoring Systems for Climbing SystemsSAFE SUPPORT FOR CLIMBING SYSTEMS

BENEFITS

Almost all the components are recoverable for reuse.

Anchor types: AWF, DW15, DW20 and DW26.

COMPONENTS

1

3

2

4

5

Bolt

Climbing ring

Cone

Tie Rod

Fixed Anchor

BASIC COMPONENTS

AWF Anchor

Cone AWF 0238005 0.54

Climbing ring AWF 0238006 0.51

Bolt M24x100 DIN-931-8.8 0242410 0.46

Fix anchor DW15 0230005 0.56

Tie rod 15

DW15 Anchor

Cone DW15/M24 1901080 1

Climbing ring NT15 1901083 0.8

Bolt M24x120 DIN931-10.9 9053013 0.54

Fix anchor DW15 0230005 0.56

Tie rod 15

DW20 Anchor

Cone DW20/M30 0238050 2

Climbing ring NT20 0238043 1.6

Bolt M30x130 DIN-931-10.9(PAV) 0243013 0.92

Fix anchor DW20 0238025 0.97

Tie rod 20

DW26 Anchor

Cone DW26/M36 0238060 3.1

Anchor ring DW26.5 0238063 1.8

Bolt M36x130 DIN-931-10.9 0243613 1.4

Fix anchor DW26.5 0238036 1.4

Tie rod 26

kg kg

1 3 4 5 2

2

1

8786

CC-4 PLY SYSTEM

Aluminium Slab FormworkLIGHT, SAFE, HIGHLY EFFICIENT AND EXCELLENT CONCRETE FINISHING

Recoverable system for solid or lightened slabs, ensuring superior concrete finishing.

Quick erection and dismantling due to aluminium structure and fast striking system, and always ensuring highest safety standards for the worker.

It allows the assembly of the grid previously to the placing of panels or plywood.

Slabs of up to 90 cm thickness, depending on grid size in use.

Lightness: High assembly efficiency.

Great flexibility: it allows a change in beam direction, 90 assembly possible.

Documents

ULMA General Catalogue [en]