UIUC - CS 433IBM POWER7

Adam KunkAnil JohnPete Bohman

Quick Facts

Released by IBM in 2010 (~ February) Successor of the POWER6 Shift from high frequency to multi-core Implements IBM PowerPC architecture v2.06

Clock Rate: 2.4 GHz - 4.25 GHz Feature size: 45 nm ISA: Power ISA v 2.06 (RISC) Cores: 4, 6, 8 Cache: L1, L2, L3 – On Chip

References: [1], [5]

Why the POWER7?

PERCS – Productive, Easy-to-use, Reliable Computer System DARPA funded contract that IBM won in order

to develop the Power7 ($244 million contract, 2006)▪ Contract was to develop a petascale supercomputer

architecture before 2011 in the HPCS (High Performance Computing Systems) project.

IBM, Cray, and Sun Microsystems received HPCS grant for Phase II.

IBM was chosen for Phase III in 2006.References: [1], [2]

Blue Waters

Side note: The Blue Waters system was meant to

be the first supercomputer using PERCS technology.

But, the contract was cancelled (cost and complexity).

History of Power

2004 2001 2007 2010

POWER4/4+

Dual Core Chip Multi Processing Distributed Switch Shared L2 Dynamic LPARs (32)180nm,

POWER5/5+

Dual Core & Quad Core MdEnhanced Scaling2 Thread SMTDistributed Switch +Core Parallelism +FP Performance +Memory bandwidth +130nm, 90nm

POWER6/6+

Dual Core High Frequencies Virtualization + Memory Subsystem + Altivec Instruction Retry Dyn Energy Mgmt 2 Thread SMT + Protection Keys 65nm

POWER7/7+

4,6,8 Core 32MB On-Chip eDRAM Power Optimized Cores Mem Subsystem ++ 4 Thread SMT++ Reliability + VSM & VSX Protection Keys+ 45nm, 32nm

POWER8

Future

First Dual Corein Industry

HardwareVirtualizationfor Unix & Linux

FastestProcessorIn Industry

MostPOWERful &ScalableProcessor inIndustry

References: [3]

POWER7 LayoutCores: 8 Intelligent Cores / chip (socket) 4 and 6 Intelligent Cores available

on some models 12 execution units per core Out of order execution 4 Way SMT per core 32 threads per chip L1 – 32 KB I Cache / 32 KB D

Cache per core L2 – 256 KB per coreChip: 32MB Intelligent L3 Cache on chip

Core

L2

Core

L2

Memory Interface

Core

L2Core

L2

Core

L2

Core

L2

Core

L2Core

L2

GX

SMPFABRIC

POWER

BUS

Memory++

L3 CacheeDRAM

References: [3]

POWER7 Options (8, 6, 4 cores)

References: [3]

POWER7 TurboCore

TurboCore mode 8 core to 4 Core 7.25% higher core frequency 2X the amount of L3 cache (fluid cache)

Tradeoffs Reduces per core software licenses Increases throughput computing Decreases parallel transactional based

workloads

POWER7 Core

Each core implements “aggressive” out-of-order (OoO) instruction execution

The processor has an Instruction Sequence Unit capable of dispatching up to six instructions per cycle to a set of queues

Up to eight instructions per cycle can be issued to the Instruction Execution units

References: [4]

Pipeline

Instruction Fetch

8 inst. fetched from L2 to L1 I-cache or fetch buffer Balanced instruction rates across active threads Inst. Grouping

Instructions belonging to group issued together Groups contain independent instructions

Branch Prediction

POWER7 uses different mechanisms to predict the branch direction (taken/not taken) and the branch target address.

Instruction Fetch Unit (IFU) supports 3-cycle branch scan loop (to scan instructions for branches taken, compute target addresses, and determine if it is an unconditional branch or taken)

References: [5]

Branch Direction Prediction Tournament Predictor (due to GSEL):

8-K entry local BHT (LBHT)▪ BHT – Branch History Table

16-K entry global BHT (GBHT) 8-K entry global selection array (GSEL)

All arrays above provide branch direction predictions for all instructions in a fetch group (fetch group - up to 8 instructions)

The arrays are shared by all threadsReferences: [5]

Branch Direction Prediction (cont.) Indexing :

8-K LBHT directly indexed by 10 bits from instruction fetch address

The GBHT and GSEL arrays are indexed by the instruction fetch address hashed with a 21-bit global history vector (GHV) folded down to 11 bits, one per thread

References: [5]

Branch Direction Prediction (cont.) Value in GSEL chooses between LBHT and

GBHT for the direction of the prediction of each individual branch Hence the tournament predictor!

Each BHT (LBHT and GBHT) entry contains 2 bits: Higher order bit determines direction (taken/not

taken) Lower order bit provides hysteresis (history of

the branch)References: [5]

Branch Target Address Prediction Predicted in two ways:

1. Indirect branches that are not subroutine returns use a 128-entry count cache (shared by all active threads).

▪ Count cache is indexed by doing an XOR of 7 bits from the instruction fetch address and the GHV (global history vector)

▪ Each entry in the count cache contains a 62-bit predicted address with 2 confidence bits

References: [5]

Branch Target Address Prediction (cont.) Predicted in two ways:

1. Subroutine returns are predicted using a link stack (one per thread).

▪ This is like the “Return Address Stack” discussed in lecture

Support in POWER7 modes: ST, SMT2 16-entry link stack (per

thread) SMT4 8-entry link stack (per thread)

Execution Units

Each POWER7 core has 12 execution units: 2 fixed point units 2 load store units 4 double precision floating point units (2x

power6) 1 vector unit 1 branch unit 1 condition register unit 1 decimal floating point unit

References: [4]

ILP

Advanced branch prediction Large out of order execution

windows Large and fast caches Execute more than one execution

thread per core A single 8-core Power7 processor can

execute 32 threads in the same clock cycle.

Exceptions

POWER7 Demo

IBM POWER7 Demo

Visual representation of the SMT capabilities of the POWER7

Brief introduction to the on-chip L3 cache

SMT Simultaneous Multithreading

Separate instruction streams running concurrently on the same physical processor

POWER7 supports: 2 pipes for storage instructions (load/stores) 2 pipes for executing arithmetic instructions

(add, subtract, etc.) 1 pipe for branch instructions (control flow) Parallel support for floating-point and vector

operationsReferences: [7], [8]

SMT (cont.) Simultaneous Multithreading Explanation:

SMT1: Single instruction execution thread per core SMT2: Two instruction execution threads per core SMT4: Four instruction execution threads per core

This means that an 8-core Power7 can execute 32 threads simultaneously

POWER7 supports SMT1, SMT2, SMT4

References: [5], [8]

Multithreading History

Thread 1 Executing

Thread 0 Executing

No Thread Executing

FX0FX1FP0FP1LS0LS1BRXCRL

Single thread Out of OrderFX0FX1FP0FP1LS0LS1BRXCRL

S80 HW Multi-thread

FX0FX1FP0FP1LS0LS1BRXCRL

POWER5 2 Way SMTFX0FX1FP0FP1LS0LS1BRXCRL

POWER7 4 Way SMT

Thread 3 Executing

Thread 2 ExecutingReferences: [3]

TLP

Cache OverviewParameter L1 L2 L3 (Local) L3 (Global)Size 64 KB

(32K I, 32K D)256 KB 4 MB 32 MB

Location Core Core On-Chip On-ChipAccess Time

.5 ns 2 ns 6 ns 30 ns

Associativity

4-way I-cache8-way D-cache

8-way 8-way 8-way

Write Policy

Write Through

Write Back Partial Victim

Adaptive

Line size 128 B 128 B 128 B 128 B

Cache Design Considerations On-Chip cache required for sufficient

bandwidth to 8 cores. Previous off-chip socket interface unable

to scale Support dynamic cores Utilize ILP and increased SMT latency

overlap

L1 Cache

I and D cache split to reduce latency Way prediction bits reduce hit

latency Write-Through

No L1 write-backs required on line eviction

High speed L2 able to handle bandwidth B-Tree LRU replacement Prefetching

On each L1 I-Cache miss, prefetch next 2 blocks

L2 Cache Superset of L1 (inclusive) Reduced latency by decreasing capacity L2 utilizes L3-Local cache as victim cache

Increased associativity

L3 Cache 32 MB Fluid L3 cache

4 MB of local L3 cache per 8 cores▪ Local cache closer to respective core, reduced latency

L3 cache access routed to the local L3 cache first Cache lines cloned when used by multiple cores

Cache Coherency

eDRAM Embedded Dynamic Random-Access

memory Less area (1 transistor vs. 6 transistor SRAM) Enables on-chip L3 cache

▪ Reduces L3 latency▪ Larger internal bus size which increases bandwidth

Compared to off chip SRAM cache▪ 1/6 latency▪ 1/5 standby power

Utilized in game consoles (PS2, Wii, Etc.)References: [5], [6]

Memory

2 memory controllers, 4 channels per core Exploits elimination of off-chip L3 cache

interface

32 GB per core, 256 GB Capacity 180 GB/s (Power6 75GB/s) 16 KB scheduling buffer

Maintaining The Balance

Energy Management

Three idle states to optimize power vs. latency

Nap Sleep “Heavy” Sleep

Energy Management

Nap Optimized for wake-up time Turn off clocks to execution units Caches remain coherent Reduce frequency to core

Energy Management

Sleep Purge and clock off core plus caches

“Heavy” Sleep Optimized for power reduction All cores sleep mode Reduce voltage of all cores Voltage ramps automatically on wake-up No hardware re-initialization required

Energy Management

Per-core frequency Scaling: -50% thru +10% frequency slew

independent per core. (DVFS) Supports energy optimization in partitioned

system configuration▪ Less utilized partitions can run at lower

frequencies▪ Heavily utilized partitions maintain peak

performance Each partition can run under different

energy saving policy

Energy Management Impact IBM research states the following

improvements in SPECPower_ssj2008 scores Adding dynamic fan speed control

▪ 14% improvement Static power savings (low power operation)

▪ 24% improvement Dynamic power savings (DVFS with Turbo

mode)▪ 50% improvement

PerformanceTechnology Chips Cores Threads GHz rPerf CPW

POWER7 2 16 64 3.86 195.45 105,200

POWER7 2 16 64 3.92 197.6 106,000

POWER7 2 8 32 4.14 115.86 57,450

rPerf – Relative performance metric for Power Systems servers.•Derived from an IBM analytical model which uses characteristics from IBM internal workloads, TPC and SPEC benchmarks.

•The IBM eServer pSeries 640 is the baseline reference system and has a value of 1.0.CPW – Commercial Processing Workload

•Based on benchmarks owned and managed by the Transaction Processing Performance Council.

•Provides an indicator of transaction processing performance capacity when comparing between members of the iSeries and AS/400 families.

Performance

Technology Chips Cores Threads GHz SPECint SPECfpPOWER7 2 16 16 3.86   71.5

POWER7 2 16 16 4.14 44.0

Technology Chips Cores Threads GHz OSSPECint

_rateSPECfp_

ratePOWER7 2 16 64 3.86 AIX 6.1 652 586

SPEC CPU2006 performance (Speed)

SPEC CPU2006 performance (Throughput)

Closing/Wrap-up

References 1. http://en.wikipedia.org/wiki/POWER7 2. http://en.wikipedia.org/wiki/PERCS 3. Central PA PUG POWER7 review.ppt

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCEQFjAA&url=http%3A%2F%2Fwww.ibm.com%2Fdeveloperworks%2Fwikis%2Fdownload%2Fattachments%2F135430247%2FCentral%2BPA%2BPUG%2BPOWER7%2Breview.ppt&ei=3El3T6ejOI-40QGil-GnDQ&usg=AFQjCNFESXDZMpcC2z8y8NkjE-v3S_5t3A

References (cont.)

4. http://www.redbooks.ibm.com/redpapers/pdfs/redp4639.pdf

5. http://www.serc.iisc.ernet.in/~govind/243/Power7.pdf

6. http://en.wikipedia.org/wiki/EDRAM 7.

http://www.spscicomp.org/ScicomP16/presentations/Power7_Performance_Overview.pdf

8. http://www-03.ibm.com/systems/resources/pwrsysperf_SMT4OnP7.pdf