Types of parts included in TraceParts DVD 2010 (2.6.1) · Types of parts included in TraceParts DVD 2010 (2.6.1) Category ANSI B18.16.3M Nuts Prevailing-Torque Hex Flange Nut ANSI

/ 599

TitleManufacturer Standard(s)

Types of parts included in TraceParts DVD 2010 (2.6.1) Category

Prevailing-Torque Hex Flange NutANSI B18.16.3M Nuts

Prevailing-Torque Hex NutANSI B18.16.3M Nuts

Heavy hex bolt (8 UN series)ANSI B18.2.1 Bolts, screws, studs

Heavy hex bolt (UNC series)ANSI B18.2.1 Bolts, screws, studs

Heavy hex bolt (UNF series)ANSI B18.2.1 Bolts, screws, studs

Heavy Hex Screw (8 UN series)ANSI B18.2.1 Bolts, screws, studs

Heavy Hex Screw (UNC series)ANSI B18.2.1 Bolts, screws, studs

Heavy Hex Screw (UNF series)ANSI B18.2.1 Bolts, screws, studs

Heavy Hex Structural Bolt (8 UN series)ANSI B18.2.1 Bolts, screws, studs

Heavy Hex Structural Bolt (UNC series)ANSI B18.2.1 Bolts, screws, studs

Heavy Hex Structural Bolt (UNF series)ANSI B18.2.1 Bolts, screws, studs

Hex bolt (8 UN series)ANSI B18.2.1 Bolts, screws, studs

Hex bolt (UNC series)ANSI B18.2.1 Bolts, screws, studs

Hex bolt (UNF series)ANSI B18.2.1 Bolts, screws, studs

Hex cap screw (8 UN series)ANSI B18.2.1 Bolts, screws, studs

Hex cap screw (UNC series)ANSI B18.2.1 Bolts, screws, studs

Hex cap screw (UNF series)ANSI B18.2.1 Bolts, screws, studs

Hex lag screwANSI B18.2.1 Bolts, screws, studs

Square Bolt (8 UN series)ANSI B18.2.1 Bolts, screws, studs

Square Bolt (UNC series)ANSI B18.2.1 Bolts, screws, studs

Square Bolt (UNF series)ANSI B18.2.1 Bolts, screws, studs

Square lag screwANSI B18.2.1 Bolts, screws, studs

Heavy hex flat jam nut (UNC series)ANSI B18.2.2 Nuts

Heavy hex flat nut (UNC series)ANSI B18.2.2 Nuts

Heavy hex jam nut (8 UN series)ANSI B18.2.2 Nuts

Heavy hex jam nut (UNC series)ANSI B18.2.2 Nuts

Heavy hex jam nut (UNF series)ANSI B18.2.2 Nuts

Heavy hex nut (8 UN series)ANSI B18.2.2 Nuts

Heavy hex nut (UNC series)ANSI B18.2.2 Nuts

Heavy hex nut (UNF series)ANSI B18.2.2 Nuts

Heavy hex slotted nut (8 UN series)ANSI B18.2.2 Nuts

Heavy hex slotted nut (UNC series)ANSI B18.2.2 Nuts

Heavy hex slotted nut (UNF series)ANSI B18.2.2 Nuts

Heavy square nut (UNC series)ANSI B18.2.2 Nuts

Hex flat jam nut (UNC series)ANSI B18.2.2 Nuts

Hex flat nut (UNC series)ANSI B18.2.2 Nuts

Hex jam nut (8 UN series)ANSI B18.2.2 Nuts

Hex jam nut (UNC series)ANSI B18.2.2 Nuts

Hex jam nut (UNF series)ANSI B18.2.2 Nuts

Hex nut (8 UN series)ANSI B18.2.2 Nuts

Hex nut (UNC series)ANSI B18.2.2 Nuts

Hex nut (UNF series)ANSI B18.2.2 Nuts

Hex slotted nut (8 UN series)ANSI B18.2.2 Nuts

Hex slotted nut (UNC series)ANSI B18.2.2 Nuts

Hex slotted nut (UNF series)ANSI B18.2.2 Nuts

Hex thick nut (8 UN series)ANSI B18.2.2 Nuts

Hex thick nut (UNC series)ANSI B18.2.2 Nuts

Hex thick nut (UNF series)ANSI B18.2.2 Nuts

Hex thick slotted nut (8 UN series)ANSI B18.2.2 Nuts

Hex thick slotted nut (UNC series)ANSI B18.2.2 Nuts

Hex thick slotted nut (UNF series)ANSI B18.2.2 Nuts

Square nut (UNC series)ANSI B18.2.2 Nuts

@Copyright 09/2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com

/ 599



Hex Cap ScrewANSI B18.2.3.1M Bolts, screws, studs

Formed Hex ScrewANSI B18.2.3.2M Bolts, screws, studs

Formed Hex Screw - Reduced Body DiameterANSI B18.2.3.2M Bolts, screws, studs

Heavy Hex ScrewANSI B18.2.3.3M Bolts, screws, studs

Hex Flange ScrewANSI B18.2.3.4M Bolts, screws, studs

Hex Flange Screw - Reduced Body DiameterANSI B18.2.3.4M Bolts, screws, studs

Hex BoltANSI B18.2.3.5M Bolts, screws, studs

Hex Bolt - Reduced Body DiameterANSI B18.2.3.5M Bolts, screws, studs

Heavy Hex BoltANSI B18.2.3.6M Bolts, screws, studs

Heavy Hex Bolt - Reduced Body DiameterANSI B18.2.3.6M Bolts, screws, studs

Heavy Hex Structural BoltANSI B18.2.3.7M Bolts, screws, studs

Round Head Square Neck BoltANSI B18.2.3.7M Bolts, screws, studs

Round Head Square Neck Bolt - Reduced Body DiameterANSI B18.2.3.7M Bolts, screws, studs

Hex Lag ScrewANSI B18.2.3.8M Bolts, screws, studs

Hex Lag Screw - Reduced Body DiameterANSI B18.2.3.8M Bolts, screws, studs

Heavy Hex Flange ScrewANSI B18.2.3.9M Bolts, screws, studs

Heavy Hex Flange Screw - Reduced Body DiameterANSI B18.2.3.9M Bolts, screws, studs

Hex Nut, Style 1ANSI B18.2.4.1M Nuts

Hex Nut, Style 2ANSI B18.2.4.2M Nuts

Hex Flange NutANSI B18.2.4.4M Nuts

Slotted hex NutANSI B18.2.4.4M Nuts

Hex Jam NutANSI B18.2.4.5M Nuts

Heavy Hex NutANSI B18.2.4.6M Nuts

Type A plain washer (narrow series)ANSI B18.22.1 Washers

Type A plain washer (wide series)ANSI B18.22.1 Washers

Type B plain washer (narrow series)ANSI B18.22.1 Washers

Type B plain washer (regular series)ANSI B18.22.1 Washers

Type B plain washer (wide series)ANSI B18.22.1 Washers

Plain Washer (narrow series)ANSI B18.22M Washers

Plain Washer (regular series)ANSI B18.22M Washers

Plain Washer (Wide series)ANSI B18.22M Washers

Socket Head Cap Screw (Hexagon Socket)ANSI B18.3.1M Bolts, screws, studs

Socket Head Cap Screw (Spline Socket)ANSI B18.3.1M Bolts, screws, studs

Basic retaining rings - Internal series (3BM1)ANSI B27.7-1977 Rings, bushes, sleeves, collars

E-Ring retaining rings - External (3CM1)ANSI B27.7-1977 Rings, bushes, sleeves, collars

Basic retaining rings - External series (3AM1)ANSI B27.7M-1977 Rings, bushes, sleeves, collars

C-Ring retaining rings - External (3FM1)ANSI B27.8M-1978 Rings, bushes, sleeves, collars

Heavy-Duty retaining rings - External (3DM1)ANSI B27.8M-1978 Rings, bushes, sleeves, collars

Reinforced E-Ring retaining rings - External (3EM1)ANSI B27.8M-1978 Rings, bushes, sleeves, collars

Butt welding 180° short radius elbow - Double Extra Strong (X.X.S.)ASME B 16.28-1994 Elbows

Butt welding 180° short radius elbow - Extra Strong (X.S)ASME B 16.28-1994 Elbows

Butt welding 180° short radius elbow - Schedule 10 (SCH 10)ASME B 16.28-1994 Elbows









/ 599





Butt welding 180° short radius elbow - Stainless steel (SCH 10S)ASME B 16.28-1994 Elbows




Butt welding 180° short radius elbow - Standard (STD)ASME B 16.28-1994 Elbows

Butt welding 90° short radius elbow - Double Extra Strong (X.X.S.)ASME B 16.28-1994 Elbows

Butt welding 90° short radius elbow - Extra Strong (X.S.)ASME B 16.28-1994 Elbows















Butt welding 90° short radius elbow - Standard (STD)ASME B 16.28-1994 Elbows

Class 1500 flanges - NPS 1 to 24 - Orifice welding neckASME B 16.36 - 1996 Flanges


Class 300 flanges - NPS 1 to 24 - Orifice slip onASME B 16.36 - 1996 Flanges


Class 300 flanges - NPS 1 to 8 - Orifice threadedASME B 16.36 - 1996 Flanges

Class 400 flanges - NPS 1 to 24 -Orifice welding neckASME B 16.36 - 1996 Flanges



Class 1500 flanges - NPS 1 to 24 - Orifice welding neckASME B 16.36 - 1996 Weld-on neck flanges



Class 400 flanges - NPS 1 to 24 -Orifice welding neckASME B 16.36 - 1996 Weld-on neck flanges



Class 300 flanges - NPS 1 to 8 - Orifice threadedASME B 16.36 - 1996 Weld-on or threaded hubbed neck flanges

Class 300 flanges - NPS 1 to 24 - Orifice slip onASME B 16.36 - 1996 Weld-on plain flanges

Class 150 flanges - NPS 26 to 60 - Blind - serie AASME B 16.47 - 1996 - Serie A

Blind flanges


Blind flanges


Blind flanges


Blind flanges


Flanges

Class 150 flanges - NPS 26 to 60 - Welding neck - serie AASME B 16.47 - 1996 - Serie A

Flanges


Flanges


Flanges


/ 599




Flanges


Flanges


Flanges


Flanges


Flanges


Weld-on neck flanges









Class 400 flanges - NPS 26 to 60 - BlindASME B 16.47 - 1996 - Série A

Blind flanges

Class 400 flanges - NPS 26 to 60 - BlindASME B 16.47 - 1996 - Série A

Flanges

Class 150 flanges - NPS 26 to 60 - Blind - serie BASME B 16.47 - 1996 - Serie B

Blind flanges


Blind flanges


Blind flanges


Blind flanges


Blind flanges


Flanges

Class 150 flanges - NPS 26 to 60 - Welding neck - serie BASME B 16.47 - 1996 - Serie B

Flanges


Flanges


Flanges


Flanges


Flanges


Flanges


Flanges


Flanges









Class 150 flanges - NPS 1/2 to 24 - BlindASME B 16.5 - 1996 Blind flanges




Class 400 flanges - NPS 4 to 24 - BlindASME B 16.5 - 1996 Blind flanges



/ 599



Class 900 flanges - NPS 3 to 24 - BlindASME B 16.5 - 1996 Blind flanges

Class 150 flanges - lappedASME B 16.5 - 1996 Flanges

Class 150 flanges - NPS 1/2 to 24 - BlindASME B 16.5 - 1996 Flanges

Class 150 flanges - NPS 1/2 to 24 - Long welding neckASME B 16.5 - 1996 Flanges

Class 150 flanges - NPS 1/2 to 24 - Slip onASME B 16.5 - 1996 Flanges

Class 150 flanges - NPS 1/2 to 24 - ThreadedASME B 16.5 - 1996 Flanges

Class 150 flanges - NPS 1/2 to 24 - Welding neckASME B 16.5 - 1996 Flanges

Class 150 flanges - NPS 1/2 to 3 - Socket weldingASME B 16.5 - 1996 Flanges

Class 1500 flanges - NPS 1/2 to 2 1/2 - Socket weldingASME B 16.5 - 1996 Flanges

Class 1500 flanges - NPS 1/2 to 2 1/2 - ThreadedASME B 16.5 - 1996 Flanges


Class 1500 flanges - NPS 1/2 to 24 - LappedASME B 16.5 - 1996 Flanges




Class 2500 flanges - NPS 1/2 to 12 - ThreadedASME B 16.5 - 1996 Flanges










Class 300 flanges -NPS 1/2 to 24 - ThreadedASME B 16.5 - 1996 Flanges

Class 400 flanges - NPS 4 to 24 - BlindASME B 16.5 - 1996 Flanges

Class 400 flanges - NPS 4 to 24 - lappedASME B 16.5 - 1996 Flanges

Class 400 flanges - NPS 4 to 24 - Slip onASME B 16.5 - 1996 Flanges

Class 400 flanges - NPS 4 to 24 - Welding neckASME B 16.5 - 1996 Flanges



Class 600 flanges - NPS 1/2 to 24 - lappedASME B 16.5 - 1996 Flanges




Class 600 flanges - NPS 3 to 24 - lappedASME B 16.5 - 1996 Flanges




Class 900 flanges - NPS 3 to 24 - BlindASME B 16.5 - 1996 Flanges

Class 900 flanges - NPS 3 to 24 - Slip onASME B 16.5 - 1996 Flanges


Class 150 flanges - lappedASME B 16.5 - 1996 Losse plain flanges

Class 150 flanges - NPS 1/2 to 24 - Slip onASME B 16.5 - 1996 Losse plain flanges

Class 1500 flanges - NPS 1/2 to 24 - LappedASME B 16.5 - 1996 Losse plain flanges





Class 400 flanges - NPS 4 to 24 - lappedASME B 16.5 - 1996 Losse plain flanges

Class 400 flanges - NPS 4 to 24 - Slip onASME B 16.5 - 1996 Losse plain flanges


/ 599



Class 600 flanges - NPS 1/2 to 24 - lappedASME B 16.5 - 1996 Losse plain flanges


Class 600 flanges - NPS 3 to 24 - lappedASME B 16.5 - 1996 Losse plain flanges

Class 900 flanges - NPS 3 to 24 - Slip onASME B 16.5 - 1996 Losse plain flanges

Class 150 flanges - NPS 1/2 to 24 - Long welding neckASME B 16.5 - 1996 Weld-on neck flanges

Class 150 flanges - NPS 1/2 to 24 - Welding neckASME B 16.5 - 1996 Weld-on neck flanges





Class 400 flanges - NPS 4 to 24 - Welding neckASME B 16.5 - 1996 Weld-on neck flanges





Class 150 flanges - NPS 1/2 to 24 - ThreadedASME B 16.5 - 1996 Weld-on or threaded hubbed neck flanges

Class 150 flanges - NPS 1/2 to 3 - Socket weldingASME B 16.5 - 1996 Weld-on or threaded hubbed neck flanges

Class 1500 flanges - NPS 1/2 to 2 1/2 - Socket weldingASME B 16.5 - 1996 Weld-on or threaded hubbed neck flanges

Class 1500 flanges - NPS 1/2 to 2 1/2 - ThreadedASME B 16.5 - 1996 Weld-on or threaded hubbed neck flanges

Class 2500 flanges - NPS 1/2 to 12 - ThreadedASME B 16.5 - 1996 Weld-on or threaded hubbed neck flanges



Class 300 flanges -NPS 1/2 to 24 - ThreadedASME B 16.5 - 1996 Weld-on or threaded hubbed neck flanges




Class 150 flanges - NPS 1/2 to 24 - Slip onASME B 16.5 - 1996 Weld-on plain flanges



Class 400 flanges - NPS 4 to 24 - Slip onASME B 16.5 - 1996 Weld-on plain flanges


Class 900 flanges - NPS 3 to 24 - Slip onASME B 16.5 - 1996 Weld-on plain flanges

Butt welding cap - Double Extra Strong (X.X.S.)ASME B 16.9-1993 Caps

Butt welding cap - Double Extra Strong (X.X.S.)ASME B 16.9-1993 Caps

Butt welding cap - Extra Strong (X.S.)ASME B 16.9-1993 Caps

Butt welding cap - Extra Strong (X.S.)ASME B 16.9-1993 Caps

Butt welding cap - Schedule 100 (SCH 100)ASME B 16.9-1993 Caps












/ 599




Butt welding cap - Schedule 40 (SCH40)ASME B 16.9-1993 Caps

Butt welding cap - Schedule 40 (SCH40)ASME B 16.9-1993 Caps





Butt welding cap - Schedule10 (SCH 10)ASME B 16.9-1993 Caps

Butt welding cap - Schedule10 (SCH 10)ASME B 16.9-1993 Caps

Butt welding cap - Stainless steel (SCH 10S)ASME B 16.9-1993 Caps








Butt welding cap - Standard (STD)ASME B 16.9-1993 Caps

Butt welding cap - Standard (STD)ASME B 16.9-1993 Caps

Butt welding 180° long radius elbow - Double Extra Strong (X.X.S.)ASME B 16.9-1993 Elbows

Butt welding 180° long radius elbow - Extra Strong (X.S.)ASME B 16.9-1993 Elbows

Butt welding 180° long radius elbow - Schedule 10 (SCH 10)ASME B 16.9-1993 Elbows

Butt welding 180° long radius elbow - Schedule 100 (SCH100)ASME B 16.9-1993 Elbows









Butt welding 180° long radius elbow - Stainless steel (SCH 10S)ASME B 16.9-1993 Elbows




Butt welding 180° long radius elbow - Standard (STD)ASME B 16.9-1993 Elbows


















/ 599





















Butt welding concentric reducer - Double Extra Strong (X.X.S.)ASME B 16.9-1993 Reducers

Butt welding concentric reducer - Extra Strong (X.S.)ASME B 16.9-1993 Reducers

Butt welding concentric reducer - Schedule 10 (SCH 10)ASME B 16.9-1993 Reducers










Butt welding concentric reducer - Stainless steel (SCH 10S)ASME B 16.9-1993 Reducers




Butt welding concentric reducer - Standard (STD)ASME B 16.9-1993 Reducers

Butt welding reducing outlet tee - Double Extra Strong (X.X.S.)ASME B 16.9-1993 Tees

Butt welding reducing outlet tee - Extra Strong (X.S.)ASME B 16.9-1993 Tees

Butt welding reducing outlet tee - Schedule 10 (SCH 10)ASME B 16.9-1993 Tees










Butt welding reducing outlet tee - Stainless steel (SCH 10S)ASME B 16.9-1993 Tees




Butt welding reducing outlet tee - Standard (STD)ASME B 16.9-1993 Tees


/ 599



Butt welding straight tee - Double Extra Strong (X.X.S.)ASME B 16.9-1993 Tees

Butt welding straight tee - Extra Strong (X.S.)ASME B 16.9-1993 Tees

Butt welding straight tee - Schedule 10 (SCH 10)ASME B 16.9-1993 Tees










Butt welding straight tee - Stainless steel (SCH 10S)ASME B 16.9-1993 Tees




Butt welding straight tee - Standard (STD)ASME B 16.9-1993 Tees

Steel pipeASME B 36.10 M - 1996 Pipeline components and pipelines in general

Countersunk External Tooth-Lock Washers - Type AASME B18.21.1-1999 Washers

Countersunk External Tooth-Lock Washers - Type BASME B18.21.1-1999 Washers

External Tooth-Lock Washers - Type AASME B18.21.1-1999 Washers

External Tooth-Lock Washers - Type BASME B18.21.1-1999 Washers

Extra-Duty Helical Spring-Lock WashersASME B18.21.1-1999 Washers

Heavy Helical Spring-Lock WashersASME B18.21.1-1999 Washers

Heavy Internal Tooth-Lock Washers - Type AASME B18.21.1-1999 Washers

Heavy Internal Tooth-Lock Washers - Type BASME B18.21.1-1999 Washers

High-Collar Helical Spring-Lock WashersASME B18.21.1-1999 Washers

Internal Tooth-Lock Washers - Type AASME B18.21.1-1999 Washers

Internal Tooth-Lock Washers - Type BASME B18.21.1-1999 Washers

Internal/External Tooth-Lock Washers - Type AASME B18.21.1-1999 Washers

Internal/External Tooth-Lock Washers - Type BASME B18.21.1-1999 Washers

Regular Helical Spring-Lock WashersASME B18.21.1-1999 Washers

Drilled Hexagon Socket Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Drilled Hexagon Socket Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Button Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Button Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Flat Countersunk Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Flat Countersunk Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Head Shoulder ScrewsASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Cone Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Cone Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Cup Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Cup Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Flat Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Flat Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Half Dog Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Half Dog Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Oval Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Hexagon Socket Set Screws - Oval Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Low Head Hexagon Socket Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs


/ 599



Low Head Hexagon Socket Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Button Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Button Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Flat Countersunk Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Flat Countersunk Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Head Cap Screws - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Head Cap Screws - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Cone Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Cone Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Cup Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Cup Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Flat Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Flat Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Half Dog Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Half Dog Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Oval Point - Coarse UNCASME B18.3-2003 Bolts, screws, studs

Spline Socket Set Screws - Oval Point - Fine UNFASME B18.3-2003 Bolts, screws, studs

114 deg countersunk square neck bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Flat countersunk head elevator bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Round head bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Round head fin neck bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Round head ribbed neck bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Round head short square neck bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Round head square neck bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Slotted countersunk bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Step bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

T-head bolts (inch series)ASME B18.5-1990 Bolts, screws, studs

Combination Slotted - Type 1 Cross Recessed Indented Hex Washer Head Machine Screws - Coarse UNC

ASME B18.6.3-2003 Bolts, screws, studs

Combination Slotted - Type 1 Cross Recessed Indented Hex Washer Head Machine Screws - Fine UNF


Combination Slotted - Type 1 Cross Recessed Pan Head Machine Screws - Coarse UNC


Combination Slotted - Type 1 Cross Recessed Pan Head Machine Screws - Fine UNF


Combination Slotted - Type 1 Cross Recessed Round Head Machine Screws - Coarse UNC


Combination Slotted - Type 1 Cross Recessed Round Head Machine Screws - Fine UNF


Combination Slotted - Type 1 Cross Recessed Truss Head Machine Screws - Coarse UNC


Combination Slotted - Type 1 Cross Recessed Truss Head Machine Screws - Fine UNF


Combination Slotted - Type 1A Cross Recessed Pan Head Machine Screws - Coarse UNC


Combination Slotted - Type 1A Cross Recessed Pan Head Machine Screws - Fine UNF


Combination Slotted - Type 1A Cross Recessed Round Head Machine Screws - Coarse UNC


Combination Slotted - Type 1A Cross Recessed Round Head Machine Screws - Fine UNF


Combination Slotted - Type 3 Square Recessed Pan Head Machine Screws - Coarse UNC


Combination Slotted - Type 3 Square Recessed Pan Head Machine Screws - Fine UNF


Combination Slotted - Type 3 Square Recessed Truss Head Machine Screws - Coarse UNC


Combination Slotted - Type 3 Square Recessed Truss Head Machine Screws - Fine UNF


Plain and Slotted Hex Washer Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs


/ 599



Plain and Slotted Hex Washer Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Plain and Slotted Large Hex Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Plain and Slotted Large Hex Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Plain and Slotted Regular Hex Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Plain and Slotted Regular Hex Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted 100 deg Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted 100 deg Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Binding Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Binding Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Slotted Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Slotted Drilled Fillister Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Drilled Fillister Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Fillister Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Fillister Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Oval Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Oval Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Pan Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Pan Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Round Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Round Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Round Washer Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Round Washer Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Truss Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Truss Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Undercut Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Undercut Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Slotted Undercut Oval Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Slotted Undercut Oval Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Type 1 Cross Recessed 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Type 1 Cross Recessed Binding Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Binding Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Type 1 Cross Recessed Fillister Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Fillister Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Flat Countersunk Trim Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Flat Countersunk Trim Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Indented Hex Washer Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Indented Hex Washer Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Indented Large Hex Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Indented Large Hex Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Indented Regular Hex Head Machine Screws - Coarse UNC



/ 599



Type 1 Cross Recessed Indented Regular Hex Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Non-Indented Large Hex Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Non-Indented Large Hex Head Machine Screws - Fine UNF


Type 1 Cross Recessed Non-Indented Regular Hex Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Non-Indented Regular Hex Head Machine Screws - Fine UNF


Type 1 Cross Recessed Oval Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Oval Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Oval Countersunk Trim Head Machine Screws - Long Screws - Coarse UNC


Type 1 Cross Recessed Oval Countersunk Trim Head Machine Screws - Long screws - Fine UNF


Type 1 Cross Recessed Oval Countersunk Trim Head Machine Screws - Short Screws - Coarse UNC


Type 1 Cross Recessed Oval Countersunk Trim Head Machine Screws - Short Screws - Fine UNF


Type 1 Cross Recessed Pan Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Pan Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Round Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Round Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Round Washer Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Round Washer Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Truss Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Truss Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1 Cross Recessed Undercut Flat Countersunk Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Undercut Flat Countersunk Head Machine Screws - Fine UNF


Type 1 Cross Recessed Undercut Oval Countersunk Head Machine Screws - Coarse UNC


Type 1 Cross Recessed Undercut Oval Countersunk Head Machine Screws - Fine UNF


Type 1A Cross Recessed 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Type 1A Cross Recessed 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Type 1A Cross Recessed Binding Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Binding Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Type 1A Cross Recessed Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Type 1A Cross Recessed Fillister Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Fillister Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Flat Countersunk Trim Head Machine Screws - Coarse UNC


Type 1A Cross Recessed Flat Countersunk Trim Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Oval Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Oval Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Oval Countersunk Trim Head Machine Screws - Long Screws - Coarse UNC


Type 1A Cross Recessed Oval Countersunk Trim Head Machine Screws - Long Screws - Fine UNF


Type 1A Cross Recessed Oval Countersunk Trim Head Machine Screws - Short Screws - Coarse UNC


Type 1A Cross Recessed Oval Countersunk Trim Head Machine Screws - Short Screws - Fine UNF



/ 599



Type 1A Cross Recessed Pan Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Pan Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Round Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Round Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Truss Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Truss Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 1A Cross Recessed Undercut Flat Countersunk Head Machine Screws - Coarse UNC


Type 1A Cross Recessed Undercut Flat Countersunk Head Machine Screws - Fine UNF


Type 1A Cross Recessed Undercut Oval Countersunk Head Machine Screws - Coarse UNC


Type 1A Cross Recessed Undercut Oval Countersunk Head Machine Screws - Fine UNF


Type 2 Cross Recessed 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Type 2 Cross Recessed 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Type 2 Cross Recessed Binding Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Binding Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Coarse UNC


Type 2 Cross Recessed Close Tolerance 100 deg Flat Countersunk Head Machine Screws - Fine UNF


Type 2 Cross Recessed Fillister Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Fillister Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Flat Countersunk Trim Head Machine Screws - Coarse UNC


Type 2 Cross Recessed Flat Countersunk Trim Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Oval Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Oval Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Oval Countersunk Trim Head Machine Screws - Coarse UNC


Type 2 Cross Recessed Oval Countersunk Trim Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Pan Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Pan Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Round Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Round Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Truss Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Truss Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 2 Cross Recessed Undercut Flat Countersunk Head Machine Screws - Coarse UNC


Type 2 Cross Recessed Undercut Flat Countersunk Head Machine Screws - Fine UNF


Type 2 Cross Recessed Undercut Oval Countersunk Head Machine Screws - Coarse UNC


Type 2 Cross Recessed Undercut Oval Countersunk Head Machine Screws - Fine UNF


Type 3 Square Recessed Binder Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Binder Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Fillister Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Fillister Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Flat Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Flat Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Oval Countersunk Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Oval Countersunk Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Pan Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs


/ 599



Type 3 Square Recessed Pan Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Round Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Round Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Truss Head Machine Screws - Coarse UNCASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Truss Head Machine Screws - Fine UNFASME B18.6.3-2003 Bolts, screws, studs

Type 3 Square Recessed Undercut Flat Countersunk Head Machine Screws - Coarse UNC


Type 3 Square Recessed Undercut Flat Countersunk Head Machine Screws - Fine UNF


Type 3 Square Recessed Undercut Oval Countersunk Head Machine Screws - Coarse UNC


Type 3 Square Recessed Undercut Oval Countersunk Head Machine Screws - Fine UNF


Hex Machine Screw Nuts - Coarse UNCASME B18.6.3-2003 Nuts

Hex Machine Screw Nuts - Fine UNFASME B18.6.3-2003 Nuts

Square Machine Screw Nuts - Coarse UNCASME B18.6.3-2003 Nuts

Square Machine Screw Nuts - Fine UNFASME B18.6.3-2003 Nuts

Clevis pins (inch series)ASME B18.8.1-1994 Pins, nails

Cotter pins (inch series)ASME B18.8.1-1994 Pins, nails

Chamfered Straight PinsASME B18.8.2-2000 Pins, nails

Coiled-Type spring pins - Heavy DutyASME B18.8.2-2000 Pins, nails

Coiled-Type spring pins - Light DutyASME B18.8.2-2000 Pins, nails

Coiled-Type spring pins - Standard DutyASME B18.8.2-2000 Pins, nails

Grooved Pins made from corrosion resistant steel and monel (type A)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from corrosion resistant steel and monel (type E)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from corrosion resistant steel and monel (type F)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from corrosion resistant steel and monel (type G)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from corrosion resistant steel and monel (type H)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from low carbon or alloy steel (type A)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from low carbon or alloy steel (type E)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from low carbon or alloy steel (type F)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from low carbon or alloy steel (type G)ASME B18.8.2-2000 Pins, nails

Grooved Pins made from low carbon or alloy steel (type H)ASME B18.8.2-2000 Pins, nails

Grooved T-head cotter pinsASME B18.8.2-2000 Pins, nails

Hardened Ground Machine Dowel Pins - Oversize Series PinsASME B18.8.2-2000 Pins, nails

Hardened Ground Machine Dowel Pins - Standard Series PinsASME B18.8.2-2000 Pins, nails

Hardened Ground Production Dowel PinsASME B18.8.2-2000 Pins, nails

Round-Head grooved drive studsASME B18.8.2-2000 Pins, nails

Slotted-type spring pins - Style 1ASME B18.8.2-2000 Pins, nails

Slotted-type spring pins - Style 2ASME B18.8.2-2000 Pins, nails

Square End Straight PinsASME B18.8.2-2000 Pins, nails

Taper Pins - Commercial ClassASME B18.8.2-2000 Pins, nails

Taper Pins - Precision ClassASME B18.8.2-2000 Pins, nails

Unhardened Ground Dowel PinsASME B18.8.2-2000 Pins, nails

Roller chain - Double strandASME B29.100-2002 Chain drives and their components

Roller chain - Double strand (inch series)ASME B29.100-2002 Chain drives and their components

Roller chain - Quadruple strandASME B29.100-2002 Chain drives and their components

Roller chain - Quadruple strand (inch series)ASME B29.100-2002 Chain drives and their components

Roller chain - Single strandASME B29.100-2002 Chain drives and their components

Roller chain - Single strand (inch series)ASME B29.100-2002 Chain drives and their components

Roller chain - Triple strandASME B29.100-2002 Chain drives and their components


/ 599



Roller chain - Triple strand (inch series)ASME B29.100-2002 Chain drives and their components

Sprockets - Double strandASME B29.100-2002 Chain drives and their components

Sprockets - Double strand (inch series)ASME B29.100-2002 Chain drives and their components

Sprockets - Quadruple strandASME B29.100-2002 Chain drives and their components

Sprockets - Quadruple strand (inch series)ASME B29.100-2002 Chain drives and their components

Sprockets - Single strandASME B29.100-2002 Chain drives and their components

Sprockets - Single strand (inch series)ASME B29.100-2002 Chain drives and their components

Sprockets - Triple strandASME B29.100-2002 Chain drives and their components

Sprockets - Triple strand (inch series)ASME B29.100-2002 Chain drives and their components

Head-Type liner bushings (type HL)ASME B94.33-1996 Bushes

Head-Type press fit bushings (type H)ASME B94.33-1996 Bushes

Lock Screw for use with Slip-Fixed renewable bushingsASME B94.33-1996 Bushes

Plain-Type liner bushings (type L)ASME B94.33-1996 Bushes

Plain-Type press fit bushings (type P)ASME B94.33-1996 Bushes

Round Clamp for optional use with Fixed Side of Slip-Fixed renewable bushingsASME B94.33-1996 Bushes

Slip-Fixed-Type renewable bushings (type SF)ASME B94.33-1996 Bushes

Class 150 flanges - NPS 26 to 48 - Slip onBS 3293 - 1960 Flanges

Class 150 flanges - NPS 26 to 48 - Welding neckBS 3293 - 1960 Flanges







Class 150 flanges - NPS 26 to 48 - Slip onBS 3293 - 1960 Losse plain flanges




Class 150 flanges - NPS 26 to 48 - Welding neckBS 3293 - 1960 Weld-on neck flanges




Class 150 flanges - NPS 26 to 48 - Slip onBS 3293 - 1960 Weld-on plain flanges




External circlipBS 3673 Rings, bushes, sleeves, collars

Internal circlipBS 3673 Rings, bushes, sleeves, collars

Hexagon castle nut - Symbol HKBS 3692 Nuts

Hexagon slotted nut - Symbol HKBS 3692 Nuts

Hexagon head bolt BS 3692 : 2001 Bolts, screws, studs

Hexagon head bolt with rounded endBS 3692 : 2001 Bolts, screws, studs

Hexagon head bolt with washer faceBS 3692 : 2001 Bolts, screws, studs

Hexagon head bolt with washer face, with rounded endBS 3692 : 2001 Bolts, screws, studs

Hexagon head screw BS 3692 : 2001 Bolts, screws, studs

Hexagon head screw with washer faceBS 3692 : 2001 Bolts, screws, studs

Hexagon head screw with washer face, rounded endBS 3692 : 2001 Bolts, screws, studs


/ 599



Hexagon head screw, rounded end BS 3692 : 2001 Bolts, screws, studs

Castle nut (6 slots)BS 3692 : 2001 Nuts

Castle nut (8 slots)BS 3692 : 2001 Nuts

Hexagon nutBS 3692 : 2001 Nuts

Hexagon thin nutBS 3692 : 2001 Nuts

Slotted nut (6 slots)BS 3692 : 2001 Nuts

Bulb flatBS 4 Profiles

Channel BS Steel SectionBS 4 Profiles

Joist with 5 degree taper flangesBS 4 Profiles

Rolled long stalk T-BarBS 4 Profiles

Rolled short stalk T-BarBS 4 Profiles

T-Bar cut from universal beamBS 4 Profiles

T-Bar cut from universal columnBS 4 Profiles

Universal Beam BS Steel SectionBS 4 Profiles

Universal Bearing Pile BS Steel SectionBS 4 Profiles

Universal Column BS Steel SectionBS 4 Profiles

Hexagon machine screw nutBS 4183 Nuts

Square machine screw nutBS 4183 Nuts

Whitney form woodruff key - series 1BS 4235 Part 2 Keys and keyways, splines

Whitney form woodruff key - series 2BS 4235 Part 2 Keys and keyways, splines

Woodruff key - series 1BS 4235 Part 2 Keys and keyways, splines

Woodruff key - series 2BS 4235 Part 2 Keys and keyways, splines

Lifting eye boltBS 4278 Accessories for lifting equipment

Bright metal washer - Forms A to GBS 4320 Washers

High strength friction grip nutBS 4395 Part 2 Nuts

3° square taper washerBS 4395 Part 2 Washers



Spring washer - B serieBS 4464 Washers

Spring washer - BP serieBS 4464 Washers

Spring washer - Normal serieBS 4464 Washers

Bronze oil-retaining bushBS 4480 Part 1 Plain bearings

Flanged bronze oil-retaining bushBS 4480 Part 1 Plain bearings

Equal angle steel sectionBS 4848 Profiles

Unequal angle steel sectionBS 4848 Profiles

Circular hollow sectionBS 4848 Tubes

Rectangular hollow sectionBS 4848 Tubes

Hexagon nut, style 1 - Grades A and B - Symbol HBS EN 24032 Nuts

Hexagon nut, style 2 - Grades A and BBS EN 24033 Nuts

Hexagon nut, style 1 - Grade C - Symbol HBS EN 24034 Nuts

Hexagon thin nut - Grades A and B - Symbol HMBS EN 24035 Nuts

Hexagon thin nut - unchamfered - Grade B - Symbol HMBS EN 24036 Nuts

Hexagon nut, style 1 - fine metric pitch - Grades A and B - Symbol HBS EN 28673 Nuts

Hexagon nut, style 2 - fine metric pitch - Grades A and BBS EN 28674 Nuts

Hexagon thin nut - fine metric pitch - Grades A and B - Symbol HMBS EN 28675 Nuts

Taper pinDIN 1 Pins, nails

HEA DIN Steel SectionDIN 1025 Profiles

HEAA DIN Steel SectionDIN 1025 Profiles

HEB DIN Steel SectionDIN 1025 Profiles

HEM DIN Steel SectionDIN 1025 Profiles


/ 599



IPE DIN Steel SectionDIN 1025 Profiles

IPEA DIN Steel SectionDIN 1025 Profiles

IPEO DIN Steel SectionDIN 1025 Profiles

IPER DIN Steel SectionDIN 1025 Profiles

IPEV DIN Steel SectionDIN 1025 Profiles

U DIN Steel SectionDIN 1026 Profiles

UPN DIN Steel SectionDIN 1026 Profiles

L DIN Steel SectionDIN 1028 Profiles

Spring cottersDIN 11024 Compression springs

Spring cottersDIN 11024 Rings, bushes, sleeves, collars

Round plain head nails for use in automatic nailling machinesDIN 1143 Pins, nails

Decorator's tacksDIN 1157 Pins, nails

Wall hooksDIN 1158 Pins, nails

Moulding nailsDIN 1163 Pins, nails

Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

DIN 124 Rivets

Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

DIN 124 Rivets

Washer (without internal chamfer) - Product Grade ADIN 125-1 Washers

Washer (with internal chamfer) - Product Grade ADIN 125-2 Washers

Washer - Product Grade CDIN 126 Washers

Spring washer - Normal seriesDIN 127 Washers

Curved spring lock washersDIN 128 Washers

Wave spring washersDIN 137 Washers

Washers type coarse for boltsDIN 1441 Washers

Clevis pins with head and stud endDIN 1445 Pins, nails

Grooved pins, half length grooved with gorge - Type A with slot for retaining rings

DIN 1469 Pins, nails

Grooved pins, half length grooved with gorge - Type B with slot for retaining washers

DIN 1469 Pins, nails

Grooved pins, half length grooved with gorge - Type C with rounded slotDIN 1469 Pins, nails

Turnbuckle nuts made from hexagon barDIN 1479 Nuts

Turnbuckle nutDIN 1480 Accessories for lifting equipment

Turnbuckle nut - weldable endsDIN 1480 Accessories for lifting equipment

Turnbuckle nutDIN 1480 Nuts

Turnbuckle nut - weldable endsDIN 1480 Nuts

Turnbuckles made from steel tube or round steel barDIN 1480 Nuts

Hexagon domed cap nutDIN 1587 Nuts

Accessories for the installation of gypsum plasterboardDIN 18182 Pins, nails

T-head bolts with square neckDIN 186 Bolts, screws, studs

T-head bolts with double nibDIN 188 Bolts, screws, studs

Triangular nuts for use with electrical equipment in miningDIN 22 425 Nuts

Double end studsDIN 2509 Bolts, screws, studs

Hexagon nuts for use with bolts with waisted shank - Type NF regular patternDIN 2510-5 Nuts

Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring

DIN 2510-5 Nuts

Cap nuts for use with bolts with waisted shank - Type AF regular patternDIN 2510-6 Nuts

Cap nuts for use with bolts with waisted shank - Type BF for internal centringDIN 2510-6 Nuts

Sleeves for use with bolts with waisted shank - Type D for centring by the nutDIN 2510-7 Spacers

Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread

DIN 2510-7 Spacers

Blind flange - PN 10DIN 2527 Blind flanges




/ 599







Blind flange - PN 10DIN 2527 Flanges







Oval flange, with neck threaded - PN 6DIN 2558 Flanges

Oval flange, with neck threaded - PN 6DIN 2558 Plain or threaded plain oval flanges

Oval flange, with neck threaded - PN 10 and PN 16DIN 2561 Flanges

Oval flange, with neck threaded - PN 10 and PN 16DIN 2561 Plain or threaded plain oval flanges

Threaded flange with neck - PN 10 and PN 16DIN 2566 Flanges

Threaded flange with neck - PN 10 and PN 16DIN 2566 Weld-on or threaded hubbed neck flanges

Welding neck flange - PN 6DIN 2573 Flanges

Welding neck flange - PN 6DIN 2573 Weld-on plain flanges

Flat flange for welding - PN 10DIN 2576 Flanges

Flat flange for welding - PN 10DIN 2576 Weld-on plain flanges

Taper pins with thread ends and constant taper lengthsDIN 258 Pins, nails

T-head boltsDIN 261 Bolts, screws, studs


Welding neck flange - PN 400DIN 2627 Weld-on neck flanges


Blind flange - PN 250 - Form ADIN 2628 Blind flanges

Blind flange - PN 250 - Form BDIN 2628 Blind flanges







Welding neck flange - PN 1 and PN 2.5DIN 2630 Flanges

Welding neck flange - PN 1 and PN 2.5DIN 2630 Weld-on neck flanges

Welding neck flange - PN6DIN 2631 Flanges

Welding neck flange - PN6DIN 2631 Weld-on neck flanges















/ 599




Lapped flange - PN 6DIN 2641 Flanges

Lapped flange - PN 6DIN 2641 Losse plain flanges

Weld-on plate collar PN 6DIN 2641 Weld-on plain collar







Lose flange and ring with neck for welding - PN 10DIN 2673 Flanges

Lose flange and ring with neck for welding - PN 10DIN 2673 Losse plain flanges

Lose flange and ring with neck for welding - PN 10DIN 2673 Weld-neck collars

Tangential keys and tangential keyways for alternating shock loadsDIN 268 Keys and keyways, splines

Tangential keys and tangential keyways for constant loadsDIN 271 Keys and keyways, splines

Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

DIN 302 Rivets

Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

DIN 302 Rivets

Wing nutDIN 315 Nuts

Wing screwsDIN 316 Bolts, screws, studs

Slotted capstan screwDIN 404 Bolts, screws, studs

Slotted headless screw with chamfered endDIN 427 Bolts, screws, studs

Pipe nutsDIN 431 Nuts

External tab washersDIN 432 Washers

Product grade A washers, Part 1DIN 433 Washers

Product grade A washers, Part 2DIN 433 Washers

Square taper washer (for U sections)DIN 434 Washers

Square taper washer (for I sections)DIN 435 Washers

Square washer (for timber construction) - Grade CDIN 436 Washers

Washer type R (for timber construction) - Grade CDIN 440 Washers

Washer type V (for timber construction) - Grade CDIN 440 Washers

EyeboltsDIN 444 Bolts, screws, studs

Tab washers with long and short tab at right anglesDIN 463 Washers

Knurled thumb screwsDIN 464 Bolts, screws, studs

Knurled nuts with collarDIN 466 Nuts

Knurled nutDIN 467 Nuts

Circlips (retaining rings) for shafts - Heavy typeDIN 471 Rings, bushes, sleeves, collars

Circlips (retaining rings) for shafts - Normal typeDIN 471 Rings, bushes, sleeves, collars

Circlips (retaining rings) for bores - Heavy typeDIN 472 Rings, bushes, sleeves, collars

Circlips (retaining rings) for bores - Normal typeDIN 472 Rings, bushes, sleeves, collars

Square head bolt with colarDIN 478 Bolts, screws, studs

Square head bolt with colarDIN 479 Bolts, screws, studs

Square head bolt with colar and oval half dog pointDIN 480 Bolts, screws, studs

Weld studsDIN 525 Bolts, screws, studs

Safety cups for cheese head screws according to DIN 84DIN 526 Washers

Masonry and foundation bolts - Type ADIN 529 Bolts, screws, studs

Masonry and foundation bolts - Type BDIN 529 Bolts, screws, studs

Masonry and foundation bolts - Type CDIN 529 Bolts, screws, studs

Masonry and foundation bolts - Type DDIN 529 Bolts, screws, studs


/ 599



Masonry and foundation bolts - Type EDIN 529 Bolts, screws, studs

Masonry and foundation bolts - Type FDIN 529 Bolts, screws, studs

Masonry and foundation bolts - Type GDIN 529 Bolts, screws, studs

Slotted round nutsDIN 546 Nuts

Round nuts with drilled holes in one faceDIN 547 Nuts

Round nuts with set pin holes in sideDIN 548 Nuts

Square nutDIN 557 Nuts

Hexagon head screw - Fine thread - Long dog pointDIN 561 Bolts, screws, studs

Hexagon head screw - Large thread - Long dog pointDIN 561 Bolts, screws, studs

Square thin nutDIN 562 Nuts

Hexagon set screw with small hexagon, half dog point and flat cone pointDIN 564 Bolts, screws, studs

Hexagon head wood screwsDIN 571 Bolts, screws, studs

Lifting eye boltDIN 580 Accessories for lifting equipment

Lifting eye boltDIN 580 Bolts, screws, studs

Lifting eye nutDIN 582 Accessories for lifting equipment

Lifting eye nutDIN 582 Nuts

Mushroom head square neck boltDIN 603 Bolts, screws, studs

Flat countersunk nib boltDIN 604 Bolts, screws, studs

Flat coutersunk square neck bolt with long squareDIN 605 Bolts, screws, studs

Cup head nib boltDIN 607 Bolts, screws, studs

Flat coutersunk square neck bolt with long squareDIN 608 Bolts, screws, studs

Hexagon fit boltDIN 609 Bolts, screws, studs

Knurled nutDIN 6303 Nuts

Hexagon nut with a eight of 1.5 dDIN 6330 Nuts

Hexagon collar nut with a eight of 1.5 dDIN 6331 Nuts

Grub screws with thrust pointDIN 6332 Bolts, screws, studs

Washer for clamping devicesDIN 6340 Washers

Clip BoltsDIN 6378 Bolts, screws, studs

Rivet setsDIN 6434 Rivets

Vis de précision à tête fraisée à empreinte cruciforme déportée avec saillies antidérapantes, filetage MJ de longueur courte en acier résistant à la corrosion, résistance nominale en traction de 1100 MPa, pour température jusqu'à 425 °C

DIN 65 316 Bolts, screws, studs

Vis à tête hexagonale, filetage MJ de longueur courte, en acier résistant à la corrosion, résistance nominale en traction 1100 MPa, pour température jusqu'à 425 °C

DIN 65 555 Bolts, screws, studs

Ecrou hexagonal bas, filetage MJ, en acier résistant à la corrosion, classification: 1100 MPa/315 °C/425 °C

DIN 65281 Nuts

Knurled thin thumb screwsDIN 653 Bolts, screws, studs

Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

DIN 660 Rivets

Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

DIN 660 Rivets

Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

DIN 661 Rivets

Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

DIN 661 Rivets

Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

DIN 662 Rivets

Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

DIN 662 Rivets

Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

DIN 674 Rivets

Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

DIN 674 Rivets

Flat countersunk head rivets with nominal diameters from 3 to 5 mmDIN 675 Rivets

Semitubular pan head rivets with nominal diameters from 1.6 to 10 mmDIN 6791 Rivets

Conical spring washers for bolt/nut assembliesDIN 6796 Washers


/ 599



Toothed lock washers - Type A, with external teethDIN 6797 Washers

Toothed lock washers - Type J, with internal teethDIN 6797 Washers

Toothed lock washers - Type V, countersunkDIN 6797 Washers

Serrated lock washers - Type A, with external teethDIN 6798 Washers

Serrated lock washers - Type J, with internal teethDIN 6798 Washers

Serrated lock washers - Type V, countersunkDIN 6798 Washers

Lock washers (retaining washers) for shaftsDIN 6799 Rings, bushes, sleeves, collars

Nails for assembling timber pallets - Type A, helical threaded shank flat head nailDIN 68 163 Pins, nails

Nails for assembling timber pallets - Type K, annular ringed shank flat head nailDIN 68 163 Pins, nails

Gib-head saddle keysDIN 6881 Keys and keyways, splines

Saddle keysDIN 6881 Keys and keyways, splines

Parallel keysDIN 6883 Keys and keyways, splines

Gib-head parallel keysDIN 6884 Keys and keyways, splines

Parallel Keys - Type A, round-endedDIN 6885 Keys and keyways, splines

Parallel Keys - Type A, round-ended - Part 2DIN 6885 Keys and keyways, splines

Parallel Keys - Type A, round-ended without retaining screw - Part 3DIN 6885 Keys and keyways, splines

Parallel Keys - Type B, square-endedDIN 6885 Keys and keyways, splines

Parallel Keys - Type B, square-ended without retaining screw - Part 3DIN 6885 Keys and keyways, splines

Parallel Keys - Type C, round-endedDIN 6885 Keys and keyways, splines

Parallel Keys - Type C, round-ended - Part 2DIN 6885 Keys and keyways, splines

Parallel Keys - Type C, round-ended for retaining screw - Part 3DIN 6885 Keys and keyways, splines

Parallel Keys - Type D, square-endedDIN 6885 Keys and keyways, splines

Parallel Keys - Type E, round-ended with holes for 2 retaining screwsDIN 6885 Keys and keyways, splines

Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2DIN 6885 Keys and keyways, splines

Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3DIN 6885 Keys and keyways, splines

Parallel Keys - Type F, square-ended with holes for 2 retaining screwsDIN 6885 Keys and keyways, splines

Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw

DIN 6885 Keys and keyways, splines

Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws


Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve


Taper Keys - Type A, rounded-endedDIN 6886 Keys and keyways, splines

Taper Keys - Type B, square-endedDIN 6886 Keys and keyways, splines

Taper Key with gib-headDIN 6887 Keys and keyways, splines

Woodruff keys - Allocation IDIN 6888 Keys and keyways, splines

Woodruff keys - Allocation IIDIN 6888 Keys and keyways, spl

Documents

Types of parts included in TraceParts DVD 2010 (2.6.1) · Types of parts included in TraceParts DVD 2010 (2.6.1) Category ANSI B18.16.3M Nuts Prevailing-Torque Hex Flange Nut ANSI