TXTResumeMarch2016

Blake C. Hamilton44 Golden Eagle Drive

Boise, Idaho 83716Home: (208) 342-1622 Cell: (208) 591-1941

Home Email: [email protected] Profile at: /http://www.linkedin.com/pub/blake-hamilton/32/3a/9a1/

SUMMARY OBJECTIVE: I seek to apply my extensive and diversified experience in supervision, project management, planning, and technical engineering within a dynamic company.

MILITARY EXPERIENCE

United States Air Force Sergeant1980 - 1984

Honorable discharge Professional Military Education Leadership (NCO Training) Graduate Awarded Air Force Achievement Medal, Good Conduct Medal, Expert Marksmanship Ribbon and Overseas Tour Ribbon Duty Stations include: Lackland AFB, San Antonio, TX; Grand Forks AFB, Grand Forks, ND; Pirincirlik Installation,

Diyarbakir, Turkey; Luke AFB, Phoenix, AZ. Secret Clearance for access/work in nuclear missile field/weapons storage area.

PROFESSIONAL EXPERIENCE

BWXT Conversion Services/U.S. Department of Energy (DOE)/E2 Consultants – DUF6 ProjectPaducah DUF6 FacilityPaducah, KYProject Manager/Outage Manager/Contract Planner SuperintendentJanuary 2016 - Present

Lead and support all maintenance outage planning and scheduling activities at the Paducah DUF6 facility. Utilize maintenance planning and scheduling skills, including development of integrated outage schedules, in preparation

for planned plant outages. Schedule (using P6) and facilitate pre-outage planning meetings and post outage critique meetings. Primary responsibility over the planning and scheduling effort for all mechanical, I&C and electrical work tasks. Coordinate with operations personnel to ensure activities are planned, scheduled, and executed in a safe, disciplined

manner. Management/scheduling of contractor services up to and during outage execution period. Ensure all aspects of safety and environmental requirements are incorporated and executed in technical work documents. Direct Supervisor for Project Personnel (Planners, Schedulers, Project Controls, etc.). Superintendent for all Contract Planners. Work Control Planner Qualified. Review designs under development with responsible engineers to validate design, constructability and testing instructions

and provide feedback during all phases of package development and implementation.

Florida Power and Light (FPL)/ACA – FPL Single Point Vulnerability (SPV) ProjectTurkey Point Nuclear Power PlantHomestead, FLNuclear EvaluatorNovember 2015 - December 2015

Single Point Vulnerability (SPV) Evaluation/Classification.

http://www.linkedin.com/pub/blake-hamilton/32/3a/9a1/

mailto:[email protected]

PROFESSIONAL EXPERIENCE (CONTINUED)

ACA/Battelle Energy Alliance (BAE)/U.S. Department of Energy (DOE) – ATR PMO ProjectIdaho National Lab (INL)Idaho Falls, IDNuclear Planner/ Procedure Writer/ Evaluator/August 2014 - Oct 2015

Review/Revise/Create Nuclear Procedures, Plans and Technical Documents, using WORD and Adobe Pro. Created a Change Management Program, Process and Plan Introduce Industry Standard Templates, Formats, Forms and Methodology. Perform technical review of PMs using Asset Suite Assist in configuration management, performing cross check of EQ IDs, using Asset Suite and EDMS. Ensure pertinent data is detailed and accurate for the PM Bases Plan Model Work Orders (Mechanical/Civil) for Preventative Maintenance Tasks, using Asset Suite (PassPort). Plan Work Orders (Mechanical/Civil) for CIC Project, using Asset Suite (PassPort).

Perform Project Manager (PM) role, as required

Fluor-B&W/USEC/U.S. Department of Energy (DOE) – Balance of Plant (BOP) Decontamination & Decommissioning (D&D), Portsmouth Gaseous Diffusion PlantPiketon, OHWork Control Planner, PrincipalJuly 2014- August 2014

Review and validate work requests and updates status in CMMS as appropriate. Develop work control documents that capture all work elements and routes for approval Assemble planning team from appropriate functional areas to obtain all elements of work scope performance and capture

in the work control document Identify safety class of systems and apply appropriate planning requirements Ensure a hazard assessment Is performed for all work and the work control document contains any required actions to

mitigate the known hazard Support Job briefings, as necessary, with the assigned work groups Identify permits, training, plant conditions and other requirements that support work performance Manage schedule development to maintain scope within the bounds of resource allocation Resource for lesser experienced team members Subject matter expert for work control projects Enter new dates for PM work orders and other repetitive activities In CMMS

MPS/CB&I/PG&E – Decontamination & Decommissioning (D&D) at Humboldt Bay Nuclear Power PlantEureka, CAWork Control ManagerDecember 2013- July 2014

Manage and supervise field engineering and the preparation of work plans, work instructions, and technical procedures in support of the decommissioning and demolition of the HBPP.

Manage and supervise Field Engineers and Work Planners in day-to-day activities/duties. Develop a Work Control process, to include; Procedures, Forms, Templates, etc., and a Process Flow. Monitor implementation to ensure proper oversight and that proper documents (procedures, drawings work instruction,

etc.) are being used, and that all documents have met the requirements as procedurally prescribed by Document Control. Ensure field installation and field activities are carried out as dictated by the approved engineering design and

corresponding work package. Manage, and provide input to project schedule development, updates and reviews (using P6). Oversee designs under development with responsible engineers to validate implementation and testing instructions and

provide feedback during all phases of package development. Ensure proper Take-offs are performed, and correct materials/parts are procured. Develop a positive working relationship to effectively coordinate work activities. Apply knowledge of Decommissioning, HBPP, and PG&E procedural processes. HAZWOPER Supervisor and 40 Hour HAZWOPER Trained.

Blake Hamilton Resume


MPS/CB&I/PG&E – Decontamination & Decommissioning (D&D) at Humboldt Bay Nuclear Power PlantEureka, CASenior Work Planner/Field Engineer/Procedure WriterNovember 2013- December 2013

Participate in equipment and site walk downs to support construction and work planning. Monitor implementation to ensure proper oversight and that proper documents (procedures, drawings work instruction,

etc.) are being used. Ensure field installation and field activities are carried out as dictated by the approved engineering design and

corresponding work package. Create/Revise Procedures. Support project schedule development, updates and reviews (using P6). Review designs under development with responsible engineers to validate implementation and testing instructions and

provide feedback during all phases of package development. Prepare thorough and accurate technical reports, correspondence and documentation. Develop a positive working relationship to effectively coordinate work activities. Apply knowledge of Decommissioning, HBPP, and PG&E procedural processes.

Kiewit Power Nuclear (KPN) – Corporate Nuclear Construction (Humboldt Bay, Brunswick & Watts Bar Nuclear Power Plants), Lenexa, KSPlanning-Field Engineering Manager/Work Package ManagerFebruary 2013- November 2013

Supervise Field Engineers/Planners in there day to day duties. Prepare, Review and Approve construction/modification Work Packages/Work Orders (using PassPort, Maximo,

SharePoint, Documentum & WORD). Review and approve corporate/site specific Procedures/technical documents Manage Work Package milestones in the Plant/Project Schedule (using P6). Perform the duties as the Single Point of Contact for all Work Control/Work Planning issues. Develop a Work Control process, to include; Procedures, Forms, Templates, etc., and a Process Flow – at the Corporate,

and Site Level. Mentor New to Nuclear Planners, as well as Supervision. Establish Project Scope of Work and create Work Packages to perform that work (using SharePoint). Perform schedule reviews, additions/deletions (using Primavera P6). Review and Approve Procedures, Work Packages, and Technical Documents. Project Assignments Include: Humboldt Bay – D&D; Brunswick – SDG (Fukushima Mod); Watts Bar – FLEX Building

(Fukushima Mod).

Black Diamond/Xcel Energy – Prairie Island Nuclear Generating Plant, Welch, MNNuclear N-1/SGRP Field Engineer/Planner/Procedure Writer III (Night Shift PFE) – Mechanical, CivilMay 2011-November 2012

Prepare and review plant/equipment modification work packages; both Outage and non-outage (using Passport, and Sharepoint).

Develop a Work Control process, to include; Procedures, Forms, Templates, etc., and a Process Flow. Prepare and review project procedures (using WORD). Provide technical assistance to craft personnel, as well as assist

management/engineering in constructability/design issues of the Project. Perform Drawing Take-offs, and BOM Reviews. Identify correct parts/materials and procure/purchase same. Perform field walk-downs with craft supervision, design engineering, and support groups Perform schedule reviews, additions/deletions (using Primavera P6). Perform Field Engineering functions, such as; Initiate/Review/Process Field Change Requests (FCRs), Field Sketches

(FSKs), As-Built Sketches, Redline Sketches, Work Package Change (WPC), JHAs, Pre Job Briefs, etc.



D&K Diversified Consulting/OPPD – Fort Calhoun Nuclear Station, Fort Calhoun, NE Nuclear PMO/EROP Project Planner Sr. – Mechanical, Weld, CivilFeb 2011-April 2011

Responsible for supporting the PM/EROP Upgrade Project and work order planning process by evaluating the condition of components, equipment, and systems

Prepare work plans for corrective and preventive maintenance (using Passport/Asset Suite). Perform upgrades to Maintenance Procedures to include Testing and Surveillance Procedures. Identify correct parts/materials and procure/purchase same. Provide Cost/Time Estimates. Determine pre and post maintenance test requirements. Interface with design engineering and other work groups in the design development and implementation process. Provide work scope and schedules (using Primavera P6) to support project activities.

Samico Inc./Bechtel/FPL – Point Beach Nuclear Plant, Two Rivers, WI Nuclear EPU Field Engineer/Planner III – Mechanical, Weld, CivilSep 2010-Feb 2011

Prepare and review plant/equipment modification packages; both Outage and non-outage (using Passport, NAMS, Sharepoint and Documentum).

Provide technical assistance to craft personnel, as well as assist management/engineering in constructability/design issues of the Project.

Perform Drawing Take-offs, and BOM Reviews. Identify correct parts/materials and procure/purchase same. Provide Cost/Time Estimates. Perform Field Engineering functions, such as; Initiate/Review/Process Field Change Requests (FCRs), Field Sketches

(FSKs), As-Built Sketches, Redline Sketches, Work Package Change (WPC), JHAs, Pre Job Briefs, etc. Emergency Responder. Plan, review, evaluate and/or supervise preparation of reports, logs, and budgets.

Samico Inc. /D&Z NPS/TVA – Watts Bar Nuclear Plant, Spring City, TNField Engineer/Planner (Night Shift Lead) – Mechanical, Civil–Unit 2 Construction Completion Project/Start-upMay-Sep 2010

Provide technical advice, assistance and direction to support the project activities. Provide on-site interpretation of data, drawings, and technical instructions. Manage and direct (supervise) diverse staff to complete project work scopes Provide work scope and schedules to support project activities Provide clear, concise customer reports at completion of jobs Perform design output constructability reviews. Field material take-offs, procurement support, and development of BOM(s). Perform field walk-downs with craft supervision, design engineering, and support groups. Perform Work Package Planning (using Maximo, Documentum, SAP & SWAP) in Mechanical, Weld & Civil disciplines. Assist customer with project management to include work scope reviews, craft scheduling, and

staging of parts and equipment. Provide the required documentation/perform engineering review, upon work completion, and close

work packages (using Maximo, Documentum & SWAP). Perform Field Engineering functions, such as; Initiate/Review/Process Field Change Requests (FCRs), Field Sketches

(FSKs), As-Built Sketches, Redline Sketches, Work Package Change (WPC), etc.



Aerotek Energy Services/APS - Palo Verde Nuclear Generating Station, Phoenix, AZNuclear Project/Modification Planner III – Mechanical, Weld, Civil Sep 2009-May 2010

Prepare and review plant/equipment modification packages (using SMWS). Provide technical assistance to craft personnel, as well as assist

management/engineering in constructability/design issues of mods/projects. Perform Drawing Take-offs, and BOM Reviews. Identify correct parts/materials and procure/purchase same (using SWMS, MLIS). Provide Cost/Time Estimates. Ensure and coordinate the proper disciplines/vendors/contractors are included and

scheduled into the project at the appropriate time. Perform Field Engineering functions. Section XI Qualified. Perform schedule reviews, additions/deletions (using Primavera P6). Perform Field Engineering functions, such as; Initiate/Review/Process Field Change Requests (FCRs), Work Order

Amendments, etc.

Dominion- Kewaunee Nuclear Power Station, Kewaunee, WIGeneral Supervisor (Superintendent) -Nuclear Project ControlsApr 2008-Sep 2009

Project authorization and construction/project schedules (using Primavera P3e) and work orders (using Maximo, SAP, Documentum and EMPAC).

Project variance and forecast reporting on capital maintenance projects Development of capital budgets Supervise /Coordinate activities of Controls and Materials Specialists, Planners, Schedulers, and Estimators. Interface with station management and other departments to assure effective control and reporting of construction and

maintenance project costs, scheduling, and budgeting. Perform the duties of Manager Nuclear Site Services as needed. Ensure close-out and maintenance of project authorizations. Provide expertise in developing and maintaining the station capital budget, long range plan, and five year (capitol living

plan) forecast. Review/Review Procedures for Procedure Upgrade Project (using FrameMaker & Adobe). Assign projects to employees and track the completion of each assignment. Provide technical assistance/oversight to craft personnel, as well as assist management/engineering in

constructability/design issues of mods/projects. Assume the Supervisor of Mechanical/Civil Construction role as needed.

Nuclear Energy Consultants/Dominion - Kewaunee Nuclear Power Station, Kewaunee, WISenior Technical SpecialistJan 2008-Apr 2008

Procedure Writer/Reviewer for Dry Fuel Loading Campaign (using Framemaker). Technical Advisor/Support of the ISFS/HSM construction/installation (NUHOMS HSM-102). Procedure Writer/Reviewer for ISFSI/HSM construction/installation (using Framemaker). Technical Advisor/Support of the Dry Fuel Loading Campaign (DSC 32PT).



Nuclear Management Company – Fleet Nuclear Power Generation (Prairie Island, Monticello, Point Beach, & Palisades Nuclear Power Plants) Hudson, WIProject Manager, High Level WasteSep 2006 - Jan 2008

Operational/Technical support of all Cask Loadings (2 to date at Prairie Island; TN 40 Casks). Oversight and technical assistance of/for Project Support Groups. Manager of Dry Fuel OE Database. Mechanical/Civil Planner for ISFSI Project (at Monticello, using Passport & SharePoint). Provided technical assistance with ISFSI Array Expansion at Palisades (NUHOMS HSM-H). Procedure Writer/Reviewer (using Passport, WORD and SharePoint). Manager/Facilitator of the Action Item List between Transnuclear and NMC. Oversight/Technical Support of the ISFSI construction at Monticello (NUHOMS HSM-H). Technical Advisor/Support of the Dry Fuel Loading Campaign (DSC 61BTH).

Sonbyrd Industries, Emmett, IDProduction Manager2005 – 2006

Responsible for O&M Budget. Establish and initiate periodic and corrective maintenance programs. Supervise multiple employees and ensure optimum usage of personnel for changing production demands. Procure raw materials, consumables and tooling.

Arizona Public Service – Palo Verde Nuclear Generating Station, Phoenix, AZ1985 - 2005

Nuclear Planner/Advisor Sr. - Engineering, Mechanical Maintenance, ISI, RP, Snubbers2001 – 2005

Create and review Technical Work Instructions for multiple disciplines (using Word and Visio). Create and review Procedures to satisfy federal, local and station regulations/guidelines (using FrameMaker & Adobe). Participant in Procedure Upgrade Project (using FrameMaker & Adobe). Prepare and review corrective/preventative work packages (using SMWS & SIMS). Identify correct parts/materials and procure/purchase same (using SWMS, SIMS & MLIS). Prepare and review plant/equipment modification packages (using SMWS & SIMS). Assure adherence to NRC, Federal, State, and Site regulations and procedures. Responsible for time management/costs of projects and estimate and determine cost effectiveness. Provide oversight and technical assistance to responsible groups. Section XI Qualified. APS Pre-Supervisory Graduate Back-up Civil Planner Performed Back-up Supervisory Role (Section Leader) for Planning Department when needed. Performed RCM/PMO/EROP for mechanical systems. Perform Field Engineering functions, such as; Initiate/Review/Process Field Change Requests (FCRs), Work Order

Amendments, etc. Completed Formal Structured Planner Training and Qualification Process, via Job Qualification Cards (JQCs), TPEs &

JPMs.



Nuclear Training Coordinator/Instructor – Maintenance1999 - 2001

Compose Technical Training Platforms and Lesson plans for multiple disciplines (using Word, PowerPoint and SAT Process).

Create and review Procedures to satisfy federal, local and station regulations/guidelines (using FrameMaker). Coordinate and scheduled training pertaining to maintenance. Coordinate and scheduled training for site-specific requirements. Develop and instructed classes pertaining to maintenance. Perform Supervisory role during classroom settings.

Journeyman, Nuclear Mechanic (Millwright)1997 - 1999

Perform mechanical maintenance modifications. Perform periodic and corrective mechanical maintenance activities. Refueling overhauls/outages. Maintain nuclear and water treatment plants. Perform welding (qualified to Section IX SMAW, GTAW) and rigging evolutions. Mobile (CDL holder), overhead and stationary crane operator. Perform Supervisory role (Foreman/Lead) on a routine basis. Qualified to the Requirements of ANSI 3.1; INPO/ACAD Accredited Program.

Apprentice, Nuclear Mechanic (Millwright) 1995 – 1997

Received “Apprentice of the Year” award from the State of Arizona. Completed 862 hours of classroom training, and 4,963 hours of OJT. Finished apprenticeship program four months prior to standard schedule. Earned both Federal and State of Arizona Journeyman Certification (Card & Book). Qualified to the Requirements of ANSI 3.1; INPO/ACAD Accredited Program.

Arizona Public Service – Palo Verde Nuclear Generating Station, Phoenix, AZ (continued)1985 - 2005

Industrial Coater Trainee1994 – 1995

Mechanical Helper/Utility Worker1992 – 1994

Nuclear Security (CAS Operator)1985 – 1992

EDUCATION Suffield University, Internet, Bachelor of Science- Technical Management. Graduated with a 3.7 GPA, 2008 Arizona State University West, Phoenix, AZ, Bachelor of Science (Non-Graduate) - Business – 2002. Inducted Golden

Key International Honor Society, 2002Accepted in Barrett’s Honor’s College at ASU, 4.0 GPA, 2002

Gateway Community College, Phoenix, AZ, Associates Degree – Manufacturing Technology - 2001. Earned Associates Degree with High Honors in 2001. Achieved National Dean’s List in 2000 – 2001, Achieved President’s Honor List in 2001 - Earned Certificate of Completion (Manufacturing Tech.) with Highest Honors in 2001 - Honors Program Completer - Inducted into Phi Theta Kappa International Honor Society, in 2000.

U.S Department of Labor/State of Arizona, Nuclear Power Plant Mechanic Apprenticeship – 1997Awarded State of Arizona Apprentice of the Year.Earned Nuclear Power Plant Mechanic Journeyman Card (Federal and State of Arizona).Qualified to the Requirements of ANSI 3.1; INPO/ACAD Accredited Program.


CERTIFICATIONS HAZWOPER Supervisor (per 29CR 1910.120[e]). March 2014 – March 2015 40 Hour HAZWOPER (per 29CR 1910.120[e]). March 2014 – March 2015 Manufacturing Technology. GateWay Community College. August 2001 – Present ANSI 3.1, Qualification and Training of Personnel for Nuclear Power Plants. August 1997 – Present INPO, ACAD, U.S Department of Labor, and State of Arizona, Nuclear Power Plant Mechanic. August 1997 - Present

COURSESDominion Power:

Supervisor Labor Relations Training (MARC) Maximo Documentum SAP EMPAC

Arizona Public Service (APS): Adobe Pro Pre Supervisor Academy SWMS MLIS SIMS

United States Air Force: PME NCO Training

NMC: Project Management Development Risk Management Workshop PassPort (Asset Suite) SharePoint

NextEra Energy Resources PassPort/Asset Suite/NAMS Documentum SharePoint

TVA: Maximo Documentum

Kiewit: SharePoint

Duke Energy: PassPort (Asset Suite) SharePoint

CB&I: SharePoint

INL: PassPort (Asset Suite)

BWXT: Documentum
