Heavy Duty 2-3 BedwayManualPlus CNCLathesEuropean TUR1350-1850MN/CNC Lathes

Features53” or 61”swing over bed x 78” - 629” bc•65” or 73” swing over bed x 78” - 315” bc•2 or 3-way beds with front support way for apron•Siemens 840DSL Shop Turn or Fanuc 0iTD Manual Guide•Massive 40” / 43” wide bed, “solid” base from floor to front way•Big 5.5”, 8.6”, 12.5”, 14.2” 17.7”, 22” or 26” spindle bores•Up to 75 HP, load capacity up to 30,800 lbs•High speeds handle wider range (5.5” bore to 900 RPM)•3rd moveable hand wheel for easy toolsetting•Automatic shifting headstock•Gap bed allows swing up to 69” (TUR1550MN)•Full rear guarding and 1 front door guard•X-axis linear direct feedback scale standard•Z-axis linear measuring system for 236” and longer bc•Built-in chip conveyor standard•Rapids to 393 IPM reduces non-cut time•Heavy-duty tailstock rides on air cushion with come-along for operator ease•Large 7.9” diameter quill with built-in live center• Wide range of options including power or manual chucks, power turrets, live •tooling with C and Y axes, hydraulic or manual steadies, hydraulic tailstock, special extra heavy-duty spindle or extra heavy-duty steadies, load capacity up to 80,000 lbs bc, 4-way 3-shear bed, etc.

www.toolmex.com

Extra-wide front V-way, heavy ribbed “solid” bed, gap for increased swing

Carriage with choice of turrets, control, linear bearings or block ways for X-axis

Hydraulic tailstock with come-along, air assist lift

TUR1350-1850MN Manual Plus CNC Lathes

2015 S. Mitchell Blvd., Schaumburg, IL 60193+1-847-301-3700 • 800-992-4766 • Fax +1-847-301-3703www.toolmex.com

Distributed by

4-999-7003 2-12 2.0

©2012 Toolmex Industrial Solutions. All rights reserved. All specifications on this sheet are subject to change without notice. Photos shown are a general representation of the various models and may include some optional equipment. Toolmex Industrial Solutions, Elektrim, and Elektrimax are trademarks of Toolmex Corporation, Inc.

Scan and Explore

Capacity / Model 53"TUR1350MN

61"TUR1550MN

65"TUR1650MN

73"TUR1850MN

Swing Over Bed 53.1" 61" 64.9" 73"Swing Over Cross Slide 35.4" 43.3" 49" 57"Distance Between Centers 78", 157", 236", 315", 393", 472", 551", 629" bc 78", 157", 236", 315" bcSwing Over Gap 61" 68.9" 73" 80"Length of Gap (from Spindle Face) 22.8" 22.8" 22.8" 22.8"Max. Workpiece Weight in Chuck (Option) 4,400 lbs 4,400 lbs 3,300 lbs (HD 8,000 lbs) 3,300 lbsMax. Workpiece Weight bc without Steadies (Option) 19,800 lbs (30-60,000 lbs) 19,800 lbs (30-60,000 lbs) 19,800 lbs (HD 33,000 lbs) 19,800 lbsMax. Workpiece Weight bc with 2 Steadies (Option) 33,000 lbs 33,000 lbs (80,000 lbs) (80,000 lbs)

Bed

Width of Bed, Top / at Base (4-way / 3-shear) 40.1" / 43.3" (51" / 71") 40.1" / 43.3" (51" / 71") 40.1" / 43.3" (51" / 71") 40.1" / 43.3" (71")Height of Bed 30" 30" 30" 30"

Headstock

Spindle Bore, Std. 5.5" 5.5" 5.5" 5.5"Spindle Bore, Optional 8.6", 12.5", 14.2", 17.7", 22", 26" 8.6", 12.5", 14.2", 17.7", 22", 26"# of Spindle Ranges, Autoshifting 2 2 2 2Spindle Speed Ranges with 5.5" Bore 2-200 RPM and 180-900 RPM 2-200 RPM and 90-450 RPMMain Drive Power (Option) 50 HP Continuous / 75 HP at 40% Duty (75 HP) 50 HP Continuous / 75 HP at 40% Duty (75 HP)Max. Turning Torque 6085 ft lb (8250 Nm) 6085 ft lb (8250 Nm) 6085 ft lb (8250 Nm) 6085 ft lb (8250 Nm)Spindle Nose, 5.5" A2-15 A2-15 A2-15 A2-15

Carriage

Cross Slide Travel, X-axis, 2-way bed 29.5" 30.5" 37.9" 37.9"Rapid Travels, Z and X axes 315 IPM / 393 IPM 315 IPM / 393 IPM 315 IPM / 393 IPM 315 IPM / 393 IPMMax. Feed Force, X-axis 5,500 lbs f (25 kN) 5,500 lbs f (25 kN) 5,500 lbs f (25 kN) 5,500 lbs f (25 kN)Max. Feed Force, Z-axis 7,700 lbs f (35 kN) 7,700 lbs f (35 kN) 7,700 lbs f (35 kN) 7,700 lbs f (35 kN)Ball Screw Diameter, X-axis 1.57" (40mm) 1.57" (40mm) 1.57" (40mm) 1.57" (40mm)

Ball Screw Diameter, Z-axisor Gear Drive (GD)

3.15" (80mm) Ball Screw for 78" & 157" bc or Dual Pinion & Rack Drive for 236"-629" bc

3.15" (80mm) Ball Screw for 78" & 157" bc or Dual Pinion & Rack Drive for 236"-315" bc

Carriage Length Bearing on Ways 45.3" 45.3" 45.3" 45.3"T-Slot Riser for Manual Toolpost Standard Standard Standard Standard8-pos Disc Type Turret VDI 60 DIN79880, Optional VDI 60, On Request4-pos Head Type Turret NG 40 DIN68881, Optional NG 40 DIN68881, Optional

Tailstock

Quill Diameter, Std. 7.9" (11"/ 16") 7.9" (11"/ 16") 7.9" (11"/ 16") 7.9" (11"/ 16")Quill Taper with Built-In Live Quill MT6 MT6 MT6 MT6Quill Stroke 5.9" 5.9" 5.9" 5.9"

General

Machine Length bc + 126" bc + 126" bc + 126" bc + 126"Machine Width 116" / 130" 120" / 136" ~130" / ~146" ~130" / ~146"Machine Height 100" 108" ~124" ~124"Machine Weight, 157" bc (4-way / 3-shear) 45,600 lbs (60,500 lbs) 47,300 lbs ~50,000 lbs (65,000 lbs) ~52,000 lbsMachine Weight, 236" bc (4-way / 3-shear) 51,100 lbs (66,600 lbs) 52,800 lbs ~56,000 lbs (71,000 lbs) ~58,000 lbs