TRUMPF TRULASER 1030 - maschinen-kistner.de · Rack and pinion systems execute the traversing movements. The motor of the Z axis moves the cutting head through a belt. Catcher . Slugs

KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

TRUMPF TruLaser 1030

2D – Laser cutting machine

Manufacturer TRUMPF Model TRULASER 1030 Manufacture year 2010 Control B&R Automation PC 620 Machine number A0215A0053 Travels X – 3.048 mm / Y – 1.524 mm / Z – 76 mm Laser beam on approx. 5.750 h

The machine has a continuous TRUMPF CLASSIC service contract

2 - TRUMPF TRULASER 1030

TECHNICAL DATA

Working area X-axis 3.048 mm

Y-axis 1.524 mm

Z-axis 76 mm Workpiece Max. weight 575 kg Max. speed Axially 60 m/min

Simultaneous 85 m/min

Acceleration cutting 2 m/s2

Accelaration positioning 6 m/s2 Smallest programmable distance

0.001 mm

Laser data

TruCoax 2000

Max. power 2.000 W

Wave length 10,6 µm

Beam mode TEM00

Power stability ± 2% Max. material thickness Structural steel / Stainless steel / Aluminium 15 mm / 6 mm / 5 mm Electrical connection

65 kVA

Hedge at 400 V / 460 V 100 A Dimensions of the machine (L x W x H)

7.369 x 2.723 x 2.291 mm

Total weight, approx. 8.850 kg


EQUIPMENT

NEW transmitting tube „Power Tube Plus 3021“ | February 2018 NEW disc bellows for beam guidance | February 2018 NEW deflection mirror „D68 Cu 9392-113“ | February 2018 NEW PREMIX bottle | April 2018 CO2-Laser Trucoax 2000 2 Laser cutting heads 7,5‘‘ Extendable pallet with pallet guide Compressed air cutting FocusLine / ControlLine / NitroLine / ContourLine Closed machine frame with integrated laser unit Movement unit for high-precision machining Drives with maintenance-free three-phase servomotors Sheet metal support accessible on both sides Closed beam guidance Fully integrated cooling unit Moving suction Collecting container for falling parts under the work area Nozzle cleaning brush Positioning laser diode Intuitive touch operation on the 15'' screen Workshop programming directly from *.dxf Integrated technology data Teleservice via Internet USB interface / RJ-45 networking / Network connectivity CE-label and machine cover with macrolon discs Motorized front door and rear opening User guide / Documentation / Machine parameter

4 - TRUMPF TRULASER 1030 Source: free translation of TRUMPF user manual

1 Control cabinet

2 TruCoax Laser

3 Control panel

4 Motion unit

5 Front door

Machine overview

6 Machine frames

7 Protection cabin

8 Cooling and suction unit

9 Cutting head

10 Waste drawers

The TruLaser 1030 is a CNC laser cutting machine for processing flat metal sheets. The tool used for this purpose is the laser beam, which is guided by mirrors to the laser cutting head.

The machine works according to the principle of flying optics: the workpiece remains in place and the cutting head moves.

Axes directions

Machine frames

• The rigid machine frame in conjunction with the traverse across the machine ensures a stable base for the entire machine.

• The open frame on both sides ensures good accessibility to the entire metal sheet.

Machine frames with sheet metal support

Sheet metal support

The working area of the sheet metal tray with the dimensions 3000 x 1500 mm offers sufficient space for all tasks.


Movement unit with Catcher

Movement unit

The movement unit attached to the crossbeam carries the Y and Z axis as well as the motor for the X axis.

Rack and pinion systems execute the traversing movements.

The motor of the Z axis moves the cutting head through a belt.

Catcher

Slugs and small pieces are caught by a catcher below the work area. The catcher is attached to the movement unit and is moved parallel to the Y axis. The catcher also acts as a suction area for all flue gases that arise during the cutting process.

The catcher also has an automatic removal cycle for all stuck pieces.

1 Movement unit 2 Catcher


TruCoax Laser

Efficient & reliable

The laser consists of the beam generator and the HF generator.

The beam generator of the TruCoax C02 laser consists of two coaxially aligned electrode tubes. Inside the tubes, the beam is reflected by two mirrors and travels around the inner tube. The entire system is diffusion-cooled. A small gas cylinder attached directly to the jet generator supplies the laser gas mixture.

The cooling unit and the suction of the machine are united in one unit for efficiency and space reasons.

The KLH cooling unit cools the laser with the complete beam guidance as well as the catcher, the HF generator and the control cabinet.

The suction sucks the flue gases and suspended particles out of the work area.

Beam generator Beam telescope

The HF generator generates the high-frequency energy required to operate the laser.

Combined cooling and suction unit

Positioning laser diode

A laser diode integrated in the beam telescope of the TruCoax laser generates a red light spot at the exact cutting position.

With the help of this visible light point, it is possible to exactly approach the starting point for the next laser cut.


Control panel

The TRUMPF CNC control is based on the PC control of the B&R Automation PC 620. • Easy-to-use and clearly arranged control panel. All functions that are needed in daily operation can be started by pressing a few buttons.

• High-quality TFT color display (thin film transistor) with touchscreen function.

An online connection via remote access has been set up between the machine and a technical customer service technician at TRUMPF.

• Remote control • Teleservice • Remote administration • Data transfer

Teleservice


FocusLine

FocusLine is a device for automatic focus position adjustment. The central component is the autofocus mirror, whose surface is deliberately deformed by the cooling water pressure. Thereby, the divergence angle of the laser beam is changed so that a systematic shift of the focus up or down is made possible.

NitroLine means: Melt cutting with nitrogen and a cutting gas pressure of max. 20 bar, which expels the melt quickly down.

Recommended especially for machining stainless steel and aluminum alloys.

NitroLine

ControlLine

ControlLine coordinates and controls different machine functions centrally:

• Capacitive distance control for constant distance nozzle-sheet metal.

• Automatically measure the work floor position and possibly correct the coordinate system.


Power consumption including extraction and cooling unit at ambient temperature 25°C.

Electric power consumption

The electrical power consumption of the machine depends on the laser power

P [kW] Power consumption machine and laser P [%] Laser power in percent of the maximum power

Max. material thicknesses and cutting speeds


MACHINE PICTURES




*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

Thank you very much for your interest

KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

Documents

TRUMPF TRULASER 1030 - maschinen-kistner.de · Rack and pinion systems execute the traversing movements. The motor of the Z axis moves the cutting head through a belt. Catcher . Slugs