Upload
doancong
View
224
Download
2
Embed Size (px)
Citation preview
Page 1
Trimble Access and GNSS receivers technical support
Connecting to Reference Stations Networks: Configuring the GPS receiver for VRS corrections
Updated (FDOT) FPRN NTRIP Example
Alaa Shams Surveying Technical Support and Training October, 2014
Page 2
This technical support document created to help our customers connect their Trimble TSC3
Data collector running Trimble Access v 2014.12 and running R10 GPS GNSS receiver to
FPRN and NTRIP station through a Wi-Fi Connection.
Step 1: Start Trimble Access
Step 2: Click on settings
Step 3: Click on Connect
Step 4: Click on GNSS contacts
Page 3
Step 5: Add New GNSS contacts
Step 6: Add Name and Network
Step 7: Enter FPRN and Wi-Fi
Step 8: Setup NTRIP Configuration
Page 4
Step 9: Insert FPRN Credentials
Step 10: Store and connect
Step 11: Internet connection Est.
Step 12: Click on Survey Style
Page 5
Step 13: Create new survey Style
Step 14: Insert a Name and Type
Step 15: Accept
Step 16: Select Rover options
Page 6
Step 17: Select your Survey Type
Step 18: Select your Broadcast Format
Step 19: Accept
Step 20: Make sure to Store
Page 7
Step 21: Exit Survey Styles
Step 22: Exit Settings
Step 23: Click on General Survey
Step 24: Click on New Job
Page 8
Step 25: Give it a name and Cord. Sys.
Step 26: Accept
Step 27: Click on Measure
Step 28: Click on Survey Style
Page 9
Step 29: Click on Measure points
Step 30: Select Internet connection
Step 31: Select Accept
Step 32: Building source list