Upload
nguyenduong
View
227
Download
0
Embed Size (px)
Citation preview
w w w. t r e n d t i m b e r s . c o m . a u
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
TABLES SAWS
Laguna Fusion 10” tablesaw
Laguna Platinum 10" Tablesaw
Laguna Platinum Dovetail 10” Tablesaw
BANDSAWS
Laguna 14” Bandsaw 14 | Twelve
Laguna LT14 SUV Bandsaw
Laguna 18” Bandsaw LT 18 3000
PLANERS / THICKNESSERS
Laguna Planer 16” ShearTec II
Laguna Planer 20” 4 Post Planer
Laguna Planer 20” HD Planer
Laguna Planer 25” HD Thicknesser
JOINTERS
Laguna 6” Jointer
Laguna 6” ShearTec II Jointer
Laguna 8” Wedgebed Jointer with Shear-Tec
Laguna 8” Parallelogram Jointer with Shear-Tec
Laguna 12” Parallelogram Jointer with Shear-Tec
ROUTER AND SPINDLE MOULDING
Laguna Pro Spindle Moulder
LATHE
Laguna Lathe REVO 24 x 36 – 3HP
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Fusion 10’ tablesawLT*FUSION-10/1
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Wheels are built in
Fence Storage
Quick change riving knife & precision fence with Hairline readout
Push Stick is mounted onto the Rip Fence for convenience
Double Miter Slot
TECHNICAL INFORMATION
Motor: 1 3/4 HP, 1 phase
Blade Diameter: 10” (254mm)
Arbor: 5/8”
Max Dado: 13/16”
Quick Release Riving Knife: Yes
Safety Blade Guard: Yes
Rip Capacity Right: 36” (915mm) optional 52” (1320mm)
Rip Capacity Left: 12”(305mm)
Blade Tilt: 90°-45°
Cast Iron Table: 20” x 27” (508mm x 685mm)
Cast Iron Table Extension X 2: 12” x 27” (305m x 685mm)
Table Height: 34 1/2” (876mm)
Built-In Wheel System: Yes
Miter Slots x 2: 3/4” x 3/8” (19mm x 9.5mm)
Dustport: 4” (100mm)
Drive: 1 + 1 Belt
Weight Net/Ship: 266/349 Lbs. (120 / 158kg)
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Platinum 10” TablesawLT*PLATINUM-10/1
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Precision ground table made of premium grade cast iron, heat treated and ground to a mirror like finish.
Massive widely spaced cabinet mounted trunnions: perfectly machined to high accuracy to support the heavy duty saw carriage.
Quick release riving knife with access through throat plate.
Robust spindle supported by two precision ball bearings.
Triple V-belt drive system mounted between the two spindle bearings.
EZ—Glide T square system for accuracy, repeatability and easy operation.
Standard precisely machined miter gauge with adjustable miter bar.
Minimal vibration that ensures proper blade alignment.
CSA, UL, CE certified.
TECHNICAL INFORMATION
Motor: 3HP Leeson single phase
Blade Diameter: (250mm)
Left hand blade tilt: 0-45°
Depth of cut: 90˚| 80mm, 45˚| 57mm
Rip capacity: 762mm, Optional: 1300mm
Arbor spindle size: 16mm: Contact
Assembled table dimension: 1000 x 675 x 850mm H
Dado diameter: 200mm, Maximum width: 20mm
Mitre slots X 2: 19 x 9.5mm
Dust port: 100mm (E-Z remove)
Drive: 3 x V-belt
Weight: 220Kgs
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Platinum Dovetail 10” TablesawLT*DOVETAIL-10/1
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Precision ground table made of premium grade cast iron, heat treated and ground to a mirror like finish.
Heavy duty supported saw carriage in precision machined dovetails: perfectly machined to high accuracy to support the heavy duty saw carriage.
Quick release riving knife with access through throat plate.
Robust spindle supported by two precision ball bearings.
Triple V-belt drive system mounted between the two spindle bearings.
EZ—Glide T square system for accuracy, repeatability and easy operation.
Standard precisely machined miter gauge with adjustable miter bar.
Minimal vibration that ensures proper blade alignment.
CSA, UL, CE certified.
TECHNICAL INFORMATION
Motor: 3HP Leeson single phase
Blade Diameter: (250mm)
Left hand blade tilt: 0-45°
Depth of cut: 90˚| 80mm, 45˚| 57mm
Rip capacity: 1300mm
Arbor spindle size: 16mm: Contact
Assembled table dimension: 1600 x 675 x 850mm H
Dado diameter: 200mm, Maximum width: 20mm
Mitre slots X 2: 19 x 9.5mm
Dust port: 100mm (E-Z remove)
Drive: 3 x V-belt
Weight: 250Kgs
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna 14” Bandsaw 14 | TwelveLT*B/SAW-1412
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Euro-style hinges & ceramic guides
Tension window, tracking window & tension indicator
Worm gear rack & pinion upper guide
Tension quick release
Cast iron wheels
Flat Poly-groove drive belt
Brass-tipped lock handle for rip fence
Adjustable anodized aluminium throat plate
TECHNICAL INFORMATION
Table 540mm x 405mm & height 965mm
90 “ positive stop
45° table-tilt right / 7° table-tilt left
Hi / low aluminium fence 460mm x 140mm x 12mm
Heavy duty cast trunion – 200mm x 330mm
Motor: 1 3/4 HP TEFC single phase
Blade length: 2920mm
Min-Max width of blade: 3mm – 19mm
Resaw capacity: 335mm
Throat Capacity: 330mm
Dust Port: 100mm
Dimensions: 635mm x 460mm x 1785mm high
Shipping dimensions: 1400mm x 565mm x 565mm
Weight: 117kgs
w w w. t r e n d t i m b e r s . c o m . a u
*Does not include blade*Please see our accessories for blade options.
w w w. t r e n d t i m b e r s . c o m . a u
Laguna LT14 SUV BandsawLT*B/SAW-14SUV
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Strong table lock designed to last
Rubber-seals inside doors for improved dust collection & lower noise level
Windows for easy blade tracking adjustments
Large leveling pads for extra suitability
Large and well designed handles & wheels
Quick release blade tension
Foot brake with micro switch
Rack and pinion table tilt 45°R, 15°L
Rack and pinion upper guide
TECHNICAL INFORMATION
Motor: 3HP 1 Phase
Min-Max blade width: 0.125 – 25.4mm
Resaw Capacity: 355mm
Throat: 336mm
Blade Length: 3175mm
Cast Table Size: 500 x 400mm
Table Height: 900mm
Dust Ports: 100mm
Overall Height: 1778mm
Dimensions: 762 X 915 X 1905mm
Net Weight: 154kg
Weight (Ship): 170kg
w w w. t r e n d t i m b e r s . c o m . a u
14” of resaw capacity requires more power & blade width,
so Laguna equipped the LT14 SUV with a 3HP Leeson
motor & gave it a 1” blade capacity.
Coupled with the Laguna Resaw King blade, this saw
makes cutting large stock into smaller workpieces, OR
slicing wafer thin veneers a breeze.
*Does not include blade*Please see our accessories for blade options.
w w w. t r e n d t i m b e r s . c o m . a u
Laguna 18” Bandsaw LT 18 3000LT*B/SAW18-3000
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
TECHNICAL INFORMATION
Motor: 3HP 1 Phase
Resaw capacity: 385mm
Throat: 440mm
Min-Max blade width: 3.0—31.75mm (1/8”-1 1/4”)
Dust Ports: 2 x 100mm
Cast Table Size: 510 x 510mm
Nitrogen cylinder table tilt
Blade Length: 3685mm
Table Height: 900mm
Overall Height: 1875mm
Gross Weight: 254kg
Net Weight: NW 238kg
w w w. t r e n d t i m b e r s . c o m . a u
Meet the ‘senior’ member of our Bandsaw family the LT18
3000 Series that has been designed to improve your
performance.
All of the Laguna innovations are included, such as the
patented and award winning Laguna Ceramic Guides,
massive three horsepower motor, rack and pinion tilt
system to tilt the table and counter balanced with a gas
spring.
*Does not include blade*Please see our accessories for blade options.
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Planer 16” ShearTec IILT*THICK-16/1
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Depth of cut digital readout with tape backup
ShearTec ll helical cutter head
Mechanical adjustment of bed
Mechanical adjustment of bed rollers
2 cast iron extension tables
2 polished steel rollers for material return
Internal caster system for mobility
TECHNICAL INFORMATION
Width of cut: 400mm (16”)
Motor: 3 HP,1 PH
Table: 1400 X 400mm including 2 x extensions
6 Rows of 18 helical knives = 108 total
2 Feed Speeds: 4.8 & 6.0 metres / min
Dust-hood: 100mm
Max removal: 3mm (1/8”) per pass
Min-Max: 4.8—153mm (3/16” – 6”)
Dimensions: 875 x 1400 x 1125mm high
Net Weight: 258 kg
Gross Weight: 304 kg
w w w. t r e n d t i m b e r s . c o m . a u
With optional keypad lockout system fitted
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Planer 20” 4 Post Planer
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Depth of cut digital readout with tape backup
Table: 1442 x 508mm wide including 2 x extensions
6 rows ShearTec II helical cutterheads with four sided German carbide knife inserts
Mechanical adjustment of bed
Mechanical adjustment of bed rollers
2 Cast iron extension tables
2 Steel rollers for material return
Internal caster system for mobility
TECHNICAL INFORMATION
Width of cut: 500mm (20”)
Motor: 3 HP, 1 PH | 5 HP, 3 PH
6 rows of 23 helical knives = 138 total knives
2 x feed speeds: 4.8 & 6.0 metres / min
125mm dust hood
Max removal: 3mm per pass
Min-Max depth of cut: 4.8mm – 203mm (3/16” – 8”)
Overall dimensions with cast iron extension tables installed: 990 x 1524 x 1143mm high
Net Weight: 399kg
Gross Weight: 449kg
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Planer 20” HD PlanerLT*THICK-20HD/3
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
500mm (20”) width of cut
Depth of cut digital readout with tape backup
6 rows ShearTec II helical cutterheads with four sided German carbide knife inserts
Mechanical adjustment of bed
Mechanical adjustment of bed rollers
Fully enclosed cabinet
TECHNICAL INFORMATION
Motor: 10 HP, 3 PH
6 rows of 23 helical knives = 138 total knives
2 x feed speeds: 4.8 & 6.0 metres / min
125mm dust hood
Overall dimensions with cast iron extension tables installed: 990 x 1575 x 1170mm high
Weight: 544kg
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Planer 25” HD ThicknesserLT*THICK-25IND3
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Solid cast Sheartec II helical head with four-sided insert tooling,
Built with digital readout & simple PC controller
Segmented infeed roller with segmented chip breakers
Infeed & outfeed rollers are supported by four large & sealed needle bearings for long life
Table rollers built with a quick-set lever to raise & lower the table
Heavy cast iron frame & extra wide side panels with gibs
Large precision ground table contains two adjustable table rollers
3 speed feed selector allows quick feed rate changes
10 pieces 4-sided carbide inserts with 10 screws & 2 screwdrivers
Ø150mm / Ø127mm dust port adaptor
4 foot pads
TECHNICAL INFORMATION
Motor: 11100W/415V (3PH -15HP)
Max planning width: 635mm
Planning thickness: 4-230mm
Max chip removal: 6mm
Feed speed: 6, 8, 10m/min
Segmented infeed roller dia.: 76mm
Steel outfeed roller dia.: 65mm (x2)
Bed rollers: 2
Table size: 820 x 660mm
Max work piece length: 250mm
Cutter block speed: 5000RPM
Cutter block dia.: 86mm
No. of knives helical head: 174
Weight: 720Kgs
Dimensions: 1320 x 915 x 1500mm
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
Laguna 6” JointerLT*JOINTER-6/1
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
3 High Speed Steel blades
1422mm long bed allows for longer work pieces
Enclosed steel stand
In-feed table adjustment wedge bed with lever
TECHNICAL INFORMATION
Motor 1.5 HP
Single phase Cutter-Head: 5000 RPM
Cutting Width: 150mm
Cutting Depth: 12.5mm
3 HSS Blades
Cutter-Head Diameter: 60mm
Table Dimensions: 150 X 1422mm
Fence Dimensions: 100 X 736mm
Fence Tilt: 90° & 45° with Positive Stop
Table Height: 805mm
Dust port: 100mm
w w w. t r e n d t i m b e r s . c o m . a u
w w w. t r e n d t i m b e r s . c o m . a u
LT*JOINTER-6/1H
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
6 row ShearTec II helical cutterhead Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips
42 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing
Inserts are slightly angled to give a shear type cut with low impact and less kick-back
Insert leading edge crowned to prevent lines appearing
6 rows of cutters in each head for premium results
1422mm long bed allows for longer work pieces
Enclosed steel stand
In-feed table adjustment wedge bed w lever
TECHNICAL INFORMATION
Motor 1.5 HP
Single phase Cutter-Head: 5000 RPM
Cutting Width: 150mm
Cutting Depth: 12.5mm
4 Sided Solid Carbide
6 Rows X 7 = 42 inserts
Cutter-Head Diameter: 60mm
Table Dimensions: 150 X 1422mm
Fence Dimensions: 100 X 736mm
Fence Tilt: 90° & 45° with Positive Stop
Table Height: 805mm
Dust port: 100mm
w w w. t r e n d t i m b e r s . c o m . a u
Laguna 6” ShearTec II Jointer
w w w. t r e n d t i m b e r s . c o m . a u
LT*JOINTER-8/1W
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Oversized table give maximum support for long work pieces
Precision ground cast in and out feed tables feature independent adjustment on dovetail ways
Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips
Inserts are slightly angled to give a shear type cut with low impact and less kick-back action
54 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing
Inserts leading edge crowned to prevent lines appearing
6 rows of cutters in each head for premium results
Enclosed steel stand
TECHNICAL INFORMATION
Motor: 2HP single phase 10A
Cutter-Head: 5600 RPM
Fence Tilt: 45 Degree. 90 ° & 45 ° positive stop
Width of cut: 200mm
Depth of cut: 12.5mm
Rabbeting capacity: 12.5mm
4 Sided carbide inserts 6 Row X 9 = 54
Cutter-Head Diameter: 75mm
Table Dimensions: 228 x 1803mm
Fence Dimensions: 120 X 1009mm
Table height: 800mm
Weight: 231kg
Dust port: 100mm
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Jointer 8” Wedgebed Jointer with Shear-Tec
Oversized table give maximum support for long
work pieces.
Precision ground cast in and out feed tables
feature independent adjustment on dovetail ways
Deep gullets in the head allow chips to exit fast &
keep the machining area clear of chips.
Inserts are slightly angled to give a shear type cut
with low impact and less kick-back action.
w w w. t r e n d t i m b e r s . c o m . a u
LT*JOINTER-8/1
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Adjustment: Parallelogram with crank allows the table to move in the same arc as the cutter-head when raised or lowered, keeping clearance to a minimum.
6 row Shear Tec II helical cutter-head for premium results
Deep gullets in the head allow chips to exit fast and keep the machining area clear of chips
54 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing
Inserts angled to give a shear cut with low impact and less kick-back action—edge crowned to prevent lines appearing Built in mobility wheels with locking screws
Fully enclosed steel cabinet protects motor and mechanics
2108mm long bed allows for very long work pieces
TECHNICAL INFORMATION
Bed length: 2108mm
Motor: 3 HP single Phase, 15 Amp
Cutter head: 5200 RPM
Cutter-head diameter: 75mm
4 sided carbide inserts 6 rows x 9 = 54
Width of cut: 200mm
Fence Tilt: 90° & 45° with Positive Stop
Table dimensions: 2108 x 200mm
Fence dimensions: 914 x 127mm
Table height : 838mm
Dust port: 100mm
Overall dimensions: 2108 x 635 x 1193mm
Weight: gross 319kg, net 248kg
w w w. t r e n d t i m b e r s . c o m . a u
Laguna 8” Parallelogram Jointer with Shear-Tec
w w w. t r e n d t i m b e r s . c o m . a u
LT*12”L/BEDJOIN
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Adjustment: Parallelogram with crank allows the table to move in the same arc as the cutter-head when raised or lowered, keeping clearance to a minimum.
6 row Shear Tec II helical cutter-head for premium results
Deep gullets in the head allow chips to exit fast and keep the machining area clear of chips
84 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing
Inserts angled to give a shear cut with low impact and less kick-back action
Edge crowned to prevent lines appearing
Built in mobility wheels with locking screws
2210 x 305mm bed allows for very large work pieces
Fully enclosed steel cabinet protects motor and mechanics
TECHNICAL INFORMATION
Bed size: 2210 x 305mm
Motor: 3 HP 1 Phase or 5 HP 3 Phase
Cutter head: 5500 RPM
Cutter head diameter: 100mm (4”)
4 sided carbide inserts 6 rows x 14 = 84
Width of cut: 300mm
Rabbeting capacity: 19mm
Fence Tilt: 90°, 45° & 135°
Positive stops: 90° & 45°
Fence dimensions: 1524 x 137 mm
Table height : 838mm
Dust port: 152mm
Overall dimensions: 2235 x 838 x 1130mm
Gross Weight: 488kg
Net Weight: 399kg
w w w. t r e n d t i m b e r s . c o m . a u
Laguna 12” Parallelogram Jointer with Shear-Tec
Choice of 3 HP Single Phase or 5 HP Phase Three motor.
w w w. t r e n d t i m b e r s . c o m . a u
LT*S/MOULDER/3
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
PRODUCT FEATURES
Standard digital readout
Heavy duty motor
Quick change poly-groove belt system
Each full revolution of the turn handle gives an exact 1.5mm adjustment to the fence
Pre-drilled holes to accept most power feeders
Wheel kit built right into the machine base
TECHNICAL INFORMATION
Motor: 7 1/2 HP 3 Phase 415V
Table size: 998 X 798 X 89mm
Spindle travel: 101mm
Spindle size: 19mm and 31mm
Spindle speeds: 5000 / 7000 / 10000 RPM
Table opening diameter: 185mm
Direction: forward / reversing switch
Fence: micro adjustment
Net Weight: 290kg
Ship Weight: 326 kg
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Pro Spindle Moulder
w w w. t r e n d t i m b e r s . c o m . a u
LT*LATHE24-36
TREND TIMBERSOne Stop Woodworking
Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756
Laguna tools is leading the Revo-lution in lathes. The new
generation lathe has more mass than an other machine in
its class, less vibration and a revolutionary servo motor drive
system for much higher torque in low RPM.
Expect the REVO to exceed your expectations.
TECHNICAL INFORMATION
Motor Power: 3HP single phase reversible
Swing over bed: 609mm
Distance between centres: 900mm
Swing over tool rest base: 508mm
RPM: 200—3500 (high) / 50-820 (low)
Floor to spindle centre height: 1117mm
Maximum outboard turning swing: 863mm
Spindle size: 1-1/4 x 8(RH) TPI
Spindle bore: 16mm / 5/8”
Hole through tailstock: 9.5mm / 3/8”
Tailstock quill travel: 115mm
Tool rest width: 355mm
304mm cast extension with swing away park system
Face Plate: 75mm
Net Weight: 349kg
Ship Weight: 408 kg
w w w. t r e n d t i m b e r s . c o m . a u
Laguna Lathe REVO 24 x 36 – 3HP