1

TRAILED FIELD SPRAYERALBATROS

2

The crops on our fields form the basis of our food. As a farmer, your success therefore depends on healthy crops, and this is why you implement sustain-able, efficient and environmentally friendly crop cultivation practices. LEMKEN have the machines and exper-tise available to support you with all your cultivation and crop protection requirements. Our range of powerful field sprayers are specially designed for the needs of your crops and farm to ensure that it is not only your crops but also your profits that yield healthy growth.

LEMKEN Albatros – optimal care for any requirements

With the Albatros 9 series, LEMKEN of-fers the discerning farmer and con-tractor a professional and full-featured trailed field sprayer which best fulfils the requirements for efficient and sus-tainable plant protection under all conditions. The spreading of liquid fer-tilizer and mixtures of plant protection agents and liquid fertilizer is part of the LEMKEN Albatros performance spectrum.

We look after your crops!

3

4

Effectiveness, customisation and true track following!

The Albatros trailed field sprayer, with its numerous equipment options, is perfectly equipped for any operational requirements. Its true-track drawbar steering combines optimum efficiency with outstanding agility, also in chal-lenging row cultures. The Albatros rep-resents proven technology for profes-sional crop care.

The centrepiece of the Albatros is its GRP tank, which is perfectly smooth in-side and therefore easy to clean. The tank is available in volumes from 4000 - 6200 litres. There are also separate in-ternal clean water tanks.

Stable Z-profile booms with working widths from 15 to 39 metres and a wide variety of folding and width section variants allow the implement to be de-ployed in any crop farming conditions. Hoses and width section valves are pro-tected by being located within the boom framework.

The boom support height can be easily adjusted using a transport support sys-tem, allowing it to be adapted to vari-ous tyre and wheel sizes. This ensures that the booms maintains an optimal centre of gravity position.

The Albatros sets new benchmarks – not least in terms of operating comfort. All adjustments of both intake and out-put functions can be made easily, clearly and without any risk of confu-sion.

With numerous practical functions, in-cluding a folding tray with measuring beaker holder next to the inductor and a storage compartment for utensils and small parts, the Albatros proves its user-friendliness down to the last de-tail.

5

Model range at a glance

• MesoSpray – basic operating system for field sprayer control

• GRP tank with a choice of actual volumes of 4,000, 5,180 or 6,240 litres

• two piston diaphragm pumps AR250

• internal FRP clean water tank with approx. 10% of the ca-pacity of the spray tank

• Boom widths from 15 to 39 metres

• Maximum of 9 width sections

• Optional equipment: TankControl (EES Pack 1), CCI.Command SC automatic width Section control and CCI.Command PT parallel tracking system, drawbar ste-ering, boom lighting

• MesoSprayISO – ISOBUS-compatible field sprayer control

• GRP tank with a choice of actual volumes of 4,000, 5,180 or 6,240 litres

• two piston diaphragm pumps AR250

• internal FRP clean water tank with approx. 10% of the ca-pacity of the spray tank

• Boom widths from 15 to 39 metres

• Maximum of 13 width sections

• Optional equipment: CCI.Command SC automatic width Section control and CCI.Command PT parallel tracking sys-tem, DISTANCE-Control automatic boom height control, electronic EES-Pack 1 to 4 water system, electrically switch-able boundary and extension nozzles drawbar steering, boom lighting

Albatros 10 Albatros 12

6

Drawbar suspension, adjusted to the weight of the Albatros, is available as an option.

• This reduces jolts being transmitted between the sprayer and tractor during road transport. Combined with large-volume wheels, this deliv-ers overall good suspension comfort.

• If the brakes are suddenly applied at a high transport speed and with a filled tank, the frame and drawbar are protected from damage.

Attaching and driving

The Albatros features a universal draw-bar that is suitable for top or bottom hitch configurations.

• Several different drawbar eyes are available, also for retrofitting. This enables the Albatros to be connected to a wide range of tractors.

• The universal drawbar features a hy-draulic stand. It is controlled by a double-action tractor control device.

Universal drawbar Drawbar spring suspension

Optionally, the Albatros can be fitted with drawbar steering.

• The proportional steering of the steering drawbar enables true-track following for a wide range of speeds, even in challenging row environ-ments.

• The pivot point of the steered drawbar is well below the tank, thus offering one of the safest steering concepts – particularly on slopes, where the stability of the machine is tested to its limits.

Drawbar steering

7

The Albatros field sprayer features an unsprung rigid axle as standard. Different axle flange sizes and rim off-sets enable fixed track widths of bet-ween 1.55 m and 2.30 m to be achieved, depending on size and configuration.

• Air-suspended axles are optionally available for the Albatros from 1.80 m track width upwards. Load-depend-ent suspension ensures maximum ride comfort. With this axle, the air brake is also controlled in keeping with applicable loads.

The smooth underside of the LEMKEN Albatros favours work in tall-standing crops.

• The large number of available tyre variations ensures optimal soil conservation and efficient crop protection.

• The pumps are positioned to achieve an uninterrupted ground clearance of about 80 cm to protect crops.

The compact dimensions of the Alba-tros make transportation easier, even on overgrown tracks and in confined areas.

• The spraying boom is folded close to the tank so that even overhanging trees do not become an obstacle.

• The boom transport height can be adjusted to different tyre sizes by means of slots at the front and rear. The boom is therefore stowed at the lowest possible centre of gravity for transportation by road, thereby greatly increasing driving stability.

Large ground clearance anda wide selection of tyres

Compact and safe en routeAxles for every track widthand optimum convenience

Operation made easy

The Albatros controls on the left-side of the implement are clearly arranged and easily accessible for operation.

• Selection valve (1) for drawing in external liquids or spray agent.

• Selection valve (2) for drawing in spray agent or clean water.

• Distribution valve (3) for induction, spraying, internal cleaning and purging of residue

• Electric agitator deactivation (4)

• Proportional valves (5) for hopper rinse, agitator, canister cleaning and external cleaning connection

• Proportional valve (6) for the inductor’s extraction injector

• Adjustable self-cleaning filter (7) in the pressure line

Control centre

A spring-supported mechanism quickly moves the large inductor in the Alba-tros into its working position to speed up the induction of crop care products.

• A mist-free hopper rinse system and powerful agitator ensure that crop care products are dissolved thoroughly and inducted without residue.

• The efficient canister rinsing jet, which can be swivelled upwards, thoroughly cleans canisters of all sizes.

• The folding measuring beaker holder prevents accidental spillage of crop care products.

• A cleaning gun for external cleaning is available as an option.

• A separate hand washing tank is accessible directly next to the in-ductor.

Powerful induction hopper

The Albatros 12 is available with electrohydraulic controls to allow additional functions such as DISTANCE-Control to be controlled.

• The tractor then only needs a single-acting spool valve and an unpressurised return or load sensing.

• Additionally, the tractor requires a double-acting control unit for the hydraulic stand

• The hydraulic functions are electrically controlled from the operating unit.

Electrohydraulic control

8

2

4

7

5

6

1 1

3

9

The Albatros 10 is equipped with the CCI 50 terminal with width section box as standard, delivering an intuitive user interface in combination with the MesoSpray software.

• The field sprayer is supplied with power via a battery kit or a three-phase in-cab power supply.

• If required, the terminal can be fitted with a DGPS receiver or tractor-based DGPS signal connection harness.

• When using the terminal with a DGPS signal, automatic width section switching (CCI.Command SC) and parallel tracking assistance (CCI.Com-mand PT) are available via CCI.Apps.

Basic operation for Albatros 10

• Job processing (CCI. Control) in com-bination with different field files and application maps is possible. (TC-Bas & TC-Geo)

• ISOBUS-compatible auxiliary controls such as the LEMKEN multi-function lever, joystick box, width section box or a tractor multi-function joystick can be easily integrated. (AUX-N)

• All CCI terminals allow the connec-tion of up to two cameras (CCI.Cam).

• This allows the CCI terminals to be used for several implements, e.g. field sprayer, seed drill, fertiliser spreader etc.

ISOBUS technology gives access to a greater range of functionality in the Albatros 12 field sprayer. It can be controlled via a CCI 50, a CCI 200 or a CCI 1200 terminal or any AEF-certified ISOBUS terminal. The electrical connec-tion to the implement is provided via the ISOBUS implement socket on the tractor. ISOBUS technology supports numerous functions, e.g.:

• Automatic width Section control can be operated either via a CCI terminal (CCI.Command SC) or via the Section control on the tractor (TC-SC).

• If a CCI terminal is used, parallel tracking assistance can be used as well (CCI.Command PT), enabling trouble-free pass alignment, even on fields without tramlines.

ISOBUS operation for Albatros 12

Width section box Albatros 12

DGPS antenna Albatros 10/12

Joystick box Albatros 12

Multi-function lever Albatros 12

Accessories

10

The new AEF certification label confirms that ISOBUS components have been independently tested and comply with both the ISO 11783 standard and the supplementary AEF Guidelines. All LEMKEN ISOBUS implements are currently certified under the AEF Guidelines when they go into series production. The AEF database provides valuable information regarding the ISOBUS compati-bility of tractors and implements used on farms.

The Agricultural Industry Electronics Foundation was established in October 2008 by seven international manufac-turers of agricultural implements and two associations. The initiative is an in-dependent international organisation. It is a user platform that provides re-sources and expertise for the increased utilisation of electronic and electrical systems in agriculture.

Electronic systems make agricultural implements safer, more powerful, more precise and more efficient. However, in-dividual manufacturers previously de-veloped their own, proprietary solu-tions, which resulted in specific adjust-ments being necessary for each trac-tor/implement combination. ISOBUS is designed as a simpler approach that provides a non-proprietary “plug and play” solution. AEF Guidelines ensure that signals such as speed, lower link position, PTO speed etc. are made available in a standardised form by all implements. Communications between implements and field data are stand-ardised and therefore simplified by means of the ISO-XML format. ISOBUS is one of the core tasks of the AEF.

Universal terminal Provides the ability to control an implement using any terminal or alternatively the ability to use a single terminal for controlling various implements.

Auxiliary Control old Auxiliary control elements according to the old standard

Task Controller basic Documents total values that are helpful for providing an overview of the work done.The relevant values are obtained from the implement.

Task Controller Section control Automatic width Section control depending on the GPS location and required degree of overlap.

Tractor Electronic Control Unit The tractor’s job computer can be used to supply essential tractor data for the implement via ISOBUS, including speed, PTO speed and linkage height, among others. This data can then be used for controlling the implement.

Auxiliary Control new Auxiliary control elements according to the new standard are freely programmable. The “old” and “new” standards are not compatible with each other; LEMKEN implements work under the AUX-N standard.

Task Controller geo-based Additionally provides the ability to collect location-specific data or plan location-specific jobs, for example using application cards.

Agricultural Industry Electronics Foundation

AEF certification label

ISOBUS functionalities

11

CCI.Command comprises the GPS-based PT parallel tracking assistance and the automatic SC width Section control. PT supports precise pass alignment even with poor visibility or on fields without tramlines. The distance to a straight or curved reference line is calcu-lated using GPS and visualised for the driver. SC switches the part width sections of the implement automatically based on its GPS po-sition. This prevents double passes across areas, ensures that farm inputs are used economically and lastingly reduces driver strain.

CCI. Control is your job management tool and forms the interface between the farm management software and the implement con-trol on the CCI terminal. This allows not only the data recorded by your machine to be transferred to other devices or computers, but even entire workflows to be easily controlled and documented. When combined with a GPS signal, jobs can be planned and docu-mented for specific locations, and application maps can be used for width section-specific application. These maps can be imported in either standard ISOXML or Shape format.

CCI.Courier permits wireless data exchange, e.g. via email or online access. For this function, the terminal requires an additional GSM modem including an aerial and SIM card. CCI.Courier is only availa-ble for the CCI 200.

CCI.TECU Many tractors are not yet ISOBUS-ready, but have a signal connector instead. CCI.TECU works with this socket to collect a wide range of tractor data such as speed of travel, PTO speed and linkage position and then shares this data with other bus participants.

CCI.Cam transmits the images recorded by various cameras directly to your terminal, ensuring that you always have an excellent over-view of your machine.

“One for All, All for One”

That was the motto under which the Competence Center ISOBUS e.V. was established by the companies AMA-ZONE, GRIMME, KRONE, KUHN, LEMKEN and RAUCH in 2009 in order to give concrete shape to their idea of collabo-ration between various manufacturers. More than five years of collaborative development of innovative agricultural electronics have delivered sound proof that teamwork works.

CCI terminals are developed by professionals for professional practice. Implements can be controlled regard-less of their manufacturer, without needing to switch terminals. A wide range of CCI.Apps allows functions to be extended and optimally adapted to your needs.

Competence Center ISOBUS CCI – Apps

The design of the Z profile boom deliv-ers optimal protection against damage.

• All supply lines as well as the section width valves are protected in the boom frame.

• The Z-profile enables corrosion-re-sistant spray lines to be routed inside the boom structure.

The boom is attached in the centre with pendulum suspension. It is auto-matically aligned horizontally, irrespec-tive of the position of the running gear.

• On slopes spring stabilisers support the adjustment of the boom to the gradient.

• They also prevent the boom from plunging inwards on the headland.

Central pendulum suspension

The Z profile – torsion- resistant protection

To prevent damage to the nozzles and the boom, the Albatros is equipped with a bumper.

• The boom bumper guard is equipped with a circumferential guard rail and a guard plate for the valves.

Bumper

Boom with ‘Z’ profile

Designation – working width/symmetrically reduced – No. of width sections – Weight (kg) Width section distribution *

Boom with nozzle array and folding points * Alternative section arrangements upon request

FS39/25 -9-B39-2150FS39/25-13-B39-2154

3/4/2x5,5/3/2x5,5/4/31/2/3/3,5/4/4,5/3/4,5/4/3,5/3/2/1

FS36/24 -9-B36 - 2050FS36/24-13-B36 - 2054

2x3/5/5,5/3/5,5/5/2x31/2/3x3/4,5/3/4,5/3x3/2/1

FS33/24 - 9 - B36 - 1960Fs33/24 - 13 - B36 - 1964

1,5/3/5/5,5/3/5,5/5/3/1,51/2/9x3/2/1

FS33/21 -9-B33- 1557FS33/21 -13 -B33 - 1561

2x3/2x4,5/3/2x4,5/2x31/2/2x3/2,5/3,5/3/3,5/2,5/2x3/2/1

FS30/24 - 9-B36- 1850FS30/24-13-B36 - 1854

1/2/5/5,5/3/5,5/5/2/11/2x2/2,5/5x3/2,5/2x2/1

FS30/21 - 9 - B33 - 1436FS30/21 -13 - B33 - 1440

1,5/3/2x4,5/3/2x4,5/3/1,51/2/1,5/2,5/3/3,5/3/3,5/3/2,5/1,5/2/1

FS30/20 - 9 - B30 - 967FS30/20 - 13 - B30 - 971

2x2,5/4/4,5/3/4,5/4/2x2,51/2x2/2x3/2,5/3/2,5/2x3/2x2/1

FS28/20 - 9 - B30 - 952FS28/20 - 11- B30 - 954FS28/20 -13 - B30 - 956

2x2/4/4,5/3/4,5/4/2x21/3x3/2,5/3/2,5/3x3/1

2x1/2/2x3/2,5/3/2,5/2x3/2/2x1

FS27/21 - 9- B33 - 1387FS27/21 - 11- B33 - 1389FS27/21 -13 -B33 - 1391

2x1,5/2x4,5/3/2x4,5/2x1,51/2/2,5/3/3,5/3/3,5/3/2,5/2/1

1/3x2/2x2,5/3/2x2,5/3x2/1

FS27/20 - 9 - B30 - 925FS27/20-11-B30-927

1,5/2/4/4,5/3/4,5/4/2/1,51/3x2,5/3,5/3/3,5/3x2,5/1

FS27/18 - 9 - B27 - 833FS27/18 - 11- B27 - 835FS27/18 - 13 - B27- 837

1,5/3/3,5/4/3/4/3,5/3/1,51/2/7x3/2/1

1/2/2x1,5/5x3/2x1,5/2/1

FS 24/20 - 9 - B30 - 825FS 24/20 - 11- B30 - 827

2/2x2,5/3,5/3/3,5/2x2,5/21/2x2/2,5/3x3/2,5/2x2/1

FS24/18 - 9 - B27 - 796FS24/18 - 11- B27 - 798

2/3/2,5/3x3/2,5/3/21/2/3,5/4/3/4/3,5/2/1

1/2x2/2,5/3x3/2,5/2x2/1

FS 21/18 - 9 - B27 - 771 1/2/5x3/2/1

FS 21/15 - 7 - B21 - 748FS 21/15 - 9 - B21 - 748

7x31/2/5x3/2/1

FS 18/00 - 7 - B27 - 597 FS 18/00 - 9 - B27 - 599

1,5/5x3/1,51/2/1,5/3x3/1,5/2/1

FS 15/00 - 7- B27 - 571,5 1/2/3x3/2/1

12

To ensure parallel adjustment to the ter-rain, each spraying boom features a slope balancer which is actuated from the operator console in the tractor cab.Automatic boom guidance is optionally available for the Albatros 12.

• In the basic version, the booms are controlled directly via the tractor con-trol units. Raising and lowering re-quires a single-action control unit, whereas folding/unfolding requires a double-acting control unit. Slope com-pensation is an electric operation. Electrohydraulic boom operation via the operating terminal is possible as

an option. Slope compensation then takes place hydraulically.

• Slope compensation responds to shifts in the boom’s centre of gravity. The boom retains its full pendulum range even in this adjusted position.

• Slope compensation is operated via a potentiometer; in the Albatros 12 with an electrohydraulic system, slope compensation can optionally also be controlled via DISTANCE-Con-trol.

Working on a slope

DISTANCE-Control automatic boom height control makes spraying in hilly or very uneven terrains substantially easier.

• In very hilly terrain and in case of widely spaced rows it is recom-mended to use 2 distance sensors per boom side.

• When using double flat jet spray noz-zles, it is useful to have the distance sensors attached to extended brack-ets in front of the boom, as this mini-mises the effect of spray mist.

DISTANCE-Control

Designation – working width/symmetrically reduced – No. of width sections – Weight (kg) Width section distribution *

Boom with nozzle array and folding points * Alternative section arrangements upon request

FS39/25 -9-B39-2150FS39/25-13-B39-2154

3/4/2x5,5/3/2x5,5/4/31/2/3/3,5/4/4,5/3/4,5/4/3,5/3/2/1

FS36/24 -9-B36 - 2050FS36/24-13-B36 - 2054

2x3/5/5,5/3/5,5/5/2x31/2/3x3/4,5/3/4,5/3x3/2/1

FS33/24 - 9 - B36 - 1960Fs33/24 - 13 - B36 - 1964

1,5/3/5/5,5/3/5,5/5/3/1,51/2/9x3/2/1

FS33/21 -9-B33- 1557FS33/21 -13 -B33 - 1561

2x3/2x4,5/3/2x4,5/2x31/2/2x3/2,5/3,5/3/3,5/2,5/2x3/2/1

FS30/24 - 9-B36- 1850FS30/24-13-B36 - 1854

1/2/5/5,5/3/5,5/5/2/11/2x2/2,5/5x3/2,5/2x2/1

FS30/21 - 9 - B33 - 1436FS30/21 -13 - B33 - 1440

1,5/3/2x4,5/3/2x4,5/3/1,51/2/1,5/2,5/3/3,5/3/3,5/3/2,5/1,5/2/1

FS30/20 - 9 - B30 - 967FS30/20 - 13 - B30 - 971

2x2,5/4/4,5/3/4,5/4/2x2,51/2x2/2x3/2,5/3/2,5/2x3/2x2/1

FS28/20 - 9 - B30 - 952FS28/20 - 11- B30 - 954FS28/20 -13 - B30 - 956

2x2/4/4,5/3/4,5/4/2x21/3x3/2,5/3/2,5/3x3/1

2x1/2/2x3/2,5/3/2,5/2x3/2/2x1

FS27/21 - 9- B33 - 1387FS27/21 - 11- B33 - 1389FS27/21 -13 -B33 - 1391

2x1,5/2x4,5/3/2x4,5/2x1,51/2/2,5/3/3,5/3/3,5/3/2,5/2/1

1/3x2/2x2,5/3/2x2,5/3x2/1

FS27/20 - 9 - B30 - 925FS27/20-11-B30-927

1,5/2/4/4,5/3/4,5/4/2/1,51/3x2,5/3,5/3/3,5/3x2,5/1

FS27/18 - 9 - B27 - 833FS27/18 - 11- B27 - 835FS27/18 - 13 - B27- 837

1,5/3/3,5/4/3/4/3,5/3/1,51/2/7x3/2/1

1/2/2x1,5/5x3/2x1,5/2/1

FS 24/20 - 9 - B30 - 825FS 24/20 - 11- B30 - 827

2/2x2,5/3,5/3/3,5/2x2,5/21/2x2/2,5/3x3/2,5/2x2/1

FS24/18 - 9 - B27 - 796FS24/18 - 11- B27 - 798

2/3/2,5/3x3/2,5/3/21/2/3,5/4/3/4/3,5/2/1

1/2x2/2,5/3x3/2,5/2x2/1

FS 21/18 - 9 - B27 - 771 1/2/5x3/2/1

FS 21/15 - 7 - B21 - 748FS 21/15 - 9 - B21 - 748

7x31/2/5x3/2/1

FS 18/00 - 7 - B27 - 597 FS 18/00 - 9 - B27 - 599

1,5/5x3/1,51/2/1,5/3x3/1,5/2/1

FS 15/00 - 7- B27 - 571,5 1/2/3x3/2/1

13

The tank – a clean solution

The LEMKEN Albatros tank is made of highly tear-resistant, stable glass fibre-reinforced plastic (GRP).

• Extremely smooth inner surfaces re-duce the deposition of spray agents and enable the interior to be cleaned quickly and easily

• The shape and location of the tank favours optimum weight distribution in all filling states.

• The tank shape in particular is designed to support the highly efficient volume agitator. This design effectively prevents foaming.

• The heart-shaped clean water tank is located in the centre of the main tank and has a capacity of approx. 10% of this tank’s volume. It also acts as a baffle and increases stability on diffi-cult terrain.

Tank as smooth as a mirror and easy to clean

14

The bypass collector, which collects all fluids from up to seven return lines and then transfers them directly to the agi-tator via a collection line is a unique feature of this implement. No power is lost. Any power not used for spraying is used for agitation.

• The number of hoses and supply lines and therefore also the number of required tank connections are re-duced to a minimum.

• Technical residue is thereby reduced considerably.

A powerful agitator inside the tank in-tensively mixes the spray agent and prevents the deposit of any residue. The bypass collector line is connected directly to the agitator line installed in a longitudinal direction in the bottom of the tank.

• This system enables the entire pump capacity to be concentrated on the agitator.

• The powerful hydraulic return agita-tor has a foam-reducing effect and guarantees a homogeneous spray agent throughout the spraying pro-cess.

• The intensity of agitation is infinitely variable via an easy-to-use control device.

• Electric agitator deactivation via the operating terminal is available as an option.

Low amounts of residue Efficient agitator

The two fill level indicators can be read easily both on the implement and from the tractor cab.

• The fill level is measured at the centre of the tank so that the result is largely unaffected if the sprayer is on a slope.

• The electronic fill level indicator is exceedingly useful for precise fill volumes and minimal residues.

• An automatic fill stop can be implemented in combination with an electronic fill level indicator.

Mechanical or electronic fill level indicator

15

16

From filling to cleaning

Enviromentally friendly Enhanced Sprayer Pack (EES Pack)

The optimised liquid route for the Albatros trailed field sprayer from LEMKEN guarantees efficient spreading of all plant protection agents.

• Large-size lines also enable larger spreading rates or high travel speeds.

• The quantity control valve has a wide control range. which enables variable quantities to be spread.

The EES Pack comprises equipment packages that make the implement fu-ture-ready in terms of user safety and environmental protection. The direct control of cleaning processes from the closed cab provides optimal user pro-tection and ensures that the tank can be quickly and easily cleaned internally while still on the field.

• With a nozzle pipe with 2-mm stain-less-steel walls, the nozzle holders are fitted securely.

• The Albatros features a circulation line as standard that reliably delivers homogeneous spray fluid across the full boom width as soon as the noz-zles are activated.

2

1

4

7

6

7

7

7

12 12

11

10

9

5

8

1

3

1 Pumps 2 Selection valve on suction side 3 Main tap 4 Spray pressure control valve 5 Pressure filter flow ratecontrol 6 Flowmeter 7 Section width valves 8 Bypass collector 9 Agitator 10 Washing-in sluice 11 Clear water tank 12 Cleaning nozzles

Spraying

The circulation line

Albatros 10/12 EES Pack 1 TankControl electronic fill level indicator

Albatros 12 EES Pack 2 TankControl electronic fill level indicator

Electrical switching from spray fluid to clean water and vice versa

Electrical switching of internal tank cleaning (on/off )

EES Pack 3 TankControl electronic fill level indicator

Electrical switching from spray fluid to clean water and vice versa

Electrical switching of internal tank cleaning (on/off )

Electrical agitator deactivation

EES Pack 4 TankControl electronic fill level indicator

Electrical switching from spray fluid to clean water and vice versa

Electrical switching of internal tank cleaning (on/off )

Electrical agitator deactivation

Automatic stop of the pump intake connection

EES Pack variants

17

The Albatros trailed field sprayer tank is extremely smooth on the inside and therefore ideally equipped for residue-free internal cleaning.

• The two optimally positioned stainless-steel rotation nozzles in the upper tank section ensure reliable and thorough cleaning of all areas inside the tank.

• Optimised routing of cables inside the tank optimises the smoothness of the interior surface, increasing the cleaning effectiveness.

• Control devices, lines, width section valves and pumps can be cleaned even if the tank is partially filled.

The high pump capacity ensures rapid filling, powerful mixing of the spray fluid and thorough implement clean-ing.

• The pumps are driven directly via the PTO at a maximum speed of 540 rpm. This results in a maximum fill time of 10 to 15 minutes.

• The piston diaphragm pumps are resistant to liquid fertiliser through the use of corrosion-proof materials.

• A hydraulic pump drive with digital speed monitoring directly over the tractor hydraulics is available as an option.

The Albatros filters are easily accessible.

• The Albatros has two suction filters of 50 mesh each (50 mesh per inch). Non-return valves integrated in the suction filters allow the filters to be cleaned even when the main tank is full, without spray fluid escaping from the tank.

• The filter in the pressure line is selfcleaning and features an 80-mesh insert which eliminates the need for nozzle prefilters when nozzles greater or equal to bore 025 are used..

Pumps Filters Internal cleaning

18

Technical data

Standard equipment:

Albatros 10: Electronic operation and automatic control via the LEMKEN CCI 50 terminal, width section box and basic tractor equipment

Albatros 12: Electronic operation and automatic regulation with ISOBUS without a terminal and without auxiliary control elements • basic FS spraying boom operation: hydraulic height adjustment via 1 single-action control unit, folding into transport or working positions is by means of hydraulic sequential control with 1 double-acting control unit, electric slope compensation with optical centre display and potentiometer • vertical spraying boom suspension • piston diaphragm pump 2 x 250 l/min • 340/85 R 48 tyres for Albatros 12/4000, 520/85 R 38 tyres for Albatros 12/5000 and 520/85 R 42 tyres for Albatros 12/6000 • dual-line air pressure brake system • one-lever operation in the distribution area • indirect level indication • 2 rotating stainless steel nozzles for cleaning the inside of the tank • manual agitator control • spring-supported inductor and storage facility with measuring beaker holder • 2“ Kamlok suction connection • integrated clean water tank, approx. 10% of the relevant tank volume • hand washing tank • 1 x storage box on Albatros 12/4000, 2 x storage boxes on Albatros 12/5000 and 12/6000 • drawbar for upper attachment • height-adjustable drawbar eye, Ø 40 mm rigid • hydraulic stand via 1 double-acting control unit • cardan shaft • 1 set of nozzles, TeeJet AIXR VP, size can be selected freely • device testing for 1 set of nozzles incl. official test label • mudguards incl. lighting system • platform with ladder and grab rail

Main tank Clean water tank Hand wash canister Weight

Albatros 10/12 Nominal volume (litres) Actual volume (litres) (litres) (litres) (kg, without boom)

4000 3.800 4.000 380 15 2.500

5000 4.900 5.180 490 15 2.950

6000 5.900 6.240 580 15 3.050

Transport dimensions (mm)Length (L) (to the rear edge of the

centre section)Width (W) Height (H) (to the upper edge of the

power chain)

Albatros 10/12 With boom Min. Max. Min. Max. Min. Max.

4000

B21 5.700 6.000 2.600 2.960 3.300 3.800

B27 5.700 6.000 2.600 2.960 3.300 3.800

B30 6.000 6.300 2.600 2.960 3.300 3.800

B33 6.800 7.100 2.600 2.960 3.400 3.800

5000

B21 6.600 6.900 2.600 3.000 3.300 3.800

B27 7.000 7.200 2.600 3.000 3.300 3.800

B30 7.000 7.200 2.600 3.000 3.300 3.800

B33 7.700 8.000 2.600 3.000 3.400 3.900

B36 7.200 7.500 2.800 3.000 3.400 3.900

B39 7.800 8.100 2.800 3.000 3.400 3.900

6000

B21 6.700 7.000 2.600 3.000 3.400 3.800

B27 7.000 7.300 2.600 3.000 3.400 3.800

B30 7.000 7.300 2.600 3.000 3.400 3.800

B33 7.800 8.100 2.600 3.000 3.400 3.900

B36 7.300 7.500 2.800 3.000 3.400 3.900

B39 7.900 8.200 2.800 3.000 3.400 3.900

3,30 m – 3,90 m 3,30 m – 3,90 m

2,60 m – 3,00 m5,70 m - 8,20 m

19

LEMKEN wearing parts are designed for a maximum service life. High-quality materials, the latest production met-hods, and an intensive quality control ensure a long service life. Therefore, all original spare parts bear a unique iden-tification with the registered LEMKEN trademark. Original spare parts can be ordered at any time online on the Inter-net via the LEMKEN information and or-dering system.

Original spare parts from LEMKEN

Service decides

When you have bought a machine from LEMKEN, the well-known, almost proverbial LEMKEN service starts. 18 customer-oriented factory branches and outdoor storage areas in Germany as well as our own sales companies and importers in more than 40 countries, and a strong dealer network, ensure that machines and spare parts are sup-plied quickly.

If a part is not in stock, it can be delive-red to the customer within 24 hours via the LEMKEN logistics centre which is manned round-the-clock 365 days a year.

Knowledge from the LEMKEN specialist

Well trained customer service technici-ans are available to farmers, contractors and trade, who are using machinery for

the first time, as well as for professional maintenance and repairs. Thanks to re-gular training courses, LEMKEN custo-mer service is always up to date with the latest LEMKEN technology.

A PA

RTO

F US

LEMKEN GmbH & Co. KGWeseler Straße 5 46519 Alpen, GermanyPhone +49 2802 81-0info@lemken.comlemken.com

LEMK

EN . 1

0/18

. 175

0652

/en

All s

pecif

icatio

ns, d

imen

sions

and w

eights

are s

ubjec

t to co

ntinu

ous t

echn

ical d

evelo

pmen

t and

are t

heref

ore no

t bind

ing. T

hewe

ight s

pecif

icatio

ns al

ways

refer

to th

e bas

ic eq

uipme

nt. Su

bject

to ch

ange

.

Your LEMKEN dealer: