TRADE PRODUCTS & SERVICES CATALOGUE PRODUCTS & SERVICES CATALOGUE EFFECTIVE AS OF 1ST JULY 2016 Industry Leaders in the supply Strutural Steel and Aluiniu etalr t esidential e …

TRADE PRODUCTS & SERVICES CATALOGUEEFFECTIVE AS OF 1ST JULY 2016

Industry Leaders in the supply of Structural Steel and Aluminium

Metalwork to Residential Home Builders and Multi-Density

Developers across South East Queensland.

www.networksteel.com.au

23RD EDITION

TRADE PRODUCTS & SERVICES CATALOGUEEFFECTIVE AS OF 1ST JULY 2016Supersedes 22nd Edition dated 01/03/13

3 Enterprise Street, Cleveland, Qld. 4163 P (07) 3821 0424 F (07) 3821 0426 E [email protected]


NETWORK STEEL Home of the Green Beam

Directors Peter McConnell (Managing Director)

Wayne Buchanan (Operations Manager)

Glenn Hitchcock (Light Metalwork Administrator)

Website www.networksteel.com.au

All Sales Enquiries [email protected]

Purchase Orders [email protected]

Key Account Manager –

Residential Structural Steel

[email protected] Ryan Minogue

Metalwork Manager –

Aluminium Products

[email protected] Robert Deans

Installation & Special Projects

Manager – Structural Steel

[email protected] Brett Smith

Key Accounts Manager –

Major Projects

[email protected] Shane Stephenson

Ofice Admin Manager [email protected] Rachel Alcorn

Purchasing Oficer [email protected] Rod Rawding

Workshop Foreman [email protected] Clint Earl

Project Coordinator –

Aluminium Metalwork Division

[email protected] Steve Allan

HR & Payroll Manager [email protected] Kym Perez

Transport Manager [email protected] Mike Oades

OH&S Oficer [email protected] Peter Matthews

Accounts Payable &

Receivable

[email protected] Sharon Good

Antoinette Page

NOTE: All prices are subject to 10% GST

23RD EDITION

Please note: All prices listed herein are subject to change without notice.

All prices are subject to 10% GST1

EFFECTIVE AS OF 1ST JULY 2016




COLUMNS (Duragal)Duragal not available on sizes greater than 100mm sq

Price Per Mtr

SHS Duragal when

available

Standard col. fabrication

Corner upstand

fabrication

Basic cast in col.

fabrication

Basic one end only col. fabrication

Special col. fabrication

P.O.A. P.O.A. P.O.A. P.O.A. P.O.A.

P.O.A 40x40x2.0

P.O.A 50x50x3.0

P.O.A 50x50x4.0

P.O.A 50x50x5.0

P.O.A 65x65x3.0

P.O.A 65x65x4.0

P.O.A 65x65x5.0

P.O.A 65x65x6.0

P.O.A 75x75x2.5

P.O.A 75x75x3.0

P.O.A 75x75x4.0

P.O.A 75x75x5.0*

P.O.A 75x75x6.0

P.O.A 89x89x3.5

P.O.A 89x89x5.0

P.O.A 89x89x6.0*

P.O.A 100x100x3.0

P.O.A 100x100x4.0

P.O.A 100x100x5.0

P.O.A 100x100x6.0*

P.O.A 75x50x3.0

P.O.A 100x50x4.0

P.O.A 125x125x4.0*

P.O.A 150x150x5.0*

P.O.A 200x200x5.0*

The column fabrication designs below are indicative only.

All variations are available in either a duragal or hot dip galvanised inish.

PLEASE NOTE: § Column fabrication rates are inclusive of plates both ends, where applicable.

§ Metre rates listed are inclusive of cutting charges and waste factors.

§ Various other S.H.S. sizes are available - priced on application.

* Not Available in Duragal – Prime Coated Only.

IND

ICA

TIV

E

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

COLUMNS (Hot Dip Galvanized)Duragal not available on sizes greater than 100mm sq

Price Per Mtr

HDG SHS

Standard col. fabrication

Corner upstand

fabrication

Basic cast in col.

fabrication

Basic one end only col. fabrication

Special col. fabrication

P.O.A. P.O.A. P.O.A. P.O.A. P.O.A.

P.O.A 40x40x2.0

P.O.A 50x50x3.0

P.O.A 50x50x4.0

P.O.A 50x50x5.0

P.O.A 65x65x3.0

P.O.A 65x65x4.0

P.O.A 65x65x5.0

P.O.A 65x65x6.0

P.O.A 75x75x2.5

P.O.A 75x75x3.0

P.O.A 75x75x4.0

P.O.A 75x75x5.0

P.O.A 75x75x6.0

P.O.A 89x89x3.5

P.O.A 89x89x5.0

P.O.A 89x89x6.0

P.O.A 100x100x3.0

P.O.A 100x100x4.0

P.O.A 100x100x5.0

P.O.A 100x100x6.0

P.O.A 75x50x3.0

P.O.A 100x50x4.0

P.O.A 125x125x4.0

P.O.A 150x150x5.0

P.O.A 200x200x5.0

The column fabrication designs below are indicative only.

All variations are available in either a duragal or hot dip galvanised inish.

PLEASE NOTE: § Column fabrication rates are inclusive of plates both ends, where applicable.

§ Metre rates listed are inclusive of cutting charges and waste factors.

§ Various other S.H.S. sizes are available - priced on application.

IND

ICA

TIV

E




EXTRAS TO COLUMNS

Holes through SHS or RHS P.O.A.

Std. Midspan Fixing Cleats P.O.A.

Large Midspan Fixing Cleats P.O.A.

Small Handrail Tags P.O.A.

Extra over for mouse hole cut outs P.O.A.

Termite Protection “lead plug” to gal vent holes in column base plate P.O.A.

High speed steel drill bit 13mm titanium nitride coated P.O.A.

Adjustable Post Bracket (Threaded rod style)

SHS material rates all as per pages 1 or 2

Column Fabrication – Complete Assembly Duragal H.D.Galv

Adjustable post bracket c/w standard top plate P.O.A. P.O.A.

Adjustable post bracket c/w corner upstand top P.O.A. P.O.A.

Price Per Item: to suit duragal posts (base assembly only) P.O.A.

Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A.

Adjustable Post Bracket (SHS sleeve stub style)

SHS material rates all as per pages 1 or 2. Available for 50sq, 75sq & 100sq SHS only


Adjustable post bracket c/w standard top plate P.O.A. P.O.A.

Adjustable post bracket c/w corner upstand top P.O.A. P.O.A.

Price Per Item: to suit duragal posts (base assembly only) P.O.A.

Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A.

Adjustable Post Bracket (SHS material sold separately – see rates on pages 1 + 2)

Available for 75sq, 89sq + 100 sq SHS


Adjustable Head bracket c/w standard Base Plate P.O.A. P.O.A.

Head Bracket – Sold Loose for Site Welding P.O.A. P.O.A.

Head Bracket – Shop welded to SHS Post P.O.A. P.O.A.

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

P.O.A P.O.A P.O.A P.O.A




P.O.A P.O.A P.O.A P.O.A

P.O.A P.O.A P.O.A

P.O.A P.O.A P.O.A

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

Sizes$ Per mtr Primed

Including Nail Plate Holes$ Per mtr Primed Excluding Holes

$ Per mtr Extra over Hot Dip Gal

150 UB 14 (14.0) P.O.A. P.O.A. P.O.A.

150 UB 18 (18.0) P.O.A. P.O.A. P.O.A.

180 UB 16 (16.1) P.O.A. P.O.A. P.O.A.

180 UB 18 (18.1) P.O.A. P.O.A. P.O.A.

180 UB 22 (22.2) P.O.A. P.O.A. P.O.A.

200 UB 18 (18.2) P.O.A. P.O.A. P.O.A.

200 UB 22 (22.3) P.O.A. P.O.A. P.O.A.

200 UB 25 (25.4) P.O.A. P.O.A. P.O.A.

200 UB 30 (29.8) P.O.A. P.O.A. P.O.A.

250 UB 26 (25.7) P.O.A. P.O.A. P.O.A.

250 UB 31 (31.4) P.O.A. P.O.A. P.O.A.

250 UB 37 (37.3) P.O.A. P.O.A. P.O.A.

310 UB 32 (32.0) P.O.A. P.O.A. P.O.A.

310 UB 40 (40.4) P.O.A. P.O.A. P.O.A.

310 UB 46 (46.2) P.O.A. P.O.A. P.O.A.

360 UB 45 (44.7) P.O.A. P.O.A. P.O.A.

360 UB 51 (50.7) P.O.A. P.O.A. P.O.A.

360 UB 57 (56.7) P.O.A. P.O.A. P.O.A.

410 UB 54 (53.7) P.O.A. P.O.A. P.O.A.

410 UB 60 (59.7) P.O.A. P.O.A. P.O.A.

460 UB 67 (67.1) P.O.A. P.O.A. P.O.A.

460 UB 75 (74.6) P.O.A. P.O.A. P.O.A.

460 UB 82 (82.1) P.O.A. P.O.A. P.O.A.

530 UB 82 (82.0) P.O.A. P.O.A. P.O.A.

530 UB 92 (92.4) P.O.A. P.O.A. P.O.A.

610 UB 101 (101) P.O.A. P.O.A. P.O.A.

610 UB 113 (113) P.O.A. P.O.A. P.O.A.

610 UB 125 (125) P.O.A. P.O.A. P.O.A.

# For extras to beams below, please refer to page 8

#For mill inish only refer retail cost book

§ Per metre rates noted include all cutting charges & waste factors

§ Prime coat: electric wire brish & one coat green anticorrosive enamel paint - recommended for

concealed applications only

UNIVERSAL BEAMS Home of the Green Beam

23RD EDITION







100 UC 15 (14.8) P.O.A. P.O.A. P.O.A.

150 UC 23 (23.4) P.O.A. P.O.A. P.O.A.

150 UC 30 (30.0) P.O.A. P.O.A. P.O.A.

150 UC 37 (37.2) P.O.A. P.O.A. P.O.A.

200 UC 46 (46.2) P.O.A. P.O.A. P.O.A.

200 UC 52 (52.2) P.O.A. P.O.A. P.O.A.

200 UC 59 (59.5) P.O.A. P.O.A. P.O.A.

250 UC 73 (72.9) P.O.A. P.O.A. P.O.A.

250 UC 89 (89.5) P.O.A. P.O.A. P.O.A.

310 UC 97 (96.8) P.O.A. P.O.A. P.O.A.

310 UC 118 (118) P.O.A. P.O.A. P.O.A.

310 UC 137 (137) P.O.A. P.O.A. P.O.A.

310 UC 158 (158) P.O.A. P.O.A. P.O.A.

# For extras to beams below, please refer to page 8

#For mill inish only refer retail cost book

§ Per metre rates noted include all cutting charges & waste factors

§ Prime coat: electric wire brish & one coat green anticorrosive enamel paint - recommended for

concealed applications only




75 x 40 (6.65) P.O.A. P.O.A. P.O.A.

100 x 50 (9.34) P.O.A. P.O.A. P.O.A.

125 x 65 (13.42) P.O.A. P.O.A. P.O.A.

150 x 75 (17.70) P.O.A. P.O.A. P.O.A.

180 x 75 (20.90) P.O.A. P.O.A. P.O.A.

200 x 75 (22.90) P.O.A. P.O.A. P.O.A.

230 x 75 (25.10) P.O.A. P.O.A. P.O.A.

250 x 90 (35.50) P.O.A. P.O.A. P.O.A.

300 x 90 (40.10) P.O.A. P.O.A. P.O.A.

380 x 100 (55.20) P.O.A. P.O.A. P.O.A.

(PFC BEAMS)PARALLEL FLANGE CHANNEL Home of the Green Beam

UNIVERSAL COLUMNS Home of the Green Beam


TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

LINTELS STITCH WELDED TO U-BEAMS & CHANNELSKgs Per Metre ($) Primed HDG

100 x 100 x 10 Angle Lintel 14.2 P.O.A P.O.A




200 x 10 Flat Lintel 16.1 P.O.A P.O.A

EXTRAS TO U-BEAMS & CHANNELS

Item ($), Value

Plated Splay Cuts To Channels P.O.A

Plated Splay Cuts To U-Beams P.O.A

Notched Ends P.O.A

Two Hole End Plates To Channels P.O.A

Four Hole End Plates To U-Beams P.O.A

Standard Connection Plates P.O.A

X-Large Connection Plates P.O.A

Stiffener Plates P.O.A

Purlin Cleats P.O.A

Shs Stub Column – Shop Welded To Floor Beam Connecting With Garage Beam P.O.A

M12 X 45 Bolt, Nut & Washer Z/P (Gr8.8) P.O.A



Computer Generated Cad Design Fee P.O.A

Hot Dip Galvanizing Standard Service P.O.A

Hot Dip Galvanising Of Less Than 20 Kg P.O.A

Hot Dip Galvanizing Silver Bullet Service P.O.A

Stitch Weld Angle Lintel To Pfc (Hit 50 Miss 200) P.O.A

Shop Weld Pfc Portal (Plus Stiffeners, End Plates, Bolts) P.O.A

Shop Weld Pfc Portal (Plus Stiffeners, End Plates, Bolts) P.O.A

Shop Weld U-B Portal (Plus Stiffeners, End Plates, Bolts) P.O.A

Shop Weld U-B Portal (Plus Stiffeners, End Plates, Bolts) P.O.A




DELIVERY CHARGES (From 1kg to 3 tonnes )

LOCATION

Brisbane - Redland District P.O.A

Brisbane - Other Suburbs P.O.A

South Coast - To Tweed Heads P.O.A

Kingscliffe/Pottsville P.O.A

Byron / Ballina P.O.A

North Coast - To Noosa P.O.A

Ipswich To Toowoomba P.O.A

Regional Towns – Gladstone, Chinchilla Etc P.O.A.

CROSS BRACING

DescriptionSupply Only With Cleats To Ends For Bolted Connection

Supplied and Site Welded

“First Bay” Incl. Travel

Additional Bays

25x25x3 pre-gal SHS incl. waste factor N/A P.O.A P.O.A

16mm round M.S. primed incl. waste factor N/A P.O.A P.O.A

16mm round M.S. galv. c/w turnbuckles P.O.A P.O.A P.O.A

16mm round M.S. galv c/w tension ring P.O.A P.O.A P.O.A

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

FABRICATED BRICK LINTELSPrimed

$ per metreHot Dip Galvanized

$ per metreR4 Rated Coating

$ per metre

100 x 100 x 10 M.S. Angle P.O.A P.O.A P.O.A




150 x 100 x 10 M.S. Angle c/w 90 x 8 FMS Vertical Flange Extension

P.O.A P.O.A P.O.A

Fixing Holes to Above P.O.A P.O.A P.O.A

BRICK LINTELS (Arch Bars )

Flat Metre ($) each per UNITR4 Rated Coating ($) each per UNIT

85 x 7 .900 P.O.A P.O.A

85 x 7 1.000 P.O.A P.O.A

85 x 7 1.200 P.O.A P.O.A

Angle Metre ($) each per UNIT ($) each per UNIT

100 x 100 .900 P.O.A P.O.A

100 x 100 1.200 P.O.A P.O.A

100 x 100 1.500 P.O.A P.O.A

100 x 100 1.800 P.O.A P.O.A

100 x 100 2.100 P.O.A P.O.A

100 x 100 2.400 P.O.A P.O.A

100 x 100 2.700 P.O.A P.O.A

150 x 100 2.100 P.O.A P.O.A

150 x 100 2.400 P.O.A P.O.A

150 x 100 2.700 P.O.A P.O.A

150 x 100 3.000 P.O.A P.O.A

150 x 100 3.300 P.O.A P.O.A

150 x 100 3.600 P.O.A P.O.A

150 x 100 4.000 P.O.A P.O.A

Note: A Brick Lintel cutting charge of $12 would be applied if speciic dimensions are required.




TEE BEAMS (Suitable for Double Skin Brickwork)

Tee Beam Metre $ each per unitR4 Rated Coating

$ each per unit

200 x 8 + 200 x 6 “T” P.O.A P.O.A P.O.A

200 x 8 + 200 x 6 “T” P.O.A P.O.A P.O.A

200 x 8 + 200 x 6 “T” P.O.A P.O.A P.O.A

200 x 8 + 200 x 6 “T” P.O.A $310.25 $514.44

200 x 8 + 200 x 6 “T” P.O.A P.O.A P.O.A

Longspan Tee beam Metre $ each per unitR4 Rated Coating

$ each per unit

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

250 x 10 + 200 x 6 “T” P.O.A P.O.A P.O.A

SPECIAL FREIGHT RATES (Applicable to Lintels & Tee Beams Only)

Brisbane Metro (Minimum 3 Day Call Up) P.O.A

Gold Coast (Minimum 3 Day Call Up) P.O.A

Sunshine Coast (Minimum 3 Day Call Up) P.O.A

RETAINING WALL POSTS (Galvanized)Style / Type 0.9M 1.2M 1.5M 1.8M 2.1M 2.4M 2.7M 3.0M

100 H-Section P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A

100 C-Section P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A

100 x 90° Joiner P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A

100 x 45° Joiner P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A

Note: A Tee beam cutting charge of $22 would be applied if speciic dimensions are required.

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

STRINGERS100x50 RHS Stringers c/w 250mm leg Gross Weight H.D. Galv

1/Pair of 1 tread (3mm BMT) 0.010 P.O.A

















EXTRAS TO STRINGERS

Item Price per Pair

Fixing Plates to Base P.O.A

Fixing Plates on return to landing P.O.A

CAD Detailing to Special Requirements P.O.A

Special Rise – Hand Built out of jig P.O.A




Indicative Pricing for:

INSTALLATION OF STRUCTURAL STEEL TO RESIDENTIAL HOUSING

Half Day Rate

Maximum of 3 Beams and 5 Columns P.O.A

(Includes 2 man team plus Franna Crane & driver)

Extra Over for Slew Crane (up to 30 Ton) P.O.A

Extra Man for Half Day P.O.A

Full Day Rate

Maximum of 6 Beams and 9 Columns P.O.A

(Includes 2 man team plus Franna Crane & driver)

Extra Over for Slew Crane (up to 30 Ton) P.O.A

Extra Man for Full Day P.O.A

Network Steel installation services are offered on the understanding that the following basic requirements are provided.

§ Scaffolding and edge protection by head contractor.§ No allowance for set out, positioning or grouting of cast in bolts.§ Good clean access required in and around site for cranes, trucks, personnel and access equipment.§ Head Contractor to provide grid lines and datum levels sufficient for a set out to proceed.§ U.N.O removal or reinstatement of existing materials is excluded.§ Unless stated all site work to be carried out during standard hours of 7:00am to 4:30pm Monday to Friday§ Road closures and/or protection to power lines by head contractor.

ON-SITE CUTTING & WELDING

Tradesman P.O.A Per hour + travel

Trades Assistant P.O.A Per hour + travel

Note: Minimum Charge In Redlands > 45 Mins P.O.A incl. travel & establishment

Note: Minimum Charge In Brisbane Metro > 45 Mins P.O.A incl. travel & establishment

Note: Minimum Charge, Outer Areas > 45 Mins (I.e. Caboolture/Pine Rivers/Ipswich/Beaudesert)

P.O.A incl. travel & establishment

Note: Minimum Charge Gold Coast > 45 Mins P.O.A incl. travel & establishment

Note: Minimum Charge Sunshine Coast > 45 Mins P.O.A incl. travel & establishment

Onsite Cut + Cap Columns (Incl. Std Vert. Upstand Bkt) P.O.A + travel & establishment

# For extended hours on site, special rates can be negotiated

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

FRAME HARDWARE(see photo gallery page 15)

Item Description QTY Sell Price Ex GST

NET90W33Ø75H Post Support Bracket 90 ‘T’ blade on solid rod bolt down each P.O.A








NETPBS200 Post Blade Stirrup HDG x 200 long each P.O.A



NET180CP (Column Stool) 10mm claw plate each P.O.A

NET-SERV 40sq SHS servery bracket 400x600 each P.O.A

NET-STEP 3mm pressed step tread bracket each P.O.A

NET-150EA150 150x150x10 bracket x 150 long 4/14 dia each P.O.A

NET-150EA200 150x150x10 bracket x 200 long 4/14 dia. each P.O.A

NET-150EA250 150x150x10 bracket x 250 long 4/14 dia. each P.O.A




FRAME HARDWARE

Post Support Brackets

‘T’ Blade on 33Ø Solid

Rod

NET90W33Ø75H

NET90W33Ø150H

NET90W33Ø300H

NET130W33Ø150H

NET130W33Ø300H

NET130W33Ø600H

NET180W33Ø150H

NET180W33Ø300H

Servery Bracket

40sq SHS Duragal

400x600 legs

NET-SERV

Post Blade Stirrup ‘T’

Blade on 33Ø Solid

Rod with Spigot

To Suit min. 130sq Post

NETPBS75

NETPBS200

NETPBS120

Column Stools Cast

in type with 10Ø Claws

To Suit Site Welded Steel Posts

NET180CP

Connection Brackets

Assorted Sizes

NET-150EA150

NET-150EA200

NET-150EA200

Disclaimer: - Many of the designs depicted are not engineered, Network Steel Fabrications recommends that the

purchaser considers the application and consults their engineer where & when certiication is warranted.

TRADE PRODUCTS &

SERVICES CATALOGUE



23RD EDITION

BOLTS TO SUIT FRAME HARDWARE(sold as complete assemblies with bolt, nut and washer)

Item No. Description QTY Sell Price Ex GST

Tru Bolts

G/TRU-B 12/100 Tru Bolt HDG 12/100 (Std Qty per pack 20 off) each P.O.A

M12 Hex Head Bolt, Nut and Washer Assembly

OBM12/100 Hex Head B, N&W 12x100mm HDG (Std Qty per pack 100 off) each P.O.A





M12 Cup Head Bolt, Nut and Washer Assembly

OCBM12/65 Cup Head B, N&W 12x65mm HDG (Std Qty per pack 150 off) each P.O.A










Post Caps

K50MSGBW Square Galvabond Caps 50x50 each P.O.A




Why choose Network Steel for

residential projects?

Lots of good reasons:

§ 24 years in the business

§ Deal directly with one of three working directors

§ 16 page trade catalogue, ideal for budget pricing and

for scheduling of purchase orders

§ Prompt pricing from design drawings.

§ Regular steel industry pricing forecasts

§ Site measure and CAD detail capabilities

§ Daily freight runs throughout South East Queensland

and Northern Rivers

§ Site welding and installation services available upon

request

§ Geared towards servicing all facets of the residential

building industry from the smallest renovation through

to the largest multi density development

Most importantly we are backed by a great team of

individuals who focus on repeat business, developing

long standing relationships and a commitment to

delivering products and services to your expectation.

Adam Dew Projects:

Harts Road, Indooroopilly

Rycon Constructions:

Wellington Street, Manly

Mancorp Quality Homes:

Banksia Beach

STRUCTURAL STEEL to“Residential Applications”


Visit our Website www.networksteel.com.au

Home of the Green Beam




MISSION: To uphold our reputation and act with integrity in the pursuit of remaining at the

forefront of our industry; to build strong relationships with our clients and be

recognised for our reliability and professional attitude; to value the contribution of

our employees and to create an environment where our team can use their individual

strengths & experiences to provide innovative ideas in the construction of quality

Structural Steel and Aluminum Metalwork products and services.

OUR JOURNEY In 1992, four business partners laid the modest, yet unwavering foundations for a

partnership. Today, that enduring partnership has advanced to become Network

Steel & Aluminium - South East Queensland’s largest and most dependable fabricator

of Structural Steel and Aluminium Metalwork to residential applications. Through

innovation and professionalism, our business has evolved from having our original

directors working on the factory loor; to an enterprise that is supported by rigorous

procedures and has a solid business model, which now employs over 75 staff, that

contribute to our ongoing success.

Documents

TRADE PRODUCTS & SERVICES CATALOGUE PRODUCTS & SERVICES CATALOGUE EFFECTIVE AS OF 1ST JULY 2016 Industry Leaders in the supply Strutural Steel and Aluiniu etalr t esidential e …