ISO ST Volume 2

1987

Tools

Second edition

Contents

Reference

ISO 234/1-1983

ISO 234/2-1982

ISO 235-1980D

ISO 236/1-1976

ISO 236/2-1976

ISO 237-1975

ISO 238-1974

ISO 239-1974

ISO 240-1975

ISO 241-1975

ISO 242-1975

ISO 243-1975

ISO 494-1975

ISO 504-1975

ISO 513-1975

ISO 514-1975

Title

Files and rasps — Part 1: Dimensions

Files and rasps — Part 2: Characteristics of cut .

Parallel shank jobber and stub series drills and Morse taper shank drills

Hand reamers

Long fluted machine reamers, Morse taper shanks

Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares

Reduction sleeves and extension sockets for tools with Morse taper shanks

Drill chuck tapers

Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels — Metric series and inch series

Shanks for turning and planing tools — Types and dimensions of the section

Carbide tips for brazing on turning tools

Turning tools with carbide tips — External tools

Parallel shank twist drills — Long series

Turning tools with carbide tips — Designation and marking

Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application

Turning tools with carbide tips — Internal tools .

Volume and page

Vol. 1

1

7

9

22

26

30

35

40

43

52

54

56

60

65

66

69

Vol.2

1) Supersedes ISO 235/1-1975.

V

Reference

ISO 521-1975

ISO 522-1975

ISO 523-1974

ISO 525-1986

ISO 529-1975

ISO/R 603-1967

ISO 603/2-1981

ISO 691-1983

ISO 839/1-1976

ISO 839/2-1977

ISO 866-1975

ISO 883-1985

ISO 1085-1986

ISO 1117-1975

ISO 1173-1975

ISO 1174-1975

Title

Machine chucking reamers with parallel shanks or Morse taper shanks

Special tolerances for reamers

Milling cutters — Recommended range of outside diameters

Bonded abrasive products — General — Designation, marking, ranges of outside diameters and tolerances

Short machine taps and hand taps

Bonded abrasive products — Grinding-wheel dimensions (Part 1)

Bonded abrasive products — Grinding wheel dimensions — Part 2: Cutting-off wheels, type 1

Wrench and socket openings — Metric series — Tolerances for general use

Milling machine arbors with 7/24 tapers — Part 1 : Dimensions

Milling machine arbors with 7/24 tapers — Part 2: Accessories

Centre drills for centre holes without protecting chamfers — Type A

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions

Assembly tools for screws and nuts — Double-ended wrenches — Size pairing

Bonded abrasive products — Grinding-wheel dimensions (Part 2)

Assembly tools for bolts and screws — Hexagon drive ends for power tools

Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches

Volume and page

Vol. 1

71

76

78

80

95

129

139

140

143

148

153

155

162

165

186

189

Vol. 2

VI

Reference Title Volume and page

Vol. 1 Vol. 2

ISO 1180-1983 Shanks for pneumatic tools and fitting dimensions of chuck-bushings

Addendum 1-1985

ISO 1641/1-1978 End mills and slot drills - Part 1 : Milling cutters with parallel shanks

ISO 1641/2-1978 End mills and slot drills - Part 2 : Milling cutters with Morse taper shanks

ISO 1641/3-1978 End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks

ISO 1651-1974 Hardmetal (carbide) core tube drawing plugs — Dimensions

ISO 1684-1975 Wire, bar and tube drawing dies with hardmetal (carbide) core — Specifications

ISO 1703-1983 Assembly tools for screws and nuts — Nomenclature Trilingual edition

ISO 1711-1975 Hand operated wrenches and sockets — Technical specifications

ISO 1832-1985 Indexable inserts for cutting tools — Designation

ISO 1929-1974 Abrasive belts — Designation, dimensions and tolerances

ISO 2220-1972 Hand finishing sticks and oil stones — Dimensions

ISO 2235-1981 Abrasive sheets — Designation, dimensions and tolerances

ISO 2236-1982 Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions

ISO 2238-1972 Machine bridge reamers

ISO 2250-1972 Finishing reamers for Morse and metric tapers, with parallel shanks and Morse taper shanks . . .

194

207

217

221

225

228

233

249

282

286

299

301

302

303

304

308

VII

Reference

ISO 2283-1972

ISO 2284-1976

ISO 2296-1972

ISO 2306-1972

ISO 2336-1980

ISO 2351-1986

ISO 2352-1982

ISO 2380-1979

ISO 2402-1972

ISO 2421-1972

ISO 2422-1986

ISO 2540-1973

ISO 2541-1972

ISO 2568-1973

ISO 2583-1972

ISO 2584-1972

ISO 2585-1972

Title

Long shank machine taps with nominal diameters from 3 to 24 mm and 1 /8 to 1 in

Hand taps for pipe threads for parallel and taper threads — General dimensions and marking . . . .

Metal slitting saws with fine and coarse teeth — Metric series

Drills for use prior to tapping screw threads . . . .

Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm

Screwdriver bits for slotted head screws, with male hexagon drive

Spiral ratchet screwdriver ends

Screwdriver blades for slotted head screws . . . .

Shell reamers with taper bore [taper bore 1 : 30 (included)] with slot drive and arbors for shell reamers

Cylindrical abrasive sleeves — Designation — Dimensions — Tolerances

Truncated cone abrasive sleeves — Dimensions and designation

Centre drills for centre holes with protecting chamfer — Type B

Centre drills for centre holes with radius form — Type R

Hand- and machine-operated circular screwing dies and hand-operated die stocks

Tool shanks and equipment with 7/24 tapers — Collar dimensions

Cylindrical cutters with plain bore and key drive — Metric series

Slotting cutters with plain bore and key drive — Metric series

Volume and page

Vol. 1

311

315

317

320

325

328

330

331

336

341

343

344

346

348

358

359

360

Vol. 2

VIII

Reference

ISO 2586-1985

ISO 2587-1972

ISO 2725-1973

ISO 2726-1973

ISO 2728-1982

ISO 2729-1973

ISO 2730-1973

ISO 2780-1986

ISO 2787-1984

ISO 2804-1973

ISO 2857-1973

ISO 2924-1973

ISO 2933-1974

ISO 2935-1974

ISO 2936-1983

Title

Shell end mills with plain bore and tenon drive — Metric series

Side and face milling cutters with plain bore and key drive — Metric series

Assembly tools for screws and nuts — Power and hand operated square drive sockets — Metric series

Woodworking tools — Metal bodied planes . . . .

Woodworking tools — Plane irons

Woodworking tools — Chisels and gouges

Woodworking tools — Wooden bodied planes .

Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series

Rotary and percussive pneumatic tools — Performance tests

Wire, bar or tube drawing dies — As sintered pellets of hard metal (carbide) — Dimensions...

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion

Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm

Bonded abrasive products — Grinding wheel dimensions (Part 3)

Circular saw blades for woodworking — Dimensions

Assembly tools for screws and nuts — Hexagon socket screw keys — Metric series

Volume and page

Vol. 1

361

363

364

367

369

373

380

384

389

404

411

424

426

432

434

Vol.2

IX

Reference

ISO 2940/1-1974

ISO 2940/2-1974

ISO 2976-1973

ISO 3002/1-1982

ISO 3002/2-1982

ISO 3002/3-1984

ISO 3002/4-1984

ISO 3017-1981

ISO 3109-1984

ISO 3286-1976

ISO 3291-1975

ISO 3292-1975

ISO 3293-1975

ISO 3294-1975

ISO 3295-1975

Title

Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors

Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters . . .

Abrasive belts — Selection of width/length combinations

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers

Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles

Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting

Basic quantities in cutting and grinding — Part 4: Forces, energy, power

Abrasive discs — Designation, dimensions and tolerances Selection of disc outside diameter/centre hole diameter combinations . . .

Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws

Single point cutting tools — Corner radii

Extra long Morse taper shank twist drills

Extra long parallel shank twist drills

Morse taper shank countersinks for angles 60°, 90° and 120° inclusive

Parallel shank countersinks for angles 60°, 90° and 120° inclusive

Narrow bandsaw blades for woodworking — Dimensions

Volume and page

Vol. 1

437

440

443

445

499

534

544

556

558

560

561

564

566

567

568

Vol.2

X

Reference

ISO 3314-1975

ISO 3315-1975

ISO 3316-1975

ISO 3317-1974

ISO 3318-1982

ISO 3337-1978

ISO 3338/1-1977

ISO 3338/2-1985

ISO 3364-1985

ISO 3365-1985K

ISO 3366-1975

Title

Shell drills with taper bore [taper bore 1 : 30 (included)] with slot drive

Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing

Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing

Assembly tools for screws and nuts — Square drive extension hexagon insert, for power socket wrenches

Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads

T- slot cutters with plain or flatted parallel shanks and with Morse taper shanks having tapped hole — Metric series

Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks

Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions

Coated abrasives — General purpose rolls — Any backing — Designation and dimensions . . .

Volume and page

Vol. 1

569

573

575

577

578

579

582

583

585

594

606

Vol.2

1) Supersedes ISO 3365/1-1977 and ISO 3365/2-1980.

XI

Reference Title Volume and page

Vol. 1 Vol. 2

ISO 3367-1975 Coated abrasives — Rolls for widths of 50 mm and greater — Any backing — Designation and dimensions

ISO 3368-1975 Coated abrasives — Cloth rolls up to and including 40 mm width — Designation and dimensions

ISO 3438-1975 Subland twist drills with Morse taper shanks for holes prior to tapping screw threads

ISO 3439-1975 Subland twist drills with parallel shanks for holes prior to tapping screw threads

ISO 3465-1975 Hand taper pin reamers

ISO 3466-1975 Machine taper pin reamers with parallel shanks .

ISO 3467-1975 Machine taper pin reamers with Morse taper shanks

ISO 3685-1977 Tool-life testing with single-point turning tools .

ISO 3855-1977 Milling cutters - Nomenclature Bilingual edition

ISO 3857/1-1977 Compressors, pneumatic tools and machines — Vocabulary — Part 1: General Bilingual edition

ISO 3857/2-1977 Compressors, pneumatic tools and machines — Vocabulary — Part 2: Compressors Bilingual edition

ISO 3857/3-1979 Compressors, pneumatic tools and machines — Vocabulary — Part 3: Pneumatic tools and machines Bilingual edition

ISO 3859-1985 Inverse dovetail cutters and dovetail cutters with parallel shanks

ISO 3860-1976 Bore cutters with key drive - Form milling cutters with constant profile

ISO 3919-1986 Coated abrasives - Flap wheels with shafts -Designation and dimensions

607

608

609

610

611

613

615

XII

Reference

ISO 3920-1976

ISO 3921-1976

ISO 3936-1977

ISO 3937-1985

ISO 3940-1977

ISO 4202-1978

ISO 4203-1978

ISO 4204-1977

ISO 4205-1977

ISO 4206-1977

ISO 4207-1977

ISO 4208-1977

ISO 4228-1986

ISO 4229-1977

ISO 4230-1977

ISO 4231-1977

ISO 4247-1977

Title

Honing stones of square section — Designation and dimensions

Honing stones of rectangular section — Designation and dimensions

Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions

Cutter arbors with tenon drive — Dimensions . .

Tapered die-sinking cutters with parallel shanks

Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

Parallel shank tools — Driving tenons and sockets — Dimensions

Countersinks, 90°, with Morse taper shanks and detachable pilots

Countersinks, 90°, with parallel shanks and solid pilot

Counterbores with parallel shanks and solid pilots

Counterbores with Morse taper shanks and detachable pilots

Detachable pilots for use with counterbores and 90° countersinks — Dimensions

Spanners and wrenches — Spline drive ends for power socket wrenches

Assembly tools for screws and nuts — Single-head engineer's wrenches — Gaps from 50 to 120 mm

Hand- and machine-operated circular screwing dies for taper pipe threads — R series

Hand- and machine-operated circular screwing dies for parallel pipe threads — G series

Jig bushes and accessories for drilling purposes — Dimensions

Volume and page

Vol. 1 Vo l .2

78

79

80

81

84

87

89

91

93

94

95

96

97

100

102

104

106

XIII

Reference

ISO 4248-1978

ISO 4875/1-1978

ISO 4875/2-1978

ISO 4875/3-1978

ISO 5393-1981

ISO 5396-1977

ISO 5407-1981

ISO 5413-1976

ISO 5414/1-1985

ISO 5414/2-1982

ISO 5415-1977

ISO 5419-1982

ISO 5420-1983

ISO 5421-1977

ISO 5429-1977

Title

Jig bushes — Definitions and nomenclature Bilingual edition

Metal cutting band saw blades — Part 1: Definitions and terminology

Metal cutting band saw blades — Part 2: Basic dimensions and tolerances

Metal cutting band saw blades — Part 3: Characteristics relating to each type of blade . . .

Rotary pneumatic assembly tools for threaded fasteners — Performance test

Hardmetal heading dies — Terminology Bilingual edition

As sintered hardmetal pellets used in heading dies — Dimensions and tolerances

Machine tools — Positive drive of Morse tapers.

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

Twist drills — Terms, definitions and types Bilingual edition

Reamers — Terms, definitions and types Bilingual edition

Ground high speed steel tool bits

Coated abrasives — Flap wheels with incorporated flanges or separate flanges — Designation and dimensions

Volume and page

Vol. 1 Vol.2

115

126

134

136

142

153

160

164

165

167

171

173

191

211

213

XIV

Reference

ISO 5468-1977

ISO 5608-1980

ISO 5609-1985

ISO 5610-1985

ISO 5611-1981

ISO 5742-1982

ISO 5743-1982

ISO 5744-1983

ISO 5745-1982

ISO 5746-1982

ISO 5747-1984

ISO 5748-1982

ISO 5749-1982

Title

Rotary percussive masonry drills with hardmetal tips — Dimensions

Turning and copying tool holders and cartridges for indexable (throwaway) inserts — Designation

Boring bars for indexable inserts — Dimensions

Single point tool holders for turning and copying, for indexable inserts — Dimensions . . .

Cartridges, type A, for indexable inserts — Dimensions

Addendum 1-1986

Pliers and nippers — Nomenclature Trilingual edition

Addendum 1-1985 Trilingual edition

Pliers and nippers — General technical requirements

Pliers and nippers — Methods of test

Pliers and nippers — Pliers for gripping and manipulating — Dimensions

Pliers and nippers — Engineer's and lineman's pliers — Dimensions

Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions

Pliers and nippers — End cutting nippers — Dimensions

Addendum 1-1984

Pliers and nippers — Diagonal cutting nippers — Dimensions

Addendum 1-1984

Volume and page

Vol. 1 Vol. 2

214

216

226

229

235

241

244

260

264

265

270

275

278

282

287

288

291

XV

Reference

ISO 5941-1979

ISO 5967-1981

ISO 5968-1981

ISO 5969-1979

ISO 6103-1986

ISO 6104-1979

ISO 6106-1979

ISO 6108-1978

ISO 6168-1980

ISO 6261-1984

ISO 6262/1-1982

ISO 6262/2-1982

ISO 6462-1983

ISO 6544-1981

ISO 6751-1986

ISO 6752-1984

Title

Compressors, pneumatic tools and machines — Preferred pressures

Taps and thread cutting — Nomenclature of the main types and terminology Trilingual edition

Circular screwing dies — Terminology

Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion

Bonded abrasive products — Static balancing of grinding wheels — Testing

Abrasive products — Diamond or cubic boron nitride grinding wheels and saws — General survey, designation and multilingual nomenclature

Abrasive products — Grain sizes of diamond or cubic boron nitride

Double equal angle cutters with plain bore and key drive

Abrasive products — Diamond or cubic boron nitride grinding wheels — Dimensions

Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation

End mills with indexable inserts — Part 1: End mills with flatted parallel shank

End mills with indexable inserts — Part 2: End mills with Morse taper shank

Face milling cutters with indexable inserts — Dimensions

Hand-held pneumatic assembly tools for installing threaded fasteners — Reaction torque and torque impulse measurements

Ejector pins with cylindrical head — Dimensions

Round punches with 60° conical head and straight shank

Volume and page

Vol. 1 Vol. 2

292

295

317

321

329

334

348

354

355

370

376

377

378

385

392

394

XVI

Reference

ISO 6753-1982

ISO 6787-1982

ISO 6788-1982

ISO 6789-1982

ISO 6986-1983

ISO 6987/1-1983

ISO 7079-19811)

ISO 7226-1985

ISO 7294-1983

ISO 7406-1986

ISO 7755/1-1984

ISO 7755/2-1984

ISO 7755/3-1984

ISO 7755/4-1984

Title

Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions

Assembly tools for screws and nuts — Adjustable wrenches — Width across flats up to 50 mm

Assembly tools for screws and nuts — Four-way socket wrenches

Assembly tools for screws and nuts — Torque wrenches — Torque ranges and tolerances . . . .

Side and face milling (slotting) cutters with indexable inserts — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7° normal clearance

Core drills with parallel shanks and with Morse taper shanks

Dimensions af hexagonal dienuts

Saw teeth for woodworking saws — Profile shape — Terminology and designation Bilingual edition

Bore type milling cutters for indexable inserts — Designation

Hardmetal burrs — Part 1: General specifications

Hardmetal burrs — Part 2: Cylindrical burrs (style A)

Hardmetal burrs — Part 3: Cylindrical round-(ball-) nose burrs (style C)

Hardmetal burrs — Part 4: Spherical burrs (style D)

Volume and page

Vol. 1 Vol.2

397

398

400

403

406

407

417

421

424

434

440

444

445

446

1) Supersedes ISO 235/2-1972.

XVII

Reference Title Volume and page

Vol. 1 Vol. 2

ISO 7755/5-1984

ISO 7755/6-1984

ISO 7755/7-1984

ISO 7755/8-1984

ISO 7755/9-1984

ISO 7755/10-1984

ISO 7755/11-1984

ISO 7755/12-1984

ISO 7848-1986

ISO 7855-1985

ISO 8017-1985

ISO 8018-1985

ISO 8020-1986

ISO 8021-1986

ISO 8404-1986

ISO 8405-1986

ISO 8486-1986

Hardmetal burrs — Part 5: Oval burrs (style E) ..

Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)

Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)

Hardmetal burrs — Part 8: Flame burrs (style H)

Hardmetal burrs - Part 9: 60° and 90° cone burrs (style J and K)

Hardmetal burrs — Part 10: Conical round-(ball-) nose burrs (style L)

Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)

Hardmetal burrs — Part 12: Inverted cone burrs (style N)

Shank type milling cutters for indexable inserts — Designation

Torque wrenches — Test method

Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered

Mould guide bushes, headed, and locating guide bushes, headed

Punches with cylindrical head and reduced shank

Round punches with cylindrical head and straight shank

Angle pins — Basic dimensions

Ejector sleeves with cylindrical head — Basic series for general purposes

Bonded abrasives — Grain size analysis — Designation and determination of grain size distribution of macrogrits F4 to F220

XVIII