5
Telephone: (450) 441-5408 www.caesalabinc.com TM SEDI-RATE E.S.R. SYSTEM Westergren method Easy to use Closed system for optimal safety Shatter-proof plastic components Accurate and reproducible results Patented pierceable stopper Fibrous barrier protects user from hazardous aerosols The Erythrocyte Sedimentation Rate (ESR) is a non-specific test that alerts physicians to the possible presence of disease or abnormality in the body. The ESR is determined by measuring, in millimeters per hour, the distance red cells have fallen after separating from the plasma in a vertical sed-rate pipette. Sedi-Rate offers a simple, safe, economical and highly-accurate method for performing Westergren ESR determinations. The polystyrene Sedi-Rate pipette is graduated from 0 to 180mm and features a unique fibrous plug located at the zero mark. The plug is specifically designed to be a self-sealing aerosol barrier that stops hazardous substances from escaping through the top of the pipette. The polypropylene Sedi-Rate vial features a patented self-sealing stopper that is easily pierced with a transfer pipette or piercing funnel. The vial is supplied pre-filled with 0.25mL of 3.8% trisodium citrate diluent. Simply add 1 mL of EDTA-treated blood to complete the 1 to 4 ratio as required by the Westergren method. Sedi-Rate and other Globe ESR products are the only systems that are completely closed, thereby offering the highest degree of safety. The use of Sedi-Rate eliminates splashing, spraying and aerosol hazards, making it an optimum choice for ESR testing in the laboratory. Item # Description Unit 3469 Sedi-Rate ESR System, 100 tests per box 100 3469B Sedi-Rate ESR System, 1000 tests per case 1000 (100/box, 10 boxes/case) 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-place rack with pipette support clamps, leveling platform, 100 piercing funnels and 100 ESR transfer pipettes Case 3452 10-place rack with pipette support clamps Each 3472 10-place polystyrene rack Each 3459 Acrylic leveling platform Each 3475 Piercing funnels 200 3476 ESR transfer pipettes 500 ESR Systems

TM SEDI-RATE E.S.R. SYSTEM - Caesa Lab Inc. Systems.pdf · 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-placerack with pipette support clamps, leveling

  • Upload
    voliem

  • View
    220

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TM SEDI-RATE E.S.R. SYSTEM - Caesa Lab Inc. Systems.pdf · 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-placerack with pipette support clamps, leveling

T e l e p h o n e : ( 4 5 0 ) 4 4 1 - 5

TM

SEDI-RATE E.S.R. SYSTEM

Westergren m

Easy to use

Closed syste

Shatter-proof

Accurate and

Patented pier

Fibrous barrie

The Erythrocyte Sedimentation Rate (ESpossible presence of disease or abnormain millimeters per hour, the distance redvertical sed-rate pipette.

Sedi-Rate offers a simple, safe, economWestergren ESR determinations.

The polystyrene Sedi-Rate pipette is gradplug located at the zero mark. The plug isthat stops hazardous substances from esca

The polypropylene Sedi-Rate vial featurewith a transfer pipette or piercing funnetrisodium citrate diluent. Simply add 1 mLrequired by the Westergren method.

Sedi-Rate and other Globe ESR producthereby offering the highest degree of safeand aerosol hazards, making it an optimum

Item # Description3469 Sedi-Rate ESR System, 100 t3469B Sedi-Rate ESR System, 1000

(100/box, 10 boxes/case)3467 Sedi-Rate ESR System Starte

and vials, 10-place rack with pipeplatform, 100 piercing funnels

3452 10-place rack with pipette supp3472 10-place polystyrene rack3459 Acrylic leveling platform3475 Piercing funnels

3476 ESR transfer pipettes

E

4 0 8 w w

ethod

m for optimal safety

plastic components

reproducible results

ceable stopper

r protects user from hazardous aerosols

R) is a non-specific test that alerts physicians to thelity in the body. The ESR is determined by measuring,cells have fallen after separating from the plasma in a

ical and highly-accurate method for performing

uated from 0 to 180mm and features a unique fibrousspecifically designed to be a self-sealing aerosol barrierping through the top of the pipette.

s a patented self-sealing stopper that is easily piercedl. The vial is supplied pre-filled with 0.25mL of 3.8%of EDTA-treated blood to complete the 1 to 4 ratio as

ts are the only systems that are completely closed,ty. The use of Sedi-Rate eliminates splashing, sprayingchoice for ESR testing in the laboratory.

Unitests per box 100tests per case 1000

r Kit: 100 Sedi-Rate pipettestte support clamps, leveling

and 100 ESR transfer pipettes

Case

ort clamps EachEachEach

200

500

SR Systems

w . c a e s a l a b i n c . c o m

Page 2: TM SEDI-RATE E.S.R. SYSTEM - Caesa Lab Inc. Systems.pdf · 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-placerack with pipette support clamps, leveling

T

e l e p h o n e : ( 4 5 0 ) 4 4 1 - 5 4 0 8

TM

SEDIGREN E.S.R. SYSTEM

Westergren m

Unique pipetteformation

Easy to use

Completely c

Accurate and

Shatter-proof

SedigrenTM offers a unique approach todeterminations.

The polystyrene SedigrenTM pipette is gradpiston is designed to use a syringe-like actipossibility of air bubble and aerosol formation

The polypropylene SedigrenTM vial featuresfilled with 0.25mL of 3.8% trisodium citrate d

To perform the ESR test, simply add 1 mLpipette through the stopper and push to thepipette down, pull up on the plastic pistonat its prescored mark leaving a residual smillimeters directly from the imprinted scale

The use of SedigrenTM eliminates splashing,ESR testing in the laboratory.

Item # Description3450 Sedigren ESR System, 13452 10-place rack with pipett3472 10-place polystyrene rac3459 Acrylic leveling platform3476 ESR transfer pipettes

E

w w w . c a e s a l a b i n c . c o m

ethod

eliminates user error and air bubble

losed system for optimal safety

reproducible results

plastic components

performing simple, safe, economical and highly accurate Westergren ESR

uated from 0 to 160mm and features a special piston located inside the pipette. Theon to draw the blood up to the zero mark. This method eliminates user error and the.

a removable stopper that is easily pierced with a transfer pipette. The vial is supplied pre-iluent.

of EDTA-treated blood into the SedigrenTM vial and invert several times to mix. Insert thebottom of the vial. Place the test unit in the appropriate rack. Then, while holding the

until the blood reaches the zero mark. If desired, continue pulling until the piston snaps offafety plug in the pipette. At the end of 60 minutes, the numerical results are read inon the pipette.

spraying and aerosol hazards, making it an optimum choice for

Unit

00 tests per box 100e support clamps Eachk Each

Each500

SR Systems

Page 3: TM SEDI-RATE E.S.R. SYSTEM - Caesa Lab Inc. Systems.pdf · 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-placerack with pipette support clamps, leveling

T e l e p h o n e : ( 4 5 0 ) 4 4 1 - 5 4 0 8 w w w . c a e s a l a b i n c . c o m

TM

PEDI-RATE E.S.R. SYSTEM

Westergren method

Ideal for pediatric and elderly patients

Requires only 0.32mL of blood

50 minute test

Closed system for optimal safety

Accurate and reproducible results

Fibrous barrier protects user from hazardousaerosols

Pedi-RateTM offers a simple, safe, economical and highly-accurate method for performingWestergren ESR determinations on children and the elderly, or wherever low volumes of bloodare obtained.

The polystyrene Pedi-RateTM pipette is graduated from 0 to 170mm and features a unique fibrousplug located at the zero mark. The plug is specifically designed to be a self-sealing aerosol barrierthat stops hazardous substances from escaping through the top of the pipette.

The polypropylene Pedi-RateTM vial features a patented self-sealing stopper that is easily piercedwith a transfer pipette. The vial is supplied pre-filled with 0.08mL of 3.8% trisodium citrate diluent.

To perform the ESR test, simply add 0.32mL of EDTA-treated blood into the Pedi-RateTM vial to theindicator line. Invert several times to mix. Insert the pipette plunger through the pierceablestopper. Then, using continuous force, push the pipette down to the bottom of the vial. The bloodwill automatically rise into the pipette and stop at the zero mark. Place the test unit in the ESR rack(item #3452). At the end of 50 minutes the numerical results are read and recorded in millimetersper 60 minutes directly from the imprinted scale on the pipette.

The use of Pedi-RateTM eliminates splashing, spraying and aerosol hazards, making it anoptimum choice for ESR testing in the laboratory.

Item # Description Unit3490 Pedi-Rate ESR System, 100 tests per box 1003452 10-place rack with pipette support clamps Each3459 Acrylic leveling platform Each3476 ESR transfer pipettes 500

ESR Systems

Page 4: TM SEDI-RATE E.S.R. SYSTEM - Caesa Lab Inc. Systems.pdf · 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-placerack with pipette support clamps, leveling

T e l e p h o n e : ( 4 5 0 ) 4 4 1 - 5 4 0 8 w w w . c a e s a l a b i n c . c o m

TM

EZ-RATE E.S.R. PIPETTE

For direct testing in 13mm blood collection tubes

No need to transfer blood

No additional vials, tubes or transfer pipettesnecessary

Accurate and reproducible results

Fibrous barrier protects user from hazardousaerosols

EZ-Rate offers a simple, safe, economical and highly-accurate method for performing Westergren ESR determinationsdirectly in a 13mm sodium citrate blood collection tube.

The polystyrene EZ-Rate pipette is graduated from 0 to 180mm and features a unique fibrous plug located at the zeromark. The plug is specifically designed to be a self-sealing aerosol barrier that stops hazardous substances fromescaping through the top of the pipette.

To use, simply insert the EZ-Rate pipette into the blood collection tube. Then, using continuous force, push thepipette down to the bottom of the tube. The blood will automatically rise into the pipette and stop at the zero mark. Placethe test unit in the ESR rack (item #3452). At the end of 60 minutes the numerical results are read in millimeters directly from theimprinted scale on the pipette.

Item # Description Unit

3479 EZ-Rate pipettes 1003452 10-place rack with pipette support clamps Each3459 Acrylic leveling platform Each

ESR Systems

Page 5: TM SEDI-RATE E.S.R. SYSTEM - Caesa Lab Inc. Systems.pdf · 3467 Sedi-Rate ESR System Starter Kit: 100 Sedi-Rate pipettes and vials, 10-placerack with pipette support clamps, leveling

T e l e p h o n e : ( 4 5 0 ) 4 4 1 - 5 4 0 8 w w w . c a e s a l a b i n c . c o m

10-PLACE POLYSTYRENE RACKThis rack has been designed for use with the Sedi-Rate and SedigrenTM ESR Systems.

®

Item# Description Unit3472 ESR rack, polystyrene Each

ACRYLIC LEVELING PLATFORM

This durable platform has a leveling bubble and four adjustable feet. It is used in conjunction with ourESR racks to ensure a completely level testing surface.

Item# Description Unit3459 Acrylic leveling platform Each

UnitDescription

ESR Systems

10-PLACE RACK WITH PIPETTE SUPPORT CLAMPS

This unique rack features support clamps that hold the pipettes in a perfectly vertical position. Whenused in conjunction with our acrylic leveling platform (item #3459), you are assured of the mostaccurate results. For use with the Sedi-Rate, Pedi-Rate, EZ-Rate and Sedigren ESR systems.

ESR rack with pipette support clamps Each

Item #3452