T900Tire Changer

Tire Changing Solutions

TM

T900Tire Changer

SpeCifiCaTionS

John Bean is committed to product innovation and improvement. Therefore, specifications listed in this brochure may change without notice. © 2011 Snap-on Incorporated. John Bean is a trademark of Snap-on Incorporated. All Rights Reserved. 09/11 SS3221

Designed for Low-Volume ShopsThe John Bean T900 is designed to meet the tire changing needs of low- volume shops while providing the quality of service only John Bean can provide. This tire changer is constructed with a rugged steel base, polymer valves, a standard lubricator, and can service a wide range of wheel and tire assemblies.

Outer Clamping Diameter Range 10” - 20”Inner Clamping Diameter Range 12” - 22”Maximum Wheel Width 12”Maximum Outer Tire Diameter 39”Compressed Air Supply 120 - 170 PSIBead Breaker Power 2,200 lbs.Bead Breaker Range 3” - 13”Work Area Dimensions (DxWxH) 87” x 41” x 46”Shipping Weight 470 lbs.Power Requirements 120V, 1Ph, 60Hz

John Bean Canada / 6500 Millcreek Drive / Mississauga, Ontario L5N 2W6Customer Service: 1-800-362-4608 / Fax: 905-826-7800

www.johnbean.ca

Snap-on Equipment / 309 Exchange Avenue / Conway, Arkansas 72032 U.S.A.Fax: 501-450-2085 / Toll Free: 1-800-362-4618 / International: 501-505-2739

www.snaponequipment.com/johnbean

features

also available

eeWHUS538a

• Ruggedconstruction-builttolast. • Steelmount/demountheadwithprotectiveinserts. • Cam-operated lock raises themount/demounthead vertically to avoid wheel contact. • Largeadjustmentknoblocksthelateralmovementof the mount/demount head. • Standardlubricator/waterseparatorensureslongvalve life. • Polymervalveseliminaterustandcontamination. • Largedouble-actingbeadbreakercylinder. • On-board pressure-limited inflation with inflation gauge.

imaging Wheel aligners

automotive Lifts Wheel Balancers

TM