Tips on Installing Architectural Mouldings Architectural mouldings are one of the most fastest and affordable ways to significantly enhance the interior design of your home. Architectural mouldings include crown mouldinsg, baseboard mouldings, wainscoting, chair rails and casing on doors as well as windows. There are a variety of different designs and profiles of architectural mouldings that one can choose from and most styles are available prefabricated at your local home improvement store. Those individuals who would like to match existing mouldings may have to work in cooperation with a carpenter or woodshop. However, most will be pleased with the selections available. Determine what type of architectural mouldings you would like to add to your home. You can use the same type or profile of architectural mouldings all the way through your home or use various styles or combinations in each of the rooms. Crown moulding is installed where the wall and the ceiling meet. Base moulding is installed alongside the meeting point of your wall and the floor, wainscoting or chair rails is usually about 42 to 48 inches above the finished flooring and trim. Measure the edges of each room. These measurements will be the length of the architectural mouldings you will need for crown molding, base moulding and wainscoting or chair rails. Determine the height as well as the width of the doors and windows in order to obtain the length of trim or casing required. Purchase the architectural mouldings from your local home improvement store or carpenter using the measurements you noted down earlier. Choose architectural mouldings that do not have any imperfections or flaws, such as cracks or knots. The architectural mouldings will be painted or stained with the intention that discoloration does not affect the final appearance of the architectural mouldings. Cut the length of trim as per the measurements of the walls and openings of the room with the help of a handsaw and a miter box. Cut the corner pieces and laps where two lengths or moulding are attached. Make sure that the cuts are made properly in order to avoid poor connections and overlaps. Next, attach the lengths of architectural mouldings to the wall, windows or doors using carpentry nails at 8 inches apart. Make sure the crown molding, baseboards and trim are even with all surfaces and also ensure that the wainscoting or chair rails are aligned with the baseboards and wall edges. You must be careful not to dent the architectural mouldings when nailing them securely in place. If the architectural mouldings are dented from the impact of the hammer, apply and smooth wood putty to the indentations in the architectural mouldings with the help of a putty knife. For more information on Floor Trim And Moulding, including other interesting and informative articles and photos, please click on this link: Tips on Installing Architectural Mouldings