Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
TiMed
4 Hole Connectors
Double Ended Adapters
Adjustable Adaptors
Tube Clamp Adapters
3 Ear Connectors
4 Ear Connectors
Threaded Rotating Adapters
Internal Adapters
Trans Tibial Kits
Niagara Foot
Grace Plates
IPOS Plates
Gaffney
Ankle Joints
Flexor Joints
837 Sargent Avenue
Winnipeg, Manitoba R3E 0C1 Canada
P. 204.475.3799
F. 204.775.2252
T. F. 877.395.0081
myrdalorthopedics.com
May 2013
THECOMPONENT
ROOMLOWER EXTREMITIES
2
C o n t e n t s
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
4 Canadian Distributor
5 LE Prosthetics – Rated to 99 lbs
5 LE Prosthetics – Rated to 150 lbs
5 LE Prosthetics – Rated to 176 lbs
8 LE Prosthetics – Rated to 220 lbs
9 LE Prosthetics – Rated to 275 lbs
11 LE Prosthetics – Rated to 300 lbs
17 LE Prosthetics – Rated to 350 lbs
17 LE Prosthetics – Rated to 440 lbs
18 LE Prosthetics – Rated to 500 lbs
19 LE Prosthetics – Shuttle Locks
21 LE Prosthetics – Trans Tibial Kits
23 LE Prosthetics – Trans Fermural Kits
24 LE Prosthetics – Feet
27 LE Prosthetics – Pylons
29 LE Prosthetics – Knees
30 LE Prosthetics – Alignment Plates
33 LE Prosthetics – Miscellaneous
34 LE Orthotics – SS Ankle Joints
36 LE Orthotics – Flexures (Child)
37 LE Orthotics – Flexures (Adult)
38 LE Orthotics – Miscellaneous
3
T e r m s o f S a l e
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
PRICES:
All prices are F.O.B. Myrdal Orthopedic Technologies Inc.
location, unless otherwise specified. Taxes are not included
in our pricing and will be added to your invoice if applicable.
Prices will be provided in country of origin and are subject to
change without notice. Custom devices supplied by Myrdal
Orthopedic Technologies Inc. are zero rated for tax purposes if
being supplied from a physician’s prescription. Applicable taxes
in region delivered are the responsibility of the customer. VISA &
Master Cards are accepted.
WARRANTY/REPAIRS:
Custom orthopedic devices fabricated completely (components
included) by Myrdal Orthopedic Technologies Inc. (MOT Inc.) are
warranted for a period of three months from the delivery date.
Articles sent in for non-warranty repair are covered for a period
of two months from the repair date. MOT Inc. will deal with any
manufacturer’s warranty on products supplied by MOT Inc. Any
unauthorized repairs, deviation from directions or modifications
will void the manufacturer’s warranty. Please provide all serial
numbers, purchase date, and our invoice number when making
a claim. Note: All orthopedic appliances sold by MOT Inc. are the
ultimate responsibility of the person or persons, proprietorship
or corporation that supplies the product to the end user. MOT
Inc. will accept no liable responsibilities for products being
dispensed to the aforementioned end user.
NEW ACCOUNTS:
All orders will be shipped C.O.D. unless credit has been
established. To open an account with us please supply three
trade credit references and the name and address of your
financial institution. You will be notified as to your credit status
as soon as possible.
TERMS:
Net 30 days, 1 1/2 % per month service charge on overdue
accounts will be charged. Please refer to our invoice number
with your payment remittance. Credit Card orders can, at the
discretion of MOT Inc. be subject to a 2% handling charge unless
a credit card purchase is indicated at the time of order. While a
purchase order number is not necessary, their use promotes the
capability of accurate tracking shipments and are preferred.
RETURNS:
Authorization for return of regular stock items in saleable
condition must be requested within 2 (Two) days of receipt
of order. Freight expense will be the customer’s responsibility
unless MOT Inc. has made an error. Special order items are not
returnable unless we have made an error in your specifications.
A copy of our invoice or packing slip must accompany all returns.
A re-stocking charge of 25% may apply if deemed necessary by
MOT Inc.
CLAIMS FOR DAMAGES:
These are usually the responsibility of the delivering carrier.
Make sure to save shipping cartons and packing materials for
inspection. Please do not return merchandise but notify us
(not later than 2 (Two) days from receipt of order), and we will
provide you with all the necessary procedures to make a damage
claim.
FOREIGN ACCOUNTS:
Confirmed irrevocable Letter of Credit, Bank Draft, or payment
in full in advance. All orders will be shipped (only) after foreign
checks have cleared the bank.
MINIMUM ORDER:
Our minimum order discretion is Seventy Five dollars. ($ 75.00)
Myrdal Orthopedic Technologies Inc. (MOT Inc.) is pleased
to be able to provide you with quality products for your
prosthetic and orthotic fabrication requirements. Our
products are used on a daily basis in many prosthetic
and orthotic facilities and have proven themselves
internationally.
Please be sure to implement all safety equipment and
procedures when using any of your equipment, failure to
do so may result in a preventable injury.
4
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Canadian Distributor
All 30 and 34 mm Components – 5 mm hex bit required.
All 22 and 25 mm Components – 4 mm hex bit required.
MOT IS YOUR EXCLUSIVE TiMed CANADIAN DISTRIBUTOR
MOT IS YOUR EXCLUSIVE TRS CANADIAN DISTRIBUTOR
MOT IS YOUR EXCLUSIVE Rhythm Foot CANADIAN DISTRIBUTOR
MOT is your source for all:
Grace Fabrication, Gaffney, Uniprox (IPOS), American Prosthetic Components and Fabtech Systems products.
5
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 99 lbs
LE Prosthetics – Rated to 150 lbs
LE Prosthetics – Rated to 176 lbs
Small Double Ended Adaptor, 32 mm
TITANIUM
Part weight = 80 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-402 Each
Small Double Ended Adaptor, 28 mm
TITANIUM
Part weight = 86 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-401 Each
Small 4 Hole Connector w/ Pyramid Receiver
TITANIUM
Part weight = 63 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-193 Each
Small 4 Hole Connector w/ Pyramid
TITANIUM
Part weight = 59 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-192 Each
22 mm Tube Clamp w/30 mm Pyramid Receiver
TITANIUM
Part weight = 65 g
Weight rating = 150 lbs (68 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 4 mm
SKU UOM
P-523 Each
Tube Clamp, 22 mm
TITANIUM
With Knurling Patent Pending
Part weight = 49 g
Weight rating = 150 lbs (68 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 4 mm
SKU UOM
P-203A Each
Tube Clamp, 22 mm
ALUMINUM
With Knurling Patent Pending
Part weight = 49 g
Weight rating = 99 lbs (45 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 4 mm
SKU UOM
P-203B Each
� What do you do when you have a pediatric client who is getting to big to use 22 mm components and to small to weight them down with 30 mm components?
� Use TiMed's 25 mm System as it fills the gap between 22 and 30 mm. 25 mm weight ratings are 176lbs!
� What do you do when your client is elderly and weighs about a 100 pounds?
� Ever wish you had a little more foam to remove for a cosmetic foam cover?
� TiMed's 25 mm System provides you with that little extra in circumference and weight reduction.
6
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 176 lbs22 mm Tube w/ Pyramid Receiver
TITANIUM
TiMed can custom cut this item to length for you!
100 mm
Part weight = 72 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-422 Each
Small 4 Hole Rotating Base
TITANIUM
Part weight = 39 g
Weight rating = 176 lbs (80 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 4 mm
SKU UOM
P-502 Each
Tube Clamp, 25 mm
TITANIUM
With Knurling Patent
Part weight = 48 g
Weight rating = 176 lbs (80 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 4 mm
SKU UOM
P-503 Each
Small Double Ended Adaptor,45 mm
TITANIUM
Part weight = 84 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-403 Each
Small Double Ended Adaptor, 60 mm
TITANIUM
Part weight = 86 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-404 Each
25 mm Tube w/ Pyramid Receiver
TITANIUM
TiMed can custom cut this item to length for you!
100 mm
Part weight = 72 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-405 Each
7
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 176 lbsSmall Rotating Pyramid
TITANIUM
Part weight = 26 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-505 Each
Small Rotating Pyramid Receiver
TITANIUM
Part weight = 38 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-506 Each
Small SACH Foot Adapter with M8 Bolt
TITANIUM
Part weight = 50 g
Weight rating = 176 lbs (80 kg)
Torque specs = 30 Nm
Foot Bolt x 1 = 8 mm
SKU UOM
P-509 Each
Small 4 Ear Connector
TITANIUM
Part weight = 34 g
Weight rating = 176 lbs (80 kg)
SKU UOM
P-510 Each
Small Flexible 3 Ear Connector
TITANIUM
Part weight = 45 g
Weight rating = 176 lbs (80 kg)
Torque specs = 15 Nm
Clamp Screw = 4 mm
SKU UOM
P-511-3 Each
25 mm Tube Clamp w/30 mm Pyramid Receiver
TITANIUM
Part weight = 72 g
Weight rating = 176 lbs (80 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 4 mm
SKU UOM
P-513 Each
8
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 220 lbs4 Hole Connector with Pyramid
ALUMINUM
Part weight = 63 g
Weight rating = 220 lbs (100 kg)
SKU UOM
AL-192 Each
Threaded 4 Hole Laminating Ring
ALUMINUM
Part weight =
Weight rating = 220 lbs (100 kg)
SKU UOM
AL-620 Each
4 Ear Connector with Hole
ALUMINUM
Part weight = 64 g
Weight rating = 220 lbs (100 kg)
SKU UOM
AL-510 Each
Rotating Pyramid Receiver Adapter
ALUMINUM
Part weight = 38 g
Weight rating = 220 lbs (100 kg)
SKU UOM
AL-506 Each
Rotating 4 Ear Base w/Rotating Pyramid Receiver
ALUMINUM
Part weight =
Weight rating = 220 lbs (100 kg)
Torque specs = 13 Nm
Clamp Screw x 1 = 5 mm
Component Parts AL-506 & AL702
SKU UOM
AL-726 Each
SACH Foot Adapter with M10 Bolt
ALUMINUM
Part weight = 108 g
Weight rating = 220 lbs (100 kg)
Torque specs = 30 Nm
Foot Bolt x 1 = 8 mm
SKU UOM
AL-509 Each
4 Ear Rotating Connector Base
ALUMINUM
Part weight =
Weight rating = 220 lbs (100 kg)
Torque specs = 13 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
AL-702 Each
Tube Clamp, 30 mm
ALUMINUM
Part weight = 89 g
Weight rating = 220 lbs (100 kg)
Torque specs = 13 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
AL-503 Each
9
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 275 lbsDouble Ended Adapter 60 mm
STAINLESS STEEL
Height = 60 mm
Part weight = 171 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-403 Each
Double Ended Adapter 75 mm
STAINLESS STEEL
Height = 75 mm
Part weight = 198 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-404 Each
4 Hole Connector with Pyramid
STAINLESS STEEL
Part weight = 106 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-192 Each
4 Hole Connector Pyramid Receiver
STAINLESS STEEL
Part weight = 108 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-193 Each
Double Ended Adapter 32 mm
STAINLESS STEEL
Height = 32 mm
Part weight = 117 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-401 Each
Double Ended Adapter 45 mm
STAINLESS STEEL
Height = 45 mm
Part weight = 144 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-402 Each
Tube Clamp, 30 mm
STAINLESS STEEL
Part weight = 130 g
Weight rating = 275 lbs (125 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
SS-503 Each
Rotating Pyramid Receiver
STAINLESS STEEL
Part weight = 69 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-506 Each
1 0
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
SACH Foot Adapter with M10 Bolt
STAINLESS STEEL
Part weight = 113 g
Weight rating = 275 lbs (125 kg)
Torque specs = 30 Nm
Foot Bolt x 1 = 8 mm
SKU UOM
SS-509 Each
4 Prong Rotating Adapter
STAINLESS STEEL
Pyramid Receiver / CONT. Tie Off
Part weight = 145 g
Weight rating = 275 lbs (125 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
SS-521 Each
4 Ear Connector with Hole
STAINLESS STEEL
Lamination Dummy Included
Part weight = 97 g
Weight rating = 275 lbs (125 kg)
SKU UOM
SS-510 Each
3 Prong Rotating Adapter with Pyramid Receiver
STAINLESS STEEL
Part weight = 160 g
Weight rating = 275 lbs (125 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 5 mm
Component Parts SS-511 & SS-506
SKU UOM
SS-516-3 Each
5 mm Offset Tube Clamp, 30 mm
STAINLESS STEEL
Part weight = 139 g
Weight rating = 275 lbs (125 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
SS-805 Each
LE Prosthetics – Rated to 275 lbs
1 1
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 300 lbs4 Hole Connector with Pyramid and Through Hole
TITANIUM
Part weight = 59 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-192 Each
25 mm – 30 mm Threaded Coupler
TITANIUM
Part weight = 49 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-25-30 Each
30 mm – 25 mm Threaded Reducer
TITANIUM
Part weight = 32 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-30-25 Each
60 mm Double Ended Adapter
TITANIUM
Height = 60 mm
Part weight = 104 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-403 Each
32 mm Double Ended Adapter
TITANIUM
Height = 32 mm
Part weight = 86 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-401 Each
45 mm Double Ended Adapter
TITANIUM
Height = 45 mm
Part weight = 99 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-402 Each
4 Hole Connector with 8 mm Diagonal Offset Pyramid – no through hole
TITANIUM
Part weight = 71 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-292 Each
Double Ended Pyramid Adaptor with Through Hole
TITANIUM
Part weight = 78 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-210 Each
1 2
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
75 mm Double Ended Adapter
TITANIUM
Height = 75 mm
Part weight = 123 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-404 Each
4 Hole Connector with 6.5 mm Axial Offset Pyramid – no through hole
TITANIUM
Part weight = 70 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-492 Each
4 Hole Rotating Base
TITANIUM
Part weight = 39 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-502 Each
Rotating Pyramid w/Threaded Body
TITANIUM
TiMed can custom cut this item to length for you!
Height = 100 mm
Part weight = 137 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-425 Each
Rotating Pyramid Receiver w/ Threaded Body
TITANIUM
TiMed can custom cut this item to length for you!
Height = 100 mm
Part weight = 138 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
SKU UOM
A-415 Each
30 mm Tube with Pyramid Receiver
TITANIUM
TiMed can custom cut this item to length for you!
Height = 100 mm
Part weight = 123 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-405 Each
LE Prosthetics – Rated to 300 lbs
1 3
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
30 mm Tube Clamp Adaptor with Knurled Inner Surface and T-Slot
TITANIUM
Height = 40 mm
Part weight = 83 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-503T Each
Rotating Pyramid Receiver
TITANIUM
Part weight = 50 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-506 Each
Low Profile 30 mm Tube Clamp Adaptor with Pyramid
TITANIUM
Knurled Inner Surface with T-Slot
Part weight = 71 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-504 Each
Rotating Pyramid – With Through Hole
TITANIUM
Part weight = 39 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-507 Each
Rotating Pyramid – No Through Hole
TITANIUM
Part weight = 52 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-505 Each
Lamination 4 Prong Connector with through hole
TITANIUM
Lamination Dummy Included
Part weight = 50 g
Weight rating = 300 lbs (136 kg)
SKU UOM
A-510 Each
LE Prosthetics – Rated to 300 lbs
1 4
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Prong Connector with Titanium Pyramid
STAINLESS STEEL
Part weight = 160 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-505 & SS-511
SKU UOM
A-515-3 Each
4 Prong Connector with Titanium Pyramid
STAINLESS STEEL
Continues Tie-off Groove
Part weight = 160 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-505 & SS-521
SKU UOM
A-515-4 Each
LE Prosthetics – Rated to 300 lbsFlexible 3 Prong Connector
TITANIUM
Part weight = 61 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-511-3 Each
Flexible 3 Prong Connector
TITANIUM
Part weight = 55 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-511-4 Each
1 5
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
3 Prong Connector with Titanium Rotating Pyramid Receiver
STAINLESS STEEL
Part weight = 160 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-506 & SS-511
SKU UOM
A-516-3 Each
Flexible 4 Ear Connector with Rotating Pyramid
TITANIUM
Continues Tie-off Groove
Part weight = 109 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-505 & A-511-3
SKU UOM
A-535 Each
Flexible 4 Prong Connector with Rotating Pyramid Receiver
TITANIUM
Part weight = 109 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-506 & A-511-4
SKU UOM
A-536 Each
4 Hole Rotating Base with Pyramid
TITANIUM
Part weight = 98 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-505 & A-502
SKU UOM
A-525 Each
4 Hole Rotating Base with Pyramid Receiver
TITANIUM
Part weight = 94 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
Component Parts A-506 & A-502
SKU UOM
A-526 Each
LE Prosthetics – Rated to 300 lbs
1 6
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Internal Threaded Adaptor with Pyramid Adaptor
TITANIUM
Part weight = 52 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-605 Each
5 mm Offset 30 mm Tube Clamp Adaptor with Knurled inner Surface and T-Slot
TITANIUM
Height = 40 mm
Part weight = 89 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-805T Each
Internal Threaded Adaptor with Pyramid Receiver
TITANIUM
Part weight = 52 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-606 Each
3 Prong Rotating Adapter
STAINLESS STEEL
Part weight = 109 g
Weight rating = 300 lbs (136 kg)
Torque specs = 15 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
SS-511 Each
SACH Foot Adaptor without Flange – M10 Bolt
TITANIUM
Part weight = 85 g
Weight rating = 300 lbs (136 kg)
Torque specs = 30 Nm (11 ft-lb)
Foot Bolt x 1 = 8 mm
SKU UOM
A-609 Each
LE Prosthetics – Rated to 300 lbs
1 7
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Heavy Duty SACH Foot Adaptor with Flange – M10 Bolt
TITANIUM
Part weight = 90 g
Weight rating = 350 lbs (159 kg)
Torque specs = 30 Nm
Foot Bolt x 1 = 8 mm
SKU UOM
A-509-HD Each
Lamination 4 Prong Connector with no through hole
TITANIUM
Lamination Dummy Included
Part weight = 55 g
Weight rating = 350 lbs (159 kg)
SKU UOM
A-610-HD Each
Heavy Duty 30 mm Tube Clamp Adaptor
TITANIUM
Height = 50 mm
Part weight = 95 g
Weight rating = 350 lbs (159 kg)
Torque specs = 15 Nm (11 ft-lb)
Clamp Screw x 1 = 5 mm
SKU UOM
A-613-HD Each
4 Hole Connector with Pyramid – no through hole
TITANIUM
Part weight = 56 g
Weight rating = 350 lbs (159 kg)
SKU UOM
A-692-HD Each
34 mm Heavy Duty Tube Clamp
TITANIUM
For use with standard foot pyramid
Part weight = 181 g
Weight rating = 440 lbs (199 kg)
Torque specs = 25 Nm
Clamp Screw x 1 = 5mm
SKU UOM
EH-513 Each
LE Prosthetics – Rated to 350 lbs
LE Prosthetics – Rated to 440 lbs
1 8
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Rated to 500 lbs34 mm Tube Clamp
TITANIUM
Enlarged Receiver made to use with Extra Heavy Duty Components and EH-440, HD-500
When using other types of feet use EH-513
Part weight = 181 g
Weight rating = 500 lbs (227 kg)
Torque specs = 25 Nm
Clamp Screw x 1 = 5 mm
SKU UOM
EH-503-XHD Each
4 Prong Lamination Clamp
TITANIUM
Part weight = 190 g
Weight rating = 500 lbs (227 kg)
Torque specs = 25 Nm
Clamp Screw x 1 = 5mm
SKU UOM
EH-653 Each
4 Prong Connector
TITANIUM
Part weight = 156 g
Weight rating = 500 lbs (227 kg)
SKU UOM
EH-610-XHD Each
Above the Knee Adapter
TITANIUM
Fits EH-605, EH-701 Shuttle Lock and KN-500 Polycentric Knee
Part weight = 63 g
Weight rating = 500 lbs (227 kg)
SKU UOM
EH-693 Each
Above the Knee Adapter
TITANIUM
Fits into EH-653 and EH-693
Part weight = 63 g
Weight rating = 500 lbs (227 kg)
SKU UOM
EH-605 Each
Above the Knee Extra Heavy Duty Shuttle Lock
TITANIUM
Part weight = 254 g
Weight rating = 500 lbs (227 kg)
SKU UOM
EH-701 Each
1 9
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
325 Shuttle Clutch Lock Kits � Removable clutch body
� Ratchet operation provides audible clicking sound, assuring the patient is secure
� 3D forged titanium construction
� Modular design
� Removable clutch body
� Weight limit: 136 kg (300 lbs)
� Materials: Titanium and stainless steel
SKU Includes UOM
TA-325T A-701 Titanium Pyramid Shuttle Clutch Lock Body 325
A-511 Titanium Flexible 3 Ear Connector (55 g)
A-703 Clutch Lock Pin, (21 g)
T-200 Lamination Dummy
Each
TA-325 A-701 Titanium Pyramid Shuttle Clutch Lock Body 325
A-511 Titanium Flexible 3 Ear Connector (55 g)
A-703 Clutch Lock Pin, (21 g)
Each
SS-325T A-701 Titanium Pyramid Shuttle Clutch Lock Body 325
SS-511 Stainless Steel 3 Ear Connector (109 g)
A-703 Clutch Lock Pin, (21 g)
T-200 Lamination Dummy
Each
SS-325 A-701 Titanium Pyramid Shuttle Clutch Lock Body 325
SS-511 Stainless Steel 3 Ear Connector (109 g)
A-703 Clutch Lock Pin, (21 g)
Each
LE Prosthetics – Shuttle Locks
Aluminum Shuttle Lock (Pyramid) Kit with Aluminum 4 Ear & DummySKU Includes UOM
AL-325T AL-701 Aluminum Shuttle Clutch Lock Body (117 g)
AL-702 Aluminum 4 Ear Rotating Connector Base
A-703 Clutch Lock Pin
T-200 Lamination Dummy Set
Each
TA-325
SS-325
2 0
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
425 Shuttle Clutch Lock Kits � Ratchet operation provides audible clicking sound, assuring the patient is secure
� Removable clutch body insert allows easy change of lock with componentry
� Modular design
� 3D forged titanium construction
� Weight limit: 136 kg (300 lbs)
� Materials: Titanium and stainless steel
SKU Includes UOM
TA-425T A-705 Titanium Pyramid Receiver Shuttle Clutch Lock Body 425
A-511 Titanium Flexible 3 Ear Connector (55 g)
A-706 Clutch Lock Pin, Short (13 g)
T-200 Lamination Dummy
Each
TA-425 A-705 Titanium Pyramid Receiver Shuttle Clutch Lock Body 425
A-511 Titanium Flexible 3 Ear Connector (55 g)
A-706 Clutch Lock Pin, Short (13 g)
Each
SS-425T A-705 Titanium Pyramid Receiver Shuttle Clutch Lock Body 425
SS-511 Stainless Steel 3 Ear Connector (109 g)
A-706 Clutch Lock Pin, Short (13 g)
T-200 Lamination Dummy
Each
SS-425 A-705 Titanium Pyramid Receiver Shuttle Clutch Lock Body 425
SS-511 Stainless Steel 3 Ear Connector (109 g)
A-706 Clutch Lock Pin, Short (13 g)
Each
LE Prosthetics – Shuttle Locks
Aluminum Shuttle Clutch Lock Body � With Pyramid
SKU Description UOM
A-701 Aluminum Shuttle Clutch Lock Body Each
SS-425
TA-425
2 1
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Trans Tibial Kit 300 lbs / 136kg
A-192 Titanium 4 Hole Connector with Pyramid (50 g)
A-503T Titanium Low Profile Tube Clamp, 30 mm (83 g)
A-612 Aluminum Pylon with Titanium Receiver, 400 mm (306 g)
SKU Description UOM
BK-300 Kit Each
Trans Tibial Kit 300 lbs / 136 kg
A-503 Titanium Low Profile Tube Clamp, 30 mm (83 g)
A-612 Aluminum Pylon with Titanium Receiver, 400 mm (306 g)
SKU Description UOM
BK-301 Kit Each
Trans Tibial Kit 300 lbs / 136 kg
A-510 Titanium 4 Ear Connector with Hole (50 g)
A-503 Titanium Low Profile Tube Clamp, 30 mm (83 g)
A-612 Aluminum Pylon with Titanium Receiver, 400 mm (306 g)
SKU Description UOM
BK-303 Kit Each
LE Prosthetics – Trans Tibial KitsTrans Tibial Kit 220 lbs / 100kg
AL-503 Aluminum Tube Clamp, 30 mm (89 g)
AL-512 Aluminum Pylon with Aluminum Receiver, 400 mm, (324 g)
SKU Description UOM
BK-100 Kit Each
Trans Tibial Kit 250 lbs / 113 kg
A-192 Titanium 4 Hole Connector w/ Pyramid (50 g)
A-503T Titanium Low Profile Tube Clamp, 30 mm (83 g)
A-512 Aluminum Pylon with Titanium Receiver, 400 mm, (295 g)
A-509 HD Titanium SACH Foot Adapter with bolt (90 g)
SKU Description UOM
BK-200 Kit Each
Trans Tibial Kit 250 lbs / 113 kg
A-503T Titanium Low Profile Tube Clamp, 30 mm (83 g)
A-512 Aluminum Pylon with Titanium Receiver, 400 mm, (295 g)
SKU Description UOM
BK-201 Kit Each
2 2
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Trans Tibial KitsTrans Tibial Kit 350 lbs / 159 kgA-692 HD Titanium 4 Hole Connector without Pyramid Hole (56 g)
A-613 HD Titanium Heavy Duty Tube Clamp, 30 mm (95 g)
A-200 HD 30 mm Carbon Tube, 300 mm (148 g)
A-509 HD Titanium SACH Foot Adapter with bolt (95 g)
SKU Description UOM
BK-350 Kit Each
Trans Tibial Kit 500 lbs / 227 kgEH-610 XHD 4 Ear Connector, (156 g)
A-500 XHD 34 mm Carbon Tube, (236 g)
EH-503 XHD 34 mm Tube Clamp, (181 g)
SKU Description UOM
BK-500 Kit Each
Trans Tibial Kit 440 lbs / 199 kgH-610 XHD 4 Ear Connector, (156 g)
A-500 XHD 34 mm Carbon Tube, (236 g)
EH-513 Tube Clamp,(181 g)
SKU Description UOM
BK-440 System Kit Each
2 3
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Trans Fermural KitsAbove the Knee Heavy Weight System KitPart weight = 754 g
Weight rating = 440 lbs (199 kg)
SKU Description UOM
AK-440 System Kit Each
Above the Knee Heavy Weight SystemPart weight = 754 g
Weight rating = 500 lbs (227 kg)
SKU Description UOM
AK-500 System Kit Each
2 4
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
The Rhythm Foot � Designed to mimic anatomical foot action, the Rhythm Foot is adjustable for your patients requirements. A properly fitted Rhythm Foot provides improved mobility accompanied by lower energy expenditure. The Rhythm Foot provides a high level K rating in amputees weighing up to 100 kg (220 lbs). Most amputees can be managed at various K levels by utilizing the Rhythm Foot.
� This foot is unilateral, size adjustable and can be used with existing cosmetic foot shells. The foot is moulded by Centennial Plastic Mfg. Inc. using DuPont™ Hytrel® which is a an engineered polymer that produces superior function, energy return and durability. Hytrel's® characteristics provide smooth actions, reducing biomechanical forces on the residual limb.
� The Rhythm Foot is intended for use as a permanent option for lower extremity prosthetic management. Relying on its proven effectiveness The Rhythm Foot can also be considered as an interim, shower, swimming, stubby, post operative or effective dynamic cost option.
� Complete information and specifications can be found at www.rhythmfoot.ca
SKU Description UOM
RF2 Rhythm Foot / Unilateral / K 1-3 / Hytrel / Modifiable / 24 – 28 cm Each
A-609M Titanium Rhythm Foot Adapter / Anti Rotation Keys w/o Flange Each
A-609BNC Non-Corrosive Alloy Steel M10 Bolt – 45 mm Length / Washer Each
RFASW Anti-sounding Washer Each
RFCL24 24 cm Rhythm Foot Shell – Left Each
RFCL25 25 cm Rhythm Foot Shell – Left Each
RFCL26 26 cm Rhythm Foot Shell – Left Each
RFCL27 27 cm Rhythm Foot Shell – Left Each
RFCL28 28 cm Rhythm Foot Shell – Left Each
RFCL29 29 cm Rhythm Foot Shell – Left Each
RFCR24 24 cm Rhythm Foot Shell – Right Each
RFCR25 25 cm Rhythm Foot Shell – Right Each
RFCR26 26 cm Rhythm Foot Shell – Right Each
RFCR27 27 cm Rhythm Foot Shell – Right Each
RFCR28 28 cm Rhythm Foot Shell – Right Each
RFCR29 29 cm Rhythm Foot Shell – Right Each
LE Prosthetics – Feet
2 5
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LITTLE FEET Wood Core and Symes models � Bolt-on “SACH” type design with unique energy dynamics
� Wood Core Model: Only 13 cm model has fiberglass keel
� Symes Model: All sizes with fiberglass keel
� Proprietary elastomer foot body, Flexible toes
� Anatomically very realistic
� Special, removable heel plug improves "barefoot" appearance
� 3 colors: Tan, medium brown and dark complexion
� Ideal for crawling, toddling, walking, etc.
APPLICATION:
� Age: Infants – Six months to twenty-four months
� Limb Length: Trans-tibial and trans-femoral applications
� Mounting hole: 5/16 inch ( 8 mm) diameter
� Mounting Hardware: 5/16 – 18 TPI x 2 in bolt w/ steel washer and “T” nut (All models)
� 2-3/4 in bolt also included w/ 12 cm model
SPECIFICATIONS
Models 10 cm 11 cm 12 cm 13 cm
Length: 3.9 in (10 cm) 4.3 in (11 cm) 4.7 in (12 cm) 5.1 in (13 cm)
Width: 1.9 in (4.7 cm) 2.1 in (5.2 cm) 2.2 in (5.6 cm) 2.3 in (5.9 cm)
Height: 1.7 in (4.2 cm) 1.7 in (4.2 cm) 2 in (5 cm) 2.1 in (5.2 cm)
Weight: 3.4 oz (96 g) 4.1 oz (117 g) 5.9 oz (167 g) 7 oz (199 g)
Diameter Major: 1.7 in (4.4 cm) 1.9 in (4.9 cm) 2.1 in (5.3 cm) 2.2 in (5.6 cm)
Diameter Minor: 1.6 in (4 cm) 1.7 in (4.3 cm) 1.9 in (4.8 cm) 1.9 in (4.8 cm)
Diameter Wood Core: 1.25 in (3.2 cm) 1.5 in (3.8 cm) 1.5 in (3.8 cm) 1.5 in (3.8 cm)
LE Prosthetics – Feet
SACH MODEL
SKU Description UOM
10FTL0 10 cm Left Each
10FTR0 10 cm Right Each
11FTL0 11 cm Left Each
11FTR0 11 cm Right Each
12FTL0 12 cm Left Each
12FTR0 12 cm Right Each
13FTL0 13 cm Left Each
13FTR0 13 cm Right Each
SYMES MODEL
SKU Description UOM
10FTSYMESLO 10 cm Left - SYMES Each
10FTSYMESRO 10 cm Right - SYMES Each
11FTSYMESL0 11 cm Left - SYMES Each
11FTSYMESR0 11 cm Right - SYMES Each
12FTSYMESL0 12 cm Left - SYMES Each
12FTSYMESR0 12 cm Right - SYMES Each
2 6
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Eldorado Z-Axis Climbing Foot � Revolutionary, compact design (no right or left)
� Designed with the invaluable input of Malcolm Daly (pictured left), Paradox Sports® and Evolve-Sports®
� Superior control, loading, leverage and proprioception
� High strength keel for stability and control
� Compliant polymer foot matrix provides “feel” under load
� Complete with rugged, custom Evolve Sports® TRAX-XT5 sticky, climbing shoe rubber
� Includes certificate for EVOLVE®, matching, climbing shoe (uni-laterals only)
� Eldorado Z-Axis comes complete with titanium pyramid adapter and appropriate hardware pre-installed to manufacturer’s specifications
� Simply attach to any lower extremity, endoskeletal prosthesis designed to receive a standard pyramid adapter
CONSTRUCTION/MATERIALS: � Foot: High performance, light-weight core and reinforced keel system encased in matrix of high strength polymers. Titanium pyramid adapter installed with hardware to mfg. specifications. Foot pre-installed in shoe.
� Shoe: Tough, high strength, abrasion resistant materials. High traction “sticky rubber” sole, toe and heel, typical of high performance rock climbing footwear.
� Application: Unilateral and bilateral trans-tibial and certain transfemoral climbers. Suggested climber weight: 300 lbs /136 kg (max.)
SKU Description UOM
ELDORADOZ Climbing Foot Each
ELDORADOZQ Climbing Foot With Certificate Each
SPECIFICATIONS: � Length: 7.25 in (18.4 cm) � Width: 2.8 in (7.1 cm) � Height:* 3.75 in (9.5 cm) � Height:** 4.5 in (11.4 cm) � Weight: 25 oz (709 g) � Foot Color: TRS tan � Shoe Color: Combination of blue/black/grey/white. � Shoe Style: Evolve® TRAX-XT5 (Laced),High traction toe, sole and heel.
* w/o Pyramid Adapter
** w/ Pyramid Adapter
LE Prosthetics – FeetHeavy Duty Flex Foot
� Foot is compatible with TiMed Extra Heavy Duty BK-440 System Kit.
� 440 lbs / 199 kg
SKU Description UOM
EH-4400 Heavy Duty Flex Foot Each
2 7
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – PylonsAluminum Tube 30 mm
Part weight = 236 g
Weight rating = 300 lbs (136 kg)
SKU Description UOM
A-100 Aluminum Tube 30 mm Each
Aluminum Tube 22 mmPart weight = 105 g
Weight rating = 99 lbs (45 kg)
SKU Description UOM
A-400B Aluminum Tube 22 mm Each
Carbon Fiber Tube 22 mmWeight rating = 150 lbs (80 kg)
SKU Description UOM
A-422C Carbon Fiber Tube 22 mm Each
Aluminum Tube 30 mm 36 InchPart weight = 526 g
Weight rating = 250 lbs (113 kg)
SKU Description UOM
A-300 Aluminum Tube 30 mm 36 Inch Each
Aluminum Tube 25 mmPart weight = 245 g
Weight rating = 176 lbs (80 kg)
SKU Description UOM
A-400A Aluminum Tube 25 mm Each
Carbon Fiber Tube 34 mmPart weight = 236 g
Weight rating = 500 lbs (227 kg)
SKU Description UOM
A-500-XHD Carbon Fiber Tube 34 mm Each
2 8
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Aluminum Pylon w/ Stainless Steel Receiver400 mm
Part weight = 325 g
Weight rating = 275 lbs (125 kg)
SKU Description UOM
SS-512 Aluminum Pylon w/ Stainless Steel Receiver
Each
Aluminum Pylon with Titanium Receiver400 mm
Part weight = 295 g
Weight rating = 275 lbs (125 kg)
SKU Description UOM
A-512 Aluminum Pylon with Titanium Receiver
Each
Aluminum Pylon with Titanium Receiver400 mm
Part weight = 306 g
Weight rating = 300 lbs (136 kg)
SKU Description UOM
A-612 Aluminum Pylon with Titanium Receiver
Each
Aluminum Pylon with Integrated Receiver 400 mm
Part weight = 324 g
Weight rating = 220 lbs (100 kg)
SKU Description UOM
AL-512 Aluminum Pylon with Integrated Receiver
Each
Aluminum Pylon with Titanium Receiver400 mm
Part weight = 289 g
Weight rating = 250 lbs (113 kg)
SKU Description UOM
A-712 Aluminum Pylon with Titanium Receiver
Each
LE Prosthetics – Pylons
2 9
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – KneesAluminum Pediatric 4 Bar Knee with Pyramid
Part weight = 176 g
Weight rating = 120 lbs (55kg)
SKU Description UOM
PK-400 Aluminum Pediatric 4 Bar Knee with Pyramid
Each
Polycentric Knee With Lock
Part weight = 548 g
Weight rating = 500 lbs / 275 kg
SKU Description UOM
KN-500 Polycentric Knee With Lock Each
3 0
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Alignment PlatesGrace Plate
� 6.6 cm diameter x 6 mm thick
� Thermoplastic or laminated socket adaptor, with a 4-hole European pattern design that fits most all prosthetic components.
� Fabricated with state-of-the-art aircraft aluminum, The "Grace Plate 1210", has been used in thousands of prostheses.
� For your convenience, The "Grace Plate #1210" comes with a set of long and short screws. Long Screws = OAL 1" Short Screws = OAL 3/4"
SKU Description UOM
GRACE1210 Grace Plate Each
Grace Plate
� Spacer Plate - 6.9 cm diameter x 3 mm thick
� The "Grace Spacer Plate" is a round, light weight aluminum 4-hole spacer plate designed for use between the socket and 4-hole pyramid adaptor.
� The unique design makes the "Grace Spacer Plate #1934" an ideal component when used in conjunction with the "Grace Plate #1210".
SKU Description UOM
GRACE1934 Grace Plate Each
4 Hole Temp Block
WHY ARE YOU STILL REUSING YOUR OLD WOOD BLOCKS?
� 4 Hole Temporary Set up Block - Laminated Ply / T NUTS
� To reuse an expensive wood block (the intention was to maximize savings) our technicians could spend up to 20 minutes freeing a block up, then cleaning and prepping it for reuse.
� The time and labor involved, cost us on average two times more than just using a new block, plus reusing the block exposed our technicians to the dangers of a band saw, toxic dust and fumes from cutting through glues.
� Reusing possibly damaged blocks on patients exposes companies to costly liability issues.
� We chose to design a very cost effective wood block that can be disposed of after it has been used once. Thus, saving us time, money and future risks.
� Weight Limit: 300 lbs. /136 kg
SKU Description UOM
MTBLOCK 4 Hole Temp Block Each
3 1
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Alignment PlatesIPOS 12 mm Posterior Offset Plate
� (A27-AI3) Oval
SKU Description UOM
IPOS12POP IPOS 12 mm Posterior Offset Plate Each
IPOS 8 mm Posterior Offset Plate
� (A27-AI2) Round
SKU Description UOM
IPOS8POP IPOS 8 mm Posterior Offset Plate Each
IPOS 4 Hole BK Low Height Attachment Plate
� (A26-A1)
SKU Description UOM
IPOS4HBKP IPOS 4 Hole BK Low Height Attachment Plate
Each
3 2
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Alignment Plates4 Hole 13 mm (1/2") Alignment Plate
� Offset Plate
� 1/4" Aluminum
SKU Description UOM
AL413OS 4 Hole 13 mm (1/2") Alignment Plate Each
4 Hole 19 mm (3/4") Alignment Plate
� Offset Plate
� 1/4" Aluminum
SKU Description UOM
AL419OS 4 Hole 19 mm (3/4") Each
4 Hole 25 mm (1") Alignment Plate
� Offset Plate
� 1/4" Aluminum
SKU Description UOM
AL425OS 4 Hole 25 mm (1") Alignment Plate Each
4 Hole 9 mm (3/8") Alignment Plate
� Offset Plate
� 1/4" Aluminum
SKU Description UOM
AL409OS 4 Hole 9 mm (3/8") Alignment Plate Each
3 3
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Prosthetics – Miscellaneous
4 Hole Lamination Block
� Urethane
SKU Description UOM
F-100 4 Hole Lamination Block Each
Aluminum 360° Sliding/Rotatable Pyramid Adapter
� 170 g
� Rated to: 220 lbs (100kg)
� Lamination Dummy Included
� T-400 Required for Laminating
SKU Description UOM
ST-100 Pyramid Adapter Each
Titanium Foot Bolt
� 10 mm
SKU Description UOM
T-100 Titanium Foot Bolt Each
Non Corrosive Set Screws
� 4 grub screws
� 1 clamp screw
SKU Description UOM
NONCORSCREWS Non Corrosive Set Screws Each
Lamination Dummy
� For Shuttle Lock System Set
SKU Description UOM
T-200 Lamination Dummy Each
Lamination Dummy
� For 3 Prong Rotating Adapter (SS-511 & A-511)
SKU Description UOM
T-300 Lamination Dummy Each
Lamination Dummy
� For ST-100 Set
SKU Description UOM
T-400 Lamination Dummy Each
3 4
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Orthotics – SS Ankle JointsStainless Steel Gaffney Hinge
� Width 7/16" (~1.1 cm) Length 1-1/2" (~3.8 cm)
� Designed for the newborn.
� This hinge allows you to put the minimum necessary on your patient while still performing the function needed.
SKU Description UOM
505-COLT Stainless Steel Gaffney Hinge Each
Stainless Steel Gaffney Hinge
� Width 7/16" (~1.1 cm) Length 2" (~5.1 cm)
� Designed for the small child
� Made to avoid the distal portion of hinge from interference with the control area and to help in shoe space problems.
SKU Description UOM
510-PONY Stainless Steel Gaffney Hinge Each
STALLION Stainless Steel Gaffney Hinge
SKU Description UOM
660-STALLION Width 7/16" (~1.1 cm) Length 2-1/2" (~6.4 cm)For children up to small adults.
Each
660-T-STALLION Thinner than the 660 STALLION, 12 ga SS instead of 10 ga
Each
Stainless Steel Gaffney Hinge
� Width 9/16" (~1.4 cm) Length 3" (~7.6 cm)
� Adjustable stop for use on children 80 lbs (36 kg) or less.
� Ideal for post-operative heel cord lengthening.
� To adjust, remove triangular block, file to desired degree, then replace.
SKU Description UOM
747-SHETLAND Stainless Steel Gaffney Hinge Each
Hinge Repair KitsSKU Fits UOM
PK-500 Use with 505, 510 & 660-T Each
PK-600 Use with 660 & 747 Each
PK-700 Use with 705, 707 & 710 Each
PK-800 Use with 810 Each
PK-700PK-500
3 5
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Orthotics – SS Ankle JointsStainless Steel Gaffney Hinge
� Width 9/16" (~1.4 cm) Length 2" (~5.1 cm)
� Designed for adolescents and adults
� A short hinge but has extra width for more wear surface. Has large pin and clip.
SKU Description UOM
705-MUSTANG Stainless Steel Gaffney Hinge Each
Stainless Steel Gaffney Hinge
� Width 9/16" (~1.4 cm) Length 2-1/2" (~6.4 cm)
� Designed for teens and adults.
� For use when small distal portion is desired to avoid bone prominence or interference in control area
SKU Description UOM
707-FILLY Stainless Steel Gaffney Hinge Each
Stainless Steel Gaffney Hinge
� Width 9/16" (~1.4 cm) Length 3" (~7.6 cm)
� Designed for use with teens and average size adults. Has extra width and large pin
SKU Description UOM
710-BRONCO Stainless Steel Gaffney Hinge Each
Stainless Steel Gaffney Hinge
� Width 11/16" (~1.7 cm) Length 3-1/2" (~8.9 cm)
� This is our largest hinge, designed with your toughest patients in mind.
SKU Description UOM
810-CLYDESDALE Stainless Steel Gaffney Hinge
Each
Gaffney Alignment Kits � Each set includes four adjustable tools and starter rod, with a solid polyurethane tool holder. Designed to save you time and assure proper alignment.
SKU Fits UOM
A-600 Use with 505, 510, 660-T, 660 & 747 Each
A-700 Use with 705, 707 & 710 Each
A-800 Use with 810 Each
3 6
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Orthotics – Flexures (Child)D.F.A. Kit
� 80-D - White
SKU Description UOM
2000 D.F.A. Kit Each
D.F.A. Kit
� 85-D - Clear
SKU Description UOM
2000-C D.F.A. Kit Each
D.F.A. Kit
� 80-D - White
SKU Description UOM
2010 D.F.A. Replacement Flexures Each
D.F.A. Kit
� 85-D - Clear
SKU Description UOM
2010-C D.F.A. Replacement Flexures Each
3 7
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
LE Orthotics – Flexures (Adult)
D.F.A. Kit
� 85-D - Clear
SKU Description UOM
2001-C D.F.A. Kit Each
D.F.A. Replacement Flexures
� 85-D - Clear
SKU Description UOM
2012-C D.F.A. Replacements Flexure Each
D.F.A. Kit
� 80-D - Black
SKU Description UOM
2001-B D.F.A. Kit Each
D.F.A. Replacement Flexures
� 80-D - Black
SKU Description UOM
2012-B D.F.A. Replacement Flexures Each
D.F.A. Kit
� 80-D - White
SKU Description UOM
2001 D.F.A. Kit Each
D.F.A. Replacement Flexures
� 80-D - White
SKU Description UOM
2012 D.F.A. Replacements Flexure Each
3 8
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Gaffney Bumpers
� Gaffney Jackscrew adjustable Stainless Steel Bumper
� The Jack Screw Adjustable Stop is designed to be easy to install and inexpensive with the maximum amount of adjustment.
SKU Description UOM
AB-1000 Gaffney Bumpers Each
Gaffney Bumpers
� Polyurethane Cord 5 ft Length
SKU Description UOM
B-350 3/16" Each
B-400 1/4" Each
Gaffney Bumpers
� Rubber Screw In Type
SKU Description UOM
B-300 D.F.A. Kit 25 / Bag
LE Orthotics – MiscellaneousGaffney Bumpers
� Molded Urethane Bumper (Bag of 10 / drill)
SKU Description UOM
B-1000 5/16" Each
B-2000 3/8" Each
3 9
T h e C o m p o n e n t R o o m – L o w e r
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Notes