Toll-Free North America 1.800.661.5547Kost Klip Manufacturing Ltd. | www.kostklip.com | sales@kostklip.com

Ticket-Molding-Best-Practices_081414 | Printed in Canada

ticket molding BEST PRACTICES

Get the best use out of your shelf edge ticket moldings by following kostklip’s recommendations and best practices. This document outlines how to store, install and use your ticket moldings to maintain them.

INSTALLATION

Clip-In

Flat Mount Tape Back

Clip-Over

There are different types of ticket moldings depending on the type of fixture they fit. The following are the most common types:

Start at one end and insert the bottom of the back leg into the bottom lip of the price channel.

Ensure that the application surface is clean and dry.

Starting at one end, hook the top of the ticket molding over the top lip of the shelf fixture.

Push the top of the ticket molding into the channel to snap the top into the upper lip of the price channel.

Remove the tape backing from the ticket molding

Press the ticket molding over the bottom lip and press the ticket molding over the rest of the fixture.

Press along the rest of the ticket molding with your thumb or installation tool to clip into the remaining length of the shelf.

Line up the molding and press the molding against the application surface.

For rounded fixtures, pinch the back leg over the fixture to secure the ticket molding.

INSTALLATION TIPS

Most ticket moldings fit best on the first installation, avoid removing and re-installing the same piece as it may get damaged each time.

Use ticket moldings with foam tape for bottom shelves for more durable application. For freezers and coolers, ensure that the application surface is clean and dry.

Use sharp shears or scissors to cut ticket moldings down to length as necessary.

Use the shelf edge tool to avoid finger burn.

For curved shelves, use shorter pieces of ticket molding so the window can be opened.

1

1

1

2

2

2

3

3

3

Toll-Free North America 1.800.661.5547Kost Klip Manufacturing Ltd. | www.kostklip.com | sales@kostklip.com

Ticket-Molding-Best-Practices_081414 | Printed in Canada

CHANGING TICKETS CAUTIONARY NOTES

Paper Tickets for ClearVision®

Printed Plastic ShelfTalkers™

ClearGrip™

The clear, flexible window of ClearVision® and ClearGrip™

ticket moldings hold, display and protect paper price tickets.

8-12 pt cardstock paper orkostklip’s Printed Plastic ShelfTalkers™ with GripLocks™

Specially designed one-fold, 12 gauge PVC sign protector

Tearing a paper sign across the ticket molding can leave paper debris in the grip that is difficult to remove.

Kostklip’s ClearGrip™ ticket moldings are designed to be used with:

Use your thumb and press the bottom of the ticket molding to open the window.

Open the window with your thumb or shelf edge tool.

To insert a ShelfTalker™ or sign protector, start by inserting one corner into the ClearGrip™.

Alternatively, use the shelf edge tool to open the window.

Place the back leg behind both the clear window and paper price ticket.

Pivot up and insert the rest of the ShelfTalker™ or sign protector into the grip.

Lock the boot into the bottom of the ticket molding for a secure grip.

Insert the paper ticket into the window.

To remove the sign, take out one corner at a time using a downward pulling motion.

The clear window can hold up to 0.025" thickness of material, that is two PerfPaper™ tickets and one printed plastic ShelfTalker™—any greater thickness can distort the window.

Inserting materials thicker than the recommended range permanently damages the grip and no longer holds signs properly, e.g. ClearVision® ShelfTalkers™ or double-layer sign.

1

1

1

2

2

2

3

3

3

STORAGEAvoid stacking heavy items on top of ticket molding boxesKeep out of direct sunlightStorage environment should not exceed 38°C/100°F