Thermal energy - BIOENERGY

thermal energy

091

What is thermal energy?Thermal solar power consists in the use of sun’s energy to heat thus to produce hot water, heating, temperature control for swimming pools or any other application that involves a raise of a liquid’s temperature.

It requires the installation of thermal panels.

It is a very useful resource both for several domestic and industrial applications.

fotovoltaica | bipvthermal energy | intro

092

fotovoltaica | bipvthermal energy | collectors

our solar collectors

BIOENERGY solar collectors are manufactured under the strictest quality standards. They have a copper continuous absorber with a selective BLUETEC treatment, welded to a copper grid collector. Absorber’s weldings are carried out by induction and each single unit produced undergoes a 15 bar water - tightness test.

The frame is made up of high quality anodized aluminum (AL-6063 T5). The frontal transparent cover is a tempered low-iron solar glass of high resistance and low emissivity. The back cover is a thermal Polyethylene sheet. The whole process has ISO 9001 and ISO 14001 certifications. Our Solar collectors have been awarded with the NPS and SOLAR KEYMARK certifications.

one solution for each demand

BIOENERGY has developed three product lines being the aim to cover any installation requirements always bearing in mind our philosophy: supplying high quality products at really competitive prices.

BIOENERGY 1 series is designed for installations at high radiation level locations.

BIOENERGY 2 series is the most complete and versatile, being appropriate for any climate condition.

BIOENERGY 3 series has the highest performance and has been created for the most exigent installations even those located in low radiation areas.

1 SERIES

2 SERIES

3 SERIES

093

fotovoltaica | bipvthermal energy | collectors

TECHNICAL FEATURES

T11180 T11200Length (mm) 1.860 2.056Width (mm) 1.056 1.056Depth (mm) 73,4 73,4Total area (m2) 1,96 2,17Weight (kg) 30,6 34,0η (%) 74,60 74,60a1 (W/m2 · K) 4,57 4,57a2 (W/m2 · K2) 0,012 0,012

1 Series

TECHNICAL FEATURES

T12180 T12200 T12240 T12250 T1225HLength (mm) 1.861 2.098 2.098 2.177 1.257Width (mm) 1.056 1.056 1.256 1.256 2.176Depth (mm) 94,5 94,5 94,5 94,5 96,0Total area (m2) 1,97 2,22 2,64 2,73 2,74Weight (kg) 35,5 40,0 47,0 48,0 51,0η (%) 75,70 75,70 75,70 76,90 75,90a1 (W/m2 · K) 3,994 3,994 3,994 3,957 4,241a2 (W/m2 · K2) 0,009 0,009 0,009 0,010 0,003

2 Series

TECHNICAL FEATURES

T13200 T13240 Length (mm) 1.911 2.177Width (mm) 1.161 1.161Depth (mm) 104,7 104,7Total area (m2) 2,22 2,52Weight (kg) 48,0 54,0η (%) 79,20 79,70a1 (W/m2 · K) 3,722 3,756a2 (W/m2 · K2) 0,018 0,016

3 Series

WIDTH

DEPTH

LENGTH

094

fotovoltaica | bipvthermal energy | accumulators

our solar accumulators

BIOENERGY has a wide range of accumulators for all types of solar applications.

Robust accumulation systems of high thermal transference and with an outdoors finishing, manufactured in stainless steel 316L and double vitrified USD 37.2 steel.

Before their launch to the market, our accumulators and interaccumulators were subjected to efficiency, pressure and durability tests in different approved institutes obtaining the corresponding certificates that guarantee their reliability and finishing.

TECHNICAL FEATURES

Volume (L) Dimensions (mm) Weight (kg)T53152 150 550 x 1120 45T53202 200 550 x1370 55 T53302 300 650x1420 75T53502 500 750x1730 100 T53752 750 1000x1850 150T53102 1000 1000x2100 170

Hot water vertical interaccumulatorsMade of double-glazed stainless steel. Exchange tube bundle made of double-glazed steel.PVC sheet external finish with a thermoforming PST top cover.

TECHNICAL FEATURES

Volume (L) Dimensions (mm) Weight (kg)T531M2 1500 1050x2410 210T532M2 2000 1200x2460 245T5325M2 2500 1350x2550 280T533M2 3000 1350x2750 310T534M2 4000 1500x2800 470T535M2 5000 1700x2830 555

Vertical interaccumulators for large installationsManufactured with CERAMPLAST-treated steel. Removable exchange tube bundle of stainless steel.PVC sheet external finish.

095

fotovoltaica | bipvthermal energy | accumulators

TECHNICAL FEATURES

Volume (L) Dimensions (mm) Weight (Kg)T53201 200 550 x 1370 46T53301 300 650 x1420 56T53501 500 750x1730 81T53751 750 900x1850 116 T53101 1000 900x2060 131

Vertical accumulators for hot waterMade of double-glazed stainless steel. Exchange tube bundle of double glazed steel. PVC sheet external finish with a thermoforming PST top cover.

TECHNICAL FEATURES

Volume (L) Dimensions (mm) Weight (Kg)T531M1 1500 1050x2370 250T532M1 2000 1200x2420 305T5325M1 2500 1350x2480 355T533M1 3000 1350x2730 385 T534M1 4000 1500x2800 560T535M1 5000 1700x2835 665

Vertical accumulators for large installationsManufactured with CERAMPLAST-treated steel. Exchange tube bundle of removable stainless steel.PVC sheet.external finish.

Interaccumulator / accumulator Volume (L) Dimensions (mm) Weight (Kg)T55302 / T55301 300 650x1400 90/75T55502 / T55501 500 750x1630 139/115T55852 / T55851 750 790x1805 167/140T55102 / T55101 1000 790x2055 181/150T551M2 / T551M1 1500 1150x2350 230/200T552M2 / T552M1 2000 1300x2400 265/265T54500 500 755x1670 150T54700 700 755x2090 170T54850 850 990x1920 190T541000 1000 900x2170 200T541500 1500 1150x2240 320T542000 2000 1300x2310 360

Inertia and multifunction vertical accumulatorsInertia accumulators are made of steel which is externally painted with rigid insulation finished with a PVC 50mm injection for 200-500 liters and flexible and 100mm thickness for 800-2000 liters.Multifunction accumulators have inside a stainless steel hot water tank while the outer tank made of glazed steel incorporates a heating coil.

TECHNICAL FEATURES

096

fotovoltaica | bipvthermal energy | structures

our support structures

Structures made of aluminum AL-6063 T5 with standardized profiles further anodized to give greater strength and durability against harsh environments. BIOENERGY support structures comply with AE NB-88 current regulations on structural modules manufacturing for equipment support on buildings. Delivered preassembled, packaged in cardboard box with rigid stainless steel hardware and a use and installation manual (includes indications for several module inclinations).

VERTICAL COLLECTOR

T41100 Support structure for one solar collector on flat roof (adjustable from 35 to 55º)

T41200 Extra collector expansion Connectable with T42100 model

HORIZONTAL COLLECTOR

T42100 Support structure for one solar collector on flat roof (adjustable from 35 to 55º)T42200 Extra collector expansion Connectable with T41100 model

Flat roof structure

VERTICAL COLLECTOR

T430A1 Support structure for one solar collector on sloped roof: PERFORATING ANCHORAGET430A2 Support structure for two solar collectors on sloped roof: PERFORATING ANCHORAGET430S1 Support structure for one solar collector on sloped roof: SLATES ANCHORAGET430S2 Support structure for two solar collectors on sloped roof: SLATES ANCHORAGE

HORIZONTAL COLLECTOR

T430A3 Support structure for one solar collector on sloped roof: PERFORATING ANCHORAGET430S3 Support structure for one solar collector on sloped roof: SLATES ANCHORAGE

IN ROOF (integrated on deck)

T4401P In-roof structure for one solar collectorT4402P In-roof structure for two solar collectorsT4403P In-roof structure for three solar collectorsT4404P In-roof structure for four solar collectorsT4405P In-roof structure for five solar collectors

Sloped roof structure

098

fotovoltaica | bipvthermal energy | thermosyphon

The 150 liter thermosyphon kit includes:

- One T11180 or T12180 solar collector - One 145 liters solar interaccumulator with expansion vessel- One galvanized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- Two flexible and insulated stainless steel pipes - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives

Models:T21151 - Collector serie 1 for flat roofsT21152 - Collector serie 2 for flat roofsT22151 - Collector serie 1 for sloped roofs (perforating anchorage)T22152 - Collector serie 2 for sloped roofs (perforating anchorage) T23151 - Collector serie 1 for sloped roofs (slates anchorage)T23152 - Collector line 2 for sloped roofs (slates anchorage) th

erm

osy

ph

on 1

50L

TECHNICAL FEATURES

T21151 / T22151 / T23151 T21152 / T22152 / T23152Solar collectorUnits 1 1 Net area (m2) 1,77 1,77 Manufacturing Copper absorber with selective BLUETEC treatment, fiberglass insulation, anodized aluminum housing and tempered glass

Optical performance η (%) 74,60 75,701st loss factor (W/m2 · K) 4,570 3,9942nd loss factor (W/m2 · K2) 0,012 0,009Solar accumulatorHot water volume (L) 145 145Manufacturing USD Steel with a 37.2 2.5 mm thickness in the tank and 1.5 mm double enamel with double-glazed complying with DIN 4753

Dimensions ( x mm) 500x1300 500x1300Structure Anodized and machined aluminum or galvanized steel (flat or inclined version) complying with NB/AE-88 standard

Empty weight (kg) 127 130Working weight (kg) 282 285

099



- One T11200 or T12200 solar collector - One 145 liters solar interaccumulator with expansion vessel- One galvanized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- two flexible and insulated stainless steel pipes - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives

Models:T21201 - Collector serie 1 for flat roofsT21202 - Collector serie 2 for flat roofsT22201 - Collector serie 1 for sloped roofs (perforating anchorage)T22202 - Collector serie 2 for sloped roofs (perforating anchorage)T23201 - Collector serie 1 for sloped roofs (slates anchorage)T23202 - Collector line 2 for sloped roofs (slates anchorage)

ther

mo

syp

ho

n 2

00L

TECHNICAL FEATURES





100



- Two T11180 or T12180 solar collector - One 282 liters solar interaccumulator with expansion vessel- One galvanized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- Two flexible and insulated stainless steel pipes - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives

Models:T21301 - Collector serie 1 for flat roofsT21302 - Collector serie 2 for flat roofsT22301 - Collector serie 1 for sloped roofs (perforating anchorage)T22302 - Collector serie 2 for sloped roofs (perforating anchorage)T23301 - Collector serie 1 for sloped roofs (slates anchorage)T23302 - Collector line 2 for sloped roofs (slates anchorage)

ther

mo

syp

ho

n 3

00L

TECHNICAL FEATURES





101


The cover tank thermosyphon kit includes:

- One or two T11180 or T11200 and T12180 or T12200 solar collectors - One 145, 192 or 282 liters solar interaccumulator with expansion vessel- One galvanized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- Two flexible and insulated stainless steel pipes - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives

Models:T24151 - Collector serie 1 for flat roofsT24152 - Collector serie 2 for flat roofsT24201 - Collector serie 1 for flat roofsT24202 - Collector serie 2 for flat roofsT24301 - Collector serie 1 for flat roofsT24302 - Collector serie 2 for flat roofsth

erm

osy

ph

on co

ver

tan

k

TECHNICAL FEATURES

T24151 / T24201 / T24301 T24152 / T24202 / T24302Solar collectorUnits 1 / 1 / 2 1 / 1 / 2 Net area (m2) 1,77 / 1,96 / 3,54 1,77 / 2,00 / 3,54 Manufacturing Copper absorber with selective BLUETEC treatment, fiberglass insulation, anodized aluminum housing and tempered glass

Optical performance η (%) 74,60 75,701st loss factor (W/m2 · K) 4,570 3,9942nd loss factor (W/m2 · K2) 0,012 0,009Solar accumulatorHot water volume (L) 145 / 192 / 280 145 / 192 / 280Manufacturing USD Steel with a 37.2 2.5 mm thickness in the tank and 1.5 mm double enamel with double-glazed complying with DIN 4753

Dimensions ( x mm) 500x1300 / 580x1300 / 580x1800 500x1300 / 580x1300 / 580x1800Structure Anodized and machined aluminum or galvanized steel (flat or inclined version) complying with NB/AE-88 standard

Empty weight (kg) 127 / 150 / 198 130 / 155 / 204Working weight (kg) 282 / 354 / 494 285 / 359 / 500

102

fotovoltaica | bipvthermal energy | forced kit

forc

ed 1

50L

TECHNICAL FEATURES

T3115P1 / T3115A1 / T3115S1 T3115P2 / T3115A2 / T3115S2Solar collectorUnits 1 1 Net area (m2) 1,77 1,77 Manufacturing Copper absorber with selective BLUETEC treatment, fiberglass insulation, anodized aluminum housing and tempered glass

Optical performance η (%) 74,60 75,701st loss factor (W/m2 · K) 4,570 3,9942nd loss factor (W/m2 · K2) 0,012 0,009Solar accumulatorHot water volume (L) 150 150Manufacturing Steel S 235JR 2.5 mm thickness double-glazed according to DIN 4753


Empty weight (kg) 83,5 88,5

150 liter forced kit includes:

- One T11180 or T12180 solar collector - One 150 liters solar interaccumulator - One anodized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- One solar station provided with thermostat with 3 inputs, one output and a circulation pump - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives

Models:T3115P1 - Collector line 1 for flat roofsT3115P2 - Collector line 2 for flat roofsT3115A1 - Collector line 1 for sloped roofs (perforating anchorage)T3115A2 - Collector line 2 for sloped roofs (perforating anchorage)T3115S1 - Collector line 1 for sloped roofs (slates anchorage)T3115S2 - Collector line 2 for sloped roofs (slates anchorage)

103



- One T11200 or T12200 solar collector - One 200 liters solar interaccumulator - One anodized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- One solar station provide with thermostat with 3 inputs, one output and a circulation pump - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives


forc

ed 2

00L

TECHNICAL FEATURES




Empty weight (kg) 92 98

104



- Two T11180 or T11800 solar collectors - One 300 liters solar interaccumulator - One anodized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- One solar station provide with thermostat with 3 inputs, one output and a circulation pump - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives


forc

ed 3

00L

TECHNICAL FEATURES





105



- Three T11200 or T12200 solar collectors - One 500 liters solar interaccumulator - One anodized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- One solar station provide with thermostat with 3 inputs, one output and a circulation pump - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives


forc

ed 5

00L

TECHNICAL FEATURES





106



- Four T11200 or T12200 solar collectors - One 750 liters solar interaccumulator - One anodized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- One solar station provide with thermostat with 3 inputs, one output and a circulation pump - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives


forc

ed 7

50L

TECHNICAL FEATURES


Optical performance η (%) 74,60 75,701st loss factor (W/m2 · K) 4,570 3,9942nd loss factor (W/m2 · K2) 0,012 0,00KSolar accumulatorHot water volume (L) 750 750Manufacturing Steel S 235JR 2.5 mm thickness double-glazed according to DIN 4753



107



- Five T11200 or T12200 solar collectors - One 1000 liters solar interaccumulator - One anodized steel support structure for flat or sloped roofs- One complete set of fittings and valves with expansion tank- One solar station provide with thermostat with 3 inputs, one output and a circulation pump - One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives


forc

ed 1

000L

TECHNICAL FEATURES



Dimensione ( x mm) 1000x2100 1000x2100Structure Anodized and machined aluminum or galvanized steel (flat or inclined version) complying with NB/AE-88 standard


108

fotovoltaica | bipvthermal energy | drain-back kit

150 liters drain-back kit includes:

- One T12180 or T11180 solar collector - One 150 liters solar interaccumulator - One anodized aluminum frame for flat or sloped roof- One complete set of fittings and valves with expansion tank- One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives

Models:T3315P1 - Collector line 1 for flat roofsT3315P2 - Collector line 2 for flat roofsT3315A1 - Collector line 1 for sloped roofs (perforating anchorage)T3315A2 - Collector line 2 for sloped roofs (perforating anchorage)T3315S1 - Collector line 1 for sloped roofs (slates anchorage)T3315S2 - Collector line 2 for sloped roofs (slates anchorage)d

rain

-bac

k 15

0L

TECHNICAL FEATURES


Optical performance η (%) 74,60 75,701st loss factor (W/m2 · K) 4,570 3,9942nd loss factor (W/m2 · K2) 0,012 0,009Solar accumulatorHot water volume (L) 168 168Manufacturing Fixed deposit and vitrified steel coil



VIT

RIF

IED

STE

EL

109



- One T11200 or T12200 solar collector - One 200 liters solar interaccumulator - One anodized aluminum frame for flat or sloped roof- One complete set of fittings and valves with expansion tank- One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives.


rain

-bac

k 20

0L

TECHNICAL FEATURES

T3320P1 / T3320A1 / T3320S1 T3320P2 / T3320A2 / T3320S2Solar collectorUnits 1 1 Net area (m2) 1,96 2 Manufacturing Copper absorber with selective BLUETEC treatment, fiberglass insulation, anodized aluminum housing and tempered glass




VIT

RIF

IED

STE

EL

110



- Two T11180 or T12180 solar collectors - One 300 liters solar interaccumulator - One anodized aluminum frame for flat or sloped roof- One complete set of fittings and valves with expansion tank- One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives.


dra

in-b

ack

300L

TECHNICAL FEATURES





VIT

RIF

IED

STE

EL

111





rain

-bac

k 15

0L

TECHNICAL FEATURES


Optical performance η (%) 74,60 75,701st loss factor (W/m2 · K) 4,570 3,9942nd loss factor (W/m2 · K2) 0,012 0,009Solar accumulatorHot water volume (L) 150 150Manufacturing Fixed deposit and stainless steel coil


Empty weight (kg)

STA

INLE

SS S

TEEL

112





rain

-bac

k 20

0L

TECHNICAL FEATURES

T3420P1 / T3420A1 / T3420S1 T3420P2 / T3420A2 / T3420S2Solar collectorUnits 1 1 Net area (m2) 1,96 2 Manufacturing Copper absorber with selective BLUETEC treatment, fiberglass insulation, anodized aluminum housing and tempered glass


Dimensions ( x mm) 560x1520 510X1430Structure Anodized and machined aluminum or galvanized steel (flat or inclined version) complying with NB/AE-88 standard


STA

INLE

SS S

TEEL

113



- Two T11180 or T12180 solar collectors - One 1500 liters solar interaccumulator - One anodized aluminum frame for flat or sloped roof- One complete set of fittings and valves with expansion tank- One 5 liters bottle of anti-freezing at 95% with anti-corrosion additives.


dra

in-b

ack

300L

TECHNICAL FEATURES



Dimensions ( x mm) 560x2020 510X1430Structure Anodized and machined aluminum or galvanized steel (flat or inclined version) complying with NB/AE-88 standard


STA

INLE

SS S

TEEL

Documents

Thermal energy - BIOENERGY