Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
4 GEARS May 2014
The Mystery of the Rotating Bearing!
There are days when you spend lots of time investigating prob-lems only to come up short or
the trail runs dry. Today we’re dealing with U660E issues that, until now, were a mystery.
The U660E appeared in the Lexus ES350 and the Toyota Camry in 2007 and were followed by five additional
models in the U.S. over the next four years:
• RX350 2010-13• Avalon 2008-12• Highlander 2008-12• Sienna 2010-13• Venza 2009-13About six months ago we started
seeing Toyotas with multiple com-
plaints: harsh or erratic shifts, engage-ment problems, and converter clutch issues. All of the transmissions were torn down for repair. The only prob-lems found were sticking valves and a fine metal in the pan.
Not one component appeared to be damaged, but the valve body bores and solenoids were clogged with a fine
Figure 1
STREET SMART
by Mike Brownmembers.atra.com
The Mystery of the Rotating Bearing! Toyota U660E shift problems traced
back to case wear and damage; the fix requires replacing the case.
1brown514.indd 4 4/28/14 4:06 AM
raybestospowertrain.com I [email protected] I 1.800.729.7763
Like us at facebook.com/RaybestosPowertrain or follow us at twitter.com/RaybestosPower for exclusive giveaways and offers.
Raybestos Stage-1 Performance frictions are an affordable solution for performance applications that may not require the capacity of the Gen2 Blue Plate Special, but do require a friction plate that can handle the demands that a stock tan or high energy plate cannot. Stage-1 frictions are not limited to performance, but also enhance heavy duty applications by increasing holding capacity, while being able to withstand higher temperatures associated with towing heavy loads. Raybestos Stage-1 Performance frictions are the best choice for street rods, tuner cars and mild street strip applications.
The Gen2 Blue Plate Special, the ultimate racing clutch for automatic transmissions, is the perfect clutch for ALL TYPES of racing. It features an improved Raybestos-developed material that offers optimum shifting at a level above standard racing clutches. It provides a positive engagement under high power conditions where all of the energy absorption is condensed into a very short length of time. Gen2 is a state-of-the-art, power absorbing clutch that performs with very low wear, excellent fatigue strength, high durability and quick shifts with little shock for even faster times.
street or strip, what’s your terrain?
raybestos 414.indd 2 4/1/14 12:32 AM
6 GEARS May 2014
The Mystery of the Rotating Bearing!
aluminum. As the investigation went from days, to weeks, to months, shops were being inundated with this prob-lem.
As with any investigation you need the facts. Here are the facts of this situ-ation:• We have metal throughout the
transmission; fine metal.• We have sticking valves and worn
bores caused by this metal.• We have torque converter slip and
ratio codes associated with it.
I made sure that the next time a U660E failure occurred I would be there. Then it happened: We got a trans-mission in with the exact conditions we were hearing about. It was time to interrogate the subject!
During the unit teardown I found a very interesting issue with the coun-terdrive gear double ball bearing in the case (figure 1). It moved! It rotated in the case, freely, without resistance. But, when I attempted to remove the bear-ing, it felt like something was holding it in place.
Turns out the bearing is installed in the case and has a snap ring to secure it (figure 2). It’s supposed to be a non-removable bearing, but Toyota sells a replacement.
So the bearing was spinning in the case, which created the fine metal, which, in turn, caused the shifting issues and torque converter slip. But we hadn’t discovered why the bearing was spinning in the case. It was time to dig a little deeper!
Then we noticed something even more interesting: Nothing was dam-aged except the case where the center bearing rides. A closer examination revealed the front of the case was close to specification but the rear was way off (Figure 3).
Figure 2
Figure 3
Turns out the bearing is installed
in the case and has a snap ring to
secure it.
1brown514.indd 6 4/28/14 4:06 AM
800.940.0197 • www.wittrans.com
FOR QUALIFIED TRANSMISSION SHOPS ONLYWIT offers remanufactured automatic and manual transmissions. Each
transmission is fully dyno-tested and includes a 12 month/unlimited mile warranty on parts and workmanship*. Extended 2 and 3 year
warranties on parts and/or labor available*. WIT also distributes a complete line of quality new, used and remanufactured automatic and
standard transmission parts.*Excludes Commercial and Off-Road Vehicles
In stock for YOU, not your customers!wit plc 1012.indd 2 10/4/12 2:55 AM
8 GEARS May 2014
The Mystery of the Rotating Bearing!
So what was happening was sim-ply a torque issue. The unit is pretty beefy for a front wheel drive: The ring gear and carrier weigh 45 lbs. and the two transfer gears are fairly stout (Figure 4). That’s all at the front of the transmission. It’s the back half that’s having the issue.
From the center of the case the planetary is connected to the transfer gear by splines and a lock nut. The planetary is then splined to the sun gear, direct ring gear, and finally to the end clutch (Figures 5 & 6). The sheer torque of the unit, especially those mated to
Figure 5
Figure 4
The ring gear and carrier weigh 45 lbs. and the two
transfer gears are fairly stout. That’s all at the front of the transmission. It’s the back half that’s having the
issue.
Case Support Point
Case Support Point
1brown514.indd 8 4/28/14 4:06 AM
23869-12FPV DP 1036319FCSD-00013Ad-MagazinePark PrePress
2012 Powertrain Ad Revision
E. Luckhardt
M. Sasinowski
7” x 10”see above8.625” x 11.125”CMYK
300100%100%FCSD00013_2386912_PG
K. Pohl
J. Sparrow
C. TalbotK. GontaR. Cassel
G. Spens
3 1 02/14/12
Trim Sizes:A. 8.5" x 11" — Fleet MaintenanceB. 8.125” x 10.875” — Gears, Transmission Digest, Police Fleet ManagerC. 7.875” x 10.75” — Work Truck, Automotive Fleet, Business Fleet,
Government FleetD. 7.875" x 10.5" — MotorE. 7.750” x 10.5” — Motor Age
Bleed
Bleed Bleed
Bleed
Live
Live Live
Live
Bleed
Bleed
Bleed
Bleed
Live
Live
Live
Live
A
A
C
C C
C
BA
BA
BA
BA
D,E
D,E D,E
D,E
A
B E E
B E E
B
B
AC,D
C,D
C,D
C,D
A higher level.
That’s what you get with Ford gas engines and transmissions.A higher build level means you’re getting engine and transmission assemblies built to the exacting specifi cations of Ford Motor Company. So you not only get the quality build you expect in an assembly from Ford, but also one that’s built by using parts that keep it specifi c to year, make and model as well as emissions calibrations.
3-Year/Unlimited-Mile Warranty – No Commercial ExceptionsFord gasoline engines and transmissions are covered by a three-year/unlimited-mile warranty.* All warranties are backed by Ford Motor Company. They’re also supported by more than 3,000 Ford and Lincoln Dealerships nationwide as well as at their originating place of service.
Plus, unlike some competitors, this warranty is good for fl eet vehicles. That means you get the same advantages and coverage for commercial use, no exceptions.
For technical questions, contact the Ford Powertrain Assistance Center at 1-800-392-7946 or visit FordParts.com.*See dealer for limited-warranty details. Remanufactured diesel engines are covered by a two-year/unlimited-mile warranty.
FCSD00013_2386912_PG_R03.indd 1 2/14/12 1:15 PM
ford fm feb 2012 for 514.indd 2 5/1/14 9:11 AM
10 GEARS May 2014
The Mystery of the Rotating Bearing!
3.5L and 3.7L V6 engines, is what’s causing the issue. It’s literally flexing the case where the bearing contacts it.
As it stands right now there’s no aftermarket fix for this condition. It’s a costly repair, requiring you to replace the case. And there’s nothing to stop it from happening again.
For now you can get a used case for about $175. Make sure the bearing is tight; if the bearing moves, that case is bad, too.
If a good used case isn’t available, you’ll need a new case from the dealer, part #35141-07011, at a cost of nearly $1,200. You’ll also need a bearing for about $110, part #90369-72001, and a new snap ring for another $2.43; part #90520-99110.
The Toyota service manual says you can press the bearing out and replace it with a one. You can’t! We tried to cut it out with die grinders but that didn’t work. So we used a cutting
torch to cut it out, just to check the case, measure it, and report the information to the industry.
When the bearing starts to rotate, it sends metal throughout the unit, solenoids, valve body bores, planets — everywhere you look, it’s there. That’s followed by a flare on the shift because the solenoid is clogged with metal from the planet.
Book ’em Dan-O! We found the answer to our mystery… well the cause at least. I’m sure it won’t be long before the aftermarket comes up with sleeves or boring tools with a new sleeve and bearing, but, until then, be aware of this issue. If you miss it, it’ll cost you a comeback.
Case closed!
Figure 6
As it stands right now there’s no aftermarket fix
for this condition. It’s a costly repair,
requiring you to replace the
case. And there’s nothing to stop it from happening
again.
Center
1brown514.indd 10 4/28/14 4:06 AM
The�powerhousein�POWERTRAIN.
800 257 7418 • [email protected]
RMP POWERTRAIN SOLUTIONS
• Full Line of Domestic and Import Remanufactured Transmissions, Light to Heavy Duty• 3 yr/100,000 Mile Nationwide Warranty• Nationwide Distribution• Largest Inventory in the Industry
A LEADER IN QUALITY POWERTRAIN FOR OVER 60 YEARS
C
M
Y
CM
MY
CY
CMY
K
Powertrain ad POW.eps 1 2/6/14 4:19 PM
rmp 314.indd 2 2/24/14 8:50 AM