The MagPulse

7/27/2019 The MagPulse

1/22

The MagPulse (c) Magnum

Models SP and SLP

This page was last updated on August 19th, 2008; please check back for further additions. Thanks for

visiting!!

FEATURES:

High Efficiency MOSFET Output Drive For One Magnetic Pulser Transducer

/ Coil Output Channel

Specialized custom drive circuitry design uses brief pulses with very fastwaveform rise and fall times to produce intense output magnetic pulses from

the driven coils, while consuming a minimum of input power. This results in


2/22

producing very dynamic magnetic pulses at the selected frequency, while at

the same time producing minimal heating of the driven coils.

11 easily selectable preset frequencies, as well as in internal adjustable

frequency generator .Output frequency range of the internal frequency

generator is adjustable from ~3.8 Hz up to a set upper limit of 6000 Hz.

The eleven preset (rotary switch selectable) frequencies offered on the Model

SP are: 15, 326, 465, 528, 727, 880, 2008, 2128, 2250, 2563 Hz

The Model SLP has 11 specially selected preset (rotary switch selectable)

Lyme frequencies, arranged in sequence [864, 744.4, 528, 624, 663, 494, 482,

326, 435.3, 517.5, 456 Hz]

[You can optionally have a custom facepanel model made for your researchpurposes, with your own different set of eleven selectable preset frequencies,

for an additional customization charge of $80.00 ; call to discuss this option.]

The photo at the left

shows one of the 2007

generation of

MagPulse Magnum (c)

coils. It has a separate

lead and 5 pin DIN

plug to control theLEDs in the core of

this device. 24 LEDs in

from one to four colors

can be built into the

core of each MagPulse

Magnum Coil. The

switches on the control

panel allow for

activating each color of LEDs individually, and all colors could be activated

simultaneously if desired.

Like all of the MagPulse Magnum, Spectrum, and DC36SS systems, The

MagPulse Magnum SP / SLP systems utilize an additional separate output

drive channel for the LED arrays built into the core of the MagPulse Magnum

Series Coils, with from one up to four colors of selectable Monochromatic

LED Pulsed Light incorporated into their specially designed cores. While very

brief pluses are used to produce the dynamic output magnetic signals radiated

from any coils, the LED arrays are driven at a ~50% duty cycle for optimum

response, while still being synchronized with the magnetic output signals.


3/22

Due to it's special design, the 2007 generation of MagPulse Magnum(c) Coils

produce ~47% Higher Pulsed Magnetic Field Intensity than that produced by

the 'RA12' coils. These coils are encapsulated in specialized organic resins and

other selected materials, with a 'tachionized' and specially 'activated' and

'harmonized' Orgonite core array, to interface the coil's pulsed light and

magnetic resonances with the body's energy field in optimal ways. (This core

design is the result of six years of progressive research & development.)

VARIABLE VOLTAGE POWER SUPPLY


4/22

MagPulse Magnum SP / SLP model rear panel showing

simple connection to the power supply:


5/22

To hook up the Power System

Watch the polarity carefully, connecting the red + connectors to the proper

red-marked terminals, and the other black connectors to the black marked

terminals.

DO NOT REVERSE OR SHORT OUT

THESE CONNECTIONS!!!

The photo below shows a frequency reading meter connected into the jacks on

a similar control system, so that the researcher has a display of the frequency

being set when the internal frequency generator is being used. The meter

shown is the model 220-811 from Radio Shack, which has the capability ofdisplaying lower frequencies with .1 Hz resolution, so that you you can closely

set frequencies such as 7.8 Hz, 10.1 Hz, or 15.2 Hz.


6/22


7/22

The photo below shows one of the "RA12" coils plugged into the MagPulse

Magnum model SP system. It is made from 12 gauge wire with 8 feet of high-

flex wire leads and banana connector soldered on the ends. The green and

violet leads plug into matching color jacks on the control panel. (These arevery similar to the coil used with the "HPMP" system.)

WARNING!! NEVER plug in or unplug a coil while the power is turned on!

Doing so is the one thing which may destroy the MOSFETS. (Such avoidable

damage is not covered by the warranty, but if repairs are needed, they are

available on a time-and-materials basis.)

The MagPulse Magnum offers the researcher the ability to easily select oneof the eleven preset frequencies; it also has an internal adjustable frequency

generator, which can be used to dial up any desired frequency from under 4


8/22

Hz up to 6000 Hz. (It can actually have the upper limit adjustment reset to

generate frequencies well over 10,000 Hz if desired; power consumptionincreases at higher frequencies, however.) BR>

Instructions for use of the Internal Frequency Generator Controls

t first glance, the panel may look a bit complicated, but it shouldn't take long

to understand how to operate the MagPulse Systems. It was designed for

simplicity of setup and operation, for those who don't want to mess with

external frequency synthesizers or computers.

STARTUP CHECK LIST:: BEFORE TURNING ON THE SYSTEM FOR THE

FIRST TIME:

1: Check: Coil / transducer plugged into the color coded jacks BEFORE power is

ever turned on!

2: Plug in your frequency reading meter into the "FREQUENCY

COUNTER" jacks on the lower left corner of the system's front panel, and set

the meter to display frequency.

When you turn ON the POWER switch , you will see the "ON" green LED

indicator light up, and hear the cooling fan o start to run quietly. The Frequency

reading meter will begin to display a frequency in Khz, As a decimal portionthereof.[Keep in mind that 1 Khz = 1.000 Khz = 1000 Hz]

SETTING A FREQUENCY USING THE 4 FREQUENCY SETTING

CONTROL KNOBS

In setting a frequency, if for example you wanted to set it for the lowest

possible setting, you would need to start with all of the frequency setting knobs

at their minimums, rotated fully counter-clockwise. When using the Radio

Shack 220-811 meter, as an example, it may display 3.7 Hz to 3.8 Hz when all 4

frequency setting control knobs are set fully counter-clockwise.

(You can set the frequency output to any desired frequency from just below 4

Hz to just over 6KHz. The upper end of the adjustment range is set just over

the 6 Khz limit to allow the best resolution when using these controls to set

higher frequencies.)

General Overview note: now is a good time to clarify that these 4 frequency

setting controls, are 'daisy-chained' or connected in series; the frequency

generating circuitry only sees the collective sum of how all 4 of these knobs are

set- it doesn't see each one separately. They are labeled from left to right:

"LOW, INTERMEDIATE, HIGHER, and HIGHEST. The First control is the


9/22

coarsest adjustment with the widest range; it also needs to be adjusted

through it's full clockwise travel range before the other knobs can be used to

set a higher frequency. The 4th frequency setting control at the right end,

labeled as "FINEST & FINE TUNING" adjusts over a very small range,

When you turn any control knob clockwise through it's range of travel, the

frequency of the system's output goes higher, as displayed on the frequency

counter. When the LOW knob has been rotated fully clockwise, you begin

turning the INTERMEDIATE knob clockwise through it's full range of travel;

when that control knob has been rotated fully clockwise through it's range of

travel, you'll begin to use the 3rd "HIGHER" knob in the same way to increase

the frequency higher.

Since all 4 of these controls are connected in series, or 'daisy-chained"

together, the output frequency is affected by all of their settings collectively.When setting a low frequency on the first LOW control's range, any of the

other control knobs can be used to have finer resolution for fine-tuning. Unless

the first three control knobs are set to their fully clockwise position, you can

not set a frequency close to the upper end of the adjustment range with the

"HIGHEST & FINE TUNING control knob. By adjusting these controls while

watching the resulting frequency display on the frequency reading meter, you

will quickly become familiar with the frequency setting process.

CONTROLLING THE LED ARRAY IN THE CORE OF

THE MAGPULSE MAGNUM COILS

The MagPulse Magnum coils are built with from one up to four colors of

LEDS in the core, allowing use of synchronized light of selected colors. While

the magnetic pluses are very brief and abrupt for maximum effect in inducing

resonances, this system uses a separate drive channel to drive these LED

arrays at a ~50% duty cycle for optimum response. The leading edge of the

magnetic and light pulses are closely synchronized for optimum response.

Individual colors can be turned on and off by the researcher with the switches

in the right end of the control panel, they can be selected individually or usedsimultaneously if preferred. (The LED arrays can even be used without the

Pulsed magnetic field being active, if the researcher chooses to work in this

mode.Always remember to turn OFF the power to the system with the back

panel switch before connecting or disconnecting any of the coil plugs, to avoid

the need for costly repairs! [When the DIN connector is plugged in but the

green and violet coil power plugs are disconnected, only the LED arrays will

be selectable and active.]

Please refer to the research material in this book, and do a web search on

"color therapy" for further insight into the use of light and color therapy.


10/22

Briefly: greens and blues are referred to as 'cool colors', which are calming,

sedating, and pain relieving. They are also said to help shift the body into the

'para-sympathetic' mode, where the body is then more receptive to healing

influences.

The color "true orange", at 605nM, is said by some researchers to be the color

of light that the cellular chemistry of the body reacts to most dynamically;

specifically, the 'cytochrome A' or 'cytochrome oxidase' within the cells is said

to respond most dynamically to this color / wavelength of light. Light of this

color, then is observed to activate cellular processes, activate enzymes, and

stimulate circulation of the blood and lymph systems. In addition, from the

energetic approach of the accupuncture / energy healers' techniques, the

yellow-orange colors of light (590 nM to 605 nM) is said to be uiseful and

beneficial in clearing energy imbalances and blockages. When these colors of

light are pulsed at specific selected frequencies, further energetic dynamicscome into play.The reds, deep reds, and infra-reds are known as the 'warm'

colors; they are know to also stimulate and accelerate cellular processes and

facilitate healing.

This is the optionallyavailable case, which is

large enough to store and

cary this system safely.

USING A MAGNETIC FLUX CONCENTRATOR

MAGNET


11/22

OPPOSITE (SOUTH POLE MAGNETIC ENERGY) POLARITY DRAWS

AND CONCENTRATES THE PULSING MAGNETIC FLUX

THROUGH AN AREA, INCREASES DYNAMIC EFFECTS

(More will be written on this topic in the instruction and Research Material

Manual.)

I offer an optional 20+ ounce 4" diameter x .7" thick magnet for this

application for $20 plus $6 S&H ; (it's seen on the lower right edge of the case

in the photo on the right above.)

Results / responses have been reported to be enhanced- sometimes

dramatically- in research cases reports of joint issues, carpal tunnel syndrome,

and lyme arthritis conditions

USING A GROUNDING PLATE

For those researchers who might be lacking a dual coil (3D / Helmholtz) setup,

and who do not have a flux concentrating magnet, as well as for application

that might not as easily lend themselves to those approaches, the use of a

grounding plate is the other technique suggested by some researchers (such as

users of the HPMP systems) to enhance response to a pulsed magnetic signal.

A lead with a 'tip plug' on one end and an alligator clip on the other end can

be used to connect to a stainless steel grounding plate (or other shape.) Serving

trays, and even stainless steel table knives have been used in various 'zapping'applications. I offer a suitable 5' long attachment lead alone for $10, and also

offer an optional 9" x 6" stainless steel plate with a lead attached for $30 +

S&H.

SETTING THE PULSE SHAPING

CONTROL

The pulse shaping adjustment range I have designed into the MagPluseMAGNUM SP / SLP models allows for optimum driving of a variety of coil

configurations. If you want to generate a primarily North Pole Energy

magnetic output pulse, with minimal bi-phasic aspect, then the optimum

setting for the RA12 coils and the MagPulse Magnum coils presently being

released, is at the 3rd dial hash mark - two hash marks above the minimum

mark or fully counter-clockwise position. This setting is also the most efficient

as far as power consumption, producing the maximum amplitude of the North

Pole component of the radiated magnetic pulse, and also resulting in the

minimum of coil heating.

If you want more of a bi-phasic aspect to the output pulse, but with a bit less

amplitude in the North Pole energy leading edge 'spiking' component, and


12/22

more South pole energy in the output resonance, then an advanced control

setting, approaching the three o'clock position on the control will yield this.

This more advanced setting also results in higher power consumption than

when the setting is in the ~9 o'clock position. I presently prefer to use the

primarily North Pole (mono-polar) pulsed magnetic energy produced by the

lower setting for most purposes. (More will be written about this unique

pulse / waveform shaping control as further research reports are returned by

other researchers using this system.)

Body response testing approaches will be used by some collaborating

researchers to further verify which waveforms / settings are most helpful with

specific coils in specific applications. Those researchers contributing to the

research report database will in turn have access to ongoing updates as they

are made available. (One of the three specialized sensors I designed originally

to observe pulsed magnetic signals at frequencies up into the 1.5 MHz + rangeis also the one which is responsive enough to yield this type of magnetic output

waveform variation display. Other sensor designs are used to display other

aspects of interest, such as the very high speed of the rising leading edge spike

of each of the magnetic pulses.)

If you are interested in a more elaborate and sophisticated

Dual Transducer / coil System, please visit this page on

the : " MagPulse System D" systems, offered in several

variants; click here for further information.

(The next generation will be the MAGPULSE SPECTRUM System;

information will be released before too long.)

ANECDOTAL RESEARCH REPORTS

There are a compilation of some of the anecdotal research reports I've

received over the last ~10 years, accessible on this page. These reports pertain

to the use of a variety of experimental research equipment which I have

offered to other researchers over the years. While these reports do not 'prove'

anything, the do offer insight into how other researchers are achieving their

results using the various equipment. These reports also offer grounds for hope,

which is also of value.

LYME? A lady by the name of Melody was in a wheelchair with Lyme disease

(to keep from injuring herself when she would pass out abruptly and

unpredictably in February of 2005, when she received & started using the 8CE
http://www.stenulson.net/althealth/mps36.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/mps36.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/emanecdt.htm


13/22

EM+ ; by April, she was back out riding the horses with her kids... by

November of 2005, she reported being Lyme-free, and has been doing great

since. Specificly sequenced frequencies were used as she started out, which

produced great results with minimal 'herxheimer' or adverse reactions. She

would, in many cases, use two plasma tubes set up vertically in tube support

stands placed 90 degrees apart in relation to where she would sit while

running the frequency sequences. Sometimes she would also simultaneously

use the MagPulse wand on selected areas, such as neck, joints, etc. Here is a

compilation of Melody's emails & progress reports from that time period- (I

do not have permission to give out her contact information at this time). She

had hoped to expand upon these reports, adding further clarification and

additional information, but that writing has not yet been completed. Her

successful work with many other conditions in both people and animals is very

promising, so we continue to wish her well in her efforts to write more of her

insights and techniques.

ADVANCED RESEARCH ASPECTS

OSCILLOSCOPE DISPLAY OBSERVATIONS

A fast oscilloscope with an appropriate sensor is capable of graphicly

displaying the effects of the Pulse Shaping adjustment on the nature of the

output waveforms radiated from the RA12 and MagPulse Magnum coils.

Since these are such incredibly rapid changes, meters are rather misleading

and useless... an oscilloscope with the proper sensor is the only way to display

the effects on the characteristics of the radiated pulsed magnetic waveforms.

Also please keep in mind that, at all frequencies, the intense pulses that drive

the coils and set up the radiated magnetic energy field are very fast (rapid rise

and fall times), and also very brief in relation to the OFF portion of the

waveform. Simple gauss meters average measured fields over extended

measurement periods, and therefore offer very low readings compared to the

actual peak intensity of each magnetic pulse.

It is also interesting to note that three different configuration sensors can yieldthree substantially different displays of the same MagPulse coil being driven at
http://www.stenulson.net/althealth/melody.htmhttp://www.stenulson.net/althealth/melody.htm


14/22

the same frequency, depending upon how the sensor is designed.

ADVANCED ENERGETIC ASPECTS OF THE MAGPULSE MAGNUM

SERIES PULSER DEVICES

(To Be Written)

BOVIS BIO-ENERGY EVALUATIONS AND E.T.P. EVALUATIONS

(To be written)

THE LIFEFORCE ENERGY METER

(To be written)

For Pricing and Ordering Information For MagPulse Systems Research

Equipment and Accessories, please CLICK HERE

HOW TO DO SOME SIMPLE TESTING OF PULSEDMAGNETIC SIGNALS

(Information first offered on June 19th, 2002 by BKS)

Would you like an easy way to 'listen' to the output of the MagPulse Wands, to

get an idea of the shape and extent of the pulsed magnetic field emanating

from the MagPulse? Here's one simple and inexpensive (Under $20) way you

can do it, with a couple of commonly available parts from your local RadioShack store.

PART # 277-1008C Audio Amplifier / Speaker ; 3"x3"x1" compact case, (uses

a 9 volt battery )

PART # 44-533B Telephone Pickup ; plugs into the input of the Amplifier

above; picks up magnetic

signals.
http://www.stenulson.net/althealth/ordermpm.htmhttp://www.stenulson.net/althealth/ordermpm.htmhttp://www.stenulson.net/althealth/ordermpm.htmhttp://www.stenulson.net/althealth/ordermpm.htm


15/22

A 9 volt battery for the Amplifier

This simple setup will allow you to listen to the various pulse rates /

frequencies as tones when the MagPulse wand is on / pulsing. You'll be able to

observe that you can pick up and hear the signal through the body, at about

the same intensity as through the same distance of open air, demonstrating

that the body does not substantially attenuate the pulsed magnetic signal from

the MagPulse wand.

This 'transparency' of the body to pulsed magnetic signals is spoken of in

reference material provided with the MagPulse wands. The Article that's

linked below also touches on this subject. The basic significance form these

demonstrations is that there is not a loss of 'penetration'; MRI imagingtechniques rely on the pulsed magnetic signals which they produce to pass

through the body, too.

All of our cells 'hear' these pulsed magnetic signals.

The volume / intensity of the signal can easily be heard to increase as you get

closer to the MagPulse wand, and to get fainter as you get a greater distance

from it. You can optionally plug a set of headphones into the output jack on

the Audio Amplifier, to minimize outside noise.

While the audio amplifier is only labeled for a frequency response of from 100

Hz to 10,000 Hz, you can hear lower pulse rates, such as 15 Hz, very well, too.

Controlling Shape Of Magnetic Pulse

Output Waveforms On The 2007MagPulse Systems: DC36SS

In August of 2007, I designed a new high frequency, low impedance sensor

which I could use to display and evaluate pulsed magnetic waveforme at

frequencies well above 1MHz; this special sensor was used to capture the

information displayed on this page. It allow us to see the affects of using the

pulse shaping control which are not as dramaticly appearant with any sensors

used previously.


16/22

The Pulse Shaping Control on the 2007 generation of the MagPulse Systems

give the researcher the ability to select the characteristic of the MagneticResonance which they choose to use in their research applications. By

setting this control, you can vary the output waveform from a primarily

mono-polar (North Pole Energy) pulse, as shown in the upper photo at left,all the way to a more bi-phasic waveform with far more of the damped wave

'ringing' pulse waveform, as seen in the second photo above at the right.

The first two photos are of single output pulses at a lower frequency of about

200 Hz, but are exemplary of the waveforms produced at any frequency from

below 20 Hz to over 6000 Hz.

(The horizontal 'time per division' setting on this oscilloscope was left at the

same setting for all of the photos on this page, with 2 volts amplitude per

vertical division; you can see that, while the pulse intervals do change, there is

no drop-off in pulse amplitude / intensity at 6000 Hz in the lower three photos,

compared to the pulse amplitude of the low frequency pulses shown in the first

two photos.)


17/22

Above are three photos taken at ~6000 Khz, at three different pulse shaping

control settings. The left photo shows the effect of having the control set to the

fully counter-clockwise [A] position; the second photo displays how the

waveform it 'tightened up', if you will, into a cleaner mono-polar North pole

pulse at the third hash mark clockwise from the minimum position - the [C]

position. The last photo show the extent of the wavform speading into a

biphasic 'ringing' waveform when the control is set to the last three [J, K, or

L] hash marks in the fully clockwise rotation.

What this does illustrate is that if we want to generate primarily North-pole

magnetic pulses, with a minimum of the 'ringing' after each primary output

pulse, then having the ability to optimize this setting is crucial. [This optimum

setting varies with the varying inductance, impedance, and reluctance

characteristics of different coils; however, setting this control to the third

hashmark, about 9 O'clock on the dial range [C setting] will work for the

RA12 coils and for the MagPulse Magnum(c) Pulsed Magnetic & Pulsed Light

devices.


18/22

(Note that other pulsed magnetic systems such as the "Doug Machine" the

HPMP, and other "Coil Machines" do not have this ability to control the

shaping of the output waveforms.)

Notice and Warnings: This is a powerful research device; YOU are totally

responsible for deciding if, when, & how you choose to use this system!

Many researchers recommend that people with reduced Liver and / or Kidneyfunction should proceed cautiously, keeping in mind that healing and detox

reactions may be experienced. Drink a large glass of water 15 minutes before

running the MagPulse System, and drink lots of water after to help the body to

clear away any debris or toxins possibly released by micro-organisms. In

particular, people who are dealing with Lyme disease should limit their

research usage and exposure times until they have gauged their own reactions

to this research equipment.

The following is the understanding and agreement under which I make information & equipment available:

RESEARCH ASSISTANCE REQUEST &

AGREEMENT: EM+

" I, the undersigned, hereby affirm that I understand and agree that all research

assistance, information, and materials being made available to me as an

individual researcher by Bruce K. Stenulson are offered for experimental and

research purposes only. I also understand and affirm that there are no claims of

effectiveness or of suitability for any use that are either expressed or implied for

any of the experimental research devices being made available as a form of

research assistance. I accept complete responsibility for how I might choose touse the research information or experimental research devices which I request,

and I understand that research is ongoing, and that any information offered is

possibly incomplete, and may not be "Scientifically Proven" to any regulatory

agency's standards at this time, but that it is offered as research information, to

stimulate further research. I agree to personally participate in the sharing of

ongoing research information. I also understand and agree that Bruce K.

Stenulson retains all rights to any and all of his designs and techniques that he

may share in the course of any research assistance rendered, and I will not

violate those rights."


19/22

DISCLAIMER

The material presented here is offered for research, informational, and

educational purposes only. It should not be considered as medical advice, or as

a basis for diagnosis. For that, please consult with your professional healthpractitioner of choice.

NO WARRANTY OF FITNESS FOR A PARTICULAR USE IS EXPRESSED

OR IMPLIED!

These are experimental / research devices and techniques. Stimulation of detox

reactions will undoubtedly be one experience in many individuals, as

pathogens are disrupted, and the body's systems work to remove them. Refer

to Hulda Clark's book "The Cure For All Diseases", or to the web sites

referenced for further details. Also read Brian McInturff's excellent article on

DETOX & HERXHEIMER REACTIONS, included in this compilation for

your information.

This material is provided for informational purposes only, as reports of

research and experimental uses by others, and should not be considered as

medical advice. It is supplied so that you can make an informed decision.

Please consult with your health practitioner before considering any therapy or

therapy protocol. The author of the book "The Cure For All Diseases", Hulda

Clark is a Ph.D. and N.D., so I also would like to refer you once again to thatbook. Also, for further info, the published works of Dr. Robert Beck and the

books of Dr. Robert O. Becker, M.D. including "The Body Electric -

Electromagnetism and the Foundation Of Life" and "Cross Currents" are

well worth researching. James L. Oschman's book, "Energy Medicine- The

Scientific Basis" is also recommended reading.

In these days of rising health costs, combined with "Managed Health Care

Providers" who appear to be more intent upon managing to keep your money

while managing to not provide services, it is good to know that many have

effectively taken charge of some aspects of their own health care. Theinformation offered here, though by no means complete, is a start in a very

promising direction.

OUR MISSION STATEMENT

Promoting false hopes is not what this is all about - not what I wanted to do in

building the web site, not what I intend to do in sharing the things I've

discovered thus far in my personal quest for a return to better health than I've

experienced.


20/22

I am also one of the "hopeful" ones, trying to develop a better understanding

of all of the inter- relationships between all of the various possible approaches

to alternate health practices and methods. I certainly don't claim to have that

many answers yet, but there's another feeling that motivates me... a feeling

that, for many of our loved ones, friends, and acquaintances, time is running

out.....

I begin to feel that I can not afford the luxury of a conviction of certainty, at

the expense of wasted time, before sharing budding insights or newly-forming

theories, which others may be able to relate to their own experiences and

insights, and expand upon. Ideas I express should then be considered as steps

along the way, rather than final conclusions, and I warmly invite any and all

to email to me their reflections and insights in any of these matters. I'll be

continuing to add to this manuscript as new information becomes available.

The presentation won't always be polished, but the underlying principle isthis: Provide "FOOD FOR THOUGHT" to help others gain new insights, or

to apply what others have learned.

BE WELL!

ClickHERE to send Email to Bruce.

NEW 7-31-2007: THE SYSTEM 9C EM+, A RADIANT PLASMA

RESONANT FREQUENCY GENERATING RESEARCH SYSTEM:

THE SYSTEM 8CE EM+ RADIANT PLASMA RESEARCH SYSTEM

THE SYSTEM 6C EM+ RADIANT PLASMA RESEARCH SYSTEM

BENEFICIAL, NORMALIZING, AND STIMULATING FREQUENCIES

LIST- The Origional Source for these frequencies!!

ANECDOTES OF RESULTS FROM RESEARCHERS USING THE EM+

RESEARCH EQUIPMENT

RESONANT FREQUENCY DEVICE & ZAPPER USAGE ANECDOTES

LINKS TO 700+ OTHER ALTERNATE HEALTH WEB SITES
mailto:[email protected]:[email protected]://www.stenulson.net/althealth/em9c.htmhttp://www.stenulson.net/althealth/em9c.htmhttp://www.stenulson.net/althealth/em8ce.htmhttp://www.stenulson.net/althealth/em6c.htmhttp://www.stenulson.net/althealth/stimfreq.htmhttp://www.stenulson.net/althealth/stimfreq.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/zapusean.htmhttp://www.stenulson.net/althealth/ahalinks.htmmailto:[email protected]://www.stenulson.net/althealth/em9c.htmhttp://www.stenulson.net/althealth/em9c.htmhttp://www.stenulson.net/althealth/em8ce.htmhttp://www.stenulson.net/althealth/em6c.htmhttp://www.stenulson.net/althealth/stimfreq.htmhttp://www.stenulson.net/althealth/stimfreq.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/emanecdt.htmhttp://www.stenulson.net/althealth/zapusean.htmhttp://www.stenulson.net/althealth/ahalinks.htm


21/22

ZAPPERS: Effective Contact Induction Resonant Frequency Generating

Devices: THE ZAPPER LTS+, HFA-4AV & HFA4-AVR, and "ZAP-A-

PET" Models

ENVIRONMENTAL ILLNESS & MULTIPLE CHEMICAL

SENSITIVITIES

THE CURE FOR ALL DISEASES review | COLLOIDAL SILVER

"GIZMOS" | TECHNICAL DISCUSSIONS & DETAILS

OUR MISSION STATEMENT

SOURCES OF EQUIPMENT, MATERIALS, COMPONENTS, & SUPPLIES

MAKE YOUR OWN ZAPPER / COLLOIDAL SILVER GENERATOR:

COMPLETE INSTRUCTIONS

HULDA CLARK'S FREQUENCIES FOR PATHOGENS: FROM HER

BOOK

Return to the THE ALTERNATIVE HEALTH APPROACHES FORUM Main Page

DISCLAIMER: : The material presented here is sponsored and hosted by the Alternative Health

Approaches Forum, and is offered for informational and educational purposes only. It should

not be considered as medical advice, or as a basis for diagnosis ; for that, please consult with

your professional health practitioner.

The Webmaster is a member of The HTML Writer's Guild.

This web site and all of the digital photos and other original materials found here are subject to protection under

the Copyright laws; All rights are reserved by Bruce K. Stenulson, P.O. Box 69, Fairplay CO. (c)1999- 2008. Permission is granted to link to this web site or to it's individual pages, but not to
http://www.stenulson.net/althealth/zappers.htmhttp://www.stenulson.net/althealth/zappers.htmhttp://www.stenulson.net/althealth/zappers.htmhttp://www.stenulson.net/althealth/mcs1.htmhttp://www.stenulson.net/althealth/mcs1.htmhttp://www.stenulson.net/althealth/cureall.htmhttp://www.stenulson.net/althealth/csilver.htmhttp://www.stenulson.net/althealth/gizmos.htmhttp://www.stenulson.net/althealth/techdet.htmhttp://www.stenulson.net/althealth/mission.htmhttp://www.stenulson.net/althealth/sources.htmhttp://www.stenulson.net/althealth/cspulse.htmhttp://www.stenulson.net/althealth/cspulse.htmhttp://www.stenulson.net/althealth/hcfreqs.txthttp://www.stenulson.net/althealth/hcfreqs.txthttp://www.stenulson.net/althealth/index.htmhttp://www.hwg.org/http://www.stenulson.net/althealth/zappers.htmhttp://www.stenulson.net/althealth/zappers.htmhttp://www.stenulson.net/althealth/zappers.htmhttp://www.stenulson.net/althealth/mcs1.htmhttp://www.stenulson.net/althealth/mcs1.htmhttp://www.stenulson.net/althealth/cureall.htmhttp://www.stenulson.net/althealth/csilver.htmhttp://www.stenulson.net/althealth/gizmos.htmhttp://www.stenulson.net/althealth/techdet.htmhttp://www.stenulson.net/althealth/mission.htmhttp://www.stenulson.net/althealth/sources.htmhttp://www.stenulson.net/althealth/cspulse.htmhttp://www.stenulson.net/althealth/cspulse.htmhttp://www.stenulson.net/althealth/hcfreqs.txthttp://www.stenulson.net/althealth/hcfreqs.txthttp://www.stenulson.net/althealth/index.htm


22/22

reproduce any materials found here. My intention is to maintain the context within which this

material has been presented.Thanks for your understanding.

Documents

The MagPulse