2

A Ventergy Series Fan is the perfect combination of ventilation performance, energy efficiency, and application flexibility. Whether it’s whole-house IAQ ventilation, bathroom, or kitchen ventilation, every model is engineered to be the highest performing ventilator available. All models are ENERGY STAR certified, which by definition means they represent the best airflow-to-power ratio of any fan in the industry. American ALDES Ventergy Series fans are ideal for homes, apartments, and general purpose use in any climate or region.

THE FLEXIBLE SOLUTION

333

Ventergy Series Fans are the most advanced and complete range of low-energy ventilators available. Reknowned for their application flexibility and efficiency, Ventergy Series Fans are the cutting-edge choice in ventilation.

44

5

Ventergy® Series Model VS In-line Ventilator Fans are highly versatile continuous duty rated fans for residential and light commercial applications, and meet ENERGY STAR efficiency criteria for low energy consumption.

The most popular use is exhaust ventilation of bathrooms, kitchens, laundry rooms, garages, etc., with the principal advantage of eliminating the high noise levels found in traditional fans. In addition, with the increased tightness of construction for energy efficient buildings, there is a growing need of mechanical ventilation for indoor air quality. These fans are designed to serve this purpose as well, providing effective bathroom ventilation with a provision to run the fan intermittently or continuously as needed. Quiet continuous-duty energy efficient external rotor motors with permanently sealed bearings provide many years of maintenance-free performance.

ELECTRICAL AND AIRFLOW PERFORMANCE*

ModelNominal

RPM HP Volts

Watts at .2"

PsMAX.AMPS

CFM vs. Static Pressure

0" .2" .4" .6" .8" 1.0"VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -

VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40

VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48

VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

VS Series Inline ENERGY STAR Fans

• Ideal for intermittent or continuous use

• Low power consumption

• Condensation-proof IAQ lined cabinet

• Whisper quiet operation

• Energy Star Certified

• Compact Dimensions

• Ideal for zoning applications

• 100% Speed Controllable

• Easy to access motor / impeller

VS Single PortExhaust Fan

Exhaust to Roof Cap or Wall Hood

5

Ventergy® Series Model VS In-line Ventilator Fans are highly versatile continuous duty rated fans for residential and light commercial applications, and meet ENERGY STAR efficiency criteria for low energy consumption.

The most popular use is exhaust ventilation of bathrooms, kitchens, laundry rooms, garages, etc., with the principal advantage of eliminating the high noise levels found in traditional fans. In addition, with the increased tightness of construction for energy efficient buildings, there is a growing need of mechanical ventilation for indoor air quality. These fans are designed to serve this purpose as well, providing effective bathroom ventilation with a provision to run the fan intermittently or continuously as needed. Quiet continuous-duty energy efficient external rotor motors with permanently sealed bearings provide many years of maintenance-free performance.

ELECTRICAL AND AIRFLOW PERFORMANCE*

ModelNominal

RPM HP VoltsRPM HP VoltsRPM HP Volts

Watts at .2"

PsMAX.AMPS

CFM vs. Static Pressure

0" .2" .4" .6" .8" 1.0"0" .2" .4" .6" .8" 1.0"0" .2" .4" .6" .8" 1.0"0" .2" .4" .6" .8" 1.0"0" .2" .4" .6" .8" 1.0"0" .2" .4" .6" .8" 1.0"VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -VS-4 2980 0.03 120 22 0.19 101 82 62 42 18 -

VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40VS-4 MAX 3135 0.05 120 38 0.29 138 122 106 86 66 40

VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48VS-6 2200 0.06 120 41 0.34 220 180 139 105 76 48

VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153VS-6 MAX 2960 0.08 120 63 0.53 286 263 232 203 178 153*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

VS SeriesInline ENERGY STAR Fans

• Ideal for intermittent or continuous use

• Low power consumption

• Condensation-proof IAQ lined cabinet

• Whisper quiet operation

• Energy Star Certified

• Compact Dimensions

• Ideal for zoning applications

• 100% Speed Controllable

• Easy to access motor / impeller

VS Single PortExhaust Fan

Exhaust to Roof Cap or Wall Hood

5

6

MPVS 150 & 200 multiport ventilators are highly versatile continuous duty rated fans for residential and light commercial applications, and meet ENERGY STAR efficiency criteria for low energy consumption. The most popular use is as a central exhaust ventilation of bathrooms, kitchens, laundry rooms, and other locations where humidity is a controlling factor.

The principle advantage of the MPVS central exhaust system is the elimination of standard noisy bath fans, with the obvious benefits of quiet operation and reduced penetrations to the exterior of the building.

• 2 to 4 exhaust points• Ideal for intermittent use• Low power consumption • Condensation-proof IAQ lined cabinet• Whisper quiet operation• Energy Star Certified• Compact Dimensions (8” x 12” x 12”)• Ideal for Zoning Applications• Reduced exterior penetrations• Easy to access motor / impeller

MPVS Multiport Exhaust Fan

MPVS-150&200 Multiport ENERGY STAR Fans

Exhaust from multiple rooms

Exhaust to Roof Cap or Wall Hood

ELECTRICAL AND AIRFLOW PERFORMANCE*

ModelNominal

RPM HP Volts

Watts at .2"

PsMAX.AMPS

CFM vs. Static Pressure

0" .2" .4" .6" .8" 1.0"MPVS-

150 2200 0.06 120 41 .34 211 171 134 102 72 45

MPVS-200 2960 0.08 120 63 .53 276 251 224 197 171 145

*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.6

7

ELECTRICAL AND AIRFLOW PERFORMANCE

ModelNominal

RPM HP Volts

Watts at .2"

PsMAX.AMPS

CFM vs. Static Pressure*0" .2" .4" .6" .8"

MPVS-100 2980 0.03 120 22 0.19 108 88 68 48 25

MPVS-120 3135 0.05 120 38 0.29 143 128 112 95 74

*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

MPVS-100 or 120 Multiport Ventilators are highly versatile fans for continuous operation in residences and light commercial applications, and meet ENERGY STAR efficiency criteria for low energy consumption. The principle advantage for using American ALDES’ MPVS Multiport Ventilators is the assurance of controlled indoor air quality and noise reduction, with the benefit of reduced penetrations to the building’s exterior.

Today’s construction technology promotes energy efficient building techniques, which requires mechanical ventilation to ensure indoor air quality. American ALDES’ MPVS 100 and 120 multiport ventilators maximize both energy efficiency and IAQ, by continuously delivering the precise amount of fresh air. This is achieved through the use of integral automatic flow regulators, which eliminate the need for balancing dampers or fan speed controls.

MPVS MultiportExhaust Fan

• 2 to 4 exhaust points• Ideal for continuous use• Low power consumption • Condensation-proof IAQ lined cabinet• Whisper quiet operation• Energy Star Certified• Compact Dimensions (8” x 12” x 12”)• Precise airflow rates from CAR-II’s* *see page 14

• Reduced exterior penetrations• Easy to access motor / impeller

MPVS-100&120 Multiport ENERGY STAR Fans

ELECTRICAL AND AIRFLOW PERFORMANCE

Exhaust from master bathroom

Exhaust from bathroom

Exhaust from Laundry or Kitchen

Exhaust to Roof Cap or Wall Hood

Fresh Airfrom Airlets®

7

8

The Ventergy Series BVS Blending-Filtering Ventilator is designed to provide fresh outdoor air, blended for tempering with indoor air drawn from bedrooms or areas not served by a central thermostat, before filtering and distributing this air to main living areas of the home. This maximizes total air changes effectiveness and improves air distribution, particularly in homes without central forced air heating systems. The BVS filters both indoor and incoming fresh air, and helps prevent the introduction of contaminants as a result of unwanted infiltration through leaks in the building’s envelope.

By slightly pressurizing the structure, the BVS also reduces risk of back-drafting heating appliances, water heaters, and fireplaces. Quiet continuous-duty energy efficient external rotor motors with permanently sealed bearings provide many years of maintenance-free performance.

• Ideal for continuous use

• Low power consumption

• Condensation-proof IAQ lined cabinet

• Whisper quiet operation

• Energy Star Certified

• Compact Dimensions (8” x 12” x 26.5”)

• Precise airflow rates from CAR-II’s* *see page 14

• 100% Speed Controllable

• Easy to access filter / motor / impeller

BVS-120&200 Blending/Filtering ENERGY STAR Fans

ELECTRICAL AND AIRFLOW PERFORMANCE*

ModelNominal

RPM HPWatts at .2" Ps

CFM vs. Static Pressure

0" .2" .4" .6" .8"BVS-120 2146 0.06 43 186 152 122 94 67BVS-200 2960 0.08 66 261 236 210 186 162

*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

MERV 9 disposable pleated or permanent

electrostatic filter options

Heavy gauge G90 galvanized steel

construction

Internally insulated with acoustic vapor

barrier insulation

High efficiency motor meets ENERGY STAR performance criteria

Drop down hinged motor and filter access panels for easy service

Integral Automatic Airflow Controls

9

Filtered/Tempered Air Returning to Living Space.

Return Air from Bedroom

Return Air from Bedroom

Fresh Airfrom Outdoors

Fresh air is automatically regulated and balanced

9

10

The Ventergy® Series Distributed Supply Air Ventilator is a highly versatile continuous duty unit for residential applications, and meets ENERGY STAR efficiency criteria for low energy consumption, it is designed to provide precise amounts of fresh outdoor air to bedrooms and/or living areas.

The Ventergy® Series Distributed Supply Air Ventilator is designed to filter and distribute incoming fresh air precisely to several rooms, and prevent the introduction of contaminants as a result of unwanted infiltration through leaks in the building envelope, by slightly pressurizing the structure. In addition, it reduces the risk of back-draft for heating appliances such as water heaters and fireplaces. The unit uses a quiet, continuous duty, energy efficient external rotor motor with permanently sealed bearings that provide many years of maintenance free performance.

• Ideal for continuous use• Low power consumption • Condensation-proof IAQ lined cabinet• Whisper quiet operation• Energy Star Certified• Compact Dimensions (8” x 8” x 21”)• Precise airflow rates from CAR-II’s**see page 14

• 100% Speed Controllable• Easy to access filter / motor / impeller• Multiple Filter Options

DSVS-100 Multiport Filtering ENERGY STAR Fans

Heavy gauge G90 galvanized steel

constructionInternally insulated with acoustic vapor

barrier insulation

High efficiency motor meets ENERGY STAR performance criteria

Drop down hinged motor and filter access panels for easy service

3” Flexible Duct Connectors

MERV 8 pleated disposable, electrostatic, and MERV

9 washable charcoal permanent filter options

ELECTRICAL AND AIRFLOW PERFORMANCE

ModelNominal

RPM HP VoltsWatts at .2" Ps

MAX.AMPS

CFM vs. Static Pressure*

0" .2" .4" .6" .8"DSVS-100 3135 0.05 120 37 0.32 130 110 95 74 50

*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

Integral AutomaticAirflow Control

11

The DSVS provides precisely regulated, filtered, fresh air wherever needed as well as creating slight positive air pressure in the dwelling.

11

12

ELECTRICAL AND AIRFLOW PERFORMANCE

ModelNominal

RPM HP VoltsWatts at .2" Ps

MAX.AMPS

CFM vs. Static Pressure*

0" .2" .4" .6" .8"

FSVS-100 3135 0.05 120 37 0.32 125 110 98 81 61*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

The Ventergy® Series Filtering Supply Air Ventilator is a highly versatile continuous duty rated unit for residential applications, and meet ENERGY STAR efficiency criteria for low energy consumption. It is designed to provide precise amounts of fresh outdoor air to the occupied space or AHU return air plenum and will filter and distribute incoming fresh air, and prevent the introduction of contaminants as a result of unwanted infiltration through leaks in the building’s envelope. By slightly pressurizing the structure, the unit also reduces the risk of back-drafting heating appliances, water heaters and fireplaces. The quiet, continuous duty, energy efficient external rotor motor with permanently sealed bearings, provides many years of maintenance free performance.

• Ideal for continuous use• Low power consumption • Condensation-proof IAQ lined cabinet• Whisper quiet operation• Energy Star Certified• Compact Dimensions (8” x 8” x 21”)• Permanently Lubricated Bearings• 100% Speed Controllable• Easy to access filter / motor / impeller• Versatile Control Options

FSVS-100 Single Port Filtering ENERGY STAR Fans

Internally insulated with acoustic vapor

barrier insulation

MERV 9 permanent washable charcoal or

electrostatic filter options

Heavy gauge G90 galvanized steel

construction

4” pre-filtered fresh air duct connectorHigh efficiency motor

meets ENERGY STAR performance criteria

Drop down hinged motor and filter access panels for easy service

12

13

In warm climates, the FSVS

should be installed separately

from the forced A/C system to

prevent moisture in the air from

condensing inside cold ducts.

In this example, it is installed so that its fresh air is introduced into the large living area via the overhead return.

FSVS Interlocked with Forced Air Unit

13

14

HOW DO OUR VS FANS REGULATE AIRFLOW?One of the most unique features of the VS Series Fan is their ability to automatically balance and regulate the amount of outdoor and return air required for each installation. This is accomplished by the integral Constant Airflow Regulators (CAR’s and CAR-II’s) located at each duct takeoff.

Each CAR includes a modulating damper that responds to variable pressure conditions caused by the fan’s operating speed, length of attached duct, and wind, to control precise airflow rates at all times. This eliminates the need for on-site airflow balancing and fan speed adjustments, and provides the VS Line with a plug-and-play feature not found in other multiple ducted fan systems.

Duct static pressure variations occur as a

result of wind, stack effect, zone damp-

ers, fan speed and varying duct lengths.

CAR-II’s automatically respond to these

variables assuring accurate delivery of the

prescribed airflow rate

At Low Static Pressure the

aero-wing is parallel to the

duct airstream, allowing

maximum free area

As Static Pressure increases, the aero-

wing lifts to restrict the duct free area,

which results in constant airflow.

14

1515