1

• Tyre tread measurement in seconds• Measurements starts as the vehicle drive over• Precision & long life thanks to advanced 3D camera technology• Flash Cam: automatic licence plate recognition

THE

FLASH TREADREVOLUTION

2

86%of accidentsare precededby a braking1 41 %

of vehicles havea tYre worn

problem2

40 %of road traffic

accidents caused by vehicle defects

are tyre related3

25%of tyre related accidentsoccur because the tyre’s

tread depth is belowthe minimum

level4

THE TYRE IS THE ONLY POINT OF CONTACT BETWEEN THE VEHICLE AND THE ROAD.

Think about it!

1 Source: Federpneus (Italian Tyre Distributors Association), 2013.2 Source: TNO Report, 2014R11423-V2, December 2016, Technical Sciences, NL-5700 AT Helmond, share in % for summer tyres in February 2014, projected to the vehicle population in the Netherland.3 Source: Department for transport (DfT, UK), 20144 Source: TNO report, 2014R11423-V2, December 2016, Technical Sciences NL-5700 AT Helmond

3

30

80KM/H 55KM/H

11%

90

Data refer to a vehicle driving at 100 Km/h on a wet road.

RISK THRESHOLD

METRES

NONE

GOOD WORNVsT Y R E T Y R E

60%

METRES

RISK THRESHOLD

FINESPER TYRES

FOR ILLEGALTREADDEPTH

BrakingDistance

Grip

AQUAPLANING

Lawenforcement

3

4

SAFETY GOES ALONG WITH BUSINESS

COLOR CODED LIGHT PROJECTION:• No mechanical parts as with laser technology• No sensitivity against dust, vibration and moisture• Robust against temperature deviations• Less influence of stow and humidity

MEASURING TYRE DEPTH ISIMPORTANT• It determines how safely the vehicle can accelerate and brake• Inspections by law are increasing in order to drive down accidents and casualties• For a workshop, it’s a fundamental indicator and an opportunity to grow its business

WITH FLASH TREAD,IT TAKES YOU 5 SECONDS• It measures the 4 tyres conditions as the vehicle passes over the measuring strip• Measuring results are displayed in 5 seconds• Easy introduction into the operator overall vehicle check

4

5

MAIN FEATURES

ROBUST CAMERA TECHNOLOGY• Low profile, no moving parts• No sensitivity against: - Light exposure - Dust or small objects on the protection side - Vibration - Moisture and temperature• No need to install any software or app• No need to have an internet connection• No need for any subscription to get the results

5

6

• User friendly• Color-coded results, printable quickly on a A4 printer• Save measurements as data sets and view them anywhere, anytime• Thanks to Connected Workshop integration you can save measurements as data sets

SMART SOFTWARE

PC

SMART-TV

TABLET

4 DISPLAY POSSIBILITIESFOR MAX FLEXIBILITY

PHO

NE

TOUGH DESIGN• Withstand more than 150,000 vehicle passages• Axle loads up to 4 tons• Low profile for vehicles with performance suspensions• Up to 21 visualization systems can be conneted

6

7

john

7

8

EXTENDED TYRE ANALYSIS

8

9

3 regional tread dephts (left/middle/right)are displayed; The smallest value is emphasized.

Regional tread depths are symbolized by color coded baregraphs; Color thresholds (Red> yellow> Green) are adjustable.

General tyre evaluation.

Breaking distance*(vehicle compaired to ideal case with new tyres)

Overall evaluation of vehicle(green-yellow-red)

Typical fault leading to typical wear patterns(invariable display)

If at least one tyre is worn out, the message “Replace tyres“ will be triggered.

If examination of all four wear pattern reveal a possible wheel alignment issue, then the message “check wheel alignment“ will be displayed.

*Source: Continental

Should the global tyre analysis reveal a typical wear pattern, then the corresponding symbol will be displayed.

Tyre must be replaced

Tyre is nearly worn out and/or is unevenly worn

Tyre is OK

3.9 4.1 3.5

Tyre pressuremay be too high

May indicate a tyre pressure too

low

May point a possible wheel alignment issue

If at least one wear pattern reveals a possible long term incorrect air pressure, the message “check the tyres pressure“ is displayed.

9

10

Technical data Low profile ramp variant Floor mounted variant

Dimensions in mm (H x W x D) 85 x 2,245 x 1,030 (3.3” x 88.4” x 40.6”) 85 x 2,330 x 560 (3.3” x 91.7” x 22.1”)

Max. tyre width 450 mm (17.7”)

Track 1,080 – 1,820 mm (42.51” – 71.6”)

Max. speed 8 km/h (5 mph)

Mains supply 100 to 230 VAC 50 – 60 Hz, 1-phase

Max. axle load 4 t

Operating temperature range 0 – 40 °C (32 – 104°F)

Protection level ofmeasuring modules IP65

Software languages 18

THREE VARIANTS TO FIT YOUR WORKSHOP

On ground variant for installation on both sides of a pit

FLASH TREAD TECHNICAL DATA:ADAPTABLE TO ANY WORKSHOP

1

1

2

2

3

3

Both suitable indoor or outdoor (roof only) Both suitable indoor or outdoor (roof only)

On ground variant, very quickto install

In ground variant, in case of limited space

10

11

O U R E Y E------------ - O N

Y O U R S A F E T

Y -

----

----

----

is the accessory that gives Flash Treadthe gift of sight.

FLASH CAM

11

12

FLASH CAMINSTANT NUMBER PLATE ACQUISITION

A technologically-advanced camera which, by reading the registration plate of the incoming vehicle, speeds up the whole inspection process.Thanks to the specifically designed software, Flash Cam greatly simplifies reception operations: it allows the operator to identify the vehicle and its vital information, instantly recording the test results.

WHAT DOES IT DO?• It performs automatic registration plate recognition• The display shows the registration plate complete with results• The database matches the vehicle to results

12

13

• Extremely easy to install• No particular set-up required• IR Camera (3 fps)• Universal installation for front or rear plates• Wide viewing angle even reads off-centre registration plates• Drive-over • Also as in-ground installation• Robust steel housing

• Anticorrosive cathodic dip-coating• Hermetically sealed for protection from dust and humidity (IP65 Standard)

OTHER BENEFITS:

FULLY AUTOMATIC WITH AUTO-TIMER

EASY SET UP WITHOUT CALIBRATION

PLUG AND PLAY

FLASH CAMMAIN FEATURES

WORKSHOPRECEPTION

SI 975 CM

2FS B259

SI 975 CM

IDENTIFIED PLATE

OB 567 ys

SI 975 CM

2FS B259

SI 975 CM

IDENTIFIED PLATE

OB 567 ys

INTELLIGENT ANALYSIS WITH COUNTRY IDENTIFICATION

13

14

FLASH TREADSCOPE OF DELIVERY

Description Scope of delivery Order number

Low profile ramps variantfor standard installation on ground

Ramps (4 pieces)Measuring units (2 pieces)Power cable: 10 mPower BoxData line cables: 2,5 m + 10 mScraper (1 pieces)Dehumidifying agent (2 pieces)

1 691 200 012

Low profile ramps variantfor inspection pit on ground

Ramps (4 pieces)Measuring units (2 pieces)Power cable: 10 mPower BoxSwitch (1 piece)Data line cables: 2x10 mScraper (1 pieces)Dehumidifying agent (2 pieces)

1 691 200 013

In ground variantfor standard installation

Measuring units (2 pieces)Power cable: 10 mPower BoxSwitch (1 piece)Data line cables: 2,5 m + 10 mScraper (1 piece)Dehumidifying agent (2 pieces)

1 691 200 014

Product Order number

Threaded Sleeve for tar floors(8 pcs) 1 691 201 016

Scraper 1 693 740 218

Shear Connector (8 pcs) 1 691 201 017

Calibration kit (for ISO 9001) 1 691 205 010

Cable guard extension(approx. 0,7 m / 2.3 Feet) 1 691 202 039

14

15

OPTIONAL ACCESSORIES:

ANPR Camera Sicam above ground ANPR Camera Sicam recessed Cable tunnel (option for ANPR Camera above ground).Please use 2x parts

Built-in frame for Recessed installation

Center cover Trolley Sicam with PC, display, mouse

Dehumidifying agent (2 pieces)

PN: 1 691 200 015

PN: 1 691 200 010

PN: 1 691 200 016

PN: 1 691 202 069

PN: 1 691 201 005

PN: 1 691 201 023

PN: 1 691 201 039

15

16

Sicam S.r.l. Società UnipersonaleVia G. Corradini | 42015 Correggio RE ItalyTel. +39 0522 643-311 | Fax +39 0522 637-760E-mail: sales@sicam.it | www.sicam.itThe right to make changes of a technical nature and to alter the range on offers is reserved. | 05/2019