Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
To,
Date :
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.560 001
BOQ OF THE INTERIOR FURNISHING WORK FOR BANK OF BARODA AT CHIKKABALLAPUR BRANCH
SI
NO
DESCERIPTION OF WORK QTY UNITS RATE AMOUNT
PARTITION
1.0 Fully Glazed Partition : -
Entrance Fully glazed partition and manager cabin
partition (north side) and door of size 3'0"x7'0",
main entrance door of size 3'6"x7'0" using 3"x21/2"
teak wood frame fixed with 12mm thick glass with
alround frames mounted. on heavy duty floor
spring (Everite / Hardwyn). 4"x3" wooden frames
alround side with melamine polish finish. The glass to
be fixed with 3/4" designed Teak wood beadings. All
exposed wooden partition to be in melamine polish
finish.Handles should be of size 12" in SS satin finish
approv ed by Architect.
85.00 Sft
2.0 Partly Glazed Partition : -
Partly glazed partition manager cabin (west side)
partitionto be done using Jindal aluminium
rectangular sections of 63.5mmx38.1mm Aluminium
frame 1.70 mm thickness fixed with 6mm plywood
on both sides finished with 1mm laminate sheet
(approved colour) for bottom 3'0" and upto ceiling
and middle portion with 8mm glass withetching
design/ bank logo for 4'0" ht. fixed with teak/beach
wood beading work and all the exposed wood
portion inmelamine polish finish.Doors to be provided
in the same manner with glass and SS handles 12"
height, locks, stopper, door closures to be provided.
150.00 Sft
3.0 Non Glazed Partition : -
Supplying and fixing of non glazed partition for
UPS,Dining, Entrance side,Records room & above
fully glazed partitions upto ceiling height & Strong
room @ 8' ht to be done using Jindal aluminium
rectangular sections of 63.5mmx38.1mm Aluminium
frame 1.70 mm thickness fixed with 6mm
plywood on both sides and 1mm laminated sheet
(approved colour) without glass.Doors to be
provided in the same manner with glass and
handles, locks stopper, door closures
to be provided.
290.00 Sft
4.0 Semi Partition : -
Semi partitions to be done at 4'0" ht,to be done using
Jindal aluminium rectangular sections of
63.5mmx38.1mm Aluminium frame 1.7 mm thickness
fixed with 6 mm plywood and both side 1mm
laminated sheet (approved
colour) for upto 3'0" ht and then balance 1'0" ht with
12 mm glass.
0.00 Sft
5.0 Wicket Gate: Size 4'-0" x 2'-6"
Wicket gate double door made of 2"x2" wooden
frame covered with 6mm plywood on both sides
finished with same lamination,edges are finished with
teak wood / beechwood beadings neatly polished.
1.00 Nos
FURNITURE & WOOD WORKS:-
6.0
Writing ledge: :Size : 5'0"x1'6"x3'6" ht
Writing desk to be done as per plan with 12mm
glass topped with 18mm plywood structure with
boxing as per
design by Architect, finished with 1mm laminate (
BOB ORANGE) outside and inside. Suggestion /
complaint box and cheque drop box with view glass
and locking provision in same manner to be
provided along with the writing desk.
1.00 Nos
7.0
Notice Board :Size : 5'0"x3'6" - (1 no) Fabrication and
fixing of notice board made of teak wood /beech
wood frame work alround filled with soft board and
covered with fur matching (BOB Orange). The outer
frame of the notice board is to be finished with
melamine polish.
1.00 Nos
8.0
Sub Staff Table:
Providing working top for sub staff using 18mm
plywood with lamination finished & fixed with Ebco
bracket supported on wall. Size: 3'3"x1'9" @ ht 2'6"
2.00 Nos
9.0
File cabinet :
Half Ht Size: 10'9"x1'6"x2'6" - 1no, Full ht 5'3"x1'6"x7'0" -
1no.
Providing and fixing 1'6" wide storage unit made of
18mm marine plywood finished with1mm lamination
of approved colour & pattern on top and all visible
sides with shelves inside laminated with 0.8mm
laminate. All exposed edges are finished with
hardwood lipping. Provided openable shutters with
SS handles, lock and auto closing hinges as per
design.
385.00 Sft
10.0
Dining Counter:
Size: 9'3"x1'9"x2'6" Supplying and fixing of pantry table
using 18mm plywood with proper support and
finished with matching lamination sheet, provided
for keeping bags and tiffin carriers.
0.00 Nos
11.0
Rolling Shutter Box:
Supplying & fixing of rolling shutter box using 18mm
thk, plywood with adequate support at the ends
and finished with lamination of approved make and
colour etc., complete.(If required)
65.00 Sft
12.0
OTHER WORKS :
Vertical Blinds: 100 mm wide Vertical Blinds of vista
levelor/Mac having top rail 39 mm x 34 mm (1.2 mm
thick ). The louver fabric shall be of polyster
viscose/polyster/ yarn as per approval. (colour-
need prior approval from Architect)
100.00 Sft
13.0
FALSE CEILING : -
False Ceiling with Gypsum Board:
Supply and erection of gypboard false ceiling for
Banking Hall& Manager Cabin as per design with
recessed ceiling in centre for manager cabin alone,
with framework of G.I. Section of spacing 4'0" x 2'0"
above with 12mm gypboard fixing. Rate is included
for cutouts for lights, smoke detectors and AC grills.
The ceiling is putty finished and sanded to form
clean and homogeneous surface. Rate is included
for two coats of acrylic emulsion painting.
1000.00 Sft
14.0
Step False Ceiling
4" verticals covered using 6mm plywood with
laminate finish (BOB ORANGE)
100.00 Rft
15.0
Grid Ceiling
Providing and fixing suspended false ceiling
consisting of Armstrong/ Decophone or equivalent
make 600mm x 600mm tiles suspended
on GI framework as per manufacturer specification
and as approved by Architects/ BOB. Rate quoted
to include cost of providing support
framework formed of perimeter channels for fixing
light fixtures, AC grills/diffusers etc. Also to provide
concealed perimeter channel
support as required to support modular grid ceiling
sections at junction between gypboard false ceiling
and modular grid tile ceiling.
Providing and fixing 50 mm Metal Axiom on periphry
of Modular ceiling as per the design and details of
the Architects.
150.00 Sft.
16.0
Cornice
Cornice as per Architects approval using imported
ready made design cornice to be fixed alround on
false ceiling inclusive of painting.
200.00 Rft
Wall Paneling: -
Wall panelling 4'0" height with 11/2"x1" hard wood
fixed to the walls and then covered with 6 mm
plywood and to be laminated with 1mm thk.laminate
of approved make and colour wooden cornice of
size 3"x2" has to be fixed on the top edge of wall
paneling as per design duly melamine polished of
approved colour etc.
17.0
80.00 Sft
TOTAL FURNISHING AMOUNT
To,
Date :
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
BOQ FOR THE ELECTRICAL WORKS OF BANK OF BARODA AT CHIKKABALLAPUR BRANCH
SI NO
DESCERIPTION OF WORK QTY UNITS RATE AMOUNT
1.0 Main Electrical Panel Board (Factory made)
Supply, fabrication, erection, testing & commissioning of 1.00 Set
cubical type panel.
( Make:MDS/Hager/CRABTREE)
1 No.100A, 4 pole MCCB INCOMER
1 set TPN AL bus bar suitably rated
1 set 0-500 V voltmeter with selector switch & control fuses
1 set 0-100 A ammeter
1 set RYB phase indicating lamps with control fuses
OUTGOINGS
32 A 4 P MCB - 3 Nos
63 A 4 P MCB - 3 nos
B LIGHTING DB
Supply, Installation & Commisioing of the following
Three Phase,Phase segrigated Distribution board with
nuetral bar, earth bar, cables ties,top and bottom
removable gland plate and with
necessary adopter boxes if any. The DB should be
IP 42 metallic double door with provisioin of MCB &
ELCB etc as required including cuting of wall and
plastering the same with neat finish.It comprising as
follows:-
( Make:MDS/Hager/CRABTREE)
Incomer : 63A 4P MCB (DCMJCFPF063)
Outgoing: DCMJCSPF - 10/6A SP MCBs - 10 Nos
2.0 POWER DB
Three Phase, MCCB provision Distribution board with
neutral bar,earth bar,cables ties,top and bottom
removable gland plate and with necessary adopter
boxes if any.The DB should be IP 42 metallic double
door with provisioin of MCCB etc as
required including cuting of wall and plastering the
same with neat finish.It comprising as follows: -
( Make:MDS/Hager/CRABTREE)
Incomer : 63A TPN & Vertical MCCB
(DCDKTHDDCW04)
DCMJCFPF040 - 40A 4P MCCB - 1No
Outgoing: DCMJCSPF - 32A/25/20A SP MCBs - 10 Nos
1.00 Set
3.0 AC DB
Three Phase, MCCB provision Distribution board with
neutral bar,earth bar,cables ties,top and bottom
removable gland plate and with necessary adopter
boxes if any.The DB should be IP 42 metallic double
door with provisioin of MCCB etc as required
including cuting of wall and plastering the same with
neat It finish.comprising as follows: -
(Make:MDS/Hager/CRABTREE)
Incomer : 63A TPN &VerticalMCB (DCDKTHDDCW04)
40A 4 MCB - (DCMJCFPF040 )
Outgoings:
DCMJCSPF - 32/40 A SP MCB 6Nos
1.00 Set
4.0 CDB(12WAY SPN DB)
12 Way SPN Distribution board with nuetral bar,earth bar, 2.00 Set
cables ties,top and bottom removable gland plate and with
necessary adopter boxes if any. The DB should be IP 42 metallic
double door with provisioin of MCB&ELCB etc as required
including cuting of wall and plastering the same with ne at
finish.It comprising as
( Make:MDS/Hager/CRABTREE)
Incomer : 12Way SPN DB (DCDKTHDDCW12)
DCMJCFPF032 - 32 A DP - 1 No
Outgoing:
DCMJCSPF - 10/16A SP MCBs - 10Nos
5.0 Supply & Installation of 32A Metal Clad Socket with top in a
5.00 Set
specified company manufactured box with suitable rating MCB for
connecting A/C Split point & Strong room socket
6.0 Supply and fixing of 63A Rotter Switch for UPS input 2.00 Set
7.0 63A 4P Lever type Change Over Switch in Manual 1.00 Set
operation capable of making carrying and breaking courrents
under normal ( HCL/ Havells/GEM)
8.0 Supply & Installation of 32A Metal Clad Socket with top in a
2.00 Set
specified company manufactured box with suitable rating DP MCB
breaker type for connecting UPS point & Strong room
socket
C LT CABLES
Supply & Laying of the following cables in built up trenches,on
wall, or in the ground as per the case may be,with proper clamping
with necessary fixing materials etc.Installing testing & commisioing
of 1100V grade UG cable as per IS 7098/1554
( Finolex/Universal)
1.0 3.5Corex70Sqmm Aluminium Armored cable 35.00 Mtr
2.0 4C x10Sqmm Copper Armoured Cable (UPS to ATM Power DB)
45.00 Mtr
3.0 4C x6Sqmm Copper Armoured Cable (VDB Panel to Power DB,
Lighting DB & Computer DB) 65.00 Mtr
End Termination of the above cables with proper Glands and Lugs
1.0 3.5Corex70Sqmm Aluminium Armored cable 4.00 Set
2.0 4C x10Sqmm Copper Armoured Cable 2.00 Set
3.0 4C x6Sqmm Copper Armoured Cable 6.00 Set
D WIRING
1.0 Light/Fan point wiring with 3 of 1.5 sqmm Finolex PVC insulated
copper conductor to be laid in 2mm suitable PVC conduit with
Bend,Couplings, etc.. And fixing with PVC clamps screws etc.All
conduits to be laid above theconduit with Bend,Couplings, etc..
And fixing with false ceiling/partition/concealed in the wall 6A
Modular type etc. plate and metal Box Wiring to be connected
with supply & fixing of switch (MK/ROMA/ CRABTREE) with
suitable Modular switches.
a) One light Controlled by One Switch 25.00 Pts
b) Two Lights Controlled by one Switch 10.00 Pts
c) 6A Switch box Sockets in the switch board itself 10.00 Pts
(combined position only)
d) 6A Switch box Sockets for wall fan point 8.00 Pts
e) Exhaust Fan points 1.00 Pts
f) Ceiling fan point with regulator 6.00 Pts
2.0 Supply & Wiring with Flame Retardant Insulated PVC copper wire
as per grade IS 994 for Circuits,Computer point,Power
points
within 2mm thk PVc conduits with necessary accessories and
with proper clamps and to be concealed below the false ceiling
It comprises as follows: -
a) 3Runs of 2.5Sqmm copper wire in PVC conduit for circuit
mains
240.00 Mtr
(Circuit mains LDB to All switch boards)
b) 3Runs of 2.5Sqmm copper wire in PVC conduit for Power
points
280.00 Mtr
(Power wiring for two table in one circuit)
c) 3Runs of 2.5Sqmm copper wire in PVC conduit for
computer points
310.00 Mtr
(UPS wiring for alternate UPS 1 & 2)
d) 4Runs of 6Sqmm copper wire+2.5Sqmm copper wire in
PVC
90.00 Mtr
conduit for (Split AC wiring)
e) 4Runs of 6Sqmm copper wire+2.5Sqmm copper wire in
PVC
25.00 Mtr
conduit ( UpS input/output)
f) 3Runs of 2.5Sqmm copper wire in UPS wiring for lights in 90.00 Mtr
Manager Cabin & Banking hall
E POWER POINT OUTLETS
1.0 Supply & Installation of 3 Nos of 6A Sockets controlled by 1No
14.00 Set
Switches with front plate with enclosure and other accessories etc..
(MK /ROMA/CRABTREE)
2.0 Supply & Installation of 1Nos of 6A Socket controlled by 1No 6A
8.00 Set
Switch with front plate with enclosure and other accessories etc..
(MK /ROMA/CRABTREE)
3.0 Supply & Installation of 1Nos of 6A Socket controlled by 1No 16A
6.00 Set
Switch with front plate with enclosure and other accessories etc..
(MK/ROMA/CRABTREE)
F LIGHTING FIXTURES
1.0 Supply, Fixing & Commisioning of Recess mounting type 15.00 Set
compact vertical Flat Panel 34W LED fitting in Down Rods with
white finish and other fixing accessories.,
2.0 Supply, Fixing & Commisioning of Recess mounting type 10.00 Set
compact vertical round shaped 1x15W LED downlighter fitting with
white finish and other fixing accessories.,
3.0 Supply & fixing of 22Watts LED tube light fiitings 12.00 Set
(Crompton / Havells)
4.0 Supply & Fixing of exhaust fan (Crompton / Havells) 1.00 Set
5.0 Supply & Fixing of Wall mounting Fan (Crompton / Havells)
8.00 Set
6.0 Supply & fixing of Orange/warm colour LED FLEXI Strip
Light
fittings in the stepped false ceiling area including the cost
of wiring etc., complete. 30.00 Mtr
7.0 Supply & fixing 7W LED bulb fitting including lamps. 3.00 Nos
8.0 Supply, Fixing & Commisioning of 48" ceiling fan with
necessary Down Rods andfan hook with all fixing
accessories., (Crompton / Havells) 6.00 Set
G EARTHING
1.0 Providing dedicated earthing with 600x600x3.15 mm copper plate
along with 50mm dia.10feet long G.I pipe with other accessories
in the earth filled with salt,charcoal,etc. It should be covered with
G.I Manhole cover with necessary civil works.etc.. 1.00 Set
2.0 Supplying of all materials and providing earth point, with
pipe earthling waste pipe earthling strips funnel etc. excavation
trenches, filling with alternate layers of charcoal, salt ands sand,
back filling as per BIS specifications and IS 3043/1987 2.00 Set
3.0 Supply & Laying of 10 Sqmm PVC Insulated Multi strand copper
conductor laid in 25mm dia PVC pipe for Dedicated earth leads
from the earth electrodes to the UPS system 30.00 Mtr
4.0 Supply & Laying of 8 SWG copper wire 40.00 Mtr
H TELECOMMUNICATION CABLING
1.0 Supply & Laying of 2 pair telephone cable in the 2mm Thk suitable
PVC conduit for all telephone points(delton) 160.00 Mtr
2.0 Supply & Fixing of RJ 11 Telephone Sockets 8.00 Set
3.0 Supply & Installation of 10Pair KRONE Box with Enclosure 1.00 Set
I DATA CABLING
1.0 Supplying & Fixing of D -Link CAT 6 10/100/1000 Mbps UTP Cable
including the cost of laying the cable etc.complete 320.00 Mtr
2.0 Supplying & Fixing of D -Link CAT 6 single information
outlet including the cost of punching & fixing etc., including ATM
12.00 Nos
3.0 Supplying & Fixing of D -Link 24 Port 10/100 Mbps Fast Ethernet
Switch 1.00 Nos
4.0 Supplying & Fixing of D -Link CAT 6 24 port patch panel including
punching & fixing etc., complete 1.00 Nos
5.0 Supplying & Fixing of D -Link CAT 6 3 Feet Patch cord 12.00 Nos
6.0 Supplying & Fixing of D -Link CAT 6 7 Feet Patch cord 12.00 Nos
7.0 Supplying & Fixing of 9 U RACK 1.00 Nos
TOTAL ELECTRICAL AMOUNT FOR BRANCH
To, Date :
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
BOQ FOR THE AIRCONDITIONING WORK OF BANK OF BARODA AT CHIKKABALLAPUR BRANCH
SI NO
DESCERIPTION OF WORK QTY
UNITS RATE
AMOUNT
SPLIT AIR CONDITIONER
3.0 Installation Charge for Split AC 6.00 Nos
4.0 Supply & Fixing of 4/ 5 K va Voltage Stabilizer 6.00 Nos
5.0 Out door unit stand 6.00 Set
6.0 Supply & Laying of PVC drain pipe 30.00 Mtr
7.0 Supply & Laying of Copper pipe 40.00 Mtr
8.0 Civil works like cutting AC hole,packing,drain pipe cutting and
packing with mortar etc. 1.00 Ls
TOTAL AIR-CONDITIONING AMOUNT
To, Date :
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
BOQ FOR INTERIOR WORK IN BANK OF BARODA, MINI LOBBY AT CHIKKABALLAPUR BRANCH
SI NO DESCERIPTION OF WORK QTY UNITS RATE AMOUNT
PARTITION:-
1.0 Fully Glazed Partition :
Providing fully glazed partitions with patch fittings @8'6" ht. and door
size : 3'6"x7'0", using 12mm thk toughend glass for the Entrance by
supporting the glass by 3" thk partition from the true celling covered
by 8mm thk ply on both sides and finished with 1mm thk
lamination of approved colour upto a height of 1'0" only below the
false ceiling level.(above the false ceiling level measurement taken
as non glazed partition) Though the partiton frame work is supported
from the true ceiling measurement will be taken on ly below false
ceiling.The partiton glass will be supported by aluminium channel
10mm width which is fixed on the floor by cutting the floor. The
glass will be tightened by providing rubber gaskets on both sides.
The entire work to be done to the design & satisfication of the
Architect.The glass to be fitted with DORMA SS patch fittings
and the rates to be quoted inclusive of all the fittings and other
accessories.Door to be provided with SS handle ( satin fiernish)
of 12" length as per Architect's approval. 50.00 Sft
2.0 Non Glazed Partition:
Supplying and fixing of non glazed partition for E- Lobby
entrance & ups partition upto ceiling height to be done
using Jindal
aluminium rectangular sections of 63.5mmx38.1mm Aluminium
frame 1.70 mm thickness fixed with 6mm plywood on both sides
and 1mm laminated sheet (approved colour) without glass. Doors to
be provided in the same manner without glass and handles, locks,
stopper, door closures to be provided. 195.00 Sft
3.0 Solid Partition:
Providng and fixing of full ht solid partition made out of salwood frame
centre to centre section size 2"x 2" both ways rigidely fixed/covered
with wooden plug/raw plug with 9 mm thk comm. ply and MS Grill (
4"x4" c/c of 8 mm squre bar duly painted with enamel pait and metal
based perimer) sandwitchted between wooden frame and 9mm thk.
ply to strengten partition, finished with one side with 1 mm thick
laminate and other side with 6mm thick extra clear white back
painted glass in plumb line and level, fixed with groove, finished the
joints/grooves with matching colour silicon. M.S. grill shall be
fixed/grouted firmely at ground and ceiling at every 2' interval with
heavy duty hold fast or as directed by bank.rate shall be of inclusive
of P/f of silver metal coated laminates skirting of 75mm high &
groove at skirting level. Basic Rates of extra clear white
back painted glass is Rs. 175/- per sq.ft. 0.00 Sft
3.0 FALSE CEILING
GYPSUM BOARD:
Supply and erection of gypboard false ceiling for E-LOBBY as per
design with suspended ceiling in centre for manager cabin and
Banking hall, with framework of G.I. Section of spacing 4'0" x2'0"
above with 12mm gypboard fixing. Rate is included for cutouts for
lights .The ceiling is putty finished and sanded to form clean and
homogeneous surface. Rate is included for two coats of acrylic
emulsion painting. 130.00 Sft
4.0 WALL PANELING
Providing and fixing of wooden paneling made out of salwood frame
at 2' centre to centre bothways in section size 2"x2" & covered with
9mm thk plywood and finished with 6mm thk white back painted
glass approved colour, 3" skirting of above 1' ht from ffl lvl and
border of 3" at ceiling lvl in BOB orange) 85.00 Sft
5.0 DIVIDER PARTITION
Divider partition to be done between each machines using non
glazed partition for a ht of 1'3" and fixed with 12mm thk glass for
3'9" ht as per design, with ss brackets 2.00 Nos
6.0 ROLLING SHUTTER BOX
Supplying & fixing of rolling shutter box using 18mm thk, plywood
with adequate support at the ends and finished with lamination of
approved make and colour etc., complete. (If required) 100.00 Sft
7.0 Providing and making cheque drop box 1'3"x1'6"x(9" deep ) as per
design & pattern with 19 mm ply finished exterior surface with 6mm
thick extra clear white painted glass having 4"x1" slots with 3 mm
thick S.S. plat pasted with metal adhesive. Rate shall includes all
necessary hardwares an d locking and side opening arrangements.
1.00 Nos
8.0
Sandwitch acrylic pamplet holder (architect approved color)
2.00 Nos
TOTAL INTERIOR RENOVATION AMOUNT
To,
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
SI NO DESCERIPTION OF WORK QTY
UNITS
A CDB (12WAY SPN DB)
1.0 12 Way SPN Distribution board with nuetral bar,earth bar,cables
ties,top and bottom removable gland plate and with necessary
adopter boxes if any. The DB should be IP 42 metallic double door
with provisioin of MCB & ELCB etc as required including cuting of
1 wall and plastering the same with neat finish.It comprising
as follows :-
( Make:MDS/Hager/CRABTREE)
Incomer : 12Way SPN DB (DCDKTHDDCW12)
DCMJCFPF032 - 32 A DP - 1 No
Outgoing:
DCMJCSPF - 10/16A SP MCBs - 6Nos 1.00 Set
2.0 Supply & Installation of 32A Metal Clad Socket with top in a
specified company manufactured box with suitable rating MCB for
connecting A/C Split point 2.00 Set
3.0 Supply and fixing of 63A Rotter Switch for UPS input 1.00 Set
4.0 Supply & Installation of 32/20A Metal Clad Socket with top in a
specified company manufactured box with suitable rating DP MCB
breaker type for connecting UPS point . 1.00 Set
B LT CABLES
Supply & Laying of the following cables in built up
trenches,on wall,
or in the ground as per the case may be,with proper clamping with
necessary fixing materials etc.Installing testing&commisioing of
1100V grade UG cable as per IS 7098/1554 (Finolex/ Universal)
1.0 4C x10Sqmm Copper Armoured Aluminium Cable (VDB to E-lobby)
40.00 Mtr
2.0 End Termination of the above cable with proper Glands and Lugs:
4Cx10sqmm 2.00 Set
C WIRING
1.0 Light/Fan point wiring with 3 of 1.5 sqmm Finolex PVC insulated
copper conductor to be laid in 2mm suitable PVC conduit with Bend,
Couplings,etc.. And fixing with PVC clamps screws etc.All conduits
to be laid above theconduit with Bend,Couplings, etc.. And fixing
with false ceiling/partition/concealed in the wall 6A Modular type
etc. plate and metal Box Wiring to be connected with supply &
fixing of switch (MK/ROMA/ CRABTREE) with suitable Modular
switches
a) One light Controlled by One Switch 2.00 Pts
b) Two Lights Controlled by one Switch 1.00 Pts
c) 6A Switch box Sockets in the switch board itself (combined
position only) 1.00 Pts
2.0 Supply & Wiring with Flame Retardant Insulated PVC copper wire
2 as per grade IS 994 for Circuits,Computer point,Power points
within 2mm thk PVc conduits with necessary accessories and
with proper clamps and to be concealed below the false ceiling
It comprises as follows: -
a) 3Runs of 2.5Sqmm copper wire in PVC conduit for circuit mains
(Circuit mains LDB to All switch boards) 25.00 Mtr
b) 3Runs of 2.5Sqmm copper wire in PVC conduit for computer points
(UPS wiring) 50.00 Mtr
c) 2Runs of 4Sqmm copper wire+2.5Sqmm copper wire in PVC
conduit for (Split AC wiring) 65.00 Mtr
d) 2Runs of 6Sqmm copper wire+2.5Sqmm copper wire in PVC
conduit for (UPS Input & output m/c) 15.00 Mtr
D POWER POINT OUTLETS
1.0 Supply & Installation of 3 Nos of 6A Sockets controlled by 1No 5
A Switches with front plate with enclosure and other accessories
etc..(MK/ROMA/CRABTREE) 4.00 Set
2.0 Supply & Installation of 1Nos of 16A Socket controlled by 1No 16A
Switch with front plate with enclosure and other accessories etc..
(MK/ROMA/CRABTREE) 6.00 Set
E LIGHTING FIXTURES
1.0 Supply, Fixing & Commisioning of Recess mounting type compact
vertical Flat Panel 34W LED fitting in Down Rods with white finish 3.00 Set
and other fixing accessories.,
2.0 Supply, Fixing & Commisioning of Recess mounting type compact
vertical round shaped 1x15W LED downlighter fitting with white
finish and other fixing accessories., 2.00 Set
3.0 Supply & fixing of Orange/warm colour LED FLEXI Strip Light fittings
in the stepped false ceiling area including the cost of wiring etc.,
complete. 5.00 Mtr
F DATA CABLING
1.0 Supplying & Fixing of D -Link CAT 6 10/100/1000 Mbps UTP Cable
including the cost of laying the cable etc.complete 60.00 Mtr
2.0 Supplying & Fixing of D -Link CAT 6 single information outlet
including the cost of punching & fixing etc., 4.00 Nos
3.0 Supplying & Fixing of D -Link CAT 6 7 Feet Patch cord 4.00 Nos
TOTAL ELECTRICAL AMOUNT FOR BRANCH
To, Date :
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
BOQ FOR THE AIRCONDITIONING WORKS OF BANK OF BARODA, MINI-LOBBY AT CHIKKABALLAPUR BRANCH
SI NO DESCERIPTION OF WORK QTY UNITS RATE AMOUNT
SPLIT AIR CONDITIONER
1.0 Installation Charge for Split AC 2.00 Nos
2.0 V-Guard Make 5 K va Voltage Stabilizer 2.00 Nos
3.0 Out door unit stand 2.00 Set
4.0 Supply & Laying of PVC drain pipe 10.00 Mtr
5.0 Civil works like cutting AC hole,packing,drain pipe cutting and
packing with mortar etc. 1.00 Ls
6.0 Supply and fixing of timer 1.00 Nos
TOTAL AIR-CONDITIONING AMOUNT
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
BOQ FOR THE MODULAR FURNITURE/CHAIRS WORKS FOR BANK OF BARODA AT CHIKKABALLAPUR BRANCH
S.NO. DESCRIPTION. QTY UNIT RATE AMOUNT
1.00 DM DESK of size 1800 x 900 x 750MM including
Keyboard
tray CPU trolly without any pedestal or credenza. 1.00 Nos.
2.00 LINEAR WORKSTATION OFFICER TABLE (1350MMx1100MM)
Providing designing and installing minimum 65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate section (minimum 40 mm x 40 mm) The frame structure covering and Top trim / side trim made out of MS with powder coating (50 microns). All MS Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 16 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 12mm thk MDF exterior grade with 1mm thk laminate till 1200mm height from the floor level for outside facia. Inside facia = fabric panel with MS sheet minimum 0.6mm thk and 12 mm MDF exterior grade panel with 1 mm laminate above table top (450 mm height). 12 mm MDF exterior grade panel and 1 mm 3.00 Nos.
The edges to be capped (as per approved design and drawing) MS end trim with powder coating. Cost to include that for provision of fixing switches & the necessary cut out for the same. The height of the partition to be 1200mm. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / MS race ways 2 nos / wire management cleats / runners etc. (Basic cost of fabric Rs. 200/- per running meter.)
3.00 LINEAR WORKSTATION STAFF TABLE (1200MMx600MM)
Providing designing and installing minimum 65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate section (minimum 40 mm x 40 mm) The frame structure covering and Top trim / side trim made out of MS with powder coating (50 microns). All MS Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 16 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 12mm thk MDF exterior grade with 1mm thk laminate till 1200mm height from the floor level for outside facia. Inside facia = fabric panel with MS sheet minimum 0.6mm thk and 12 mm MDF exterior grade panel with 1 mm laminate above table top (450 mm height). 12 mm MDF exterior grade panel and 1 mm 4.00 Nos.
The edges to be capped (as per approved design and drawing) MS end trim with powder coating. Cost to include that for provision of fixing switches & the necessary cut out for the same. The height of the partition to be 1200mm. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / MS race ways 2 nos / wire management cleats / runners etc. (Basic cost of fabric Rs. 200/- per running meter.)
4.00 CASH CABIN TABLE/ PATIOTION (1300MMx600MM)
Providing designing and installing minimum 65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate section (minimum 40 mm x 40 mm) The frame structure covering and Top trim / side trim made out of MS with powder coating (50 microns). All MS Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 16 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 12mm thk MDF exterior grade with 1mm thk laminate till 1200mm height from the floor level for outside facia. Inside facia = fabric panel with MS sheet minimum 0.6mm thk and 12 mm MDF exterior grade panel with 1 mm laminate above table top (450 mm height). 12 mm MDF exterior grade panel and 1 mm 2.00 Nos.
The edges to be capped (as per approved design and drawing) MS end trim with powder coating. Cost to include that for provision of fixing switches & the necessary cut out for the same. The height of the partition to be 1200mm. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / MS race ways 2 nos / wire management cleats / runners etc. (Basic cost of fabric Rs. 200/- per running meter.)
5.00 PEDESTAL
Providing and installing drawer boxes of size 585mm
ht., 390mm width and 500mm deep, top made out
of 25mm thk exterior grade MDF finished with 1.5mm
thk laminate, front and sides made of 12mm thk
MDF finished in 1mm thk laminate and back, drawer
bottom to be 10.00 Nos.
7.00 PULL OUT TRAY FOR KEYBOARD
Providing & Installing 480mm wide MS key board pull
out tray with (180mmx180mm) provision to house
mouse made out of MS with black matt finished
powder coating with telescopic channel. 10.00 Nos.
8.00 CPU TROLLEY
Providing & Installing 125mm to 225mm adjustable
CPU trolley made out of MS with black powder -
matt finish coating with lockable castors
(4 nos). 10.00 Nos.
9.00 GLASS DIVIDER
Providing & Installing quarter round (600mm radius)
12mm thk intermediate toughened frosted glass
divider with necessary fittings & hardware above
table top. The edges of the glass to be machine
polished as per drawing no 3731 - wd - 05 ñ 1.2 ñ
PROG 6.00 Nos.
10.00 LEG PANEL/GABLE END
Providing & Installing 600mm x 725mm Leg
panels/gable ends made up of 25mm thick MDF
exterior grade with 1mm thk laminate on both sides.
All edges to be lipped with minimum 2mm thick PVC
edging. Drawing number 3731 WD-02 -1.2-PROG 6.00 Nos.
11.00 SIDE CREDENZA 3'-0"x2'-6" 1.00 Nos.
12.00
MANAGER CHAIR 1.00 Nos.
Base: 5 star 680 mm dia M.S. Powder Coated.
Castors: 65 mm nylon twin castors with load
controlled braking. Class III Tested for minimum 1
lakh cycles.
Make MDI / WDF / of any equivalent.
Gas Lift: It is covered with telescope cover made of
polypropylene.
Seat: Cushion support is made of Polymide with steel
insert.Cushions are made of cold moulded Poly-
Urethane foam.
Density - app. 55-60 kg/m(, Shain hardness 6.8 kpa.
Special clip-on design enables removable cushion
assembly. Cushion seat in composite leather
upholstery(Basic Rs. 2000/Mts)
Multi position seat depth adjustmentSeat angle
adjustment- manual locking.
Back: Aluminium die cast back rest support-Silver
powder coated of polished. Polypropylene cushion
support.Cushions are made of cold moulded Poly-
Urethane foam. Back in composite leather
upholstery Density - app. 52-57 kg/m(, Shain
hardness 5.0 kpa. Special clip-on design enables
removable cushion assembly.
Lumbar support adjustable in height and curvature.
Back rest covered with PP injection molded shell.
Mechanism: Synchro mechanism. Back inclination
lockable in multi - position with safety clutch
features. Automatic back rest
tension control to suit user's body weight (45-100 kgs)
Diecast aluminium seat support.
Armrest: Multi functional arm rest with aluminium die
cast
support.(2 dimensional)
Head Rest : Height adjustment with no touch system
Lockable in multi positions Tilt adjustment by means
of 3 fold locking mechanism.
OFFICERS CHAIR 5.00 Nos.
Base: 5 star 680 mm dia M.S. Powder Coated.
Castors: 65 mm twin castors with load controlled
braking.
Gas Lift: Class III Tested for minimum 1 lakh cycles.
Make MDI / WDF / of any equivalent. It is covered
with telescope cover made of poly propylene.
Seat: Cushion support is made of injection moulded
plastic.
Cushions are made of cold moulded Poly-Urethane
13.00
foam with fabric upholstery Density - app. 55-60
kg/m(, Shain hardness
6.8 kpa. Special clip-on design enables removable
cushion assembly. Multi position seat depth
adjustment
Back: Back is moulded plastic frame with Net fabric
which enables air circulation -colour Black
Lumbar support adjustable in height and curvature.
Mechanism: Synchro mechanism. Back inclination
lockable in multi - position with safety clutch
features. Tension control -
Adjustment 45 to 90 Kgs. Most important features is
tension control knob is side activated telescopic
rotating motion which allows user a comfortable
way in seated position to regulate the
tension.Diecast aluminium seat support.It also has -
ve tilt features.
Armrest: Fixed / Height adjustable, arm rest with
aluminium
die cast support.
14.00 STAFF CHAIRS 4.00 Nos.
Base: 5 star 680 mm dia M.S. Powder Coated.
Castors: Twin castors 50 mm dia wheels made of
Poly Propylene
Gas Lift : Class III Tested for minimum 1 lakh cycles.
Make MDI / WDF / of any equivalent. It is covered
with telescope
cover made of poly propylene.
Seat: Cushion support is made of injection moulded
P.P. Support
& Cushions are covered by composite Fabric
upholstery cover.
Cushions are made of cold cured self-skinned
moulded Poly-
Urethane foam - Fire retardant. Density: min. 50
kgs/m(, Hardness
6.8 kpa. Seat depth adjustment (Optional)
Back: Cushion support is made of hot pressed
formed plywood.
Support & Cushions are covered by composite
leather upholstery
cover. Cushions are made of cold cured self-skinned
moulded
Poly-Urethane foam. Adjustable back height.
Mechanism: Synchro mechanism with forward
biased pivot location.
Back inclination lockable in multi - position with anti
shock features.
Support made of MS Powder Coated.- diecast and
plastic parts.
Additional features of -ve tilt. Tension control -
Adjustment 45 to
90 Kgs. Most important features is tension control
knob is side
activated telescopic rotating motion which allows
user a comfortable
way in seated position to regulate the tension.
Armrest: Moulded self-skinned PU/PP pads with steel
/ plastic bracket. Adjustable with 2D movements.
15.00
VISITORS CHAIRS 9.00 Nos.
Base: 620 mm dia GF Poly Propylene 5-star base
Castors: Twin castors 50 mm dia wheels made of
Poly Propylene.
Gas Lift: Class III Tested for minimum 1 lakh cycles.
Make MDI / WDF / of any equivalent.It is covered
with telescope
cover made of poly propylene.
Seat: Cushion support is made of hot pressed
plywood. Injection
moulded plastic seat shell with inbuilt stiffeners to
cover support
& cushions are made of cold cured self-skinned
moulded
foam having properties similar to Visco-Elastic foam
Density: 52-55 Kg/cm:, Tensile strength - 0.8-0.9
kg/cm:
Tear strength - 0.4 kg/cm:-(min), Resilience -
60%(min), Elongation
80% (minimum) Hardness - 8.5 to 9 kg at 25 %.
Dimension: seat depth 480 mm, width 620 mm with
arm.
Back: Cushion support is made of hot pressed
plywood.
Support & Cushions are covered with unique design
of half
upholstered & half plastic injection moulded shell.
Cushions are made of cold cured self-skinned
moulded Poly-
Urethane foam having properties similar to Visco-
Elastic foam.
Density: 52-55 Kg/cm:, Tensile strength - 0.8-0.9
kg/cm:
Tear strength - 0.4 kg/cm:-(min), Resilience -
60%(min), Elongation
80% (min) Hardness - 8.5 to 9 kg at 25 %.
Dimension: Back height 480 mm, width 515 mm.
Mechanism: 4 M Knee tilt synchro with pivot at front
edge of seat.
Back inclination lockable at Multi - positions with anti-shock
features Tension: Body weight control is 45-90 kgs.
Seat support: Embossed metal plate with powder coating.
Armrest: Fixed / Height adjustable, self skinned PP arms
with
steel bracket.
16.00
PERFORATED CHAIRS FOR CUSTOMER WAITING
Material: For Metro /Urban banking - Seating sofas
shall be with cushioned back and seatsahall be
made in black leather which makes the customer
waiting time more relaxing and comfortable.
Maintenance : Upholstery can be wiped with a
clean cloth daily and easy to maintain.
Location : Easily accessible and visible - Near Cashier
and front Office Staff.
For Rural/ Semi Urban - SS framed seat and back
with SS frame and base, finished.
Maintenance : Seat abd back can be wiped with a
clean cloth daily and easy to maintain.
3.00 Nos.
Modular Work &Chairs Total
The Deputy General Manager
Bank Of Baroda,
Regional Office, Bengaluru Rural,
M.G.Road, Bangalore.
Sub: Summary for the Proposed Interior & Electrical AC, Data and Chairs At Chikkaballapura
Branch.
S.NO. DESCRIPTION TOTAL
1.00 Furnishing work for Branch
2.00 Electical works for Branch
3.00 Air conditioning works for Branch
4.00 Interior Work For Mini Lobby
5.00 Electrical Work For Mini Lobby
6.00 Air conditioning works for Mini Lobby
7.00 Modular Furniture / Chairs Works
TOTAL
GST.@18%.
GRAND TOTAL