The Amodil Group · Dia15.40 • 304L 303 304L 303 Amodil Supplies Ltd Olarra UK Ltd The Amodil Group Amodil Supplies Ltd Olarra UK Ltd The Amodil Group Stock Range Stainless Steel

The Amodil GroupSpecialists In Stainless Steel Long Products

Round

Hexagon

Flat

Square

Angle

Billet

Seamless Pipe & Tube

Hollow Bar

Fittings

Wire Rod

Large Diameter Wire

Cold Heading Wire

Welding Wire

Over 5,000 tonnes ofStainless Steel stock


Contact Us

Headoffice&warehouse Northernsalesoffice (Kidderminster) (Manchester) Tel: 01299 270 771 Tel: 0161 962 0890 Fax: 01299 270 080 Fax: 0161 905 2951

[email protected] / [email protected]/www.olarra.co.uk

TheAmodilGroupisprivatelyownedandsuppliesStainlessSteelLongProductsfromitstwostockholdingsubsidiariesAmodilSuppliesLtdandOlarraUKLtd.

Formedin1976TheAmodilGrouphasgrowntobethelargestUKstockholderofthefollowingStainlessSteelLongProductswithover5,000tonnesatitsKidderminstersite.

• ACEROSINOXIDABLESOLARRASA • TUBACEXTUBOSINOXIDABLESSA• RODACCIAISPA • TUBACEXTAYLORACCESORIOSSA• ACERALAVASA • TUBOSREUNIDOSSA• OUTOKUMPUDEGERFORS • PRODUCTOSTUBULARESSA

ExclusiverepresentationandstrongpartnershipswiththefollowingEuropeanmillsenableustoofferalmostanycombinationofsize,grade,finishandtolerancefromproduction.

OverviewAmodilSuppliesLtd

OlarraUKLtd

The Amodil Group

Stainless Steel Billet

Stainless Steel Square Bar

Stainless Steel Hollow BarStainless Steel Seamless Pipe

Stainless Steel TIG Wire

Stainless Steel Large WireStainless Steel Cold Heading Wire

The Amodil GroupStock Range

Formed in 1976 The Amodil Group has grown to be the largest UK stockholder of Stainless Steel Long Products with over 5,000 tonnes at its Kidderminster site.

1 mm -‐ 18 mm Dia32 mm OD x 16 mm ID -‐ 250 mm OD x 200 mm ID1/8” NB -‐ 12” NB80 mm -‐ 450 mm Square20 mm x 20 mm x 3 mm -‐ 100 mm x 100 mm x 12 mm5 mm -‐ 4” Square12 mm -‐ 250 mm Wide x 3 mm -‐ 40 mm Thick4 mm -‐ 65 mm A/F3 mm -‐ 22” Dia

Stainless Steel Flat Bar

Stainless Steel Angle

Stainless Steel Round BarStainless Steel Hexagon Bar

Please Call Us For Prices

Kidderminster Office: 01299 270 771 • Manchester Office: 0161 962 0890

Fax: 01299 270 080 • Email: [email protected] • Web: www.amodil.co.uk

0.8 mm -‐ 5.0 mm Dia

1 mm -‐ 18 mm Dia

Exclusive representa[on and strong partnerships with many of the following European mills enable us to offer almost any combina[on of size, grade, finish and tolerance from produc[on.

〈 OUTOKUMPU DEGERFORS〈 ACERALAVA SA〈 RODACCIAI SPA 〈 ACEROS INOXIDABLES OLARRA SA 〈 TUBACEX TUBOS INOXIDABLES SA

〈 TUBACEX TAYLOR ACCESORIOS SA〈 TUBOS REUNIDOS SA〈 PRODUCTOS TUBULARES SA

Stainless Steel MIG Wire 0.6 mm -‐ 1.6 mm Dia

AmodilSuppliesLtdOlarraUKLtd

The Amodil GroupAdditional Services

Over1,000hoursofweeklycuttingcapacity

Cuttingupto520mmDia

Chamfering,bevelling&polishing

Additionaltesting&certificationavailablethroughourqualitydepartment

Packaging,protection&marking

24/48hourdeliveryservicenationwide,90%ofdeliveriesmadeonourowntransport

Exportingavailabletoallpartsoftheworld

Professional&knowledgeablesalesstaff

Specialistsincontracts&projectmanagement

Longtermfixedpricecontractswithnextdaydeliveries

Dedicatedexpeditingteam

Stock RangeStainless Steel Round Bar

Bright Drawn H9 / Centreless Ground H8

SIZE Kg/Mtr 304L 303 316L 416 431 SIZE Kg/Mtr 304L 303 316L 416 431

3 mm Dia 0.06 • • • 13 mm Dia 1.04 • • • • •1/8" Dia 0.06 • • • 14 mm Dia 1.12 • • • • •5/32" Dia 0.10 • 9/16" Dia 1.26 • • • • •4 mm Dia 0.10 • • • • • 15 mm Dia 1.39 • • • • •3/16" Dia 0.14 • • • 5/8" Dia 1.55 • • • • •5 mm Dia 0.15 • • • • • 16 mm Dia 1.58 • • • • •6 mm Dia 0.22 • • • • • 17 mm Dia 1.78 • • •1/4" Dia 0.25 • • • • • 11/16" Dia 1.88 • • •7 mm Dia 0.30 • • • 18 mm Dia 2.00 • • • • •9/32" Dia 0.31 • 19 mm Dia 2.22 • • • • •5/16" Dia 0.39 • • • • • 3/4" Dia 2.24 • • • • •8 mm Dia 0.39 • • • • • 20 mm Dia 2.46 • • • • •11/32" Dia 0.47 • 13/16" Dia 2.62 • • •9 mm Dia 0.50 • • • • • 22 mm Dia 2.98 • • • • •3/8" Dia 0.56 • • • • • 7/8" Dia 3.04 • • • • •10 mm Dia 0.62 • • • • • 25 mm Dia 3.85 •11 mm Dia 0.75 • • • 1" Dia 3.97 •7/16" Dia 0.76 • • • • • 30 mm Dia 5.54 •12 mm Dia 0.89 • • • 40 mm Dia 9.85 •1/2" Dia 0.99 • • • • • 50 mm Dia 15.40 •














The Amodil Group



Stainless Steel Round BarSmooth Turned / Centreless Ground

F51ST H10 ST K12 ST H10 ST K12 ST H10 ST K12 CG H9 ST H10 ST K12 ST H10 ST K12

24 mm Dia 3.55 • • •25 mm Dia 3.85 • • • • • •1" Dia 3.97 • • • • • • •28 mm Dia 4.83 • • •1 1/8" Dia 5.03 • • • • • •30 mm Dia 5.54 • • • • • • •1 1/4" Dia 6.21 • • • • • • •32 mm Dia 6.31 • • • •33 mm Dia 6.71 •1 3/8" Dia 7.51 • • • • • •35 mm Dia 7.54 • • • • •36 mm Dia 7.98 • • • •1 1/2" Dia 8.94 • • • • • • •40 mm Dia 9.85 • • • • • • •1 5/8" Dia 10.49 • • • • • •1 3/4" Dia 12.17 • • • • • • •45 mm Dia 12.47 • • • • • • •1 7/8" Dia 13.97 • • • • • •50 mm Dia 15.40 • • • • • • • • •2" Dia 15.89 • • • • • • • • •2 1/8" Dia 17.94 • • • • • •2 1/4" Dia 20.11 • • • • • • • •60 mm Dia 22.17 • • • • • •2 3/8" Dia 22.41 • • • • • •2 1/2" Dia 24.83 • • • • • • • •65 mm Dia 26.02 • •2 5/8" Dia 27.38 • • • • • • • •2 3/4" Dia 30.05 • • • • • • • • •70 mm Dia 30.18 • • •2 7/8" Dia 32.84 • • • • • •3" Dia 35.76 • • • • • • • • • • •80 mm Dia 39.42 • • • • •3 1/4" Dia 41.97 • • • • • •3 1/2" Dia 48.67 • • • • • •90 mm Dia 49.89 • • • •3 3/4" Dia 55.87 • • •100 mm Dia 61.59 • • • •


Stainless Steel Round BarSmooth Turned / Centreless Ground

SIZE Kg/Mtr 303S31 431S29 T416S21 P316S11304S11



Stainless Steel Round BarSmooth Turned K13 / K16

SIZE Kg/Mtr 304L 303 316L F51 SIZE Kg/Mtr 304L 316L F51

4" Dia 64.76 • • • • 9 1/2" Dia 367.81 • • •4 1/4" Dia 73.04 • • • • 10" Dia 407.39 • • •4 1/2" Dia 81.81 • • • • 10 1/2" Dia 448.65 • • •4 3/4" Dia 91.28 • • • • 11" Dia 491.89 • • •5" Dia 101.06 • • • • 11 1/4" Dia 514.26 • •5 1/4" Dia 111.33 • • • • 11 1/2" Dia 537.13 • • •5 1/2" Dia 122.10 • • • • 12" Dia 584.35 • • •5 3/4" Dia 133.37 • • • • 12 1/2" Dia 633.57 • • •6" Dia 145.14 • • • • 320 mm Dia 645.90 •6 1/4" Dia 157.41 • • • • 13" Dia 687.25 • •6 1/2" Dia 170.17 • • • • 340 mm Dia 728.20 • •6 3/4" Dia 183.43 • • • 14" Dia 795.82 • • •7" Dia 197.19 • • • • 14 1/2" Dia 853.10 • •7 1/4" Dia 211.78 • • • • 15" Dia 912.35 • • •7 1/2" Dia 226.55 • • • • 16" Dia 1038.86 • • •200 mm Dia 249.56 • • • 17" Dia 1171.43 • • •8" Dia 257.57 • • • • 18" Dia 1311.96 • • •8 1/2" Dia 291.52 • • • • 20" Dia 1619.42 • •220 mm Dia 306.45 • • • 520 mm Dia 1700.05 • •9" Dia 330.55 • • • 22" Dia 1947.73 • •



Stainless Steel HexagonAnnealed & Cold Drawn H11

SIZE Kg/Mtr 303S31 316S11 SIZE Kg/Mtr 303S31 316S114 mm A/F 0.11 • 0.920" A/F 3.78 • •0.187" A/F 0.16 • 0.9375" A/F 3.92 • •0.193" A/F 0.17 • 1.00" A/F 4.46 • •5 mm A/F 0.17 • • 1.010" A/F 4.55 • •6 mm A/F 0.25 • • 1.062" A/F 5.03 • •0.250" A/F 0.28 • • 27 mm A/F 5.05 • •7 mm A/F 0.34 • • 1.100" A/F 5.40 • •0.3125" A/F 0.44 • • 1.125" A/F 5.65 • •8 mm A/F 0.44 • • 30 mm A/F 6.23 • •0.324" A/F 0.47 • • 1.200" A/F 6.43 • •0.375" A/F 0.63 • • 1.250" A/F 6.97 • •10 mm A/F 0.69 • • 32 mm A/F 7.09 • •11 mm A/F 0.84 • • 1.300" A/F 7.54 • •0.4375" A/F 0.85 • • 1.3125" A/F 7.69 • •12 mm A/F 1.00 • • 1.375" A/F 8.44 • •0.500" A/F 1.12 • • 36 mm A/F 8.98 • •13 mm A/F 1.17 • • 1.480" A/F 9.77 • •0.525" A/F 1.23 • • 1.500" A/F 10.04 • •14 mm A/F 1.36 • • 41 mm A/F 11.64 • •0.5625" A/F 1.41 • • 1.625" A/F 11.78 • •0.600" A/F 1.61 • • 1.670" A/F 12.44 • •0.625" A/F 1.74 • • 1.750" A/F 13.67 • •16 mm A/F 1.77 • • 46 mm A/F 14.66 • •17 mm A/F 2.00 • • 1.860" A/F 15.44 • •0.6875"A/F 2.11 • • 50 mm A/F 17.32 • •0.710" A/F 2.25 • • 2.00" A/F 17.85 • •19 mm A/F 2.50 • • 2.050" A/F 18.75 • •0.750" A/F 2.51 • • 55 mm A/F 20.95 • •20 mm A/F 2.77 • • 2.220" A/F 21.99 • •0.8125" A/F 2.95 • • 60 mm A/F 24.94 •0.820" A/F 3.00 • • 2.375" A/F 25.17 • •22 mm A/F 3.35 • • 2.500" A/F 27.89 • •0.875" A/F 3.42 • • 65 mm A/F 29.27 • •


The Amodil Group



Stainless Steel Flat BarSlit & Edge Rolled BS EN 10058

SIZE Kg/Mtr 304L 316L SIZE Kg/Mtr 304L 316L SIZE Kg/Mtr 304L 316L12 x 3 mm 0.28 • • 30 x 6 mm 1.41 • • 20 x 10 mm 1.57 • •20 x 3 mm 0.47 • • 40 x 6 mm 1.88 • • 25 x 10 mm 1.96 • •25 x 3 mm 0.59 • • 45 x 6 mm 2.12 • • 30 x 10 mm 2.36 • •30 x 3 mm 0.71 • • 50 x 6 mm 2.36 • • 40 x 10 mm 3.14 • •40 x 3 mm 0.94 • • 60 x 6 mm 2.83 • • 50 x 10 mm 3.93 • •50 x 3 mm 1.18 • • 65 x 6 mm 3.06 • • 60 x 10 mm 4.71 • •60 x 3 mm 1.41 • • 75 x 6 mm 3.53 • • 65 x 10 mm 5.11 • •65 x 3 mm 1.53 • • 80 x 6 mm 3.77 • • 75 x 10 mm 5.89 • •75 x 3 mm 1.77 • • 100 x 6 mm 4.71 • • 80 x 10 mm 6.28 • •80 x 3 mm 1.88 • • 125 x 6 mm 5.89 • • 100 x 10 mm 7.85 • •100 x 3 mm 2.36 • • 130 x 6 mm 6.13 • • 125 x 10 mm 9.82 • •20 x 5 mm 0.79 • • 150 x 6 mm 7.07 • • 150 x 10 mm 11.78 • •25 x 5 mm 0.98 • • 200 x 6 mm 9.42 • • 200 x 10 mm 15.71 • •30 x 5 mm 1.18 • • 250 x 8 mm 11.78 • • 250 x 10 mm 19.63 • •40 x 5 mm 1.57 • • 20 x 8 mm 1.25 • • 25 x 12 mm 2.36 • •45 x 5 mm 1.77 • • 25 x 8 mm 1.57 • • 30 x 12 mm 2.83 • •50 x 5 mm 1.96 • • 30 x 8 mm 1.89 • • 40 x 12 mm 3.77 • •60 x 5 mm 2.36 • • 40 x 8 mm 2.51 • • 50 x 12 mm 4.71 • •65 x 5 mm 2.55 • • 50 x 8 mm 3.14 • • 60 x 12 mm 5.65 • •75 x 5 mm 2.95 • • 60 x 8 mm 3.77 • • 65 x 12 mm 6.13 • •80 x 5 mm 3.14 • • 65 x 8 mm 4.08 • • 75 x 12 mm 7.07 • •100 x 5 mm 3.93 • • 75 x 8 mm 4.71 • • 80 x 12 mm 7.54 • •150 x 5 mm 5.89 • • 80 x 8 mm 5.02 • • 100 x 12 mm 9.42 • •200 x 5 mm 7.85 • • 100 x 8 mm 6.28 • • 125 x 12 mm 11.78 • •12 x 6 mm 0.57 • • 150 x 8 mm 9.42 • • 150 x 12 mm 14.14 • •20 x 6 mm 0.94 • • 200 x 8 mm 12.53 • • 200 x 12 mm 18.85 • •25 x 6 mm 1.18 • • 250 x 8 mm 15.71 • • 250 x 12 mm 23.56 • •

Stock RangeStainless Steel Flat Bar

Hot Rolled Annealed & Pickled BS EN 10058

SIZE Kg/Mtr 304L 316L SIZE Kg/Mtr 304L 316L20 x 8 mm 1.26 • • 50 x 20 mm 7.85 • •20 x 10 mm 1.57 • • 60 x 20 mm 9.42 • •25 x 10 mm 1.96 • • 65 x 20 mm 10.21 • •30 x 10 mm 2.36 • • 75 x 20 mm 11.78 • •40 x 10 mm 3.14 • • 80 x 20 mm 12.57 • •20 x 12 mm 1.88 • • 100 x 20 mm 15.71 • •25 x 12 mm 2.36 • • 30 x 25 mm 5.89 • •30 x 12 mm 2.83 • • 40 x 25 mm 7.85 • •40 x 12 mm 3.77 • • 50 x 25 mm 9.82 • •20 x 15 mm 2.36 • • 60 x 25 mm 11.78 • •25 x 15 mm 2.95 • • 65 x 25 mm 12.76 • •30 x 15 mm 3.53 • • 75 x 25 mm 14.73 • •40 x 15 mm 4.71 • • 80 x 25 mm 15.71 • •50 x 15 mm 5.89 • • 100 x 25 mm 19.63 • •60 x 15 mm 7.07 • • 50 x 30 mm 11.78 • •65 x 15 mm 7.66 • • 60 x 30 mm 14.14 • •75 x 15 mm 8.84 • • 75 x 30 mm 17.67 • •80 x 15 mm 9.42 • • 80 x 30 mm 18.85 • •100 x 15 mm 11.78 • • 100 x 30 mm 23.56 • •25 x 20 mm 3.93 • • 50 x 40 mm 15.71 • •30 x 20 mm 4.71 • • 75 x 40 mm 23.56 • •40 x 20 mm 6.28 • • 100 x 40 mm 31.42 • •



Stainless Steel AngleHot Rolled Annealed & Pickled DIN 1028

SIZE Kg/Mtr 304L 316L20 x 20 x 3 mm 0.95 • •25 x 25 x 3 mm 1.20 • •30 x 30 x 3 mm 1.40 • •40 x 40 x 3 mm 1.90 • •50 x 50 x 3 mm 2.45 • •25 x 25 x 5 mm 1.90 • •30 x 30 x 5 mm 2.30 • •40 x 40 x 5 mm 3.10 • •50 x 50 x 5 mm 4.00 • •25 x 25 x 6 mm 2.20 • •30 x 30 x 6 mm 2.70 • •40 x 40 x 6 mm 3.75 • •50 x 50 x 6 mm 4.60 • •60 x 60 x 6 mm 5.60 • •65 x 65 x 6 mm 6.15 • •70 x 70 x 6 mm 6.52 • •75 x 75 x 6 mm 7.40 • •80 x 80 x 6 mm 7.60 • •100 x 100 x 6 mm 9.90 • •75 x 75 x 8 mm 9.40 • •80 x 80 x 8 mm 9.85 • •100 x 100 x 8 mm 13.00 • •50 x 50 x 10 mm 7.60 • •60 x 60 x 10 mm 8.70 • •70 x 70 x 10 mm 10.50 • •75 x 75 x 10 mm 11.50 • •80 x 80 x 10 mm 12.50 • •100 x 100 x 10 mm 15.50 • •100 x 100 x 12 mm 18.30 • •



Stainless Steel Square BarCold Drawn H11 / HRAP DIN 1014

SIZE Finish Kg/Mtr Lengths 304L 303 316L5 mm Sq CD H11 0.20 3 / 3.1 m • • •6 mm Sq CD H11 0.28 3 / 3.1 m • • •8 mm Sq CD H11 0.50 3 / 3.1 m • • •10 mm Sq CD H11 0.79 3 / 3.1 m • • •12 mm Sq CD H11 1.13 3 / 3.1 m • • •16 mm Sq CD H11 2.01 3 / 3.1 m • • •20 mm Sq CD H11 3.14 3 / 3.1 m • • •25 mm Sq CD H11 4.91 3 / 3.1 m • • •25 mm Sq HRAP 4.91 4 / 4.5 m • • •1" Sq HRAP 5.06 4 / 4.5 m • •30 mm Sq HRAP 7.07 4 / 4.5 m • •1 1/4" Sq HRAP 7.90 4 / 4.5 m • •1 1/2" Sq HRAP 11.38 4 / 4.5 m • •40 mm Sq HRAP 12.57 4 / 4.5 m • •1 3/4" Sq HRAP 15.49 4 / 4.5 m • •50 mm Sq HRAP 19.63 4 / 4.5 m • •2" Sq HRAP 20.24 4 / 4.5 m • •2 1/2" Sq HRAP 31.62 4 / 4.5 m • •3" Sq HRAP 45.53 4 / 4.5 m • •3 1/2" Sq HRAP 61.98 4 / 4.5 m • •4" Sq HRAP 80.95 4 / 4.5 m • •






Stainless Steel Billet

80mm Sq Rolled • • • • •100mm Sq Rolled • • • • •125mm Sq Rolled • • • • •150mm Sq Rolled • • • • •200mm Sq Forged • • • • •235mm Sq Forged • • • • •250mm Sq Forged • • • • •300mm Sq Forged • • • • •350mm Sq Forged • • • • •400mm Sq Forged • • • • •450mm Sq Forged • • • • •

SIZE CONDITION F316L F304L F51 F55 17/4 PH







Thefollowinggradesarealsoavailablefromproduction:416,420,F6NM,303,304H,321H,347H,316H,317L,309,310,

904L,F44,600,800,800H,800HT,F20,825


The Amodil GroupProduction

Stainless Steel Wire Rod

AsexclusiveUKagentsforOlarraSASpain,OlarraUKLtdcanofferacomprehensiverangeofStainlessSteelWireRodinCoilonamanufacturedtoorderbasis.

HotRolledAnnealed&PickledaccordingtoBSEN10088-2005,ASTMA580.

Round Wire Rod

5.5-33mmDia

Hexagon Wire Rod

17-25.5mmA/F

MostAusteniticgradesavailable,includingMecamaxImprovedMachinability.

Suppliedincoilweights1200/1350Kgs.


The Amodil Group



Stainless Steel Seamless Pipe

Wecanofferthefollowinggradesofmaterialona10-14dayleadtime:304H,321H,316H,316Ti,317,314,347H,310,UNSS31254,904L,UNSN08020,UNSN08825.

Production Seamless Pipe

ThroughourWesternEuropeanmillpartnersTheAmodilGroupoffersavastrangeofseamlesstubularproducts.Ourgroupcanproducefrom6mm–24”ODwithawiderangeofwallthicknessesinCarbonSteel,AlloySteel,StainlessSteel,Duplex,

SuperAusteniticandHighNickelAlloys.

Applications include:Line Pipe

Process Pipe FurnaceTubesBoilerTubing

RifleBoilerTubingHeatExchangers

InstrumentationTubingMechanicalTubing

CasingOCTGCMV

UREAServicePrecisionTubing

RedrawingHollowsHollowBar

ButtWeldFittings

Industry standards include: ASTM,ASME,EN,DIN,ISO,AISI,NACE,Norsok,PED,BS,APIandmanymore.

Pleaseenquireforfurtherinformation.

⅛” NB SCH 40 0.37 • 2 ½” NB SCH 40 8.77 • • • •¼” NB SCH 10 0.49 • • 2 ½” NB SCH 80 11.58 • • •¼” NB SCH 40 0.63 • • 3” NB SCH 10 6.56 • • • •¼” NB SCH 80 0.80 • • 3” NB SCH 40 11.47 • • • •⅜” NB SCH 10 0.63 • • 3” NB SCH 80 15.51 • • • •⅜” NB SCH 40 0.84 • • 3” NB SCH 160 21.67 • • •⅜” NB SCH 80 1.10 • • 3” NB SCH XXS 28.11 • • •½” NB SCH 10 1.01 • • 3 ½” NB SCH 10 7.53 • •½” NB SCH 40 1.29 • • • • 3 ½” NB SCH 40 13.78 • •½” NB SCH 80 1.64 • • • • 3 ½” NB SCH 80 18.92 • •½” NB SCH 160 1.98 • • • • 4” NB SCH 10 8.50 • • • •¾” NB SCH 10 1.30 • • 4” NB SCH 40 16.32 • • • •¾” NB SCH 40 1.71 • • • • 4” NB SCH 80 22.67 • • • •¾” NB SCH 80 2.23 • • • • 4” NB SCH 120 28.75 • • •¾” NB SCH 160 2.94 • • • • 4” NB SCH 160 34.05 • • •1” NB SCH 10 2.13 • • • • 4” NB SCH XXS 41.66 • • •1” NB SCH 40 2.54 • • • • 5” NB SCH 40 22.10 • •1” NB SCH 80 3.29 • • • • 5” NB SCH 80 31.44 • • •1” NB SCH 160 4.30 • • • • 5" NB SCH 160 49.87 • •1” NB SCH XXS 5.53 • • 6” NB SCH 10 14.04 • • • •1 ¼” NB SCH 10 2.74 • • 6” NB SCH 40 28.70 • • • •1 ¼” NB SCH 40 3.44 • • 6” NB SCH 80 43.22 • • • •1 ¼” NB SCH 80 4.54 • • • 6” NB SCH 120 55.04 • • •1 ½” NB SCH 10 3.16 • • • • 6” NB SCH 160 68.60 • • •1 ½” NB SCH 40 4.11 • • • • 6” NB SCH XXS 80.44 • •1 ½” NB SCH 80 5.50 • • • • 8” NB SCH 10 20.27 • •1 ½” NB SCH 160 7.36 • • • • 8” NB SCH 40 43.20 • • • •1 ½” NB SCH XXS 9.70 • • 8” NB SCH 80 65.64 • • • •2” NB SCH 10 3.99 • • • • 8” NB SCH 120 91.83 • •2” NB SCH 40 5.52 • • • • 8” NB SCH 160 112.98 • • •2” NB SCH 80 7.60 • • • • 10” NB SCH 40S 61.23 • •2” NB SCH 160 11.28 • • • • 10” NB SCH 80S 82.79 • •2” NB SCH XXS 13.65 • • 12” NB SCH 40S 74.92 • •2 ½” NB SCH 10 5.34 • • 12” NB SCH 80S 98.88 •

We can offer the following grades of material on a 10 -‐ 14 day lead Ome:304H, 321H, 316H, 316Ti, 317, 314, 347H, 310, UNS S31254, 904L, UNS N08020, UNS N08825,

UNS N08811, UNS N08810, UNS N08800.


Stainless Steel Seamless PipeS31803

S32750S32760

304L 316L 304L 316LSIZE Kg/Mtr S31803S32750S32760

SIZE Kg/Mtr


The Amodil Group


The Amodil GroupStock Range & Production

Hollow Bar

ThefollowingrangeofHollowBarisavailableinStainlessSteelandDuplexfromourgroupstockofover600tonnes:

32mmODX16mmID-250mmODX200mmID

WealsoofferHollowBarfromproductioninCarbonSteel,AlloySteel,StainlessSteel,DuplexandNickelAlloys:

32mmODX16mmID-650mmODX600mmID


Stock Range & ProductionSeamless Fittings

ThefollowingrangeofFittingsareavailableinCarbonSteel,AlloySteel,StainlessSteel,Duplex&NickelAlloysfromproduction:

ReturnBends&ElbowswithLong&ShortRadius: ½”NBto10”NB SCH10toSCHXXS

Concentric&EccentricReducers:2”NBX1”NBto12”NBX10”NB

Someitemsareavailableexstockoronshortleadtimes.



The Amodil Group



Stainless Steel Large Wire

WearetheUKleadingsuppliersofStainlessSteelLargeWirefromstockfor immediatedeliveryormanufacturedtoyourexactspecification.

GRADES204Cu302303/1.4305304/1.4301 1 -‐ 18 mm Dia304L/1.4307302HQ305/1.4305 25 -‐ 1,000 Kgs coils310 Precision wound / Loose wound314/1.4845 On formers / Loose on a pallet316/1.4401316L/1.4404316Ti/1.4571 • Annealed321/1.4541 • Bright drawn using oil347/1.4556 • Stearate coated430/1.4016410/1.4006

SIZE RANGE:

PACKAGING:

FINISH:

Stock RangeStainless Steel

Cold Heading Wire

WearetheUKleadingsuppliersofStainlessSteelColdHeadingWirefromstockforimmediatedeliveryormanufacturedtoyourexactspecification.

SIZE RANGE:

PACKAGING:

FINISH:

305/1.4303

410/1.4006

430/1.4016

302HQ

321/1.4541

316Cu/1.4578

316L/1.4404

304Cu/1.4567

GRADES

1 -‐ 18 mm Dia

25 -‐ 1,000 Kgs coilsPrecision wound / Loose woundOn formers / Loose on a pallet

• Annealed• Bright drawn using oil• Stearate coated


The Amodil Group


The Amodil Group

Grade 0.60 mm Dia 0.80 mm Dia 1.00 mm Dia 1.20 mm Dia

307Si • • •308L • • •308LSi • • •309LSi • • •310 • • •312 • • •316L • • •316LSi • • • •347 • • •

Grade 0.80 mm Dia 1.00 mm Dia

308LSi • •316LSi • •

0.80 mm Dia 1.00 mm Dia 1.20 mm Dia 1.60 mm Dia 2.40 mm Dia 3.20 mm Dia

• • • • • •• • • • •• • • • •• • • • •

• • • • • •• • • • •• • • • •

308L

Grade

347316LSi316L312310309L


307Si • • •308L • • •308LSi • • •309LSi • • •310 • • •312 • • •316L • • •316LSi • • • •347 • • •


308LSi • •316LSi • •


• • • • • •• • • • •• • • • •• • • • •

• • • • • •• • • • •• • • • •

308L

Grade

347316LSi316L312310309L


307Si • • •308L • • •308LSi • • •309LSi • • •310 • • •312 • • •316L • • •316LSi • • • •347 • • •


308LSi • •316LSi • •


• • • • • •• • • • •• • • • •• • • • •

• • • • • •• • • • •• • • • •

308L

Grade

347316LSi316L312310309L

Stock RangeStainless Steel Welding Wire

MIG & TIG

MIG - 15 Kg Blue Wire Basket (BS300)

MIG - 5 Kg Plastic Spool (D200)

TIG - 5 Kg 1 Metre Long

ProductionStainless Steel Welding Wire

GRADES PRODUCT SIZE PACKAGINGRW 307RW 307LRW 307SiRW 308LRW 308 LAWSRW308LSiRW 308HRW 309LRW 309SiRW 309LSiRW 309HRW 309 LMoRW 310RW 312RW 316LRW 316 LAWSRW 316LSiRW 316HRW 317 LAWSRW 318SiRW 347RW 347SiRW 385RW 2209RW 410RW 410 NiMoRW 4122RW 420RW 420CRW 430RW 430 LNb

CORE WIRE

mm Diameter: 0.60 -‐ 0.80 -‐ 0.90 -‐ 1.00 -‐ 1.20 -‐ 1.60

mm Diameter: 0.80 -‐ 1.00 -‐ 1.20 -‐ 1.60 -‐ 2.00 -‐ 2.40 -‐ 3.20 -‐ 4.00 -‐ 5.00

mm Diameter: 1.60 -‐ 2.00 -‐ 2.40 -‐ 3.20 -‐ 4.00

mm Diameter: 1.60 -‐ 2.00 -‐ 2.50 -‐ 3.25 -‐ 4.00 -‐ 5.00

D200 Plas=c Spool 5 Kg D300 Plas=c Spool 12.5 -‐ 15 Kg BS300 Blue Wire Basket 15 Kg Wooden Spool Approximately 250 Kg Drums -‐ 100 -‐ 250 Kg

Lengths: 1000 mm Weight: 5 Kg or 10 Kg

K415 Wire Basket 25 Kg Drums 300 Kg

Lengths: 250 -‐ 450 mm Weight: 500 -‐ 800 Kg

MIG

TIG

SUBMERGED ARC

NB

Inches ANSI B36.19 Inches mm Inches mm

⅛ 40 0.405 10.29 0.068 1.73 0.3710 0.54 13.72 0.065 1.65 0.4940 0.088 2.24 0.6380 0.119 3.02 0.8010 0.675 17.15 0.065 1.65 0.6340 0.091 2.31 0.8480 0.126 3.2 1.10

5S 0.84 21.35 0.064 1.65 0.8110S 0.083 2.11 1.01

STD 40 40S 0.109 2.77 1.29XS 80 80S 0.147 3.73 1.64

160 0.187 4.75 1.98XXS 0.294 7.47 2.59

5S 1.05 26.67 0.064 1.65 1.0410S 0.083 2.11 1.30

STD 40 40S 0.113 2.87 1.71XS 80 80S 0.154 3.91 2.23

160 0.218 5.54 2.94XXS 0.308 7.82 3.70

5S 1.315 33.4 0.064 1.65 1.3110S 0.109 2.77 2.13

40 40S 0.133 3.38 2.5480 80S 0.179 4.55 3.29160 0.25 6.35 4.30XXS 0.358 9.09 5.53

5S 1.66 42.16 0.064 1.65 1.6810S 0.109 2.77 2.74

STD 40 40S 0.14 3.56 3.44XS 80 80S 0.191 4.85 4.54

160 0.25 6.35 5.70XXS 0.382 9.7 7.89

5S 1.9 48.26 0.064 1.65 1.9310S 0.109 2.77 3.16

STD 40 40S 0.145 3.68 4.11XS 80 80S 0.2 5.08 5.50

160 0.281 7.14 7.36XXS 0.4 10.16 9.70

5S 2.375 60.33 0.064 1.65 2.4210S 0.109 2.77 3.99

STD 40 40S 0.154 3.91 5.52XS 80 80S 0.218 5.54 7.60

160 0.348 8.74 11.28XXS 0.436 11.07 13.65

5S 2.875 73.03 0.083 2.11 3.7510S 0.12 3.05 5.34

STD 40 40S 0.203 5.16 8.77XS 80 80S 0.276 7.01 11.58

160 0.375 9.53 15.15XXS 0.552 14.02 20.71

5S 3.5 88.9 0.083 2.11 4.5910S 0.12 3.05 6.56

STD 40 40S 0.216 5.49 11.47XS 80 80S 0.3 7.62 15.51

160 0.437 11.13 21.67XXS 0.6 15.24 28.11

10S 4 101.69 0.12 3.05 7.53STD 40 40S 0.226 5.74 13.78XS 80 80S 0.318 8.07 18.92

10S 4.5 114.3 0.12 3.05 8.50STD 40 40S 0.237 6.02 16.32XS 80 80S 0.337 8.56 22.67

120 0.439 11.13 28.75160 0.531 13.49 34.05XXS 0.674 17.12 41.66

The Amodil Group

Schedule Outside Diameter Wall Thickness

3

2

2 ½

1 ¼

1 ½

¾

1

⅜

½

¼

Dimensions & Weights of Stainless Steel Pipe Seamless & Welded

ANSI B36.10 Kg/Mtr

Kidderminster Office: 01299 270 771 • Manchester Office: 0161 962 0890Fax: 01299 270 080 • Email: [email protected] • Web: www.amodil.co.uk

4

3 ½


The Amodil Group


The Amodil GroupWeight Chart

Stainless Steel Seamless & Welded PipeWeight Chart

Stainless Steel Seamless & Welded PipeNB

Inches ANSI B36.19 Inches mm Inches mm

STD 40 40S 0.258 6.55 22.10XS 80 80S 0.375 9.52 31.44

120 0.501 12.70 40.90160 0.625 15.88 49.87XXS 0.750 19.05 58.32

10S 0.134 3.40 14.04STD 40 40S 0.280 7.11 28.70XS 80 80S 0.432 10.97 43.22

120 0.563 14.28 55.04160 0.719 18.26 68.60XXS 0.864 21.95 80.4410 10S 0.148 3.76 20.2720 0.250 6.35 33.8330 0.277 7.04 36.81

STD 40 40S 0.322 8.18 43.2060 0.406 10.31 53.08

XS 80 80S 0.500 12.70 65.64100 0.594 15.09 77.09120 0.719 18.26 91.83140 0.812 20.62 102.48

XXS 0.875 22.23 109.59160 0.906 23.01 112.9830 0.307 7.80 51.81

STD 40 40S 0.365 9.27 61.23XS 60 80S 0.500 12.70 82.79

80 0.594 15.09 97.29100 0.719 18.26 116.38120 0.844 21.44 134.91

XXS 140 1.000 25.40 157.51160 1.125 28.58 174.95

STD 40S 0.375 9.53 74.9240 0.406 10.31 80.94

XS 80S 0.500 12.70 98.8860 0.562 14.27 110.6280 0.688 17.48 133.80100 0.844 21.44 162.14

XXS 120 1.000 25.40 189.82140 1.125 28.58 211.31160 1.312 33.32 242.40

STD 30 40S 0.375 9.53 82.5840 0.438 11.13 96.00

XS 80S 0.500 12.70 109.0460 0.594 15.09 128.4280 0.750 19.05 160.54100 0.938 23.83 197.74120 1.094 27.79 227.89140 1.250 31.75 257.47160 1.406 35.71 286.04

STD 30 40S 0.375 9.53 94.71XS 40 80S 0.500 12.70 125.20

60 0.656 16.66 162.5980 0.844 21.44 206.40100 1.031 26.19 249.34120 1.219 30.96 290.88140 1.438 36.53 338.07160 1.594 40.49 370.74

STD 40S 0.375 9.53 106.83XS 80S 0.500 12.70 141.36

40 0.562 14.27 158.2760 0.750 19.05 209.0080 0.938 23.83 258.29100 1.156 29.36 314.54120 1.375 34.93 369.34140 1.562 39.67 414.75160 1.781 45.24 466.67

141.3

14 14 355.6

6 6.625 168.28

16 16 406.4

10 10.75 273.1

12 12.75 323.9

18 18 457

8 8.625 219.1

Schedule Outside Diameter Wall Thickness

Kg/Mtr ANSI B36.10

5 5.563


The Amodil Group


The Amodil GroupWeight Chart

Stainless Steel Hollow BarWeight Chart

Stainless Steel Hollow Bar

Wall Thickness

mm20 6 4.20 60 7.5 13.80

16 8 5.10 56 9.5 16.70

50 12.5 20.60

45 15 23.50

40 17.5 26.10

25 5.5 4.60 63 8.5 16.50

20 8 6.00 56 12 21.60

16 10 6.80 50 15 25.50

45 17.5 28.50

40 20 31.10

28 6.0 5.50 95 75 10 23.10

25 7.5 6.50 69 13 28.40

20 10 7.90 63 16 33.30

56 19.5 38.40

50 22.5 42.30

32 6.5 6.70 100 80 10 23.80

28 8.5 8.20 75 12.5 29.30

20 12.5 10.60 71 14.5 32.90

63 18.5 39.50

56 22 44.60

36 7.0 8.10 106 85 10.5 27.40

32 9 9.80 80 13 32.50

25 12.5 12.20 71 17.5 40.80

63 21.5 47.40

56 25 52.50

40 8 10.30 112 90 11 30.40

36 10 12.00 85 13.5 35.80

28 14.0 15.30 80 16 40.80

71 20.5 49.20

63 24.5 55.70

50 6.5 10.00 118 95 11.5 33.50

45 9 12.90 90 14 39.20

40 11.5 15.60 80 19 49.60

36 13.5 17.50 71 23.5 58.00

32 15.5 19.00 63 27.5 64.50

56 7.5 12.90 125 100 12.5 38.40

50 10.5 16.80 95 15 44.40

45 13 19.80 90 17.5 50.10

40 15.5 22.40 80 22.5 60.50

36 17.5 24.30 71 27 68.80

56

32

36

40

63

71

45

50

75

80

Outside Diameter

mm

Inside Diameter

mm

Wall Thickness

mmKg/Mtr

Outside Diameter

mm

Inside Diameter

mm Kg/Mtr

Outside Diameter

mm

Inside Diameter

mm

Wall Thickness

mmKg/Mtr

Outside Diameter

mm

Inside Diameter

mm

Wall Thickness

mmKg/Mtr

132 106 13 42.30 160 15 73.40

98 17 52.30 150 20 92.50

90 21 61.60 132 29 123.60

80 26 72.00 118 36 145.10

71 30.5 80.30 106 42 161.50

140 112 14 48.20 200 160 20 98.30

106 17 56.20 150 25 117.40

100 20 63.80 140 30 135.10

90 25 75.40 130 35 151.70

80 30 85.90 112 44 178.40

125 12.5 47.80 212 170 21 109.70

118 16 58.20 150 31 148.90

106 22 74.70 130 41 183.30

95 27.5 88.30 125 43.5 191.10

80 35 104.40

132 14 56.60 224 180 22 121.60

122 19 72.10 170 27 143.10

112 24 86.50 160 32 163.30

100 30 102.10 140 42 200.10

90 35 113.70 132 46 213.40

140 15 64.30 236 190 23 134.10

130 20 80.80 170 33 178.30

118 26 99.10 150 43 217.60

110 30 110.30 140 48 235.30

100 35 123.20

150 15 68.80 240 190 25 146.30

140 20 86.60 170 35 190.50

125 27.5 111.00 250 200 25 153.70

112 34 129.90 186 32 186.80

100 40 145.50

150

160

170

180

190


The Amodil Group


The Amodil GroupTechnical Information

Bar Tolerances

Square Bar Hot Rolled DIN 1014

Width mm Width Thickness Width Thickness Width Thickness

10 – 40 mm +/-‐ 0.75 +/-‐ 0.5 +/-‐ 0.75 +/-‐ 1.0 +/-‐ 0.75 +/-‐ 1.5

41 – 80 mm +/-‐ 1.0 +/-‐ 0.5 +/-‐ 1.0 +/-‐ 1.0 +/-‐ 1.0 +/-‐ 1.5

81 – 100 mm +/-‐ 1.5 +/-‐ 0.5 +/-‐ 1.5 +/-‐ 1.0 +/-‐ 1.5 +/-‐ 1.5

101 – 120 mm +/-‐ 2.0 +/-‐ 0.5 +/-‐ 2.0 +/-‐ 1.0 +/-‐ 2.0 +/-‐ 1.5

121 – 150 mm +/-‐ 2.5 +/-‐ 0.5 +/-‐ 2.5 +/-‐ 1.0 +/-‐ 2.5 +/-‐ 1.5

Tolerance

Width Tolerance

Size Thickness 3 – 20 mm

Thickness 21 – 40 mm


Size Width X Thickness

20 – 50 X 3 -‐ 10 mm

60 – 100 X 5 -‐ 13 mm +/-‐ 0.75

+/-‐ 0.50

Thickness Tolerance

+/-‐ 1.50

+/-‐ 1.00

Width mm Width Thickness Width Thickness Width Thickness

10 – 40 mm +/-‐ 0.75 +/-‐ 0.5 +/-‐ 0.75 +/-‐ 1.0 +/-‐ 0.75 +/-‐ 1.5

41 – 80 mm +/-‐ 1.0 +/-‐ 0.5 +/-‐ 1.0 +/-‐ 1.0 +/-‐ 1.0 +/-‐ 1.5

81 – 100 mm +/-‐ 1.5 +/-‐ 0.5 +/-‐ 1.5 +/-‐ 1.0 +/-‐ 1.5 +/-‐ 1.5

101 – 120 mm +/-‐ 2.0 +/-‐ 0.5 +/-‐ 2.0 +/-‐ 1.0 +/-‐ 2.0 +/-‐ 1.5

121 – 150 mm +/-‐ 2.5 +/-‐ 0.5 +/-‐ 2.5 +/-‐ 1.0 +/-‐ 2.5 +/-‐ 1.5

Tolerance

Width Tolerance

Size Thickness 3 – 20 mm



Size Width X Thickness

20 – 50 X 3 -‐ 10 mm

60 – 100 X 5 -‐ 13 mm +/-‐ 0.75

+/-‐ 0.50

Thickness Tolerance

+/-‐ 1.50

+/-‐ 1.00

Flat Bar Slit Edge Rolled & Hot Rolled BS EN 10058

Angle Hot Rolled DIN 1028

Technical Information Bar Tolerances

Round, Hexagon & Square BarH = Minus K = Plus J = Symmetrical

Size 6 7 8 9 10 11 12 13 14 15 16

> 1 – 3 mm 0.006 0.010 0.014 0.025 -‐ -‐ -‐ -‐ 0.250 0.400 -‐

> 3 – 6 mm 0.008 0.012 0.018 0.030 0.048 0.075 0.120 -‐ 0.300 0.480 0.750

> 6 – 10 mm 0.009 0.015 0.022 0.036 0.059 0.090 0.150 -‐ 0.360 0.580 0.900

> 10 – 18 mm 0.011 0.018 0.027 0.043 0.070 0.110 0.180 -‐ 0.430 0.700 1.100

> 18 – 30 mm 0.013 0.021 0.033 0.052 0.084 0.130 0.210 0.330 0.520 0.820 1.300

> 30 – 50 mm 0.016 0.025 0.039 0.062 0.100 0.160 0.250 0.390 0.620 1.000 1.600

> 50 – 80 mm 0.019 0.030 0.046 0.074 0.120 0.190 0.300 0.460 0.740 1.200 1.900

> 80 – 120 mm 0.022 0.035 0.054 0.087 0.140 0.220 0.350 0.540 0.870 1.400 2.200

> 120 – 180 mm -‐ -‐ 0.063 0.100 0.160 0.250 0.400 0.630 1.000 1.600 2.500

> 180 – 250 mm -‐ -‐ -‐ 0.115 0.185 0.290 0.460 0.720 1.150 1.850 2.900

> 250 – 315 mm -‐ -‐ -‐ 0.130 0.210 0.320 0.520 0.810 1.300 2.100 3.200

> 315 – 400 mm -‐ -‐ -‐ -‐ -‐ 0.360 0.570 0.900 1.400 2.300 3.600

> 400 – 500 mm -‐ -‐ -‐ -‐ -‐ 0.400 0.630 -‐ 1.550 2.500 4.000

> 500 – 630 mm -‐ -‐ -‐ -‐ -‐ 0.440 0.700 -‐ 1.750 2.900 4.400

+/-‐ 1.30 mm

+/-‐ 1.50 mm

+/-‐ 2.00 mm

The Amodil GroupStainless Steel Bar Tolerances

Round & Hexagon BarH = Minus K = Plus J = Symmetrical

Tolerance

6 – 15 mm Sq

16 – 25 mm Sq

52 -‐ 80mm Sq

83 -‐ 100 mm Sq

101 -‐ 120 mm Sq

125 -‐ 150 mm Sq

+/-‐ 1.00 mm

+/-‐ 0.80 mm

+/-‐ 0.50 mm

+/-‐ 0.60 mm

Hot Rolled Square Bar DIN 1014

Size

36 – 50 mm Sq

26 – 35 mm Sq

Tolerance

+/-‐ 0.40 mm

Size 6 7 8 9 10 11 12 13 14 15 16

> 1 – 3 mm 0.006 0.010 0.014 0.025 -‐ -‐ -‐ -‐ 0.250 0.400 -‐

> 3 – 6 mm 0.008 0.012 0.018 0.030 0.048 0.075 0.120 -‐ 0.300 0.480 0.750

> 6 – 10 mm 0.009 0.015 0.022 0.036 0.059 0.090 0.150 -‐ 0.360 0.580 0.900

> 10 – 18 mm 0.011 0.018 0.027 0.043 0.070 0.110 0.180 -‐ 0.430 0.700 1.100

> 18 – 30 mm 0.013 0.021 0.033 0.052 0.084 0.130 0.210 0.330 0.520 0.820 1.300

> 30 – 50 mm 0.016 0.025 0.039 0.062 0.100 0.160 0.250 0.390 0.620 1.000 1.600

> 50 – 80 mm 0.019 0.030 0.046 0.074 0.120 0.190 0.300 0.460 0.740 1.200 1.900

> 80 – 120 mm 0.022 0.035 0.054 0.087 0.140 0.220 0.350 0.540 0.870 1.400 2.200

> 120 – 180 mm -‐ -‐ 0.063 0.100 0.160 0.250 0.400 0.630 1.000 1.600 2.500

> 180 – 250 mm -‐ -‐ -‐ 0.115 0.185 0.290 0.460 0.720 1.150 1.850 2.900

> 250 – 315 mm -‐ -‐ -‐ 0.130 0.210 0.320 0.520 0.810 1.300 2.100 3.200

> 315 – 400 mm -‐ -‐ -‐ -‐ -‐ 0.360 0.570 0.900 1.400 2.300 3.600

> 400 – 500 mm -‐ -‐ -‐ -‐ -‐ 0.400 0.630 -‐ 1.550 2.500 4.000

> 500 – 630 mm -‐ -‐ -‐ -‐ -‐ 0.440 0.700 -‐ 1.750 2.900 4.400

+/-‐ 1.30 mm

+/-‐ 1.50 mm

+/-‐ 2.00 mm

The Amodil GroupStainless Steel Bar Tolerances

Round & Hexagon BarH = Minus K = Plus J = Symmetrical

Tolerance

6 – 15 mm Sq

16 – 25 mm Sq

52 -‐ 80mm Sq

83 -‐ 100 mm Sq

101 -‐ 120 mm Sq

125 -‐ 150 mm Sq

+/-‐ 1.00 mm

+/-‐ 0.80 mm

+/-‐ 0.50 mm

+/-‐ 0.60 mm

Hot Rolled Square Bar DIN 1014

Size

36 – 50 mm Sq

26 – 35 mm Sq

Tolerance

+/-‐ 0.40 mm


The Amodil Group



Head office & warehouseForestPark,CleoburyMortimer,

Kidderminster,Worcestershire,DY149BDTel: 01299 270771 Fax: 01299 270080

Northern sales officeSuite11,StamfordHouse,NorthendenRoad,

Sale,Manchester,M332DHTel: 0161 962 0890 Fax: 0161 905 2951

[email protected] / [email protected]/www.olarra.co.uk

C Si Mn Cr Mo Ni≤ ≤ ≤

1.4305 X10CrNiS18-‐09 303 S30300 0.10 1.00 2.00 17.00-‐19.00 -‐ 8.00-‐10.00

1.4301 X5CrNi18-‐10 304 S30400 0.07 1.00 2.00 17.50-‐19.50 -‐ 8.00-‐10.50

1.4306 X2CrNi19-‐11 304L S30403 0.03 1.00 2.00 18.00-‐20.00 -‐ 10.00-‐12.00

1.4948 X6CrNi18-‐10/X6CrNi18-‐11 304H S30409 0.04-‐0.08 1.00 2.00 17.00-‐19.00 -‐ 8.00-‐11.00

1.4311 XCrNiN18-‐10 304LN S30453 0.03 1.00 2.00 17.50-‐19.50 -‐ 8.50-‐11.50

1.4828 X15CrNiSi20-‐12 309 S30900 0.20 1.50-‐2.00 2.00 19.00-‐21.00 -‐ 11.00-‐13.00

1.4833 X12CrNi23-‐13 309S S30908 0.15 1.00 2.00 22.00-‐24.00 -‐ 12.00-‐14.00

1.4841 X15CrNiSi25-‐20 310 S31000 0.25 1.50 2.00 24.00-‐26.00 ≤ 0.75 19.20-‐22.00

1.4845 X12CrNI25-‐21 310H S31009 0.040-‐0.10 0.75 2.00 24.00-‐26.00 -‐ 19.00-‐22.00

1.4335 X1CrNi25-‐21 310L S30600 0.015 0.30 2.00 25.00 ≤ 0.30 20.5

1.4842 X12CrNi25-‐20 310S S31008 0.08 1.50 2.00 24.00-‐26.00 ≤ 0.75 19.20-‐22.00

1.4841 X15CrNiSi25-‐21 314 S31400 0.20 1.50-‐2.00 2.00 24.00-‐26.00 -‐ 19.00-‐22.00

1.4401 X5CrNiMo17-‐12-‐2 316 S31600 0.08 0.75 2.00 16.00-‐18.00 2.00-‐3.00 10.00-‐14.00

1.4404 X2CrNiMo17-‐13-‐2 316L S31603 0.03 0.75 2.00 16.00-‐18.00 2.00-‐3.00 10.00-‐14.00

1.4919 X5CrNiMo17-‐12 316H S31609 0.04-‐0.10 0.75 0.04-‐1.10 16.00-‐18.00 3.00-‐3.00 10.00-‐14.00

1.4429 X2CrNiMoN17-‐13-‐3 316LN S31653 0.03 0.75 2.00 17.00-‐19.00 2.00-‐3.00 13.00-‐15.00

1.4571 X6CrNiMoTi17-‐12-‐2 316Ti S31635 0.08 1.00 2.00 16.50-‐18.50 2.00-‐2.50 10.50-‐13.50

1.4438 X2CrNiMo18-‐15-‐4 317L S31703 0.03 1.00 2.00 17.50-‐19.50 3.00-‐4.00 13.00-‐16.00

1.4439 X2CrNiMoN17-‐13-‐5 317LMN S31726 0.03 1.00 2.00 16.50-‐18.50 4.00-‐5.00 12.50-‐14.50

1.4541 X6CrNiTi18-‐10 321 S32100 0.08 1.00 2.00 17.00-‐19.00 -‐ 9.00-‐12.00

1.4941 X6CrNiTiB18-‐10 321H S32109 0.04-‐0.08 1.00 2.00 17.00-‐19.00 -‐ 9.00-‐12.00

1.4550 X6CrNiNb18-‐10 347 S34700 0.08 1.00 2.00 17.00-‐19.00 -‐ 9.00-‐12.00

1.4961 X8CrNiNb16-‐13 347H S34709 0.04-‐0.10 0.30-‐0.60 1.50 15.00-‐17.00 -‐ 12.00-‐14.00

1.4002 X6CrAl13 405 S40500 0.08 1.00 1.00 12.00-‐14.00 -‐ -‐

1.4016 X6Cr17 430 S43000 0.08 1.00 1.00 16.00-‐18.00 -‐ -‐

1.4511 X3CrNb17 430Nb S43040 0.05 1.00 1.00 16.00-‐18.00 -‐ -‐

1.4510 X3CrTi17 439 S43035 0.05 1.00 1.00 16.00-‐18.00 -‐ -‐

1.4521 X2CrMoTi18-‐2 444 S44400 0.03 1.00 1.00 17.00-‐20.00 1.80-‐2.50 -‐

1.4539 X1NiCrMoCu25-‐20-‐5 904L N08904 0.02 0.70 2.00 19.00-‐21.00 4.00-‐5.00 24.00-‐26.00

1.4547 X1CrNiMoN20-‐18-‐7 254 SMO S31254 0.02 0.70 1.00 19.50-‐20.50 6.00-‐7.00 17.50-‐18.50

1.4361 X1CrNiSi18-‐15-‐4 Alloy 1815 S30600 0.15 3.70-‐4.50 2.00 16.50-‐18.50 ≤ 0.20 14.00-‐16.00

1.4362 X2CrNiN23-‐4 Alloy 2304 S32304 0.03 1.00 2.00 22.00-‐24.00 0.10-‐0.60 3.50-‐5.50

1.4507 X2CrNiMoCuN25-‐6-‐3 Alloy 255 S32550 0.03 0.7 2 24.00-‐26.00 3.00-‐4.00 6.00-‐8.00

1.4876 X10NiCrAlTi32-‐21 Alloy 800 N08800 0.12 1.00 2.00 19.00-‐23.00 -‐ 30.00-‐34.00

1.4462 X2CrNiMoN22-‐5-‐3 F51/F60 S31803/S32205 0.03 1.00 2.00 21.00-‐23.00 2.50-‐3.50 4.50-‐6.50

1.4410 X2CrNiMoN25-‐7-‐4 F53 S32750 0.03 1.00 2.00 24.00-‐26.00 3.00-‐4.50 6.00-‐8.00

1.4501 X2CrNiMoCuWN25-‐7-‐4 F55 S32760 0.03 1.00 1.00 24.00-‐26.00 3.00-‐4.00 6.00-‐8.00

1.4162 X2CrMnNiN22-‐5-‐2 LDX 2101 S32101 0.04 1.00 4.00-‐6.00 21.00-‐23.00 1.35-‐1.70 0.10-‐0.80

(please note these figures are approximate)UNS

Chemical Composi;on Material

No.DIN AISI

Technical InformationChemical Composition

The Amodil GroupForestPark,CleoburyMortimer

Kidderminster,WorcestershireDY149BDTel: 01299 270771 Fax: 01299 [email protected]

Documents

The Amodil Group · Dia15.40 • 304L 303 304L 303 Amodil Supplies Ltd Olarra UK Ltd The Amodil Group Amodil Supplies Ltd Olarra UK Ltd The Amodil Group Stock Range Stainless Steel