TETRA DRILLING RIG TD 1500

MAIN HOIST

Single Rope Lifting Force 12.000 kg REXROTH 80 cc.

2020

TETRA DRILLING RIG TD 1500

www.tetramakine.com

TETRA

TETRA MAKİNE 2020

MAIN HOIST

Single Rope Lifting Speed 14 m/min.

Steel Cable Diameter 25 m.*16 mm

WIRELINE

Capacity 1.500 m. with 6 mm. Line (4,6 mm 2.000 m)

Line Pull

Bare Drum Full

Full Drum Full

Line Speed

Bare Drum 250 m/min EATON 400 cc.

Full Drum 250 m/min EATON 400 cc.

MAST SYSTEM

Feeding Length 3,5 m 11.4 ft

Feeding Speed Speed control panel

Feeding Force 8.000 kg –15.700 kg

Rod Pull Capacity 6 м 19,7 ft

ENGINE

Brand FORD ECOTORQ

Power 235 kW 320 Hp

Speed 1800 RPM (adjustable)

Type Dizel

Cooling Water cooling and Intercool

DRILLING CAPACITY

Drilling Rod Diameter BWL NWL HWL PWL

Final Hole Diameter (mm) 60 75,7 96 122,6

Depth (m) 2000 1500 1000 600

Depth (ft)

www.tetramakine.com

TETRA

TETRA MAKİNE 2020

HYDRAULIC SYSTEM

First Pump (KAWASAKI 112 cc) 320-350 bar 1000 RPM/min.

Second Pump (KAWASAKI 45 cc) 320-350 bar 1000 RPM/min.

Back up Pump (KAWASAKI 28 cc) 320-350 bar 1000 RPM/min.

Hydraulic Oil Cooler Air

DRILL CHUCK JAW

Type Hydraulic

Max. Inside Diameter 117 mm 4.61 lb

Holding Capacity 19.000 kg 41.887 ft

ROD HOLDER OPTIONAL

Type Double hydraulic piston

Max. Inside Diameter 170 mm 6.69 lb

Holding Capacity 20.000 kg 44.092 ft

MOVEMENT crawler

LEG MEMBERS plunger-type 4 pieces

WEIGHT 11.000 kg /24.250 ft

DIMENSIONS

Mast Stroke Length Main Hoist Hight Mast Length Mast Sliding Stroke

3.500 mm / 137 in 5.510 mm / 216 in 9.300 mm / 366 in 2.650 mm / 104 in

TORQUE AND SPEED

GEAR TRANSFORMATION MAX SPEED (RPM) MAX TPRQUE (NM)

1-я 1:6,27 144/199 5322/3826

2 -я 1:3,12 288/400 2648/1898

3 -я 1:1,75 514/714 1486/1068

4 -я 1:1 900/1250 849/610

The size of the hole corresponds to the diameter of the PQ tie-rod body, equipped with a case spring and

rotating proportional control. The self-lubricated mechanical drive 4-speed rotor is operated through the

hydraulic motor with alternating load. Data presented above is based on the assumption of operating a diesel

engine with a constant speed of 1600 RPM.

www.tetramakine.com

TETRA

TETRA MAKİNE 2020

STANDART EQUIPMENT

Two-section telescopic drilling mast

Mast pulley

Security barriers

High torque gear

4 pieces hydraulic plunger-type leg members

Triplex mud pump

Fuel tank 250 lt (66 gal)

Oil tank 400 lt (105,6 gal)

Fuel filter

Tachometer

OPTIONAL EQUIPMENTS

Water flow meter

Hydraulic mud-pump (2nd pump for above 1000 mt.)

Max. flow of mud-pump 135 lt/min

Max. pressure of mud-pump 60 bar

Hydraulic mud mixer

Rod holder

All data are approximate and change depending on the model of equipment and accessories

used.

All mechanical parts are manufactured by our company and available in stock.

Depending on the type of foundation is recommended Usage of additional mud-pump for

drilling of deeper holes.

Spare parts of Far Eastern manufacture are not used in the production of our equipment.

Service hoist is produced by the American company BRADEN.

Main pump systems are Japanese KAWASAKI brand.

Rotary engine is REXROTH brand.

Cooling system is Italian OESSE brand which has a flow of 200 lt/min.and a capacity of 40000

Kcal/h.

Filters are Italian UKI brand.

Controllers are Italian AMKA and Switzerlander BREVINI brand.

Movement system is Italian TRACKONE brand which has a carrying capacity of 12.000 kg. on

60% slope.

Warranty for 1 year.

www.tetramakine.com

TETRA

TETRA MAKİNE 2020

www.tetramakine.com

TETRA

TETRA MAKİNE 2020

Adres : Serhat OSB 1202/1 (eski 31) sokak No:29 Ostim – ANKARA Turkey

Telefon : +90 (312) 354 07 84 (Factory)

+90 (532) 337 18 49 (Eng-Rus)

Faks : +90 (312) 911 24 32 (International)

Mail : info@tetramakine.com sales@tetramakine.com (eng) rus@tetramakine.com (rus)