Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan(Release Version 3.0.0.0.78)First Published: September 03, 2015
Last Modified: September 08, 2015
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
Text Part Number:
© 2015 Cisco Systems, Inc. All rights reserved.
C O N T E N T S
C H A P T E R 1 Overview 1
Prime Infrastructure test 1
C H A P T E R 2 Test Topology and Environment Matrix 7
Test Topology 8
Environment Matrix 8
What's New ? 10
Open Caveats 10
C H A P T E R 3 New Features - Test Summary 11
Monitoring the High Availability (HA) standby WLC 11
Guest Anchor Priority 13
Cisco WLC integration with Lync SDN API 14
AVC for Flex Connect Locally switched Access Points 17
Interference Awareness 18
C H A P T E R 4 Regression Features - Test Summary 21
SR 21
Adhoc Test cases 21
Related Documentation 23
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) iii
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)iv
Contents
C H A P T E R 1Overview
• Prime Infrastructure test , page 1
Prime Infrastructure testCisco Prime Infrastructure test , an integral part of the enterprise wireless solution, is a program that validatesvarious CiscoWireless Products and Features. This is achieved by testing the latest versions of Cisco wirelessproducts
Cisco Prime Infrastructure for Japan , in turn is an add-on testing at the solution level, where the requirementsgathered are specific to Japanese usage and market. The requirements are derived based on the following:
• New features in PI 3.0
• Customer found defects in selected wireless products
• High priority scenarios and basic regression features
• Inputs from Cisco SEs/ TAC
The test execution is carried out on selected CiscoWireless LAN products, which affect the Japanese segmentthat are prioritized by Cisco Japan team.
The following products are covered in the test execution:
• Cisco Wireless LAN Controller 5508
• Cisco Wireless LAN Controller 2500
• Cisco Wireless LAN Flex Controller 7500
• Cisco Wireless LAN Flex Controller 8500
• Cisco Wireless LAN Controller 5520
•WiSM2 Controller
• Virtual Controller
• Access Point 3500
• Access Point 1700
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 1
• Access Point 3600
• Access Point 3700
• Access Point 2600
• Access Point 1530
• Access Point 1550
• Access Point 1600
• Access Point 2700
• Access Point 1570
• Access Point 702
• Cisco OEAP 602
• Cisco Prime Network Control System
• Cisco Prime Infrastructure
Acronyms
DescriptionAcronym
Authentication Authorization and AccountingAAA
Access Control ListACL
Access Control ServerACS
Authentication Key ManagementAKM
Access PointAP
Application Programming InterfaceAPI
Application Visibility and Control.AVC
Bridge Group NetworkBGN
Bluetooth Low EnergyBLE
Bring Your Own DeviceBYOD
Central AuthenticationCA
Call Admissions ControlCAC
Control and Provisioning of Wireless Access PointCAPWAP
Cisco Centralized Key ManagementCCKM
Channel Change NotificationCCN
Cisco Compatible ExtensionsCCX
Cisco Discovery ProtocolCDP
Cisco Key Integrity ProtocolCKIP
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)2
OverviewPrime Infrastructure test
DescriptionAcronym
Connected Mobile ExperienceCMX
Cisco Vector Beam FormingCVBF
Central Web AuthenticationCWA
Dynamic Channel AssignmentDCA
Demilitarized ZoneDMZ
Domain Name SystemDNS
Delivery Traffic Indication MapDTIM
Differentiated Services Code PointDSCP
Datagram Transport Layer SecurityDTLS
Extensible Authentication ProtocolEAP
End User Licence AgreementEULA
Flex Local AuthenticationFLA
Flex Local SwitchingFLS
Fast TransitionFT
File Transfer ProtocolFTP
Firm WareFW
High AvailabilityHA
Hybrid Remote Edge Access PointH-REAP
Internetwork Operating SystemIOS
Identity Service EngineISE
Link AggregationLAG
Lightweight Extensible Authentication ProtocolLEAP
Location Specific ServicesLSS
Lightweight Access Point ProtocolLWAPP
Mesh Access PointMAP
Modulation Coding SchemeMCS
Management Frame ProtectionMFP
multicast Domain Name SystemmDNS
Message Integrity CheckMIC
Mobility Service EngineMSE
Maximum Transmission UnitMTU
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 3
OverviewPrime Infrastructure test
DescriptionAcronym
Network Admission ControlNAC
Network Address TranslationNAT
Network Based Application RecognitionNBAR
Network Control SystemNCS
Next Generation Wiring closetNGWC
Network Mobility Services ProtocolNMSP
Office Extended Access PointOEAP
Protected Extensible Authentication ProtocolPEAP
Policy Enforcement ModulePEM
Prime InfrastructurePI
Protected Management FramePMF
Point of InterestPOI
Point-to-Point Protocol over EthernetPPPoE
Pre-shared KeyPSK
Quality of serviceQOS
Remote Authentication Dial-In User ServiceRADIUS
Root Access PointRAP
Redundancy PortRP
Radio Resource ManagementRRM
Software Defined NetworkingSDN
Simple Object Access ProtocolSOAP
Secure File Transfer ProtocolSFTP
Simple Network Management ProtocolSNMP
Spatial StreamSS
Service Set IdentifierSSID
Single Sign OnSSO
Stateful Switch OverSSO
Terminal Access Controller Access Control SystemTACACS
Transmission Control ProtocolTCP
Trivial File Transfer ProtocolTFTP
Transport Layer SecurityTLS
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)4
OverviewPrime Infrastructure test
DescriptionAcronym
User Datagram ProtocolUDP
Virtual Wireless LAN ControllervWLC
Virtual port channelVPC
Virtual Private NetworkVPN
Wired Equivalent PrivacyWEP
Workgroup BridgeWGB
Wireless Intrusion Prevention SystemwIPS
Wireless Service ModuleWiSM
Wireless LANWLAN
Wireless LAN ControllerWLC
Wi-Fi Protected AccessWPA
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 5
OverviewPrime Infrastructure test
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)6
OverviewPrime Infrastructure test
C H A P T E R 2Test Topology and Environment Matrix
• Test Topology, page 8
• Environment Matrix, page 8
• What's New ?, page 10
• Open Caveats, page 10
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 7
Test TopologyFigure 1: Topology In Use
Environment MatrixVersionComponentCategory
8.1.102.0Wireless LAN controller 5508Controller
8.1.102.0Flex Controller 7500
8.1.102.0Wireless LAN Controller 2500
8.1.102.0Wireless LAN Controller 8500
8.1.102.0Wireless LAN Controller 5520
8.1.102.0WiSM2
8.1.102.0Virtual controller
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)8
Test Topology and Environment MatrixTest Topology
VersionComponentCategory
3.0.0.0.78PI (Physical, VM)Application
11.0(1)Cisco Jabber for Windows
11.0(1)Cisco Jabber for iPhone
SDN API ( 2.0)MS Lync Server 2013
15.0MS Lync Client 2013
15.3Cisco AP 3500Access Point
15.3Cisco AP 3600
15.3Cisco AP 3700
15.3Cisco AP 2600
15.3Cisco AP 2700
15.3Cisco AP 1600
15.3Cisco AP 1700
15.3Cisco OEAP 602
15.3Cisco AP 702I
15.3Cisco AP 702W
15.3Cisco AP 1550
15.3Cisco AP 1530
15.3Cisco AP 1570
15.0(2)SE2Cisco 3750V2 switchSwitch
15.1(1)SY1Cisco Cat 6509-E
15.13.0.25300, 6300 AGNChipset
7.7Airport Extreme
17.16.1.27260 AGN
Windows 7 EnterpriseOperating System(JOS)Client
Windows 8.1 Enterprise
Mac OS 10.10.4Apple Mac Book Pro (JP Locale)
iOS 8.1.2(12B440)iPhone 5(JP Locale)
iOS 8.1.2(12B440)iPhone 6(JP Locale)
Android 4.3Samsung Galaxy S-II and S4
Windows 2008R2EnterpriseADActive Directory
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 9
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentCategory
10,11IEBrowsers
11.5Opera
35.0Mozilla Firefox
7.1.3Safari
37,40Chrome
What's New ?• Monitoring the High Availability (HA) standby WLC
• Guest Anchor priority
• Cisco WLC integration with Lync SDN API
• AVC for Flex Connect Locally switched Access Points
• Interference Awareness
Open CaveatsDefect TitleDefect ID
Unable to get into scheduled audit report or latest config audit pageCSCuv54613
Unknown Exception while setting the mobility anchor for WLAN proCSCuv53907
Not able to configure foreign anchor for wlan profileCSCuv79003
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)10
Test Topology and Environment MatrixWhat's New ?
C H A P T E R 3New Features - Test Summary
• Monitoring the High Availability (HA) standby WLC, page 11
• Guest Anchor Priority, page 13
• Cisco WLC integration with Lync SDN API, page 14
• AVC for Flex Connect Locally switched Access Points, page 17
• Interference Awareness, page 18
Monitoring the High Availability (HA) standby WLCDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherManagement GatewayFailover support inRedundancyconfiguration for 8.1.xController successful
Check the ManagementGateway Failoversupport in RedundancyGlobal configuration for8.1 Controller
WLJPI3.0_HA_MON_1
PassedTo Verify whether theKeep Alive Timer underRedundancy Globalconfiguration for 8.1.xController is successful
Keep Alive Timer underRedundancy Globalconfiguration
WLJPI3.0_HA_MON_2
PassedTo Verify whether KeepAlive Retries underRedundancy Globalconfiguration for 8.1.xController is successful
Keep Alive Retriesunder RedundancyGlobal configuration
WLJPI3.0_HA_MON_3
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 11
PassedTo Verify whether thePeer Search Timerconfiguration underRedundancy Globalconfiguration for 8.1.xController is successful
Peer Search Timer underRedundancy Globalconfiguration
WLJPI3.0_HA_MON_4
PassedTo verify whetherManagement GatewayFailover support inRedundancy Globalconfiguration forcontrollers running prior8.1.x image validatedsuccessfully
Management GatewayFailover support inRedundancy Globalconfiguration forcontrollers running prior8.1.x image
WLJPI3.0_HA_MON_5
PassedTo Validate Keep AliveTimer configurationunder RedundancyGlobal configuration
Keep Alive Timerconfiguration underRedundancy Globalconfiguration
WLJPI3.0_HA_MON_6
PassedTo Validate Keep AliveRetries configurationunder RedundancyGlobal configuration
Keep Alive Retriesconfiguration underRedundancy Globalconfiguration
WLJPI3.0_HA_MON_7
PassedTo Validate whether thePeer Search Timerconfiguration underRedundancy Globalconfiguration issuccessful
Peer Search Timerconfiguration underRedundancy Globalconfiguration
WLJPI3.0_HA_MON_8
PassedTo Verify whether PeerDevice memoryUtilization underMonitorDevice SystemSummaryfor a paired controller isdisplayed correctly
Peer Device memoryUtilization underMonitor Device SystemSummary of aredundancy pairedcontroller
WLJPI3.0_HA_MON_11
PassedTo Verify whetherMonitor RedundancySummary for 8.1Controller & above fornew reachability latencyfields is displayedcorrectly
Monitor RedundancySummary for 8.1Controller & above fornew reachability latencyfields
WLJPI3.0_HA_MON_12
PassedTo Verify whetherMonitor RedundancySummary for Bulk SyncStatus for 8.1 controller& above is displayed
monitor RedundancySummary for BulkStatus for 8.1 controller& above
WLJPI3.0_HA_MON_13
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)12
New Features - Test SummaryMonitoring the High Availability (HA) standby WLC
PassedTo Verify whether theController pair upgradefrom earlier image to 8.1& check the redundancyparameters
Controller pair upgradefrom earlier image to 8.1& check the redundancyparameters
WLJPI3.0_HA_MON_15
PassedTo Verify whether thenon-root user logged intoNon-root VD access newredundancy parameters& monitor devicesummary page for peerdevice data along withAlarms seen in thenon-root Virtual domain
Non-root user loggedinto Non-root VD accessnew redundancyparameters & monitordevice summary page forpeer device data alongwith Alarms
WLJPI3.0_HA_MON_16
PassedTo Verify whether theOnline Help for newRedundancy parametersin both Config&monitorpages displayedsuccessfully
Online Help for newRedundancy parametersin both Config &monitor pages
WLJPI3.0_HA_MON_17
Guest Anchor PriorityDefectStatusDescriptionTitleLogical ID
PassedTo verify the clientconnectivity with guestanchor priority
Guest anchor -clientconnectivity (Internal)
WLJPI3.0_Anchor_01
PassedTo verify the mobility anchorsettings
Mobility Anchorsetting for WLANprofile
WLJPI3.0_Anchor_02
PassedTo verify the mobility anchorpriority
Setting the mobilityanchor priority
WLJPI3.0_Anchor_03
CSCuv79003FailedTo verify the Foreign anchorsettings
Foreign anchor onwlan profile
WLJPI3.0_Anchor_04
PassedTo verify the guest anchorpriority when wlan profile isenabled
Removing the wlanconfiguration withanchor settings
WLJPI3.0_Anchor_05
PassedTo verify the single wlan withmore than one anchor
Mobility Anchorsetting for WLANprofile-2500
WLJPI3.0_Anchor_06
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 13
New Features - Test SummaryGuest Anchor Priority
PassedTo verify the guest priorityconfiguration whenWLAN isenabled
Guest Anchor priorityconfiguration when itis enabled
WLJPI3.0_Anchor_07
PassedTo verify the more than oneanchor wlc s
More than one anchorpriority setting forsingle wlan
WLJPI3.0_Anchor_08
Passedto verify the guest anchorconfiguration when AP inFlex Connect Mode
Guest anchor priorityconfiguration whenthe AP is in flexconnect mode
WLJPI3.0_Anchor_09
PassedTo verify the control and datapath event in PI
Control and data pathevent in PI
WLJPI3.0_Anchor_10
PassedTo verify the configurationsync from wlc to PI
Setting the mobilityanchor priority fromwlc
WLJPI3.0_Anchor_11
PassedTo verify the mobility anchorwith WEP
Mobility anchor withL2 security as WEP
WLJPI3.0_Anchor_12
PassedTo verify the mobility anchorsettings in PI monitor
Mobility anchorpriority settings inDevice details page
WLJPI3.0_Anchor_13
PassedTo verify the mobility anchorsettings for multiple wlcsfrom PI
Setting mobilityanchor for multiplewlc from PI
WLJPI3.0_Anchor_14
PassedTo verify the guest anchorpriority CLI commands sync
Guest Anchor CLIcommands wlc to PI
WLJPI3.0_Anchor_15
Cisco WLC integration with Lync SDN APIDefect IDStatusDescriptionTitleLogical ID
PassedTo check whether ActiveLync Audio callsbetween Windows 7wired andwireless clientsare shown or not in PI
Lync voice callestablishmentbetween windows 7wireless and wiredclient
WLJPI3.0_Lync_SDN_1
PassedTo check whether ActiveLync Audio callsbetween wired andSamsung S4 wirelessclients are shown or notin PI
Lync voice callestablishmentbetween SamsungS4 wireless andwired client
WLJPI3.0_Lync_SDN_2
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)14
New Features - Test SummaryCisco WLC integration with Lync SDN API
PassedTo check whether ActiveLync Audio callsbetweenwired andAppleiPhone clients are shownor not in PI
Lync voice callestablishmentbetween AppleiPhone and wiredclient
WLJPI3.0_Lync_SDN_3
PassedTo check whether ActiveLync video calls betweenWindows 7 Wired andWireless clients areshown or not in PI
Lync video callestablishmentbetweenWindows 7wireless and wiredclient
WLJPI3.0_Lync_SDN_4
PassedTo check whether ActiveLync video calls betweenWired and Samsung S4mobile clients are shownor not in PI
Lync video callestablishmentbetween SamsungS4mobile andwiredclient
WLJPI3.0_Lync_SDN_5
PassedTo check whether ActiveLync video calls betweenWired and Apple iPhoneclients are shown or notin PI
Lync video callestablishmentbetween AppleiPhone and wiredclient
WLJPI3.0_Lync_SDN_6
PassedTo check whether Activedesktop sharing betweenWired and Wirelessclients are shown or notin PI
Lync desktopsharing betweenwireless and wiredclient
WLJPI3.0_Lync_SDN_7
PassedTo check whether ActiveLync Audio callsbetween two windows 7wireless clients areshown or not in PI
Lync voice callestablishmentbetween twoWindows 7 wirelessclients
WLJPI3.0_Lync_SDN_8
PassedTo check whether ActiveLync Audio callsbetween two Samsung S4mobile clients are shownor not in PI
Lync voice callestablishmentbetween twoSamsung S4 mobileclients
WLJPI3.0_Lync_SDN_9
PassedTo check whether ActiveLync Audio callsbetween two AppleiPhone mobile clients areshown or not in PI
Lync voice callestablishmentbetween two AppleiPhone clients
WLJPI3.0_Lync_SDN_10
PassedTo check whether ActiveLync video calls betweentwo Windows 7 wirelessclients are shown or notin PI
Lync video callestablishmentbetween twoWindows 7 wirelessclients
WLJPI3.0_Lync_SDN_11
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 15
New Features - Test SummaryCisco WLC integration with Lync SDN API
PassedTo check whether ActiveLync video calls betweentwo Samsung S4 mobileclients are shown or notin PI
Lync video callestablishmentbetween twoSamsung S4 mobileclients
WLJPI3.0_Lync_SDN_12
PassedTo check whether ActiveLync video calls betweentwo Apple iPhone clientsare shown or not in PI
Lync video callestablishmentbetween two AppleiPhone clients
WLJPI3.0_Lync_SDN_13
PassedTo check whether Activedesktop sharing betweentwo wireless clients areshown or not in PI
Lync desktopsharing between twowireless clients
WLJPI3.0_Lync_SDN_14
PassedTo check whether LyncCalls between wired andwireless clients areshown or not in PI afterroaming from one WLCto another
Monitoring LyncCalls betweenWiredandWireless Clientsafter client roaminginside mobilitygroup
WLJPI3.0_Lync_SDN_15
PassedTo check whether LyncCalls between twowireless clients areshown or not in PI afterroaming from one WLCto another
Monitoring LyncCalls between twoWireless Clientsafter client roaminginside mobilitygroup
WLJPI3.0_Lync_SDN_16
PassedTo check whether LyncCalls between Clientscould bemonitored or notfrom PI after client roamsfrom one ap to another insame WLC
Monitoring LyncCalls betweenClients afterroaming from oneap to another insame WLC
WLJPI3.0_Lync_SDN_17
PassedTo check whether LyncCalls between wired andwireless clients areshown or not in PI afterstandby WLC becomesactive
Monitoring LyncCalls betweenWiredandWireless Clientsafter HA failover
WLJPI3.0_Lync_SDN_18
PassedTo check whether LyncCalls between twowireless clients areshown or not in PI afterstandby WLC becomesactive
Monitoring LyncCalls between twoWireless Clientsafter HA failover
WLJPI3.0_Lync_SDN_19
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)16
New Features - Test SummaryCisco WLC integration with Lync SDN API
PassedTo check whether AVCStatistics reflects in PI forcalls between windows 7wireless and wired Lyncclients
Monitoring AVCstatistics for Lynccalls betweenWindows 7 wirelessand wired clientfrom PI
WLJPI3.0_Lync_SDN_20
PassedTo check whether AVCStatistics reflects in PI forcalls between SamsungS4 mobile and wiredLync clients
Monitoring AVCstatistics for Lynccalls betweenSamsung S4 mobileand wired clientfrom PI
WLJPI3.0_Lync_SDN_21
PassedTo check whether AVCStatistics reflects in PI forcalls between AppleiPhone and wired Lyncclients
Monitoring AVCstatistics for Lynccalls between AppleiPhone and wiredclient from PI
WLJPI3.0_Lync_SDN_22
PassedTo check whether AVCStatistics reflects in PI forcalls between twowindows 7wireless Lyncclients
Monitoring AVCstatistics for Lynccalls between twoWindows 7 wirelessclient from PI
WLJPI3.0_Lync_SDN_23
PassedTo check whether AVCStatistics reflects in PI forcalls between twoSamsung S4mobile Lyncclients
Monitoring AVCstatistics for Lynccalls between twoSamsung S4 mobileclient from PI
WLJPI3.0_Lync_SDN_24
PassedTo check whether AVCStatistics reflects in PI forcalls between two AppleiPhone Lync clients
Monitoring AVCstatistics for Lynccalls between twoApple iPhone clientfrom PI
WLJPI3.0_Lync_SDN_25
AVC for Flex Connect Locally switched Access PointsDefect IDStatusDescriptionTitleLogical ID
PassedTo verify the Flex AVCprofile Drop
Flex Connect AVCprofileconfiguration -Drop
WLJPI3.0_Flex_AvC_01
PassedTo verify the Flex AVCprofile for Mark
Flex Connect AVCprofileconfiguration-Mark
WLJPI3.0_Flex_AvC_02
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 17
New Features - Test SummaryAVC for Flex Connect Locally switched Access Points
PassedTo verify the Flex AVCprofile deletion
Delete FlexConnect AVCProfile -5508
WLJPI3.0_Flex_AvC_03
PassedTo verify the Flex AVCrule
Delete the FlexConnect the AVCrule
WLJPI3.0_Flex_AvC_04
PassedTo verify the Flex AVCconfiguration with FlexGroup
Flex AVC withFlex Group
WLJPI3.0_Flex_AvC_05
PassedTo verify the AVCconfiguration sync fromWLC to PI
Flex AVCconfiguration syncfrom WLC to PI
WLJPI3.0_Flex_AvC_06
PassedTo verify the Client detailsin PI monitor page
Client details in PImonitor page
WLJPI3.0_Flex_AvC_07
PassedTo verify the clientconnectivity with FlexAVC profile
Client connectivitywith Flex AVCprofile
WLJPI3.0_Flex_AvC_08
PassedClient connectivity withLocal switching mode
Client connectivitywith Localswitching mode
WLJPI3.0_Flex_AvC_09
Interference AwarenessDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whether Eventdriven RRM for Roguecontribution support in802.11a/n DCA configurationfor 8.1 Controller
Event driven RRMfor Roguecontribution supportin 802.11a/n
WLJPI3.0_INT_AWR_1
PassedTo verify whether the Eventdriven RRM for Roguecontribution support in802.11b/g/n DCAconfiguration for 8.1Controller
Event driven RRMfor Roguecontribution supportin 802.11b/g/n
WLJPI3.0_INT_AWR_2
PassedTo verify whether the Eventdriven RRM for Roguecontribution support in802.11a/n DCA Templates for8.1 Controller
Apply Template forEvent driven RRMfor Roguecontribution supportin 802.11a/n
WLJPI3.0_INT_AWR_3
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)18
New Features - Test SummaryInterference Awareness
PassedTo Verify whether the Eventdriven RRM for Roguecontribution support in802.11b/g/n DCA Templatesfor 8.1 Controller
Apply Template forEvent driven RRMfor Roguecontribution supportin 802.11b/g/n
WLJPI3.0_INT_AWR_4
PassedTo verify cleanair -WiFiinterference and trap supportin 802.11a/n Templates for 8.1Controller
Cleanair -WiFiinterference and trapsupport in 802.11a/nTemplates for 8.1Controller
WLJPI3.0_INT_AWR_5
PassedTo verify cleanair -WiFiinterference and trap supportin 802.11b/g/n Templates for8.1 Controller
Cleanair -WiFiinterference and trapsupport in802.11b/g/nTemplates for 8.1Controller
WLJPI3.0_INT_AWR_6
PassedTo verify cleanair -WiFiinterference and trap supportin 802.11a/n configuration for8.1 Controller
Cleanair -WiFiinterference and trapsupportconfiguration in802.11a/n for 8.1Controller from PI
WLJPI3.0_INT_AWR_7
PassedTo verify cleanair -WiFiinterference and trap supportin 802.11b/g/n configurationfor 8.1 Controller
Cleanair -WiFiinterference and trapsupportconfiguration in802.11b/g/n for 8.1Controller from PI
WLJPI3.0_INT_AWR_8
PassedTo verify whether the templatebased Audit on Roguecontribution and duty cycle in802.11a/n and 802.11b/g/nDCA configuration
Template basedAudit on Roguecontribution andduty cycle in802.11a/n DCA and802.11b/g/n
WLJPI3.0_INT_AWR_10
PassedTo verify whether the RogueContribution and cleanairWiFi interference works inVirtual domain
Rogue Contributionand cleanair WiFiinterference
WLJPI3.0_INT_AWR_12
PassedTo check whether the RRMmonitor show mismatch inconfiguration in leader andslaves controller.
RF Groups withConfigurationMismatches
WLJPI3.0_INT_AWR_13
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 19
New Features - Test SummaryInterference Awareness
PassedTo check non-root user accessto new Rogue Contribution/WiFi Interferer parameters inboth Config & RRM monitorpages
Non-root user accessto new RogueContribution /WiFiInterferer parameters
WLJPI3.0_INT_AWR_14
PassedTo check the "Channel ChangeReason" because ofInterference is reflected in theRRM page
Create channelchange because ofInterference andnote down theresults in last 24hours /7 days
WLJPI3.0_INT_AWR_16
PassedTo verify whether the"Channel Change Reason"because of noise is reflected inthe RRM page
Create channelchange because ofnoise and note downthe results in last 24hours /7 days
WLJPI3.0_INT_AWR_17
PassedTo check whether the RRMstatistics shows the TotalConfiguration Mismatchesaccurately
Total ConfigurationMismatchesverification
WLJPI3.0_INT_AWR_18
PassedTo check the Config auditreport for Roguecontribution/duty cycle andWiFi interference
Audit report forRoguecontribution/dutycycle
WLJPI3.0_INT_AWR_19
PassedTo verify whether the RRMstatistics shows the AP's atmaximum power valuecorrectly and the link leads toRRM > APs operating atmaximum power > Radio802.11a/n / 802.11b/g/n page
Percentage of AP'sat maximum powerlink verification
WLJPI3.0_INT_AWR_20
PassedTo verify the number of RFGroups under RRM statisticsis reflected properly
Number of RFGroups under RRMstatistics verification
WLJPI3.0_INT_AWR_21
PassedTo verify the RRM statisticsshows Total Channel Changesaccurately
Total ChannelChanges verification
WLJPI3.0_INT_AWR_22
PassedTo check the Tx Power andChannel Report for itsaccuracy when rogue detected
Check Tx Power andChannel Report
WLJPI3.0_INT_AWR_23
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)20
New Features - Test SummaryInterference Awareness
C H A P T E R 4Regression Features - Test Summary
• SR, page 21
• Adhoc Test cases, page 21
• Related Documentation, page 23
SRDefectsStatusDescriptionTitleLogical ID
PassedTo verify whether the NTP timezone is properly synchronized anddisplays the time in PI 3.0
Check NTP time zoneof WLC in PI
WLJPI3.0_SR_1
PassedTo verify whether the NTP timezone is properly synchronized anddisplays the time in PI 3.0 forvirtual controller
Check NTP time zoneof vWLC in PI
WLJPI3.0_SR_2
Adhoc Test casesDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whethercall stacks aredisplayed in Lyncsummary pane ornot
Lync SummaryWLJPI3.0_Adhoc_1
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 21
PassedTo verify whetherLync conversationspane generatescallee and callerinformation or not
Lync ConversationsWLJPI3.0_Adhoc_2
PassedTo verify whetherthe time filter worksproperly or not inLync monitoring
Time Filter in Lyncsummary
WLJPI3.0_Adhoc_3
PassedTo verify whetherfilter works in theLync conversationpane
Filter in Lyncconversation
WLJPI3.0_Adhoc_4
CSCuv49474PassedTo verify whetherLync Server configdone in WLC'swireless tab isgetting Sync with PIor not
WLC Lync Configin PI
WLJPI3.0_Adhoc_5
CSCuv64844PassedTo verify whetherClient connectiontype is displayedproperly or not
Lync Conversationsin PI
WLJPI3.0_Adhoc_6
CSCuv54613FailedTo verify whetherthe availableredirect option tolatest config auditpage fromscheduled page
Unable to get intoscheduled auditreport or latestconfig audit page
WLJPI3.0_Adhoc_8
CSCuv64637PassedTo verify whetherthe report categoryis available when dosave and export onlatest config audit
Save and export onlatest config auditwork differently forIE&Chrome
WLJPI3.0_Adhoc_9
CSCuv75133PassedTo verify whetherthe dashboardnavigation page istranslated toJapanese character
DashboardNavigation page nottranslated toJapanese
WLJPI3.0_Adhoc_12
CSCuv52296PassedTo verify the list ofcreated templates
Features andtechnologies page
WLJPI3.0_Adhoc_15
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)22
Regression Features - Test SummaryAdhoc Test cases
CSCuv53907FailedTo verify mobilityanchorconfiguration aftersetting mobilitystatus up ,sync (wlcto PI)
Mobility anchorsettings for wlanprofile after configsync
WLJPI3.0_Adhoc_16
Related DocumentationCisco Prime Infrastructure 3.0 Quick Start Guide
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/quickstart/guide/cpi_qsg.html
Configuration guide
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/2-2/configuration/guide/pi_22_cg.html
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78) 23
Regression Features - Test SummaryRelated Documentation
Test Results Summary for Cisco Prime Infrastructure 3.0 for Japan (Release Version 3.0.0.0.78)24
Regression Features - Test SummaryRelated Documentation