99

BLADES

Quality

Blades for Safety Knives

Snap Off Blades

Scraper Blades

Industrial Blades

P.98

P.100

P.101

P.102

P.102

100

92250

92116

92126 92129

692126 692129

92136 92139

92132

692136 692139

92216 92219

92212

692216 692219

92226 92229

692226 692229

92236 92239

692239

92406 92409

692406 692409

92306

692306

92416 92419

692416 692419

692137

Straight blades

STRAIGHT 50 mmLength 50 mm. Thickness 0.65 mm.

LONG STRAIGHT 60 mmLength 60 mm. Thickness 0.65 mm.

STRAIGHT SPECIAL 60 mmLength 60 mm. Thickness 0.65 mm.

Hooked blades

SMALL HOOKThickness 0.65 mm.

LARGE HOOKThickness 0.65 mm.

SUPER HOOKThickness 0.65 mm.

FOR CARPET & VINYL TRIMMERThickness 0.65 mm.

FOR HIGH-TECH TRIMMERThickness 0.65 mm

CONCAVEThickness 0.65 mm.

SUPER HOOK TITANIUMIce hardened steel titanium coated. 3 times more longlasting. Ideal for natural floorings (sisal, coco).

STRAIGHT «V-REX BLACK»Length 60 mm. Thickness 0.65 mm Extremely hard tempered

steel, black surface treatment. Long life.

QUALITY

TYPETITANIUM

100 Blades Safety Dispenser

QUALITY

TYPE

100 bladesSafety Dispenser

QUALITY

TYPE

100 Blades Safety DispenserCard with 10

blades

QUALITY

TYPE

100 Blades Safety DispenserPACK of 900

bladesCard with 10

blades

QUALITY

TYPE

100 Blades Safety DispenserDispenser of 900 bladesCard with 10 blades

QUALITY

TYPE

100 Blades Safety Dispenser

Card with 10 blades

QUALITY

TYPE

100 Blades Safety DispenserCard with 10

blades

QUALITY

TYPE

100 Blades Safety Dispenser

Card with 10 blades

QUALITY

TYPE

100 Blades Safety Dispenser

Card with 10 blades

QUALITY

TYPE

100 Blades Safety Dispenser

Card with 10 blades

QUALITY

TYPE

V-REX

BLACK10 blades

carded

101

692706

92600 92609

692600 692609

92700 92709

692700 692709

92750

92720

92809

692730

9 mm Cutter blades

18 mm Cutter blades

STANDARD 9 mmWidth 9 mm. Thickness 0.40 mm. 12 segments.

STANDARD 18 mmWidth 18 mm. Thickness 0.50 mm. 7 segments.

TAJIMA 18 mm RAZAR BLACK • More pointed sharpening angle for a better cutting finish. • Highly alloyed steel, best shelf life. Distributor of 10 blades. • Treatment of dark surface - for a better blade slide, - prevent glue adhesion - avoid oxidization.

18 mmWidth 18 mm. Thickness 0.50 mm. 14 segments.

THICK 18 mmWidth 18 mm. Thickness 0.65 mm. 7 segments.

HARD CUTTER 25 mmWidth 25 mm. Thickness 0.70 mm. 6 segments.

25 mm Cutter blades

MULTI HOOK 18 mmLength 18 mm. Thickness 0.5 mm. 3 segments.

Découverte 2010

QUALITY

TYPE

RAZAR

BLACK

10 blades carded

QUALITY

TYPE

100 Blades Safety Dispenser

Card with 10 blades

QUALITY

TYPE

100 Blades Safety DispenserCard with 10

blades

QUALITY

TYPE

100 Blades Safety Dispenser

QUALITY

TYPE

100 Blades Safety Dispenser

QUALITY

TYPE

Pack of 5 blades

QUALITY

TYPE

10 blades card

102

92520

1-92520

92560

1-92560

92515

1-92515

92510

1-92510

92525

92540

92530

92554

92000

92010

692010

92020

692050

Scraper blades

10 blades / dispenser.

Pack of 5 blades.

FOR SCRAPER - Standard 10 cmLength 102 mm. Width 14 mm. Thickness 0.45 mm.

FOR SCRAPER - Standard HD, 10 cm widthLength 102 mm. Width 18 mm. Thickness 0.65 mm.

FOR SCRAPER - Rounded angles 10 cmLength 102 mm. Width 14 mm. Thickness 0.45 mm.

FOR SCRAPER - with notches 10 cmLength 100 mm. Width 14 mm. Thickness 0.45 mm.

FOR WINDOW SCRAPERS 10 cmLength 102 mm. Width 18 mm. Thickness 0.30 mm.

FOR «BIG-SCRAPER» 12.7 cmLength 127 mm. Width 19 mm. Thickness 0.90 mm.

FOR «MEGA SCRAPERS» 20 cmLength 200 mm. Width 19 mm. Thickness 0.90 mm.

For «SCRAP LACANET» 15 cm and «VARIO SCRAPER»Length 150 mm. Width 18 mm. Thickness 1 mm.

Safety industrial blades

SQUARE ENDED RAZOR BLADESLength 38 mm.

TRAPEZE Patented modelLength 38 mm. Thickness 0.30 mm.

STRAIGHT SECURITY 70 mmLength 70 mm. Thickness 0.50 mm.

For 691045 safety knife

Loose packed

10 blades carded

100 Blades in Dispenser

10 blades carded

100 Blades in Dispenser

10 blades carded

100 Blades in Dispenser

10 blades carded

100 Blades in Dispenser

10 blades carded

5 blades carded

5 blades carded

10 blades carded

THIN THICK

THICKNESS 0.15 mm 0.30 mm

100 per box

50 per box

50 per blister

QUALITY REF

50 blades per pack

QUALITY

TYPE

Blister card (10 blades)

104

691180 91180

91195

91183

91075 91185

91280

FLOORING TOOLS CUTTING

Autolock cutters

AB - 9 mm Autolock cutter. Supplied with 2 extra quality spare blades in the handle. Blades snapper cap.

AB - 18 mm Autolock cutter. Supplied with 2 extra quality spare blades in the handle. Blades snapper cap.

18 mm «Classic» cutters

RP 3000 - 18 mm Autolock. Blades snapper cap. Supplied with 2 extra quality spare bladesin the handle.

Blister card Supplied loose

AB METAL - 18 mm Autolock professional cutter in zinc alloy.Blades snapper cap.Supplied with 1 blade in handle.

BEST SELLER

NE

W

!!

25 mm Cutters

«HARD CUTTER» - 25 mm Locking system by turning the knurl. Bi-material. Length: 170 mm. Uses blades 92809. Supplied in blister card.

FOR

PLASTERBOARDS

RP4000 - 18 mm Autolock cutter with metal fi n. Supplied with 2 spare blades.

FIN FOR MARKING FLOORCOVERING OR CARDBOARD BEFORE CUTTING

HEAVY DUTY LOCKING SYSTEM.

105

91060

91190 91200

91285 91255

91272 91273

Supplied with 5 blades in the cartridge.

FLOORING TOOLS CUTTING

Cutters

LC - 303 Universal cutter. Supplied with 2 spare blades in the handle. Blades snapper cap. Supplied in blister card.

LC - 521 Strong blocking system by turning the knurl. Supplied with 2 spare blades in the handle. Supplied in blister card.

LC - 520 Double blocking system. Heavy duty purpose. Supplied with 2 spare blades in the handle. Supplied in blister card.

Screw driver Openingpainting pots

Marking

AC - 521 Strong blocking system by turning the knurl. Supplied in blister card.

UP TO 25 KG

PRESSURE

LCM-500 - 18 mm Aluminium handle moulded with anti-slip elastomer. Shockproof and autolock. Supplied in blister card.

DC - 501 Strong blocking system by turning the knurl. Stainless steel blade guide reinforced at the end: can serve as a screwdriver. In the back, a hook can be used to trace the covering, cardboard, ... Supplied in blister card

NE

W

!!

NE

W

!!

DC - 561 Strong blocking system by turning the knurl. Stainless steel blade guide reinforced at the end. Can be used as a screwdriver. Ergonomic elastomer handle: better grip. Supplied with 2 spare blades in the handle. Supplied in blister card.

HEAVY DUTY

CUTTERS

- WITH FIN

- ALUMINIUM BODY

AUTOMATIC

BLADE LOADING

SUPPLIED WITH

RAZARBLACK BLADE

106

91210 91220

1 2 3

691000 691030

93420

93421

93422

93426

93427

93428

FLOORING TOOLS CUTTING

Automatic cutters

A metal blades loading magazine is located inside the cutters body. This may hold 5 to 6 blades.

Take the worn out blade from the front end of the cutter.

Pull the cursor all the way back to retrieve a new blade.

Push the cursor and the new blade is ready.

A 1000 R - 9 mm Autolock cutter. Aluminium body. Blades snapper cap. Supplied in blister card with 9 mm spare blades in the cartridge.

L 2000 P - 18 mm Locking system by turning the knurl. Blade s snapper supplied separetely. Supplied in blister card with 3 (18 mm) spare blades in the dispenser.

ALUMINIUM BODY

AUTOMATIC

BLADE

CHANGING

«Kicoupp»

KICOUPP Registered design. Made of fi ne polished aluminium. Special for butt joints. Supplied without blade in blister card. Uses blades 92000, 92010 and 92020.

«KICOUPP» WITH PROTECTED SOLE To cut coverings without damaging the support. Increases blades life. Supplied without bladein blister card.Uses blades 92040

and 92010.

Tile cutters

TILE CUTTER For rigid and soft PVC tiles, linoleum, rubber, etc. Aluminium structure.

30 cm Cutting width: 30 cm.

30 cm Spare upper blade

30 cm Spare base blade

61 cm Cutting width: 61 cm.

61 cm Spare upper blade

61 cm Spare base blade

107

91410

91400

91415

FLOORING TOOLS CUTTING

Trimmers

HIGH-TECH TRIMMER Patented model. Ideal tool for perfect and quick trimming of all kinds of fl oor coverings. The double adjustment of the cutter is achieved thanks to the double knurled knob: 1 - blades extraction, 2 - required tilt. It enables you to trim in both directions assuring a perfect cutting joint.

Angle adjustment by tilting, as shown on the pictures.

As shown on the drawings, small angle «A» is required for a perfect cut of a thick

fl oor covering and larger angle «B» is required for a thin one.

Uses blades 92416. Supplied with 2 blades,

bubble packed.

THICK FLOOR

COVERING

THIN FLOOR

COVERING

CARPET & VINYL TRIMMER Registered design. To easily trim thin fl oor covering. Uses blades 92406.

Supplied with 2 blades, packed in blister card.

INCLINE ANGLE ADJUSTMENT

BLADES IN - OUT

THE THINER FLOOR

COVERING IS THE MORE THE

STOPS HAVE TO BE

EXTRACTED AND INVERSELY

RUBIROM TRIMMER

Several working positions possible, left-right handed, pulling or pushing.

Cast aluminium. For trimming thin fl exible fl oor coverings. Uses blades: 92700 - 92720

or multi-hook cutter blades 92730.

N

EW !!

108

691101 91101

691130

691102 91102

91645

91155

691140

91140

91035

91100

FLOORING TOOLS CUTTING

Knives

PAINTED KNIFE

Made in zamak injected under pressure. High precision blades

holding device with safety studs.

Blister card Supplied loose

RETRACTABLE KNIFE Injected aluminium. 4 cutting positions. Supplied assembled with 1 straight blade. In blister card.

POLISHED KNIFE

Blister card Supplied loose

LINOLEUM KNIFE Made of chromium-stainless steel. Ergonomic elastomer handle. Length: 22 cm.

LONG KNIFE For cutting strips in standing position before fl oor covering removal with a stripper. Length: 1.30 m. Uses straight interchangeable blades 92116

and hooked trimmer blades 92400 and 92410.

Safety knives

Automatic retractable blade device avoiding cutting risks when blade slips.

SAFETY RETRACTABLE KNIFE Made of zamak, painted black. Supplied with a mounted long straight blade. Spare blades 92136 and 92139.

Blister card

Supplied loose

KIT «SAFETY CUT» Includes: 91045 91140 692050 92136

94896

Red paint fi nish. Supplied without blade.

Shiny fi nish. Supplied without blade.

V-REX SAFETY KNIFE Cast metal fi xed blade knife. Quick opening by simply turning the knurl.Supplied with 3 straight blades «V-REX Black». In blister card.

Closed

Open

NE

W

!!

109

91115

91150

91653

91652

91655

92105

91650

92040

FLOORING TOOLS CUTTING

Automatic knives

«TAUREX®» KNIFE it extremely comfortable to use. Can withstand up to 60 000 openings.

made possible. Once the new blade has been replaced,close and lock the knife. The «TAUREX» knife is ready for use.

any movement of the blade.

GENUINE DELPHIN KNIFE 91150 Blister packed81150 LooseGENUINE DELPHINE KNIFE.Made of cast aluminium.Fast opening. Supplied with holster

Specifi c knives

CIRCULAR CUTTER Diameter from 4 to 16 cm. Supplied with 2 blades. For repairing burnt or worn areas.

Spare blades Pack of 2.

LOOP PILE CUTTER For foam backed fl oor coverings. Supplied with 10 blades 92105.

Spare blades Pack of 10.

CARPET KNIFE For tufted carpets. Supplied with 10 blades 92040.

Spare blades. Pack of 10.

MAGNETIC LUG SECURING THE

BLADE

LOCKING PISTON

NONSLIP GRIP

OPENING

SPARE BLADES IN THE HOLSTER

KNURL

CHANGE YOUR BLADES

WITHIN 4 SECONDS

EASY

OPENING

PATENTED

111

91320

93870

91350

91340

91385

DroitierLongueur : 26 cm.

91380

93400

93405

93415

93410

UTI

LISATION

UTI

LISATION

91370

FLOORING TOOLS CUTTING

CARPET SHEARS High quality steel. Polished and chromium plated.«Nogent» quality. First quality product. NAPPING SHEARS

To cut off excess fi bres. Length: 150 mm.

OFFSET HANDLE SHEARS Suitable for cutting natural fl oor coverings. High grade steel. Polished and chromium plated. Length: 25 cm.

BENTHANDLE SHEARS Lacquered blades, chromium plated nib.

Right handed Length: 28 cm.

CONCAVE SHEARS Stainless steel blades. Plastic rings.Length: 27 cm. Higher sharpness.Remove and stock the excess of wall paper glue.

Shears for fl ooring

STAINLESS STEEL SHEARS Stainless steel blades. Plastic rings. Length: 26 cm.

Profi les Shears

DÉMULTIPLIÉE COVERSTRIP SHEARSVanadium chromiun plated steel. for cutting 10/10 st steel, 18/10 brass, 15/10 steel, 17/10 aluminium profi les

STANDARD AVIATION SNIPSEuropean superior qualitySpecial notch blade.For cutting 10/10 stainless steel 12/10 brass, and 17/10 aluminium coverstrips

MITRE SHEARS

STRAIGHT SHEARS

PURPOSE

Especially designed for cutting

effortless rounded coverstrips

without bending them.

PPURPOSE

For cutting

smoothedges grippers,

PVC profi les, Ceramic

PVC profi les.

PLURICOUP Polished stainless steel teeth blades 42 mm. Ergonomic handle. Length 165 mm. For cutting PVC profi les, underlay, cables diam. max. 10 mm...