Tender Spc

8/8/2019 Tender Spc

http://slidepdf.com/reader/full/tender-spc 1/16

TUTICORIN PORT TRUST

Name of Work : MODI FYING THE EXISTING TRASIT SHED INTO MARRIAGE HALL FOR

CHLP LABOURERS INSIDE ZONE- B

PART I CIVIL CONSTRUCTION WORK

PRICE BID

Schedule of Work

Sl.

No.Description Of Item Qty

Unit Rate Amount

In Figures In Words

1 Jungle clearance including uprooting of juliflora trees, rank

vegetation, grass, bush wood ,sapling and trees not exceeding 30

cm girth ,etc and removing not exceeding 50 m outside the periphery of the area cleaned etc., complete complying with AISS

and as directed by the Departmental Officers.

sqm

2 Earth excavation in trenches for foundation for walls in sand andother loose soils including dressing of sides and ramming of bottom, lift upto 1.5m, including getting out the excavated soil,

refilling the sides of foundation with excavated earth in layers of 15 cm thick well rammed, watered , consolidation depositing the

surplus earth in place shown by the Departmental officers within a

lead of 50 m and lift of 1.5m and cost including shuttering,strutting , bailing out of seepage of water wherever necessary and

clearing , leveling the site etc, complete complying with AISS andas directed by Departmental Officers.

cum

3 Filling in basement with available excavated earth in layers wellrammed and consolidation and watering etc., complete complying

with AISS and as directed by the Departmental Officers.

cum

4 Filling the basement under floor and below foundation concrete

for cushioning with river sand in layers watering, ramming,

consolidation etc., complete complying with the AISS and asdirected by the Departmental Officers.

cum

8/8/2019 Tender Spc


Sl.

No.Description Of Item Qty

Unit Rate Amount

In Figures In Words

5 Providing and laying C:C 1:4:8 (1 cement, 4 sand and 8 graded

stone aggregate i.e. 6 parts of 40 mm. nominal size, 2 parts of

20mm metal) for foundation for walls including shoring,shuttering, mixing, laying, leveling, consolidation, finishing and

curing etc., complete complying with AISS and as directed byDepartmental Officers.

cum

6 Providing and laying flooring concrete 10 cm. thick in C:C

1:3:6 (1 cement ,4 and 8 graded stone aggregate i.e. 6 parts of 40mm. nominal size metal, 2 parts of 20 mm metal) including

laying, leveling, consolidation , finishing and curing etc.,

complete complying with the AISS and as directed by the

Departmental Officers.

sqm

7 Providing and laying C:C 1:2:4 (1 cement, 2 sand and 4 graded

stone aggregate ie 3 parts of 20 mm. nominal size, 1 parts of 10mm metal) and curing etc., complete excluding cost of form

work and reinforcement grills, for all R.C.C works such as beams, slabs, lintels, sunshade hand rails complete in all floors

upto full height of the building complying with AISS and as

directed by Departmental Officers.

cum

8 Brick Work in Cement Mortar 1:5 (1 cement, 5 sand) usingchamber burnt bricks for walls in all floors upto full height of

the building including cost of scaffolding, cleaning, curing etc.,complete complying with AISS and as directed by Departmental

Officers.

cum

9 Providing half brick masonry wall using chamber burnt bricks in sqm

8/8/2019 Tender Spc


Cement Mortar 1:3 (1 cement, 3 sand) for partition wall, parapetwall etc., in all floors including cost of all materials, labour

scaffolding etc., complete complying with AISS and as directed by Departmental Officers.

10 Brick Work in Cement Mortar 1:3 (1 cement & 3 sand) using

chamber burnt bricks for steps including cost of scaffolding,

cleaning, curing etc., complete complying with AISS and asdirected by Departmental Officers.

cum

11 Providing and fixing 16 mm. dia M.S. rods to window and

ventilator horizontally at 10 cm. center to center in all floorsincluding cost of M.S. rods, M.S. flats and labour fixing and

applying one coat of ready mixed red oxide primer of approved

quality, etc., complete complying with AISS and as directed byDepartmental Officers. (Approved quality M.S. rod and flat shall

be procured by the contractor at his cost).

Kg

12 Fabricating and placing in position M.S. / Tor steel grills for RCC works in all floors including cost of steel, cutting, bending,

binding with binding wire and placing in position etc., completecomplying with AISS and as directed by Departmental Officers.

ton

13 Providing and fixing M.S. grills of required pattern to window

frames / wall faces etc with M.S. Flats at required spacing and

frame all-round, square or round bars with round head bolts andnuts or by screws or with hold fast etc to suit the working space

including cost of applying one coat of red oxide primer, costinclusive of primer paint, labour for lifting and fixing etc.,

complete complying with AISS and as directed by Departmental

Officers.

Kg

14 Providing R.C.C. work smooth finishing of the exposed surfacein all floors with Cement Mortar 1:3(1 cement & 3 sand) 6 mm

sqm

8/8/2019 Tender Spc


thick complying with AISS and as directed by DepartmentalOfficers.

15 Providing and laying Bearing, Plastering for roof slab, beams

over brick work in Cement Mortar 1:3, 6 mm. thick and finishedwith floating coat of neat cement and providing craft paper

complying with AISS and as directed by Departmental Officers.

sqm

16 Stucco Plastering on exterior wall upto a height of 10 meters

above ground level with a mixture of washed crushed stonegraded from 6mm. to 12mm. nominal size dashed over and

including fresh cement plaster in two coats, backing coat 10mm.cement plaster 1:3 (1 cement & 3 sand) and finishing coat

10mm. cement plaster 1:3 (1 cement & 3 sand) mixed with 10%

finely grounded hydrated lime by volume of cement etc.,complete complying with AISS and as directed by Departmental

Officers.

sqm

17 Providing 20 mm. thick Cement Mortar band , the width anddepth of border being 20 mm. & 50 mm. respectively in Cement

Mortar 1:4(1 cement & 4 sand) complying with AISS and asdirected by Departmental Officers.

Mts

18 Plastering the brick wall 15mm. thick in Cement Mortar 1:5(1

cement and 5 sand) for all faces of wall (even and uneven) in all

floors upto full height of the building including necessaryscaffolding, racking of masonry joints, cleaning, curing, etc.,

complete complying with AISS and as directed by DepartmentalOfficers.

sqm

19(a) Supplying and fixing in position of the following size and type

of wooden doors in all floors with hard Kongu wood frames and

Venteak shutters as per drawings including cost of hold fasts andapplying one coat of primer of approved quality and including

no

8/8/2019 Tender Spc


cost and fixing of first quality ISI standard, approved byDepartment furniture fittings, complying as per list enclosed

with screws / bolts & nut, the rate shall include cost of wood,labour for wrought and put up, furniture fittings, primer etc.,


Officers.

C.W. Door Size 1.05 m x 2.13 m

19(b) C.W. Door Size 1.00 m x 2.13 mno

19(c) C.W. Door Size 0.90 m x 2.13 mno

19(d) C.W. Door Size 1.20 m x 2.13 mno

20(a) Supplying and fixing in position of the following size and typeof wooden doors in all floors with hard Kongu wood frames and

Venteak shutters as per drawings including cost of hold fasts andapplying one coat of primer of approved quality and includingcost and fixing of first quality ISI standard, approved by

Department furniture fittings, as per list enclosed with screws / bolts & nut, the rate shall include cost of wood, labour for

wrought and put up, furniture fittings, primer etc., completecomplying with AISS and as directed by Departmental Officers.

C.W. Door Size 1.80 m x 1.38 m

no

20(b) C.W. Door Size 1.20 m x 1.38 m no

20(c) C.W. Door Size 0.90 m x 1.38 mno

21 Supplying and fixing in position of the following size and typeof wooden ventilators in all floors with hard Kongu wood frames

and Venteak shutters as per drawings including cost of hold fasts

no

8/8/2019 Tender Spc


and applying one coat of primer of approved quality andincluding cost and fixing of first quality ISI standard, approved

by Department furniture fittings, as per list enclosed with screws/ bolts & nut, the rate shall include cost of wood, labour for

wrought and put up, furniture fittings, primer etc., complete

complying with AISS and as directed by Departmental Officers.

C.W. Ventilator size 0.90 m x 0.60 m Fully glazed Swing Type.22 Supplying and fixing PVC. Polypan / Sintex frame with door

shutter of size 0.75 x 1.98 m panel 20mm thick including costand fixing of approved quality furniture fittings as per list

enclosed including conveyance of door frame, shutter and other

accessories and fixing in position etc., complete complying withAISS and as directed by Departmental Officers

no

23 Providing and fixing Readymade anodized aluminum door frameand door shutter of size 1.2m x 2.13m using heavy aluminum

section (manufactured to relevant IS) with 2.5” x 1.5” section for

frame fixing to wall and shutter frame bottom with 4” x 1.75”and for other horizontal and vertical frames with 1.75” x 1.75”section, bottom 70 cm height with NOVAPAN shutter of

approved quality and top portion of door with 5mm thick glass

of superior quality, cost inclusive of frames, shutters, glass,labour for fixing, wooden plugs, screws, glazing clips, handles,

lock, floor spring etc., complete complying with AISS and asdirected by Departmental Officers.

no

24 Supplying and fixing of shelf shutter with C.W frame & shutter

using 20 mm thick C.W planks and applying one coat of wood primer of approved quality including cost of wood, wrought and put up, transport and fixing of first quality IS standard furniture

fittings with screws as per list enclosed etc complete complyingwith AISS and as directed by Departmental Officers.

sqm

25 Applying two coats of water proofing cement paint of approved

colour and quality over plastered surface in all floors including

sqm

8/8/2019 Tender Spc


cleaning, preparation of wall, cost of paint, brushes, scaffolding,curing the painted surface etc., complete complying with AISS

and as directed by Departmental Officers.

26 Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on interior wall

plastered surface in all floors to give an even shade, over and

including priming coat with distemper primer of approved brandand manufacture after thoroughly brushing the surface free from

mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth etc.


Officers.

sqm

27 Painting two coats on new wood works in all floors for bothinterior and exterior sides with synthetic enamel paint of

approved colour and quality such as Asian – Apcolite, Berger –

Luxol, I.C.I – Dulux etc., excluding cost of priming paint butincluding cost of finishing paint, brushes, cleaning etc., completecomplying with AISS and as directed by Departmental Officers.

sqm

28 Painting two coats (excluding primer coat) on new steel and

other metal surfaces with Enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign matter etc. complete complying with AISS and as


sqm

29 Finishing the wall surface with one coat of cement paint of approved colour to give an even shade including cleaning the

surface of all dirt, dust and scaffolding charges cost of materials,

labour etc. complete as directed by Departmental Officers.

sqm

30 Painting one coat (excluding priming coat) on previously paintedwood surface with synthetic enamel paint of approved colour

sqm

8/8/2019 Tender Spc


best quality such as Berger, Luxol, Asian, Apcolite, ICI, duluxetc to give an even shade including cleaning the wooden surface

and glass in windows & ventilators of all dirt, dust and other foreign matter, sand papering etc. complete as per AISS and as


31 Providing and laying ceramic tiles of approved quality and brand

in skirting to walls on 10 mm thick cement plaster 1:3(1 cementand 3 sand) and joined with white cement slurry and making

good the surface of wall etc cost inclusive of all materials,adhesives, labour charges etc., complete complying with AISS


sqm

32 Providing and laying 20mm. thick Cement Concrete topping 1:2

to 3 (1 cement and 2 to 3 stone aggregate of size 4.75mm. and below by volume) laid over the floor monolithically with base

concrete (excluding cost of base concrete) complying with AISS


sqm

33 Providing and laying “Spartek” tiles of approved size in all

floors, threads and rising of steps, landings laid on a bed of 12mm. thick cement mortar 1:3 (1 cement, 3 sand) and joined

with white cement slurry cost including all materials, labour

charges etc complete complying with AISS and as directed byDepartmental Officers.

sqm

34 Supplying and fixing in position of Cuddapa slab two side

finished surface of minimum thickness of 20mm to shelves, costinclusive of all materials labour charges etc. complete complying

with AISS and as directed by Departmental Officers.

sqm

35 Providing form work including centering, shuttering so as to

give rough finish strutting and propping etc., in all floors uptofull height of the building and removal of the same for all the in

sqm

8/8/2019 Tender Spc


–situ R.C.C. works such as beams, slab, lintels, sun-shade, handrails etc., complete complying with AISS and as directed by


36 Random Rubble Masonry with hard broken stones in foundation

and plinth with C.M. 1:5 (1 cement, 5 sand) including leveling at plinth level complying with AISS and as directed by


cum

37 Flush pointing on Random Rubble Masonry with Cement Mortar

1:3 (1 cement & 3 sand) complying with AISS and as directed by Departmental Officers.

sqm

38 Providing and laying Damp Proof Course with C.M. 1:2 (1

cement & 2 sand) 20mm. thick by adding water proofing,materials as recommended by the manufacturers and curing etc.,


Officers.

sqm

39 Supplying and fixing in position P.V.C. double layered water tank 1000 lit capacity of first quality and make approved by the

Department including lifted to roof slab, placing in position,making required number of holes for inlet, outlet, overflow and

scouver pipe fittings etc., complete as directed by DepartmentalOfficers.

no

40 Providing fixing in position precast R.C.C. jally 8cm. thick of

approved design and as per drawing in cement concrete 1:1.5:3

(1 cement, 1.5 sand and 3 graded stone aggregate of size12.5mm. and below) excluding cost of reinforcement grills but

including cost of concrete, moulding and labour charges etc.complete complying with AISS and as directed by Departmental

Officers.

sqm

41 Supplying and fixing in position of 110mm.(OD) P.V.C. rain Mts

8/8/2019 Tender Spc


water down fall pipe with necessary specials including cost of pipes, specials such as bend, shoe, brackets and CW plugs for

fixing etc., complete complying with AISS and as directed byDepartmental Officers.

42 Providing and laying on terrace, lime concrete weathering course

with graded brick aggregate 25 mm nominal size and 50%

mortar comprising of one lime putty and two surkhi to anaverage thickness 80mm., and giving required slope well beaten

with beaters, curing, etc., complete complying with AISS and asdirected by Departmental Officers.

cum

43 Finishing the top of weathering course with one course of

machine pressed tiles of size 20 cm x 20cm x 2cm grouted with

cement mortar 1: 3(1 cement, 3 sand) mixed with water proofingmaterials as recommended by manufacturer over 12mm layer of

same cement Mortar 1:3(1 cement,3 sand) and finished neat

complete complying with AISS and as directed by Departmentalofficers.

sqm

44 Dismantling the existing A.C sheet ,tuff light sheet and A.Cridges from roof truss etc stacking the serviceable materials and

disposal of un serviceable materials and disposal of

unserviceable materials with in 100 meters lead completecomplying with AISS and as directed by Departmental officers.

sqm

45 Demolition of PCC concrete below G.L. upto 1m depth

including disposal of unserviceable materials with 100m leadetc. complete complying with AISS and as directed by


cum

46 Dismantling and removal of brick wall in all floors including

stacking of serviceable materials and disposal of unserviceablematerials with in 100 mts lead etc complete complying with

cum

8/8/2019 Tender Spc


AISS and as directed by Departmental Officers.

47 Dismantling of 100m dia. A.C pipe with fittings includingstacking of serviceable materials and disposal of unserviceable

materials with in 100 mts lead etc complete complying withAISS and as directed by Departmental Officers.

Mts

48 Demolition of stone masonry above G.L. and stacking of serviceable materials and disposal of unserviceable materials

with in 100 mts lead etc complete complying with AISS and asdirected by Departmental Officers.

cum

49 Dismantling and removal of existing R.C.C. Concrete and

disposal of all materials with in 100 mts lead etc completecomplying with AISS and as directed by Departmental Officers.

cum

TUTICORIN PORT TRUST

Name of Work : MODI FYING THE EXISTING TRASIT SHED INTO MARRIAGE HALL FOR

CHLP LABOURERS INSIDE ZONE- B

8/8/2019 Tender Spc


PART II WATER SUPPLY AND SANITARY ARRANGEMENTS

PRICE BID

Schedule of Work

Sl.No.

Description Of Item Qty Unit Rate AmountIn Figures In Words

1 Earth work in trenches for laying G.I. Pipe line and sewer line insand and other loose soil to full depth as directed including

shuttering, strutting , bailing out of seepage of water wherever necessary, refilling the trenches after laying of pipe line with

excavated earth in layers of 15 cm thick and depositing the surplus

earth in place shown by the Departmental officers within a lead of 50 m and lift of 1.5m including clearing and leveling the site


Officers.

cum

2 Supplying and laying in trenches 32mm. dia. Medium class G.I.

inflow pipe line with necessary pipes specials such as elbow, tee,Union joints etc., including wrapping with tar dipped gunnies to

the entire outer surface of the pipe line and the joint being

tightened including cutting, threading, cost of pipes, specials, etc.,complete complying with AISS and as directed by Departmental

Officers.

Mts

3 Providing and fixing to walls, ceiling and floor with medium classG.I. pipe of 20mm. dia. with necessary clamps and screws, making

holes in the wall wherever necessary or drilling holes in the roof

making materials, packed the holes with necessary brick work or concrete wherever necessary and plastering the surface smooth

with required scaffolding, including cost of pipes and specialssuch as elbows, tee, union joints, reducers, cutting, threading, etc.,


Mts

8/8/2019 Tender Spc


Officers.

4 Providing and fixing to walls, ceiling and floor with medium classG.I. pipe of 32mm. dia. with necessary clamps and screws, making

holes in the wall wherever necessary or drilling holes in the roof making materials, packed the holes with necessary brick work or

concrete wherever necessary and plastering the surface smooth

with required scaffolding, including cost of pipes and specialssuch as elbows, tee, union joints, reducers, cutting, threading, etc.,

complete complying with AISS and as directed by DepartmentalOfficers.

Mts

5 Supplying and fixing in position heavy duty 15mm. dia. (ISI) brass

screw down tap as approved by the Department complying with

AISS and as directed by Departmental Officers.no

6 Supplying and fixing in position 450mm x 300mm x 6mm size

mirror of best make, first quality approved by the Departmentincluding plywood back, plugs, screws, etc., complete as directed by Departmental Officers.

no

7 Supplying and fixing in position C.P Soap Tray of standard size

and approved make/pattern on the walls including cost of plugs,C.P brass screws, etc., complete as directed by Departmental

Officers.

no

8 Supplying and fixing in position 20 mm dia. Aluminium towel rail

600 mm long of best Indian make approved first quality withnecessary bracket, C.P brass screws, plugs, etc, complete as


no

9 Supplying and fixing in position best Indian make first quality(approved by the Department) heavy duty gun metal wheel valve

20mm. dia. as directed by Departmental Officers.

no

8/8/2019 Tender Spc


10 Providing and fixing to walls, ceiling and floor 10kg. / cm2

working pressure PVC pipes of 50mm. dia. first quality of Phinolex or Chemplast approved by the Department with pipe

fittings and clamps including making good the walls, ceilings etc.,complete as directed by Departmental Officers.

Mts

11 Supplying and fixing in position first quality C.P. fancy bathshower (approved make / pattern) 15mm. with ball and socket

joint arrangements and bend, union etc., of approved quality asdirected by Departmental Officers.

no

12 Supplying and fixing in position 50mm. internal dia. outlet C.I.

Nahani trap of self cleaning design with C.I. grating on the topincluding necessary C:C 1:2:4 (1 cement, 2 sand and 4 graded

stone aggregate of 20mm. nominal size metal) for embedding,

curing, finishing, etc., complete as per standard specifications and

as directed by Departmental Officers.

no

13 Supplying and fixing in position best Indian make first quality

(approved by the Department) heavy duty gun metal wheel valve32mm. dia. as directed by Departmental Officers.

no

14 Supplying and fixing in position 75mm. x 75mm. C.I. gratings at

the entrance of outlet of waste water pipe in all floors includingembedding the grating with Cement Mortar 1:3 (1 cement & 3

sand) curing, finishing etc., complete as per standard

specifications and as directed by Departmental Officers.

no

15 Supplying and fixing in position of wash basin of size 550mm. x400mm. with specials, 15mm. C.P. heavy duty brass tap with

pentagonal head, PVC water pipe, inflow pipe, coupling, C.I. brackets, clamps, plugs, screws and giving water supply

connection and painting the exposed connection and brackets with

no

8/8/2019 Tender Spc


two coat of approved colour and quality complying with AISS andas directed by Departmental Officers.

16 Drilling 20mm. dia. hole in the existing Main pipe line and fixing

20mm. dia. ferrnle with necessary C.I. clamps, bolts and nutsincluding cost of all pipe specials such as nipple, G.I. reducer, G.I.

bend , rubber washer, gunny etc., complete complying with AISS


no

17 Providing and laying in trenches PVC pipes of 110mm. (OD) withfittings such as bends etc., complete complying with AISS and as

directed by Departmental Officers.Mts

18 Supplying and fixing of 15mm. Gate valve (Leader make) of approved quality including cost of material and fixing charges etc.,

complete as per standard specifications and as directed by


no

19 Construction of inspection chamber of size 0.60m x 0.60m (inner)height of 1.25m with bricks in CM 1:5 , necessary excavation for

laying foundation concrete 1:4:8 and finishing with 15mm Tk plastering in CM 1:5, including fixing light duty C.I. cover with

frame and finished smooth with floating coat of neat cement oninner walls and bed concrete, making holes for pipes etc.,


Officers.

no

20 Providing and fixing White vitreous China pedestal type (E W C) pan with white seat and lid and 10 lit low level flushing cistern

with necessary specials including making good the walls and floor as per AISS and as directed by Departmental Officers.

no

21 Providing and fixing Stainless steel sink of size 750 x 450 x

250mm. with specials such as 15mm, CP brass tap with elbow

no

8/8/2019 Tender Spc


handle, inflow pipe, waste water pipe and all other connectingaccessories etc., complete complying with AISS and as directed by


22 Providing and fixing 10 Lit capacity gaiser including cost of material and labour for fixing etc., complete and as directed by

Departmental Officers.no

23 Removing the existing PVC water tank and refixing the same in

terrace. Cost inclusive of labour for removing, refixing, makingwater supply, connection etc., complete and as directed by


no

Documents

Tender Spc