Tellabs DATA SHEET

see Tellabs.com for more information about Tellabs solutions 1

OverviewThe Tellabs® 1100-742G single Family Unit GPON Optical Network Terminal (ONT) is hardened for single-family home and small business applications. The ONT features two provisionable voice ports and four high-speed 10/100/1000 data ports. These support Voice-over-IP (VoIP), high-speed Internet (HsI) and Internet Protocol television (IPTV) services. The Tellabs® 742G ONT provides ITU-T G.984-compliant 2.5 Gbps downstream and 1.25 Gbps upstream. GPON interfaces with extended PON reach up to 30 km/18.6 mi.

The Tellabs® 742G ONT is compliant with ITU standard management control interface (OMCI) definitions. It is manageable from the Tellabs® Panorama™ Integrated Network Manager and supports the full range of FCaPs functions.

Features and Benefitsn Voice, data, IPTV and video services supported over a single

GPON passive optical link or active ethernet link

n support for a wide range of revenue-generating voice features

n Wire speed 1000 Mbps data transfer

n Qos handling, including eight traffic classes for triple-play service support

n extensive ethernet bridging plus VlaN tagging, switching and filtering capabilities for secure traffic management across services and end users

n Power management for preservation of essential services during aC power outage

n Indoor or outdoor wall mountable for easy installation

n Up to seven feet of internal fiber storage

Included HighlightsGPON ServiceThe Tellabs® 742G GPON ONT terminates GPON fiber via a single sC/aPC-type optical connector. It complies with GPON standard ITU-T Rec.G984.2 and G984.2 amendment. The ONT receives downstream data at 2.488 Gbps over a wavelength of 1490 nm and sends upstream data at 1.244 Gbps over a wavelength of 1310 nm.

Tellabs® 1100-742G Single Family Unit (SFU) GPON ONT

The Tellabs® 742G GPON ONT supports these physical layer features:

n support for Class b+ and optional Class C optics

n Transceiver is a Class 1 laser product and complies with FDa21 CFR 1040.10 and 1040.11.

n Received optical power monitoring

n supports point-to-point active ethernet signals up to 40 km

POTS (Plain Old Telephone Services)The Tellabs® 742G GPON ONT supports plain old telephone voice services over RJ-11- or IDC-equipped connectors.

n VoIP softswitch or Class 5-based high-quality voice service through POTs lines

n High-speed Internet or VoIP access through four 10/100/1000 base-T ethernet interfaces

n support for sIP protocol in one software load

n support for a myriad of GR-303/V5 gateway protocols

High-Speed Data ServicesThe Tellabs® 742G GPON ONT supports 10/100/1000 base-T interfaces. The ethernet interface operates as an Ieee 802.1D transparent bridge based on RFC-2684. Class of service as well as bandwidth is controlled through provider provisionable options. The ethernet port supports streaming IP video, IPTV content delivery and whole-home DVR, and meets ITU 802.1p Qos standards at the MaC level.

Figure 1. Tellabs® 1100-742G GPON ONT

Figure 2. Optional outdoor enclosure

DATA SHEET

see Tellabs.com for more information about Tellabs solutions 2

© 2015, Tellabs access, llC. all rights reserved.

+1 800 690 2324 +1 630 798 9900 www.tellabs.com

1415 West Diehl Road Naperville, Il 60563 U.s.a.

Take the next step. Contact Tellabs today.

Tellabs® 1100-742G sINGle FaMIly UNIT (sFU) GPON ONT

Tel0053 12/15

SpecificationsServices and FeaturesOptical:n 2.5 Gbps downstream,

1.244 Gbps upstream

n Optical wavelengths: 1490 +/-10 nm receive, 1310 +/-20 nm transmit

n launch power: 0.5 to +5 dbm

n Receiver sensitivity: -28 dbm

n Input power overload: -8 dbm

n Received optical power monitoring

n GPON/active ethernet configurable

GPON:n serial number discovery and registration

ID provisioning

n ITU-T G.984/G.988 compliance

n Dba support via Mode 0 DbRu (piggyback) reporting

n Downstream advanced encryption standard (aes) support

n Forward error Correction (FeC)

n Upstream traffic management using priority-based or rate-controlled scheduling

n support for up to 8 T-CONTs with multiple priority queues per T-CONT

n Multiple GeM ports with flexible mapping between T-CONTs and priority queues

n pbit-based GeM port and upstream priority queue selection

n IPTV traffic filtering (multicast GeM port)

OAM:n ITU-T G.984.4/G.988-based

management of all services

n Remote firmware upgrade, including automatic rollback

n VOIP configuration from remote server

n TR-69 provisioning

Ethernet L2:n 10/100/1000 base-T interface with

RJ-45 connectors

n Meets Ieee 802.1 specifications

n MDI/MDIX autosensing and autonegotiation

n ethernet bridging and switching per 802.1D

n 802.1p marking/remarking, DsCP mapping

n 802.1Q, including VlaN translation, filtering, tagging, stacking (QinQ)

n Up to 12 VlaN groups per port

n automatic MaC address learning, aging and filtering

n Up to 1,024 MaC address entries

n MaC address limiting

n Up to 256 multicast groups

n IGMP v2/v3 snooping

n IGMP snooping with immediate leave

n Downstream pbit and flow based laN port queue selection

n Downstream flow and laN port-based rate limiting

Voice:n equipped with RJ-11 connectors and/or

IDC connectors

n 5 ReN per line

n loop start

n balanced and unbalanced ringing

n Country-specific coefficients and tones

n DTMF dialing

n Metallic loop testing (GR-909)

n sIP (RFC 3261)

n DTMF encoding by relay or in-band method

n Class service support (Caller ID, Call Waiting, Call Forwarding, Call Transfer, etc.)

n G.711 ( -law & a-law), G.726-32, G.722, G.729

n DHCP client or static IP configuration

n echo cancellation

n T.38 and in-band Fax

n Voice activity detection and comfort noise generation

n Proven interoperability with major soft switch and voice gateway vendors

n Official Metaswitch and broadsoft certifications

PhysicalLEDs:n Power

n battery

n Optical status

n HPNa (Unused)

n NeT (ethernet link)

n MGMT (Management Traffic)

n POTs (Hook status)

Dimensions and Weight:n size: 13 x 11.25 x 4.3 in

(233 x 286 x 110 mm)

n Weight: 2 lb (.9 kg)

Environmental:n -40° C/F to +46°C (114.8°F)

ambient + solar load

n Humidity: 5% to 90%

n Outdoor enclosure sold separately

Power:n Power input: 12 to 14 VDC

n Power consumption: 13.0 to 20 W

n Input connection: Phoenix plug

n Dying gasp support

Regulatory Compliance:n safety: Ul/Csa 60950, IeC 60950, eTsI

n FDa — FCC 47 CFR Part 15, Class b and FDR 21 CFR

n 1040.10 and 1040.11 Class 1

n eMC: FCC Part 15 subpart b, Class b

n eN 55022, eN 55024, eN 300 386, Class b

n Ce: Compliant

n RoHs 6: Compliant

n Weee: Compliant