Tekla Extensions

7/23/2019 Tekla Extensions

1/60

Title Product version

20

20

20.0, 19.1

20

20.0, 19.1

20

WraparoundPipeFootprints

Export to Revit

PDMS Interoperabilit

For! Fa"e #reator

DS$% File &a!e Modi'er

%ersion

independent

Print Dra(in)s to PDF

$e*la #ivil Inte)ration20.0, 19.1, 19.0,1+.1, 1+.0

Rebar #oupler and n"-or 20.0, 19.1, 19.0,1+.1, 1+.0

Model Di!ensions20.0, 19.1, 19.0,1+.1, 1+.0,...

abel $ool20.0, 19.1, 19.0,1+.1, 1+.0,...

$rans!ission $o(er $e!pla
https://extranet.tekla.com/BC/tekla-structures-en/extensions/wraparound-pipe-footprintshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ExportToRevithttps://extranet.tekla.com/BC/tekla-structures-en/extensions/PDMS-TeklaStructureshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/form-face-creatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/dstv-file-name-modifierhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/print_drawings_to_pdfhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/teklacivilintegrationhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/couplerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/model-dimensionshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/label-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/transmission-tower-templatehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/transmission-tower-templatehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/label-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/model-dimensionshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/couplerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/teklacivilintegrationhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/print_drawings_to_pdfhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/dstv-file-name-modifierhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/form-face-creatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/PDMS-TeklaStructureshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ExportToRevithttps://extranet.tekla.com/BC/tekla-structures-en/extensions/wraparound-pipe-footprints


2/60

20

20

20

20

/IM Publis-er%ersionindependent

#onstru"tion Seuen"er

aout Point ppli"ator

E$/S D in*

Wall Panel S-oe #onne"tio20.0, 19.1, 19.0,1+.0, 1.0

SD&F !! to !etres%ersionindependent

Di!ensionin) $ool20.0, 19.1, 19.0,1+.1, 1+.0.x...

$op in For! Mar*er 20.0, 19.1, 19.0,1+.0, 1.0

$e*la 3pen PI $rainin) Ma%ersionindependent, 20.0,1+....

#op 4da
https://extranet.tekla.com/BC/tekla-structures-en/extensions/bimpublisherhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/construction_sequencerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/layout-point-applicatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ETABS-AD-Linkhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/wall-panel-shoe-connectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sdnf-mm-to-metreshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/dimensioning-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/column-top-in-form-markerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/tekla_open_api_training_materialhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/copy-udahttps://extranet.tekla.com/BC/tekla-structures-en/extensions/copy-udahttps://extranet.tekla.com/BC/tekla-structures-en/extensions/tekla_open_api_training_materialhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/column-top-in-form-markerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/dimensioning-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sdnf-mm-to-metreshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/wall-panel-shoe-connectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ETABS-AD-Linkhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/layout-point-applicatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/construction_sequencerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/bimpublisher


3/60

20.0, 19.1, 19.0

20

20.0, 19.1, 19.0

20.0, 19.1, 19.0

Extension 5aller

rea Rein6or"e!ent20.0, 19.1, 19.0,1+.1, 1+.0,...

Ere"tion Seuen"er20.0, 19.1, 19.0,1+.1, 1+.0

ttribute I!porter20.0, 19.1, 19.0,1+.1, 1+.0,...

$e*la India M# Setup 20120.0, 19.1, 19.0,1+.1, 1+.0,...

/E#8reports

#& Seuen"er20.0, 19.1, 19.0,1+.1, 1+.0,...

%irtual $our

IF# #-an)e Mana)e!ent 20.0, 19.1, 19.0,1+.1, 1+.0,...

S-rin* $ool

Solid2Plates20.0, 19.1, 1+.1,1+.0, 1.0
https://extranet.tekla.com/BC/tekla-structures-en/extensions/extension-galleryhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/area-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ErectionSequencerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/attribute-importerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/tinamcsetup2013https://extranet.tekla.com/BC/tekla-structures-en/extensions/BEC-reportshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/acn_sequencerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/virtual-tourhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/IFC-Change-Managementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ShrinkToolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/solid2plateshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/solid2plateshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ShrinkToolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/IFC-Change-Managementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/virtual-tourhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/acn_sequencerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/BEC-reportshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/tinamcsetup2013https://extranet.tekla.com/BC/tekla-structures-en/extensions/attribute-importerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ErectionSequencerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/area-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/extension-gallery


4/60

20.0, 19.1, 19.0

20.0, 19.1, 19.0

20.0, 19.1, 19.0

Rebar Release Mana)er%ersionindependent, 20.0,19....

3/ Export :Export to Rend

Dra(in) Mat"- ine20.0, 19.1, 19.0,1+.1, 1+.0

#urve di!ensionin)20.0, 19.1, 19.0,1+.1, 1+.0

#op 4sin) 7 Points

Move 4sin) 7 Points


5/60

20.0, 19.1, 19.0

20.0, 19.1, 19.0

20.0, 19.1, 19.0

P-ase &u!berin)20.0, 19.1, 19.0,1+.1, 1+.0,...

Fabri"ation Pro"ess 3r)ani20.0, 19.1, 19.0,1+.1, 1+.0,...


6/60

20.0, 19.1, 19.0

&eutral File I!port>Export20.0, 19.1, 19.0,

1+.0.x, 1+.0...

Wall Panel #orner #onne"ti20.0, 19.1, 19.0,1+.0, 1.0

Double $ee Rid)e /ea!20.0, 19.1, 19.0,1+.0, 1.0

ssi)n seuential 4Ds20.0, 19.1, 19.0,1+.1, 1+.0,...


7/60

20

20.0, 19.1

Wall panel rein6or"e!ent20.0, 19.1, 19.0,1+.1, 1+.0,...

Floor aout

?pan Stair Di!ensions%ersionindependent, 19.0,1+....

#o!ponent Mana)er1+.1, 1+.0, 1.0SR7, 1.0 SR1...

#o!bine Part Mar*s20.0, 19.1, 19.0,1+.1, 1+.0,...

/olt Di!ension $ools %ersionindependent, 1+.1,1+....

Pa"*a)in) $ool20.0, 19.1, 19.0,1+.1, 1+.0

i6tin) u) and i6tin) u) 20.0, 19.1, 19.0,1+.1, 1+.0

Plates Fro! /uilt8up Se"tio
https://extranet.tekla.com/BC/tekla-structures-en/extensions/wall-panel-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/floor-layouthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/zpan-stair-dimensionshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/component-managerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/combine-part-markshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/bolt-dimension-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/packagingtoolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/liftinglughttps://extranet.tekla.com/BC/tekla-structures-en/extensions/Plates-from-built-up-sectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/Plates-from-built-up-sectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/liftinglughttps://extranet.tekla.com/BC/tekla-structures-en/extensions/packagingtoolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/bolt-dimension-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/combine-part-markshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/component-managerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/zpan-stair-dimensionshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/floor-layouthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/wall-panel-reinforcement


8/60

20

P-ase #reator20.0, 19.1, 19.0,1+.1, 1+.0

Pattern ine20.0, 19.1, 19.0,1+.1, 1+.0

Weld pat-20.0, 19.1, 19.0,1+.1, 1+.0

Mes- #uttin) ist20.0, 19.1, 19.0,1+.1, 1+.0,...

Wall Ele!entation #o!pon


9/60

20.0, 19.1, 19.0

20.0, 19.1, 19.0

#urved /ea!20.0, 19.1, 19.0,1+.1, 1+.0,...

/olt #enterline Export 20.0, 19.1, 19.0,1+.1, 1+.0,...

4ser De'ned ttribute De'

De6ault 6ont in dra(in)s20.0, 19.1, 19.0,1+.1, 1+.0

#lipper20.0, 19.1, 19.0,1+.1, 1+.0,...

S!art7D Interoperabilit

3@s-ore Rin) Plate20.0, 19.1, 19.0,1+.1

Part Presentation Mar*20.0, 19.1, 19.0,1+.1, 1+.0,...

&ei)-bor 5rids nd #o!pa 20.0, 19.1, 19.0,1+.1, 1+.0,...

Se"tion /uilder

%ersion

independent, 20.0,19....

S*et"- s-eets20.0, 19.1, 19.0,1+.1, 1+.0

Ed)e Preparation Details20.0, 19.1, 19.0,1+.1, 1+.0
https://extranet.tekla.com/BC/tekla-structures-en/extensions/curved-beamhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/bolt-centerline-exporthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/userdefinedattributedefinitionshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/DefaultFonthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/clipperhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/smart3d-interoperabilityhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/offshoreringplatehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/part-presentation-markhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/neighborgridsandcompassmarkshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/section-builderhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sketch-sheetshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/edge-preparation-detailshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/edge-preparation-detailshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sketch-sheetshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/section-builderhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/neighborgridsandcompassmarkshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/part-presentation-markhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/offshoreringplatehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/smart3d-interoperabilityhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/clipperhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/DefaultFonthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/userdefinedattributedefinitionshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/bolt-centerline-exporthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/curved-beam


10/60

20.0, 19.1, 19.0

20.0, 19.1, 19.0

20.0, 19.1

20.0, 19.1

/ra"e dra(in)

Re6eren"e Model I!porter

Dra(in) /rea* ines20.0, 19.1, 19.0,1+.1, 1+.0

#o!ponent %ariables20.0, 19.1, 19.0,1+.1, 1+.0

5rid aout $ool

/ea! Mar*s20.0, 19.1, 19.0,1+.1, 1+.0

uto $as* Suite

Wor*Ao( Mana)er :Meridia 20.0, 19.1, 19.0,1+.1, 1+.0,...


11/60

20.0, 19.1, 19.0

20.0, 19.1, 19.0

20.0, 19.1, 19.0

20.0, 19.1, 19.0

#o!pare 3bBe"ts20.0, 19.1, 19.0,1+.1, 1+.0,...

Re6eren"e Model S"ale

#over Di!ension20.0, 19.1, 19.0,1+.1, 1+.0,...

/ar #-e"*er

Dra(in) S!bol Mana)er

Detail Mana)er

/ase Plate ppli"ator20.0, 19.1, 19.0,1+.1, 1+.0,...

n"-or Rod $ools20.0, 19.1, 19.0,1+.1, 1+.0,...
https://extranet.tekla.com/BC/tekla-structures-en/extensions/CompareObjectshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/reference-model-scalehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/coverdimensionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/barcheckerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawingsymbolmanagerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/DetailManagerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/base-plate-applicatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/anchor-rod-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/anchor-rod-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/base-plate-applicatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/DetailManagerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawingsymbolmanagerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/barcheckerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/coverdimensionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/reference-model-scalehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/CompareObjects


12/60

20.0, 19.1, 19.0

20.0, 19.1, 19.0

20.0, 19.1, 19.0

/ea! Extruder20.0, 19.1, 19.0,1+.1, 1+.0,...

&ode dder20.0, 19.1, 19.0,1+.1, 1+.0,...

#IP Rein6or"e!ent20.0, 19.1, 19.0,1+.1, 1+.0,...

%olu!e o6 bolt -oles20.0, 19.1, 19.0,1+.1, 1+.0

Ere"tion Dra(in)20.0, 19.1, 19.0,1+.1, 1+.0,...

#an Dra(in) Rotation

en)t- o6 ed)e preparatio

Folded Part Dra(in)s20.0, 19.0, 1+.1,1+.0, 1.0

tta"- Part Wi=ard

5 Part Sele"tion20.0, 19.1, 19.0,1+.0, 1.0

Model #-e"*er Suite20.0, 19.1, 19.0,1+.1, 1+.0

Weldin) $ools20.0, 19.1, 19.0,1+.1, 1+.0,...
https://extranet.tekla.com/BC/tekla-structures-en/extensions/beam-extruderhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/node-adderhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/cip-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/volume-of-bolt-holeshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/erection-drawinghttps://extranet.tekla.com/BC/tekla-structures-en/extensions/can-drawing-rotationhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/length-of-edge-preparationshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/folded-part-drawingshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/attach-part-wizardhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ga-part-selectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/model-checker-suitehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/welding-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/welding-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/model-checker-suitehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ga-part-selectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/attach-part-wizardhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/folded-part-drawingshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/length-of-edge-preparationshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/can-drawing-rotationhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/erection-drawinghttps://extranet.tekla.com/BC/tekla-structures-en/extensions/volume-of-bolt-holeshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/cip-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/node-adderhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/beam-extruder


13/60

19.1, 19.0

3@set $ools20.0, 19.1, 19.0,1+.1, 1+.0,...

pex


14/60

19.1, 19.0

19.1, 19.0

19.1, 19.0

/M$E# I!port19.1, 19.0, 1+.1,1+.0, 1.0

Fl$-rou)-19.1, 19.0, 1+.0,1.0

I!port Point #loud

I8/ea! Rein6or"e!ent19.1, 19.0, 1+.0,1.0.x, 1.0...

Ed)e Rein6or"e!ent Wit-19.1, 19.0, 1+.1,1+.0.x, 1+.0...

#-e"* nd Mana)e Rebar

#olu!n S"-eduler19.1, 19.0, 1+.1,1+.0, 1.0

Wraparound Di!ensionin)

Rebar


15/60

19.1, 19.0

19.1, 19.0

19.1, 19.0

19.1, 19.0

7D"onnexion Devi"e Install19.1, 19.0, 1+.1,1+.0 R#, 1+....

#rane #onsole19.1, 19.0, 1+.1,1+.0, 1.0

&o paint area

rra tools

P-ases and ots to $as*s19.1, 19.0, 1+.1,1+.0, 1.0,...

Dra(in) snaps-ot "reator

uto /olt

#ap Plate Detail19.1, 19.0, 1+.1,1+.0, 1.0

Pipe Doubler Plate19.1, 19.0, 1+.1,1+.0, 1.0

Rin) Plate19.1, 19.0, 1+.1,1+.0, 1.0
https://extranet.tekla.com/BC/tekla-structures-en/extensions/3dconnexion-device-installerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/crane-consolehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/no-paint-areahttps://extranet.tekla.com/BC/tekla-structures-en/extensions/array-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/phases-and-lots-to-taskshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawing-snapshot-creatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/autobolthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/cap-plate-detailhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/pipe-doubler-platehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ring_platehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ring_platehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/pipe-doubler-platehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/cap-plate-detailhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/autobolthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawing-snapshot-creatorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/phases-and-lots-to-taskshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/array-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/no-paint-areahttps://extranet.tekla.com/BC/tekla-structures-en/extensions/crane-consolehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/3dconnexion-device-installer


16/60

19.0, 1+.1, 1+.0

19

19

19.0, 1+.1, 1+.0

19

19

[email protected], 19.0, 1+.1,1+.0, 1.0

#-annel to "-annel bolted

19.1, 19.0, 1+.1,

1+.0, 1.0

/olt Was-er #-e"*er

Part #ut Revie(19.0, 1+.1, 1+.0,1.0, 1C.1,...

Support $ool 19.0, %ersionindependent

Fra!e"ad Inte)ration

dvan"ed 3ption #-an)es

Rebar 5roup Editin) $ool

5 Dra(in)s #opier

S-orin) to(er and de"* su

#op 4nite"-ni* saved set%ersionindependent
https://extranet.tekla.com/BC/tekla-structures-en/extensions/offsethttps://extranet.tekla.com/BC/tekla-structures-en/extensions/channel-to-channel-bolted-connectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/BoltWasherCheckerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/part-cut-reviewhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/support-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/Framecad_Integrationhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/advanced-option-changeshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/rebar-group-editing-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ga-drawing-copierhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/shoringtowerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/UTSettingRenamehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/UTSettingRenamehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/shoringtowerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ga-drawing-copierhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/rebar-group-editing-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/advanced-option-changeshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/Framecad_Integrationhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/support-toolhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/part-cut-reviewhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/BoltWasherCheckerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/channel-to-channel-bolted-connectionhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/offset


17/60

1+.1, 1+.0

1+.1, 1+.0, 1.0

1+.1, 1+.0, 1.0

1+.0, 1.0

Dra(in) Detail Mana)er1+.1, 1+.0, 1.0,%ersion inde...

Wall #onne"tion #o!pone

#usto! #o!ponent Dialo)1+.1, 1+.0, %ersionindependen...

Data Extra"tor%ersionindependent, 1+.1,1....

Re6eren"e 3bBe"t I!port S

%ersion

independent, 1+.1,1+....

Extend

Dra(in) Previe(

#onvert PDF to Re6eren"e1+.1, 1+.0, 1.0.x,1.0

#elsa Steel M Export
https://extranet.tekla.com/BC/tekla-structures-en/extensions/drawing-detail-managerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/wall-connection-componentshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/custom-component-dialog-editorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/data-extractorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/reference-object-importshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/extendhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawing-previewhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/pdf-to-reference-objecthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/celsa-steel-xml-exporthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/celsa-steel-xml-exporthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/pdf-to-reference-objecthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawing-previewhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/extendhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/reference-object-importshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/data-extractorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/custom-component-dialog-editorhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/wall-connection-componentshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/drawing-detail-manager


18/60

1+

1.0 SR7, 1.0

1.0, 1C.1, 1C.0

1

1

1

Point #loud 2 Re6eren"e Fil%ersionindependent

Modi6 Wall1+.0, 1.0, 1C.1,

1C.0

For!(or* #o!ponents

4nite"-ni* Weld Mes- #on%ersionindependent

Dra(in) /ea! End Mar* $1+.0, 1.0 SR7, 1.0SR1, 1.0...

Materials


19/60

1

1

1

1

1.0, 1C.1, 1C.0

1.0, 1C.1, 1C.0

1C.1, 1C.0

1C.1, 1C.0

Rebar Di!ension $ools

Re!ote SD&F%ersionindependent

$iltup aout

Mobile &avi)ation $oolbar

Installation Seuen"e

Part 4ser ttribute Setup :%ersionindependent, 1.0

Step I)es #onverter%ersionindependent

Rin) rein6or"e!ent

Sand(i"- ties

SFS Inte" Fstdon%ersionindependent

aout Mana)er :$ri!ble;

Dire"tor /ro(ser
https://extranet.tekla.com/BC/tekla-structures-en/extensions/rebar-dimension-toolshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/RemoteSDNFhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/tiltup-layouthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/MobileNavigationToolbarhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/installation-sequencehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/PartUserAttributeSetuphttps://extranet.tekla.com/BC/tekla-structures-en/extensions/step-iges-converterhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ring-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sandwich-tieshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sfs-intec-faestdonhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/layout-managerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/directory-browserhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/directory-browserhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/layout-managerhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sfs-intec-faestdonhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sandwich-tieshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/ring-reinforcementhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/step-iges-converterhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/PartUserAttributeSetuphttps://extranet.tekla.com/BC/tekla-structures-en/extensions/installation-sequencehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/MobileNavigationToolbarhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/tiltup-layouthttps://extranet.tekla.com/BC/tekla-structures-en/extensions/RemoteSDNFhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/rebar-dimension-tools


20/60

1C.1

1.0, 1C.1, 1C.0

1C.1, 1C.0

1C

1.0, 1C.1, 1C.0

easi8ed)e

&a!varan #IP #o!ponent

Rapid Prototpe #onverter%ersionindependent

#35 Di!ensionin)

Slopin) Slab Draina)e

5eneral E!beds
https://extranet.tekla.com/BC/tekla-structures-en/extensions/easi-edgehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/namvaran-cip-componentshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/rapid-prototype-converterhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/cog-dimensioninghttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sloping-slab-drainagehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/general-embedshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/general-embedshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/sloping-slab-drainagehttps://extranet.tekla.com/BC/tekla-structures-en/extensions/cog-dimensioninghttps://extranet.tekla.com/BC/tekla-structures-en/extensions/rapid-prototype-converterhttps://extranet.tekla.com/BC/tekla-structures-en/extensions/namvaran-cip-componentshttps://extranet.tekla.com/BC/tekla-structures-en/extensions/easi-edge


21/60

Quality Modifed Rating Downloads

Experi!ental 70 un 201G 70



Experi!ental 2H un 201G H7

Experi!ental 1H un 201G 2++


$e*la pproved 12 un 201G G22

Experi!ental 11 un 201G 11+C


Experi!ental 09 un 201G 19C1

Experi!ental 0G un 201G 1H9

:0;

:0;

:1;

:0;

:7;

:19;

:0;

:+;

:C;

:10;

:H;


22/60

Experi!ental 07 un 201G HG9

Experi!ental 02 un 201G 12C


Experi!ental 70 Ma 201G 1C1

Experi!ental 22 Ma 201G G02

Experi!ental 22 Ma 201G 1+H

$e*la pproved 20 Ma 201G H++H

$e*la pproved 20 Ma 201G C27

Experi!ental 1G Ma 201G 1+202

Experi!ental 1G Ma 201G H9

:;

:1;

:1;

:0;

:0;

:0;

:9;

:2;

:12;

:0;


23/60

$e*la pproved 09 Ma 201G 110+

Experi!ental 09 Ma 201G 1H9

Experi!ental 0+ Ma 201G 17+9

Experi!ental 0H Ma 201G 1+20

Experi!ental 02 Ma 201G 192H

Experi!ental 70 pr 201G +

$e*la pproved 2+ pr 201G CC+

Experi!ental 2H pr 201G 9+

Experi!ental 2H pr 201G 2H+7

Experi!ental 27 pr 201G 92H

Experi!ental 21 pr 201G 1CC1

:G;

:7;

:;

:2;

:H;

:0;

:+;

:7;

:H;

:+;

:7;


24/60

Experi!ental 19 pr 201G HCH

Experi!ental 19 pr 201G H+1

Experi!ental 19 pr 201G 112+

Experi!ental 1 pr 201G 20C0

Experi!ental 1C pr 201G H

Experi!ental 1C pr 201G C0

Experi!ental 1H pr 201G 7C+

Experi!ental 1G pr 201G 7722

:1;

:2;

:2;

:;

:G;

:7;

:1;

:H;


25/60

Experi!ental 1G pr 201G 2GG1

Experi!ental 1G pr 201G 177H

Experi!ental 10 pr 201G 7+C

Experi!ental 10 pr 201G 77

$e*la pproved 10 pr 201G H72

Experi!ental 10 pr 201G 11C


$e*la pproved 0 pr 201G H7H7

Experi!ental 0G pr 201G GH0

:1H;

:H;

:2;

:1;

:0;

:0;

:1;

:1H;

:2;


26/60

$e*la pproved 07 pr 201G 977



$e*la pproved 02 pr 201G 9H


Experi!ental 02 pr 201G +9

Experi!ental 02 pr 201G 1+97


Experi!ental 01 pr 201G +99

:;

:0;

:0;

:;

:1;

:0;

:11;

:12;

:7;


27/60


$e*la pproved 01 pr 201G 1G

Experi!ental 2G Mar 201G 111+

Experi!ental 2G Mar 201G 117H

Experi!ental 2G Mar 201G 1++0

Experi!ental 2G Mar 201G 197C

$e*la pproved 21 Mar 201G 19

$e*la pproved 21 Mar 201G CG

Experi!ental 21 Mar 201G H2G

:H;

:0;

:7;

:H;

:2;

:10;

:7;

:1;

:H;


28/60

Experi!ental 21 Mar 201G H7G

Experi!ental 19 Mar 201G 11C

Experi!ental 19 Mar 201G 17

Experi!ental 19 Mar 201G 10+


Experi!ental 19 Mar 201G 12+0

Experi!ental 19 Mar 201G 1HCH

Experi!ental 1+ Mar 201G 12H90

$e*la pproved 1 Mar 201G 2HG9

$e*la pproved 1 Mar 201G 21G9

:0;

:7;

:H;

:2;

:1;

:1;

:1;

:7H;

:;

:2;


29/60

$e*la pproved 1 Mar 201G 7070

Experi!ental 1 Mar 201G +C2

Experi!ental 1 Mar 201G HC+

Experi!ental 1 Mar 201G 9H

Experi!ental 1 Mar 201G 1+2C

Experi!ental 1G Mar 201G H+

$e*la pproved 1G Mar 201G +09

Experi!ental 1G Mar 201G 1120

Experi!ental 1G Mar 201G 129C

Experi!ental 1G Mar 201G 2CH



:H;

:H;

:2;

:7;

:C;

:2;

:2;

:G;

:2;

:C;

:C;

:H;


30/60

Experi!ental 17 Mar 201G G79

Experi!ental 17 Mar 201G +92

Experi!ental 17 Mar 201G 2C92

Experi!ental 17 Mar 201G +29


Experi!ental 17 Mar 201G +G

Experi!ental 17 Mar 201G 2+7

Experi!ental 17 Mar 201G H+0

Experi!ental 17 Mar 201G +HC


Experi!ental 17 Mar 201G G209

:1;

:2;

:17;

:+;

:1;

:7;

:1;

:0;

:1;

:7;

:1H;


31/60

Experi!ental 17 Mar 201G 7+1H

Experi!ental 17 Mar 201G HG+


Experi!ental 12 Mar 201G GH



Experi!ental 12 Mar 201G 1H7

Experi!ental 12 Mar 201G 27C7

:17;

:1;

:2;

:0;

:G;

:0;

:G;

:G;


32/60



Experi!ental 12 Mar 201G 17+C

Experi!ental 11 Mar 201G C01

Experi!ental 11 Mar 201G 1GH0



Experi!ental 11 Mar 201G 27CG

Experi!ental 10 Mar 201G H91

Experi!ental 10 Mar 201G 1H7+


Experi!ental 2+ Feb 201G 29++

:G;

:1;

:2;

:0;

:2;

:0;

:0;

:G;

:2;

:2;

:G;

:1;


33/60

Experi!ental 2+ Feb 201G 210

Experi!ental 2+ Feb 201G 170C

Experi!ental 11 Feb 201G 72G

Experi!ental 27 an 201G 711

Experi!ental 1G an 201G 9GC

Experi!ental 17 an 201G G99

Experi!ental 1G De" 2017 HCG2

Experi!ental 2+ &ov 2017 700

Experi!ental 21 &ov 2017 217C

:1;

:0;

:2;

:0;

:2;

:2;

:;

:1;

:2;


34/60

Experi!ental 20 &ov 2017 1C9

Experi!ental 71 3"t 2017 191+

Experi!ental 2+ 3"t 2017 C9H

Experi!ental 11 3"t 2017 0G

Experi!ental 09 3"t 2017 G90

Experi!ental 0G 3"t 2017 200

Experi!ental 2C Sep 2017 +9+

Experi!ental 19 Sep 2017 H90

Experi!ental 19 Sep 2017 1017

Experi!ental 1+ Sep 2017 110G

Experi!ental 1+ Sep 2017 1++H

:0;

:+;

:2;

:0;

:0;

:1;

:7;

:1;

:1;

:G;

:9;


35/60

Experi!ental 1+ Sep 2017 21C9

Experi!ental 1C Sep 2017 2CC0

$e*la pproved 1C Sep 2017 +1H

Experi!ental 1C Sep 2017 +G7



Experi!ental 1C u) 2017 100+

$e*la pproved 1C u) 2017 2G0G

Experi!ental 1C u) 2017 217C

$e*la pproved 1C u) 2017 1HCC

:9;

:;

:0;

:7;

:1;

:7;

:2;

:H;

:7;

:2;


36/60

Experi!ental 1H u) 2017 22+G

Experi!ental 1G u) 2017 110+

Experi!ental 2C ul 2017 H2H

Experi!ental 22 ul 2017 HC+

$e*la pproved 20 un 2017 G92

Experi!ental 12 un 2017 ++

$e*la pproved 27 Ma 2017 707

Experi!ental 1H pr 2017 12+

Experi!ental 2H Mar 2017 G2C

Experi!ental 17 Mar 2017 1CH

Experi!ental 0 Mar 2017 H1

:;

:1;

:2;

:0;

:2;

:0;

:1;

:H;

:G;

:0;

:0;


37/60

Experi!ental 1C Feb 2017 CH1C

Experi!ental 19 De" 2012 1G

$e*la pproved 2+ &ov 2012 79H2

Experi!ental 1C &ov 2012 129G

Experi!ental 09 &ov 2012 2G

Experi!ental 09 3"t 2012 720C

Experi!ental 0G 3"t 2012 190C

Experi!ental 01 3"t 2012 2HC1

Experi!ental 0G Sep 2012 1+9

:1H;

:0;

:21;

:7;

:1;

:2;

:2;

:+;

:0;


38/60

Experi!ental 1 pr 2012 20

Experi!ental 70 Mar 2012 2H1

Experi!ental 70 Mar 2012 GH0

Experi!ental 2C Mar 2012 +0

Experi!ental 1H Mar 2012 G71

Experi!ental 71 an 2012 +90

Experi!ental 1 an 2012 9C

$e*la pproved 2H &ov 2011 HHG

Experi!ental 0 3"t 2011 1H2C

Experi!ental 0 ul 2011 10G+

:G;

:0;

:1;

:0;

:1;

:2;

:G;

:2;

:C;

:H;


39/60

Experi!ental 71 Ma 2011 2H1

Experi!ental 2G Ma 2011 7GG

Experi!ental 10 Ma 2011 197

Experi!ental 0C pr 2011 79C

Experi!ental 0C pr 2011 H99

Experi!ental 29 Mar 2011 129+

Experi!ental 10 Mar 2011 29H1

Experi!ental 1G Feb 2011 297

Experi!ental 1G Feb 2011 7G2

Experi!ental 11 Feb 2011 1GH

Experi!ental 10 Feb 2011 70

Experi!ental 09 Feb 2011 2

:1;

:0;

:0;

:0;

:H;

:+;

:H;

:1;

:0;

:0;

:0;

:2;


40/60

Experi!ental 0G Feb 2011 17G


Experi!ental 0G Feb 2011 27C


Experi!ental 0G Feb 2011 1C+

$e*la pproved 0G Feb 2011 H0C

:0;

:1;

:1;

:7;

:1;

:0;


41/60

Desription

$-e (raparound pipe 6ootprint extension "an be used to dra( t-e 6ootprints o6 "onne"tin) pipes iun(rapped part dra(in)s.

Si!pli'ed IF# export to Revit (it- so6t(are spe"i'" settin)s. $-is export "an be used (it- t-e /IM

Publis-er to set up :s"-eduled; exports o6 !ultiple !odels at on"e.Export to Revit previouslbelon)ed to t-e Export to So6t(are pa"*a)e.needed ot-er 'les. PDMS appli"ation (ill read 'les and "reate PDMS obBe"ts. Installation 'le"reates $e*la Stru"tures appli"ation and PDMS pa"*a)e =ip 'le in"ludes needed 'les 6or PDMS.&oteJ $-is is still in beta p-ase and under develop!ent. Feedba"* to addressJ

For! Fa"e #reator is used to add sur6a"e treat!ent representation o6 6or!(or* to part sur6a"es.$-is enables t-e user to )et ver a""urate reports o6 t-e 6or!(or* areas in t-eir !odel, ui"*land easil.

$-is tool is developed to -elp $e*la Stru"tures "usto!ers to "usto!i=e 'le na!es. De6ault

'les are bein) "reated (it- onl Pie"e Mar* (-ereas so!e "usto!ers (ould li*e to -ave ProBe"t&u!ber, Pro'le and Material in 'le na!es. It is all possible (it- t-is ne( tool.

$-is extension provides a WSIW5 :(-at ou see is (-at ou )et; previe( o6 a sele"tion o6dra(in)s and provides options to export t-e! as PDF 'les, save t-e! as plot 'les and to printt-e! on a sele"ted printer.

s oo !por s sur a"e !o e s ro! e a v o e a ru" ures an a" . e !a n ea ures ot-e appli"ation areJN Settin) t-e "oordinate trans6or!ation bet(een $e*la #ivil and $e*laStru"tures, N I!portin) desired sur6a"es 6ro! $e*la #ivil to $e*la Stru"tures as trian)le net(or*s, N

N

toolbar to split and>or "reate "ouplers at t-e lo"ation o6 split bet(een t(o rebars. lso addin)

end an"-ors to rebar ends is no( possible. 3n"e t-e "ouplers and>or an"-ors are "reated t-e "anbe s-o(n in dra(in)s and "an be inuired b reports.

$-is tool allo(s users to easil pi"* 6a"es or lines in t-e !odel to ui"*l !easure distan"es 6or!odel revie( and "-e"*in) purposes. $-e all redu"es t-e nu!ber o6 "li"*s reuired to )etdi!ensional values "o!pared to t-e 6ree di!ensionin) tools in t-e !odel. $-e di!ensional valuesare dra(in) alon) t-e line or all o6 t-e ed)es o6 a 6a"e pi"*ed as te!porar )rap-i"s and "an easilbe re!oved b Oupdatin) or Oredra(in) a t-e "urrent vie( in t-e !odel.

$-is tool allo(s users to rapidl "-e"* individual properties o6 !ultiple sele"ted obBe"ts in t-e!odel at on"e vs. usin) reports, t-e !ini toolbar, or "usto! inuir tool alone. n !odel obBe"ttpes t-at -ave user de'ned attributes and report properties "an be ueried. $-e user "an alsosave a(a presets 6or di@erent obBe"t tpes. $-is speeds up t-e revie( and "-e"*in) o6 ite!s int-e !odel vs. -avin) to revie( and "-e"* ite!s on dra(in)s. %10.2 Fixed bea! parts s-o(in)label even (it- end elevations un"-e"*ed.

Set o6 "o!ponents to !odel trans!ission to(ers. #reates a !odel te!plate Q$rans!ission $o(erQt-at in"ludes all t-e "o!ponents and tpi"al settin)s. Please loo* at t-e do"u!entation atta"-edas (ell as t-e -elp pa)es in $e*la 4ser ssitan"e to )et !ore in6or!ation about -o( to use t-is"o!ponents.


42/60

#opies uda 6ro! one 'eld to anot-er 6or ea"- obBe"t sele"ted or b 'lter

$-e /IM Publis-er per6or!s a bat"- export o6 !ultiple !odels and t-eir dra(in)s in di@erent6or!ats. vailable 6or!ats are 7D DW5, IF#, D5& and Revit 6or !odels, and DW5 and DF 6ordra(in)s. dd as !an !odels ou need, "-oose (-i"- 'lters to use and export t-e! (it- aninstalled $e*la Stru"tures version startin) 6ro! version 1+.0. ou "an do t-is auto!ati"all durin)t-e ni)-t so t-at everone in t-e tea! (ill -ave 6res- !odels in t-e !ornin).

$-e #onstru"tion Seuen"er is intended to provide ProBe"t Mana)ers, Steel Ere"tors and #on"rete#ontra"tors (it- a /uildin) In6or!ation Modelin) based tool to assist (it- plannin) and exe"utiono6 onsite a"tivities.

#reates laout points 6or sele"ted and>or 'ltered !odel obBe"ts based on solid )eo!etr. Wor*s osele"ted obBe"t or "an sear"- t-e !odel 6or 'ltered tpes. 4ser "an spe"i6 (-i"- laout pointsettin)s to use 6or ea"- appli"ation o6 points. Wor*s 6or "olu!ns, bea!s, rein6or"e!ent, 6ootin)s,pad 6ootin)s, and rein6or"e!ent.

$-e $e*la Stru"tures>E$/S plu)in allo(s t-e user to easil trans6er t-e stru"tural !odel data 6ro

$e*la Stru"tures E$/S, and to insert a E$/S !odel into a blan* $e*la Stru"tures !odel.

$-e "onne"tion pla"es (all s-oe, an"-or bolt and additional rein6or"e!ent. It is tpi"all usedbet(een pre"ast stair"ase (all panels.

Wit- Inter)rap-s PDS appli"ation i6 a proBe"t is started in !etres due to real8(orld "oordinateissues t-en all t-e SD&F i!ports -ave also to be in !etres rat-er t-an t-e nor!al !illi!etre"onversion. $-is appli"ation "onverts t-e reuired di!ensions 6or all "ases and (or*s (it-J Pa"*et00 8 $itle Pa"*et Pa"*et 10 8 inear !e!bers Pa"*et 20 8 Plate ele!ents Pa"*et 22 8


43/60

$-e rea Rein6or"e!ent plu)in auto!ati=es t-e pro"ess o6 rein6or"in) (alls and slabs.

$-is tool allo(s t-e user to s-rin* "ontourplate tped obBe"ts.

$-e Extension 5aller provides an eas to use (a to 'nd, laun"- and or)ani=e extensions. $-e)aller is "ontext dependent, so it s-o(s dra(in) plu)ins and !a"ros (-en a dra(in) is open and!odel !a"ros ot-er(ise. In addition to t-e extensions t-at are auto!ati"all dis"overed, "usto!pro)ra!s "an be added to t-e )aller !anuall.

$-e Ere"tion Seuen"er is used to de'ne t-e order o6 ite!s to be ere"te"ted. Reports andani!ations "an t-en be produ"ed and delivered to ProBe"t Mana)ers or Site #re(s

$-is appli"ation assi)ns user de'ned attributes to an !odel obBe"t base on 'lters and rules. It "aalso set t-e nu!berin) pre'x and start nu!ber i6 entered.

$-is setup "ontains tools t-at "ater to t-e 6ollo(in) se)!entsJ8 1; #IP 2; 5ratin) 7; /uilt up G; PE/H; Dra(in) $ools C; Material


44/60

$-is extension allo(s "opin) sele"ted obBe"ts b rotation (it- 7 points

$-is extension allo(s !ovin) sele"ted obBe"ts b rotation (it- 7 points.

$-e Rebar Release Mana)er allo(s users to !ore a""uratel !ana)e rebar releases be6orereleasin) 6or 6abri"ation. 4sers "an status rebar, assi)n "oatin)s, assi)n or re!ove rebar toreleases, and export rebar in6or!ation to Soule and aSa rebar MIS sste!s.

3/ :or .3/; is a )eo!etr de'nition 'le 6or!at 'rst developed b Wave6ront $e"-nolo)ies. $-e 'l

6or!at is open and -as been adopted b ot-er 7D )rap-i"s appli"ation vendors. $-e 6or!at is(idel used 6or visuali=ation, ani!ation and render so6t(are. $-is extension exports a $e*laStru"tures !odel to 3/ 6or!at.

Mat"- lines are tpi"all pla"ed on plan dra(in)s to desi)nate brea*s poinits bet(een plandra(in) s-eets. 4sers o6 t-is tool "an !ore ui"*l pla"e !at"- lines t-at are "usto!i=able in linetpe and t-i"*ness.

$-is Extension "reates radius and dia!eter di!ensions in dra(in)s. It "an "reate auto!ati"di!ensions 6or "urved !e!bers as (ell, b Bust pi"*in) a "urved !e!ber and a point to di!ensio

in t-e "urve.

set o6 plu)ins and "onne"tions 6or t-e asse!blies and send t-at databa"* to be i!ported into $e*la Stru"tures. $-is is all done usin) a )eneri" M 'le 6or!at. $-is noallo(s partners to si!pl Bust deal (it- parsin) an M 'le vs.


45/60

ppli"ation 6or !ana)in) void -ole reservations :i6" void obBe"ts; "reated (it-


46/60

"orner "onne"tion, (-i"- pla"es 48bars and additional re"esses 6or s-ear 6or"e trans6er.

$-is plu)in "reates a "onne"tion bet(een t(o "on"rete (alls.

$-ese i!port>export extensions are desi)ned to inte)rate $e*la Stru"tures (it- #S#s Fastra*/uildin) desi)ner and 3rion desi)n so6t(are. $-e Fastra* lin*s allo( round trippin) o6 in6or!ationbet(een $e*la Stru"tures and Fastra* /uildin) Desi)ner. $-e i!port (ill "reate $e*la Stru"turesbea!s, "olu!ns, slabs, s-ear (alls et". I6 t-e neutral 'le "ontains updates to a previousl i!porte!odel t-e i!port (ill "o!pare t-e i!port 'les "ontents (it- t-e existin) !odel and s-o( t-e us

t-e di@eren"es. $-is )ives t-e user "ontrol over (-i"- parts o6 t-e !odel are updated. $-e exportto Fastra* produ"es a 'le in t-e "xl 6or!at. $-is 'le "an be sent to Fastra* /uildin) Desi)ner toupdate t-e Desi)n !odel or "reate a ne( Fastra* !odel based on t-e $e*la Stru"tures p-si"al!odel. $-e extension "an be used to export t-e entire $e*la Stru"tures !odel or a sele"ted subseo6 t-e !odel.

#reates a double tee bea! (it- rid)e and -as an option 6or slab t-i"*enin) in t-e end. Dialo) textare "orre"tl translated onl i6 Finnis- environ!ent is installed.

$-is tool is used to assi)n seuential nu!bers to !odel parts. $-e nu!bers are stored as userde'ned attribute :4D; values. $-e tool -as settin)s 6or e.). start nu!ber, step value, pre'x, et".

$-is "o!ponent "uts t-e -ollo( "ore slab ends to desired len)t- and adds t-e sea! rein6or"e!enbet(een t-e -ollo( "ore slabs and an"-ors t-e rebars inside t-e ed)e bea!s.

Stru"tures Xbea!s or -ollo( "ore slabs "reated (it- $e*la X"o!ponents. $-is extension uses t-eQ


47/60

Plu)in 6or rein6or"in) tpi"al (all panel "ases

$ s too s nten e or "reat on an !o "at on o oors u o pre"ast )ree an o o( "oreslabs et". $-e Aoor !a "ontain several laers li*e pre"ast slabs, insulation and>or "ast in pla"e

toppin). ou (ill )et !ore value 6ro! t-is tool (-en t-e boundar o6 t-e Aoor in non8re"tan)ular,"ontains one o6 !ore openin)s splittin) slabs in !an pie"es and>or t-e slab (idt-s "ant be"onstant on (-ole area o6 t-e Aoor.

$-is tool allo(s steel detailers and en)ineers to ui"*l appl t-e appropriate in positiondi!ensions 6or =pan stairs in"ludin) riser, run, and dia)onal spa"in) in6or!ation.

#reates )eneral arran)e!ent dra(in)s o6 "usto! and sste! "o!ponents in t-e !odel dire"tl6ro! t-e !odel based on "usto!i=able dra(in) settin)s.

WR&I&5J Dont use on sse!bl dra(in)s t-at ou lin* to Multi Dra(in)s. $-is tool allo(s usersto "reate a "o!bined part !ar* "allout 6or parts on asse!bl dra(in)s (-ere t-e out o6 t-e box"o!bine part !ar*s doesnt a"-ieve t-e desired result. $-e user sele"ts a part in t-e asse!bldra(in) and t-e tool (ill auto!ati"all s"an t-rou)- t-e vie( t-e part (as sele"ted in and it (ill'nd t-e uantit o6 parts (it- t-e sa!e part !ar* t-at appear in t-at vie(. $-e user t-en pi"*s topoints (-i"- represent t-e lo"ation o6 t-e !ar* leader and t-en t-e pla"e!ent point o6 t-e !ar*text. $-e part !ar* "ontent (ill t-en displa t-e uantit o6 t-at part !ar* 6ound in t-e vie( :nott-e entire dra(in);, t-en O8O, and ends (it- t-e part !ar* itsel6.

$-ese tools allo( users to ui"*l add bolt lo"ation di!ensions in s-op and ere"tion dra(in)s.

Si!pl pi"* t-e bolt )roup, t-en t-e part t-e di!ensions (ill be ali)ned to, and optionall are6eren"e point 6or t-e bolt di!ensions to start 6ro! and t-e tool (ill auto!ati"all add all o6 t-eand di!ensions 6or t-e bolts in t-at )roup on t-e dra(in).

Pa"*a)in) $ool (ill -elp to "reate, send and tra"* pa"*a)es o6 dra(in)s, 'les, reports and ot-e!odel output.

i6tin) u) allo(s t-e user to de'ne a bolted li6tin) lu)s di!ensions and pla"es eit-er t-e parts o6t-at lu), or Bust t-e set o6 -oles reuired to "onne"t it, auto!ati"all onto t-e top 6a"es o6 sele"te

bea!s in t-e !odel based on t-e "entre o6 )ravit o6 t-e bea! asse!bl. i6tin) u) Mana)erallo(s t-e user to appl li6tin) lu)s to appropriate steel bea!s, and 6a"ilitates *eepin) t-e! in t-appropriate lo"ation as t-e !e!bers t-e are atta"-ed to "-an)e. It also allo(s t-e user to !odi6sele"ted )roups o6 li6tin) lu)s usin) ne( settin)s.

$-is extension is ai!ed to -elp t-e detailin) o6 t-ree plate bea!s, used in !an industries su"- uo@s-ore and PE/. Model and detail our t-ree plate bea!s as I bea!s and use t-is "o!ponent to"reate t-e t-ree plates read to be sent to 6abri"ation. &ote t-at !odi'"ations in t-e I bea!, su"-as pro'le or )eo!etr "-an)es, (ill update t-e t-ree plates. /ut i6 "onne"tions a@e"tin) t-e beasu"- as "-an)in) nu!ber o6 bolts in a spli"e, it (ont update t-e dire"tl t-e plates, ou (ill need

to open t-e dialo) and "li"* !odi6. $-is (or*s as (ell (it- tapered bea!s.


48/60

$-is appli"ation i!ports and exports t-e p-ase list o6 t-e p-ase !ana)er

4se t-is extended appli"ation to save and !ana)e t-e (or* planes in a !odel.

4se t-is tool to !er)e identi"al (eld !ar*s in dra(in)s.

$-is extension in"ludes t(o toolsJ Pattern ine Plu)in (-i"- allo(s user to "reate "usto! lines indra(in)s, and Pattern ine Editor (-i"- allo(s t-e user to "reate and !odi6 t-ose "usto! lines(-i"- (ill be used b t-e pattern line plu)in.

4se t-is tool to dra( t-e (eld pat- o6 !odel (eld in t-e dra(in)s. $-is tool uses pattern lines todra( t-e (eld pat-s, i6 ou need to de'ne our o(n ou "an use t-e pattern line editor.

$-is appli"ation "reates a list o6 !es-es in a )rap-i"al 6or!at. $-e !es-es are sorted and !es-eso6 t-e sa!e tpe "o!bined to one standard !es-. $-e appli"ation is also opti!i=in) t-e pla"e!eo6 t-e individual !es-es to 't better on a standard !es- si=e pla"e-older.

Wall Ele!entation #o!ponents are !eant to be used to !odel pre6abri"ated "on"rete (allstru"tures, eit-er solid (alls, double (alls or sand(i"- (alls. Wall Ele!entation #o!ponents are aset o6 seven plu)8in (-i"- s-all be used to)et-erJ Wall !ana)er, Sea! "ontroller, Ed)e "ontroller,3penin) "ontroller, Detailin) "ontroller, #orner -andler uto Ele!entation.

$-is appli"ation allo(s t-e user to i!port


49/60

$ool 6or settin) de6ault 6ont to be used in dra(in)s.

4se t-is tool to "reate spe"ial part s!bols 6or parts in a dra(in).

4se t-is tool to "reate "urved bea!s in t-e sa!e !anner as t-e t(o8point "urved bea! "o!!anbut (it- t-e end result o6 a pol8bea!.

$-e bolt "enterline export aids in exportin) asse!blies in DF or DW5 6or!at 6or use (it-6abri"ation ualit assuran"e sste!s. 4sin) t-is extension, a sur6a"e export o6 t-e asse!bl part

and a separate export representin) t-e "enter lines o6 bolt -oles in t-e asse!bl are )enerated 6oea"- sele"ted asse!bl. So!e "o!!er"iall available laser s"annin) sste!s and so6t(are "anuse t-ese 'les as a basis 6or "o!parin) t-e 6abri"ated asse!bl and bolt -oles a)ainst t-e !odeldesi)n 6or ualit assuran"e and "-e"*in).

#lipper is tool 6or !odel navi)ation. #lipper uses "lip planes and (or* plane adBust!ent 6orsplittin) !odel to s!aller pie"es 6or visuali=ation and !odellin). It is possible to save "lip boxesand sli"es 6or reuse. 4sin) tool "-an)es pi"*in) settin) 6ro! vie( to (or* plane.

ex"-an)e o6 in6or!ation bet(een $e*la Stru"tures and Inter)rap-s S!artY 7D desi)n sste!.#urrent produ"t "o!patibilit is $e*la Stru"tures %19.0 and %19.1, (it- S!artPlantZ 7D 2011 SP1S!artMarineZ 7D 2011SP1 and S!art7DZ 201G. Do(nload t-e extension do"u!entation 6or !or

3@s-ore Rin) Plate (ill "reate rin) plates and "ap plates (-i"- are needed at t-e "onne"tion o6bea! Aan)es and round pipe "olu!ns. 3@s-ore Rin) Plate (ill onl "reate t-e rin) plate and (ill

not "reate "onne"tion bet(een t-e (eb o6 t-e bea!s and t-e rin) plate or t-e (eb and t-e pipe.

4se t-is tool to in"lude additional in6or!ation about t-e lo"ation o6 an asse!bl in asse!bldra(in)s b indi"atin) t-e nei)-borin) )rids and>or t-e "o!pass dire"tions in asse!bl vie(s.

ppli"ation to "reate bea!s, "olu!ns, bra"es, plates, et". based on Mi"roso6t Ex"el data s-eet:#S% 'le;. %ideo in"luded to see -o( to use t-e appli"ation.

4se t-is tool to )at-er si!ilar asse!blies di!ensions to)et-er 6or 6abri"ation inspe"tion reports.Please (at"- t-e video and do(nload t-e !odel "ontainin) t-e "lonin) te!plate, report and ex"els-eet.

Ed)e preparation details "o!ponent "reates auto!ati"all se"tion vie(s and "-a!6er di!ensions6or parts "ontainin) preparation details. $-e tool needs so!e tunin) in t-e vie( properties 'le tobe usedJ 8 S"ale 8 Si=e needs to be QDe'ne as distan"esQ not as Q't b partsQ 8 Part needs to be seto exa"t i6 ou (ant to s-o( ed)e "-a!6ers 8 Di!ensions "an be also tuned spe"i'"all 6or t-is

tool.


50/60

solution t-at inte)rates $e*la Stru"tures (it- Meridian Prolo) #onver)e.

$-is "o!ponent allo(s ou to rotate t-e bra"e dra(in)s Xin position instead o6 -o( $e*laStru"tures orientates t-e vie(s. / usin) t-is "o!ponent, it is easier to veri6 t-at bra"e detailsand settin)8out points are "orre"t.

$-is appli"ation i!proves t-e usabilit o6 insertin) re6eren"e !odels into $e*la Stru"tures. 4sers"an insert several re6eren"e !odels at on"e, set t-e proBe"t "oordinate sste! in t-e inter6a"e an

auto!ati"all subdivide IF# re6eren"e !odels durin) i!port. 3n"e re6eren"e !odels are inserted,t-e are treated Bust li*e an ot-er re6eren"e !odel. ll tpi"al 'le 6or!ats are supported :D5&,IF#, DW5, et";.

4sers "an ui"*l appl re"tan)ular and "ir"ular brea* lines to obBe"ts b pi"*in) t(o points in t-edra(in). $-is (ill !a*e t-e editin) ti!e o6 dra(in) se"tions and details !u"- 6aster.

$-is tool -elps users !ore ui"*l !ap $e*la "o!ponent 'elds to set up Ex"el desi)n s-eets. 4ser"an vie( a list o6 "o!ponent variable na!es and values (-en sele"tin) a "o!ponent in t-e !ode

$-e list o6 properties "an t-en be "opied and pasted into Ex"el.

$-is appli"ation allo(s "ontra"tors to !ore ui"*l !odel laout points at )rid interse"tions. Pointlabels are auto!ati"all set based on t-e )rid labels. Points "an be o@set in di@erentarran)e!ents. Points "reated are loaded into t-e aout Mana)er 6or export to roboti" totalstations.

4sers "an appl asso"iative notes to obBe"ts in dra(in)s based on nine possible lo"ations relativeto t-e !e!ber axis. ppli"ations in"lude pla"in) end 6or"es on ends o6 !e!bers (it- !ore"ontrol.

$-e uto $as* Suite is an appli"ation 6or runnin) !a"ros auto!ati"all in $e*la Stru"tures a6terper6or!in) "ertain events li*e openin), savin) or nu!berin) a !odel. $-is auto!ation allo(s useto (or* 6aster and (it- less error.

n appli"ation t-at allo(s ou to lin* (eb8sites and do"u!ents to !odel obBe"ts. Plus inte)ration(it- online /uildSite do"u!ents.

$-e 4D ist is a testin), lo"ali=ation and develop!ent tool t-at s-o(s all 4ser De'ned ttributesand values, in"ludin) t-ose (ritten dire"tl b t-e PI, attributes (it-in "o!ponents and t-ose(ritten to !utli8level asse!blies. It also allo(s pur)in) o6 4Ds too.

$-is tool allo(s a user to ui"*l pi"* a plate to (eld to t-en t-e sur6a"e and ed)e o6 anot-er platto auto!ati"all "reate a (eld preparation and pol)on (eld alon) t-at ed)e 6or sin)le and doublbevel )roove (elds.


51/60

#o!pares t(o sele"ted parts or asse!blies, )ivin) a "o!plete -ierar"-ial treevie( tpe list o6 all"ontents and t-eir respe"tive properties. S-o(s di@eren"es bet(een parts>asse!blies in red sot-ere is no !ore )uess (or* to 'nd out (-at is di@erent bet(een t(o obBe"ts.

4sers "an !ore ui"*l s"ale re6eren"e !odels and 2D pd6s dna!i"all (it-in t-e !odel. It isespe"iall use6ul 6or "on"rete "ontra"tors (-o insert 2D pd6s and (is- to s"ale t-e! usin) t-edi!ensions alread s-o(n on t-e pd6.

#reates a -ori=ontal or verti"al "over di!ension 6ro! t-e ed)e o6 a rebar to t-e ed)e o6 "on"rete ia dra(in).

/ar #-e"*er lists all rebar in t-e !odel so t-e user "an "-e"* and 'x rebar properties as needed.Reportin) in several 6or!ats is supported.

Rena!ed Dra(in) Detail Mana)er, t-is appli"ation allo(s users to !ore ui"*l save a(a and

reuse dra(in) se"tions and details on t-eir 2D dra(in)s. See Dra(in) Detail Mana)er 6or versionsprevious to 19.0

$-is tool allo(s users to "reate se"tions and details on 5eneral rran)e!ent :5 tpe dra(in)sui"*l and easil t-rou)- a si!ple inter6a"e. It "ir"u!vents t-e need to identi6, "ut se"tions andde'ne blo(up details b "o!binin) all o6 t-ese pro"esses into one a"tion.

36ten ti!es Stru"tural En)ineers de'ne "olu!n s"-edules (it- "orrespondin) base plate details o

t-eir desi)n dra(in)s. In !an "ases t-e base plate t-i"*ness, (idt-, -ei)-t, nu!ber o6 an"-orrods, and an"-or rod e!bed!ent are "losel related to t-e "olu!n si=e also used in t-e "olu!ns"-edule. $-e /ase Plate ppli"ator allo(s detailers and en)ineers to a""uratel and auto!ati"allappl di@erent base plate "o!ponents and settin)s to a sele"ted )roup o6 "olu!ns in t-e !odel.

$-e "olu!ns !a be di@erent pro'le si=es, si!ilar pro'le si=es but (it- di@erent "lass nu!bers,di@erent rotations, and even di@erent botto! o6 "olu!n elevations et t-e /ase Plate ppli"ator(ill auto!ati"all load t-e appropriate saved base plate settin)s and pla"e t-e base plate at t-ebotto! start point o6 t-e sele"ted "olu!ns t-at !at"- a rule in t-e s"-edule. $-is saves a lot o6ti!e 6or t-e user and -elps in"rease t-e a""ura" o6 t-e appropriate base plate details bein)applied to t-e "orre"t "olu!ns.

$-is tool allo(s a user to sele"t a )roup o6 base plate details :sste! or "usto! "o!ponents; andauto!ati"all )enerate blo(n up se"tions and details on a )eneral arran)e!ent dra(in) based ot-e "onne"tion "odes de'ned on t-e )eneral tab o6 "o!ponent dialo) boxes in t-e !odel.


52/60

4se t-is tool to "reate plan>elevation dra(in)s usin) a sele"ted )rid.

#al"ulate t-e a!ount o6 ed)e preparations needed per plate.

Weldin) $ools is a tool *it 6or easier !odelin) and editin) o6 "o!plex pol)on (elds.

$-is tool "reates "onse"utive bea!s (it- an pro'le and "an be used 6or brid)e !odellin). $-etool uses an external ex"el spreads-eet (-ere ou de'ne start points 6or t-e bea! se)!ents and(-i"- pro'le to use. #usto! pro'les "an be "reated in $e*la Stru"tures. sa!ple !odel:Extrusion$estModel; is atta"-ed to t-e installation pa"*a)e. $-e sa!ple !odel "ontains extensiopresets (it- a "ouple o6 sa!ple pro'les and t(o sa!ple spreads-eets :t-ese are lo"ated in t-e

6older Xex"el in t-e sa!ple !odel 6older;.

tpe part (it-in $e*la Stru"tures. It (ill seuentiall assi)n a nu!ber to ea"- o6 t-e nodes appliedI6 !an o6 t-e sele"ted bea!s -ave si!ilar endpoints, dupli"ate nodes (ill not be "reated. &odes"an be !oved around in t-e !odel or t-rou)- t-e extension inter6a"e, and t-e asso"iated bea!ends (ill 6ollo(. ou "an t-en "reate reports or dra(in)s s-o(in) t-e nodes and t-eir respe"tivenu!bers. $-e node parts are )iven t-e na!e O&3DE and "an be vie(ed (it- a "usto!i=ed vie(

u) ns or "on nuous re n or"e!en o "onseu ve ea!s o !a) na ve s apes. an e use(it- :but is not li!ited to; bea!s "reated (it- /ea! Extruder. i!itationsJ $-e plu)ins "an pro"es!ax 100 input parts in one )o, and t-e bea! seuen"e "annot bend !ore t-an 90 de)rees. $-es"ases "an be rein6or"ed in !ultiple se"tions. &oteJ In t-e Mainbar plu)in ou s-ould use t-e optio

Qsin le barsQ i6 ossible as rebar rou s arent Aexible enou - to 6ollo( "o! lex eo!etr .$-is Extension "al"ulates t-e volu!e o6 t-e bolt -oles t-at a@e"t a part and (rites it into a 4D,/3$Kinvalid!aterial, pro'les, !a*e sure t-at all parts and asse!blies -ave dra(in)s "reated 6or t-e!, loo* 6parts (-i"- are not bolted or "onne"ted.


53/60

$-e pex plu)ins :#o!posite bra"e, Rolled "ans, $apered bea!s>"olu!ns et".;.

$-is little tool -elps ou to 'nd out (-i"- $e*la Stru"tures version (as used to build t-e !odel,"usto! "o!ponent or s*et"-ed pro'le 8 (it-out -avin) $e*la Stru"tures. ust dra)n drop a .db1or .uel 'le to t-e dialo) and )et t-e version in6or!ation displaed.

SDI Export is used 6or exportin) rein6or"e!ent in6or!ation to Steelpa" SDI 6or!at. $-e $e*la

Stru"tures export extension supports SDI 6or!at release 1.H.0. $-e rein6or"e!ent data "an onl bexported 6ro! "ast unit dra(in)s, )eneral arran)e!ent :5; dra(in) is not supported.

$-is extension in"ludes t(o ne( tools. Measure tool allo(s to !easure distan"es bet(een anpoints,ed)es or sur6a"es in t-e !odel. E!bed pla"in) s-o(s a previe( distan"es be6ore"o!ponent is inserted

$-is extension is used to "reate "usto!er "on')uration. Fir! 6older and role 'le (ill be "reated. It

"an also be used to set up "on')uration sent b a "usto!er.

4se t-is extension to "-an)e t-e inputs o6 sele"ted "o!ponents. $-is a"tuall re"reates t-e"o!ponent, so nu!berin) is not *ept.

$-e In8Model Revie(er appli"ation allo(s en)ineers, ar"-ite"ts and "ontra"tors to per6or! a !odebased revie( o6 steel or "on"rete 6abri"ator s-op dra(in) sub!ittals. Fabri"ators "an pa"*a)e upasse!blies or "ast units b sub!ittal and deliver t-e! to t-e revie( tea!. Revie( "o!!ents!ade in t-e $e*la !odel are (ritten to 2d pd6 dra(in)s. Revision -andlin) o6 sub!ittals issupported. $-e In8Model Revie(er (or*s on top o6 all $e*la Stru"tures "on')urations (it-ex"eption to t-e %ie(er. $o learn !ore about t-is pro"ess, please (at"- t-e videos belo( or visit(((.te*la."o!>IMR.


54/60

Plu)in "o!ponent able to "reate O4 s-aped ed)e rein6or"e!ents usin) bent !es-es.

#olu!n S"-eduler "reates and updates )rap-i"al "olu!n s"-edules based on !odel sele"tion.

4se t-is tool to "reate penetration -oles 6or rein6or"e!ent bars in a steel part.

/M$E# is a parti"ularl "ost e@e"tive pro"edure 6or plannin), !anu6a"ture and installation o6sur6a"e rein6or"e!ent 6or rein6or"ed "on"rete slabs, rein6or"ed "on"rete Aoors and rein6or"ed"on"rete (alls. /M$E# ele!ents are used instead o6 nor!al rein6or"e!ent. $-ese "ontainex"lusivel uni axiall installed round steel bars (-i"- are "o!bined into an asse!bl unit usin)transverse steel bands. $-is extension i!ports .$E# produ"tion 'les in order to visuali=e t-e

rein6or"e!ent "arpet in t-e $e*la Stru"tures !odel.

$-is tool allo(s ou to save our navi)ation t-rou)- t-e !odel in perspe"tive !ode, t-en pla itba"* or s"roll t-rou)- it. ou "an save t-e navi)ation to 'le, and load !ultiple saved navi)ation'les 6or later use. $-is is si!ilar to t-e older $e*la Stru"tures Model Revie(er 6un"tionalit (-ereou (ould store our vie(s, t-en press t-e pla button and ou (ould be Ao(n t-rou)- ea"- o6 t-saved vie(s in our !odel.

$-is appli"ation (as desi)ned to pro"ess point "loud data 'les and to !a*e t-ose a""essible in

$e*la Stru"tures. $-e appli"ation allo(s to opti!i=e :do(nsa!ple; point "louds, tri! point "loudsand to split t-e resultin) re6eren"e 'les :DW5, DF; into sin)le pa"*a)es.

$-is plu)8in "an be used to easil rein6or"e an I8/ea! (it- bend !es-es in top and botto! Aan)e,ste! !es-es, u8bars in top Aan)e and lon)itudinal bars alon) t-e bea!.

$-is extension allo(s user to "-e"* individual len)t-s o6 rebars into rebar )roups. It also allo(suser to -andle rebar )roups easil.

$-e Wraparound Di!ensionin) appli"ation -elps "reate di!ensions 6or pipe or tube ends in

(raparound te!plate dra(in)s. $-ese di!ensions "an be used in laout o6 points 6or !anual"uttin) or ualit assuran"e.

$-e addon reports t-e !odel part orientation and related in6or!ation in a dialo), (-i"- ro(s "anbe sorted. t-e user "an eit-er sele"t parti"ular parts in t-e !odel or t-e entire !odel to berevie(ed.

$-is little add8on (as desi)ned to enable savin) t-e $e*la Stru"tures !odel and dra(in) based ona de'ned ti!e intervall. $-e standard auto save 6eature in $e*la Stru"tures (or*s based ona"tivities in t-e !odel or in t-e dra(in) instead.


55/60

4se t-is "o!ponent to "reate no paint area sur6a"in) bet(een parts bolted to)et-er.

#reate t-e snaps-ots 6or t-e sele"ted dra(in)s 6or an open !odel.

Pipe Doubler Plate "onne"tion "reates a doubler plate bet(een !ain part and t-e se"ondar part.

Wit- t-is appli"ation a $e*la Stru"tures user "an install t-e needed "on')uration 'les to be able toutili=e 7D"onnexion devi"es :su"- as Spa"ePilot; (it- $e*la Stru"tures. $-e installation o67D"onnexions o(n driver is not needed.

llo(s ere"tors and 'eld superintendents to pla"e "ranes and ani!ate t-eir !ove!ents 6orplannin) and to prevent "onstru"tion "las-es on t-e Bobsite. $-e user "an si!ulate li6tin)asse!blies and "ast units into pla"e 6ro! a la do(n area. lso a report "an be )enerated s-o(ina list o6 t-e distan"e and (ei)-ts asse!blies are 6ro! t-e "enter o6 t-e to(er "rane. 4se t-is toolin "onBuntion (it- t-e $e*la ni!ator extension. Re6eren"e Model 3bBe"ts "ant be used and ouneed to -ave a !odel aut-orin) "on')uration to use t-is su"- as En)ineerin) or a Detailin)"on')uration. $-is tool onl supports $o(er #ranes not #ra(ler #ranes.

$(o "o!ponents to "reate intelli)ent linear and radial "opies o6 obBe"ts. #-oose t-e dire"tions andintervals to "reate t-e "opies, also "-oose i6 ou (ant to "op onl sele"ted obBe"ts or asso"iatedobBe"ts :to t-e sele"ted obBe"ts;.

4se t-is extended appli"ation to "reate tas*s 6ro! p-ases, 6ro! lots, or 6ro! p-ases (it- "-ildtas*s b lots. $-e asse!blies in t-e p-ase or lot are also added to t-e tas*s.

$-e uto/olt plu)8in -elps in t-e !odelin) o6 bolts in "o!plex situations. uto/olt !a*es bolt"reation easier b auto!ati"all identi6in) t-e best rotation 6or bolts and (ill auto!ati"all 'ndand bolt nearb parts. uto/olt also allo(s t-e user to spe"i6 as one )roup a set o6 bolts (-i"- (ibe split over several parts, su"- as a spli"e "onne"tion.

$-is tool -as been !oved to $e*la Stru"tures installation 6ro! version 20.0 on(ards. ou "an 'nd iin #o!ponent #atalo). #ap Plate Detail "o!ponent "reates a "ap plate to a "olu!n>bea! or a

polbea!.

$-is tool "reates a rin) plate detail around one input part. It "reates a "enter "ut to plate and addsplate to input parts asse!bl b de6ault, but doesnt "reate an (eld:s; 8 please use QWeldin)

$oolsQ Extension 6or a""urate pol)on (eld !odelin). &oteJ 6ter installation t-is detail "an be

started 6ro! #o!ponent #atalo).


56/60

$-is "o!ponent "reates a bolt "onne"tion on t(o "-annel parts.

$-is appli"ation !a*es a "op o6 sele"ted 5 Dra(in)s inside t-e sa!e !odel.

$-is tool is si!ilar to t-e #op 3@set "o!!and 6or lines in !an 2D #D appli"ations. $-is allo(susers to ui"*l "op at an o@set distan"e an bea! 6ra!in) )eo!etr in plan vie(s o6 t-e $e*laStru"tures 7D Model. Installs to 1.0 R#1.

Wit- -elp o6 t-is $e*la Stru"tures extension t-e user "an "-e"* 6or -i)-8stren)t- bolt "onne"tion it-e !odel. In "ase a -i)-8stren)t- bolt "onne"tion is "reated (it- one (as-er instead o6 t(o t-e!issin) se"ond (as-er is added auto!ati"all.

Wit- t-is little tool it is eas to "-e"* part "uts and si=es. $-e part and "ut in6or!ation are s-o(n it-e appli"ation dialo) and "an be saved to a report 'le or to a text 'le.

$-e ne( and i!proved $e*la Stru"tures support tool. $-is ne( version o6 t-e tool in"ludes astrea!lined 4ser Inter6a"e to !a*e "onta"tin) our lo"al $e*la support tea! si!ple.

$-e Fra!e"ad inte)ration extension is a set o6 tools used to inte)rate $e*la Stru"tures andFra!e"ad Detailer usin) Fra!e"ads .'! 'le 6or!at

$-is tool dete"ts (-i"- advan"ed options been "-an)ed in t-e !odel. It does t-is b "o!parin)advan"ed options in t-e open !odel (it- our de6ault advan"ed option settin)s. It onl applies to!odel spe"i'" options.

&e( intuitive 6un"tionalit 6or editin) rebar allo(in) eas !odi'"ation to a""o!!odate "-an)es trebar spa"in), -oo*s, dia!eter and bendin) radius.

Modelin) s-orin) to(ers and de"* supports allo(s "ontra"tors to do sour"in) and s"-edulin) (it-a""urate data instead o6 "al"ulated values. En)ineers -ave a ne( possibilit to add !ore servi"esbased on t-e !odel. Modelin) s-orin) to(ers allo(s ou to "reate a""urate dra(in)s and reports6ro! !odel.

Wit- $e*la Stru"tures 19.0 t-e 4nite"-ni* export "o!ponent obtained a ne( internal "ode nu!beDue to t-is saved settin)s (ill -ave a di@erent nu!ber in t-e 'le extension as (ell. 3penin) a!odel "reated (it- an older version o6 $e*la Stru"tures t-e saved settin)s o6 4nite"-ni* export (ilnot be 6ound. $-e existin) saved settin) 'les !ust be rena!ed to be 6ound 6ro! t-e ne(4nite"-ni* export "o!ponent. $o si!pli6 t-at tas* s!all appli"ation -as been "reated toauto!ati"all !odi6 t-e 'le na!e o6 t-e saved settin)s.


57/60

$-is tool allo(s ou to easil sele"t lines, 6ree pla"ed text (it-out leader lines, pollines,re"tan)les, "louds, pol)ons, "ir"les, 6ree pla"ed s!bols (it-out leader lines, and ar"s and savet-e! a(a into a .dd6 :Dra(in) Detail File; so ou "an insert standard 2D details dra(n on ones-eet to !an ot-er dra(in)s on t-e proBe"t or in ot-er !odels. We are loo*in) 6or 6eedba"* ont-e use "ases and value o6 t-is tool. Please post ratin)s and "o!!ents belo(.

set o6 1H "o!ponents, (-i"- are use6ul 6or detailin) t-e (all "onne"tions. $-e "an also be useto "onne"t t-e !iddle "ast8in8pla"e laers inside t-e double8(alls. $-e (ill (or* onl on panels(it- 2 input points :no polbea! panels;. $-e are !eant to be used (it- t-e Ele!entation tools

$-is tool -as been in"luded in $e*la Stru"tures installation 6ro! version 19.0 on(ards. Detailin) \#o!ponents \ Edit #usto! #o!ponent Dialo) /ox.

$-is is a )eneri" solution 6or extra"tin) report propert or user de'ned attribute data 6ro! t-e$e*la Stru"tures !odel 6or Parts, sse!blies, Re6eren"e Model 3bBe"ts, or a nested sse!bl\Parlist usin) a !odel plu)in vs. dire"tl extra"tin) t-e data 6ro! our external appli"ation. $-e plu)inis used be"ause it is up to 20 6aster t-an s"annin) t-e !odel 6ro! an external .&E$ appli"ation.

$-is is 6or use b developers t-at use t-e $e*la 3pen PI. $-e plu)in s"ans t-e !odel 6or t-e repoor user attribute data and (rites it to an inter!ediate M 'le in our !odel 6older.

Pa"*a)e "ontains t(o s"ripts 6or i!portin) !asses o6 re6eren"e 'les :D5&, DW5, DF, et".;

auto!ati"all, !ultiple 'les or "o!plete 6olders. PDF do"u!ent (it- basi" instru"tion in"luded. ?I"ontains t-e s"ripts 6or version 1G on(ards.

$-ese tools are si!ilar to t-e line editin) 6un"tionalities t-at appear in 2D #D appli"ations butinstead are used 6or bea!s in t-e !odel. $-is allo(s users to utili=e t-ose 6a!iliar tools as t-e!i)rate into !odelin) stru"tural 6ra!in) in t-e 7D environ!ent o6 $e*la Stru"tures. $-ese toolsalso redu"e t-e nu!ber o6 "o!!ands reuired b t-e $e*la Stru"tures user (-en !odi6in)slopin), or s*e(ed 6ra!in) )eo!etr in t-e !odel.

4se t-is tool to "reate and see a previe( o6 a sele"ted dra(in). &oteJ (-en t-e "reation o6 i!a)estarts leave t-e extension 'nis- and dont tr to open ot-er appli"ations (-ile is runnin), ou "an

"an"el t-e pro"ess i6 needed.

$-is $e*la Stru"tures extension (as desi)n to -elp in "onvertin) portable do"u!ent 'les :PDF;,"ontainin) 2D #D dra(in)s, to uto#D DF 'les. $-e resultin) DF 'le "an be used as $e*laStru"tures re6eren"e obBe"t. $-e add8on uses ot-er appli"ations (-i"- need to be installed 'rst.

#elsa Steel Servi"e is one o6 Europes leadin) !anu6a"turers o6 rein6or"e!ent produ"ts. $-eProdu"ts are !anu6a"tured in &or(a, S(eden, Finland and Den!ar*. $-is extension exportsrein6or"e!ent to be 6urt-er pro"essed (it- #elsas rein6or"e!ent report appli"ation 8ar!erin).8ar!erin) is available to do(nload 6ro! #elsa Steel Servi"e (ebsite.


58/60

$-e appli"ation XPoint #loud 2 Re6eren"e File (as desi)ned to trans6er point "louds :?"oordinates; provided as text 'les to $e*la Stru"tures i!portable re6eren"e 'les, utodes* DF orDW5 6or!at. $-e resultin) DF or DW5 'les "an also be used (it- $e*la /IMsi)-t.

$-is little extension (as desi)ned to "-an)e t-e t-i"*ness or t-e -ei)-t o6 a (all ver ui"*, (it-ver !inor user input. ust sele"t (-at to "-an)e, enter t-e ne( value and appl t-e "-an)e.Done.

$-ese are in"luded in $e*la Stru"tures version installation :6ro! $S1+.1 on(ard;. ust i!port t-e#astKInKPla"eKMetri".uel 6ro! ]^environ!ents^"o!!on^"o!ponentsKs*et"-es^#IP^ to "o!ponent"atalo) and start !odelin) 6or!(or*. 4se "o!ponents to "reate evert-in) reuired _in"l. ties,"lips, panels and "la!ps` in basi" ti!ber site 6or!(or*.

$-is $e*la Stru"tures add8on (as desi)ned to !odi6 4nite"-ni* :open inter6a"e 6or t-e pre"astindustr, to trans6er pre"ast pie"e related in6or!ation to pre"ast produ"tion sste!s; exported 'lto suit spe"ial reuire!ents o6 !es- (eldin) !a"-ines and its prepro"essor so6t(are. $-e !aBorpurpose o6 t-e appli"ation is to split 4nite"-ni* !es- data re"ords into sin)le 'les V 4nite"-ni* 'l"an "ontain !ultiple sets o6 !es- per "ast unit, (-i"- -ere(it- (ill be split into sin)le "ast unit'les. In addition 6urt-er 4nite"-ni* spe"i'" data re"ords "an be !odi'ed.

$-e /ea! End Mar* tool "reates dra(in) part !ar*s 6or bea! end 6or"es and !o!ent "onne"tions!bols. $-e 6or"e values and !o!ent "onne"tion in6or!ation is pulled 6ro! t-e bea!s End#onditions user8de'ned attribute tab. $-e user -as t-e Aexibilit to "ontrol t-e !ar* pre'x, suUxand units o6 s-ear, !o!ent and axial 6or"es.

En)ineers and detailers "an !ore e@e"tivel !odel !aterials -andlin) "onveor trusses, to(ersupports and even idler and belt sste!s (it- t-is set o6 "usto! "o!ponents.

%ie( asse!bl "ontents and "o!pare t(o asse!blies based on position nu!bers. &3$DE%E3PED &M3RE, PESE $R S4/S$I$4%E E$E&SI3& O#3MPRE 3/E#$S.

$-is tool allo(s users o6 $e*la Stru"tures to i!port $e*la /IMsi)-t .tbp 'les. $-is supports t-e(or*Ao( (-ere proBe"t parti"ipants (ill be "o!binin), "las- "-e"*in), and "o!!uni"atin) (it-!odels 6ro! !an dis"iplines and /IM appli"ations in $e*la /IMsi)-t but (ant to ta*e advanta)e

t-e bene'ts o6 doin) proBe"t esti!ation, s"-edulin), 'eld laout !ana)e!ent, 6a"ilities!ana)e!ent and deplo!ent, a!on) !an ot-er tas*s usin) $e*la Stru"tures 6or #onstru"tionMana)e!ent. Stru"tural detailers !a also i!port IF# stru"tural desi)n !odels and "onvert t-e!to native parts 6or detailin). &o( it is eas to trans6er t-e (or* 6ro! $e*la /IMsi)-t sea!lessl int

$e*la Stru"tures. I!port 6ro! $e*la /IMsi)-t -as been in"luded in $e*la Stru"tures installation 6roversion 1+.0 on(ards. ou 'nd it in t-e File !enu.

$-is tool allo(s ou to sele"t asse!blies, parts, and bolts in a parti"ular order to "reate a"onstru"tion si!ulation o6 our $e*la Stru"tures proBe"ts.

re!oves t-e need 6or t-e user to "onstantl -ave to load, and appl properties be6ore pla"in) ne

bea!s or !odi6in) existin) bea!s. $-e user "an si!pl sele"t existin) bea!s in t-e !odel, t-endouble "li"* on t-e attributes t-e (ant t-e bea!s to be !odi'ed to, or double "li"* on a pro'let-at t-e (ant t-e bea!s to be !odi'ed to. $-e tool (as desi)ned pri!aril to -elp (it- input o6


59/60

Rin) rein6or"e!ent 6or slab ba.

$ool 6or insertin) tie "o!ponents into sand(i"- asse!bl. 3penin)s are ta*en into a""ount.

$-is tool allo(s users to easil "reate )roup di!ensions on #ast 4nit and 5eneral rran)e!entdra(in)s in t-e "ase (-ere t-ere are !an sin)le rebar or strand obBe"ts in t-e "ast unit t-attraditionall are not auto!ati"all di!ensioned b $e*la Stru"tures and t-e user needs to !anualladd di!ensions to. $-is tool re!oves t-e need to pi"* ea"- o6 t-e rebar di!ension points andauto!ati"all does t-at 6or t-e user.

$-is postpro"essor provides a 'x 6or redu"in) t-e re!ote SD&F issues. $-ese 'les "an be "reatedin PMS, PDMS et" (-ere t-e user !a be usin) real8(orld "o8ordinates to "reate t-eir !odellin)reuire!ents. $-is pro)ra! eit-er sets t-e ori)in :0,0,0; to t-e 'rst ele!ents "oordinates startposition, or allo(s t-e user to de'ne a re!ote re6eren"e position. lso t-e allo(s t-e exported 'leto be trans6ered ba"* to t-e ori)inal position as (ell. See t-e =ip 'le 6or do"u!entation.

$-is tool (ill allo( ou to sele"t "on"rete panels in t-e !odel, and la t-e! do(n -ori=ontall ast-e (ould be poured in t-e 'eld prior to bein) tilted up. $-is tool is use6ul (-en trin) to "al"ula6or! uantities o6 tilt up panels and !ana)in) site laout o6 to be poured panels.

-eld "o!puter te"-nolo) to navi)ate and (or* in t-e !odel usin) 'n)er tou"- and pen stlus"o!!and a"tivation vs. a !ouse driven "ontrol environ!ent. Motion #o!putin) is one sa!ple o6

$ablet P# solution, and t-en usin) appli"ations li*e Des*top #onne"t, or %M(are %ie( #lient ou

order list to "reate a si!ulated installation ani!ation. $-is is use6ul 6or Sales and Pre"onstru"tionpresentations. $-is is si!ilar to t-e $e*la ni!ator ex"ept it (or*s (it- re6eren"e !odel obBe"ts,doesnt reuire user de'ned attributes or obBe"t representation, and "an be used in "onBun"tion(it- t-e reports "reated usin) t-e $e!plate Editor to -elp !a*e auto!ated rules to de'ne t-e

$-is tool allo(s ou to )enerate an obBe"ts.inp 'le to de'ne our o(n "usto! 4ser De'nedttributes and tab pa)es on $e*la Stru"tures parts t-rou)- a )rap-i"al user inter6a"e vs. editin)t-e 'le t-rou)- notepad.

$-e "onverter (as desi)ned to trans6er $e*la Stru"tures Web%ie(er !odels to S$EP and I5ES6or!at, (-i"- are (idel used in t-e Me"-ani"al Desi)n business. Solutions li*e Solid(or*s, #atia,SolidEd)e, Inventor "an read and pro"ess S$EP and I5ES 'les.

Detta pa*et inne-ller e)endesi)nade *o!ponenter 6rn SFS Inte" !ed till-rande rapporter 6ratt lista enbart SFS Inte" *o!ponenter. Det in)r ven -Blp'ler. co!ponenterna r s*apade 6r

$e*la Stru"tures 1H.

llo( ou to (rite and read laout points 6ro! !odel. Enable to i!port and export points 6ro!laout euip!ents e.). $ri!ble M+0 on &o!ad.

$-is tool 'nds and t-en opens t-e various $e*la Stru"tures related 6olders 6or ou based on (-at*ind o6 in6or!ation ou need. $-is ite! is in"luded in $e*la Stru"tures installation startin) 6ro!

versions 1.0 on(ard. ou "an open t-e tool b runnin) t-e Ma"ro Dire"tor/ro(ser 6ro! $ools \Ma"ros


60/60

4pdated )eneral e!beds 6or pre"ast

easi8ed)e Sa6et Solutions -as Boined 6or"es (it- $e*la Stru"tures to provide total "ontrol 6or"usto!ers (-en detailin) ed)e prote"tion.

#ast in pla"e "usto! "o!ponents 6ro! &a!varan "o!pan. ?ip8pa"*a)e in"ludes instru"tionvideos.

$-is appli"ation is desi)ned to "reate S$ :S$ereoit-o)rap-; or %RM :%irtual Realit Modelin)an)ua)e; !odel 'les to be used 6or 7D printin). $-e "onverter (ill read $e*la Stru"tures 7D8DF'les as input 'le. Furt-er in6or!ation on 7D printin) 6ro! -ttpJ>>en.(i*ipedia.or)>(i*i>7DKprintin)

$-e #35 di!ensionin) extension "reates di!ensions and or s!bols to t-e #enter o6 5ravit insin)le part, asse!bl, or "ast unit dra(in) vie(s.

n extension to !odel "on"rete slab toppin) and draina)e. $-is tool is in"luded in $e*la Stru"tureinstallation in version 1.0 and on(ards.

Documents

Tekla Extensions