5
Position: Technician (Logging & Perforating). Company: Halliburton International Inc. (www.halliburton.com ) Duration: July, 2013 - Present. Responsibilities: Making sure all safety precaution equipment is taken. Periodically inspection of all types of open hole-cased hole tools, hand tools, safety equipment, lifting gears, calibration and high pressure equipment. Open hole and cased hole tools and equipment preparation, maintenance, calibration, proper utilization, planning and implementation. Perform all necessary troubleshooting with the tools or the unit as required during or after a job, with proper reporting for the same. Preparation of purchase requisition, follow up and finally check- up of tools and equipments, Evaluate and plan the requirements of spare parts and consumable stock of all systems components. Conducted failure analysis of mechanical & electrical failures as well as unexpected maintenance & operational problems related to tools and equipment. Perform post job service of open and cased hole logging and perforating tools. Down hole tools trouble shooting during tools calibration. Reservoir description tool (RDT) PM1, PM2, PM3 maintenance and troubleshooting (mechanical and electrical part). Perform RDT function test. Testing logging tools after maintenance using INSIT Software. Responsible for open hole and cased hole logging tools schedule maintenance planning and execution. (As for example –PM1, PM2 and PM3). DITS/INSITE down hole tools maintenance and trouble Shooting till component level, Example of open hole tools: SDLT, BSAT, ACRI, ACRS, WSRA, ICT, XRMM, OMRM, MSFL, DLLS,PTMS, D4TG, PTS, HPS, DPS, QGS, FPS, FLID and MCS. Example of auxiliary tools: RWCH, HRCH, MCSA, DTDD, FXIS, FXDS, RCEN, ACNS and CENI, Example of cased hole tools: CBL, CCL, CAST-F, PLT tools (SONDEX tools: AUH001, CFBM031, CFBM032, CFBM033, CFJM008, CFSM024, CTF004, FDI001, FDR020, ILS022, PGR020, PKJ013, PRC017, PRC034, PSJ010, QPC003, QPS019 and free point). Perform all types of DITS & INSITE tools mechanical section

Technician (L&P)

Embed Size (px)

Citation preview

Page 1: Technician (L&P)

Position: Technician (Logging & Perforating). Company: Halliburton International Inc. (www.halliburton.com)Duration: July, 2013 - Present.Responsibilities:

Making sure all safety precaution equipment is taken. Periodically inspection of all types of open hole-cased hole tools, hand tools,

safety equipment, lifting gears, calibration and high pressure equipment. Open hole and cased hole tools and equipment preparation, maintenance,

calibration, proper utilization, planning and implementation. Perform all necessary troubleshooting with the tools or the unit as required

during or after a job, with proper reporting for the same. Preparation of purchase requisition, follow up and finally check-up of tools

and equipments, Evaluate and plan the requirements of spare parts and consumable stock of all systems components.

Conducted failure analysis of mechanical & electrical failures as well as unexpected maintenance & operational problems related to tools and equipment.

Perform post job service of open and cased hole logging and perforating tools. Down hole tools trouble shooting during tools calibration. Reservoir description tool (RDT) PM1, PM2, PM3 maintenance

and troubleshooting (mechanical and electrical part). Perform RDT function test. Testing logging tools after maintenance using INSIT Software. Responsible for open hole and cased hole logging tools schedule maintenance

planning and execution. (As for example –PM1, PM2 and PM3). DITS/INSITE down hole tools maintenance and trouble

Shooting till component level, Example of open hole tools: SDLT, BSAT, ACRI, ACRS, WSRA, ICT, XRMM, OMRM, MSFL, DLLS,PTMS, D4TG, PTS, HPS, DPS, QGS, FPS, FLID and MCS. Example of auxiliary tools: RWCH, HRCH, MCSA, DTDD, FXIS, FXDS, RCEN, ACNS and CENI, Example of cased hole tools: CBL, CCL, CAST-F, PLT tools (SONDEX tools: AUH001, CFBM031, CFBM032, CFBM033, CFJM008, CFSM024, CTF004, FDI001, FDR020, ILS022, PGR020, PKJ013, PRC017, PRC034, PSJ010, QPC003, QPS019 and free point).

Perform all types of DITS & INSITE tools mechanical section function test. Maintained all tools maintenance, spare parts and other record by SAP

system. Example: PR05 - Travel Expense Manager, MMBE - Stock Overview, IH08 - Display Equipment, IW29 - Display Notifications, IW28 - Change Notifications, IW21 - Create PM Notification – General, MD04 - Display Stock/Requirements Situation, MB21 - Create Reservation, MB22 - Change Reservation, MB23 - Display Reservation, MIGO - Goods Movement, ME2N - Purchase Orders by PO Number, MB51 - Material Doc. List, ME23N - Display Purchase Order, ME2M - Purchase Orders by Material , MB03 - Display Material Document , ME53N - Display Purchase Requisition, ME23 - Display Purchase Order, MIGO - Goods Movement, IW24 - Create PM Malfunction Report , IW25 - Create PM Activity Report, IW26 - Create Maintenance Request , IW31 - Create

Order, IW32 - CHANGE ORDER, IW39 - Display PM orders, IW27 - Set deletion

flag f. PM notification, IW34 - PM Order for PM Notification, IW30 - Notification

Page 2: Technician (L&P)

List (Multi-Level), IW36 - Create PM Sub-Order, IW37 - Change Operations, IW38 - Change PM Orders, IW40 - Display Orders (Multi-Level), IW41 - Enter

PM Order Confirmation, IW43 - Display PM Order Confirmation, IW44 - PM

Order Collective Confirmation, IW45 - Cancel PM Order Confirmation, IW46 -

Post processing of PDC Error Records, IW47 - Confirmation List, IW49 - Display

Operations, IW58 - Change Service Notifications, CAT2 - Time Sheet: Maintain

Times, ZMQSZ - User Group MM, Query SZ, ZAEX3 - Display AMI Transfer

Document, ZMCL - Material Contact Plant report, IE02 - Change Equipment,

IE07 - Equipment List (Multi-level), ZMR1 - Reservations Report, MB03 -

Display Material Document, IW27 - Set deletion flag f. PM notification. Responsible for upgrade all NOM and OEB. Responsible for spare parts inventory and order spare parts for next

maintenance. Good understanding of drilling, logging & perforation operations and

processes. Good understanding of health, safety and environment policies in the oil and

gas industry. Effective communication skills and a team player. Quick adaptation to job specific roles or trainings under professional

mentoring processes in place and a culture of team work.

RDT – (HPS, DPS, QGS, FPS, FLID & MCS). PM1 and Post job service. PM2 and PM3 maintenance. Fault finding & trouble shooting. Function test using insit software. Parameters data analyses and record keeping. Participate in unplanned maintenance.

Calliper Tools – (SDLM, MSFM, ICT, OMRM & XRMM) PM1 and Post job service. PM2 and PM3 maintenance. Fault finding & trouble shooting. Function test using insit software. Parameters data analyses and record keeping. Participate in unplanned maintenance.

SONDEX Tools PM1 and Post job service. PM2 and PM3 maintenance. Fault finding & trouble shooting. Function test. Parameters data analyses and record keeping. Participate in unplanned maintenance.

Auxiliary Tools – (RWCH, MCSA, DTDD, FXIS, FXDS, RCEN & CENI) PM1 and Post job service. PM2 and PM3 maintenance. Fault finding & trouble shooting. Parameters data analyses and record keeping. Participate in unplanned maintenance.

Page 3: Technician (L&P)

Vacuum System Operate vacuum system. Vacuum tool and oil fill. Vacuum system maintenance.

Test box Text tool using test box (Example: RDT test box, SDLM, MSFM, OMRM, XRMM

and cast test box. Test box maintenance.

Training course: Personal Protective Equipment (PPE).Duration: 12th May, 2014 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Radiation General Awareness Duration: 27th Aug, 2013 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Shell Halliburton Life Saving Rules. Duration: 04th Sep, 2013 – (1.5 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Substance Abuse Drug Free Workplace. Duration: 04th Sep, 2013 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Wireline and Perforating Red Zone Safety. Duration: 19th Sep, 2013 – (2.5 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Hazard Communication. Duration: 04th Sep, 2013 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Halliburton Dropped Objects Training. Duration: 03rd Apr, 2014 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Explosive General Awareness. Duration: 06th Sep, 2013 – (2 Hours).

Page 4: Technician (L&P)

Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Ergonomics General Awareness. Duration: 03rd Sep, 2013 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Environmental Awareness. Duration: 28th Aug, 2013 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.

Training course: Blood borne Pathogens. Duration: 1st Sep, 2013 – (2 Hours). Training Location: Halliburton University. Company: Halliburton International Inc. Bangladesh.