Embed Size (px)
Citation preview
Gate Sizing And Price Chart
PAIRED LADDER SAFETY GATE All Materials & Finishes (PCY/GAL/SS)
701.746.4519 | 877.446.1519 | www.pssafetyaccess.com | [email protected]
Fits Opening Dimension Powder Coat Yellow - PCY
Hot-Dip Galvanized - GAL
Stainless Steel (304) - SS
Product Number* Min Max Price Each Price Each Price Each
LSGDBL-9 18" 22-1/2" $412 $412 $635
LSGDBL-12 22" 28-1/2" $418 $418 $638
LSGDBL-15 28" 34-1/2" $425 $425 $642
LSGDBL-18 34" 40-1/2" $431 $431 $645
LSGDBL-21 40" 46-1/2" $437 $437 $648
LSGDBL-24 46" 52-1/2" $444 $444 $652
* For a specific product, indicate the finish abbreviation at the end of the Product Number (example: LSGDBL-9-PCY)
Price ListTechnical Data
101 /1
6"14
15/16
"
221 /4
"
3 5 /8"
1"
3 5 /8"
Opening Dimension
Stainless Steel (304)Powder Coat Yellow Hot-Dip Galvanized
Rev: 07.11.18
Gate Sizing Chart
Gate Construction:• Gate: 1-1/4", 11-gauge* square tubing. Minimum dimension from top of gate arm to bottom of gate arm is 22-1/4".
• Mounting Bracket: Universal mounting bracket fits round railings up to 2" O.D. and square railings up to 1-1/2" square. Bracket is adaptable to bolt to flat surfaces.
• Hinge Plate: 10 gauge, full height of gate. Hinge plate provides for gate adjustment of 3-3/4", (-)1-1/4" to (+)2-1/2".
• Standard Hardware: Square U-bolts, flat washers, nuts, plastic thread protector cap and support channel.
• Springs: Torsion type, stainless steel. Minimum of two (2) springs per gate, housed within hinge pivot.
• Material & Finish: To be one of the following, based on model: - Mild steel, powder coat yellow. Hardware to be zinc plated. - Mild steel, hot dip galvanized. Hardware to be zinc plated. - Stainless steel, 304-2b, unpainted. Hardware to be stainless steel type 316. - Stainless steel, 16 gauge, unpainted. Hardware to be stainless steel type 316.• Gate Operation: Allows for 180° travel. Gate swing direction is reversible by inverting or rotating.• Packaging: Carton includes two gates, standard mounting hardware and Installation/O&M Manual.• Warranty: 1 Year Limited.
*Stainless steel, 16-gauge square tubing.
PAIRED LADDER SAFETY GATE All Materials & Finishes (PCY/GAL/SS)
Fits Opening Dimension
Product Number Min Max
LSGDBL-9 18" 22-1/2"
LSGDBL-12 22" 28-1/2"
LSGDBL-15 28" 34-1/2"
LSGDBL-18 34" 40-1/2"
LSGDBL-21 40" 46-1/2"
LSGDBL-24 46" 52-1/2"
Technical Data
PS DOORS
3" SECTION OF 2"SQ TUBE
5/15" BOLTS TO ATTACHHINGE BRACKETS TO ANGLEPROVIDED BY OTHERS
REVISIONSREV. DATE REVISED BY
DATE:
SHEET #:DWG #:
1150 48th St. SGRAND FORKS, ND 58201
PH. 701-746-4519FAX 701-746-8340
4/13/2017
1 OF 1
SCALE: NTSSOLD TO:
CUST PO #:
PROJECT NAME:
SALES ORDER #:
SHIP TO:
B
DOOR/OPENING NAME:
PAIRED STOP SUPPORT ON ANGLEC:\U
sers
\cst
ombe
rg\D
eskt
op\P
AIR
ED S
TOP
SUPP
OR
T O
N A
NG
LE;
4/1
3/20
17
DWG STATUS:
FINISH:
cstombergESTIMATED PART/ASSY WEIGHT: 42 LBS.
SN:
DWG BY:
CHECKED: /
QTY: 1
PROPRIETARY AND CONFIDENTIAL DRAWINGS ARE EXCLUSIVE PROPERTY OF PRODUCTION SPECIALTIES CORPORATION, dba PS DOORS AND CANNOT BE USED IN WHOLE OR PART WITHOUT WRITTEN CONSENT © 2017 PS DOORS ALL RIGHTS RESERVED
Standard UniversalHinge Bracket
Built-In Positive Stop Hinge Detail
AdjustabilityWide-Angle Swing
Flat Mount Option
101 /1
6"14
15/16
"
221 /4
"
3 5 /8"
1"
3 5 /8"
Opening Dimension
(-)1-1/4" to (+)2-1/2" Per Gate
Anchors and 1/4" wall 3"x2" square tube provided by others
701.746.4519 | 877.446.1519 | www.pssafetyaccess.com | [email protected] Rev: 07.11.18
