The intelligent building system oftomorrow...today

Tebis TX

Welcome to the Tebis TX home automation system. This

brochure is designed to give you an insight into the benefits of

home automation.

If you require further information or have any questions please

don’t hesitate to contact us (see information on the reverse).

Alternatively you can find more information on our website:

www.hager.co.uk

Tebis TX7 good reasons to choose Tebis TX1. For your comfort• From the main entrance,

switch on or off all lights• Switch any light from

several places in a room• Switch & dim from

anywhere, using a remote control

• Set a scene with one button : for home-theatre, lights for dinner, children’s rooms that don’t need full lighting, minimum lighting at night (e.g; toilets, kitchen)

2. For a “touch of class”• A switch mounted on any

surface (e.g. on glass, under a table) without cabling

• In room LCD display of temperature, state or circuits etc, with switches incorporated

3. For automation• Corridor or passage lights

can be switched automatically, on a timer, using presence detectors or a light sensitive cell

• A single switch to raise or lower shutters or sunblinds

• Remote-opening of your garage door

4. For your security andpeace of mind• Presence simulation during

absence• From your bed, switch on

all corridor lights and exterior lights

5. For your safety and safetyof others• Reduced risk of

electrocution, by use of thevery low voltage (29V) on all switches

• Lower shutters andawnings in case of highwinds

6. For energy-saving• Switch-off lights, heating or

cooling when leaving• Light corridors and other

common areas only when required using presence detectors

7. For future-proofing, flexibility and freedom• Any brand, design or finish

of wall switches and accessories can be used

• Be free from fixing everything at the initial planning stage : each switch or input can control any one or several outputs and can be modified, at any time

• Nothing is definitive, - always have the right switch in the right place (add switches where and whenever needed) - modify scene-settings more easily than moving furniture- complete the installation over time, as budget permits

• When installing a new switch, no need to re-decorate: batterypowered switches can be installed at any time, without wiring

and finally...

Peace of mind for the future :Tebis TX from Hager means 20years experience of homeautomation and the guaranteethat only a top-quality world-leader can offer

Consumer expectations for increased control of

lighting, security and heating continue to rise. Tebis TX offers

simple solutions allowing installations to offer

benefits that a traditional electrical installation cannot provide.

Tebis TX respects usual installation habits. Electrical

contractors can continue to use familiar materials and gain

precious time in planning, then wiring, as there is only one cable

connecting each push button to the next. Right up to - and after

- completion of wiring, you can choose which switch controls

which light : the building user can decide at the last minute, or

change their mind at any time in the future with minimum fuss.

Tebis TX uses the technology ofthe installation bus for the controlof lighting, heating and roller-shutters or other similarloads, in both residential and commercial applications.

ComfortHome automation with Tebis TX

Tebis TX givesyou theadvancedcontrol youneed

• Lighting control

• Shutter control

• Heating control

And in addition to the individual controls eachTebis TX product offers,Tebis TX also allows simultaneous control ofserveral different loads fromone push-button or sensor.This provides the benefit ofconfigurable scenarios.

Imagine being able to turnall your lights off at thetouch of one button whenleaving the home.

Conventional installation - Vs -Intelligent building system technologyConsumer expectations for increased control of lighting, security

and heating continue to rise. With this demand on the increase,

there is a need for simple intelligent building system technology

in the modern home. Conventional lighting and power

distribution will continue to be the most common choice in

smaller residential developments, however consideration must

be given to the changing needs of the home over time. Simple

Intelligent building systems enable changes to be made with

ease.

The digital age of residential building controlIntelligent building system technology is proven technology

within commercial, retail and office developments.

Electrical contractors are already using this technology in

residential properties throughout Europe.

The next genera

The future home: whyshould houses be intelligent?

Intelligent building system Wiring simplicity is one of the key advantages of this type of

system. It requires the installation of only one control cable.

Power is connected directly to the load (i.e. lighting) with all

control achieved through the control cabling. When switching on

(e.g Push button), an instruction is sent to switch power to your

chosen light or equipment. This gives you the benefit that

changs can be made at any time to enable you to control any

light or piece of equipment from any switch. You can easily add

an additional switch to the system, if the property is extended

for example. Providing the future flexibility essential for todays

installations.

System differences: a comparison

Building systems technologytoday

Energy SavingSystems can reduce theunnecessary energy usageof your home thus minimising the impact onthe environment.

SimplicityNo longer is there a need forcomplicated PCprogramming of BuldingSystems. Commisioning canbe achieved using a simplehand held programmer.

Increasing ExpectationsTechnology is constantlyevolving and so are thedemands on our homes.Systems of today aredesigned such that add onsand modifications can bemade with ease.

Proven TechnologyEIB / KNX is well established throughoutEurope with numerousinstallations in both residential and commercialproperties. This protocolenables intergration of different manufacturersequipment to suit your project requirments.

ation

Conventional installationsConventional installations use lots of cables in runs, back and

forth to wall switches. Power must be fed everywhere

throughout the building for control. The switches isolate the

power on the way to the light fittings, switching them on and off.

Once the first fix is complete, last minute alterations can be

disruptive and costly.

Intelligent building system technology: the electrical installation that meets andexceeds the desires of the homeowner. In the past, the functionality of electrical systems came with

many constraints. Homeowners today expect higher flexibility in

the home to cope with changing circumstances. Tebis TX

provides the technical infrastructure within the home to change

and evolve with your needs. With intelligent building system

technology, functional changes cause relatively little additional

expenditure during the construction/ installation phases. If the

switches are fitted and are then moved, all the functions can be

changed as desired. Expensive, time-consuming installation of

new cables is no longer necessary. The same applies to

additions to the system after completion.

Radio frequency (RF) technology products can be used to

expand the system without the need for the addition of any extra

cabling. Switches can be located anywhere in the building.

Attractive accessories allow you to visualize your system status

and to interface at the touch of a button.

Use and costs

Yesterday’s vision, today’sproven standard

smoke alarm

fire alarmpresence detectors

Why should Ichoose intelligent building system technology formy home?

Tebis TX from Hager provides you with the security of a major Europeanexpert in intelligent electricalinstallations.

Energy efficiencyEnergy costs are rising andTebis TX can offer the technology to realise trueenergy savings throughautomation.

Return on investmentThe housing market is verycompetitive. An intelligentbuilding system can helpyou sell your home in thefuture by providing the functionality home ownersare looking for today andthe future.

Future proofingYou can change and adaptthe functionality of yourhome over time with ease.As your life evolves, so canyour home.

ScenariosControl commands can beat the touch of one button.For instance when watchinga DVD you may want to dimthe lights, close the blindsand bring down the projector screen. With TebisTX this can be achieved withone command.

Log onto www.hager.co.ukto see Tebis TX in action.

As a family grows, newrequirements come andgo. Different switching andcontrol needs arise.

Ease of configuration:No PC is required to configure or control the system

How will your home cope with thischange?How do you integrate future comfort or safety needs in the life

cycle of the property? Changes to the property don’t necessarily

need to mean major refurbishment (such as shifting walls

around), but homeowner’s requirements do change over time.

This normally means certain aspects of the electrical installation

may have to change (Security may need upgrading, changes to

decor or additional comfort features may be required). Thus the

infrastructure itself has to adapt. With Tebis TX intelligent

building system technology, new integration can be achieved

easily. As the electrical infrastructure is already installed, all the

electrician has to do is add input and output devices (e.g. push

buttons and light fittings) and the system can be easily

programmed to suit your needs.

Integration

The possibilites are endless; however here are two simple scenarios:

heating / climate control

alarm

washing machine

interior lighting

blinds

garage door

Exit Scenario:How many time have you left the house and accidentally left a

light on? An exit scenario could be configured such that on

leaving your home, one button can be pressed to turn off all

your lights.

Childrens Bedroom:A switch for your child to illuminate all lights to the bathroom.

On getting up your child operates a switch mounted close to

their bed. This switch turns on their bedroom light, the hall light

and the bathroom light. On returning to bed at the push of one

button all the lights are turned off.

Hager Ltd.Hortonwood 50 TelfordShropshireTF1 7FT

Sales Hotline Call our Customer Services 0870 240 2400Centre for all your national sales@hager.co.uksales enquiries.

Sales Faxline 0870 240 0400

Technical Helpline Technical Engineers offer both 0870 607 6677national and local support. technical@hager.co.uk

Technical Faxline 01952 675557

Hager Online Visit our website for up to date www.hager.co.uknews on Hager and for general info@hager.co.ukbrand information e-mail us.

Hager Ltd. Unit M2 Furry Park Industrial Estate Swords Road Santry Dublin 9Ireland

Northern Ireland

Tel: 028 9077 3310 Fax: 028 9073 3572

Republic of Ireland

Tel: 1890 551 502 Fax: 1890 551 503

info@hager.ie

My project requirements

Project Name:

Address:

Contact Details:

Project Start Date:

Type of Project:

Installer Details:

New Build Refurbishment

Appartment House Other

Other specific requirements;

This form is available to download and complete online at www.hagergroup.co.uk

No. of bedrooms 1 2 3 4 +

Grouped control

Dimming

Wirefree switches

Presence detection

Scene settings

Remote controlinterface

Multi-way switching

Scheduling

Alarm

Blinds / Curtains

Roller shutters

Garage door